1b6bc94d5d
During migration, QEMU uses fsync()/fdatasync() on the open file descriptor for read-write block devices to flush data just before stopping the VM. However, fsync() on a scsi-generic device returns -EINVAL which causes the migration to fail. This patch skips flushing data in case of an SG device, since submitting SCSI commands directly via an SG character device (e.g. /dev/sg0) bypasses the page cache completely, anyway. Note that fsync() not only flushes the page cache but also the disk cache. The scsi-generic device never sends flushes, and for migration it assumes that the same SCSI device is used by the destination host, so it does not issue any SCSI SYNCHRONIZE CACHE (10) command. Finally, remove the bdrv_is_sg() test from iscsi_co_flush() since this is now redundant (we flush the underlying protocol at the end of bdrv_co_flush() which, with this patch, we never reach). Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1435056300-14924-3-git-send-email-dimara@arrikto.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2577 lines
76 KiB
C
2577 lines
76 KiB
C
/*
|
|
* Block layer I/O functions
|
|
*
|
|
* Copyright (c) 2003 Fabrice Bellard
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "trace.h"
|
|
#include "block/blockjob.h"
|
|
#include "block/block_int.h"
|
|
#include "block/throttle-groups.h"
|
|
#include "qemu/error-report.h"
|
|
|
|
#define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
|
|
|
|
static BlockAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
|
|
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
|
|
BlockCompletionFunc *cb, void *opaque);
|
|
static BlockAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
|
|
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
|
|
BlockCompletionFunc *cb, void *opaque);
|
|
static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors,
|
|
QEMUIOVector *iov);
|
|
static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors,
|
|
QEMUIOVector *iov);
|
|
static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
|
|
int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
|
|
BdrvRequestFlags flags);
|
|
static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
|
|
int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
|
|
BdrvRequestFlags flags);
|
|
static BlockAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
|
|
int64_t sector_num,
|
|
QEMUIOVector *qiov,
|
|
int nb_sectors,
|
|
BdrvRequestFlags flags,
|
|
BlockCompletionFunc *cb,
|
|
void *opaque,
|
|
bool is_write);
|
|
static void coroutine_fn bdrv_co_do_rw(void *opaque);
|
|
static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
|
|
|
|
/* throttling disk I/O limits */
|
|
void bdrv_set_io_limits(BlockDriverState *bs,
|
|
ThrottleConfig *cfg)
|
|
{
|
|
int i;
|
|
|
|
throttle_group_config(bs, cfg);
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
qemu_co_enter_next(&bs->throttled_reqs[i]);
|
|
}
|
|
}
|
|
|
|
/* this function drain all the throttled IOs */
|
|
static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
|
|
{
|
|
bool drained = false;
|
|
bool enabled = bs->io_limits_enabled;
|
|
int i;
|
|
|
|
bs->io_limits_enabled = false;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
|
|
drained = true;
|
|
}
|
|
}
|
|
|
|
bs->io_limits_enabled = enabled;
|
|
|
|
return drained;
|
|
}
|
|
|
|
void bdrv_io_limits_disable(BlockDriverState *bs)
|
|
{
|
|
bs->io_limits_enabled = false;
|
|
bdrv_start_throttled_reqs(bs);
|
|
throttle_group_unregister_bs(bs);
|
|
}
|
|
|
|
/* should be called before bdrv_set_io_limits if a limit is set */
|
|
void bdrv_io_limits_enable(BlockDriverState *bs, const char *group)
|
|
{
|
|
assert(!bs->io_limits_enabled);
|
|
throttle_group_register_bs(bs, group);
|
|
bs->io_limits_enabled = true;
|
|
}
|
|
|
|
void bdrv_io_limits_update_group(BlockDriverState *bs, const char *group)
|
|
{
|
|
/* this bs is not part of any group */
|
|
if (!bs->throttle_state) {
|
|
return;
|
|
}
|
|
|
|
/* this bs is a part of the same group than the one we want */
|
|
if (!g_strcmp0(throttle_group_get_name(bs), group)) {
|
|
return;
|
|
}
|
|
|
|
/* need to change the group this bs belong to */
|
|
bdrv_io_limits_disable(bs);
|
|
bdrv_io_limits_enable(bs, group);
|
|
}
|
|
|
|
void bdrv_setup_io_funcs(BlockDriver *bdrv)
|
|
{
|
|
/* Block drivers without coroutine functions need emulation */
|
|
if (!bdrv->bdrv_co_readv) {
|
|
bdrv->bdrv_co_readv = bdrv_co_readv_em;
|
|
bdrv->bdrv_co_writev = bdrv_co_writev_em;
|
|
|
|
/* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
|
|
* the block driver lacks aio we need to emulate that too.
|
|
*/
|
|
if (!bdrv->bdrv_aio_readv) {
|
|
/* add AIO emulation layer */
|
|
bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
|
|
bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
|
|
}
|
|
}
|
|
}
|
|
|
|
void bdrv_refresh_limits(BlockDriverState *bs, Error **errp)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
Error *local_err = NULL;
|
|
|
|
memset(&bs->bl, 0, sizeof(bs->bl));
|
|
|
|
if (!drv) {
|
|
return;
|
|
}
|
|
|
|
/* Take some limits from the children as a default */
|
|
if (bs->file) {
|
|
bdrv_refresh_limits(bs->file, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
|
|
bs->bl.max_transfer_length = bs->file->bl.max_transfer_length;
|
|
bs->bl.min_mem_alignment = bs->file->bl.min_mem_alignment;
|
|
bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
|
|
} else {
|
|
bs->bl.min_mem_alignment = 512;
|
|
bs->bl.opt_mem_alignment = getpagesize();
|
|
}
|
|
|
|
if (bs->backing_hd) {
|
|
bdrv_refresh_limits(bs->backing_hd, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
bs->bl.opt_transfer_length =
|
|
MAX(bs->bl.opt_transfer_length,
|
|
bs->backing_hd->bl.opt_transfer_length);
|
|
bs->bl.max_transfer_length =
|
|
MIN_NON_ZERO(bs->bl.max_transfer_length,
|
|
bs->backing_hd->bl.max_transfer_length);
|
|
bs->bl.opt_mem_alignment =
|
|
MAX(bs->bl.opt_mem_alignment,
|
|
bs->backing_hd->bl.opt_mem_alignment);
|
|
bs->bl.min_mem_alignment =
|
|
MAX(bs->bl.min_mem_alignment,
|
|
bs->backing_hd->bl.min_mem_alignment);
|
|
}
|
|
|
|
/* Then let the driver override it */
|
|
if (drv->bdrv_refresh_limits) {
|
|
drv->bdrv_refresh_limits(bs, errp);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* The copy-on-read flag is actually a reference count so multiple users may
|
|
* use the feature without worrying about clobbering its previous state.
|
|
* Copy-on-read stays enabled until all users have called to disable it.
|
|
*/
|
|
void bdrv_enable_copy_on_read(BlockDriverState *bs)
|
|
{
|
|
bs->copy_on_read++;
|
|
}
|
|
|
|
void bdrv_disable_copy_on_read(BlockDriverState *bs)
|
|
{
|
|
assert(bs->copy_on_read > 0);
|
|
bs->copy_on_read--;
|
|
}
|
|
|
|
/* Check if any requests are in-flight (including throttled requests) */
|
|
static bool bdrv_requests_pending(BlockDriverState *bs)
|
|
{
|
|
if (!QLIST_EMPTY(&bs->tracked_requests)) {
|
|
return true;
|
|
}
|
|
if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
|
|
return true;
|
|
}
|
|
if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
|
|
return true;
|
|
}
|
|
if (bs->file && bdrv_requests_pending(bs->file)) {
|
|
return true;
|
|
}
|
|
if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* Wait for pending requests to complete on a single BlockDriverState subtree
|
|
*
|
|
* See the warning in bdrv_drain_all(). This function can only be called if
|
|
* you are sure nothing can generate I/O because you have op blockers
|
|
* installed.
|
|
*
|
|
* Note that unlike bdrv_drain_all(), the caller must hold the BlockDriverState
|
|
* AioContext.
|
|
*/
|
|
void bdrv_drain(BlockDriverState *bs)
|
|
{
|
|
bool busy = true;
|
|
|
|
while (busy) {
|
|
/* Keep iterating */
|
|
bdrv_flush_io_queue(bs);
|
|
busy = bdrv_requests_pending(bs);
|
|
busy |= aio_poll(bdrv_get_aio_context(bs), busy);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Wait for pending requests to complete across all BlockDriverStates
|
|
*
|
|
* This function does not flush data to disk, use bdrv_flush_all() for that
|
|
* after calling this function.
|
|
*
|
|
* Note that completion of an asynchronous I/O operation can trigger any
|
|
* number of other I/O operations on other devices---for example a coroutine
|
|
* can be arbitrarily complex and a constant flow of I/O can come until the
|
|
* coroutine is complete. Because of this, it is not possible to have a
|
|
* function to drain a single device's I/O queue.
