mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qemu/hw/arm
History
Guenter Roeck 17372bd812 hw/arm/fsl-imx6ul: Wire up USB controllers 
IMX6UL USB controllers are quite similar to IMX7 USB controllers.
Wire them up the same way.

The only real difference is that wiring up phy devices is necessary
to avoid phy reset timeouts in the Linux kernel.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200313014551.12554-5-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-17 11:23:14 +00:00
..
allwinner-a10.c
hw/arm/allwinner: add RTC device support
2020-03-12 16:27:33 +00:00
allwinner-h3.c
hw/arm/allwinner: add RTC device support
2020-03-12 16:27:33 +00:00
armsse.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
armv7m.c
hw/core/loader: Let load_elf() populate a field with CPU-specific flags
2020-01-29 19:28:52 +01:00
aspeed_ast2600.c
hw/arm: ast2600: Wire up EHCI controllers
2020-02-13 14:14:55 +00:00
aspeed_soc.c
hw/arm: ast2400/ast2500: Wire up EHCI controllers
2020-02-13 14:14:55 +00:00
aspeed.c
arm/aspeed: use memdev for RAM
2020-02-19 16:49:54 +00:00
bcm2835_peripherals.c
hw/arm/bcm2835_peripherals: Use the SYS_timer
2019-10-25 13:09:27 +01:00
bcm2836.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
boot.c
Remove unnecessary cast when using the address_space API
2020-02-20 14:47:08 +01:00
collie.c
arm/collie: use memdev for RAM
2020-02-19 16:49:54 +00:00
cubieboard.c
hw/arm/allwinner: add SD/MMC host controller
2020-03-12 16:27:33 +00:00
digic_boards.c
arm/digic_boards: use memdev for RAM
2020-02-19 16:49:54 +00:00
digic.c
…
exynos4_boards.c
Machine + x86 queue, 2019-09-03
2019-09-04 14:44:54 +01:00
exynos4210.c
hw/arm/exynos4210: Connect serial port DMA busy signals with pl330
2020-01-23 16:34:15 +00:00
fsl-imx6.c
i.MX: Add support for WDT on i.MX6
2020-02-13 14:14:52 +00:00
fsl-imx6ul.c
hw/arm/fsl-imx6ul: Wire up USB controllers
2020-03-17 11:23:14 +00:00
fsl-imx7.c
…
fsl-imx25.c
hw/arm/fsl-imx25: Wire up USB controllers
2020-03-12 16:27:33 +00:00
fsl-imx31.c
…
gumstix.c
hw/arm/gumstix: Simplify since the machines are little-endian only
2020-03-05 16:09:14 +00:00
highbank.c
arm/highbank: use memdev for RAM
2020-02-19 16:49:54 +00:00
imx25_pdk.c
hw/arm/fsl-imx25: Wire up eSDHC controllers
2020-03-12 16:27:33 +00:00
integratorcp.c
hw/arm/integratorcp: Map the audio codec controller
2020-02-28 16:14:57 +00:00
Kconfig
hw/usb: Add basic i.MX USB Phy support
2020-03-17 11:23:14 +00:00
kzm.c
arm/kzm: use memdev for RAM
2020-02-19 16:49:55 +00:00
mainstone.c
hw/arm/mainstone: Simplify since the machines are little-endian only
2020-03-05 16:09:15 +00:00
Makefile.objs
hw/arm: add Xunlong Orange Pi PC machine
2020-03-12 16:27:33 +00:00
mcimx6ul-evk.c
arm/mcimx6ul-evk: use memdev for RAM
2020-02-19 16:49:55 +00:00
mcimx7d-sabre.c
arm/mcimx7d-sabre: use memdev for RAM
2020-02-19 16:49:55 +00:00
microbit.c
…
mps2-tz.c
arm/mps2-tz: use memdev for RAM
2020-02-19 16:49:55 +00:00
mps2.c
arm/mps2: use memdev for RAM
2020-02-19 16:49:55 +00:00
msf2-soc.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
