176e4961bb
CHS-based disk utilities and operating systems may adjust the logical geometry of a hard drive to cope with the expectations or limitations of software using the ATA INITIALIZE_DEVICE_PARAMETERS command. Prior to this patch, INITIALIZE_DEVICE_PARAMETERS was a nop that always returned success, raising the possibility of data loss or corruption if the CHS<->LBA translation redirected a write to the wrong sector. * hw/ide/core.c ide_reset(): Reset the logical CHS geometry of the hard disk when the power-on defaults feature is enabled. cmd_specify(): a) New function implementing INITIALIZE_DEVICE_PARAMETERS. b) Ignore calls for empty or ATAPI devices. cmd_set_features(): Implement the power-on defaults enable and disable features. struct ide_cmd_table: Switch WIN_SPECIFY from cmd_nop() to cmd_specify(). ide_init_drive(): Set new fields 'drive_heads' and 'drive_sectors' based upon the actual disk geometry. * include/hw/ide/internal.h struct IDEState: a) Store the actual drive CHS values within the new fields 'drive_heads' and 'drive_sectors.' b) Track whether a soft IDE reset should also reset the logical CHS geometry of the hard disk within the new field 'reset_reverts'. Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org> Message-Id: <20220707031140.158958-7-lkujaw@member.fsf.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
661 lines
23 KiB
C
661 lines
23 KiB
C
#ifndef HW_IDE_INTERNAL_H
|
|
#define HW_IDE_INTERNAL_H
|
|
|
|
/*
|
|
* QEMU IDE Emulation -- internal header file
|
|
* only files in hw/ide/ are supposed to include this file.
|
|
* non-internal declarations are in hw/ide.h
|
|
*/
|
|
|
|
#include "qapi/qapi-types-run-state.h"
|
|
#include "hw/ide.h"
|
|
#include "hw/irq.h"
|
|
#include "hw/isa/isa.h"
|
|
#include "sysemu/dma.h"
|
|
#include "hw/block/block.h"
|
|
#include "scsi/constants.h"
|
|
|
|
/* debug IDE devices */
|
|
#define USE_DMA_CDROM
|
|
#include "qom/object.h"
|
|
|
|
typedef struct IDEDevice IDEDevice;
|
|
typedef struct IDEState IDEState;
|
|
typedef struct IDEDMA IDEDMA;
|
|
typedef struct IDEDMAOps IDEDMAOps;
|
|
|
|
#define TYPE_IDE_BUS "IDE"
|
|
OBJECT_DECLARE_SIMPLE_TYPE(IDEBus, IDE_BUS)
|
|
|
|
#define MAX_IDE_DEVS 2
|
|
|
|
/* Device/Head ("select") Register */
|
|
#define ATA_DEV_SELECT 0x10
|
|
/* ATA1,3: Defined as '1'.
|
|
* ATA2: Reserved.
|
|
* ATA3-7: obsolete. */
|
|
#define ATA_DEV_ALWAYS_ON 0xA0
|
|
#define ATA_DEV_LBA 0x40
|
|
#define ATA_DEV_LBA_MSB 0x0F /* LBA 24:27 */
|
|
#define ATA_DEV_HS 0x0F /* HS 3:0 */
|
|
|
|
|
|
/* Bits of HD_STATUS */
|
|
#define ERR_STAT 0x01
|
|
#define INDEX_STAT 0x02
|
|
#define ECC_STAT 0x04 /* Corrected error */
|
|
#define DRQ_STAT 0x08
|
|
#define SEEK_STAT 0x10
|
|
#define SRV_STAT 0x10
|
|
#define WRERR_STAT 0x20
|
|
#define READY_STAT 0x40
|
|
#define BUSY_STAT 0x80
|
|
|
|
/* Bits for HD_ERROR */
|
|
#define MARK_ERR 0x01 /* Bad address mark */
|
|
#define TRK0_ERR 0x02 /* couldn't find track 0 */
|
|
#define ABRT_ERR 0x04 /* Command aborted */
|
|
#define MCR_ERR 0x08 /* media change request */
|
|
#define ID_ERR 0x10 /* ID field not found */
|
|
#define MC_ERR 0x20 /* media changed */
|
|
#define ECC_ERR 0x40 /* Uncorrectable ECC error */
|
|