|
|
*/
|
|
void bdrv_drain_all(void)
|
|
{
|
|
/* Always run first iteration so any pending completion BHs run */
|
|
bool busy = true;
|
|
BlockDriverState *bs = NULL;
|
|
GSList *aio_ctxs = NULL, *ctx;
|
|
|
|
while ((bs = bdrv_next(bs))) {
|
|
AioContext *aio_context = bdrv_get_aio_context(bs);
|
|
|
|
aio_context_acquire(aio_context);
|
|
if (bs->job) {
|
|
block_job_pause(bs->job);
|
|
}
|
|
aio_context_release(aio_context);
|
|
|
|
if (!aio_ctxs || !g_slist_find(aio_ctxs, aio_context)) {
|
|
aio_ctxs = g_slist_prepend(aio_ctxs, aio_context);
|
|
}
|
|
}
|
|
|
|
while (busy) {
|
|
busy = false;
|
|
|
|
for (ctx = aio_ctxs; ctx != NULL; ctx = ctx->next) {
|
|
AioContext *aio_context = ctx->data;
|
|
bs = NULL;
|
|
|
|
aio_context_acquire(aio_context);
|
|
while ((bs = bdrv_next(bs))) {
|
|
if (aio_context == bdrv_get_aio_context(bs)) {
|
|
bdrv_flush_io_queue(bs);
|
|
if (bdrv_requests_pending(bs)) {
|
|
busy = true;
|
|
aio_poll(aio_context, busy);
|
|
}
|
|
}
|
|
}
|
|
busy |= aio_poll(aio_context, false);
|
|
aio_context_release(aio_context);
|
|
}
|
|
}
|
|
|
|
bs = NULL;
|
|
while ((bs = bdrv_next(bs))) {
|
|
AioContext *aio_context = bdrv_get_aio_context(bs);
|
|
|
|
aio_context_acquire(aio_context);
|
|
if (bs->job) {
|
|
block_job_resume(bs->job);
|
|
}
|
|
aio_context_release(aio_context);
|
|
}
|
|
g_slist_free(aio_ctxs);
|
|
}
|
|
|
|
/**
|
|
* Remove an active request from the tracked requests list
|
|
*
|
|
* This function should be called when a tracked request is completing.
|
|
*/
|
|
static void tracked_request_end(BdrvTrackedRequest *req)
|
|
{
|
|
if (req->serialising) {
|
|
req->bs->serialising_in_flight--;
|
|
}
|
|
|
|
QLIST_REMOVE(req, list);
|
|
qemu_co_queue_restart_all(&req->wait_queue);
|
|
}
|
|
|
|
/**
|
|
* Add an active request to the tracked requests list
|
|
*/
|
|
static void tracked_request_begin(BdrvTrackedRequest *req,
|
|
BlockDriverState *bs,
|
|
int64_t offset,
|
|
unsigned int bytes, bool is_write)
|
|
{
|
|
*req = (BdrvTrackedRequest){
|
|
.bs = bs,
|
|
.offset = offset,
|
|
.bytes = bytes,
|
|
.is_write = is_write,
|
|
.co = qemu_coroutine_self(),
|
|
.serialising = false,
|
|
.overlap_offset = offset,
|
|
.overlap_bytes = bytes,
|
|
};
|
|
|
|
qemu_co_queue_init(&req->wait_queue);
|
|
|
|
QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
|
|
}
|
|
|
|
static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
|
|
{
|
|
int64_t overlap_offset = req->offset & ~(align - 1);
|
|
unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
|
|
- overlap_offset;
|
|
|
|
if (!req->serialising) {
|
|
req->bs->serialising_in_flight++;
|
|
req->serialising = true;
|
|
}
|
|
|
|
req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
|
|
req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
|
|
}
|
|
|
|
/**
|
|
* Round a region to cluster boundaries
|
|
*/
|
|
void bdrv_round_to_clusters(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors,
|
|
int64_t *cluster_sector_num,
|
|
int *cluster_nb_sectors)
|
|
{
|
|
BlockDriverInfo bdi;
|
|
|
|
if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
|
|
*cluster_sector_num = sector_num;
|
|
*cluster_nb_sectors = nb_sectors;
|
|
} else {
|
|
int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
|
|
*cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
|
|
*cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
|
|
nb_sectors, c);
|
|
}
|
|
}
|
|
|
|
static int bdrv_get_cluster_size(BlockDriverState *bs)
|
|
{
|
|
BlockDriverInfo bdi;
|
|
int ret;
|
|
|
|
ret = bdrv_get_info(bs, &bdi);
|
|
if (ret < 0 || bdi.cluster_size == 0) {
|
|
return bs->request_alignment;
|
|
} else {
|
|
return bdi.cluster_size;
|
|
}
|
|
}
|
|
|
|
static bool tracked_request_overlaps(BdrvTrackedRequest *req,
|
|
int64_t offset, unsigned int bytes)
|
|
{
|
|
/* aaaa bbbb */
|
|
if (offset >= req->overlap_offset + req->overlap_bytes) {
|
|
return false;
|
|
}
|
|
/* bbbb aaaa */
|
|
if (req->overlap_offset >= offset + bytes) {
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
|
|
{
|
|
BlockDriverState *bs = self->bs;
|
|
BdrvTrackedRequest *req;
|
|
bool retry;
|
|
bool waited = false;
|
|
|
|
if (!bs->serialising_in_flight) {
|
|
return false;
|
|
}
|
|
|
|
do {
|
|
retry = false;
|
|
QLIST_FOREACH(req, &bs->tracked_requests, list) {
|
|
if (req == self || (!req->serialising && !self->serialising)) {
|
|
continue;
|
|
}
|
|
if (tracked_request_overlaps(req, self->overlap_offset,
|
|
self->overlap_bytes))
|
|
{
|
|
/* Hitting this means there was a reentrant request, for
|
|
* example, a block driver issuing nested requests. This must
|
|
* never happen since it means deadlock.
|
|
*/
|
|
assert(qemu_coroutine_self() != req->co);
|
|
|
|
/* If the request is already (indirectly) waiting for us, or
|
|
* will wait for us as soon as it wakes up, then just go on
|
|
* (instead of producing a deadlock in the former case). */
|
|
if (!req->waiting_for) {
|
|
self->waiting_for = req;
|
|
qemu_co_queue_wait(&req->wait_queue);
|
|
self->waiting_for = NULL;
|
|
retry = true;
|
|
waited = true;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
} while (retry);
|
|
|
|
return waited;
|
|
}
|
|
|
|
static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
|
|
size_t size)
|
|
{
|
|
if (size > BDRV_REQUEST_MAX_SECTORS << BDRV_SECTOR_BITS) {
|
|
return -EIO;
|
|
}
|
|
|
|
if (!bdrv_is_inserted(bs)) {
|
|
return -ENOMEDIUM;
|
|
}
|
|
|
|
if (offset < 0) {
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
|
|
int nb_sectors)
|
|
{
|
|
if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
|
|
return -EIO;
|
|
}
|
|
|
|
return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
|
|
nb_sectors * BDRV_SECTOR_SIZE);
|
|
}
|
|
|
|
typedef struct RwCo {
|
|
BlockDriverState *bs;
|
|
int64_t offset;
|
|
QEMUIOVector *qiov;
|
|
bool is_write;
|
|
int ret;
|
|
BdrvRequestFlags flags;
|
|
} RwCo;
|
|
|
|
static void coroutine_fn bdrv_rw_co_entry(void *opaque)
|
|
{
|
|
RwCo *rwco = opaque;
|
|
|
|
if (!rwco->is_write) {
|
|
rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
|
|
rwco->qiov->size, rwco->qiov,
|
|
rwco->flags);
|
|
} else {
|
|
rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
|
|
rwco->qiov->size, rwco->qiov,
|
|
rwco->flags);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Process a vectored synchronous request using coroutines
|
|
*/
|
|
static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
|
|
QEMUIOVector *qiov, bool is_write,
|
|
BdrvRequestFlags flags)
|
|
{
|
|
Coroutine *co;
|
|
RwCo rwco = {
|
|
.bs = bs,
|
|
.offset = offset,
|
|
.qiov = qiov,
|
|
.is_write = is_write,
|
|
.ret = NOT_DONE,
|
|
.flags = flags,
|
|
};
|
|
|
|
/**
|
|
* In sync call context, when the vcpu is blocked, this throttling timer
|
|
* will not fire; so the I/O throttling function has to be disabled here
|
|
* if it has been enabled.
|
|
*/
|
|
if (bs->io_limits_enabled) {
|
|
fprintf(stderr, "Disabling I/O throttling on '%s' due "
|
|
"to synchronous I/O.\n", bdrv_get_device_name(bs));
|
|
bdrv_io_limits_disable(bs);
|
|
}
|
|
|
|
if (qemu_in_coroutine()) {
|
|
/* Fast-path if already in coroutine context */
|
|
bdrv_rw_co_entry(&rwco);
|
|
} else {
|
|
AioContext *aio_context = bdrv_get_aio_context(bs);
|
|
|
|
co = qemu_coroutine_create(bdrv_rw_co_entry);
|
|
qemu_coroutine_enter(co, &rwco);
|
|
while (rwco.ret == NOT_DONE) {
|
|
aio_poll(aio_context, true);
|
|
}
|
|
}
|
|
return rwco.ret;
|
|
}
|
|
|
|
/*
|
|
* Process a synchronous request using coroutines
|
|
*/
|
|
static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
|
|
int nb_sectors, bool is_write, BdrvRequestFlags flags)
|
|
{
|
|
QEMUIOVector qiov;
|
|
struct iovec iov = {
|
|
.iov_base = (void *)buf,
|
|
.iov_len = nb_sectors * BDRV_SECTOR_SIZE,
|
|
};
|
|
|
|
if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
qemu_iovec_init_external(&qiov, &iov, 1);
|
|
return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
|
|
&qiov, is_write, flags);
|
|
}
|
|
|
|
/* return < 0 if error. See bdrv_write() for the return codes */
|
|
int bdrv_read(BlockDriverState *bs, int64_t sector_num,
|
|
uint8_t *buf, int nb_sectors)
|
|
{
|
|
return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
|
|
}
|
|
|
|
/* Just like bdrv_read(), but with I/O throttling temporarily disabled */
|
|
int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
|
|
uint8_t *buf, int nb_sectors)
|
|
{
|
|
bool enabled;
|
|
int ret;
|
|
|
|
enabled = bs->io_limits_enabled;
|
|
bs->io_limits_enabled = false;
|
|
ret = bdrv_read(bs, sector_num, buf, nb_sectors);
|
|
bs->io_limits_enabled = enabled;
|
|
return ret;
|
|
}
|
|
|
|
/* Return < 0 if error. Important errors are:
|
|
-EIO generic I/O error (may happen for all errors)
|
|
-ENOMEDIUM No media inserted.
