mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
18cf3d07a2
qemu/hw/riscv/boot.c
Richard Henderson db23e5d981 target/riscv: Replace riscv_cpu_is_32bit with riscv_cpu_mxl 
Shortly, the set of supported XL will not be just 32 and 64,
and representing that properly using the enumeration will be
imperative.

Two places, booting and gdb, intentionally use misa_mxl_max
to emphasize the use of the reset value of misa.mxl, and not
the current cpu state.

Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-5-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22 07:47:51 +10:00

295 lines
10 KiB
C
Raw Blame History

/*
* QEMU RISC-V Boot Helper
*
* Copyright (c) 2017 SiFive, Inc.
* Copyright (c) 2019 Alistair Francis <alistair.francis@wdc.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/datadir.h"
#include "qemu/units.h"
#include "qemu/error-report.h"
#include "exec/cpu-defs.h"
#include "hw/boards.h"
#include "hw/loader.h"
#include "hw/riscv/boot.h"
#include "hw/riscv/boot_opensbi.h"
#include "elf.h"
#include "sysemu/device_tree.h"
#include "sysemu/qtest.h"
#include <libfdt.h>
bool riscv_is_32bit(RISCVHartArrayState *harts)
{
return harts->harts[0].env.misa_mxl_max == MXL_RV32;
}
target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState *harts,
target_ulong firmware_end_addr) {
if (riscv_is_32bit(harts)) {
return QEMU_ALIGN_UP(firmware_end_addr, 4 * MiB);
} else {
return QEMU_ALIGN_UP(firmware_end_addr, 2 * MiB);
}
}
target_ulong riscv_find_and_load_firmware(MachineState *machine,
const char *default_machine_firmware,
hwaddr firmware_load_addr,
symbol_fn_t sym_cb)
{
char *firmware_filename = NULL;
target_ulong firmware_end_addr = firmware_load_addr;
if ((!machine->firmware) || (!strcmp(machine->firmware, "default"))) {
/*
* The user didn't specify -bios, or has specified "-bios default".
* That means we are going to load the OpenSBI binary included in
* the QEMU source.
*/
firmware_filename = riscv_find_firmware(default_machine_firmware);
} else if (strcmp(machine->firmware, "none")) {
firmware_filename = riscv_find_firmware(machine->firmware);
}
if (firmware_filename) {
/* If not "none" load the firmware */
firmware_end_addr = riscv_load_firmware(firmware_filename,
firmware_load_addr, sym_cb);
g_free(firmware_filename);
}
return firmware_end_addr;
}
char *riscv_find_firmware(const char *firmware_filename)
{
char *filename;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, firmware_filename);
if (filename == NULL) {
if (!qtest_enabled()) {
/*
* We only ship plain binary bios images in the QEMU source.
* With Spike machine that uses ELF images as the default bios,
* running QEMU test will complain hence let's suppress the error
* report for QEMU testing.
*/
error_report("Unable to load the RISC-V firmware \"%s\"",
firmware_filename);
exit(1);
}
}
return filename;
}
target_ulong riscv_load_firmware(const char *firmware_filename,
hwaddr firmware_load_addr,
symbol_fn_t sym_cb)
{
uint64_t firmware_entry, firmware_size, firmware_end;
if (load_elf_ram_sym(firmware_filename, NULL, NULL, NULL,
&firmware_entry, NULL, &firmware_end, NULL,
0, EM_RISCV, 1, 0, NULL, true, sym_cb) > 0) {
return firmware_end;
}
firmware_size = load_image_targphys_as(firmware_filename,
firmware_load_addr,
current_machine->ram_size, NULL);
if (firmware_size > 0) {
return firmware_load_addr + firmware_size;
}
error_report("could not load firmware '%s'", firmware_filename);
exit(1);
}
target_ulong riscv_load_kernel(const char *kernel_filename,
target_ulong kernel_start_addr,
symbol_fn_t sym_cb)
{
uint64_t kernel_entry;
if (load_elf_ram_sym(kernel_filename, NULL, NULL, NULL,
&kernel_entry, NULL, NULL, NULL, 0,
EM_RISCV, 1, 0, NULL, true, sym_cb) > 0) {
return kernel_entry;
}
if (load_uimage_as(kernel_filename, &kernel_entry, NULL, NULL,
NULL, NULL, NULL) > 0) {
return kernel_entry;
}
if (load_image_targphys_as(kernel_filename, kernel_start_addr,
current_machine->ram_size, NULL) > 0) {
return kernel_start_addr;
}
error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size,
uint64_t kernel_entry, hwaddr *start)
{
