5c0139a8c2
Currently we set the initial isolation/allocation state for DRCs associated with coldplugged LMBs to ISOLATED/UNUSABLE, respectively, under the assumption that the guest will move this state to UNISOLATED/USABLE. In fact, this is only the case for LMBs added via hotplug. For coldplugged LMBs, the guest actually assumes the initial state to be UNISOLATED/USABLE. In practice, this only becomes an issue when we attempt to unplug one of these LMBs, where the guest kernel will issue an rtas-get-sensor-state call to check that the corresponding DRC is in an USABLE state before it will release the LMB back to QEMU. If the returned state is otherwise, the guest will assume no further action is needed, which bypasses the QEMU-side cleanup that occurs during the USABLE->UNUSABLE transition. This results in LMBs and their corresponding pc-dimm devices to stick around indefinitely. This patch fixes the issue by manually setting DRCs associated with cold-plugged LMBs to UNISOLATED/ALLOCATED, but leaving the hotplug state untouched. As it turns out, this is analogous to the handling for cold-plugged CPUs in spapr_core_plug(). Cc: qemu-ppc@nongnu.org Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
3005 lines
96 KiB
C
3005 lines
96 KiB
C
/*
|
|
* QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
|
|
*
|
|
* Copyright (c) 2004-2007 Fabrice Bellard
|
|
* Copyright (c) 2007 Jocelyn Mayer
|
|
* Copyright (c) 2010 David Gibson, IBM Corporation.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*
|
|
*/
|
|
#include "qemu/osdep.h"
|
|
#include "qapi/error.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "sysemu/numa.h"
|
|
#include "hw/hw.h"
|
|
#include "qemu/log.h"
|
|
#include "hw/fw-path-provider.h"
|
|
#include "elf.h"
|
|
#include "net/net.h"
|
|
#include "sysemu/device_tree.h"
|
|
#include "sysemu/block-backend.h"
|
|
#include "sysemu/cpus.h"
|
|
#include "sysemu/kvm.h"
|
|
#include "kvm_ppc.h"
|
|
#include "migration/migration.h"
|
|
#include "mmu-hash64.h"
|
|
#include "qom/cpu.h"
|
|
|
|
#include "hw/boards.h"
|
|
#include "hw/ppc/ppc.h"
|
|
#include "hw/loader.h"
|
|
|
|
#include "hw/ppc/fdt.h"
|
|
#include "hw/ppc/spapr.h"
|
|
#include "hw/ppc/spapr_vio.h"
|
|
#include "hw/pci-host/spapr.h"
|
|
#include "hw/ppc/xics.h"
|
|
#include "hw/pci/msi.h"
|
|
|
|
#include "hw/pci/pci.h"
|
|
#include "hw/scsi/scsi.h"
|
|
#include "hw/virtio/virtio-scsi.h"
|
|
|
|
#include "exec/address-spaces.h"
|
|
#include "hw/usb.h"
|
|
#include "qemu/config-file.h"
|
|
#include "qemu/error-report.h"
|
|
#include "trace.h"
|
|
#include "hw/nmi.h"
|
|
|
|
#include "hw/compat.h"
|
|
#include "qemu/cutils.h"
|
|
#include "hw/ppc/spapr_cpu_core.h"
|
|
#include "qmp-commands.h"
|
|
|
|
#include <libfdt.h>
|
|
|
|
/* SLOF memory layout:
|
|
*
|
|
* SLOF raw image loaded at 0, copies its romfs right below the flat
|
|
* device-tree, then position SLOF itself 31M below that
|
|
*
|
|
* So we set FW_OVERHEAD to 40MB which should account for all of that
|
|
* and more
|
|
*
|
|
* We load our kernel at 4M, leaving space for SLOF initial image
|
|
*/
|
|
#define FDT_MAX_SIZE 0x100000
|
|
#define RTAS_MAX_SIZE 0x10000
|
|
#define RTAS_MAX_ADDR 0x80000000 /* RTAS must stay below that */
|
|
#define FW_MAX_SIZE 0x400000
|
|
#define FW_FILE_NAME "slof.bin"
|
|
#define FW_OVERHEAD 0x2800000
|
|
#define KERNEL_LOAD_ADDR FW_MAX_SIZE
|
|
|
|
#define MIN_RMA_SLOF 128UL
|
|
|
|
#define PHANDLE_XICP 0x00001111
|
|
|
|
#define HTAB_SIZE(spapr) (1ULL << ((spapr)->htab_shift))
|
|
|
|
static XICSState *try_create_xics(const char *type, int nr_servers,
|
|
int nr_irqs, Error **errp)
|
|
{
|
|
Error *err = NULL;
|
|
DeviceState *dev;
|
|
|
|
dev = qdev_create(NULL, type);
|
|
qdev_prop_set_uint32(dev, "nr_servers", nr_servers);
|
|
qdev_prop_set_uint32(dev, "nr_irqs", nr_irqs);
|
|
object_property_set_bool(OBJECT(dev), true, "realized", &err);
|
|
if (err) {
|
|
error_propagate(errp, err);
|
|
object_unparent(OBJECT(dev));
|
|
return NULL;
|
|
}
|
|
return XICS_COMMON(dev);
|
|
}
|
|
|
|
static XICSState *xics_system_init(MachineState *machine,
|
|
int nr_servers, int nr_irqs, Error **errp)
|
|
{
|
|
XICSState *xics = NULL;
|
|
|
|
if (kvm_enabled()) {
|
|
Error *err = NULL;
|
|
|
|
if (machine_kernel_irqchip_allowed(machine)) {
|
|
xics = try_create_xics(TYPE_XICS_SPAPR_KVM, nr_servers, nr_irqs,
|
|
&err);
|
|
}
|
|
if (machine_kernel_irqchip_required(machine) && !xics) {
|
|
error_reportf_err(err,
|
|
"kernel_irqchip requested but unavailable: ");
|
|
} else {
|
|
error_free(err);
|
|
}
|
|
}
|
|
|
|
if (!xics) {
|
|
xics = try_create_xics(TYPE_XICS_SPAPR, nr_servers, nr_irqs, errp);
|
|
}
|
|
|
|
return xics;
|
|
}
|
|
|
|
static int spapr_fixup_cpu_smt_dt(void *fdt, int offset, PowerPCCPU *cpu,
|
|
int smt_threads)
|
|
{
|
|
int i, ret = 0;
|
|
uint32_t servers_prop[smt_threads];
|
|
uint32_t gservers_prop[smt_threads * 2];
|
|
int index = ppc_get_vcpu_dt_id(cpu);
|
|
|
|
if (cpu->cpu_version) {
|
|
ret = fdt_setprop_cell(fdt, offset, "cpu-version", cpu->cpu_version);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Build interrupt servers and gservers properties */
|
|
for (i = 0; i < smt_threads; i++) {
|
|
servers_prop[i] = cpu_to_be32(index + i);
|
|
/* Hack, direct the group queues back to cpu 0 */
|
|
gservers_prop[i*2] = cpu_to_be32(index + i);
|
|
gservers_prop[i*2 + 1] = 0;
|
|
}
|
|
ret = fdt_setprop(fdt, offset, "ibm,ppc-interrupt-server#s",
|
|
servers_prop, sizeof(servers_prop));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
ret = fdt_setprop(fdt, offset, "ibm,ppc-interrupt-gserver#s",
|
|
gservers_prop, sizeof(gservers_prop));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int spapr_fixup_cpu_numa_dt(void *fdt, int offset, CPUState *cs)
|
|
{
|
|
int ret = 0;
|
|
PowerPCCPU *cpu = POWERPC_CPU(cs);
|
|
int index = ppc_get_vcpu_dt_id(cpu);
|
|
uint32_t associativity[] = {cpu_to_be32(0x5),
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(cs->numa_node),
|
|
cpu_to_be32(index)};
|
|
|
|
/* Advertise NUMA via ibm,associativity */
|
|
if (nb_numa_nodes > 1) {
|
|
ret = fdt_setprop(fdt, offset, "ibm,associativity", associativity,
|
|
sizeof(associativity));
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int spapr_fixup_cpu_dt(void *fdt, sPAPRMachineState *spapr)
|
|
{
|
|
int ret = 0, offset, cpus_offset;
|
|
CPUState *cs;
|
|
char cpu_model[32];
|
|
int smt = kvmppc_smt_threads();
|
|
uint32_t pft_size_prop[] = {0, cpu_to_be32(spapr->htab_shift)};
|
|
|
|
CPU_FOREACH(cs) {
|
|
PowerPCCPU *cpu = POWERPC_CPU(cs);
|
|
DeviceClass *dc = DEVICE_GET_CLASS(cs);
|
|
int index = ppc_get_vcpu_dt_id(cpu);
|
|
|
|
if ((index % smt) != 0) {
|
|
continue;
|
|
}
|
|
|
|
snprintf(cpu_model, 32, "%s@%x", dc->fw_name, index);
|
|
|
|
cpus_offset = fdt_path_offset(fdt, "/cpus");
|
|
if (cpus_offset < 0) {
|
|
cpus_offset = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"),
|
|
"cpus");
|
|
if (cpus_offset < 0) {
|
|
return cpus_offset;
|
|
}
|
|
}
|
|
offset = fdt_subnode_offset(fdt, cpus_offset, cpu_model);
|
|
if (offset < 0) {
|
|
offset = fdt_add_subnode(fdt, cpus_offset, cpu_model);
|
|
if (offset < 0) {
|
|
return offset;
|
|
}
|
|
}
|
|
|
|
ret = fdt_setprop(fdt, offset, "ibm,pft-size",
|
|
pft_size_prop, sizeof(pft_size_prop));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = spapr_fixup_cpu_numa_dt(fdt, offset, cs);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = spapr_fixup_cpu_smt_dt(fdt, offset, cpu,
|
|
ppc_get_compat_smt_threads(cpu));
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static hwaddr spapr_node0_size(void)
|
|
{
|
|
MachineState *machine = MACHINE(qdev_get_machine());
|
|
|
|
if (nb_numa_nodes) {
|
|
int i;
|
|
for (i = 0; i < nb_numa_nodes; ++i) {
|
|
if (numa_info[i].node_mem) {
|
|
return MIN(pow2floor(numa_info[i].node_mem),
|
|
machine->ram_size);
|
|
}
|
|
}
|
|
}
|
|
return machine->ram_size;
|
|
}
|
|
|
|
static void add_str(GString *s, const gchar *s1)
|
|
{
|
|
g_string_append_len(s, s1, strlen(s1) + 1);
|
|
}
|
|
|
|
static int spapr_populate_memory_node(void *fdt, int nodeid, hwaddr start,
|
|
hwaddr size)
|
|
{
|
|
uint32_t associativity[] = {
|
|
cpu_to_be32(0x4), /* length */
|
|
cpu_to_be32(0x0), cpu_to_be32(0x0),
|
|
cpu_to_be32(0x0), cpu_to_be32(nodeid)
|
|
};
|
|
char mem_name[32];
|
|
uint64_t mem_reg_property[2];
|
|
int off;
|
|
|
|
mem_reg_property[0] = cpu_to_be64(start);
|
|
mem_reg_property[1] = cpu_to_be64(size);
|
|
|
|
sprintf(mem_name, "memory@" TARGET_FMT_lx, start);
|
|
off = fdt_add_subnode(fdt, 0, mem_name);
|
|
_FDT(off);
|
|
_FDT((fdt_setprop_string(fdt, off, "device_type", "memory")));
|
|
_FDT((fdt_setprop(fdt, off, "reg", mem_reg_property,
|
|
sizeof(mem_reg_property))));
|
|
_FDT((fdt_setprop(fdt, off, "ibm,associativity", associativity,
|
|
sizeof(associativity))));
|
|
return off;
|
|
}
|
|
|
|
static int spapr_populate_memory(sPAPRMachineState *spapr, void *fdt)
|
|
{
|
|
MachineState *machine = MACHINE(spapr);
|
|
hwaddr mem_start, node_size;
|
|
int i, nb_nodes = nb_numa_nodes;
|
|
NodeInfo *nodes = numa_info;
|
|
NodeInfo ramnode;
|
|
|
|
/* No NUMA nodes, assume there is just one node with whole RAM */
|
|
if (!nb_numa_nodes) {
|
|
nb_nodes = 1;
|
|
ramnode.node_mem = machine->ram_size;
|
|
nodes = &ramnode;
|
|
}
|
|
|
|
for (i = 0, mem_start = 0; i < nb_nodes; ++i) {
|
|
if (!nodes[i].node_mem) {
|
|
continue;
|
|
}
|
|
if (mem_start >= machine->ram_size) {
|
|
node_size = 0;
|
|
} else {
|
|
node_size = nodes[i].node_mem;
|
|
if (node_size > machine->ram_size - mem_start) {
|
|
node_size = machine->ram_size - mem_start;
|
|
}
|
|
}
|
|
if (!mem_start) {
|
|
/* ppc_spapr_init() checks for rma_size <= node0_size already */
|
|
spapr_populate_memory_node(fdt, i, 0, spapr->rma_size);
|
|
mem_start += spapr->rma_size;
|
|
node_size -= spapr->rma_size;
|
|
}
|
|
for ( ; node_size; ) {
|
|
hwaddr sizetmp = pow2floor(node_size);
|
|
|
|
/* mem_start != 0 here */
|
|
if (ctzl(mem_start) < ctzl(sizetmp)) {
|
|
sizetmp = 1ULL << ctzl(mem_start);
|
|
}
|
|
|
|
spapr_populate_memory_node(fdt, i, mem_start, sizetmp);
|
|
node_size -= sizetmp;
|
|
mem_start += sizetmp;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Populate the "ibm,pa-features" property */
|
|
static void spapr_populate_pa_features(CPUPPCState *env, void *fdt, int offset)
|
|
{
|
|
uint8_t pa_features_206[] = { 6, 0,
|
|
0xf6, 0x1f, 0xc7, 0x00, 0x80, 0xc0 };
|
|
uint8_t pa_features_207[] = { 24, 0,
|
|
0xf6, 0x1f, 0xc7, 0xc0, 0x80, 0xf0,
|
|
0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
|
|
0x80, 0x00, 0x80, 0x00, 0x00, 0x00 };
|
|
uint8_t *pa_features;
|
|
size_t pa_size;
|
|
|
|
switch (env->mmu_model) {
|
|
case POWERPC_MMU_2_06:
|
|
case POWERPC_MMU_2_06a:
|
|
pa_features = pa_features_206;
|
|
pa_size = sizeof(pa_features_206);
|
|
break;
|
|
case POWERPC_MMU_2_07:
|
|
case POWERPC_MMU_2_07a:
|
|
pa_features = pa_features_207;
|
|
pa_size = sizeof(pa_features_207);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
if (env->ci_large_pages) {
|
|
/*
|
|
* Note: we keep CI large pages off by default because a 64K capable
|
|
* guest provisioned with large pages might otherwise try to map a qemu
|
|
* framebuffer (or other kind of memory mapped PCI BAR) using 64K pages
|
|
* even if that qemu runs on a 4k host.
