273a70ae82
The AN536 is another FPGA image for the MPS3 development board. Unlike the existing FPGA images we already model, this board uses a Cortex-R family CPU, and it does not use any equivalent to the M-profile "Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c. It's therefore more convenient for us to model it as a completely separate C file. This commit adds the basic skeleton of the board model, and the code to create all the RAM and ROM. We assume that we're probably going to want to add more images in future, so use the same base class/subclass setup that mps2-tz.c uses, even though at the moment there's only a single subclass. Following commits will add the CPUs and the peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-9-peter.maydell@linaro.org
79 lines
4.7 KiB
Meson
79 lines
4.7 KiB
Meson
arm_ss = ss.source_set()
|
|
arm_ss.add(files('boot.c'), fdt)
|
|
arm_ss.add(when: 'CONFIG_ARM_VIRT', if_true: files('virt.c'))
|
|
arm_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c'))
|
|
arm_ss.add(when: 'CONFIG_DIGIC', if_true: files('digic_boards.c'))
|
|
arm_ss.add(when: 'CONFIG_EMCRAFT_SF2', if_true: files('msf2-som.c'))
|
|
arm_ss.add(when: 'CONFIG_HIGHBANK', if_true: files('highbank.c'))
|
|
arm_ss.add(when: 'CONFIG_INTEGRATOR', if_true: files('integratorcp.c'))
|
|
arm_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mainstone.c'))
|
|
arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c'))
|
|
arm_ss.add(when: 'CONFIG_MPS3R', if_true: files('mps3r.c'))
|
|
arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c'))
|
|
arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c'))
|
|
arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c'))
|
|
arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c'))
|
|
arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c'))
|
|
arm_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview.c'))
|
|
arm_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa-ref.c'))
|
|
arm_ss.add(when: 'CONFIG_STELLARIS', if_true: files('stellaris.c'))
|
|
arm_ss.add(when: 'CONFIG_STM32VLDISCOVERY', if_true: files('stm32vldiscovery.c'))
|
|
arm_ss.add(when: 'CONFIG_ZYNQ', if_true: files('xilinx_zynq.c'))
|
|
arm_ss.add(when: 'CONFIG_SABRELITE', if_true: files('sabrelite.c'))
|
|
|
|
arm_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m.c'))
|
|
arm_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210.c'))
|
|
arm_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx.c', 'pxa2xx_gpio.c', 'pxa2xx_pic.c'))
|
|
arm_ss.add(when: 'CONFIG_DIGIC', if_true: files('digic.c'))
|
|
arm_ss.add(when: 'CONFIG_OMAP', if_true: files('omap1.c'))
|
|
arm_ss.add(when: 'CONFIG_ALLWINNER_A10', if_true: files('allwinner-a10.c', 'cubieboard.c'))
|
|
arm_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3.c', 'orangepi.c'))
|
|
arm_ss.add(when: 'CONFIG_ALLWINNER_R40', if_true: files('allwinner-r40.c', 'bananapi_m2u.c'))
|
|
arm_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2836.c', 'raspi.c'))
|
|
arm_ss.add(when: 'CONFIG_STM32F100_SOC', if_true: files('stm32f100_soc.c'))
|
|
arm_ss.add(when: 'CONFIG_STM32F205_SOC', if_true: files('stm32f205_soc.c'))
|
|
arm_ss.add(when: 'CONFIG_STM32F405_SOC', if_true: files('stm32f405_soc.c'))
|
|
arm_ss.add(when: 'CONFIG_B_L475E_IOT01A', if_true: files('b-l475e-iot01a.c'))
|
|
arm_ss.add(when: 'CONFIG_STM32L4X5_SOC', if_true: files('stm32l4x5_soc.c'))
|
|
arm_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp.c', 'xlnx-zcu102.c'))
|
|
arm_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal.c', 'xlnx-versal-virt.c'))
|
|
arm_ss.add(when: 'CONFIG_FSL_IMX25', if_true: files('fsl-imx25.c', 'imx25_pdk.c'))
|
|
arm_ss.add(when: 'CONFIG_FSL_IMX31', if_true: files('fsl-imx31.c', 'kzm.c'))
|
|
arm_ss.add(when: 'CONFIG_FSL_IMX6', if_true: files('fsl-imx6.c'))
|
|
arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
|
|
'aspeed.c',
|
|
'aspeed_soc_common.c',
|
|
'aspeed_ast2400.c',
|
|
'aspeed_ast2600.c',
|
|
'aspeed_ast10x0.c',
|
|
'aspeed_eeprom.c',
|
|
'fby35.c'))
|
|
arm_ss.add(when: 'CONFIG_MPS2', if_true: files('mps2.c'))
|
|
arm_ss.add(when: 'CONFIG_MPS2', if_true: files('mps2-tz.c'))
|
|
arm_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-soc.c'))
|
|
arm_ss.add(when: 'CONFIG_MUSCA', if_true: files('musca.c'))
|
|
arm_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c'))
|
|
arm_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c'))
|
|
arm_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmuv3.c'))
|
|
arm_ss.add(when: 'CONFIG_FSL_IMX6UL', if_true: files('fsl-imx6ul.c', 'mcimx6ul-evk.c'))
|
|
arm_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_soc.c'))
|
|
arm_ss.add(when: 'CONFIG_XEN', if_true: files('xen_arm.c'))
|
|
|
|
system_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmu-common.c'))
|
|
system_ss.add(when: 'CONFIG_CHEETAH', if_true: files('palm.c'))
|
|
system_ss.add(when: 'CONFIG_COLLIE', if_true: files('collie.c'))
|
|
system_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4_boards.c'))
|
|
system_ss.add(when: 'CONFIG_GUMSTIX', if_true: files('gumstix.c'))
|
|
system_ss.add(when: 'CONFIG_NETDUINO2', if_true: files('netduino2.c'))
|
|
system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap2.c'))
|
|
system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_peripherals.c'))
|
|
system_ss.add(when: 'CONFIG_SPITZ', if_true: files('spitz.c'))
|
|
system_ss.add(when: 'CONFIG_STRONGARM', if_true: files('strongarm.c'))
|
|
system_ss.add(when: 'CONFIG_SX1', if_true: files('omap_sx1.c'))
|
|
system_ss.add(when: 'CONFIG_TOSA', if_true: files('tosa.c'))
|
|
system_ss.add(when: 'CONFIG_VERSATILE', if_true: files('versatilepb.c'))
|
|
system_ss.add(when: 'CONFIG_VEXPRESS', if_true: files('vexpress.c'))
|
|
system_ss.add(when: 'CONFIG_Z2', if_true: files('z2.c'))
|
|
|
|
hw_arch += {'arm': arm_ss}
|