#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
|
|
#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
|
|
|
|
/* Bits of HD_NSECTOR */
|
|
#define CD 0x01
|
|
#define IO 0x02
|
|
#define REL 0x04
|
|
#define TAG_MASK 0xf8
|
|
|
|
/* Bits of Device Control register */
|
|
#define IDE_CTRL_HOB 0x80
|
|
#define IDE_CTRL_RESET 0x04
|
|
#define IDE_CTRL_DISABLE_IRQ 0x02
|
|
|
|
/* ACS-2 T13/2015-D Table B.2 Command codes */
|
|
#define WIN_NOP 0x00
|
|
/* reserved 0x01..0x02 */
|
|
#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
|
|
/* reserved 0x04..0x05 */
|
|
#define WIN_DSM 0x06
|
|
/* reserved 0x07 */
|
|
#define WIN_DEVICE_RESET 0x08
|
|
/* reserved 0x09..0x0a */
|
|
/* REQUEST SENSE DATA EXT 0x0B */
|
|
/* reserved 0x0C..0x0F */
|
|
#define WIN_RECAL 0x10 /* obsolete since ATA4 */
|
|
/* obsolete since ATA3, retired in ATA4 0x11..0x1F */
|
|
#define WIN_READ 0x20 /* 28-Bit */
|
|
#define WIN_READ_ONCE 0x21 /* 28-Bit w/o retries, obsolete since ATA5 */
|
|
/* obsolete since ATA4 0x22..0x23 */
|
|
#define WIN_READ_EXT 0x24 /* 48-Bit */
|
|
#define WIN_READDMA_EXT 0x25 /* 48-Bit */
|
|
#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit, obsolete since ACS2 */
|
|
#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
|
|
/* reserved 0x28 */
|
|
#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
|
|
/* READ STREAM DMA EXT 0x2A */
|
|
/* READ STREAM EXT 0x2B */
|
|
/* reserved 0x2C..0x2E */
|
|
/* READ LOG EXT 0x2F */
|
|
#define WIN_WRITE 0x30 /* 28-Bit */
|
|
#define WIN_WRITE_ONCE 0x31 /* 28-Bit w/o retries, obsolete since ATA5 */
|
|
/* obsolete since ATA4 0x32..0x33 */
|
|
#define WIN_WRITE_EXT 0x34 /* 48-Bit */
|
|
#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
|
|
#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
|
|
#define WIN_SET_MAX_EXT 0x37 /* 48-Bit, obsolete since ACS2 */
|
|
#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
|
|
#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
|
|
#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
|
|
/* WRITE STREAM DMA EXT 0x3A */
|
|
/* WRITE STREAM EXT 0x3B */
|
|
#define WIN_WRITE_VERIFY 0x3C /* 28-Bit, obsolete since ATA4 */
|
|
/* WRITE DMA FUA EXT 0x3D */
|
|
/* obsolete since ACS2 0x3E */
|
|
/* WRITE LOG EXT 0x3F */
|
|
#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
|
|
#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */
|
|
#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
|
|
/* reserved 0x43..0x44 */
|
|
/* WRITE UNCORRECTABLE EXT 0x45 */
|
|
/* reserved 0x46 */
|
|
/* READ LOG DMA EXT 0x47 */
|
|
/* reserved 0x48..0x4F */
|
|
/* obsolete since ATA4 0x50 */
|
|
/* CONFIGURE STREAM 0x51 */
|
|
/* reserved 0x52..0x56 */
|
|
/* WRITE LOG DMA EXT 0x57 */
|
|
/* reserved 0x58..0x5A */
|
|
/* TRUSTED NON DATA 0x5B */
|
|
/* TRUSTED RECEIVE 0x5C */
|
|
/* TRUSTED RECEIVE DMA 0x5D */
|
|
/* TRUSTED SEND 0x5E */
|
|
/* TRUSTED SEND DMA 0x5F */
|
|
/* READ FPDMA QUEUED 0x60 */
|
|
/* WRITE FPDMA QUEUED 0x61 */
|
|
/* reserved 0x62->0x6F */
|
|
#define WIN_SEEK 0x70 /* obsolete since ATA7 */
|
|
/* reserved 0x71-0x7F */
|
|
/* vendor specific 0x80-0x86 */
|
|
#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
|
|
/* vendor specific 0x88-0x8F */
|
|