|
|
* We dd this bit back here if we are confident this is not an issue
|
|
*/
|
|
pa_features[3] |= 0x20;
|
|
}
|
|
if (kvmppc_has_cap_htm() && pa_size > 24) {
|
|
pa_features[24] |= 0x80; /* Transactional memory support */
|
|
}
|
|
|
|
_FDT((fdt_setprop(fdt, offset, "ibm,pa-features", pa_features, pa_size)));
|
|
}
|
|
|
|
static void spapr_populate_cpu_dt(CPUState *cs, void *fdt, int offset,
|
|
sPAPRMachineState *spapr)
|
|
{
|
|
PowerPCCPU *cpu = POWERPC_CPU(cs);
|
|
CPUPPCState *env = &cpu->env;
|
|
PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cs);
|
|
int index = ppc_get_vcpu_dt_id(cpu);
|
|
uint32_t segs[] = {cpu_to_be32(28), cpu_to_be32(40),
|
|
0xffffffff, 0xffffffff};
|
|
uint32_t tbfreq = kvm_enabled() ? kvmppc_get_tbfreq()
|
|
: SPAPR_TIMEBASE_FREQ;
|
|
uint32_t cpufreq = kvm_enabled() ? kvmppc_get_clockfreq() : 1000000000;
|
|
uint32_t page_sizes_prop[64];
|
|
size_t page_sizes_prop_size;
|
|
uint32_t vcpus_per_socket = smp_threads * smp_cores;
|
|
uint32_t pft_size_prop[] = {0, cpu_to_be32(spapr->htab_shift)};
|
|
sPAPRDRConnector *drc;
|
|
sPAPRDRConnectorClass *drck;
|
|
int drc_index;
|
|
|
|
drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_CPU, index);
|
|
if (drc) {
|
|
drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
|
|
drc_index = drck->get_index(drc);
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,my-drc-index", drc_index)));
|
|
}
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "reg", index)));
|
|
_FDT((fdt_setprop_string(fdt, offset, "device_type", "cpu")));
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "cpu-version", env->spr[SPR_PVR])));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "d-cache-block-size",
|
|
env->dcache_line_size)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "d-cache-line-size",
|
|
env->dcache_line_size)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "i-cache-block-size",
|
|
env->icache_line_size)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "i-cache-line-size",
|
|
env->icache_line_size)));
|
|
|
|
if (pcc->l1_dcache_size) {
|
|
_FDT((fdt_setprop_cell(fdt, offset, "d-cache-size",
|
|
pcc->l1_dcache_size)));
|
|
} else {
|
|
error_report("Warning: Unknown L1 dcache size for cpu");
|
|
}
|
|
if (pcc->l1_icache_size) {
|
|
_FDT((fdt_setprop_cell(fdt, offset, "i-cache-size",
|
|
pcc->l1_icache_size)));
|
|
} else {
|
|
error_report("Warning: Unknown L1 icache size for cpu");
|
|
}
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "timebase-frequency", tbfreq)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "clock-frequency", cpufreq)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "slb-size", env->slb_nr)));
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,slb-size", env->slb_nr)));
|
|
_FDT((fdt_setprop_string(fdt, offset, "status", "okay")));
|
|
_FDT((fdt_setprop(fdt, offset, "64-bit", NULL, 0)));
|
|
|
|
if (env->spr_cb[SPR_PURR].oea_read) {
|
|
_FDT((fdt_setprop(fdt, offset, "ibm,purr", NULL, 0)));
|
|
}
|
|
|
|
if (env->mmu_model & POWERPC_MMU_1TSEG) {
|
|
_FDT((fdt_setprop(fdt, offset, "ibm,processor-segment-sizes",
|
|
segs, sizeof(segs))));
|
|
}
|
|
|
|
/* Advertise VMX/VSX (vector extensions) if available
|
|
* 0 / no property == no vector extensions
|
|
* 1 == VMX / Altivec available
|
|
* 2 == VSX available */
|
|
if (env->insns_flags & PPC_ALTIVEC) {
|
|
uint32_t vmx = (env->insns_flags2 & PPC2_VSX) ? 2 : 1;
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,vmx", vmx)));
|
|
}
|
|
|
|
/* Advertise DFP (Decimal Floating Point) if available
|
|
* 0 / no property == no DFP
|
|
* 1 == DFP available */
|
|
if (env->insns_flags2 & PPC2_DFP) {
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,dfp", 1)));
|
|
}
|
|
|
|
page_sizes_prop_size = ppc_create_page_sizes_prop(env, page_sizes_prop,
|
|
sizeof(page_sizes_prop));
|
|
if (page_sizes_prop_size) {
|
|
_FDT((fdt_setprop(fdt, offset, "ibm,segment-page-sizes",
|
|
page_sizes_prop, page_sizes_prop_size)));
|
|
}
|
|
|
|
spapr_populate_pa_features(env, fdt, offset);
|
|
|
|
_FDT((fdt_setprop_cell(fdt, offset, "ibm,chip-id",
|
|
cs->cpu_index / vcpus_per_socket)));
|
|
|
|
_FDT((fdt_setprop(fdt, offset, "ibm,pft-size",
|
|
pft_size_prop, sizeof(pft_size_prop))));
|
|
|
|
_FDT(spapr_fixup_cpu_numa_dt(fdt, offset, cs));
|
|
|
|
_FDT(spapr_fixup_cpu_smt_dt(fdt, offset, cpu,
|
|
ppc_get_compat_smt_threads(cpu)));
|
|
}
|
|
|
|
static void spapr_populate_cpus_dt_node(void *fdt, sPAPRMachineState *spapr)
|
|
{
|
|
CPUState *cs;
|
|
int cpus_offset;
|
|
char *nodename;
|
|
int smt = kvmppc_smt_threads();
|
|
|
|
cpus_offset = fdt_add_subnode(fdt, 0, "cpus");
|
|
_FDT(cpus_offset);
|
|
_FDT((fdt_setprop_cell(fdt, cpus_offset, "#address-cells", 0x1)));
|
|
_FDT((fdt_setprop_cell(fdt, cpus_offset, "#size-cells", 0x0)));
|
|
|
|
/*
|
|
* We walk the CPUs in reverse order to ensure that CPU DT nodes
|
|
* created by fdt_add_subnode() end up in the right order in FDT
|
|
* for the guest kernel the enumerate the CPUs correctly.
|
|
*/
|
|
CPU_FOREACH_REVERSE(cs) {
|
|
PowerPCCPU *cpu = POWERPC_CPU(cs);
|
|
int index = ppc_get_vcpu_dt_id(cpu);
|
|
DeviceClass *dc = DEVICE_GET_CLASS(cs);
|
|
int offset;
|
|
|
|
if ((index % smt) != 0) {
|
|
continue;
|
|
}
|
|
|
|
nodename = g_strdup_printf("%s@%x", dc->fw_name, index);
|
|
offset = fdt_add_subnode(fdt, cpus_offset, nodename);
|
|
g_free(nodename);
|
|
_FDT(offset);
|
|
spapr_populate_cpu_dt(cs, fdt, offset, spapr);
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
* Adds ibm,dynamic-reconfiguration-memory node.
|
|
* Refer to docs/specs/ppc-spapr-hotplug.txt for the documentation
|
|
* of this device tree node.
|
|
*/
|
|
static int spapr_populate_drconf_memory(sPAPRMachineState *spapr, void *fdt)
|
|
{
|
|
MachineState *machine = MACHINE(spapr);
|
|
int ret, i, offset;
|
|
uint64_t lmb_size = SPAPR_MEMORY_BLOCK_SIZE;
|
|
uint32_t prop_lmb_size[] = {0, cpu_to_be32(lmb_size)};
|
|
uint32_t hotplug_lmb_start = spapr->hotplug_memory.base / lmb_size;
|
|
uint32_t nr_lmbs = (spapr->hotplug_memory.base +
|
|
memory_region_size(&spapr->hotplug_memory.mr)) /
|
|
lmb_size;
|
|
uint32_t *int_buf, *cur_index, buf_len;
|
|
int nr_nodes = nb_numa_nodes ? nb_numa_nodes : 1;
|
|
|
|
/*
|
|
* Don't create the node if there is no hotpluggable memory
|
|
*/
|
|
if (machine->ram_size == machine->maxram_size) {
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Allocate enough buffer size to fit in ibm,dynamic-memory
|
|
* or ibm,associativity-lookup-arrays
|
|
*/
|
|
buf_len = MAX(nr_lmbs * SPAPR_DR_LMB_LIST_ENTRY_SIZE + 1, nr_nodes * 4 + 2)
|
|
* sizeof(uint32_t);
|
|
cur_index = int_buf = g_malloc0(buf_len);
|
|
|
|
offset = fdt_add_subnode(fdt, 0, "ibm,dynamic-reconfiguration-memory");
|
|
|
|
ret = fdt_setprop(fdt, offset, "ibm,lmb-size", prop_lmb_size,
|
|
sizeof(prop_lmb_size));
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
ret = fdt_setprop_cell(fdt, offset, "ibm,memory-flags-mask", 0xff);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
ret = fdt_setprop_cell(fdt, offset, "ibm,memory-preservation-time", 0x0);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
/* ibm,dynamic-memory */
|
|
int_buf[0] = cpu_to_be32(nr_lmbs);
|
|
cur_index++;
|
|
for (i = 0; i < nr_lmbs; i++) {
|
|
uint64_t addr = i * lmb_size;
|
|
uint32_t *dynamic_memory = cur_index;
|
|
|
|
if (i >= hotplug_lmb_start) {
|
|
sPAPRDRConnector *drc;
|
|
sPAPRDRConnectorClass *drck;
|
|
|
|
drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB, i);
|
|
g_assert(drc);
|
|
drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
|
|
|
|
dynamic_memory[0] = cpu_to_be32(addr >> 32);
|
|
dynamic_memory[1] = cpu_to_be32(addr & 0xffffffff);
|
|
dynamic_memory[2] = cpu_to_be32(drck->get_index(drc));
|
|
dynamic_memory[3] = cpu_to_be32(0); /* reserved */
|
|
dynamic_memory[4] = cpu_to_be32(numa_get_node(addr, NULL));
|
|
if (memory_region_present(get_system_memory(), addr)) {
|
|
dynamic_memory[5] = cpu_to_be32(SPAPR_LMB_FLAGS_ASSIGNED);
|
|
} else {
|
|
dynamic_memory[5] = cpu_to_be32(0);
|
|
}
|
|
} else {
|
|
/*
|
|
* LMB information for RMA, boot time RAM and gap b/n RAM and
|
|
* hotplug memory region -- all these are marked as reserved
|
|
* and as having no valid DRC.
