mirrors/qemu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0d50d616fe
qemu/hw/mcf5206.c
Alexander Graf 2507c12ab0 Add endianness as io mem parameter 
As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.

This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:25 +00:00

542 lines
14 KiB
C
Raw Blame History

/*
* Motorola ColdFire MCF5206 SoC embedded peripheral emulation.
*
* Copyright (c) 2007 CodeSourcery.
*
* This code is licenced under the GPL
*/
#include "hw.h"
#include "mcf.h"
#include "qemu-timer.h"
#include "sysemu.h"
/* General purpose timer module. */
typedef struct {
uint16_t tmr;
uint16_t trr;
uint16_t tcr;
uint16_t ter;
ptimer_state *timer;
qemu_irq irq;
int irq_state;
} m5206_timer_state;
#define TMR_RST 0x01
#define TMR_CLK 0x06
#define TMR_FRR 0x08
#define TMR_ORI 0x10
#define TMR_OM 0x20
#define TMR_CE 0xc0
#define TER_CAP 0x01
#define TER_REF 0x02
static void m5206_timer_update(m5206_timer_state *s)
{
if ((s->tmr & TMR_ORI) != 0 && (s->ter & TER_REF))
qemu_irq_raise(s->irq);
else
qemu_irq_lower(s->irq);
}
static void m5206_timer_reset(m5206_timer_state *s)
{
s->tmr = 0;
s->trr = 0;
}
static void m5206_timer_recalibrate(m5206_timer_state *s)
{
int prescale;
int mode;
ptimer_stop(s->timer);
if ((s->tmr & TMR_RST) == 0)
return;
prescale = (s->tmr >> 8) + 1;
mode = (s->tmr >> 1) & 3;
if (mode == 2)
prescale *= 16;
if (mode == 3 || mode == 0)
hw_error("m5206_timer: mode %d not implemented\n", mode);
if ((s->tmr & TMR_FRR) == 0)
hw_error("m5206_timer: free running mode not implemented\n");
/* Assume 66MHz system clock. */
ptimer_set_freq(s->timer, 66000000 / prescale);
ptimer_set_limit(s->timer, s->trr, 0);
ptimer_run(s->timer, 0);
}
static void m5206_timer_trigger(void *opaque)
{
m5206_timer_state *s = (m5206_timer_state *)opaque;
s->ter |= TER_REF;
m5206_timer_update(s);
}
static uint32_t m5206_timer_read(m5206_timer_state *s, uint32_t addr)
{
switch (addr) {
case 0:
return s->tmr;
case 4:
return s->trr;
case 8:
return s->tcr;
case 0xc:
return s->trr - ptimer_get_count(s->timer);
case 0x11:
return s->ter;
default:
return 0;
}
}
static void m5206_timer_write(m5206_timer_state *s, uint32_t addr, uint32_t val)
{
switch (addr) {
case 0:
if ((s->tmr & TMR_RST) != 0 && (val & TMR_RST) == 0) {
m5206_timer_reset(s);
}
s->tmr = val;
m5206_timer_recalibrate(s);
break;
case 4:
s->trr = val;
m5206_timer_recalibrate(s);
break;
case 8:
s->tcr = val;
break;
case 0xc:
ptimer_set_count(s->timer, val);
break;
case 0x11:
s->ter &= ~val;
break;
default:
break;
}
m5206_timer_update(s);
}
static m5206_timer_state *m5206_timer_init(qemu_irq irq)
{
m5206_timer_state *s;
QEMUBH *bh;
s = (m5206_timer_state *)qemu_mallocz(sizeof(m5206_timer_state));
bh = qemu_bh_new(m5206_timer_trigger, s);
s->timer = ptimer_init(bh);
s->irq = irq;
m5206_timer_reset(s);
return s;
}
/* System Integration Module. */
typedef struct {
CPUState *env;
m5206_timer_state *timer[2];
void *uart[2];
uint8_t scr;
uint8_t icr[14];
uint16_t imr; /* 1 == interrupt is masked. */