|
|
-EINVAL Invalid sector number or nb_sectors
|
|
-EACCES Trying to write a read-only device
|
|
*/
|
|
int bdrv_write(BlockDriverState *bs, int64_t sector_num,
|
|
const uint8_t *buf, int nb_sectors)
|
|
{
|
|
return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
|
|
}
|
|
|
|
int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
|
|
int nb_sectors, BdrvRequestFlags flags)
|
|
{
|
|
return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
|
|
BDRV_REQ_ZERO_WRITE | flags);
|
|
}
|
|
|
|
/*
|
|
* Completely zero out a block device with the help of bdrv_write_zeroes.
|
|
* The operation is sped up by checking the block status and only writing
|
|
* zeroes to the device if they currently do not return zeroes. Optional
|
|
* flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
|
|
*
|
|
* Returns < 0 on error, 0 on success. For error codes see bdrv_write().
|
|
*/
|
|
int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
|
|
{
|
|
int64_t target_sectors, ret, nb_sectors, sector_num = 0;
|
|
int n;
|
|
|
|
target_sectors = bdrv_nb_sectors(bs);
|
|
if (target_sectors < 0) {
|
|
return target_sectors;
|
|
}
|
|
|
|
for (;;) {
|
|
nb_sectors = MIN(target_sectors - sector_num, BDRV_REQUEST_MAX_SECTORS);
|
|
if (nb_sectors <= 0) {
|
|
return 0;
|
|
}
|
|
ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
|
|
if (ret < 0) {
|
|
error_report("error getting block status at sector %" PRId64 ": %s",
|
|
sector_num, strerror(-ret));
|
|
return ret;
|
|
}
|
|
if (ret & BDRV_BLOCK_ZERO) {
|
|
sector_num += n;
|
|
continue;
|
|
}
|
|
ret = bdrv_write_zeroes(bs, sector_num, n, flags);
|
|
if (ret < 0) {
|
|
error_report("error writing zeroes at sector %" PRId64 ": %s",
|
|
sector_num, strerror(-ret));
|
|
return ret;
|
|
}
|
|
sector_num += n;
|
|
}
|
|
}
|
|
|
|
int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
|
|
{
|
|
QEMUIOVector qiov;
|
|
struct iovec iov = {
|
|
.iov_base = (void *)buf,
|
|
.iov_len = bytes,
|
|
};
|
|
int ret;
|
|
|
|
if (bytes < 0) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
qemu_iovec_init_external(&qiov, &iov, 1);
|
|
ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
return bytes;
|
|
}
|
|
|
|
int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
|
|
{
|
|
int ret;
|
|
|
|
ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
return qiov->size;
|
|
}
|
|
|
|
int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
|
|
const void *buf, int bytes)
|
|
{
|
|
QEMUIOVector qiov;
|
|
struct iovec iov = {
|
|
.iov_base = (void *) buf,
|
|
.iov_len = bytes,
|
|
};
|
|
|
|
if (bytes < 0) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
qemu_iovec_init_external(&qiov, &iov, 1);
|
|
return bdrv_pwritev(bs, offset, &qiov);
|
|
}
|
|
|
|
/*
|
|
* Writes to the file and ensures that no writes are reordered across this
|
|
* request (acts as a barrier)
|
|
*
|
|
* Returns 0 on success, -errno in error cases.
|
|
*/
|
|
int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
|
|
const void *buf, int count)
|
|
{
|
|
int ret;
|
|
|
|
ret = bdrv_pwrite(bs, offset, buf, count);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
/* No flush needed for cache modes that already do it */
|
|
if (bs->enable_write_cache) {
|
|
bdrv_flush(bs);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
|
|
{
|
|
/* Perform I/O through a temporary buffer so that users who scribble over
|
|
* their read buffer while the operation is in progress do not end up
|
|
* modifying the image file. This is critical for zero-copy guest I/O
|
|
* where anything might happen inside guest memory.
|
|
*/
|
|
void *bounce_buffer;
|
|
|
|
BlockDriver *drv = bs->drv;
|
|
struct iovec iov;
|
|
QEMUIOVector bounce_qiov;
|
|
int64_t cluster_sector_num;
|
|
int cluster_nb_sectors;
|
|
size_t skip_bytes;
|
|
int ret;
|
|
|
|
/* Cover entire cluster so no additional backing file I/O is required when
|
|
* allocating cluster in the image file.
|
|
*/
|
|
bdrv_round_to_clusters(bs, sector_num, nb_sectors,
|
|
&cluster_sector_num, &cluster_nb_sectors);
|
|
|
|
trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
|
|
cluster_sector_num, cluster_nb_sectors);
|
|
|
|
iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
|
|
iov.iov_base = bounce_buffer = qemu_try_blockalign(bs, iov.iov_len);
|
|
if (bounce_buffer == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
qemu_iovec_init_external(&bounce_qiov, &iov, 1);
|
|
|
|
ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
|
|
&bounce_qiov);
|
|
if (ret < 0) {
|
|
goto err;
|
|
}
|
|
|
|
if (drv->bdrv_co_write_zeroes &&
|
|
buffer_is_zero(bounce_buffer, iov.iov_len)) {
|
|
ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
|
|
cluster_nb_sectors, 0);
|
|
} else {
|
|
/* This does not change the data on the disk, it is not necessary
|
|
* to flush even in cache=writethrough mode.
|
|
*/
|
|
ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
|
|
&bounce_qiov);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
/* It might be okay to ignore write errors for guest requests. If this
|
|
* is a deliberate copy-on-read then we don't want to ignore the error.
|
|
* Simply report it in all cases.
|
|
*/
|
|
goto err;
|
|
}
|
|
|
|
skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
|
|
qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
|
|
nb_sectors * BDRV_SECTOR_SIZE);
|
|
|
|
err:
|
|
qemu_vfree(bounce_buffer);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Forwards an already correctly aligned request to the BlockDriver. This
|
|
* handles copy on read and zeroing after EOF; any other features must be
|
|
* implemented by the caller.
|
|
*/
|
|
static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
|
|
BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
|
|
int64_t align, QEMUIOVector *qiov, int flags)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
int ret;
|
|
|
|
int64_t sector_num = offset >> BDRV_SECTOR_BITS;
|
|
unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
|
|
|
|
assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
|
|
assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
|
|
assert(!qiov || bytes == qiov->size);
|
|
|
|
/* Handle Copy on Read and associated serialisation */
|
|
if (flags & BDRV_REQ_COPY_ON_READ) {
|
|
/* If we touch the same cluster it counts as an overlap. This
|
|
* guarantees that allocating writes will be serialized and not race
|
|
* with each other for the same cluster. For example, in copy-on-read
|
|
* it ensures that the CoR read and write operations are atomic and
|
|
* guest writes cannot interleave between them. */
|
|
mark_request_serialising(req, bdrv_get_cluster_size(bs));
|
|
}
|
|
|
|
wait_serialising_requests(req);
|
|
|
|
if (flags & BDRV_REQ_COPY_ON_READ) {
|
|
int pnum;
|
|
|
|
ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
if (!ret || pnum != nb_sectors) {
|
|
ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Forward the request to the BlockDriver */
|
|
if (!bs->zero_beyond_eof) {
|
|
ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
|
|
} else {
|
|
/* Read zeros after EOF */
|
|
int64_t total_sectors, max_nb_sectors;
|
|
|
|
total_sectors = bdrv_nb_sectors(bs);
|
|
if (total_sectors < 0) {
|
|
ret = total_sectors;
|
|
goto out;
|
|
}
|
|
|
|
max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
|
|
align >> BDRV_SECTOR_BITS);
|
|
if (nb_sectors < max_nb_sectors) {
|
|
ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
|
|
} else if (max_nb_sectors > 0) {
|
|
QEMUIOVector local_qiov;
|
|
|
|
qemu_iovec_init(&local_qiov, qiov->niov);
|
|
qemu_iovec_concat(&local_qiov, qiov, 0,
|
|
max_nb_sectors * BDRV_SECTOR_SIZE);
|
|
|
|
ret = drv->bdrv_co_readv(bs, sector_num, max_nb_sectors,
|
|
&local_qiov);
|
|
|
|
qemu_iovec_destroy(&local_qiov);
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
|
|
/* Reading beyond end of file is supposed to produce zeroes */
|
|
if (ret == 0 && total_sectors < sector_num + nb_sectors) {
|
|
uint64_t offset = MAX(0, total_sectors - sector_num);
|
|
uint64_t bytes = (sector_num + nb_sectors - offset) *
|
|
BDRV_SECTOR_SIZE;
|
|
qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
|
|
}
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Handle a read request in coroutine context
|
|
*/
|
|
static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
|
|
int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
|
|
BdrvRequestFlags flags)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
BdrvTrackedRequest req;
|
|
|
|
/* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
|
|
uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
|
|
uint8_t *head_buf = NULL;
|
|
uint8_t *tail_buf = NULL;
|
|
QEMUIOVector local_qiov;
|
|
bool use_local_qiov = false;
|
|
int ret;
|
|
|
|
if (!drv) {
|
|
return -ENOMEDIUM;
|
|
}
|
|
|
|
ret = bdrv_check_byte_request(bs, offset, bytes);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
if (bs->copy_on_read) {
|
|
flags |= BDRV_REQ_COPY_ON_READ;
|
|
}
|
|
|
|
/* throttling disk I/O */
|
|
if (bs->io_limits_enabled) {
|
|
throttle_group_co_io_limits_intercept(bs, bytes, false);
|
|
}
|
|
|
|
/* Align read if necessary by padding qiov */
|
|
if (offset & (align - 1)) {
|
|
head_buf = qemu_blockalign(bs, align);
|
|
qemu_iovec_init(&local_qiov, qiov->niov + 2);
|
|
qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
|
|
qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
|
|
use_local_qiov = true;
|
|
|
|
bytes += offset & (align - 1);
|
|
offset = offset & ~(align - 1);
|
|
}
|
|
|
|
if ((offset + bytes) & (align - 1)) {
|
|
if (!use_local_qiov) {
|
|
qemu_iovec_init(&local_qiov, qiov->niov + 1);
|
|
qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
|
|
use_local_qiov = true;
|
|
}
|
|
tail_buf = qemu_blockalign(bs, align);
|
|
qemu_iovec_add(&local_qiov, tail_buf,
|
|
align - ((offset + bytes) & (align - 1)));
|
|
|
|
bytes = ROUND_UP(bytes, align);
|
|
}
|
|
|
|
tracked_request_begin(&req, bs, offset, bytes, false);
|
|
ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
|
|
use_local_qiov ? &local_qiov : qiov,
|
|
flags);
|
|
tracked_request_end(&req);
|
|
|
|
if (use_local_qiov) {
|
|
qemu_iovec_destroy(&local_qiov);
|
|
qemu_vfree(head_buf);
|
|
qemu_vfree(tail_buf);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
|
|
BdrvRequestFlags flags)
|
|
{
|
|
if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
|
|
nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
|
|
}
|
|
|
|
int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
|
|
int nb_sectors, QEMUIOVector *qiov)
|
|
{
|
|
trace_bdrv_co_readv(bs, sector_num, nb_sectors);
|
|
|
|
return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
|
|
}
|
|
|
|
int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
|
|
{
|
|
trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
|
|
|
|
return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
|
|
BDRV_REQ_COPY_ON_READ);
|
|
}
|
|
|
|
#define MAX_WRITE_ZEROES_BOUNCE_BUFFER 32768
|
|
|
|
static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
QEMUIOVector qiov;
|
|
struct iovec iov = {0};
|
|
int ret = 0;
|
|
|
|
int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_write_zeroes,
|
|
BDRV_REQUEST_MAX_SECTORS);
|
|
|
|
while (nb_sectors > 0 && !ret) {
|
|
int num = nb_sectors;
|
|
|
|
/* Align request. Block drivers can expect the "bulk" of the request
|
|
* to be aligned.