|
|
*/
|
|
dynamic_memory[0] = cpu_to_be32(addr >> 32);
|
|
dynamic_memory[1] = cpu_to_be32(addr & 0xffffffff);
|
|
dynamic_memory[2] = cpu_to_be32(0);
|
|
dynamic_memory[3] = cpu_to_be32(0); /* reserved */
|
|
dynamic_memory[4] = cpu_to_be32(-1);
|
|
dynamic_memory[5] = cpu_to_be32(SPAPR_LMB_FLAGS_RESERVED |
|
|
SPAPR_LMB_FLAGS_DRC_INVALID);
|
|
}
|
|
|
|
cur_index += SPAPR_DR_LMB_LIST_ENTRY_SIZE;
|
|
}
|
|
ret = fdt_setprop(fdt, offset, "ibm,dynamic-memory", int_buf, buf_len);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
/* ibm,associativity-lookup-arrays */
|
|
cur_index = int_buf;
|
|
int_buf[0] = cpu_to_be32(nr_nodes);
|
|
int_buf[1] = cpu_to_be32(4); /* Number of entries per associativity list */
|
|
cur_index += 2;
|
|
for (i = 0; i < nr_nodes; i++) {
|
|
uint32_t associativity[] = {
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(0x0),
|
|
cpu_to_be32(i)
|
|
};
|
|
memcpy(cur_index, associativity, sizeof(associativity));
|
|
cur_index += 4;
|
|
}
|
|
ret = fdt_setprop(fdt, offset, "ibm,associativity-lookup-arrays", int_buf,
|
|
(cur_index - int_buf) * sizeof(uint32_t));
|
|
out:
|
|
g_free(int_buf);
|
|
return ret;
|
|
}
|
|
|
|
static int spapr_dt_cas_updates(sPAPRMachineState *spapr, void *fdt,
|
|
sPAPROptionVector *ov5_updates)
|
|
{
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(spapr);
|
|
int ret = 0, offset;
|
|
|
|
/* Generate ibm,dynamic-reconfiguration-memory node if required */
|
|
if (spapr_ovec_test(ov5_updates, OV5_DRCONF_MEMORY)) {
|
|
g_assert(smc->dr_lmb_enabled);
|
|
ret = spapr_populate_drconf_memory(spapr, fdt);
|
|
if (ret) {
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
offset = fdt_path_offset(fdt, "/chosen");
|
|
if (offset < 0) {
|
|
offset = fdt_add_subnode(fdt, 0, "chosen");
|
|
if (offset < 0) {
|
|
return offset;
|
|
}
|
|
}
|
|
ret = spapr_ovec_populate_dt(fdt, offset, spapr->ov5_cas,
|
|
"ibm,architecture-vec-5");
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
int spapr_h_cas_compose_response(sPAPRMachineState *spapr,
|
|
target_ulong addr, target_ulong size,
|
|
bool cpu_update,
|
|
sPAPROptionVector *ov5_updates)
|
|
{
|
|
void *fdt, *fdt_skel;
|
|
sPAPRDeviceTreeUpdateHeader hdr = { .version_id = 1 };
|
|
|
|
size -= sizeof(hdr);
|
|
|
|
/* Create sceleton */
|
|
fdt_skel = g_malloc0(size);
|
|
_FDT((fdt_create(fdt_skel, size)));
|
|
_FDT((fdt_begin_node(fdt_skel, "")));
|
|
_FDT((fdt_end_node(fdt_skel)));
|
|
_FDT((fdt_finish(fdt_skel)));
|
|
fdt = g_malloc0(size);
|
|
_FDT((fdt_open_into(fdt_skel, fdt, size)));
|
|
g_free(fdt_skel);
|
|
|
|
/* Fixup cpu nodes */
|
|
if (cpu_update) {
|
|
_FDT((spapr_fixup_cpu_dt(fdt, spapr)));
|
|
}
|
|
|
|
if (spapr_dt_cas_updates(spapr, fdt, ov5_updates)) {
|
|
return -1;
|
|
}
|
|
|
|
/* Pack resulting tree */
|
|
_FDT((fdt_pack(fdt)));
|
|
|
|
if (fdt_totalsize(fdt) + sizeof(hdr) > size) {
|
|
trace_spapr_cas_failed(size);
|
|
return -1;
|
|
}
|
|
|
|
cpu_physical_memory_write(addr, &hdr, sizeof(hdr));
|
|
cpu_physical_memory_write(addr + sizeof(hdr), fdt, fdt_totalsize(fdt));
|
|
trace_spapr_cas_continue(fdt_totalsize(fdt) + sizeof(hdr));
|
|
g_free(fdt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spapr_dt_rtas(sPAPRMachineState *spapr, void *fdt)
|
|
{
|
|
int rtas;
|
|
GString *hypertas = g_string_sized_new(256);
|
|
GString *qemu_hypertas = g_string_sized_new(256);
|
|
uint32_t refpoints[] = { cpu_to_be32(0x4), cpu_to_be32(0x4) };
|
|
uint64_t max_hotplug_addr = spapr->hotplug_memory.base +
|
|
memory_region_size(&spapr->hotplug_memory.mr);
|
|
uint32_t lrdr_capacity[] = {
|
|
cpu_to_be32(max_hotplug_addr >> 32),
|
|
cpu_to_be32(max_hotplug_addr & 0xffffffff),
|
|
0, cpu_to_be32(SPAPR_MEMORY_BLOCK_SIZE),
|
|
cpu_to_be32(max_cpus / smp_threads),
|
|
};
|
|
|
|
_FDT(rtas = fdt_add_subnode(fdt, 0, "rtas"));
|
|
|
|
/* hypertas */
|
|
add_str(hypertas, "hcall-pft");
|
|
add_str(hypertas, "hcall-term");
|
|
add_str(hypertas, "hcall-dabr");
|
|
add_str(hypertas, "hcall-interrupt");
|
|
add_str(hypertas, "hcall-tce");
|
|
add_str(hypertas, "hcall-vio");
|
|
add_str(hypertas, "hcall-splpar");
|
|
add_str(hypertas, "hcall-bulk");
|
|
add_str(hypertas, "hcall-set-mode");
|
|
add_str(hypertas, "hcall-sprg0");
|
|
add_str(hypertas, "hcall-copy");
|
|
add_str(hypertas, "hcall-debug");
|
|
add_str(qemu_hypertas, "hcall-memop1");
|
|
|
|
if (!kvm_enabled() || kvmppc_spapr_use_multitce()) {
|
|
add_str(hypertas, "hcall-multi-tce");
|
|
}
|
|
_FDT(fdt_setprop(fdt, rtas, "ibm,hypertas-functions",
|
|
hypertas->str, hypertas->len));
|
|
g_string_free(hypertas, TRUE);
|
|
_FDT(fdt_setprop(fdt, rtas, "qemu,hypertas-functions",
|
|
qemu_hypertas->str, qemu_hypertas->len));
|
|
g_string_free(qemu_hypertas, TRUE);
|
|
|
|
_FDT(fdt_setprop(fdt, rtas, "ibm,associativity-reference-points",
|
|
refpoints, sizeof(refpoints)));
|
|
|
|
_FDT(fdt_setprop_cell(fdt, rtas, "rtas-error-log-max",
|
|
RTAS_ERROR_LOG_MAX));
|
|
_FDT(fdt_setprop_cell(fdt, rtas, "rtas-event-scan-rate",
|
|
RTAS_EVENT_SCAN_RATE));
|
|
|
|
if (msi_nonbroken) {
|
|
_FDT(fdt_setprop(fdt, rtas, "ibm,change-msix-capable", NULL, 0));
|
|
}
|
|
|
|
/*
|
|
* According to PAPR, rtas ibm,os-term does not guarantee a return
|
|
* back to the guest cpu.
|
|
*
|
|
* While an additional ibm,extended-os-term property indicates
|
|
* that rtas call return will always occur. Set this property.
|
|
*/
|
|
_FDT(fdt_setprop(fdt, rtas, "ibm,extended-os-term", NULL, 0));
|
|
|
|
_FDT(fdt_setprop(fdt, rtas, "ibm,lrdr-capacity",
|
|
lrdr_capacity, sizeof(lrdr_capacity)));
|
|
|
|
spapr_dt_rtas_tokens(fdt, rtas);
|
|
}
|
|
|
|
static void spapr_dt_chosen(sPAPRMachineState *spapr, void *fdt)
|
|
{
|
|
MachineState *machine = MACHINE(spapr);
|
|
int chosen;
|
|
const char *boot_device = machine->boot_order;
|
|
char *stdout_path = spapr_vio_stdout_path(spapr->vio_bus);
|
|
size_t cb = 0;
|
|
char *bootlist = get_boot_devices_list(&cb, true);
|
|
|
|
_FDT(chosen = fdt_add_subnode(fdt, 0, "chosen"));
|
|
|
|
_FDT(fdt_setprop_string(fdt, chosen, "bootargs", machine->kernel_cmdline));
|
|
_FDT(fdt_setprop_cell(fdt, chosen, "linux,initrd-start",
|
|
spapr->initrd_base));
|
|
_FDT(fdt_setprop_cell(fdt, chosen, "linux,initrd-end",
|
|
spapr->initrd_base + spapr->initrd_size));
|
|
|
|
if (spapr->kernel_size) {
|
|
uint64_t kprop[2] = { cpu_to_be64(KERNEL_LOAD_ADDR),
|
|
cpu_to_be64(spapr->kernel_size) };
|
|
|
|
_FDT(fdt_setprop(fdt, chosen, "qemu,boot-kernel",
|
|
&kprop, sizeof(kprop)));
|
|
if (spapr->kernel_le) {
|
|
_FDT(fdt_setprop(fdt, chosen, "qemu,boot-kernel-le", NULL, 0));
|
|
}
|
|
}
|
|
if (boot_menu) {
|
|
_FDT((fdt_setprop_cell(fdt, chosen, "qemu,boot-menu", boot_menu)));
|
|
}
|
|
_FDT(fdt_setprop_cell(fdt, chosen, "qemu,graphic-width", graphic_width));
|
|
_FDT(fdt_setprop_cell(fdt, chosen, "qemu,graphic-height", graphic_height));
|
|
_FDT(fdt_setprop_cell(fdt, chosen, "qemu,graphic-depth", graphic_depth));
|
|
|
|
if (cb && bootlist) {
|
|
int i;
|
|
|
|
for (i = 0; i < cb; i++) {
|
|
if (bootlist[i] == '\n') {
|
|
bootlist[i] = ' ';
|
|
}
|
|
}
|
|
_FDT(fdt_setprop_string(fdt, chosen, "qemu,boot-list", bootlist));
|
|
}
|
|
|
|
if (boot_device && strlen(boot_device)) {
|
|
_FDT(fdt_setprop_string(fdt, chosen, "qemu,boot-device", boot_device));
|
|
}
|
|
|
|
if (!spapr->has_graphics && stdout_path) {
|
|
_FDT(fdt_setprop_string(fdt, chosen, "linux,stdout-path", stdout_path));
|
|
}
|
|
|
|
g_free(stdout_path);
|
|
g_free(bootlist);
|
|
}
|
|
|
|
static void spapr_dt_hypervisor(sPAPRMachineState *spapr, void *fdt)
|
|
{
|
|
/* The /hypervisor node isn't in PAPR - this is a hack to allow PR
|
|
* KVM to work under pHyp with some guest co-operation */
|
|
int hypervisor;
|
|
uint8_t hypercall[16];
|
|
|
|
_FDT(hypervisor = fdt_add_subnode(fdt, 0, "hypervisor"));
|
|
/* indicate KVM hypercall interface */
|
|
_FDT(fdt_setprop_string(fdt, hypervisor, "compatible", "linux,kvm"));
|
|
if (kvmppc_has_cap_fixup_hcalls()) {
|
|
/*
|
|
* Older KVM versions with older guest kernels were broken
|
|
* with the magic page, don't allow the guest to map it.
|
|
*/
|
|
if (!kvmppc_get_hypercall(first_cpu->env_ptr, hypercall,
|
|
sizeof(hypercall))) {
|
|
_FDT(fdt_setprop(fdt, hypervisor, "hcall-instructions",
|
|
hypercall, sizeof(hypercall)));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void *spapr_build_fdt(sPAPRMachineState *spapr,
|
|
hwaddr rtas_addr,
|
|
hwaddr rtas_size)
|
|
{
|
|
MachineState *machine = MACHINE(qdev_get_machine());
|
|
MachineClass *mc = MACHINE_GET_CLASS(machine);
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(machine);
|
|
int ret;
|
|
void *fdt;
|
|
sPAPRPHBState *phb;
|
|
char *buf;
|
|
|
|
fdt = g_malloc0(FDT_MAX_SIZE);
|
|
_FDT((fdt_create_empty_tree(fdt, FDT_MAX_SIZE)));
|
|
|
|
/* Root node */
|
|
_FDT(fdt_setprop_string(fdt, 0, "device_type", "chrp"));
|
|
_FDT(fdt_setprop_string(fdt, 0, "model", "IBM pSeries (emulated by qemu)"));
|
|
_FDT(fdt_setprop_string(fdt, 0, "compatible", "qemu,pseries"));
|
|
|
|
/*
|
|
* Add info to guest to indentify which host is it being run on
|
|
* and what is the uuid of the guest
|
|
*/
|
|
if (kvmppc_get_host_model(&buf)) {
|
|
_FDT(fdt_setprop_string(fdt, 0, "host-model", buf));
|
|
g_free(buf);
|
|
}
|
|
if (kvmppc_get_host_serial(&buf)) {
|
|
_FDT(fdt_setprop_string(fdt, 0, "host-serial", buf));
|
|
g_free(buf);
|
|
}
|
|
|
|
buf = qemu_uuid_unparse_strdup(&qemu_uuid);
|
|
|
|
_FDT(fdt_setprop_string(fdt, 0, "vm,uuid", buf));
|
|
if (qemu_uuid_set) {
|
|
_FDT(fdt_setprop_string(fdt, 0, "system-id", buf));
|
|
}
|
|
g_free(buf);
|
|
|
|
if (qemu_get_vm_name()) {
|
|
_FDT(fdt_setprop_string(fdt, 0, "ibm,partition-name",
|
|
qemu_get_vm_name()));
|
|
}
|
|
|
|
_FDT(fdt_setprop_cell(fdt, 0, "#address-cells", 2));
|
|
_FDT(fdt_setprop_cell(fdt, 0, "#size-cells", 2));
|
|
|
|
/* /interrupt controller */
|
|
spapr_dt_xics(spapr->xics, fdt, PHANDLE_XICP);
|
|
|
|
ret = spapr_populate_memory(spapr, fdt);
|
|
if (ret < 0) {
|
|
error_report("couldn't setup memory nodes in fdt");
|
|
exit(1);
|
|
}
|
|
|
|
/* /vdevice */
|
|
spapr_dt_vdevice(spapr->vio_bus, fdt);
|
|
|
|
if (object_resolve_path_type("", TYPE_SPAPR_RNG, NULL)) {
|
|
ret = spapr_rng_populate_dt(fdt);
|
|
if (ret < 0) {
|
|
error_report("could not set up rng device in the fdt");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
QLIST_FOREACH(phb, &spapr->phbs, list) {
|
|
ret = spapr_populate_pci_dt(phb, PHANDLE_XICP, fdt);
|
|
if (ret < 0) {
|
|
error_report("couldn't setup PCI devices in fdt");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
/* cpus */
|
|
spapr_populate_cpus_dt_node(fdt, spapr);
|
|
|
|
if (smc->dr_lmb_enabled) {
|
|
_FDT(spapr_drc_populate_dt(fdt, 0, NULL, SPAPR_DR_CONNECTOR_TYPE_LMB));
|
|
}
|
|
|
|
