mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
145e543eb3
qemu/hw/hppa/dino.c
Markus Armbruster d5938f29fe Clean up inclusion of sysemu/sysemu.h 
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Almost a third of its inclusions are actually superfluous.  Delete
them.  Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.

hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it.  The compiler is cool with that, but include it anyway.

This doesn't reduce actual use much, as it's still included into
widely included headers.  The next commit will tackle that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00

538 lines
15 KiB
C
Raw Blame History

/*
* HP-PARISC Dino PCI chipset emulation.
*
* (C) 2017 by Helge Deller <deller@gmx.de>
*
* This work is licensed under the GNU GPL license version 2 or later.
*
* Documentation available at:
* https://parisc.wiki.kernel.org/images-parisc/9/91/Dino_ers.pdf
* https://parisc.wiki.kernel.org/images-parisc/7/70/Dino_3_1_Errata.pdf
*/
#include "qemu/osdep.h"
#include "qemu/module.h"
#include "qemu/units.h"
#include "qapi/error.h"
#include "cpu.h"
#include "hw/irq.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_bus.h"
#include "migration/vmstate.h"
#include "hppa_sys.h"
#include "exec/address-spaces.h"
#define TYPE_DINO_PCI_HOST_BRIDGE "dino-pcihost"
#define DINO_IAR0 0x004
#define DINO_IODC 0x008
#define DINO_IRR0 0x00C /* RO */
#define DINO_IAR1 0x010
#define DINO_IRR1 0x014 /* RO */
#define DINO_IMR 0x018
#define DINO_IPR 0x01C
#define DINO_TOC_ADDR 0x020
#define DINO_ICR 0x024
#define DINO_ILR 0x028 /* RO */
#define DINO_IO_COMMAND 0x030 /* WO */
#define DINO_IO_STATUS 0x034 /* RO */
#define DINO_IO_CONTROL 0x038
#define DINO_IO_GSC_ERR_RESP 0x040 /* RO */
#define DINO_IO_ERR_INFO 0x044 /* RO */
#define DINO_IO_PCI_ERR_RESP 0x048 /* RO */
#define DINO_IO_FBB_EN 0x05c
#define DINO_IO_ADDR_EN 0x060
#define DINO_PCI_CONFIG_ADDR 0x064
#define DINO_PCI_CONFIG_DATA 0x068
#define DINO_PCI_IO_DATA 0x06c
#define DINO_PCI_MEM_DATA 0x070 /* Dino 3.x only */
#define DINO_GSC2X_CONFIG 0x7b4 /* RO */
#define DINO_GMASK 0x800
#define DINO_PAMR 0x804
#define DINO_PAPR 0x808
#define DINO_DAMODE 0x80c
#define DINO_PCICMD 0x810
#define DINO_PCISTS 0x814 /* R/WC */
#define DINO_MLTIM 0x81c
#define DINO_BRDG_FEAT 0x820
#define DINO_PCIROR 0x824
#define DINO_PCIWOR 0x828
#define DINO_TLTIM 0x830
#define DINO_IRQS 11 /* bits 0-10 are architected */
#define DINO_IRR_MASK 0x5ff /* only 10 bits are implemented */
#define DINO_LOCAL_IRQS (DINO_IRQS + 1)
#define DINO_MASK_IRQ(x) (1 << (x))
#define PCIINTA 0x001
#define PCIINTB 0x002
#define PCIINTC 0x004
#define PCIINTD 0x008
#define PCIINTE 0x010
#define PCIINTF 0x020
#define GSCEXTINT 0x040
/* #define xxx 0x080 - bit 7 is "default" */
/* #define xxx 0x100 - bit 8 not used */
/* #define xxx 0x200 - bit 9 not used */
#define RS232INT 0x400
#define DINO_MEM_CHUNK_SIZE (8 * MiB)
#define DINO_PCI_HOST_BRIDGE(obj) \
OBJECT_CHECK(DinoState, (obj), TYPE_DINO_PCI_HOST_BRIDGE)
typedef struct DinoState {
PCIHostState parent_obj;
/* PCI_CONFIG_ADDR is parent_obj.config_reg, via pci_host_conf_be_ops,
so that we can map PCI_CONFIG_DATA to pci_host_data_be_ops. */
uint32_t iar0;
uint32_t iar1;
uint32_t imr;
uint32_t ipr;
uint32_t icr;
uint32_t ilr;
uint32_t io_addr_en;
uint32_t io_control;
MemoryRegion this_mem;
MemoryRegion pci_mem;
MemoryRegion pci_mem_alias[32];
AddressSpace bm_as;
MemoryRegion bm;
MemoryRegion bm_ram_alias;
MemoryRegion bm_pci_alias;
MemoryRegion bm_cpu_alias;
MemoryRegion cpu0_eir_mem;
} DinoState;
/*
* Dino can forward memory accesses from the CPU in the range between
* 0xf0800000 and 0xff000000 to the PCI bus.