int size;
/*
* We want to put the initrd far enough into RAM that when the
* kernel is uncompressed it will not clobber the initrd. However
* on boards without much RAM we must ensure that we still leave
* enough room for a decent sized initrd, and on boards with large
* amounts of RAM we must avoid the initrd being so far up in RAM
* that it is outside lowmem and inaccessible to the kernel.
* So for boards with less than 256MB of RAM we put the initrd
* halfway into RAM, and for boards with 256MB of RAM or more we put
* the initrd at 128MB.
*/
*start = kernel_entry + MIN(mem_size / 2, 128 * MiB);
size = load_ramdisk(filename, *start, mem_size - *start);
if (size == -1) {
size = load_image_targphys(filename, *start, mem_size - *start);
if (size == -1) {
error_report("could not load ramdisk '%s'", filename);
exit(1);
}
}
return *start + size;
}
uint32_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt)
{
uint32_t temp, fdt_addr;
hwaddr dram_end = dram_base + mem_size;
int ret, fdtsize = fdt_totalsize(fdt);
if (fdtsize <= 0) {
error_report("invalid device-tree");
exit(1);
}
/*
* We should put fdt as far as possible to avoid kernel/initrd overwriting
* its content. But it should be addressable by 32 bit system as well.
* Thus, put it at an 16MB aligned address that less than fdt size from the
* end of dram or 3GB whichever is lesser.
*/
temp = MIN(dram_end, 3072 * MiB);
fdt_addr = QEMU_ALIGN_DOWN(temp - fdtsize, 16 * MiB);
ret = fdt_pack(fdt);
/* Should only fail if we've built a corrupted tree */
g_assert(ret == 0);
/* copy in the device tree */
qemu_fdt_dumpdtb(fdt, fdtsize);
rom_add_blob_fixed_as("fdt", fdt, fdtsize, fdt_addr,
&address_space_memory);
return fdt_addr;
}
void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
hwaddr rom_size, uint32_t reset_vec_size,
uint64_t kernel_entry)
{
struct fw_dynamic_info dinfo;
size_t dinfo_len;
if (sizeof(dinfo.magic) == 4) {
dinfo.magic = cpu_to_le32(FW_DYNAMIC_INFO_MAGIC_VALUE);
dinfo.version = cpu_to_le32(FW_DYNAMIC_INFO_VERSION);
dinfo.next_mode = cpu_to_le32(FW_DYNAMIC_INFO_NEXT_MODE_S);
dinfo.next_addr = cpu_to_le32(kernel_entry);
} else {
dinfo.magic = cpu_to_le64(FW_DYNAMIC_INFO_MAGIC_VALUE);
dinfo.version = cpu_to_le64(FW_DYNAMIC_INFO_VERSION);
dinfo.next_mode = cpu_to_le64(FW_DYNAMIC_INFO_NEXT_MODE_S);
dinfo.next_addr = cpu_to_le64(kernel_entry);
}
dinfo.options = 0;
dinfo.boot_hart = 0;
dinfo_len = sizeof(dinfo);
/**
* copy the dynamic firmware info. This information is specific to
* OpenSBI but doesn't break any other firmware as long as they don't
* expect any certain value in "a2" register.
*/
if (dinfo_len > (rom_size - reset_vec_size)) {
error_report("not enough space to store dynamic firmware info");
exit(1);
}
rom_add_blob_fixed_as("mrom.finfo", &dinfo, dinfo_len,
rom_base + reset_vec_size,
&address_space_memory);
}
void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts,
hwaddr start_addr,
hwaddr rom_base, hwaddr rom_size,
uint64_t kernel_entry,
uint32_t fdt_load_addr, void *fdt)
{
int i;
uint32_t start_addr_hi32 = 0x00000000;
if (!riscv_is_32bit(harts)) {
start_addr_hi32 = start_addr >> 32;
}
/* reset vector */
uint32_t reset_vec[10] = {
0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */
0x02828613, /* addi a2, t0, %pcrel_lo(1b) */
0xf1402573, /* csrr a0, mhartid */
0,
0,
0x00028067, /* jr t0 */
start_addr, /* start: .dword */
start_addr_hi32,
fdt_load_addr, /* fdt_laddr: .dword */
0x00000000,
/* fw_dyn: */
};
if (riscv_is_32bit(harts)) {
reset_vec[3] = 0x0202a583; /* lw a1, 32(t0) */
reset_vec[4] = 0x0182a283; /* lw t0, 24(t0) */
} else {
reset_vec[3] = 0x0202b583; /* ld a1, 32(t0) */
reset_vec[4] = 0x0182b283; /* ld t0, 24(t0) */
}
/* copy in the reset vector in little_endian byte order */
for (i = 0; i < ARRAY_SIZE(reset_vec); i++) {
reset_vec[i] = cpu_to_le32(reset_vec[i]);
}
rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
rom_base, &address_space_memory);
riscv_rom_copy_firmware_info(machine, rom_base, rom_size, sizeof(reset_vec),
kernel_entry);
return;
}
Reference in New Issue View Git Blame Copy Permalink