|
|
*/
|
|
if (bs->bl.write_zeroes_alignment
|
|
&& num > bs->bl.write_zeroes_alignment) {
|
|
if (sector_num % bs->bl.write_zeroes_alignment != 0) {
|
|
/* Make a small request up to the first aligned sector. */
|
|
num = bs->bl.write_zeroes_alignment;
|
|
num -= sector_num % bs->bl.write_zeroes_alignment;
|
|
} else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
|
|
/* Shorten the request to the last aligned sector. num cannot
|
|
* underflow because num > bs->bl.write_zeroes_alignment.
|
|
*/
|
|
num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
|
|
}
|
|
}
|
|
|
|
/* limit request size */
|
|
if (num > max_write_zeroes) {
|
|
num = max_write_zeroes;
|
|
}
|
|
|
|
ret = -ENOTSUP;
|
|
/* First try the efficient write zeroes operation */
|
|
if (drv->bdrv_co_write_zeroes) {
|
|
ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
|
|
}
|
|
|
|
if (ret == -ENOTSUP) {
|
|
/* Fall back to bounce buffer if write zeroes is unsupported */
|
|
int max_xfer_len = MIN_NON_ZERO(bs->bl.max_transfer_length,
|
|
MAX_WRITE_ZEROES_BOUNCE_BUFFER);
|
|
num = MIN(num, max_xfer_len);
|
|
iov.iov_len = num * BDRV_SECTOR_SIZE;
|
|
if (iov.iov_base == NULL) {
|
|
iov.iov_base = qemu_try_blockalign(bs, num * BDRV_SECTOR_SIZE);
|
|
if (iov.iov_base == NULL) {
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
|
|
}
|
|
qemu_iovec_init_external(&qiov, &iov, 1);
|
|
|
|
ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
|
|
|
|
/* Keep bounce buffer around if it is big enough for all
|
|
* all future requests.
|
|
*/
|
|
if (num < max_xfer_len) {
|
|
qemu_vfree(iov.iov_base);
|
|
iov.iov_base = NULL;
|
|
}
|
|
}
|
|
|
|
sector_num += num;
|
|
nb_sectors -= num;
|
|
}
|
|
|
|
fail:
|
|
qemu_vfree(iov.iov_base);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Forwards an already correctly aligned write request to the BlockDriver.
|
|
*/
|
|
static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
|
|
BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
|
|
QEMUIOVector *qiov, int flags)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
bool waited;
|
|
int ret;
|
|
|
|
int64_t sector_num = offset >> BDRV_SECTOR_BITS;
|
|
unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
|
|
|
|
assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
|
|
assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
|
|
assert(!qiov || bytes == qiov->size);
|
|
|
|
waited = wait_serialising_requests(req);
|
|
assert(!waited || !req->serialising);
|
|
assert(req->overlap_offset <= offset);
|
|
assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
|
|
|
|
ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
|
|
|
|
if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
|
|
!(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
|
|
qemu_iovec_is_zero(qiov)) {
|
|
flags |= BDRV_REQ_ZERO_WRITE;
|
|
if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
|
|
flags |= BDRV_REQ_MAY_UNMAP;
|
|
}
|
|
}
|
|
|
|
if (ret < 0) {
|
|
/* Do nothing, write notifier decided to fail this request */
|
|
} else if (flags & BDRV_REQ_ZERO_WRITE) {
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
|
|
ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
|
|
} else {
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
|
|
ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
|
|
}
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
|
|
|
|
if (ret == 0 && !bs->enable_write_cache) {
|
|
ret = bdrv_co_flush(bs);
|
|
}
|
|
|
|
bdrv_set_dirty(bs, sector_num, nb_sectors);
|
|
|
|
block_acct_highest_sector(&bs->stats, sector_num, nb_sectors);
|
|
|
|
if (ret >= 0) {
|
|
bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int coroutine_fn bdrv_co_do_zero_pwritev(BlockDriverState *bs,
|
|
int64_t offset,
|
|
unsigned int bytes,
|
|
BdrvRequestFlags flags,
|
|
BdrvTrackedRequest *req)
|
|
{
|
|
uint8_t *buf = NULL;
|
|
QEMUIOVector local_qiov;
|
|
struct iovec iov;
|
|
uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
|
|
unsigned int head_padding_bytes, tail_padding_bytes;
|
|
int ret = 0;
|
|
|
|
head_padding_bytes = offset & (align - 1);
|
|
tail_padding_bytes = align - ((offset + bytes) & (align - 1));
|
|
|
|
|
|
assert(flags & BDRV_REQ_ZERO_WRITE);
|
|
if (head_padding_bytes || tail_padding_bytes) {
|
|
buf = qemu_blockalign(bs, align);
|
|
iov = (struct iovec) {
|
|
.iov_base = buf,
|
|
.iov_len = align,
|
|
};
|
|
qemu_iovec_init_external(&local_qiov, &iov, 1);
|
|
}
|
|
if (head_padding_bytes) {
|
|
uint64_t zero_bytes = MIN(bytes, align - head_padding_bytes);
|
|
|
|
/* RMW the unaligned part before head. */
|
|
mark_request_serialising(req, align);
|
|
wait_serialising_requests(req);
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
|
|
ret = bdrv_aligned_preadv(bs, req, offset & ~(align - 1), align,
|
|
align, &local_qiov, 0);
|
|
if (ret < 0) {
|
|
goto fail;
|
|
}
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
|
|
|
|
memset(buf + head_padding_bytes, 0, zero_bytes);
|
|
ret = bdrv_aligned_pwritev(bs, req, offset & ~(align - 1), align,
|
|
&local_qiov,
|
|
flags & ~BDRV_REQ_ZERO_WRITE);
|
|
if (ret < 0) {
|
|
goto fail;
|
|
}
|
|
offset += zero_bytes;
|
|
bytes -= zero_bytes;
|
|
}
|
|
|
|
assert(!bytes || (offset & (align - 1)) == 0);
|
|
if (bytes >= align) {
|
|
/* Write the aligned part in the middle. */
|
|
uint64_t aligned_bytes = bytes & ~(align - 1);
|
|
ret = bdrv_aligned_pwritev(bs, req, offset, aligned_bytes,
|
|
NULL, flags);
|
|
if (ret < 0) {
|
|
goto fail;
|
|
}
|
|
bytes -= aligned_bytes;
|
|
offset += aligned_bytes;
|
|
}
|
|
|
|
assert(!bytes || (offset & (align - 1)) == 0);
|
|
if (bytes) {
|
|
assert(align == tail_padding_bytes + bytes);
|
|
/* RMW the unaligned part after tail. */
|
|
mark_request_serialising(req, align);
|
|
wait_serialising_requests(req);
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
|
|
ret = bdrv_aligned_preadv(bs, req, offset, align,
|
|
align, &local_qiov, 0);
|
|
if (ret < 0) {
|
|
goto fail;
|
|
}
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
|
|
|
|
memset(buf, 0, bytes);
|
|
ret = bdrv_aligned_pwritev(bs, req, offset, align,
|
|
&local_qiov, flags & ~BDRV_REQ_ZERO_WRITE);
|
|
}
|
|
fail:
|
|
qemu_vfree(buf);
|
|
return ret;
|
|
|
|
}
|
|
|
|
/*
|
|
* Handle a write request in coroutine context
|
|
*/
|
|
static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
|
|
int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
|
|
BdrvRequestFlags flags)
|
|
{
|
|
BdrvTrackedRequest req;
|
|
/* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
|
|
uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
|
|
uint8_t *head_buf = NULL;
|
|
uint8_t *tail_buf = NULL;
|
|
QEMUIOVector local_qiov;
|
|
bool use_local_qiov = false;
|
|
int ret;
|
|
|
|
if (!bs->drv) {
|
|
return -ENOMEDIUM;
|
|
}
|
|
if (bs->read_only) {
|
|
return -EPERM;
|
|
}
|
|
|
|
ret = bdrv_check_byte_request(bs, offset, bytes);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
/* throttling disk I/O */
|
|
if (bs->io_limits_enabled) {
|
|
throttle_group_co_io_limits_intercept(bs, bytes, true);
|
|
}
|
|
|
|
/*
|
|
* Align write if necessary by performing a read-modify-write cycle.