*/
static void gsc_to_pci_forwarding(DinoState *s)
{
uint32_t io_addr_en, tmp;
int enabled, i;
tmp = extract32(s->io_control, 7, 2);
enabled = (tmp == 0x01);
io_addr_en = s->io_addr_en;
memory_region_transaction_begin();
for (i = 1; i < 31; i++) {
MemoryRegion *mem = &s->pci_mem_alias[i];
if (enabled && (io_addr_en & (1U << i))) {
if (!memory_region_is_mapped(mem)) {
uint32_t addr = 0xf0000000 + i * DINO_MEM_CHUNK_SIZE;
memory_region_add_subregion(get_system_memory(), addr, mem);
}
} else if (memory_region_is_mapped(mem)) {
memory_region_del_subregion(get_system_memory(), mem);
}
}
memory_region_transaction_commit();
}
static bool dino_chip_mem_valid(void *opaque, hwaddr addr,
unsigned size, bool is_write,
MemTxAttrs attrs)
{
switch (addr) {
case DINO_IAR0:
case DINO_IAR1:
case DINO_IRR0:
case DINO_IRR1:
case DINO_IMR:
case DINO_IPR:
case DINO_ICR:
case DINO_ILR:
case DINO_IO_CONTROL:
case DINO_IO_ADDR_EN:
case DINO_PCI_IO_DATA:
return true;
case DINO_PCI_IO_DATA + 2:
return size <= 2;
case DINO_PCI_IO_DATA + 1:
case DINO_PCI_IO_DATA + 3:
return size == 1;
}
return false;
}
static MemTxResult dino_chip_read_with_attrs(void *opaque, hwaddr addr,
uint64_t *data, unsigned size,
MemTxAttrs attrs)
{
DinoState *s = opaque;
MemTxResult ret = MEMTX_OK;
AddressSpace *io;
uint16_t ioaddr;
uint32_t val;
switch (addr) {
case DINO_PCI_IO_DATA ... DINO_PCI_IO_DATA + 3:
/* Read from PCI IO space. */
io = &address_space_io;
ioaddr = s->parent_obj.config_reg + (addr & 3);
switch (size) {
case 1:
val = address_space_ldub(io, ioaddr, attrs, &ret);
break;
case 2:
val = address_space_lduw_be(io, ioaddr, attrs, &ret);
break;
case 4:
val = address_space_ldl_be(io, ioaddr, attrs, &ret);
break;
default:
g_assert_not_reached();
}
break;
case DINO_IO_ADDR_EN:
val = s->io_addr_en;
break;
case DINO_IO_CONTROL:
val = s->io_control;
break;
case DINO_IAR0:
val = s->iar0;
break;
case DINO_IAR1:
val = s->iar1;
break;
case DINO_IMR:
val = s->imr;
break;
case DINO_ICR:
val = s->icr;
break;
case DINO_IPR:
val = s->ipr;
/* Any read to IPR clears the register. */
s->ipr = 0;
break;
case DINO_ILR:
val = s->ilr;
break;
case DINO_IRR0:
val = s->ilr & s->imr & ~s->icr;
break;
case DINO_IRR1:
val = s->ilr & s->imr & s->icr;
break;
default:
/* Controlled by dino_chip_mem_valid above. */
g_assert_not_reached();
}
*data = val;
return ret;
}
static MemTxResult dino_chip_write_with_attrs(void *opaque, hwaddr addr,
uint64_t val, unsigned size,
MemTxAttrs attrs)
{
DinoState *s = opaque;
AddressSpace *io;
MemTxResult ret;
uint16_t ioaddr;
switch (addr) {
case DINO_IO_DATA ... DINO_PCI_IO_DATA + 3:
/* Write into PCI IO space. */
io = &address_space_io;
ioaddr = s->parent_obj.config_reg + (addr & 3);
switch (size) {
case 1:
address_space_stb(io, ioaddr, val, attrs, &ret);
break;
case 2:
address_space_stw_be(io, ioaddr, val, attrs, &ret);
break;
case 4:
address_space_stl_be(io, ioaddr, val, attrs, &ret);
break;
default:
g_assert_not_reached();
}
return ret;
case DINO_IO_ADDR_EN:
/* Never allow first (=firmware) and last (=Dino) areas. */
s->io_addr_en = val & 0x7ffffffe;
gsc_to_pci_forwarding(s);
break;