if (mc->query_hotpluggable_cpus) {
|
|
int offset = fdt_path_offset(fdt, "/cpus");
|
|
ret = spapr_drc_populate_dt(fdt, offset, NULL,
|
|
SPAPR_DR_CONNECTOR_TYPE_CPU);
|
|
if (ret < 0) {
|
|
error_report("Couldn't set up CPU DR device tree properties");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
/* /event-sources */
|
|
spapr_dt_events(spapr, fdt);
|
|
|
|
/* /rtas */
|
|
spapr_dt_rtas(spapr, fdt);
|
|
|
|
/* /chosen */
|
|
spapr_dt_chosen(spapr, fdt);
|
|
|
|
/* /hypervisor */
|
|
if (kvm_enabled()) {
|
|
spapr_dt_hypervisor(spapr, fdt);
|
|
}
|
|
|
|
/* Build memory reserve map */
|
|
if (spapr->kernel_size) {
|
|
_FDT((fdt_add_mem_rsv(fdt, KERNEL_LOAD_ADDR, spapr->kernel_size)));
|
|
}
|
|
if (spapr->initrd_size) {
|
|
_FDT((fdt_add_mem_rsv(fdt, spapr->initrd_base, spapr->initrd_size)));
|
|
}
|
|
|
|
/* ibm,client-architecture-support updates */
|
|
ret = spapr_dt_cas_updates(spapr, fdt, spapr->ov5_cas);
|
|
if (ret < 0) {
|
|
error_report("couldn't setup CAS properties fdt");
|
|
exit(1);
|
|
}
|
|
|
|
return fdt;
|
|
}
|
|
|
|
static uint64_t translate_kernel_address(void *opaque, uint64_t addr)
|
|
{
|
|
return (addr & 0x0fffffff) + KERNEL_LOAD_ADDR;
|
|
}
|
|
|
|
static void emulate_spapr_hypercall(PowerPCCPU *cpu)
|
|
{
|
|
CPUPPCState *env = &cpu->env;
|
|
|
|
if (msr_pr) {
|
|
hcall_dprintf("Hypercall made with MSR[PR]=1\n");
|
|
env->gpr[3] = H_PRIVILEGE;
|
|
} else {
|
|
env->gpr[3] = spapr_hypercall(cpu, env->gpr[3], &env->gpr[4]);
|
|
}
|
|
}
|
|
|
|
#define HPTE(_table, _i) (void *)(((uint64_t *)(_table)) + ((_i) * 2))
|
|
#define HPTE_VALID(_hpte) (tswap64(*((uint64_t *)(_hpte))) & HPTE64_V_VALID)
|
|
#define HPTE_DIRTY(_hpte) (tswap64(*((uint64_t *)(_hpte))) & HPTE64_V_HPTE_DIRTY)
|
|
#define CLEAN_HPTE(_hpte) ((*(uint64_t *)(_hpte)) &= tswap64(~HPTE64_V_HPTE_DIRTY))
|
|
#define DIRTY_HPTE(_hpte) ((*(uint64_t *)(_hpte)) |= tswap64(HPTE64_V_HPTE_DIRTY))
|
|
|
|
/*
|
|
* Get the fd to access the kernel htab, re-opening it if necessary
|
|
*/
|
|
static int get_htab_fd(sPAPRMachineState *spapr)
|
|
{
|
|
if (spapr->htab_fd >= 0) {
|
|
return spapr->htab_fd;
|
|
}
|
|
|
|
spapr->htab_fd = kvmppc_get_htab_fd(false);
|
|
if (spapr->htab_fd < 0) {
|
|
error_report("Unable to open fd for reading hash table from KVM: %s",
|
|
strerror(errno));
|
|
}
|
|
|
|
return spapr->htab_fd;
|
|
}
|
|
|
|
static void close_htab_fd(sPAPRMachineState *spapr)
|
|
{
|
|
if (spapr->htab_fd >= 0) {
|
|
close(spapr->htab_fd);
|
|
}
|
|
spapr->htab_fd = -1;
|
|
}
|
|
|
|
static int spapr_hpt_shift_for_ramsize(uint64_t ramsize)
|
|
{
|
|
int shift;
|
|
|
|
/* We aim for a hash table of size 1/128 the size of RAM (rounded
|
|
* up). The PAPR recommendation is actually 1/64 of RAM size, but
|
|
* that's much more than is needed for Linux guests */
|
|
shift = ctz64(pow2ceil(ramsize)) - 7;
|
|
shift = MAX(shift, 18); /* Minimum architected size */
|
|
shift = MIN(shift, 46); /* Maximum architected size */
|
|
return shift;
|
|
}
|
|
|
|
static void spapr_reallocate_hpt(sPAPRMachineState *spapr, int shift,
|
|
Error **errp)
|
|
{
|
|
long rc;
|
|
|
|
/* Clean up any HPT info from a previous boot */
|
|
g_free(spapr->htab);
|
|
spapr->htab = NULL;
|
|
spapr->htab_shift = 0;
|
|
close_htab_fd(spapr);
|
|
|
|
rc = kvmppc_reset_htab(shift);
|
|
if (rc < 0) {
|
|
/* kernel-side HPT needed, but couldn't allocate one */
|
|
error_setg_errno(errp, errno,
|
|
"Failed to allocate KVM HPT of order %d (try smaller maxmem?)",
|
|
shift);
|
|
/* This is almost certainly fatal, but if the caller really
|
|
* wants to carry on with shift == 0, it's welcome to try */
|
|
} else if (rc > 0) {
|
|
/* kernel-side HPT allocated */
|
|
if (rc != shift) {
|
|
error_setg(errp,
|
|
"Requested order %d HPT, but kernel allocated order %ld (try smaller maxmem?)",
|
|
shift, rc);
|
|
}
|
|
|
|
spapr->htab_shift = shift;
|
|
spapr->htab = NULL;
|
|
} else {
|
|
/* kernel-side HPT not needed, allocate in userspace instead */
|
|
size_t size = 1ULL << shift;
|
|
int i;
|
|
|
|
spapr->htab = qemu_memalign(size, size);
|
|
if (!spapr->htab) {
|
|
error_setg_errno(errp, errno,
|
|
"Could not allocate HPT of order %d", shift);
|
|
return;
|
|
}
|
|
|
|
memset(spapr->htab, 0, size);
|
|
spapr->htab_shift = shift;
|
|
|
|
for (i = 0; i < size / HASH_PTE_SIZE_64; i++) {
|
|
DIRTY_HPTE(HPTE(spapr->htab, i));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void find_unknown_sysbus_device(SysBusDevice *sbdev, void *opaque)
|
|
{
|
|
bool matched = false;
|
|
|
|
if (object_dynamic_cast(OBJECT(sbdev), TYPE_SPAPR_PCI_HOST_BRIDGE)) {
|
|
matched = true;
|
|
}
|
|
|
|
if (!matched) {
|
|
error_report("Device %s is not supported by this machine yet.",
|
|
qdev_fw_name(DEVICE(sbdev)));
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
static void ppc_spapr_reset(void)
|
|
{
|
|
MachineState *machine = MACHINE(qdev_get_machine());
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(machine);
|
|
PowerPCCPU *first_ppc_cpu;
|
|
uint32_t rtas_limit;
|
|
hwaddr rtas_addr, fdt_addr;
|
|
void *fdt;
|
|
int rc;
|
|
|
|
/* Check for unknown sysbus devices */
|
|
foreach_dynamic_sysbus_device(find_unknown_sysbus_device, NULL);
|
|
|
|
/* Allocate and/or reset the hash page table */
|
|
spapr_reallocate_hpt(spapr,
|
|
spapr_hpt_shift_for_ramsize(machine->maxram_size),
|
|
&error_fatal);
|
|
|
|
/* Update the RMA size if necessary */
|
|
if (spapr->vrma_adjust) {
|
|
spapr->rma_size = kvmppc_rma_size(spapr_node0_size(),
|
|
spapr->htab_shift);
|
|
}
|
|
|
|
qemu_devices_reset();
|
|
|
|
/*
|
|
* We place the device tree and RTAS just below either the top of the RMA,
|
|
* or just below 2GB, whichever is lowere, so that it can be
|
|
* processed with 32-bit real mode code if necessary
|
|
*/
|
|
rtas_limit = MIN(spapr->rma_size, RTAS_MAX_ADDR);
|
|
rtas_addr = rtas_limit - RTAS_MAX_SIZE;
|
|
fdt_addr = rtas_addr - FDT_MAX_SIZE;
|
|
|
|
/* if this reset wasn't generated by CAS, we should reset our
|
|
* negotiated options and start from scratch */
|
|
if (!spapr->cas_reboot) {
|
|
spapr_ovec_cleanup(spapr->ov5_cas);
|
|
spapr->ov5_cas = spapr_ovec_new();
|
|
}
|
|
|
|
fdt = spapr_build_fdt(spapr, rtas_addr, spapr->rtas_size);
|
|
|
|
spapr_load_rtas(spapr, fdt, rtas_addr);
|
|
|
|
rc = fdt_pack(fdt);
|
|
|
|
/* Should only fail if we've built a corrupted tree */
|
|
assert(rc == 0);
|
|
|
|
if (fdt_totalsize(fdt) > FDT_MAX_SIZE) {
|
|
error_report("FDT too big ! 0x%x bytes (max is 0x%x)",
|
|
fdt_totalsize(fdt), FDT_MAX_SIZE);
|
|
exit(1);
|
|
}
|
|
|
|
/* Load the fdt */
|
|
qemu_fdt_dumpdtb(fdt, fdt_totalsize(fdt));
|
|
cpu_physical_memory_write(fdt_addr, fdt, fdt_totalsize(fdt));
|
|
g_free(fdt);
|
|
|
|
/* Set up the entry state */
|
|
first_ppc_cpu = POWERPC_CPU(first_cpu);
|
|
first_ppc_cpu->env.gpr[3] = fdt_addr;
|
|
first_ppc_cpu->env.gpr[5] = 0;
|
|
first_cpu->halted = 0;
|
|
first_ppc_cpu->env.nip = SPAPR_ENTRY_POINT;
|
|
|
|
spapr->cas_reboot = false;
|
|
}
|
|
|
|
static void spapr_create_nvram(sPAPRMachineState *spapr)
|
|
{
|
|
DeviceState *dev = qdev_create(&spapr->vio_bus->bus, "spapr-nvram");
|
|
DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0);
|
|
|
|
if (dinfo) {
|
|
qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo),
|
|
&error_fatal);
|
|
}
|
|
|
|
qdev_init_nofail(dev);
|
|
|
|
spapr->nvram = (struct sPAPRNVRAM *)dev;
|
|
}
|
|
|
|
static void spapr_rtc_create(sPAPRMachineState *spapr)
|
|
{
|
|
DeviceState *dev = qdev_create(NULL, TYPE_SPAPR_RTC);
|
|
|
|
qdev_init_nofail(dev);
|
|
spapr->rtc = dev;
|
|
|
|
object_property_add_alias(qdev_get_machine(), "rtc-time",
|
|
OBJECT(spapr->rtc), "date", NULL);
|
|
}
|
|
|
|
/* Returns whether we want to use VGA or not */
|
|
static bool spapr_vga_init(PCIBus *pci_bus, Error **errp)
|
|
{
|
|
switch (vga_interface_type) {
|
|
case VGA_NONE:
|
|
return false;
|
|
case VGA_DEVICE:
|
|
return true;
|
|
case VGA_STD:
|
|
case VGA_VIRTIO:
|
|
return pci_vga_init(pci_bus) != NULL;
|
|
default:
|
|
error_setg(errp,
|
|
"Unsupported VGA mode, only -vga std or -vga virtio is supported");
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static int spapr_post_load(void *opaque, int version_id)
|
|
{
|
|
sPAPRMachineState *spapr = (sPAPRMachineState *)opaque;
|
|
int err = 0;
|
|
|
|
/* In earlier versions, there was no separate qdev for the PAPR
|
|
* RTC, so the RTC offset was stored directly in sPAPREnvironment.
|
|
* So when migrating from those versions, poke the incoming offset
|
|
* value into the RTC device */
|
|
if (version_id < 3) {
|
|
err = spapr_rtc_import_offset(spapr->rtc, spapr->rtc_offset);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static bool version_before_3(void *opaque, int version_id)
|
|
{
|
|
return version_id < 3;
|
|
}
|
|
|
|
static bool spapr_ov5_cas_needed(void *opaque)
|
|
{
|
|
sPAPRMachineState *spapr = opaque;
|
|
sPAPROptionVector *ov5_mask = spapr_ovec_new();
|
|
sPAPROptionVector *ov5_legacy = spapr_ovec_new();
|
|
sPAPROptionVector *ov5_removed = spapr_ovec_new();
|
|
bool cas_needed;
|
|
|
|
/* Prior to the introduction of sPAPROptionVector, we had two option
|
|
* vectors we dealt with: OV5_FORM1_AFFINITY, and OV5_DRCONF_MEMORY.
|
|
* Both of these options encode machine topology into the device-tree
|
|
* in such a way that the now-booted OS should still be able to interact
|
|
* appropriately with QEMU regardless of what options were actually
|
|
* negotiatied on the source side.
|
|
*
|
|
* As such, we can avoid migrating the CAS-negotiated options if these
|
|
* are the only options available on the current machine/platform.
|
|
* Since these are the only options available for pseries-2.7 and
|
|
* earlier, this allows us to maintain old->new/new->old migration
|
|
* compatibility.
|
|
*
|
|
* For QEMU 2.8+, there are additional CAS-negotiatable options available
|
|
* via default pseries-2.8 machines and explicit command-line parameters.
|
|
* Some of these options, like OV5_HP_EVT, *do* require QEMU to be aware
|
|
* of the actual CAS-negotiated values to continue working properly. For
|
|
* example, availability of memory unplug depends on knowing whether
|
|
* OV5_HP_EVT was negotiated via CAS.
|
|
*
|
|
* Thus, for any cases where the set of available CAS-negotiatable
|
|
* options extends beyond OV5_FORM1_AFFINITY and OV5_DRCONF_MEMORY, we
|
|
* include the CAS-negotiated options in the migration stream.
|
|
*/
|
|
spapr_ovec_set(ov5_mask, OV5_FORM1_AFFINITY);
|
|
spapr_ovec_set(ov5_mask, OV5_DRCONF_MEMORY);
|
|
|
|
/* spapr_ovec_diff returns true if bits were removed. we avoid using
|
|
* the mask itself since in the future it's possible "legacy" bits may be
|
|
* removed via machine options, which could generate a false positive
|
|
* that breaks migration.