|
|
* Pad qiov with the read parts and be sure to have a tracked request not
|
|
* only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
|
|
*/
|
|
tracked_request_begin(&req, bs, offset, bytes, true);
|
|
|
|
if (!qiov) {
|
|
ret = bdrv_co_do_zero_pwritev(bs, offset, bytes, flags, &req);
|
|
goto out;
|
|
}
|
|
|
|
if (offset & (align - 1)) {
|
|
QEMUIOVector head_qiov;
|
|
struct iovec head_iov;
|
|
|
|
mark_request_serialising(&req, align);
|
|
wait_serialising_requests(&req);
|
|
|
|
head_buf = qemu_blockalign(bs, align);
|
|
head_iov = (struct iovec) {
|
|
.iov_base = head_buf,
|
|
.iov_len = align,
|
|
};
|
|
qemu_iovec_init_external(&head_qiov, &head_iov, 1);
|
|
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
|
|
ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
|
|
align, &head_qiov, 0);
|
|
if (ret < 0) {
|
|
goto fail;
|
|
}
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
|
|
|
|
qemu_iovec_init(&local_qiov, qiov->niov + 2);
|
|
qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
|
|
qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
|
|
use_local_qiov = true;
|
|
|
|
bytes += offset & (align - 1);
|
|
offset = offset & ~(align - 1);
|
|
}
|
|
|
|
if ((offset + bytes) & (align - 1)) {
|
|
QEMUIOVector tail_qiov;
|
|
struct iovec tail_iov;
|
|
size_t tail_bytes;
|
|
bool waited;
|
|
|
|
mark_request_serialising(&req, align);
|
|
waited = wait_serialising_requests(&req);
|
|
assert(!waited || !use_local_qiov);
|
|
|
|
tail_buf = qemu_blockalign(bs, align);
|
|
tail_iov = (struct iovec) {
|
|
.iov_base = tail_buf,
|
|
.iov_len = align,
|
|
};
|
|
qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
|
|
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
|
|
ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
|
|
align, &tail_qiov, 0);
|
|
if (ret < 0) {
|
|
goto fail;
|
|
}
|
|
BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
|
|
|
|
if (!use_local_qiov) {
|
|
qemu_iovec_init(&local_qiov, qiov->niov + 1);
|
|
qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
|
|
use_local_qiov = true;
|
|
}
|
|
|
|
tail_bytes = (offset + bytes) & (align - 1);
|
|
qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
|
|
|
|
bytes = ROUND_UP(bytes, align);
|
|
}
|
|
|
|
ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
|
|
use_local_qiov ? &local_qiov : qiov,
|
|
flags);
|
|
|
|
fail:
|
|
|
|
if (use_local_qiov) {
|
|
qemu_iovec_destroy(&local_qiov);
|
|
}
|
|
qemu_vfree(head_buf);
|
|
qemu_vfree(tail_buf);
|
|
out:
|
|
tracked_request_end(&req);
|
|
return ret;
|
|
}
|
|
|
|
static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
|
|
BdrvRequestFlags flags)
|
|
{
|
|
if (nb_sectors < 0 || nb_sectors > BDRV_REQUEST_MAX_SECTORS) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
|
|
nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
|
|
}
|
|
|
|
int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
|
|
int nb_sectors, QEMUIOVector *qiov)
|
|
{
|
|
trace_bdrv_co_writev(bs, sector_num, nb_sectors);
|
|
|
|
return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
|
|
}
|
|
|
|
int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors,
|
|
BdrvRequestFlags flags)
|
|
{
|
|
trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
|
|
|
|
if (!(bs->open_flags & BDRV_O_UNMAP)) {
|
|
flags &= ~BDRV_REQ_MAY_UNMAP;
|
|
}
|
|
|
|
return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
|
|
BDRV_REQ_ZERO_WRITE | flags);
|
|
}
|
|
|
|
int bdrv_flush_all(void)
|
|
{
|
|
BlockDriverState *bs = NULL;
|
|
int result = 0;
|
|
|
|
while ((bs = bdrv_next(bs))) {
|
|
AioContext *aio_context = bdrv_get_aio_context(bs);
|
|
int ret;
|
|
|
|
aio_context_acquire(aio_context);
|
|
ret = bdrv_flush(bs);
|
|
if (ret < 0 && !result) {
|
|
result = ret;
|
|
}
|
|
aio_context_release(aio_context);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
typedef struct BdrvCoGetBlockStatusData {
|
|
BlockDriverState *bs;
|
|
BlockDriverState *base;
|
|
int64_t sector_num;
|
|
int nb_sectors;
|
|
int *pnum;
|
|
int64_t ret;
|
|
bool done;
|
|
} BdrvCoGetBlockStatusData;
|
|
|
|
/*
|
|
* Returns the allocation status of the specified sectors.
|
|
* Drivers not implementing the functionality are assumed to not support
|
|
* backing files, hence all their sectors are reported as allocated.
|
|
*
|
|
* If 'sector_num' is beyond the end of the disk image the return value is 0
|
|
* and 'pnum' is set to 0.
|
|
*
|
|
* 'pnum' is set to the number of sectors (including and immediately following
|
|
* the specified sector) that are known to be in the same
|
|
* allocated/unallocated state.
|
|
*
|
|
* 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
|
|
* beyond the end of the disk image it will be clamped.
|
|
*/
|
|
static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
|
|
int64_t sector_num,
|
|
int nb_sectors, int *pnum)
|
|
{
|
|
int64_t total_sectors;
|
|
int64_t n;
|
|
int64_t ret, ret2;
|
|
|
|
total_sectors = bdrv_nb_sectors(bs);
|
|
if (total_sectors < 0) {
|
|
return total_sectors;
|
|
}
|
|
|
|
if (sector_num >= total_sectors) {
|
|
*pnum = 0;
|
|
return 0;
|
|
}
|
|
|
|
n = total_sectors - sector_num;
|
|
if (n < nb_sectors) {
|
|
nb_sectors = n;
|
|
}
|
|
|
|
if (!bs->drv->bdrv_co_get_block_status) {
|
|
*pnum = nb_sectors;
|
|
ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
|
|
if (bs->drv->protocol_name) {
|
|
ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
|
|
if (ret < 0) {
|
|
*pnum = 0;
|
|
return ret;
|
|
}
|
|
|
|
if (ret & BDRV_BLOCK_RAW) {
|
|
assert(ret & BDRV_BLOCK_OFFSET_VALID);
|
|
return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
|
|
*pnum, pnum);
|
|
}
|
|
|
|
if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) {
|
|
ret |= BDRV_BLOCK_ALLOCATED;
|
|
} else {
|
|
if (bdrv_unallocated_blocks_are_zero(bs)) {
|
|
ret |= BDRV_BLOCK_ZERO;
|
|
} else if (bs->backing_hd) {
|
|
BlockDriverState *bs2 = bs->backing_hd;
|
|
int64_t nb_sectors2 = bdrv_nb_sectors(bs2);
|
|
if (nb_sectors2 >= 0 && sector_num >= nb_sectors2) {
|
|
ret |= BDRV_BLOCK_ZERO;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (bs->file &&
|
|
(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
|
|
(ret & BDRV_BLOCK_OFFSET_VALID)) {
|
|
int file_pnum;
|
|
|
|
ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
|
|
*pnum, &file_pnum);
|
|
if (ret2 >= 0) {
|
|
/* Ignore errors. This is just providing extra information, it
|
|
* is useful but not necessary.
|
|
*/
|
|
if (!file_pnum) {
|
|
/* !file_pnum indicates an offset at or beyond the EOF; it is
|
|
* perfectly valid for the format block driver to point to such
|
|
* offsets, so catch it and mark everything as zero */
|
|
ret |= BDRV_BLOCK_ZERO;
|
|
} else {
|
|
/* Limit request to the range reported by the protocol driver */
|
|
*pnum = file_pnum;
|
|
ret |= (ret2 & BDRV_BLOCK_ZERO);
|
|
}
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Coroutine wrapper for bdrv_get_block_status() */
|
|
static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
|
|
{
|
|
BdrvCoGetBlockStatusData *data = opaque;
|
|
BlockDriverState *bs = data->bs;
|
|
|
|
data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
|
|
data->pnum);
|
|
data->done = true;
|
|
}
|
|
|
|
/*
|
|
* Synchronous wrapper around bdrv_co_get_block_status().
|
|
*
|
|
* See bdrv_co_get_block_status() for details.
|
|
*/
|
|
int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
|
|
int nb_sectors, int *pnum)
|
|
{
|
|
Coroutine *co;
|
|
BdrvCoGetBlockStatusData data = {
|
|
.bs = bs,
|
|
.sector_num = sector_num,
|
|
.nb_sectors = nb_sectors,
|
|
.pnum = pnum,
|
|
.done = false,
|
|
};
|
|
|
|
if (qemu_in_coroutine()) {
|
|
/* Fast-path if already in coroutine context */
|
|
bdrv_get_block_status_co_entry(&data);
|
|
} else {
|
|
AioContext *aio_context = bdrv_get_aio_context(bs);
|
|
|
|
co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
|
|
qemu_coroutine_enter(co, &data);
|
|
while (!data.done) {
|
|
aio_poll(aio_context, true);
|
|
}
|
|
}
|
|
return data.ret;
|
|
}
|
|
|
|
int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
|
|
int nb_sectors, int *pnum)
|
|
{
|
|
int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
return !!(ret & BDRV_BLOCK_ALLOCATED);
|
|
}
|
|
|
|
/*
|
|
* Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
|
|
*
|
|
* Return true if the given sector is allocated in any image between
|
|
* BASE and TOP (inclusive). BASE can be NULL to check if the given
|
|
* sector is allocated in any image of the chain. Return false otherwise.
|
|
*
|
|
* 'pnum' is set to the number of sectors (including and immediately following
|
|
* the specified sector) that are known to be in the same
|
|
* allocated/unallocated state.