msf2-som.c
…
musca.c
hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory
2019-10-24 20:10:27 +02:00
musicpal.c
hw/arm/musicpal: Simplify since the machines are little-endian only
2020-03-05 16:09:15 +00:00
netduino2.c
…
netduinoplus2.c
hw/arm: Add the Netduino Plus 2
2020-01-17 14:09:29 +00:00
nrf51_soc.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
nseries.c
arm/nseries: use memdev for RAM
2020-02-19 16:49:56 +00:00
omap1.c
omap-gpio: remove PROP_PTR
2020-01-07 17:24:29 +04:00
omap2.c
omap-gpio: remove PROP_PTR
2020-01-07 17:24:29 +04:00
omap_sx1.c
hw/arm/omap_sx1: Simplify since the machines are little-endian only
2020-03-05 16:09:15 +00:00
orangepi.c
hw/arm/allwinner-h3: add SDRAM controller device
2020-03-12 16:27:33 +00:00
palm.c
arm/palm: use memdev for RAM
2020-02-19 16:49:56 +00:00
pxa2xx_gpio.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
pxa2xx_pic.c
…
pxa2xx.c
hw/arm/pxa2xx: move timer_new from init() into realize() to avoid memleaks
2020-03-05 16:09:15 +00:00
raspi.c
arm/raspi: use memdev for RAM
2020-02-19 16:49:56 +00:00
realview.c
…
sabrelite.c
arm/sabrelite: use memdev for RAM
2020-02-19 16:49:56 +00:00
sbsa-ref.c
hw/arm: Use TYPE_PL011 to create serial port
2020-02-28 16:14:57 +00:00
smmu-common.c
hw/arm/smmu-common: Simplify smmu_find_smmu_pcibus() logic
2020-03-05 16:09:14 +00:00
smmu-internal.h
…
smmuv3-internal.h
hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macro
2019-12-20 14:03:00 +00:00
smmuv3.c
hw: Remove unnecessary cast when calling dma_memory_read()
2020-02-20 14:47:08 +01:00
spitz.c
hw/arm/spitz: move timer_new from init() into realize() to avoid memleaks
2020-03-05 16:09:16 +00:00
stellaris.c
stellaris: delay timer_new to avoid memleaks
2020-02-07 14:04:28 +00:00
stm32f205_soc.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
stm32f405_soc.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
strongarm.c
hw/arm/strongarm: move timer_new from init() into realize() to avoid memleaks
2020-03-05 16:09:16 +00:00
strongarm.h
hw/arm/collie: Create the RAM in the board
2019-10-22 17:44:01 +01:00
sysbus-fdt.c
hw/arm/virt: vTPM support
2020-03-05 12:18:16 -05:00
tosa.c
…
trace-events
…
versatilepb.c
arm/versatilepb: use memdev for RAM
2020-02-19 16:49:56 +00:00
vexpress.c
arm/vexpress: use memdev for RAM
2020-02-19 16:49:56 +00:00
virt-acpi-build.c
arm/acpi: simplify the description of PCI _CRS
2020-02-13 14:14:53 +00:00
virt.c
hw/arm/virt: kvm: allow gicv3 by default if v2 cannot work
2020-03-12 16:27:33 +00:00
xilinx_zynq.c
hw/arm/xilinx_zynq: Fix USB port instantiation
2020-02-28 16:14:57 +00:00
xlnx-versal-virt.c
hw/arm: versal: Generate xlnx-versal-virt zdma FDT nodes
2020-03-05 16:09:14 +00:00
xlnx-versal.c
hw/arm: versal: Add support for the LPD ADMAs
2020-03-05 16:09:13 +00:00
xlnx-zcu102.c
arm/xlnx-zcu102: use memdev for RAM
2020-02-19 16:49:57 +00:00
xlnx-zynqmp.c
qdev: set properties with device_class_set_props()
2020-01-24 20:59:15 +01:00
z2.c
hw/arm/z2: Simplify since the machines are little-endian only
2020-03-05 16:09:15 +00:00