|
|
*/
|
|
spapr_ovec_intersect(ov5_legacy, spapr->ov5, ov5_mask);
|
|
cas_needed = spapr_ovec_diff(ov5_removed, spapr->ov5, ov5_legacy);
|
|
|
|
spapr_ovec_cleanup(ov5_mask);
|
|
spapr_ovec_cleanup(ov5_legacy);
|
|
spapr_ovec_cleanup(ov5_removed);
|
|
|
|
return cas_needed;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_spapr_ov5_cas = {
|
|
.name = "spapr_option_vector_ov5_cas",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.needed = spapr_ov5_cas_needed,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_STRUCT_POINTER_V(ov5_cas, sPAPRMachineState, 1,
|
|
vmstate_spapr_ovec, sPAPROptionVector),
|
|
VMSTATE_END_OF_LIST()
|
|
},
|
|
};
|
|
|
|
static const VMStateDescription vmstate_spapr = {
|
|
.name = "spapr",
|
|
.version_id = 3,
|
|
.minimum_version_id = 1,
|
|
.post_load = spapr_post_load,
|
|
.fields = (VMStateField[]) {
|
|
/* used to be @next_irq */
|
|
VMSTATE_UNUSED_BUFFER(version_before_3, 0, 4),
|
|
|
|
/* RTC offset */
|
|
VMSTATE_UINT64_TEST(rtc_offset, sPAPRMachineState, version_before_3),
|
|
|
|
VMSTATE_PPC_TIMEBASE_V(tb, sPAPRMachineState, 2),
|
|
VMSTATE_END_OF_LIST()
|
|
},
|
|
.subsections = (const VMStateDescription*[]) {
|
|
&vmstate_spapr_ov5_cas,
|
|
NULL
|
|
}
|
|
};
|
|
|
|
static int htab_save_setup(QEMUFile *f, void *opaque)
|
|
{
|
|
sPAPRMachineState *spapr = opaque;
|
|
|
|
/* "Iteration" header */
|
|
qemu_put_be32(f, spapr->htab_shift);
|
|
|
|
if (spapr->htab) {
|
|
spapr->htab_save_index = 0;
|
|
spapr->htab_first_pass = true;
|
|
} else {
|
|
assert(kvm_enabled());
|
|
}
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void htab_save_first_pass(QEMUFile *f, sPAPRMachineState *spapr,
|
|
int64_t max_ns)
|
|
{
|
|
bool has_timeout = max_ns != -1;
|
|
int htabslots = HTAB_SIZE(spapr) / HASH_PTE_SIZE_64;
|
|
int index = spapr->htab_save_index;
|
|
int64_t starttime = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
|
|
|
|
assert(spapr->htab_first_pass);
|
|
|
|
do {
|
|
int chunkstart;
|
|
|
|
/* Consume invalid HPTEs */
|
|
while ((index < htabslots)
|
|
&& !HPTE_VALID(HPTE(spapr->htab, index))) {
|
|
index++;
|
|
CLEAN_HPTE(HPTE(spapr->htab, index));
|
|
}
|
|
|
|
/* Consume valid HPTEs */
|
|
chunkstart = index;
|
|
while ((index < htabslots) && (index - chunkstart < USHRT_MAX)
|
|
&& HPTE_VALID(HPTE(spapr->htab, index))) {
|
|
index++;
|
|
CLEAN_HPTE(HPTE(spapr->htab, index));
|
|
}
|
|
|
|
if (index > chunkstart) {
|
|
int n_valid = index - chunkstart;
|
|
|
|
qemu_put_be32(f, chunkstart);
|
|
qemu_put_be16(f, n_valid);
|
|
qemu_put_be16(f, 0);
|
|
qemu_put_buffer(f, HPTE(spapr->htab, chunkstart),
|
|
HASH_PTE_SIZE_64 * n_valid);
|
|
|
|
if (has_timeout &&
|
|
(qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - starttime) > max_ns) {
|
|
break;
|
|
}
|
|
}
|
|
} while ((index < htabslots) && !qemu_file_rate_limit(f));
|
|
|
|
if (index >= htabslots) {
|
|
assert(index == htabslots);
|
|
index = 0;
|
|
spapr->htab_first_pass = false;
|
|
}
|
|
spapr->htab_save_index = index;
|
|
}
|
|
|
|
static int htab_save_later_pass(QEMUFile *f, sPAPRMachineState *spapr,
|
|
int64_t max_ns)
|
|
{
|
|
bool final = max_ns < 0;
|
|
int htabslots = HTAB_SIZE(spapr) / HASH_PTE_SIZE_64;
|
|
int examined = 0, sent = 0;
|
|
int index = spapr->htab_save_index;
|
|
int64_t starttime = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
|
|
|
|
assert(!spapr->htab_first_pass);
|
|
|
|
do {
|
|
int chunkstart, invalidstart;
|
|
|
|
/* Consume non-dirty HPTEs */
|
|
while ((index < htabslots)
|
|
&& !HPTE_DIRTY(HPTE(spapr->htab, index))) {
|
|
index++;
|
|
examined++;
|
|
}
|
|
|
|
chunkstart = index;
|
|
/* Consume valid dirty HPTEs */
|
|
while ((index < htabslots) && (index - chunkstart < USHRT_MAX)
|
|
&& HPTE_DIRTY(HPTE(spapr->htab, index))
|
|
&& HPTE_VALID(HPTE(spapr->htab, index))) {
|
|
CLEAN_HPTE(HPTE(spapr->htab, index));
|
|
index++;
|
|
examined++;
|
|
}
|
|
|
|
invalidstart = index;
|
|
/* Consume invalid dirty HPTEs */
|
|
while ((index < htabslots) && (index - invalidstart < USHRT_MAX)
|
|
&& HPTE_DIRTY(HPTE(spapr->htab, index))
|
|
&& !HPTE_VALID(HPTE(spapr->htab, index))) {
|
|
CLEAN_HPTE(HPTE(spapr->htab, index));
|
|
index++;
|
|
examined++;
|
|
}
|
|
|
|
if (index > chunkstart) {
|
|
int n_valid = invalidstart - chunkstart;
|
|
int n_invalid = index - invalidstart;
|
|
|
|
qemu_put_be32(f, chunkstart);
|
|
qemu_put_be16(f, n_valid);
|
|
qemu_put_be16(f, n_invalid);
|
|
qemu_put_buffer(f, HPTE(spapr->htab, chunkstart),
|
|
HASH_PTE_SIZE_64 * n_valid);
|
|
sent += index - chunkstart;
|
|
|
|
if (!final && (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - starttime) > max_ns) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (examined >= htabslots) {
|
|
break;
|
|
}
|
|
|
|
if (index >= htabslots) {
|
|
assert(index == htabslots);
|
|
index = 0;
|
|
}
|
|
} while ((examined < htabslots) && (!qemu_file_rate_limit(f) || final));
|
|
|
|
if (index >= htabslots) {
|
|
assert(index == htabslots);
|
|
index = 0;
|
|
}
|
|
|
|
spapr->htab_save_index = index;
|
|
|
|
return (examined >= htabslots) && (sent == 0) ? 1 : 0;
|
|
}
|
|
|
|
#define MAX_ITERATION_NS 5000000 /* 5 ms */
|
|
#define MAX_KVM_BUF_SIZE 2048
|
|
|
|
static int htab_save_iterate(QEMUFile *f, void *opaque)
|
|
{
|
|
sPAPRMachineState *spapr = opaque;
|
|
int fd;
|
|
int rc = 0;
|
|
|
|
/* Iteration header */
|
|
qemu_put_be32(f, 0);
|
|
|
|
if (!spapr->htab) {
|
|
assert(kvm_enabled());
|
|
|
|
fd = get_htab_fd(spapr);
|
|
if (fd < 0) {
|
|
return fd;
|
|
}
|
|
|
|
rc = kvmppc_save_htab(f, fd, MAX_KVM_BUF_SIZE, MAX_ITERATION_NS);
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
} else if (spapr->htab_first_pass) {
|
|
htab_save_first_pass(f, spapr, MAX_ITERATION_NS);
|
|
} else {
|
|
rc = htab_save_later_pass(f, spapr, MAX_ITERATION_NS);
|
|
}
|
|
|
|
/* End marker */
|
|
qemu_put_be32(f, 0);
|
|
qemu_put_be16(f, 0);
|
|
qemu_put_be16(f, 0);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int htab_save_complete(QEMUFile *f, void *opaque)
|
|
{
|
|
sPAPRMachineState *spapr = opaque;
|
|
int fd;
|
|
|
|
/* Iteration header */
|
|
qemu_put_be32(f, 0);
|
|
|
|
if (!spapr->htab) {
|
|
int rc;
|
|
|
|
assert(kvm_enabled());
|
|
|
|
fd = get_htab_fd(spapr);
|
|
if (fd < 0) {
|
|
return fd;
|
|
}
|
|
|
|
rc = kvmppc_save_htab(f, fd, MAX_KVM_BUF_SIZE, -1);
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
} else {
|
|
if (spapr->htab_first_pass) {
|
|
htab_save_first_pass(f, spapr, -1);
|
|
}
|
|
htab_save_later_pass(f, spapr, -1);
|
|
}
|
|
|
|
/* End marker */
|
|
qemu_put_be32(f, 0);
|
|
qemu_put_be16(f, 0);
|
|
qemu_put_be16(f, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int htab_load(QEMUFile *f, void *opaque, int version_id)
|
|
{
|
|
sPAPRMachineState *spapr = opaque;
|
|
uint32_t section_hdr;
|
|
int fd = -1;
|
|
|
|
if (version_id < 1 || version_id > 1) {
|
|
error_report("htab_load() bad version");
|
|
return -EINVAL;
|
|
}
|
|
|
|
section_hdr = qemu_get_be32(f);
|
|
|
|
if (section_hdr) {
|
|
Error *local_err = NULL;
|
|
|
|
/* First section gives the htab size */
|
|
spapr_reallocate_hpt(spapr, section_hdr, &local_err);
|
|
if (local_err) {
|
|
error_report_err(local_err);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (!spapr->htab) {
|
|
assert(kvm_enabled());
|
|
|
|
fd = kvmppc_get_htab_fd(true);
|
|
if (fd < 0) {
|
|
error_report("Unable to open fd to restore KVM hash table: %s",
|
|
strerror(errno));
|
|
}
|
|
}
|
|
|
|
while (true) {
|
|
uint32_t index;
|
|
uint16_t n_valid, n_invalid;
|
|
|
|
index = qemu_get_be32(f);
|
|
n_valid = qemu_get_be16(f);
|
|
n_invalid = qemu_get_be16(f);
|
|
|
|
if ((index == 0) && (n_valid == 0) && (n_invalid == 0)) {
|
|
/* End of Stream */
|
|
break;
|
|
}
|
|
|
|
if ((index + n_valid + n_invalid) >
|
|
(HTAB_SIZE(spapr) / HASH_PTE_SIZE_64)) {
|
|
/* Bad index in stream */
|
|
error_report(
|
|
"htab_load() bad index %d (%hd+%hd entries) in htab stream (htab_shift=%d)",
|
|
index, n_valid, n_invalid, spapr->htab_shift);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (spapr->htab) {
|
|
if (n_valid) {
|
|
qemu_get_buffer(f, HPTE(spapr->htab, index),
|
|
HASH_PTE_SIZE_64 * n_valid);
|
|
}
|
|
if (n_invalid) {
|
|
memset(HPTE(spapr->htab, index + n_valid), 0,
|
|
HASH_PTE_SIZE_64 * n_invalid);
|
|
}
|
|
} else {
|
|
int rc;
|
|
|
|
assert(fd >= 0);
|
|
|
|
rc = kvmppc_load_htab_chunk(f, fd, index, n_valid, n_invalid);
|
|
if (rc < 0) {
|
|
return rc;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!spapr->htab) {
|
|
assert(fd >= 0);
|
|
close(fd);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void htab_cleanup(void *opaque)
|
|
{
|
|
sPAPRMachineState *spapr = opaque;
|
|
|
|
close_htab_fd(spapr);
|
|
}
|
|
|
|
static SaveVMHandlers savevm_htab_handlers = {
|
|
.save_live_setup = htab_save_setup,
|
|
.save_live_iterate = htab_save_iterate,
|
|
.save_live_complete_precopy = htab_save_complete,
|
|
.cleanup = htab_cleanup,
|
|
.load_state = htab_load,
|
|
};
|
|
|
|
static void spapr_boot_set(void *opaque, const char *boot_device,
|
|
Error **errp)
|
|
{
|
|
MachineState *machine = MACHINE(qdev_get_machine());
|
|
machine->boot_order = g_strdup(boot_device);
|
|
}
|
|
|
|
/*
|
|
* Reset routine for LMB DR devices.
|
|
*
|
|
* Unlike PCI DR devices, LMB DR devices explicitly register this reset
|
|
* routine. Reset for PCI DR devices will be handled by PHB reset routine
|
|
* when it walks all its children devices. LMB devices reset occurs
|
|
* as part of spapr_ppc_reset().
|
|
*/
|
|
static void spapr_drc_reset(void *opaque)
|
|
{
|
|
sPAPRDRConnector *drc = opaque;
|
|
DeviceState *d = DEVICE(drc);
|
|
|
|
if (d) {
|
|
device_reset(d);
|
|
}
|
|
}
|
|
|
|
static void spapr_create_lmb_dr_connectors(sPAPRMachineState *spapr)
|
|
{
|
|
MachineState *machine = MACHINE(spapr);
|
|
uint64_t lmb_size = SPAPR_MEMORY_BLOCK_SIZE;
|
|
uint32_t nr_lmbs = (machine->maxram_size - machine->ram_size)/lmb_size;
|
|
int i;
|
|
|
|
for (i = 0; i < nr_lmbs; i++) {
|
|
sPAPRDRConnector *drc;
|
|
uint64_t addr;
|
|
|
|
addr = i * lmb_size + spapr->hotplug_memory.base;
|
|
drc = spapr_dr_connector_new(OBJECT(spapr), SPAPR_DR_CONNECTOR_TYPE_LMB,
|
|
addr/lmb_size);
|
|
qemu_register_reset(spapr_drc_reset, drc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If RAM size, maxmem size and individual node mem sizes aren't aligned
|
|
* to SPAPR_MEMORY_BLOCK_SIZE(256MB), then refuse to start the guest
|
|
* since we can't support such unaligned sizes with DRCONF_MEMORY.