uint16_t ipr;
uint8_t rsr;
uint8_t swivr;
uint8_t par;
/* Include the UART vector registers here. */
uint8_t uivr[2];
} m5206_mbar_state;
/* Interrupt controller. */
static int m5206_find_pending_irq(m5206_mbar_state *s)
{
int level;
int vector;
uint16_t active;
int i;
level = 0;
vector = 0;
active = s->ipr & ~s->imr;
if (!active)
return 0;
for (i = 1; i < 14; i++) {
if (active & (1 << i)) {
if ((s->icr[i] & 0x1f) > level) {
level = s->icr[i] & 0x1f;
vector = i;
}
}
}
if (level < 4)
vector = 0;
return vector;
}
static void m5206_mbar_update(m5206_mbar_state *s)
{
int irq;
int vector;
int level;
irq = m5206_find_pending_irq(s);
if (irq) {
int tmp;
tmp = s->icr[irq];
level = (tmp >> 2) & 7;
if (tmp & 0x80) {
/* Autovector. */
vector = 24 + level;
} else {
switch (irq) {
case 8: /* SWT */
vector = s->swivr;
break;
case 12: /* UART1 */
vector = s->uivr[0];
break;
case 13: /* UART2 */
vector = s->uivr[1];
break;
default:
/* Unknown vector. */
fprintf(stderr, "Unhandled vector for IRQ %d\n", irq);
vector = 0xf;
break;
}
}
} else {
level = 0;
vector = 0;
}
m68k_set_irq_level(s->env, level, vector);
}
static void m5206_mbar_set_irq(void *opaque, int irq, int level)
{
m5206_mbar_state *s = (m5206_mbar_state *)opaque;
if (level) {
s->ipr |= 1 << irq;
} else {
s->ipr &= ~(1 << irq);
}
m5206_mbar_update(s);
}
/* System Integration Module. */
static void m5206_mbar_reset(m5206_mbar_state *s)
{
s->scr = 0xc0;
s->icr[1] = 0x04;
s->icr[2] = 0x08;
s->icr[3] = 0x0c;
s->icr[4] = 0x10;
s->icr[5] = 0x14;
s->icr[6] = 0x18;
s->icr[7] = 0x1c;
s->icr[8] = 0x1c;
s->icr[9] = 0x80;
s->icr[10] = 0x80;
s->icr[11] = 0x80;
s->icr[12] = 0x00;
s->icr[13] = 0x00;
s->imr = 0x3ffe;
s->rsr = 0x80;
s->swivr = 0x0f;
s->par = 0;
}
static uint32_t m5206_mbar_read(m5206_mbar_state *s, uint32_t offset)
{
if (offset >= 0x100 && offset < 0x120) {
return m5206_timer_read(s->timer[0], offset - 0x100);
} else if (offset >= 0x120 && offset < 0x140) {
return m5206_timer_read(s->timer[1], offset - 0x120);
} else if (offset >= 0x140 && offset < 0x160) {
return mcf_uart_read(s->uart[0], offset - 0x140);
} else if (offset >= 0x180 && offset < 0x1a0) {
return mcf_uart_read(s->uart[1], offset - 0x180);
}
switch (offset) {
case 0x03: return s->scr;
case 0x14 ... 0x20: return s->icr[offset - 0x13];
case 0x36: return s->imr;
case 0x3a: return s->ipr;
case 0x40: return s->rsr;
case 0x41: return 0;
case 0x42: return s->swivr;
case 0x50:
/* DRAM mask register. */
/* FIXME: currently hardcoded to 128Mb. */
{
uint32_t mask = ~0;
while (mask > ram_size)
mask >>= 1;
return mask & 0x0ffe0000;
}
case 0x5c: return 1; /* DRAM bank 1 empty. */
case 0xcb: return s->par;
case 0x170: return s->uivr[0];
case 0x1b0: return s->uivr[1];
}
hw_error("Bad MBAR read offset 0x%x", (int)offset);
return 0;
}
static void m5206_mbar_write(m5206_mbar_state *s, uint32_t offset,
uint32_t value)
{
if (offset >= 0x100 && offset < 0x120) {
m5206_timer_write(s->timer[0], offset - 0x100, value);
return;