#define WIN_DIAGNOSE 0x90
|
|
#define WIN_SPECIFY 0x91 /* set drive geometry translation, obsolete since ATA6 */
|
|
#define WIN_DOWNLOAD_MICROCODE 0x92
|
|
/* DOWNLOAD MICROCODE DMA 0x93 */
|
|
#define WIN_STANDBYNOW2 0x94 /* retired in ATA4 */
|
|
#define WIN_IDLEIMMEDIATE2 0x95 /* force drive to become "ready", retired in ATA4 */
|
|
#define WIN_STANDBY2 0x96 /* retired in ATA4 */
|
|
#define WIN_SETIDLE2 0x97 /* retired in ATA4 */
|
|
#define WIN_CHECKPOWERMODE2 0x98 /* retired in ATA4 */
|
|
#define WIN_SLEEPNOW2 0x99 /* retired in ATA4 */
|
|
/* vendor specific 0x9A */
|
|
/* reserved 0x9B..0x9F */
|
|
#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
|
|
#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
|
|
#define WIN_QUEUED_SERVICE 0xA2 /* obsolete since ACS2 */
|
|
/* reserved 0xA3..0xAF */
|
|
#define WIN_SMART 0xB0 /* self-monitoring and reporting */
|
|
/* Device Configuration Overlay 0xB1 */
|
|
/* reserved 0xB2..0xB3 */
|
|
/* Sanitize Device 0xB4 */
|
|
/* reserved 0xB5 */
|
|
/* NV Cache 0xB6 */
|
|
/* reserved for CFA 0xB7..0xBB */
|
|
#define CFA_ACCESS_METADATA_STORAGE 0xB8
|
|
/* reserved 0xBC..0xBF */
|
|
#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
|
|
/* vendor specific 0xC1..0xC3 */
|
|
#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
|
|
#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
|
|
#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
|
|
#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */
|
|
#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
|
|
#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */
|
|
#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
|
|
#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */
|
|
#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */
|
|
#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
|
|
/* WRITE MULTIPLE FUA EXT 0xCE */
|
|
/* reserved 0xCF..0xDO */
|
|
/* CHECK MEDIA CARD TYPE 0xD1 */
|
|
/* reserved for media card pass through 0xD2..0xD4 */
|
|
/* reserved 0xD5..0xD9 */
|
|
#define WIN_GETMEDIASTATUS 0xDA /* obsolete since ATA8 */
|
|
/* obsolete since ATA3, retired in ATA4 0xDB..0xDD */
|
|
#define WIN_DOORLOCK 0xDE /* lock door on removable drives, obsolete since ATA8 */
|
|
#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives, obsolete since ATA8 */
|
|
#define WIN_STANDBYNOW1 0xE0
|
|
#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
|
|
#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
|
|
#define WIN_SETIDLE1 0xE3
|
|
#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
|
|
#define WIN_CHECKPOWERMODE1 0xE5
|
|
#define WIN_SLEEPNOW1 0xE6
|
|
#define WIN_FLUSH_CACHE 0xE7
|
|
#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
|
|
/* READ BUFFER DMA 0xE9 */
|
|
#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
|
|
/* WRITE BUFFER DMA 0xEB */
|
|
#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
|
|
#define WIN_MEDIAEJECT 0xED /* obsolete since ATA8 */
|
|
/* obsolete since ATA4 0xEE */
|
|
#define WIN_SETFEATURES 0xEF /* set special drive features */
|
|
#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature, vendor specific */
|
|
#define WIN_SECURITY_SET_PASS 0xF1
|
|
#define WIN_SECURITY_UNLOCK 0xF2
|
|