|
|
*/
|
|
static void spapr_validate_node_memory(MachineState *machine, Error **errp)
|
|
{
|
|
int i;
|
|
|
|
if (machine->ram_size % SPAPR_MEMORY_BLOCK_SIZE) {
|
|
error_setg(errp, "Memory size 0x" RAM_ADDR_FMT
|
|
" is not aligned to %llu MiB",
|
|
machine->ram_size,
|
|
SPAPR_MEMORY_BLOCK_SIZE / M_BYTE);
|
|
return;
|
|
}
|
|
|
|
if (machine->maxram_size % SPAPR_MEMORY_BLOCK_SIZE) {
|
|
error_setg(errp, "Maximum memory size 0x" RAM_ADDR_FMT
|
|
" is not aligned to %llu MiB",
|
|
machine->ram_size,
|
|
SPAPR_MEMORY_BLOCK_SIZE / M_BYTE);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < nb_numa_nodes; i++) {
|
|
if (numa_info[i].node_mem % SPAPR_MEMORY_BLOCK_SIZE) {
|
|
error_setg(errp,
|
|
"Node %d memory size 0x%" PRIx64
|
|
" is not aligned to %llu MiB",
|
|
i, numa_info[i].node_mem,
|
|
SPAPR_MEMORY_BLOCK_SIZE / M_BYTE);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* pSeries LPAR / sPAPR hardware init */
|
|
static void ppc_spapr_init(MachineState *machine)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(machine);
|
|
MachineClass *mc = MACHINE_GET_CLASS(machine);
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(machine);
|
|
const char *kernel_filename = machine->kernel_filename;
|
|
const char *initrd_filename = machine->initrd_filename;
|
|
PCIHostState *phb;
|
|
int i;
|
|
MemoryRegion *sysmem = get_system_memory();
|
|
MemoryRegion *ram = g_new(MemoryRegion, 1);
|
|
MemoryRegion *rma_region;
|
|
void *rma = NULL;
|
|
hwaddr rma_alloc_size;
|
|
hwaddr node0_size = spapr_node0_size();
|
|
long load_limit, fw_size;
|
|
char *filename;
|
|
int smt = kvmppc_smt_threads();
|
|
int spapr_cores = smp_cpus / smp_threads;
|
|
int spapr_max_cores = max_cpus / smp_threads;
|
|
|
|
if (mc->query_hotpluggable_cpus) {
|
|
if (smp_cpus % smp_threads) {
|
|
error_report("smp_cpus (%u) must be multiple of threads (%u)",
|
|
smp_cpus, smp_threads);
|
|
exit(1);
|
|
}
|
|
if (max_cpus % smp_threads) {
|
|
error_report("max_cpus (%u) must be multiple of threads (%u)",
|
|
max_cpus, smp_threads);
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
msi_nonbroken = true;
|
|
|
|
QLIST_INIT(&spapr->phbs);
|
|
|
|
cpu_ppc_hypercall = emulate_spapr_hypercall;
|
|
|
|
/* Allocate RMA if necessary */
|
|
rma_alloc_size = kvmppc_alloc_rma(&rma);
|
|
|
|
if (rma_alloc_size == -1) {
|
|
error_report("Unable to create RMA");
|
|
exit(1);
|
|
}
|
|
|
|
if (rma_alloc_size && (rma_alloc_size < node0_size)) {
|
|
spapr->rma_size = rma_alloc_size;
|
|
} else {
|
|
spapr->rma_size = node0_size;
|
|
|
|
/* With KVM, we don't actually know whether KVM supports an
|
|
* unbounded RMA (PR KVM) or is limited by the hash table size
|
|
* (HV KVM using VRMA), so we always assume the latter
|
|
*
|
|
* In that case, we also limit the initial allocations for RTAS
|
|
* etc... to 256M since we have no way to know what the VRMA size
|
|
* is going to be as it depends on the size of the hash table
|
|
* isn't determined yet.
|
|
*/
|
|
if (kvm_enabled()) {
|
|
spapr->vrma_adjust = 1;
|
|
spapr->rma_size = MIN(spapr->rma_size, 0x10000000);
|
|
}
|
|
|
|
/* Actually we don't support unbounded RMA anymore since we
|
|
* added proper emulation of HV mode. The max we can get is
|
|
* 16G which also happens to be what we configure for PAPR
|
|
* mode so make sure we don't do anything bigger than that
|
|
*/
|
|
spapr->rma_size = MIN(spapr->rma_size, 0x400000000ull);
|
|
}
|
|
|
|
if (spapr->rma_size > node0_size) {
|
|
error_report("Numa node 0 has to span the RMA (%#08"HWADDR_PRIx")",
|
|
spapr->rma_size);
|
|
exit(1);
|
|
}
|
|
|
|
/* Setup a load limit for the ramdisk leaving room for SLOF and FDT */
|
|
load_limit = MIN(spapr->rma_size, RTAS_MAX_ADDR) - FW_OVERHEAD;
|
|
|
|
/* Set up Interrupt Controller before we create the VCPUs */
|
|
spapr->xics = xics_system_init(machine,
|
|
DIV_ROUND_UP(max_cpus * smt, smp_threads),
|
|
XICS_IRQS_SPAPR, &error_fatal);
|
|
|
|
/* Set up containers for ibm,client-set-architecture negotiated options */
|
|
spapr->ov5 = spapr_ovec_new();
|
|
spapr->ov5_cas = spapr_ovec_new();
|
|
|
|
if (smc->dr_lmb_enabled) {
|
|
spapr_ovec_set(spapr->ov5, OV5_DRCONF_MEMORY);
|
|
spapr_validate_node_memory(machine, &error_fatal);
|
|
}
|
|
|
|
spapr_ovec_set(spapr->ov5, OV5_FORM1_AFFINITY);
|
|
|
|
/* advertise support for dedicated HP event source to guests */
|
|
if (spapr->use_hotplug_event_source) {
|
|
spapr_ovec_set(spapr->ov5, OV5_HP_EVT);
|
|
}
|
|
|
|
/* init CPUs */
|
|
if (machine->cpu_model == NULL) {
|
|
machine->cpu_model = kvm_enabled() ? "host" : smc->tcg_default_cpu;
|
|
}
|
|
|
|
ppc_cpu_parse_features(machine->cpu_model);
|
|
|
|
if (mc->query_hotpluggable_cpus) {
|
|
char *type = spapr_get_cpu_core_type(machine->cpu_model);
|
|
|
|
if (type == NULL) {
|
|
error_report("Unable to find sPAPR CPU Core definition");
|
|
exit(1);
|
|
}
|
|
|
|
spapr->cores = g_new0(Object *, spapr_max_cores);
|
|
for (i = 0; i < spapr_max_cores; i++) {
|
|
int core_id = i * smp_threads;
|
|
sPAPRDRConnector *drc =
|
|
spapr_dr_connector_new(OBJECT(spapr),
|
|
SPAPR_DR_CONNECTOR_TYPE_CPU,
|
|
(core_id / smp_threads) * smt);
|
|
|
|
qemu_register_reset(spapr_drc_reset, drc);
|
|
|
|
if (i < spapr_cores) {
|
|
Object *core = object_new(type);
|
|
object_property_set_int(core, smp_threads, "nr-threads",
|
|
&error_fatal);
|
|
object_property_set_int(core, core_id, CPU_CORE_PROP_CORE_ID,
|
|
&error_fatal);
|
|
object_property_set_bool(core, true, "realized", &error_fatal);
|
|
}
|
|
}
|
|
g_free(type);
|
|
} else {
|
|
for (i = 0; i < smp_cpus; i++) {
|
|
PowerPCCPU *cpu = cpu_ppc_init(machine->cpu_model);
|
|
if (cpu == NULL) {
|
|
error_report("Unable to find PowerPC CPU definition");
|
|
exit(1);
|
|
}
|
|
spapr_cpu_init(spapr, cpu, &error_fatal);
|
|
}
|
|
}
|
|
|
|
if (kvm_enabled()) {
|
|
/* Enable H_LOGICAL_CI_* so SLOF can talk to in-kernel devices */
|
|
kvmppc_enable_logical_ci_hcalls();
|
|
kvmppc_enable_set_mode_hcall();
|
|
|
|
/* H_CLEAR_MOD/_REF are mandatory in PAPR, but off by default */
|
|
kvmppc_enable_clear_ref_mod_hcalls();
|
|
}
|
|
|
|
/* allocate RAM */
|
|
memory_region_allocate_system_memory(ram, NULL, "ppc_spapr.ram",
|
|
machine->ram_size);
|
|
memory_region_add_subregion(sysmem, 0, ram);
|
|
|
|
if (rma_alloc_size && rma) {
|
|
rma_region = g_new(MemoryRegion, 1);
|
|
memory_region_init_ram_ptr(rma_region, NULL, "ppc_spapr.rma",
|
|
rma_alloc_size, rma);
|
|
vmstate_register_ram_global(rma_region);
|
|
memory_region_add_subregion(sysmem, 0, rma_region);
|
|
}
|
|
|
|
/* initialize hotplug memory address space */
|
|
if (machine->ram_size < machine->maxram_size) {
|
|
ram_addr_t hotplug_mem_size = machine->maxram_size - machine->ram_size;
|
|
/*
|
|
* Limit the number of hotpluggable memory slots to half the number
|
|
* slots that KVM supports, leaving the other half for PCI and other
|
|
* devices. However ensure that number of slots doesn't drop below 32.
|
|
*/
|
|
int max_memslots = kvm_enabled() ? kvm_get_max_memslots() / 2 :
|
|
SPAPR_MAX_RAM_SLOTS;
|
|
|
|
if (max_memslots < SPAPR_MAX_RAM_SLOTS) {
|
|
max_memslots = SPAPR_MAX_RAM_SLOTS;
|
|
}
|
|
if (machine->ram_slots > max_memslots) {
|
|
error_report("Specified number of memory slots %"
|
|
PRIu64" exceeds max supported %d",
|
|
machine->ram_slots, max_memslots);
|
|
exit(1);
|
|
}
|
|
|
|
spapr->hotplug_memory.base = ROUND_UP(machine->ram_size,
|
|
SPAPR_HOTPLUG_MEM_ALIGN);
|
|
memory_region_init(&spapr->hotplug_memory.mr, OBJECT(spapr),
|
|
"hotplug-memory", hotplug_mem_size);
|
|
memory_region_add_subregion(sysmem, spapr->hotplug_memory.base,
|
|
&spapr->hotplug_memory.mr);
|
|
}
|
|
|
|
if (smc->dr_lmb_enabled) {
|
|
spapr_create_lmb_dr_connectors(spapr);
|
|
}
|
|
|
|
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, "spapr-rtas.bin");
|
|
if (!filename) {
|
|
error_report("Could not find LPAR rtas '%s'", "spapr-rtas.bin");
|
|
exit(1);
|
|
}
|
|
spapr->rtas_size = get_image_size(filename);
|
|
if (spapr->rtas_size < 0) {
|
|
error_report("Could not get size of LPAR rtas '%s'", filename);
|
|
exit(1);
|
|
}
|
|
spapr->rtas_blob = g_malloc(spapr->rtas_size);
|
|
if (load_image_size(filename, spapr->rtas_blob, spapr->rtas_size) < 0) {
|
|
error_report("Could not load LPAR rtas '%s'", filename);
|
|
exit(1);
|
|
}
|
|
if (spapr->rtas_size > RTAS_MAX_SIZE) {
|
|
error_report("RTAS too big ! 0x%zx bytes (max is 0x%x)",
|
|
(size_t)spapr->rtas_size, RTAS_MAX_SIZE);
|
|
exit(1);
|
|
}
|
|
g_free(filename);
|
|
|
|
/* Set up RTAS event infrastructure */
|
|
spapr_events_init(spapr);
|
|
|
|
/* Set up the RTC RTAS interfaces */
|
|
spapr_rtc_create(spapr);
|
|
|
|
/* Set up VIO bus */
|
|
spapr->vio_bus = spapr_vio_bus_init();
|
|
|
|
for (i = 0; i < MAX_SERIAL_PORTS; i++) {
|
|
if (serial_hds[i]) {
|
|
spapr_vty_create(spapr->vio_bus, serial_hds[i]);
|
|
}
|
|
}
|
|
|
|
/* We always have at least the nvram device on VIO */
|
|
spapr_create_nvram(spapr);
|
|
|
|
/* Set up PCI */
|
|
spapr_pci_rtas_init();
|
|
|
|
phb = spapr_create_phb(spapr, 0);
|
|
|
|
for (i = 0; i < nb_nics; i++) {
|
|
NICInfo *nd = &nd_table[i];
|
|
|
|
if (!nd->model) {
|
|
nd->model = g_strdup("ibmveth");
|
|
}
|
|
|
|
if (strcmp(nd->model, "ibmveth") == 0) {
|
|
spapr_vlan_create(spapr->vio_bus, nd);
|
|
} else {
|
|
pci_nic_init_nofail(&nd_table[i], phb->bus, nd->model, NULL);
|
|
}
|
|
}
|
|
|
|
for (i = 0; i <= drive_get_max_bus(IF_SCSI); i++) {
|
|
spapr_vscsi_create(spapr->vio_bus);
|
|
}
|
|
|
|
/* Graphics */
|
|
if (spapr_vga_init(phb->bus, &error_fatal)) {
|
|
spapr->has_graphics = true;
|
|
machine->usb |= defaults_enabled() && !machine->usb_disabled;
|
|
}
|
|
|
|
if (machine->usb) {
|
|
if (smc->use_ohci_by_default) {
|
|
pci_create_simple(phb->bus, -1, "pci-ohci");
|
|
} else {
|
|
pci_create_simple(phb->bus, -1, "nec-usb-xhci");
|
|
}
|
|
|
|
if (spapr->has_graphics) {
|
|
USBBus *usb_bus = usb_bus_find(-1);
|
|
|
|
usb_create_simple(usb_bus, "usb-kbd");
|
|
usb_create_simple(usb_bus, "usb-mouse");
|
|
}
|
|
}
|
|
|
|
if (spapr->rma_size < (MIN_RMA_SLOF << 20)) {
|
|
error_report(
|
|
"pSeries SLOF firmware requires >= %ldM guest RMA (Real Mode Area memory)",
|
|
MIN_RMA_SLOF);
|
|
exit(1);
|
|
}
|
|
|
|
if (kernel_filename) {
|
|
uint64_t lowaddr = 0;
|
|
|
|
spapr->kernel_size = load_elf(kernel_filename, translate_kernel_address,
|
|
NULL, NULL, &lowaddr, NULL, 1,
|
|
PPC_ELF_MACHINE, 0, 0);
|
|
if (spapr->kernel_size == ELF_LOAD_WRONG_ENDIAN) {
|
|
spapr->kernel_size = load_elf(kernel_filename,
|
|
translate_kernel_address, NULL, NULL,
|
|
&lowaddr, NULL, 0, PPC_ELF_MACHINE,
|
|
0, 0);
|
|
spapr->kernel_le = spapr->kernel_size > 0;
|
|
}
|
|
if (spapr->kernel_size < 0) {
|
|
error_report("error loading %s: %s", kernel_filename,
|
|
load_elf_strerror(spapr->kernel_size));
|
|
exit(1);
|
|
}
|
|
|
|
/* load initrd */
|
|
if (initrd_filename) {
|
|
/* Try to locate the initrd in the gap between the kernel
|
|
* and the firmware. Add a bit of space just in case
|
|
*/
|
|
spapr->initrd_base = (KERNEL_LOAD_ADDR + spapr->kernel_size
|
|
+ 0x1ffff) & ~0xffff;
|
|
spapr->initrd_size = load_image_targphys(initrd_filename,
|
|
spapr->initrd_base,
|
|
load_limit
|
|
- spapr->initrd_base);
|
|
if (spapr->initrd_size < 0) {
|
|
error_report("could not load initial ram disk '%s'",
|
|
initrd_filename);
|
|
exit(1);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (bios_name == NULL) {
|
|
bios_name = FW_FILE_NAME;
|
|
}
|
|
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
|
|
if (!filename) {
|
|
error_report("Could not find LPAR firmware '%s'", bios_name);
|
|
exit(1);
|
|
}
|
|
fw_size = load_image_targphys(filename, 0, FW_MAX_SIZE);
|
|
if (fw_size <= 0) {
|
|
error_report("Could not load LPAR firmware '%s'", filename);
|
|
exit(1);
|
|
}
|
|
g_free(filename);
|
|
|
|
/* FIXME: Should register things through the MachineState's qdev
|
|
* interface, this is a legacy from the sPAPREnvironment structure
|
|
* which predated MachineState but had a similar function */
|
|
vmstate_register(NULL, 0, &vmstate_spapr, spapr);
|
|
register_savevm_live(NULL, "spapr/htab", -1, 1,
|
|
&savevm_htab_handlers, spapr);
|
|
|
|
/* used by RTAS */
|
|
QTAILQ_INIT(&spapr->ccs_list);
|
|
qemu_register_reset(spapr_ccs_reset_hook, spapr);
|
|
|
|
qemu_register_boot_set(spapr_boot_set, spapr);
|
|
}
|
|
|
|
static int spapr_kvm_type(const char *vm_type)
|
|
{
|
|
if (!vm_type) {
|
|
return 0;
|
|
}
|
|
|
|
if (!strcmp(vm_type, "HV")) {
|
|
return 1;
|
|
}
|
|
|
|
if (!strcmp(vm_type, "PR")) {
|
|
return 2;
|
|
}
|
|
|
|
error_report("Unknown kvm-type specified '%s'", vm_type);
|
|
exit(1);
|
|
}
|
|
|
|
/*
|
|
* Implementation of an interface to adjust firmware path
|
|
* for the bootindex property handling.
