mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
10f25a46c5
qemu/Makefile.target
Alexander Graf 5c145dacac PPC: E500: Add PV spinning code 
CPUs that are not the boot CPU need to run in spinning code to check if they
should run off to execute and if so where to jump to. This usually happens
by leaving secondary CPUs looping and checking if some variable in memory
changed.

In an environment like Qemu however we can be more clever. We can just export
the spin table the primary CPU modifies as MMIO region that would event based
wake up the respective secondary CPUs. That saves us quite some cycles while
the secondary CPUs are not up yet.

So this patch adds a PV device that simply exports the spinning table into the
guest and thus allows the primary CPU to wake up secondary ones.

Signed-off-by: Alexander Graf <agraf@suse.de>

---

v1 -> v2:

  - change into MMIO scheme
  - map the secondary NIP instead of 0 1:1
  - only map 64MB for TLB, same as u-boot
  - prepare code for 64-bit spinnings

v2 -> v3:

  - remove r6
  - set MAS2_M
  - map EA 0
  - use second TLB1 entry

v3 -> v4:

  - change to memoryops

v4 -> v5:

  - fix endianness bugs

v5 -> v6:

  - add header
2011-10-06 09:47:52 +02:00

437 lines
12 KiB
Makefile
Raw Blame History

# -*- Mode: makefile -*-
GENERATED_HEADERS = config-target.h
CONFIG_NO_PCI = $(if $(subst n,,$(CONFIG_PCI)),n,y)
CONFIG_NO_KVM = $(if $(subst n,,$(CONFIG_KVM)),n,y)
CONFIG_NO_XEN = $(if $(subst n,,$(CONFIG_XEN)),n,y)
include ../config-host.mak
include config-devices.mak
include config-target.mak
include $(SRC_PATH)/rules.mak
ifneq ($(HWDIR),)
include $(HWDIR)/config.mak
endif
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
$(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw)
ifdef CONFIG_LINUX
QEMU_CFLAGS += -I../linux-headers
endif
QEMU_CFLAGS += -I.. -I$(TARGET_PATH) -DNEED_CPU_H
include $(SRC_PATH)/Makefile.objs
ifdef CONFIG_USER_ONLY
# user emulator name
QEMU_PROG=qemu-$(TARGET_ARCH2)
else
# system emulator name
QEMU_PROG=qemu-system-$(TARGET_ARCH2)$(EXESUF)
endif
PROGS=$(QEMU_PROG)
STPFILES=
ifndef CONFIG_HAIKU
LIBS+=-lm
endif
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
else
TARGET_TYPE=system
endif
$(QEMU_PROG).stp:
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool \
--$(TRACE_BACKEND) \
--binary $(bindir)/$(QEMU_PROG) \
--target-arch $(TARGET_ARCH) \
--target-type $(TARGET_TYPE) \
--stap < $(SRC_PATH)/trace-events > $(QEMU_PROG).stp," GEN $(QEMU_PROG).stp")
else
stap:
endif
all: $(PROGS) stap
# Dummy command so that make thinks it has done something
@true
#########################################################
# cpu emulator library
libobj-y = exec.o translate-all.o cpu-exec.o translate.o
libobj-y += tcg/tcg.o tcg/optimize.o
libobj-y += fpu/softfloat.o
libobj-y += op_helper.o helper.o
ifeq ($(TARGET_BASE_ARCH), i386)
libobj-y += cpuid.o
endif
libobj-$(CONFIG_NEED_MMU) += mmu.o
libobj-$(TARGET_ARM) += neon_helper.o iwmmxt_helper.o
libobj-y += disas.o
$(libobj-y): $(GENERATED_HEADERS)
# libqemu
translate.o: translate.c cpu.h
translate-all.o: translate-all.c cpu.h
tcg/tcg.o: cpu.h
# HELPER_CFLAGS is used for all the code compiled with static register
# variables
op_helper.o user-exec.o: QEMU_CFLAGS += $(HELPER_CFLAGS)
# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in user-exec.c.