#define WIN_SECURITY_ERASE_PREPARE 0xF3
|
|
#define WIN_SECURITY_ERASE_UNIT 0xF4
|
|
#define WIN_SECURITY_FREEZE_LOCK 0xF5
|
|
#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP; not specified in T13! */
|
|
#define WIN_SECURITY_DISABLE 0xF6
|
|
/* vendor specific 0xF7 */
|
|
#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
|
|
#define WIN_SET_MAX 0xF9
|
|
/* vendor specific 0xFA..0xFF */
|
|
|
|
/* set to 1 set disable mult support */
|
|
#define MAX_MULT_SECTORS 16
|
|
|
|
#define IDE_DMA_BUF_SECTORS 256
|
|
|
|
/* feature values for Data Set Management */
|
|
#define DSM_TRIM 0x01
|
|
|
|
#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
|
|
#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
|
|
#endif
|
|
|
|
/* ATAPI defines */
|
|
|
|
#define ATAPI_PACKET_SIZE 12
|
|
|
|
/* The generic packet command opcodes for CD/DVD Logical Units,
|
|
* From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
|
|
#define GPCMD_BLANK 0xa1
|
|
#define GPCMD_CLOSE_TRACK 0x5b
|
|
#define GPCMD_FLUSH_CACHE 0x35
|
|
#define GPCMD_FORMAT_UNIT 0x04
|
|
#define GPCMD_GET_CONFIGURATION 0x46
|
|
#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
|
|
#define GPCMD_GET_PERFORMANCE 0xac
|
|
#define GPCMD_INQUIRY 0x12
|
|
#define GPCMD_LOAD_UNLOAD 0xa6
|
|
#define GPCMD_MECHANISM_STATUS 0xbd
|
|
#define GPCMD_MODE_SELECT_10 0x55
|
|
#define GPCMD_MODE_SENSE_10 0x5a
|
|
#define GPCMD_PAUSE_RESUME 0x4b
|
|
#define GPCMD_PLAY_AUDIO_10 0x45
|
|
#define GPCMD_PLAY_AUDIO_MSF 0x47
|
|
#define GPCMD_PLAY_AUDIO_TI 0x48
|
|
#define GPCMD_PLAY_CD 0xbc
|
|
#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
|
|
#define GPCMD_READ_10 0x28
|
|
#define GPCMD_READ_12 0xa8
|
|
#define GPCMD_READ_CDVD_CAPACITY 0x25
|
|
#define GPCMD_READ_CD 0xbe
|
|
#define GPCMD_READ_CD_MSF 0xb9
|
|
#define GPCMD_READ_DISC_INFO 0x51
|
|
#define GPCMD_READ_DVD_STRUCTURE 0xad
|
|
#define GPCMD_READ_FORMAT_CAPACITIES 0x23
|
|
#define GPCMD_READ_HEADER 0x44
|
|
#define GPCMD_READ_TRACK_RZONE_INFO 0x52
|
|
#define GPCMD_READ_SUBCHANNEL 0x42
|
|
#define GPCMD_READ_TOC_PMA_ATIP 0x43
|
|
#define GPCMD_REPAIR_RZONE_TRACK 0x58
|
|
#define GPCMD_REPORT_KEY 0xa4
|
|
#define GPCMD_REQUEST_SENSE 0x03
|
|
#define GPCMD_RESERVE_RZONE_TRACK 0x53
|
|
#define GPCMD_SCAN 0xba
|
|
#define GPCMD_SEEK 0x2b
|
|
#define GPCMD_SEND_DVD_STRUCTURE 0xad
|
|
#define GPCMD_SEND_EVENT 0xa2
|
|
#define GPCMD_SEND_KEY 0xa3
|
|
#define GPCMD_SEND_OPC 0x54
|
|
#define GPCMD_SET_READ_AHEAD 0xa7
|
|
#define GPCMD_SET_STREAMING 0xb6
|
|
#define GPCMD_START_STOP_UNIT 0x1b
|
|
#define GPCMD_STOP_PLAY_SCAN 0x4e
|
|
#define GPCMD_TEST_UNIT_READY 0x00
|
|
#define GPCMD_VERIFY_10 0x2f
|
|
#define GPCMD_WRITE_10 0x2a
|
|
#define GPCMD_WRITE_AND_VERIFY_10 0x2e
|
|
/* This is listed as optional in ATAPI 2.6, but is (curiously)
|
|
* missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
|
|
* Table 377 as an MMC command for SCSi devices though... Most ATAPI
|
|
* drives support it. */
|
|
#define GPCMD_SET_SPEED 0xbb
|
|
/* This seems to be a SCSI specific CD-ROM opcode
|
|
* to play data at track/index */
|
|
#define GPCMD_PLAYAUDIO_TI 0x48
|
|
/*
|
|
* From MS Media Status Notification Support Specification. For
|
|
* older drives only.