|
|
*/
|
|
static char *spapr_get_fw_dev_path(FWPathProvider *p, BusState *bus,
|
|
DeviceState *dev)
|
|
{
|
|
#define CAST(type, obj, name) \
|
|
((type *)object_dynamic_cast(OBJECT(obj), (name)))
|
|
SCSIDevice *d = CAST(SCSIDevice, dev, TYPE_SCSI_DEVICE);
|
|
sPAPRPHBState *phb = CAST(sPAPRPHBState, dev, TYPE_SPAPR_PCI_HOST_BRIDGE);
|
|
|
|
if (d) {
|
|
void *spapr = CAST(void, bus->parent, "spapr-vscsi");
|
|
VirtIOSCSI *virtio = CAST(VirtIOSCSI, bus->parent, TYPE_VIRTIO_SCSI);
|
|
USBDevice *usb = CAST(USBDevice, bus->parent, TYPE_USB_DEVICE);
|
|
|
|
if (spapr) {
|
|
/*
|
|
* Replace "channel@0/disk@0,0" with "disk@8000000000000000":
|
|
* We use SRP luns of the form 8000 | (bus << 8) | (id << 5) | lun
|
|
* in the top 16 bits of the 64-bit LUN
|
|
*/
|
|
unsigned id = 0x8000 | (d->id << 8) | d->lun;
|
|
return g_strdup_printf("%s@%"PRIX64, qdev_fw_name(dev),
|
|
(uint64_t)id << 48);
|
|
} else if (virtio) {
|
|
/*
|
|
* We use SRP luns of the form 01000000 | (target << 8) | lun
|
|
* in the top 32 bits of the 64-bit LUN
|
|
* Note: the quote above is from SLOF and it is wrong,
|
|
* the actual binding is:
|
|
* swap 0100 or 10 << or 20 << ( target lun-id -- srplun )
|
|
*/
|
|
unsigned id = 0x1000000 | (d->id << 16) | d->lun;
|
|
return g_strdup_printf("%s@%"PRIX64, qdev_fw_name(dev),
|
|
(uint64_t)id << 32);
|
|
} else if (usb) {
|
|
/*
|
|
* We use SRP luns of the form 01000000 | (usb-port << 16) | lun
|
|
* in the top 32 bits of the 64-bit LUN
|
|
*/
|
|
unsigned usb_port = atoi(usb->port->path);
|
|
unsigned id = 0x1000000 | (usb_port << 16) | d->lun;
|
|
return g_strdup_printf("%s@%"PRIX64, qdev_fw_name(dev),
|
|
(uint64_t)id << 32);
|
|
}
|
|
}
|
|
|
|
if (phb) {
|
|
/* Replace "pci" with "pci@800000020000000" */
|
|
return g_strdup_printf("pci@%"PRIX64, phb->buid);
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static char *spapr_get_kvm_type(Object *obj, Error **errp)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(obj);
|
|
|
|
return g_strdup(spapr->kvm_type);
|
|
}
|
|
|
|
static void spapr_set_kvm_type(Object *obj, const char *value, Error **errp)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(obj);
|
|
|
|
g_free(spapr->kvm_type);
|
|
spapr->kvm_type = g_strdup(value);
|
|
}
|
|
|
|
static bool spapr_get_modern_hotplug_events(Object *obj, Error **errp)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(obj);
|
|
|
|
return spapr->use_hotplug_event_source;
|
|
}
|
|
|
|
static void spapr_set_modern_hotplug_events(Object *obj, bool value,
|
|
Error **errp)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(obj);
|
|
|
|
spapr->use_hotplug_event_source = value;
|
|
}
|
|
|
|
static void spapr_machine_initfn(Object *obj)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(obj);
|
|
|
|
spapr->htab_fd = -1;
|
|
spapr->use_hotplug_event_source = true;
|
|
object_property_add_str(obj, "kvm-type",
|
|
spapr_get_kvm_type, spapr_set_kvm_type, NULL);
|
|
object_property_set_description(obj, "kvm-type",
|
|
"Specifies the KVM virtualization mode (HV, PR)",
|
|
NULL);
|
|
object_property_add_bool(obj, "modern-hotplug-events",
|
|
spapr_get_modern_hotplug_events,
|
|
spapr_set_modern_hotplug_events,
|
|
NULL);
|
|
object_property_set_description(obj, "modern-hotplug-events",
|
|
"Use dedicated hotplug event mechanism in"
|
|
" place of standard EPOW events when possible"
|
|
" (required for memory hot-unplug support)",
|
|
NULL);
|
|
}
|
|
|
|
static void spapr_machine_finalizefn(Object *obj)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(obj);
|
|
|
|
g_free(spapr->kvm_type);
|
|
}
|
|
|
|
static void ppc_cpu_do_nmi_on_cpu(CPUState *cs, run_on_cpu_data arg)
|
|
{
|
|
cpu_synchronize_state(cs);
|
|
ppc_cpu_do_system_reset(cs);
|
|
}
|
|
|
|
static void spapr_nmi(NMIState *n, int cpu_index, Error **errp)
|
|
{
|
|
CPUState *cs;
|
|
|
|
CPU_FOREACH(cs) {
|
|
async_run_on_cpu(cs, ppc_cpu_do_nmi_on_cpu, RUN_ON_CPU_NULL);
|
|
}
|
|
}
|
|
|
|
static void spapr_add_lmbs(DeviceState *dev, uint64_t addr_start, uint64_t size,
|
|
uint32_t node, bool dedicated_hp_event_source,
|
|
Error **errp)
|
|
{
|
|
sPAPRDRConnector *drc;
|
|
sPAPRDRConnectorClass *drck;
|
|
uint32_t nr_lmbs = size/SPAPR_MEMORY_BLOCK_SIZE;
|
|
int i, fdt_offset, fdt_size;
|
|
void *fdt;
|
|
uint64_t addr = addr_start;
|
|
|
|
for (i = 0; i < nr_lmbs; i++) {
|
|
drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB,
|
|
addr/SPAPR_MEMORY_BLOCK_SIZE);
|
|
g_assert(drc);
|
|
|
|
fdt = create_device_tree(&fdt_size);
|
|
fdt_offset = spapr_populate_memory_node(fdt, node, addr,
|
|
SPAPR_MEMORY_BLOCK_SIZE);
|
|
|
|
drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
|
|
drck->attach(drc, dev, fdt, fdt_offset, !dev->hotplugged, errp);
|
|
addr += SPAPR_MEMORY_BLOCK_SIZE;
|
|
if (!dev->hotplugged) {
|
|
/* guests expect coldplugged LMBs to be pre-allocated */
|
|
drck->set_allocation_state(drc, SPAPR_DR_ALLOCATION_STATE_USABLE);
|
|
drck->set_isolation_state(drc, SPAPR_DR_ISOLATION_STATE_UNISOLATED);
|
|
}
|
|
}
|
|
/* send hotplug notification to the
|
|
* guest only in case of hotplugged memory
|
|
*/
|
|
if (dev->hotplugged) {
|
|
if (dedicated_hp_event_source) {
|
|
drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB,
|
|
addr_start / SPAPR_MEMORY_BLOCK_SIZE);
|
|
drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
|
|
spapr_hotplug_req_add_by_count_indexed(SPAPR_DR_CONNECTOR_TYPE_LMB,
|
|
nr_lmbs,
|
|
drck->get_index(drc));
|
|
} else {
|
|
spapr_hotplug_req_add_by_count(SPAPR_DR_CONNECTOR_TYPE_LMB,
|
|
nr_lmbs);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void spapr_memory_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
|
|
uint32_t node, Error **errp)
|
|
{
|
|
Error *local_err = NULL;
|
|
sPAPRMachineState *ms = SPAPR_MACHINE(hotplug_dev);
|
|
PCDIMMDevice *dimm = PC_DIMM(dev);
|
|
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
|
|
MemoryRegion *mr = ddc->get_memory_region(dimm);
|
|
uint64_t align = memory_region_get_alignment(mr);
|
|
uint64_t size = memory_region_size(mr);
|
|
uint64_t addr;
|
|
|
|
if (size % SPAPR_MEMORY_BLOCK_SIZE) {
|
|
error_setg(&local_err, "Hotplugged memory size must be a multiple of "
|
|
"%lld MB", SPAPR_MEMORY_BLOCK_SIZE/M_BYTE);
|
|
goto out;
|
|
}
|
|
|
|
pc_dimm_memory_plug(dev, &ms->hotplug_memory, mr, align, &local_err);
|
|
if (local_err) {
|
|
goto out;
|
|
}
|
|
|
|
addr = object_property_get_int(OBJECT(dimm), PC_DIMM_ADDR_PROP, &local_err);
|
|
if (local_err) {
|
|
pc_dimm_memory_unplug(dev, &ms->hotplug_memory, mr);
|
|
goto out;
|
|
}
|
|
|
|
spapr_add_lmbs(dev, addr, size, node,
|
|
spapr_ovec_test(ms->ov5_cas, OV5_HP_EVT),
|
|
&error_abort);
|
|
|
|
out:
|
|
error_propagate(errp, local_err);
|
|
}
|
|
|
|
typedef struct sPAPRDIMMState {
|
|
uint32_t nr_lmbs;
|
|
} sPAPRDIMMState;
|
|
|
|
static void spapr_lmb_release(DeviceState *dev, void *opaque)
|
|
{
|
|
sPAPRDIMMState *ds = (sPAPRDIMMState *)opaque;
|
|
HotplugHandler *hotplug_ctrl;
|
|
|
|
if (--ds->nr_lmbs) {
|
|
return;
|
|
}
|
|
|
|
g_free(ds);
|
|
|
|
/*
|
|
* Now that all the LMBs have been removed by the guest, call the
|
|
* pc-dimm unplug handler to cleanup up the pc-dimm device.