signal.o: QEMU_CFLAGS += $(HELPER_CFLAGS)
#########################################################
# Linux user emulator target
ifdef CONFIG_LINUX_USER
$(call set-vpath, $(SRC_PATH)/linux-user:$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR))
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) -I$(SRC_PATH)/linux-user
obj-y = main.o syscall.o strace.o mmap.o signal.o thunk.o \
elfload.o linuxload.o uaccess.o gdbstub.o cpu-uname.o \
user-exec.o $(oslib-obj-y)
obj-$(TARGET_HAS_BFLT) += flatload.o
obj-$(TARGET_I386) += vm86.o
obj-i386-y += ioport-user.o
nwfpe-obj-y = fpa11.o fpa11_cpdo.o fpa11_cpdt.o fpa11_cprt.o fpopcode.o
nwfpe-obj-y += single_cpdo.o double_cpdo.o extended_cpdo.o
obj-arm-y += $(addprefix nwfpe/, $(nwfpe-obj-y))
obj-arm-y += arm-semi.o
obj-m68k-y += m68k-sim.o m68k-semi.o
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
obj-y += $(addprefix ../libuser/, $(user-obj-y))
obj-y += $(addprefix ../libdis-user/, $(libdis-y))
obj-y += $(libobj-y)
endif #CONFIG_LINUX_USER
#########################################################
# Darwin user emulator target
ifdef CONFIG_DARWIN_USER
$(call set-vpath, $(SRC_PATH)/darwin-user)
QEMU_CFLAGS+=-I$(SRC_PATH)/darwin-user -I$(SRC_PATH)/darwin-user/$(TARGET_ARCH)
# Leave some space for the regular program loading zone
LDFLAGS+=-Wl,-segaddr,__STD_PROG_ZONE,0x1000 -image_base 0x0e000000
LIBS+=-lmx
obj-y = main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o \
gdbstub.o user-exec.o
obj-i386-y += ioport-user.o
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
obj-y += $(addprefix ../libuser/, $(user-obj-y))
obj-y += $(addprefix ../libdis-user/, $(libdis-y))
obj-y += $(libobj-y)
endif #CONFIG_DARWIN_USER
#########################################################
# BSD user emulator target
ifdef CONFIG_BSD_USER
$(call set-vpath, $(SRC_PATH)/bsd-user)
QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)
obj-y = main.o bsdload.o elfload.o mmap.o signal.o strace.o syscall.o \
gdbstub.o uaccess.o user-exec.o
obj-i386-y += ioport-user.o
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
obj-y += $(addprefix ../libuser/, $(user-obj-y))
obj-y += $(addprefix ../libdis-user/, $(libdis-y))
obj-y += $(libobj-y)
endif #CONFIG_BSD_USER
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
obj-y = arch_init.o cpus.o monitor.o machine.o gdbstub.o balloon.o
# virtio has to be here due to weird dependency between PCI and virtio-net.
# need to fix this properly
obj-$(CONFIG_NO_PCI) += pci-stub.o
obj-$(CONFIG_VIRTIO) += virtio.o virtio-blk.o virtio-balloon.o virtio-net.o virtio-serial-bus.o
obj-y += vhost_net.o
obj-$(CONFIG_VHOST_NET) += vhost.o
obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/virtio-9p-device.o
obj-$(CONFIG_KVM) += kvm.o kvm-all.o
obj-$(CONFIG_NO_KVM) += kvm-stub.o
obj-y += memory.o
LIBS+=-lz
QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
QEMU_CFLAGS += $(VNC_SASL_CFLAGS)
QEMU_CFLAGS += $(VNC_JPEG_CFLAGS)
QEMU_CFLAGS += $(VNC_PNG_CFLAGS)
QEMU_CFLAGS += $(GLIB_CFLAGS)
# xen support
obj-$(CONFIG_XEN) += xen-all.o xen_machine_pv.o xen_domainbuild.o xen-mapcache.o
obj-$(CONFIG_NO_XEN) += xen-stub.o
obj-i386-$(CONFIG_XEN) += xen_platform.o
# Inter-VM PCI shared memory
CONFIG_IVSHMEM =
ifeq ($(CONFIG_KVM), y)
ifeq ($(CONFIG_PCI), y)