} else if (offset >= 0x120 && offset < 0x140) {
m5206_timer_write(s->timer[1], offset - 0x120, value);
return;
} else if (offset >= 0x140 && offset < 0x160) {
mcf_uart_write(s->uart[0], offset - 0x140, value);
return;
} else if (offset >= 0x180 && offset < 0x1a0) {
mcf_uart_write(s->uart[1], offset - 0x180, value);
return;
}
switch (offset) {
case 0x03:
s->scr = value;
break;
case 0x14 ... 0x20:
s->icr[offset - 0x13] = value;
m5206_mbar_update(s);
break;
case 0x36:
s->imr = value;
m5206_mbar_update(s);
break;
case 0x40:
s->rsr &= ~value;
break;
case 0x41:
/* TODO: implement watchdog. */
break;
case 0x42:
s->swivr = value;
break;
case 0xcb:
s->par = value;
break;
case 0x170:
s->uivr[0] = value;
break;
case 0x178: case 0x17c: case 0x1c8: case 0x1bc:
/* Not implemented: UART Output port bits. */
break;
case 0x1b0:
s->uivr[1] = value;
break;
default:
hw_error("Bad MBAR write offset 0x%x", (int)offset);
break;
}
}
/* Internal peripherals use a variety of register widths.
This lookup table allows a single routine to handle all of them. */
static const int m5206_mbar_width[] =
{
/* 000-040 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2,
/* 040-080 */ 1, 2, 2, 2, 4, 1, 2, 4, 1, 2, 4, 2, 2, 4, 2, 2,
/* 080-0c0 */ 4, 2, 2, 4, 2, 2, 4, 2, 2, 4, 2, 2, 4, 2, 2, 4,
/* 0c0-100 */ 2, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/* 100-140 */ 2, 2, 2, 2, 1, 0, 0, 0, 2, 2, 2, 2, 1, 0, 0, 0,
/* 140-180 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
/* 180-1c0 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
/* 1c0-200 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
};
static uint32_t m5206_mbar_readw(void *opaque, target_phys_addr_t offset);
static uint32_t m5206_mbar_readl(void *opaque, target_phys_addr_t offset);
static uint32_t m5206_mbar_readb(void *opaque, target_phys_addr_t offset)
{
m5206_mbar_state *s = (m5206_mbar_state *)opaque;
offset &= 0x3ff;
if (offset > 0x200) {
hw_error("Bad MBAR read offset 0x%x", (int)offset);
}
if (m5206_mbar_width[offset >> 2] > 1) {
uint16_t val;
val = m5206_mbar_readw(opaque, offset & ~1);
if ((offset & 1) == 0) {
val >>= 8;
}
return val & 0xff;
}
return m5206_mbar_read(s, offset);
}
static uint32_t m5206_mbar_readw(void *opaque, target_phys_addr_t offset)
{
m5206_mbar_state *s = (m5206_mbar_state *)opaque;
int width;
offset &= 0x3ff;
if (offset > 0x200) {
hw_error("Bad MBAR read offset 0x%x", (int)offset);
}
width = m5206_mbar_width[offset >> 2];
if (width > 2) {
uint32_t val;
val = m5206_mbar_readl(opaque, offset & ~3);
if ((offset & 3) == 0)
val >>= 16;
return val & 0xffff;
} else if (width < 2) {
uint16_t val;
val = m5206_mbar_readb(opaque, offset) << 8;
val |= m5206_mbar_readb(opaque, offset + 1);
return val;
}
return m5206_mbar_read(s, offset);
}
static uint32_t m5206_mbar_readl(void *opaque, target_phys_addr_t offset)
{
m5206_mbar_state *s = (m5206_mbar_state *)opaque;
int width;
offset &= 0x3ff;
if (offset > 0x200) {
hw_error("Bad MBAR read offset 0x%x", (int)offset);