|
|
*/
|
|
#define GPCMD_GET_MEDIA_STATUS 0xda
|
|
#define GPCMD_MODE_SENSE_6 0x1a
|
|
|
|
#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
|
|
#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
|
|
#define ATAPI_INT_REASON_REL 0x04
|
|
#define ATAPI_INT_REASON_TAG 0xf8
|
|
|
|
/* same constants as bochs */
|
|
#define ASC_NO_SEEK_COMPLETE 0x02
|
|
#define ASC_ILLEGAL_OPCODE 0x20
|
|
#define ASC_LOGICAL_BLOCK_OOR 0x21
|
|
#define ASC_INV_FIELD_IN_CMD_PACKET 0x24
|
|
#define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
|
|
#define ASC_INCOMPATIBLE_FORMAT 0x30
|
|
#define ASC_MEDIUM_NOT_PRESENT 0x3a
|
|
#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
|
|
#define ASC_DATA_PHASE_ERROR 0x4b
|
|
#define ASC_MEDIA_REMOVAL_PREVENTED 0x53
|
|
|
|
#define CFA_NO_ERROR 0x00
|
|
#define CFA_MISC_ERROR 0x09
|
|
#define CFA_INVALID_COMMAND 0x20
|
|
#define CFA_INVALID_ADDRESS 0x21
|
|
#define CFA_ADDRESS_OVERFLOW 0x2f
|
|
|
|
#define SMART_READ_DATA 0xd0
|
|
#define SMART_READ_THRESH 0xd1
|
|
#define SMART_ATTR_AUTOSAVE 0xd2
|
|
#define SMART_SAVE_ATTR 0xd3
|
|
#define SMART_EXECUTE_OFFLINE 0xd4
|
|
#define SMART_READ_LOG 0xd5
|
|
#define SMART_WRITE_LOG 0xd6
|
|
#define SMART_ENABLE 0xd8
|
|
#define SMART_DISABLE 0xd9
|
|
#define SMART_STATUS 0xda
|
|
|
|
typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;
|
|
|
|
typedef void EndTransferFunc(IDEState *);
|
|
|
|
typedef void DMAStartFunc(const IDEDMA *, IDEState *, BlockCompletionFunc *);
|
|
typedef void DMAVoidFunc(const IDEDMA *);
|
|
typedef int DMAIntFunc(const IDEDMA *, bool);
|
|
typedef int32_t DMAInt32Func(const IDEDMA *, int32_t len);
|
|
typedef void DMAu32Func(const IDEDMA *, uint32_t);
|
|
typedef void DMAStopFunc(const IDEDMA *, bool);
|
|
|
|
struct unreported_events {
|
|
bool eject_request;
|
|
bool new_media;
|
|
};
|
|
|
|
enum ide_dma_cmd {
|
|
IDE_DMA_READ = 0,
|
|
IDE_DMA_WRITE,
|
|
IDE_DMA_TRIM,
|
|
IDE_DMA_ATAPI,
|
|
IDE_DMA__COUNT
|
|
};
|
|
|
|
extern const char *IDE_DMA_CMD_lookup[IDE_DMA__COUNT];
|
|
|
|
#define ide_cmd_is_read(s) \
|
|
((s)->dma_cmd == IDE_DMA_READ)
|
|
|
|
typedef struct IDEBufferedRequest {
|
|
QLIST_ENTRY(IDEBufferedRequest) list;
|
|
QEMUIOVector qiov;
|
|
QEMUIOVector *original_qiov;
|
|
BlockCompletionFunc *original_cb;
|
|
void *original_opaque;
|
|