case DINO_IO_CONTROL:
s->io_control = val;
gsc_to_pci_forwarding(s);
break;
case DINO_IAR0:
s->iar0 = val;
break;
case DINO_IAR1:
s->iar1 = val;
break;
case DINO_IMR:
s->imr = val;
break;
case DINO_ICR:
s->icr = val;
break;
case DINO_IPR:
/* Any write to IPR clears the register. */
s->ipr = 0;
break;
case DINO_ILR:
case DINO_IRR0:
case DINO_IRR1:
/* These registers are read-only. */
break;
default:
/* Controlled by dino_chip_mem_valid above. */
g_assert_not_reached();
}
return MEMTX_OK;
}
static const MemoryRegionOps dino_chip_ops = {
.read_with_attrs = dino_chip_read_with_attrs,
.write_with_attrs = dino_chip_write_with_attrs,
.endianness = DEVICE_BIG_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 4,
.accepts = dino_chip_mem_valid,
},
.impl = {
.min_access_size = 1,
.max_access_size = 4,
},
};
static const VMStateDescription vmstate_dino = {
.name = "Dino",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(iar0, DinoState),
VMSTATE_UINT32(iar1, DinoState),
VMSTATE_UINT32(imr, DinoState),
VMSTATE_UINT32(ipr, DinoState),
VMSTATE_UINT32(icr, DinoState),
VMSTATE_UINT32(ilr, DinoState),
VMSTATE_UINT32(io_addr_en, DinoState),
VMSTATE_UINT32(io_control, DinoState),
VMSTATE_END_OF_LIST()
}
};
/* Unlike pci_config_data_le_ops, no check of high bit set in config_reg. */
static uint64_t dino_config_data_read(void *opaque, hwaddr addr, unsigned len)
{
PCIHostState *s = opaque;
return pci_data_read(s->bus, s->config_reg | (addr & 3), len);
}
static void dino_config_data_write(void *opaque, hwaddr addr,
uint64_t val, unsigned len)
{
PCIHostState *s = opaque;
pci_data_write(s->bus, s->config_reg | (addr & 3), val, len);
}
static const MemoryRegionOps dino_config_data_ops = {
.read = dino_config_data_read,
.write = dino_config_data_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static uint64_t dino_config_addr_read(void *opaque, hwaddr addr, unsigned len)
{
PCIHostState *s = opaque;
return s->config_reg;
}
static void dino_config_addr_write(void *opaque, hwaddr addr,
uint64_t val, unsigned len)
{
PCIHostState *s = opaque;
s->config_reg = val & ~3U;
}
static const MemoryRegionOps dino_config_addr_ops = {
.read = dino_config_addr_read,
.write = dino_config_addr_write,
.valid.min_access_size = 4,
.valid.max_access_size = 4,
.endianness = DEVICE_BIG_ENDIAN,
};
static AddressSpace *dino_pcihost_set_iommu(PCIBus *bus, void *opaque,
int devfn)
{
DinoState *s = opaque;
return &s->bm_as;
}
/*
* Dino interrupts are connected as shown on Page 78, Table 23
* (Little-endian bit numbers)
* 0 PCI INTA
* 1 PCI INTB
* 2 PCI INTC
* 3 PCI INTD
* 4 PCI INTE
* 5 PCI INTF
* 6 GSC External Interrupt
* 7 Bus Error for "less than fatal" mode
* 8 PS2
* 9 Unused
* 10 RS232
*/
static void dino_set_irq(void *opaque, int irq, int level)
{
DinoState *s = opaque;
uint32_t bit = 1u << irq;
uint32_t old_ilr = s->ilr;
if (level) {
uint32_t ena = bit & ~old_ilr;
s->ipr |= ena;
s->ilr = old_ilr | bit;
if (ena & s->imr) {
uint32_t iar = (ena & s->icr ? s->iar1 : s->iar0);
stl_be_phys(&address_space_memory, iar & -32, iar & 31);
}
} else {
s->ilr = old_ilr & ~bit;
}
}