|
|
*
|
|
*/
|
|
int bdrv_is_allocated_above(BlockDriverState *top,
|
|
BlockDriverState *base,
|
|
int64_t sector_num,
|
|
int nb_sectors, int *pnum)
|
|
{
|
|
BlockDriverState *intermediate;
|
|
int ret, n = nb_sectors;
|
|
|
|
intermediate = top;
|
|
while (intermediate && intermediate != base) {
|
|
int pnum_inter;
|
|
ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
|
|
&pnum_inter);
|
|
if (ret < 0) {
|
|
return ret;
|
|
} else if (ret) {
|
|
*pnum = pnum_inter;
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* [sector_num, nb_sectors] is unallocated on top but intermediate
|
|
* might have
|
|
*
|
|
* [sector_num+x, nr_sectors] allocated.
|
|
*/
|
|
if (n > pnum_inter &&
|
|
(intermediate == top ||
|
|
sector_num + pnum_inter < intermediate->total_sectors)) {
|
|
n = pnum_inter;
|
|
}
|
|
|
|
intermediate = intermediate->backing_hd;
|
|
}
|
|
|
|
*pnum = n;
|
|
return 0;
|
|
}
|
|
|
|
int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
|
|
const uint8_t *buf, int nb_sectors)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
int ret;
|
|
|
|
if (!drv) {
|
|
return -ENOMEDIUM;
|
|
}
|
|
if (!drv->bdrv_write_compressed) {
|
|
return -ENOTSUP;
|
|
}
|
|
ret = bdrv_check_request(bs, sector_num, nb_sectors);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
assert(QLIST_EMPTY(&bs->dirty_bitmaps));
|
|
|
|
return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
|
|
}
|
|
|
|
int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
|
|
int64_t pos, int size)
|
|
{
|
|
QEMUIOVector qiov;
|
|
struct iovec iov = {
|
|
.iov_base = (void *) buf,
|
|
.iov_len = size,
|
|
};
|
|
|
|
qemu_iovec_init_external(&qiov, &iov, 1);
|
|
return bdrv_writev_vmstate(bs, &qiov, pos);
|
|
}
|
|
|
|
int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
|
|
if (!drv) {
|
|
return -ENOMEDIUM;
|
|
} else if (drv->bdrv_save_vmstate) {
|
|
return drv->bdrv_save_vmstate(bs, qiov, pos);
|
|
} else if (bs->file) {
|
|
return bdrv_writev_vmstate(bs->file, qiov, pos);
|
|
}
|
|
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
|
|
int64_t pos, int size)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
if (!drv)
|
|
return -ENOMEDIUM;
|
|
if (drv->bdrv_load_vmstate)
|
|
return drv->bdrv_load_vmstate(bs, buf, pos, size);
|
|
if (bs->file)
|
|
return bdrv_load_vmstate(bs->file, buf, pos, size);
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
/**************************************************************/
|
|
/* async I/Os */
|
|
|
|
BlockAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
|
|
QEMUIOVector *qiov, int nb_sectors,
|
|
BlockCompletionFunc *cb, void *opaque)
|
|
{
|
|
trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
|
|
|
|
return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
|
|
cb, opaque, false);
|
|
}
|
|
|
|
BlockAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
|
|
QEMUIOVector *qiov, int nb_sectors,
|
|
BlockCompletionFunc *cb, void *opaque)
|
|
{
|
|
trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
|
|
|
|
return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
|
|
cb, opaque, true);
|
|
}
|
|
|
|
BlockAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
|
|
BlockCompletionFunc *cb, void *opaque)
|
|
{
|
|
trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
|
|
|
|
return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
|
|
BDRV_REQ_ZERO_WRITE | flags,
|
|
cb, opaque, true);
|
|
}
|
|
|
|
|
|
typedef struct MultiwriteCB {
|
|
int error;
|
|
int num_requests;
|
|
int num_callbacks;
|
|
struct {
|
|
BlockCompletionFunc *cb;
|
|
void *opaque;
|
|
QEMUIOVector *free_qiov;
|
|
} callbacks[];
|
|
} MultiwriteCB;
|
|
|
|
static void multiwrite_user_cb(MultiwriteCB *mcb)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < mcb->num_callbacks; i++) {
|
|
mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
|
|
if (mcb->callbacks[i].free_qiov) {
|
|
qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
|
|
}
|
|
g_free(mcb->callbacks[i].free_qiov);
|
|
}
|
|
}
|
|
|
|
static void multiwrite_cb(void *opaque, int ret)
|
|
{
|
|
MultiwriteCB *mcb = opaque;
|
|
|
|
trace_multiwrite_cb(mcb, ret);
|
|
|
|
if (ret < 0 && !mcb->error) {
|
|
mcb->error = ret;
|
|
}
|
|
|
|
mcb->num_requests--;
|
|
if (mcb->num_requests == 0) {
|
|
multiwrite_user_cb(mcb);
|
|
g_free(mcb);
|
|
}
|
|
}
|
|
|
|
static int multiwrite_req_compare(const void *a, const void *b)
|
|
{
|
|
const BlockRequest *req1 = a, *req2 = b;
|
|
|
|
/*
|
|
* Note that we can't simply subtract req2->sector from req1->sector
|
|
* here as that could overflow the return value.
|
|
*/
|
|
if (req1->sector > req2->sector) {
|
|
return 1;
|
|
} else if (req1->sector < req2->sector) {
|
|
return -1;
|
|
} else {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Takes a bunch of requests and tries to merge them. Returns the number of
|
|
* requests that remain after merging.
|
|
*/
|
|
static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
|
|
int num_reqs, MultiwriteCB *mcb)
|
|
{
|
|
int i, outidx;
|
|
|
|
// Sort requests by start sector
|
|
qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
|
|
|
|
// Check if adjacent requests touch the same clusters. If so, combine them,
|
|
// filling up gaps with zero sectors.
|
|
outidx = 0;
|
|
for (i = 1; i < num_reqs; i++) {
|
|
int merge = 0;
|
|
int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
|
|
|
|
// Handle exactly sequential writes and overlapping writes.
|
|
if (reqs[i].sector <= oldreq_last) {
|
|
merge = 1;
|
|
}
|
|
|
|
if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
|
|
merge = 0;
|
|
}
|
|
|
|
if (bs->bl.max_transfer_length && reqs[outidx].nb_sectors +
|
|
reqs[i].nb_sectors > bs->bl.max_transfer_length) {
|
|
merge = 0;
|
|
}
|
|
|
|
if (merge) {
|
|
size_t size;
|
|
QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
|
|
qemu_iovec_init(qiov,
|
|
reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
|
|
|
|
// Add the first request to the merged one. If the requests are
|
|
// overlapping, drop the last sectors of the first request.
|
|
size = (reqs[i].sector - reqs[outidx].sector) << 9;
|
|
qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
|
|
|
|
// We should need to add any zeros between the two requests
|
|
assert (reqs[i].sector <= oldreq_last);
|
|
|
|
// Add the second request
|
|
qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
|
|
|
|
// Add tail of first request, if necessary
|
|
if (qiov->size < reqs[outidx].qiov->size) {
|
|
qemu_iovec_concat(qiov, reqs[outidx].qiov, qiov->size,
|
|
reqs[outidx].qiov->size - qiov->size);
|
|
}
|
|
|
|
reqs[outidx].nb_sectors = qiov->size >> 9;
|
|
reqs[outidx].qiov = qiov;
|
|
|
|
mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
|
|
} else {
|
|
outidx++;
|
|
reqs[outidx].sector = reqs[i].sector;
|
|
reqs[outidx].nb_sectors = reqs[i].nb_sectors;
|
|
reqs[outidx].qiov = reqs[i].qiov;
|
|
}
|
|
}
|
|
|
|
block_acct_merge_done(&bs->stats, BLOCK_ACCT_WRITE, num_reqs - outidx - 1);
|
|
|
|
return outidx + 1;
|
|
}
|
|
|
|
/*
|
|
* Submit multiple AIO write requests at once.
|
|
*
|
|
* On success, the function returns 0 and all requests in the reqs array have
|
|
* been submitted. In error case this function returns -1, and any of the
|
|
* requests may or may not be submitted yet. In particular, this means that the
|
|
* callback will be called for some of the requests, for others it won't. The
|
|
* caller must check the error field of the BlockRequest to wait for the right
|
|
* callbacks (if error != 0, no callback will be called).
|
|
*
|
|
* The implementation may modify the contents of the reqs array, e.g. to merge
|
|
* requests. However, the fields opaque and error are left unmodified as they
|
|
* are used to signal failure for a single request to the caller.
|
|
*/
|
|
int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
|
|
{
|
|
MultiwriteCB *mcb;
|
|
int i;
|
|
|
|
/* don't submit writes if we don't have a medium */
|
|
if (bs->drv == NULL) {
|
|
for (i = 0; i < num_reqs; i++) {
|
|
reqs[i].error = -ENOMEDIUM;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
if (num_reqs == 0) {
|
|
return 0;
|
|
}
|
|
|
|
// Create MultiwriteCB structure
|
|
mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
|
|
mcb->num_requests = 0;
|
|
mcb->num_callbacks = num_reqs;
|
|
|
|
for (i = 0; i < num_reqs; i++) {
|
|
mcb->callbacks[i].cb = reqs[i].cb;
|
|
mcb->callbacks[i].opaque = reqs[i].opaque;
|
|
}
|
|
|
|
// Check for mergable requests
|
|
num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
|
|
|
|
trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
|
|
|
|
/* Run the aio requests. */
|
|
mcb->num_requests = num_reqs;
|
|
for (i = 0; i < num_reqs; i++) {
|
|
bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
|
|
reqs[i].nb_sectors, reqs[i].flags,
|
|
multiwrite_cb, mcb,
|
|
true);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void bdrv_aio_cancel(BlockAIOCB *acb)
|
|
{
|
|
qemu_aio_ref(acb);
|
|
bdrv_aio_cancel_async(acb);
|
|
while (acb->refcnt > 1) {
|
|
if (acb->aiocb_info->get_aio_context) {
|
|
aio_poll(acb->aiocb_info->get_aio_context(acb), true);
|
|
} else if (acb->bs) {
|
|
aio_poll(bdrv_get_aio_context(acb->bs), true);
|
|
} else {
|
|
abort();
|
|
}
|
|
}
|
|
qemu_aio_unref(acb);
|
|
}
|
|
|
|
/* Async version of aio cancel. The caller is not blocked if the acb implements
|
|
* cancel_async, otherwise we do nothing and let the request normally complete.