bool orphaned;
|
|
} IDEBufferedRequest;
|
|
|
|
/* NOTE: IDEState represents in fact one drive */
|
|
struct IDEState {
|
|
IDEBus *bus;
|
|
uint8_t unit;
|
|
/* ide config */
|
|
IDEDriveKind drive_kind;
|
|
int drive_heads, drive_sectors;
|
|
int cylinders, heads, sectors, chs_trans;
|
|
int64_t nb_sectors;
|
|
int mult_sectors;
|
|
int identify_set;
|
|
uint8_t identify_data[512];
|
|
int drive_serial;
|
|
char drive_serial_str[21];
|
|
char drive_model_str[41];
|
|
uint64_t wwn;
|
|
/* ide regs */
|
|
uint8_t feature;
|
|
uint8_t error;
|
|
uint32_t nsector;
|
|
uint8_t sector;
|
|
uint8_t lcyl;
|
|
uint8_t hcyl;
|
|
/* other part of tf for lba48 support */
|
|
uint8_t hob_feature;
|
|
uint8_t hob_nsector;
|
|
uint8_t hob_sector;
|
|
uint8_t hob_lcyl;
|
|
uint8_t hob_hcyl;
|
|
|
|
uint8_t select;
|
|
uint8_t status;
|
|
|
|
bool reset_reverts;
|
|
|
|
/* set for lba48 access */
|
|
uint8_t lba48;
|
|
BlockBackend *blk;
|
|
char version[9];
|
|
/* ATAPI specific */
|
|
struct unreported_events events;
|
|
uint8_t sense_key;
|
|
uint8_t asc;
|
|
bool tray_open;
|
|
bool tray_locked;
|
|
uint8_t cdrom_changed;
|
|
int packet_transfer_size;
|
|
int elementary_transfer_size;
|
|
int32_t io_buffer_index;
|
|
int lba;
|
|
int cd_sector_size;
|
|
int atapi_dma; /* true if dma is requested for the packet cmd */
|
|
BlockAcctCookie acct;
|
|
BlockAIOCB *pio_aiocb;
|
|
QEMUIOVector qiov;
|
|
QLIST_HEAD(, IDEBufferedRequest) buffered_requests;
|
|
/* ATA DMA state */
|
|
uint64_t io_buffer_offset;
|
|
int32_t io_buffer_size;
|
|
QEMUSGList sg;
|
|
/* PIO transfer handling */
|
|
int req_nb_sectors; /* number of sectors per interrupt */
|
|
EndTransferFunc *end_transfer_func;
|
|
uint8_t *data_ptr;
|
|
uint8_t *data_end;
|
|
uint8_t *io_buffer;
|
|
/* PIO save/restore */
|
|
int32_t io_buffer_total_len;
|
|
int32_t cur_io_buffer_offset;
|
|
int32_t cur_io_buffer_len;
|
|
uint8_t end_transfer_fn_idx;
|
|
QEMUTimer *sector_write_timer; /* only used for win2k install hack */
|
|
uint32_t irq_count; /* counts IRQs when using win2k install hack */
|
|
/* CF-ATA extended error */
|
|
uint8_t ext_error;
|
|
/* CF-ATA metadata storage */
|
|
uint32_t mdata_size;
|
|
uint8_t *mdata_storage;
|
|
int media_changed;
|
|
enum ide_dma_cmd dma_cmd;
|
|
/* SMART */
|
|
uint8_t smart_enabled;
|