}
width = m5206_mbar_width[offset >> 2];
if (width < 4) {
uint32_t val;
val = m5206_mbar_readw(opaque, offset) << 16;
val |= m5206_mbar_readw(opaque, offset + 2);
return val;
}
return m5206_mbar_read(s, offset);
}
static void m5206_mbar_writew(void *opaque, target_phys_addr_t offset,
uint32_t value);
static void m5206_mbar_writel(void *opaque, target_phys_addr_t offset,
uint32_t value);
static void m5206_mbar_writeb(void *opaque, target_phys_addr_t offset,
uint32_t value)
{
m5206_mbar_state *s = (m5206_mbar_state *)opaque;
int width;
offset &= 0x3ff;
if (offset > 0x200) {
hw_error("Bad MBAR write offset 0x%x", (int)offset);
}
width = m5206_mbar_width[offset >> 2];
if (width > 1) {
uint32_t tmp;
tmp = m5206_mbar_readw(opaque, offset & ~1);
if (offset & 1) {
tmp = (tmp & 0xff00) | value;
} else {
tmp = (tmp & 0x00ff) | (value << 8);
}
m5206_mbar_writew(opaque, offset & ~1, tmp);
return;
}
m5206_mbar_write(s, offset, value);
}
static void m5206_mbar_writew(void *opaque, target_phys_addr_t offset,
uint32_t value)
{
m5206_mbar_state *s = (m5206_mbar_state *)opaque;
int width;
offset &= 0x3ff;
if (offset > 0x200) {
hw_error("Bad MBAR write offset 0x%x", (int)offset);
}
width = m5206_mbar_width[offset >> 2];
if (width > 2) {
uint32_t tmp;
tmp = m5206_mbar_readl(opaque, offset & ~3);
if (offset & 3) {
tmp = (tmp & 0xffff0000) | value;
} else {
tmp = (tmp & 0x0000ffff) | (value << 16);
}
m5206_mbar_writel(opaque, offset & ~3, tmp);
return;
} else if (width < 2) {
m5206_mbar_writeb(opaque, offset, value >> 8);
m5206_mbar_writeb(opaque, offset + 1, value & 0xff);
return;
}
m5206_mbar_write(s, offset, value);
}
static void m5206_mbar_writel(void *opaque, target_phys_addr_t offset,
uint32_t value)
{
m5206_mbar_state *s = (m5206_mbar_state *)opaque;
int width;
offset &= 0x3ff;
if (offset > 0x200) {
hw_error("Bad MBAR write offset 0x%x", (int)offset);
}
width = m5206_mbar_width[offset >> 2];
if (width < 4) {
m5206_mbar_writew(opaque, offset, value >> 16);
m5206_mbar_writew(opaque, offset + 2, value & 0xffff);
return;
}
m5206_mbar_write(s, offset, value);
}
static CPUReadMemoryFunc * const m5206_mbar_readfn[] = {
m5206_mbar_readb,
m5206_mbar_readw,
m5206_mbar_readl
};
static CPUWriteMemoryFunc * const m5206_mbar_writefn[] = {
m5206_mbar_writeb,
m5206_mbar_writew,
m5206_mbar_writel
};
qemu_irq *mcf5206_init(uint32_t base, CPUState *env)
{
m5206_mbar_state *s;
qemu_irq *pic;
int iomemtype;
s = (m5206_mbar_state *)qemu_mallocz(sizeof(m5206_mbar_state));
iomemtype = cpu_register_io_memory(m5206_mbar_readfn,
m5206_mbar_writefn, s,
DEVICE_NATIVE_ENDIAN);
cpu_register_physical_memory(base, 0x00001000, iomemtype);
pic = qemu_allocate_irqs(m5206_mbar_set_irq, s, 14);
s->timer[0] = m5206_timer_init(pic[9]);
s->timer[1] = m5206_timer_init(pic[10]);
s->uart[0] = mcf_uart_init(pic[12], serial_hds[0]);
s->uart[1] = mcf_uart_init(pic[13], serial_hds[1]);
s->env = env;
m5206_mbar_reset(s);
return pic;
}
Reference in New Issue View Git Blame Copy Permalink