static int dino_pci_map_irq(PCIDevice *d, int irq_num)
{
int slot = d->devfn >> 3;
assert(irq_num >= 0 && irq_num <= 3);
return slot & 0x03;
}
static void dino_set_timer_irq(void *opaque, int irq, int level)
{
/* ??? Not connected. */
}
static void dino_set_serial_irq(void *opaque, int irq, int level)
{
dino_set_irq(opaque, 10, level);
}
PCIBus *dino_init(MemoryRegion *addr_space,
qemu_irq *p_rtc_irq, qemu_irq *p_ser_irq)
{
DeviceState *dev;
DinoState *s;
PCIBus *b;
int i;
dev = qdev_create(NULL, TYPE_DINO_PCI_HOST_BRIDGE);
s = DINO_PCI_HOST_BRIDGE(dev);
/* Dino PCI access from main memory. */
memory_region_init_io(&s->this_mem, OBJECT(s), &dino_chip_ops,
s, "dino", 4096);
memory_region_add_subregion(addr_space, DINO_HPA, &s->this_mem);
/* Dino PCI config. */
memory_region_init_io(&s->parent_obj.conf_mem, OBJECT(&s->parent_obj),
&dino_config_addr_ops, dev, "pci-conf-idx", 4);
memory_region_init_io(&s->parent_obj.data_mem, OBJECT(&s->parent_obj),
&dino_config_data_ops, dev, "pci-conf-data", 4);
memory_region_add_subregion(&s->this_mem, DINO_PCI_CONFIG_ADDR,
&s->parent_obj.conf_mem);
memory_region_add_subregion(&s->this_mem, DINO_CONFIG_DATA,
&s->parent_obj.data_mem);
/* Dino PCI bus memory. */
memory_region_init(&s->pci_mem, OBJECT(s), "pci-memory", 1ull << 32);
b = pci_register_root_bus(dev, "pci", dino_set_irq, dino_pci_map_irq, s,
&s->pci_mem, get_system_io(),
PCI_DEVFN(0, 0), 32, TYPE_PCI_BUS);
s->parent_obj.bus = b;
qdev_init_nofail(dev);
/* Set up windows into PCI bus memory. */
for (i = 1; i < 31; i++) {
uint32_t addr = 0xf0000000 + i * DINO_MEM_CHUNK_SIZE;
char *name = g_strdup_printf("PCI Outbound Window %d", i);
memory_region_init_alias(&s->pci_mem_alias[i], OBJECT(s),
name, &s->pci_mem, addr,
DINO_MEM_CHUNK_SIZE);
}
/* Set up PCI view of memory: Bus master address space. */
memory_region_init(&s->bm, OBJECT(s), "bm-dino", 1ull << 32);
memory_region_init_alias(&s->bm_ram_alias, OBJECT(s),
"bm-system", addr_space, 0,
0xf0000000 + DINO_MEM_CHUNK_SIZE);
memory_region_init_alias(&s->bm_pci_alias, OBJECT(s),
"bm-pci", &s->pci_mem,
0xf0000000 + DINO_MEM_CHUNK_SIZE,
30 * DINO_MEM_CHUNK_SIZE);
memory_region_init_alias(&s->bm_cpu_alias, OBJECT(s),
"bm-cpu", addr_space, 0xfff00000,
0xfffff);
memory_region_add_subregion(&s->bm, 0,
&s->bm_ram_alias);
memory_region_add_subregion(&s->bm,
0xf0000000 + DINO_MEM_CHUNK_SIZE,
&s->bm_pci_alias);
memory_region_add_subregion(&s->bm, 0xfff00000,
&s->bm_cpu_alias);
address_space_init(&s->bm_as, &s->bm, "pci-bm");
pci_setup_iommu(b, dino_pcihost_set_iommu, s);
*p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
*p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
return b;
}
static void dino_pcihost_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->vmsd = &vmstate_dino;
}
static const TypeInfo dino_pcihost_info = {
.name = TYPE_DINO_PCI_HOST_BRIDGE,
.parent = TYPE_PCI_HOST_BRIDGE,
.instance_size = sizeof(DinoState),
.class_init = dino_pcihost_class_init,
};
static void dino_register_types(void)
{
type_register_static(&dino_pcihost_info);
}
type_init(dino_register_types)
Reference in New Issue View Git Blame Copy Permalink