|
uint8_t smart_autosave;
|
|
int smart_errors;
|
|
uint8_t smart_selftest_count;
|
|
uint8_t *smart_selftest_data;
|
|
/* AHCI */
|
|
int ncq_queues;
|
|
};
|
|
|
|
struct IDEDMAOps {
|
|
DMAStartFunc *start_dma;
|
|
DMAVoidFunc *pio_transfer;
|
|
DMAInt32Func *prepare_buf;
|
|
DMAu32Func *commit_buf;
|
|
DMAIntFunc *rw_buf;
|
|
DMAVoidFunc *restart;
|
|
DMAVoidFunc *restart_dma;
|
|
DMAStopFunc *set_inactive;
|
|
DMAVoidFunc *cmd_done;
|
|
DMAVoidFunc *reset;
|
|
};
|
|
|
|
struct IDEDMA {
|
|
const struct IDEDMAOps *ops;
|
|
QEMUIOVector qiov;
|
|
BlockAIOCB *aiocb;
|
|
};
|
|
|
|
struct IDEBus {
|
|
BusState qbus;
|
|
IDEDevice *master;
|
|
IDEDevice *slave;
|
|
IDEState ifs[2];
|
|
QEMUBH *bh;
|
|
|
|
int bus_id;
|
|
int max_units;
|
|
IDEDMA *dma;
|
|
uint8_t unit;
|
|
uint8_t cmd;
|
|
qemu_irq irq;
|
|
|
|
int error_status;
|
|
uint8_t retry_unit;
|
|
int64_t retry_sector_num;
|
|
uint32_t retry_nsector;
|
|
PortioList portio_list;
|
|
PortioList portio2_list;
|
|
VMChangeStateEntry *vmstate;
|
|
};
|
|
|
|
#define TYPE_IDE_DEVICE "ide-device"
|
|
OBJECT_DECLARE_TYPE(IDEDevice, IDEDeviceClass, IDE_DEVICE)
|
|
|
|
struct IDEDeviceClass {
|
|
DeviceClass parent_class;
|
|
void (*realize)(IDEDevice *dev, Error **errp);
|
|
};
|
|
|
|
struct IDEDevice {
|
|
DeviceState qdev;
|
|
uint32_t unit;
|
|
BlockConf conf;
|
|
int chs_trans;
|
|
char *version;
|
|
char *serial;
|
|
char *model;
|
|
uint64_t wwn;
|
|
/*
|
|
* 0x0000 - rotation rate not reported
|
|
* 0x0001 - non-rotating medium (SSD)
|
|
* 0x0002-0x0400 - reserved
|
|
* 0x0401-0xffe - rotations per minute
|
|
* 0xffff - reserved
|
|
*/
|
|
uint16_t rotation_rate;
|
|
};
|
|
|
|
/* These are used for the error_status field of IDEBus */
|
|
#define IDE_RETRY_MASK 0xf8
|
|
#define IDE_RETRY_DMA 0x08
|
|
#define IDE_RETRY_PIO 0x10
|
|
#define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */
|
|
#define IDE_RETRY_READ 0x20
|
|
#define IDE_RETRY_FLUSH 0x40
|
|
#define IDE_RETRY_TRIM 0x80
|
|
#define IDE_RETRY_HBA 0x100
|
|
|
|
#define IS_IDE_RETRY_DMA(_status) \
|
|
((_status) & IDE_RETRY_DMA)
|
|
|
|
#define IS_IDE_RETRY_PIO(_status) \
|
|
((_status) & IDE_RETRY_PIO)
|
|
|
|
/*
|
|
* The method of the IDE_RETRY_ATAPI determination is to use a previously
|
|
* impossible bit combination as a new status value.