|
|
* In either case the completion callback must be called. */
|
|
void bdrv_aio_cancel_async(BlockAIOCB *acb)
|
|
{
|
|
if (acb->aiocb_info->cancel_async) {
|
|
acb->aiocb_info->cancel_async(acb);
|
|
}
|
|
}
|
|
|
|
/**************************************************************/
|
|
/* async block device emulation */
|
|
|
|
typedef struct BlockAIOCBSync {
|
|
BlockAIOCB common;
|
|
QEMUBH *bh;
|
|
int ret;
|
|
/* vector translation state */
|
|
QEMUIOVector *qiov;
|
|
uint8_t *bounce;
|
|
int is_write;
|
|
} BlockAIOCBSync;
|
|
|
|
static const AIOCBInfo bdrv_em_aiocb_info = {
|
|
.aiocb_size = sizeof(BlockAIOCBSync),
|
|
};
|
|
|
|
static void bdrv_aio_bh_cb(void *opaque)
|
|
{
|
|
BlockAIOCBSync *acb = opaque;
|
|
|
|
if (!acb->is_write && acb->ret >= 0) {
|
|
qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
|
|
}
|
|
qemu_vfree(acb->bounce);
|
|
acb->common.cb(acb->common.opaque, acb->ret);
|
|
qemu_bh_delete(acb->bh);
|
|
acb->bh = NULL;
|
|
qemu_aio_unref(acb);
|
|
}
|
|
|
|
static BlockAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
|
|
int64_t sector_num,
|
|
QEMUIOVector *qiov,
|
|
int nb_sectors,
|
|
BlockCompletionFunc *cb,
|
|
void *opaque,
|
|
int is_write)
|
|
|
|
{
|
|
BlockAIOCBSync *acb;
|
|
|
|
acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
|
|
acb->is_write = is_write;
|
|
acb->qiov = qiov;
|
|
acb->bounce = qemu_try_blockalign(bs, qiov->size);
|
|
acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb);
|
|
|
|
if (acb->bounce == NULL) {
|
|
acb->ret = -ENOMEM;
|
|
} else if (is_write) {
|
|
qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
|
|
acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
|
|
} else {
|
|
acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
|
|
}
|
|
|
|
qemu_bh_schedule(acb->bh);
|
|
|
|
return &acb->common;
|
|
}
|
|
|
|
static BlockAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
|
|
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
|
|
BlockCompletionFunc *cb, void *opaque)
|
|
{
|
|
return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
|
|
}
|
|
|
|
static BlockAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
|
|
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
|
|
BlockCompletionFunc *cb, void *opaque)
|
|
{
|
|
return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
|
|
}
|
|
|
|
|
|
typedef struct BlockAIOCBCoroutine {
|
|
BlockAIOCB common;
|
|
BlockRequest req;
|
|
bool is_write;
|
|
bool need_bh;
|
|
bool *done;
|
|
QEMUBH* bh;
|
|
} BlockAIOCBCoroutine;
|
|
|
|
static const AIOCBInfo bdrv_em_co_aiocb_info = {
|
|
.aiocb_size = sizeof(BlockAIOCBCoroutine),
|
|
};
|
|
|
|
static void bdrv_co_complete(BlockAIOCBCoroutine *acb)
|
|
{
|
|
if (!acb->need_bh) {
|
|
acb->common.cb(acb->common.opaque, acb->req.error);
|
|
qemu_aio_unref(acb);
|
|
}
|
|
}
|
|
|
|
static void bdrv_co_em_bh(void *opaque)
|
|
{
|
|
BlockAIOCBCoroutine *acb = opaque;
|
|
|
|
assert(!acb->need_bh);
|
|
qemu_bh_delete(acb->bh);
|
|
bdrv_co_complete(acb);
|
|
}
|
|
|
|
static void bdrv_co_maybe_schedule_bh(BlockAIOCBCoroutine *acb)
|
|
{
|
|
acb->need_bh = false;
|
|
if (acb->req.error != -EINPROGRESS) {
|
|
BlockDriverState *bs = acb->common.bs;
|
|
|
|
acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
|
|
qemu_bh_schedule(acb->bh);
|
|
}
|
|
}
|
|
|
|
/* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
|
|
static void coroutine_fn bdrv_co_do_rw(void *opaque)
|
|
{
|
|
BlockAIOCBCoroutine *acb = opaque;
|
|
BlockDriverState *bs = acb->common.bs;
|
|
|
|
if (!acb->is_write) {
|
|
acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
|
|
acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
|
|
} else {
|
|
acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
|
|
acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
|
|
}
|
|
|
|
bdrv_co_complete(acb);
|
|
}
|
|
|
|
static BlockAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
|
|
int64_t sector_num,
|
|
QEMUIOVector *qiov,
|
|
int nb_sectors,
|
|
BdrvRequestFlags flags,
|
|
BlockCompletionFunc *cb,
|
|
void *opaque,
|
|
bool is_write)
|
|
{
|
|
Coroutine *co;
|
|
BlockAIOCBCoroutine *acb;
|
|
|
|
acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
|
|
acb->need_bh = true;
|
|
acb->req.error = -EINPROGRESS;
|
|
acb->req.sector = sector_num;
|
|
acb->req.nb_sectors = nb_sectors;
|
|
acb->req.qiov = qiov;
|
|
acb->req.flags = flags;
|
|
acb->is_write = is_write;
|
|
|
|
co = qemu_coroutine_create(bdrv_co_do_rw);
|
|
qemu_coroutine_enter(co, acb);
|
|
|
|
bdrv_co_maybe_schedule_bh(acb);
|
|
return &acb->common;
|
|
}
|
|
|
|
static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
|
|
{
|
|
BlockAIOCBCoroutine *acb = opaque;
|
|
BlockDriverState *bs = acb->common.bs;
|
|
|
|
acb->req.error = bdrv_co_flush(bs);
|
|
bdrv_co_complete(acb);
|
|
}
|
|
|
|
BlockAIOCB *bdrv_aio_flush(BlockDriverState *bs,
|
|
BlockCompletionFunc *cb, void *opaque)
|
|
{
|
|
trace_bdrv_aio_flush(bs, opaque);
|
|
|
|
Coroutine *co;
|
|
BlockAIOCBCoroutine *acb;
|
|
|
|
acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
|
|
acb->need_bh = true;
|
|
acb->req.error = -EINPROGRESS;
|
|
|
|
co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
|
|
qemu_coroutine_enter(co, acb);
|
|
|
|
bdrv_co_maybe_schedule_bh(acb);
|
|
return &acb->common;
|
|
}
|
|
|
|
static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
|
|
{
|
|
BlockAIOCBCoroutine *acb = opaque;
|
|
BlockDriverState *bs = acb->common.bs;
|
|
|
|
acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
|
|
bdrv_co_complete(acb);
|
|
}
|
|
|
|
BlockAIOCB *bdrv_aio_discard(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors,
|
|
BlockCompletionFunc *cb, void *opaque)
|
|
{
|
|
Coroutine *co;
|
|
BlockAIOCBCoroutine *acb;
|
|
|
|
trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
|
|
|
|
acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
|
|
acb->need_bh = true;
|
|
acb->req.error = -EINPROGRESS;
|
|
acb->req.sector = sector_num;
|
|
acb->req.nb_sectors = nb_sectors;
|
|
co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
|
|
qemu_coroutine_enter(co, acb);
|
|
|
|
bdrv_co_maybe_schedule_bh(acb);
|
|
return &acb->common;
|
|
}
|
|
|
|
void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
|
|
BlockCompletionFunc *cb, void *opaque)
|
|
{
|
|
BlockAIOCB *acb;
|
|
|
|
acb = g_slice_alloc(aiocb_info->aiocb_size);
|
|
acb->aiocb_info = aiocb_info;
|
|
acb->bs = bs;
|
|
acb->cb = cb;
|
|
acb->opaque = opaque;
|
|
acb->refcnt = 1;
|
|
return acb;
|
|
}
|
|
|
|
void qemu_aio_ref(void *p)
|
|
{
|
|
BlockAIOCB *acb = p;
|
|
acb->refcnt++;
|
|
}
|
|
|
|
void qemu_aio_unref(void *p)
|
|
{
|
|
BlockAIOCB *acb = p;
|
|
assert(acb->refcnt > 0);
|
|
if (--acb->refcnt == 0) {
|
|
g_slice_free1(acb->aiocb_info->aiocb_size, acb);
|
|
}
|
|
}
|
|
|
|
/**************************************************************/
|
|
/* Coroutine block device emulation */
|
|
|
|
typedef struct CoroutineIOCompletion {
|
|
Coroutine *coroutine;
|
|
int ret;
|
|
} CoroutineIOCompletion;
|
|
|
|
static void bdrv_co_io_em_complete(void *opaque, int ret)
|
|
{
|
|
CoroutineIOCompletion *co = opaque;
|
|
|
|
co->ret = ret;
|
|
qemu_coroutine_enter(co->coroutine, NULL);
|
|
}
|
|
|
|
static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
|
|
int nb_sectors, QEMUIOVector *iov,
|
|
bool is_write)
|
|
{
|
|
CoroutineIOCompletion co = {
|
|
.coroutine = qemu_coroutine_self(),
|
|
};
|
|
BlockAIOCB *acb;
|
|
|
|
if (is_write) {
|
|
acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
|
|
bdrv_co_io_em_complete, &co);
|
|
} else {
|
|
acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
|
|
bdrv_co_io_em_complete, &co);
|
|
}
|
|
|
|
trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
|
|
if (!acb) {
|
|
return -EIO;
|
|
}
|
|
qemu_coroutine_yield();
|
|
|
|
return co.ret;
|
|
}
|
|
|
|
static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors,
|
|
QEMUIOVector *iov)
|
|
{
|
|
return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
|
|
}
|
|
|
|
static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
|
|
int64_t sector_num, int nb_sectors,
|
|
QEMUIOVector *iov)
|
|
{
|
|
return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
|
|
}
|
|
|
|
static void coroutine_fn bdrv_flush_co_entry(void *opaque)
|
|
{
|
|
RwCo *rwco = opaque;
|
|
|
|
rwco->ret = bdrv_co_flush(rwco->bs);
|
|
}
|
|
|
|
int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
|
|
{
|
|
int ret;
|
|
|
|
if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs) ||
|
|
bdrv_is_sg(bs)) {
|
|
return 0;
|
|
}
|
|
|
|
/* Write back cached data to the OS even with cache=unsafe */
|
|
BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
|
|
if (bs->drv->bdrv_co_flush_to_os) {
|
|
ret = bs->drv->bdrv_co_flush_to_os(bs);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* But don't actually force it to the disk with cache=unsafe */
|
|
if (bs->open_flags & BDRV_O_NO_FLUSH) {
|
|
goto flush_parent;
|
|
}
|
|
|
|
BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
|
|
if (bs->drv->bdrv_co_flush_to_disk) {
|
|
ret = bs->drv->bdrv_co_flush_to_disk(bs);
|
|
} else if (bs->drv->bdrv_aio_flush) {
|
|
BlockAIOCB *acb;
|
|
CoroutineIOCompletion co = {
|
|
.coroutine = qemu_coroutine_self(),
|
|
};
|
|
|
|
acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
|
|
if (acb == NULL) {
|
|
ret = -EIO;
|
|
} else {
|
|
qemu_coroutine_yield();
|
|
ret = co.ret;
|
|
}
|
|
} else {
|
|
/*
|
|
* Some block drivers always operate in either writethrough or unsafe
|
|
* mode and don't support bdrv_flush therefore. Usually qemu doesn't
|
|
* know how the server works (because the behaviour is hardcoded or
|
|
* depends on server-side configuration), so we can't ensure that
|
|
* everything is safe on disk. Returning an error doesn't work because
|
|
* that would break guests even if the server operates in writethrough
|
|
* mode.