CONFIG_IVSHMEM = y
endif
endif
obj-$(CONFIG_IVSHMEM) += ivshmem.o
# Hardware support
obj-i386-y += vga.o
obj-i386-y += mc146818rtc.o i8259.o pc.o
obj-i386-y += cirrus_vga.o sga.o apic.o ioapic.o piix_pci.o
obj-i386-y += vmport.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o
obj-i386-y += debugcon.o multiboot.o
obj-i386-y += pc_piix.o
obj-i386-$(CONFIG_KVM) += kvmclock.o
obj-i386-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o
# shared objects
obj-ppc-y = ppc.o
obj-ppc-y += vga.o
# PREP target
obj-ppc-y += i8259.o mc146818rtc.o
obj-ppc-y += ppc_prep.o
# OldWorld PowerMac
obj-ppc-y += ppc_oldworld.o
# NewWorld PowerMac
obj-ppc-y += ppc_newworld.o
# IBM pSeries (sPAPR)
ifeq ($(CONFIG_FDT)$(TARGET_PPC64),yy)
obj-ppc-y += spapr.o spapr_hcall.o spapr_rtas.o spapr_vio.o
obj-ppc-y += xics.o spapr_vty.o spapr_llan.o spapr_vscsi.o
endif
# PowerPC 4xx boards
obj-ppc-y += ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
obj-ppc-y += ppc440.o ppc440_bamboo.o
# PowerPC E500 boards
obj-ppc-y += ppce500_mpc8544ds.o mpc8544_guts.o ppce500_spin.o
# PowerPC 440 Xilinx ML507 reference board.
obj-ppc-y += virtex_ml507.o
obj-ppc-$(CONFIG_KVM) += kvm_ppc.o
obj-ppc-$(CONFIG_FDT) += device_tree.o
# PowerPC OpenPIC
obj-ppc-y += openpic.o
# Xilinx PPC peripherals
obj-ppc-y += xilinx_intc.o
obj-ppc-y += xilinx_timer.o
obj-ppc-y += xilinx_uartlite.o
obj-ppc-y += xilinx_ethlite.o
# LM32 boards
obj-lm32-y += lm32_boards.o
obj-lm32-y += milkymist.o
# LM32 peripherals
obj-lm32-y += lm32_pic.o
obj-lm32-y += lm32_juart.o
obj-lm32-y += lm32_timer.o
obj-lm32-y += lm32_uart.o
obj-lm32-y += lm32_sys.o
obj-lm32-y += milkymist-ac97.o
obj-lm32-y += milkymist-hpdmc.o
obj-lm32-y += milkymist-memcard.o
obj-lm32-y += milkymist-minimac2.o
obj-lm32-y += milkymist-pfpu.o
obj-lm32-y += milkymist-softusb.o
obj-lm32-y += milkymist-sysctl.o
obj-lm32-$(CONFIG_OPENGL) += milkymist-tmu2.o
obj-lm32-y += milkymist-uart.o
obj-lm32-y += milkymist-vgafb.o
obj-lm32-y += framebuffer.o
obj-mips-y = mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
obj-mips-y += mips_addr.o mips_timer.o mips_int.o
obj-mips-y += vga.o i8259.o
obj-mips-y += jazz_led.o
obj-mips-y += gt64xxx.o mc146818rtc.o
obj-mips-y += cirrus_vga.o
obj-mips-$(CONFIG_FULONG) += bonito.o vt82c686.o mips_fulong2e.o
obj-microblaze-y = petalogix_s3adsp1800_mmu.o
obj-microblaze-y += petalogix_ml605_mmu.o
obj-microblaze-y += microblaze_pic_cpu.o
obj-microblaze-y += xilinx_intc.o
obj-microblaze-y += xilinx_timer.o
obj-microblaze-y += xilinx_uartlite.o
obj-microblaze-y += xilinx_ethlite.o
obj-microblaze-y += xilinx_axidma.o
obj-microblaze-y += xilinx_axienet.o
obj-microblaze-$(CONFIG_FDT) += device_tree.o
# Boards
obj-cris-y = cris_pic_cpu.o
obj-cris-y += cris-boot.o
obj-cris-y += axis_dev88.o
# IO blocks
obj-cris-y += etraxfs_dma.o
obj-cris-y += etraxfs_pic.o
obj-cris-y += etraxfs_eth.o
obj-cris-y += etraxfs_timer.o
obj-cris-y += etraxfs_ser.o
ifeq ($(TARGET_ARCH), sparc64)
obj-sparc-y = sun4u.o apb_pci.o
obj-sparc-y += vga.o
obj-sparc-y += mc146818rtc.o
obj-sparc-y += cirrus_vga.o
else
obj-sparc-y = sun4m.o lance.o tcx.o sun4m_iommu.o slavio_intctl.o
obj-sparc-y += slavio_timer.o slavio_misc.o sparc32_dma.o
obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o leon3.o
# GRLIB
obj-sparc-y += grlib_gptimer.o grlib_irqmp.o grlib_apbuart.o