|
|
*/
|
|
#define IS_IDE_RETRY_ATAPI(_status) \
|
|
(((_status) & IDE_RETRY_MASK) == IDE_RETRY_ATAPI)
|
|
|
|
static inline uint8_t ide_dma_cmd_to_retry(uint8_t dma_cmd)
|
|
{
|
|
switch (dma_cmd) {
|
|
case IDE_DMA_READ:
|
|
return IDE_RETRY_DMA | IDE_RETRY_READ;
|
|
case IDE_DMA_WRITE:
|
|
return IDE_RETRY_DMA;
|
|
case IDE_DMA_TRIM:
|
|
return IDE_RETRY_DMA | IDE_RETRY_TRIM;
|
|
case IDE_DMA_ATAPI:
|
|
return IDE_RETRY_ATAPI;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline IDEState *idebus_active_if(IDEBus *bus)
|
|
{
|
|
return bus->ifs + bus->unit;
|
|
}
|
|
|
|
static inline void ide_set_irq(IDEBus *bus)
|
|
{
|
|
if (!(bus->cmd & IDE_CTRL_DISABLE_IRQ)) {
|
|
qemu_irq_raise(bus->irq);
|
|
}
|
|
}
|
|
|
|
/* hw/ide/core.c */
|
|
extern const VMStateDescription vmstate_ide_bus;
|
|
|
|
#define VMSTATE_IDE_BUS(_field, _state) \
|
|
VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
|
|
|
|
#define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num) \
|
|
VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
|
|
|
|
extern const VMStateDescription vmstate_ide_drive;
|
|
|
|
#define VMSTATE_IDE_DRIVES(_field, _state) \
|
|
VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
|
|
|
|
#define VMSTATE_IDE_DRIVE(_field, _state) \
|
|
VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_drive, IDEState)
|
|
|
|
void ide_bus_reset(IDEBus *bus);
|
|
int64_t ide_get_sector(IDEState *s);
|
|
void ide_set_sector(IDEState *s, int64_t sector_num);
|
|
|
|
void ide_start_dma(IDEState *s, BlockCompletionFunc *cb);
|
|
void dma_buf_commit(IDEState *s, uint32_t tx_bytes);
|
|
void ide_dma_error(IDEState *s);
|
|
void ide_abort_command(IDEState *s);
|
|
|
|
void ide_atapi_cmd_ok(IDEState *s);
|
|
void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
|
|
void ide_atapi_dma_restart(IDEState *s);
|
|
void ide_atapi_io_error(IDEState *s, int ret);
|
|
|
|
void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
|
|
uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
|
|
uint32_t ide_status_read(void *opaque, uint32_t addr);
|
|
void ide_ctrl_write(void *opaque, uint32_t addr, uint32_t val);
|
|
void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
|
|
uint32_t ide_data_readw(void *opaque, uint32_t addr);
|
|
void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
|
|
uint32_t ide_data_readl(void *opaque, uint32_t addr);
|
|
|
|
int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind,
|
|
const char *version, const char *serial, const char *model,
|
|
uint64_t wwn,
|
|
uint32_t cylinders, uint32_t heads, uint32_t secs,
|
|
int chs_trans, Error **errp);
|
|
void ide_init2(IDEBus *bus, qemu_irq irq);
|
|
void ide_exit(IDEState *s);
|
|
int ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
|
|
void ide_register_restart_cb(IDEBus *bus);
|
|
|
|
void ide_exec_cmd(IDEBus *bus, uint32_t val);
|
|
|
|
void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
|
|
EndTransferFunc *end_transfer_func);
|
|
bool ide_transfer_start_norecurse(IDEState *s, uint8_t *buf, int size,
|
|
EndTransferFunc *end_transfer_func);
|
|
void ide_transfer_stop(IDEState *s);
|
|
void ide_set_inactive(IDEState *s, bool more);
|
|
BlockAIOCB *ide_issue_trim(
|
|
int64_t offset, QEMUIOVector *qiov,
|
|
BlockCompletionFunc *cb, void *cb_opaque, void *opaque);
|
|
BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num,
|
|
QEMUIOVector *iov, int nb_sectors,
|
|
BlockCompletionFunc *cb, void *opaque);
|
|
void ide_cancel_dma_sync(IDEState *s);
|
|
|
|
/* hw/ide/atapi.c */
|
|
void ide_atapi_cmd(IDEState *s);
|
|
void ide_atapi_cmd_reply_end(IDEState *s);
|
|
|
|
/* hw/ide/qdev.c */
|
|
void ide_bus_init(IDEBus *idebus, size_t idebus_size, DeviceState *dev,
|
|
int bus_id, int max_units);
|
|
IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
|
|
|
|
int ide_handle_rw_error(IDEState *s, int error, int op);
|
|
|
|
#endif /* HW_IDE_INTERNAL_H */
|