|
|
*
|
|
* Let's hope the user knows what he's doing.
|
|
*/
|
|
ret = 0;
|
|
}
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
/* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
|
|
* in the case of cache=unsafe, so there are no useless flushes.
|
|
*/
|
|
flush_parent:
|
|
return bdrv_co_flush(bs->file);
|
|
}
|
|
|
|
int bdrv_flush(BlockDriverState *bs)
|
|
{
|
|
Coroutine *co;
|
|
RwCo rwco = {
|
|
.bs = bs,
|
|
.ret = NOT_DONE,
|
|
};
|
|
|
|
if (qemu_in_coroutine()) {
|
|
/* Fast-path if already in coroutine context */
|
|
bdrv_flush_co_entry(&rwco);
|
|
} else {
|
|
AioContext *aio_context = bdrv_get_aio_context(bs);
|
|
|
|
co = qemu_coroutine_create(bdrv_flush_co_entry);
|
|
qemu_coroutine_enter(co, &rwco);
|
|
while (rwco.ret == NOT_DONE) {
|
|
aio_poll(aio_context, true);
|
|
}
|
|
}
|
|
|
|
return rwco.ret;
|
|
}
|
|
|
|
typedef struct DiscardCo {
|
|
BlockDriverState *bs;
|
|
int64_t sector_num;
|
|
int nb_sectors;
|
|
int ret;
|
|
} DiscardCo;
|
|
static void coroutine_fn bdrv_discard_co_entry(void *opaque)
|
|
{
|
|
DiscardCo *rwco = opaque;
|
|
|
|
rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
|
|
}
|
|
|
|
int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
|
|
int nb_sectors)
|
|
{
|
|
int max_discard, ret;
|
|
|
|
if (!bs->drv) {
|
|
return -ENOMEDIUM;
|
|
}
|
|
|
|
ret = bdrv_check_request(bs, sector_num, nb_sectors);
|
|
if (ret < 0) {
|
|
return ret;
|
|
} else if (bs->read_only) {
|
|
return -EPERM;
|
|
}
|
|
|
|
bdrv_reset_dirty(bs, sector_num, nb_sectors);
|
|
|
|
/* Do nothing if disabled. */
|
|
if (!(bs->open_flags & BDRV_O_UNMAP)) {
|
|
return 0;
|
|
}
|
|
|
|
if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
|
|
return 0;
|
|
}
|
|
|
|
max_discard = MIN_NON_ZERO(bs->bl.max_discard, BDRV_REQUEST_MAX_SECTORS);
|
|
while (nb_sectors > 0) {
|
|
int ret;
|
|
int num = nb_sectors;
|
|
|
|
/* align request */
|
|
if (bs->bl.discard_alignment &&
|
|
num >= bs->bl.discard_alignment &&
|
|
sector_num % bs->bl.discard_alignment) {
|
|
if (num > bs->bl.discard_alignment) {
|
|
num = bs->bl.discard_alignment;
|
|
}
|
|
num -= sector_num % bs->bl.discard_alignment;
|
|
}
|
|
|
|
/* limit request size */
|
|
if (num > max_discard) {
|
|
num = max_discard;
|
|
}
|
|
|
|
if (bs->drv->bdrv_co_discard) {
|
|
ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
|
|
} else {
|
|
BlockAIOCB *acb;
|
|
CoroutineIOCompletion co = {
|
|
.coroutine = qemu_coroutine_self(),
|
|
};
|
|
|
|
acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
|
|
bdrv_co_io_em_complete, &co);
|
|
if (acb == NULL) {
|
|
return -EIO;
|
|
} else {
|
|
qemu_coroutine_yield();
|
|
ret = co.ret;
|
|
}
|
|
}
|
|
if (ret && ret != -ENOTSUP) {
|
|
return ret;
|
|
}
|
|
|
|
sector_num += num;
|
|
nb_sectors -= num;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
|
|
{
|
|
Coroutine *co;
|
|
DiscardCo rwco = {
|
|
.bs = bs,
|
|
.sector_num = sector_num,
|
|
.nb_sectors = nb_sectors,
|
|
.ret = NOT_DONE,
|
|
};
|
|
|
|
if (qemu_in_coroutine()) {
|
|
/* Fast-path if already in coroutine context */
|
|
bdrv_discard_co_entry(&rwco);
|
|
} else {
|
|
AioContext *aio_context = bdrv_get_aio_context(bs);
|
|
|
|
co = qemu_coroutine_create(bdrv_discard_co_entry);
|
|
qemu_coroutine_enter(co, &rwco);
|
|
while (rwco.ret == NOT_DONE) {
|
|
aio_poll(aio_context, true);
|
|
}
|
|
}
|
|
|
|
return rwco.ret;
|
|
}
|
|
|
|
/* needed for generic scsi interface */
|
|
|
|
int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
|
|
if (drv && drv->bdrv_ioctl)
|
|
return drv->bdrv_ioctl(bs, req, buf);
|
|
return -ENOTSUP;
|
|
}
|
|
|
|
BlockAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
|
|
unsigned long int req, void *buf,
|
|
BlockCompletionFunc *cb, void *opaque)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
|
|
if (drv && drv->bdrv_aio_ioctl)
|
|
return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
|
|
return NULL;
|
|
}
|
|
|
|
void *qemu_blockalign(BlockDriverState *bs, size_t size)
|
|
{
|
|
return qemu_memalign(bdrv_opt_mem_align(bs), size);
|
|
}
|
|
|
|
void *qemu_blockalign0(BlockDriverState *bs, size_t size)
|
|
{
|
|
return memset(qemu_blockalign(bs, size), 0, size);
|
|
}
|
|
|
|
void *qemu_try_blockalign(BlockDriverState *bs, size_t size)
|
|
{
|
|
size_t align = bdrv_opt_mem_align(bs);
|
|
|
|
/* Ensure that NULL is never returned on success */
|
|
assert(align > 0);
|
|
if (size == 0) {
|
|
size = align;
|
|
}
|
|
|
|
return qemu_try_memalign(align, size);
|
|
}
|
|
|
|
void *qemu_try_blockalign0(BlockDriverState *bs, size_t size)
|
|
{
|
|
void *mem = qemu_try_blockalign(bs, size);
|
|
|
|
if (mem) {
|
|
memset(mem, 0, size);
|
|
}
|
|
|
|
return mem;
|
|
}
|
|
|
|
/*
|
|
* Check if all memory in this vector is sector aligned.
|
|
*/
|
|
bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
|
|
{
|
|
int i;
|
|
size_t alignment = bdrv_min_mem_align(bs);
|
|
|
|
for (i = 0; i < qiov->niov; i++) {
|
|
if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
|
|
return false;
|
|
}
|
|
if (qiov->iov[i].iov_len % alignment) {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
void bdrv_add_before_write_notifier(BlockDriverState *bs,
|
|
NotifierWithReturn *notifier)
|
|
{
|
|
notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
|
|
}
|
|
|
|
void bdrv_io_plug(BlockDriverState *bs)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
if (drv && drv->bdrv_io_plug) {
|
|
drv->bdrv_io_plug(bs);
|
|
} else if (bs->file) {
|
|
bdrv_io_plug(bs->file);
|
|
}
|
|
}
|
|
|
|
void bdrv_io_unplug(BlockDriverState *bs)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
if (drv && drv->bdrv_io_unplug) {
|
|
drv->bdrv_io_unplug(bs);
|
|
} else if (bs->file) {
|
|
bdrv_io_unplug(bs->file);
|
|
}
|
|
}
|
|
|
|
void bdrv_flush_io_queue(BlockDriverState *bs)
|
|
{
|
|
BlockDriver *drv = bs->drv;
|
|
if (drv && drv->bdrv_flush_io_queue) {
|
|
drv->bdrv_flush_io_queue(bs);
|
|
} else if (bs->file) {
|
|
bdrv_flush_io_queue(bs->file);
|
|
}
|
|
bdrv_start_throttled_reqs(bs);
|
|
}
|