endif
obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o
obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
obj-arm-y += pl061.o
obj-arm-y += arm-semi.o
obj-arm-y += pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
obj-arm-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
obj-arm-y += gumstix.o
obj-arm-y += zaurus.o ide/microdrive.o spitz.o tosa.o tc6393xb.o
obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o \
omap_gpio.o omap_intc.o omap_uart.o
obj-arm-y += omap2.o omap_dss.o soc_dma.o omap_gptimer.o omap_synctimer.o \
omap_gpmc.o omap_sdrc.o omap_spi.o omap_tap.o omap_l4.o
obj-arm-y += omap_sx1.o palm.o tsc210x.o
obj-arm-y += nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
obj-arm-y += mst_fpga.o mainstone.o
obj-arm-y += z2.o
obj-arm-y += musicpal.o bitbang_i2c.o marvell_88w8618_audio.o
obj-arm-y += framebuffer.o
obj-arm-y += syborg.o syborg_fb.o syborg_interrupt.o syborg_keyboard.o
obj-arm-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o
obj-arm-y += syborg_virtio.o
obj-arm-y += vexpress.o
obj-arm-y += strongarm.o
obj-arm-y += collie.o
obj-sh4-y = shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
obj-sh4-y += sh_timer.o sh_serial.o sh_intc.o sh_pci.o sm501.o
obj-sh4-y += ide/mmio.o
obj-m68k-y = an5206.o mcf5206.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
obj-m68k-y += m68k-semi.o dummy_m68k.o
obj-s390x-y = s390-virtio-bus.o s390-virtio.o
obj-alpha-y = i8259.o mc146818rtc.o
obj-alpha-y += vga.o cirrus_vga.o
obj-xtensa-y += xtensa_pic.o
obj-xtensa-y += xtensa_sample.o
obj-xtensa-y += xtensa_dc232b.o
obj-xtensa-y += xtensa-semi.o
main.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
monitor.o: hmp-commands.h qmp-commands.h
$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS)
obj-y += $(addprefix ../, $(common-obj-y))
obj-y += $(addprefix ../libdis/, $(libdis-y))
obj-y += $(libobj-y)
obj-y += $(addprefix $(HWDIR)/, $(hw-obj-y))
obj-y += $(addprefix ../, $(trace-obj-y))
endif # CONFIG_SOFTMMU
ifndef CONFIG_LINUX_USER
ifndef CONFIG_BSD_USER
# libcacard needs qemu-thread support, and besides is only needed by devices
# so not requires with linux-user / bsd-user targets
obj-$(CONFIG_SMARTCARD_NSS) += $(addprefix ../libcacard/, $(libcacard-y))
endif # CONFIG_BSD_USER
endif # CONFIG_LINUX_USER
obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o
$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)
$(call LINK,$^)
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES)," GEN $(TARGET_DIR)$@")
hmp-commands.h: $(SRC_PATH)/hmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
qmp-commands.h: $(SRC_PATH)/qmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
clean:
rm -f *.o *.a *~ $(PROGS) nwfpe/*.o fpu/*.o
rm -f *.d */*.d tcg/*.o ide/*.o 9pfs/*.o
rm -f hmp-commands.h qmp-commands.h gdbstub-xml.c
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
install: all
ifneq ($(PROGS),)
$(INSTALL) -m 755 $(PROGS) "$(DESTDIR)$(bindir)"
ifneq ($(STRIP),)
$(STRIP) $(patsubst %,"$(DESTDIR)$(bindir)/%",$(PROGS))
endif
endif
ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp "$(DESTDIR)$(datadir)/../systemtap/tapset"
endif
# Include automatically generated dependency files
-include $(wildcard *.d */*.d)
Reference in New Issue View Git Blame Copy Permalink