|
|
*/
|
|
hotplug_ctrl = qdev_get_hotplug_handler(dev);
|
|
hotplug_handler_unplug(hotplug_ctrl, dev, &error_abort);
|
|
}
|
|
|
|
static void spapr_del_lmbs(DeviceState *dev, uint64_t addr_start, uint64_t size,
|
|
Error **errp)
|
|
{
|
|
sPAPRDRConnector *drc;
|
|
sPAPRDRConnectorClass *drck;
|
|
uint32_t nr_lmbs = size / SPAPR_MEMORY_BLOCK_SIZE;
|
|
int i;
|
|
sPAPRDIMMState *ds = g_malloc0(sizeof(sPAPRDIMMState));
|
|
uint64_t addr = addr_start;
|
|
|
|
ds->nr_lmbs = nr_lmbs;
|
|
for (i = 0; i < nr_lmbs; i++) {
|
|
drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB,
|
|
addr / SPAPR_MEMORY_BLOCK_SIZE);
|
|
g_assert(drc);
|
|
|
|
drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
|
|
drck->detach(drc, dev, spapr_lmb_release, ds, errp);
|
|
addr += SPAPR_MEMORY_BLOCK_SIZE;
|
|
}
|
|
|
|
drc = spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_LMB,
|
|
addr_start / SPAPR_MEMORY_BLOCK_SIZE);
|
|
drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
|
|
spapr_hotplug_req_remove_by_count_indexed(SPAPR_DR_CONNECTOR_TYPE_LMB,
|
|
nr_lmbs,
|
|
drck->get_index(drc));
|
|
}
|
|
|
|
static void spapr_memory_unplug(HotplugHandler *hotplug_dev, DeviceState *dev,
|
|
Error **errp)
|
|
{
|
|
sPAPRMachineState *ms = SPAPR_MACHINE(hotplug_dev);
|
|
PCDIMMDevice *dimm = PC_DIMM(dev);
|
|
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
|
|
MemoryRegion *mr = ddc->get_memory_region(dimm);
|
|
|
|
pc_dimm_memory_unplug(dev, &ms->hotplug_memory, mr);
|
|
object_unparent(OBJECT(dev));
|
|
}
|
|
|
|
static void spapr_memory_unplug_request(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
Error *local_err = NULL;
|
|
PCDIMMDevice *dimm = PC_DIMM(dev);
|
|
PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm);
|
|
MemoryRegion *mr = ddc->get_memory_region(dimm);
|
|
uint64_t size = memory_region_size(mr);
|
|
uint64_t addr;
|
|
|
|
addr = object_property_get_int(OBJECT(dimm), PC_DIMM_ADDR_PROP, &local_err);
|
|
if (local_err) {
|
|
goto out;
|
|
}
|
|
|
|
spapr_del_lmbs(dev, addr, size, &error_abort);
|
|
out:
|
|
error_propagate(errp, local_err);
|
|
}
|
|
|
|
void *spapr_populate_hotplug_cpu_dt(CPUState *cs, int *fdt_offset,
|
|
sPAPRMachineState *spapr)
|
|
{
|
|
PowerPCCPU *cpu = POWERPC_CPU(cs);
|
|
DeviceClass *dc = DEVICE_GET_CLASS(cs);
|
|
int id = ppc_get_vcpu_dt_id(cpu);
|
|
void *fdt;
|
|
int offset, fdt_size;
|
|
char *nodename;
|
|
|
|
fdt = create_device_tree(&fdt_size);
|
|
nodename = g_strdup_printf("%s@%x", dc->fw_name, id);
|
|
offset = fdt_add_subnode(fdt, 0, nodename);
|
|
|
|
spapr_populate_cpu_dt(cs, fdt, offset, spapr);
|
|
g_free(nodename);
|
|
|
|
*fdt_offset = offset;
|
|
return fdt;
|
|
}
|
|
|
|
static void spapr_machine_device_plug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_GET_CLASS(qdev_get_machine());
|
|
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
|
|
int node;
|
|
|
|
if (!smc->dr_lmb_enabled) {
|
|
error_setg(errp, "Memory hotplug not supported for this machine");
|
|
return;
|
|
}
|
|
node = object_property_get_int(OBJECT(dev), PC_DIMM_NODE_PROP, errp);
|
|
if (*errp) {
|
|
return;
|
|
}
|
|
if (node < 0 || node >= MAX_NODES) {
|
|
error_setg(errp, "Invaild node %d", node);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Currently PowerPC kernel doesn't allow hot-adding memory to
|
|
* memory-less node, but instead will silently add the memory
|
|
* to the first node that has some memory. This causes two
|
|
* unexpected behaviours for the user.
|
|
*
|
|
* - Memory gets hotplugged to a different node than what the user
|
|
* specified.
|
|
* - Since pc-dimm subsystem in QEMU still thinks that memory belongs
|
|
* to memory-less node, a reboot will set things accordingly
|
|
* and the previously hotplugged memory now ends in the right node.
|
|
* This appears as if some memory moved from one node to another.
|
|
*
|
|
* So until kernel starts supporting memory hotplug to memory-less
|
|
* nodes, just prevent such attempts upfront in QEMU.
|
|
*/
|
|
if (nb_numa_nodes && !numa_info[node].node_mem) {
|
|
error_setg(errp, "Can't hotplug memory to memory-less node %d",
|
|
node);
|
|
return;
|
|
}
|
|
|
|
spapr_memory_plug(hotplug_dev, dev, node, errp);
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_SPAPR_CPU_CORE)) {
|
|
spapr_core_plug(hotplug_dev, dev, errp);
|
|
}
|
|
}
|
|
|
|
static void spapr_machine_device_unplug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
sPAPRMachineState *sms = SPAPR_MACHINE(qdev_get_machine());
|
|
MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine());
|
|
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
|
|
if (spapr_ovec_test(sms->ov5_cas, OV5_HP_EVT)) {
|
|
spapr_memory_unplug(hotplug_dev, dev, errp);
|
|
} else {
|
|
error_setg(errp, "Memory hot unplug not supported for this guest");
|
|
}
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_SPAPR_CPU_CORE)) {
|
|
if (!mc->query_hotpluggable_cpus) {
|
|
error_setg(errp, "CPU hot unplug not supported on this machine");
|
|
return;
|
|
}
|
|
spapr_core_unplug(hotplug_dev, dev, errp);
|
|
}
|
|
}
|
|
|
|
static void spapr_machine_device_unplug_request(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
sPAPRMachineState *sms = SPAPR_MACHINE(qdev_get_machine());
|
|
MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine());
|
|
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
|
|
if (spapr_ovec_test(sms->ov5_cas, OV5_HP_EVT)) {
|
|
spapr_memory_unplug_request(hotplug_dev, dev, errp);
|
|
} else {
|
|
/* NOTE: this means there is a window after guest reset, prior to
|
|
* CAS negotiation, where unplug requests will fail due to the
|
|
* capability not being detected yet. This is a bit different than
|
|
* the case with PCI unplug, where the events will be queued and
|
|
* eventually handled by the guest after boot
|
|
*/
|
|
error_setg(errp, "Memory hot unplug not supported for this guest");
|
|
}
|
|
} else if (object_dynamic_cast(OBJECT(dev), TYPE_SPAPR_CPU_CORE)) {
|
|
if (!mc->query_hotpluggable_cpus) {
|
|
error_setg(errp, "CPU hot unplug not supported on this machine");
|
|
return;
|
|
}
|
|
spapr_core_unplug(hotplug_dev, dev, errp);
|
|
}
|
|
}
|
|
|
|
static void spapr_machine_device_pre_plug(HotplugHandler *hotplug_dev,
|
|
DeviceState *dev, Error **errp)
|
|
{
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_SPAPR_CPU_CORE)) {
|
|
spapr_core_pre_plug(hotplug_dev, dev, errp);
|
|
}
|
|
}
|
|
|
|
static HotplugHandler *spapr_get_hotplug_handler(MachineState *machine,
|
|
DeviceState *dev)
|
|
{
|
|
if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) ||
|
|
object_dynamic_cast(OBJECT(dev), TYPE_SPAPR_CPU_CORE)) {
|
|
return HOTPLUG_HANDLER(machine);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static unsigned spapr_cpu_index_to_socket_id(unsigned cpu_index)
|
|
{
|
|
/* Allocate to NUMA nodes on a "socket" basis (not that concept of
|
|
* socket means much for the paravirtualized PAPR platform) */
|
|
return cpu_index / smp_threads / smp_cores;
|
|
}
|
|
|
|
static HotpluggableCPUList *spapr_query_hotpluggable_cpus(MachineState *machine)
|
|
{
|
|
int i;
|
|
HotpluggableCPUList *head = NULL;
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(machine);
|
|
int spapr_max_cores = max_cpus / smp_threads;
|
|
|
|
for (i = 0; i < spapr_max_cores; i++) {
|
|
HotpluggableCPUList *list_item = g_new0(typeof(*list_item), 1);
|
|
HotpluggableCPU *cpu_item = g_new0(typeof(*cpu_item), 1);
|
|
CpuInstanceProperties *cpu_props = g_new0(typeof(*cpu_props), 1);
|
|
|
|
cpu_item->type = spapr_get_cpu_core_type(machine->cpu_model);
|
|
cpu_item->vcpus_count = smp_threads;
|
|
cpu_props->has_core_id = true;
|
|
cpu_props->core_id = i * smp_threads;
|
|
/* TODO: add 'has_node/node' here to describe
|
|
to which node core belongs */
|
|
|
|
cpu_item->props = cpu_props;
|
|
if (spapr->cores[i]) {
|
|
cpu_item->has_qom_path = true;
|
|
cpu_item->qom_path = object_get_canonical_path(spapr->cores[i]);
|
|
}
|
|
list_item->value = cpu_item;
|
|
list_item->next = head;
|
|
head = list_item;
|
|
}
|
|
return head;
|
|
}
|
|
|
|
static void spapr_phb_placement(sPAPRMachineState *spapr, uint32_t index,
|
|
uint64_t *buid, hwaddr *pio,
|
|
hwaddr *mmio32, hwaddr *mmio64,
|
|
unsigned n_dma, uint32_t *liobns, Error **errp)
|
|
{
|
|
/*
|
|
* New-style PHB window placement.
|
|
*
|
|
* Goals: Gives large (1TiB), naturally aligned 64-bit MMIO window
|
|
* for each PHB, in addition to 2GiB 32-bit MMIO and 64kiB PIO
|
|
* windows.
|
|
*
|
|
* Some guest kernels can't work with MMIO windows above 1<<46
|
|
* (64TiB), so we place up to 31 PHBs in the area 32TiB..64TiB
|
|
*
|
|
* 32TiB..(33TiB+1984kiB) contains the 64kiB PIO windows for each
|
|
* PHB stacked together. (32TiB+2GiB)..(32TiB+64GiB) contains the
|
|
* 2GiB 32-bit MMIO windows for each PHB. Then 33..64TiB has the
|
|
* 1TiB 64-bit MMIO windows for each PHB.
|
|
*/
|
|
const uint64_t base_buid = 0x800000020000000ULL;
|
|
const int max_phbs =
|
|
(SPAPR_PCI_LIMIT - SPAPR_PCI_BASE) / SPAPR_PCI_MEM64_WIN_SIZE - 1;
|
|
int i;
|
|
|
|
/* Sanity check natural alignments */
|
|
QEMU_BUILD_BUG_ON((SPAPR_PCI_BASE % SPAPR_PCI_MEM64_WIN_SIZE) != 0);
|
|
QEMU_BUILD_BUG_ON((SPAPR_PCI_LIMIT % SPAPR_PCI_MEM64_WIN_SIZE) != 0);
|
|
QEMU_BUILD_BUG_ON((SPAPR_PCI_MEM64_WIN_SIZE % SPAPR_PCI_MEM32_WIN_SIZE) != 0);
|
|
QEMU_BUILD_BUG_ON((SPAPR_PCI_MEM32_WIN_SIZE % SPAPR_PCI_IO_WIN_SIZE) != 0);
|
|
/* Sanity check bounds */
|
|
QEMU_BUILD_BUG_ON((max_phbs * SPAPR_PCI_IO_WIN_SIZE) > SPAPR_PCI_MEM32_WIN_SIZE);
|
|
QEMU_BUILD_BUG_ON((max_phbs * SPAPR_PCI_MEM32_WIN_SIZE) > SPAPR_PCI_MEM64_WIN_SIZE);
|
|
|
|
if (index >= max_phbs) {
|
|
error_setg(errp, "\"index\" for PAPR PHB is too large (max %u)",
|
|
max_phbs - 1);
|
|
return;
|
|
}
|
|
|
|
*buid = base_buid + index;
|
|
for (i = 0; i < n_dma; ++i) {
|
|
liobns[i] = SPAPR_PCI_LIOBN(index, i);
|
|
}
|
|
|
|
*pio = SPAPR_PCI_BASE + index * SPAPR_PCI_IO_WIN_SIZE;
|
|
*mmio32 = SPAPR_PCI_BASE + (index + 1) * SPAPR_PCI_MEM32_WIN_SIZE;
|
|
*mmio64 = SPAPR_PCI_BASE + (index + 1) * SPAPR_PCI_MEM64_WIN_SIZE;
|
|
}
|
|
|
|
static void spapr_machine_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(oc);
|
|
FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(oc);
|
|
NMIClass *nc = NMI_CLASS(oc);
|
|
HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
|
|
|
|
mc->desc = "pSeries Logical Partition (PAPR compliant)";
|
|
|
|
/*
|
|
* We set up the default / latest behaviour here. The class_init
|
|
* functions for the specific versioned machine types can override
|
|
* these details for backwards compatibility
|
|
*/
|
|
mc->init = ppc_spapr_init;
|
|
mc->reset = ppc_spapr_reset;
|
|
mc->block_default_type = IF_SCSI;
|
|
mc->max_cpus = 255;
|
|
mc->no_parallel = 1;
|
|
mc->default_boot_order = "";
|
|
mc->default_ram_size = 512 * M_BYTE;
|
|
mc->kvm_type = spapr_kvm_type;
|
|
mc->has_dynamic_sysbus = true;
|
|
mc->pci_allow_0_address = true;
|
|
mc->get_hotplug_handler = spapr_get_hotplug_handler;
|
|
hc->pre_plug = spapr_machine_device_pre_plug;
|
|
hc->plug = spapr_machine_device_plug;
|
|
hc->unplug = spapr_machine_device_unplug;
|
|
mc->cpu_index_to_socket_id = spapr_cpu_index_to_socket_id;
|
|
hc->unplug_request = spapr_machine_device_unplug_request;
|
|
|
|
smc->dr_lmb_enabled = true;
|
|
smc->tcg_default_cpu = "POWER8";
|
|
mc->query_hotpluggable_cpus = spapr_query_hotpluggable_cpus;
|
|
fwc->get_dev_path = spapr_get_fw_dev_path;
|
|
nc->nmi_monitor_handler = spapr_nmi;
|
|
smc->phb_placement = spapr_phb_placement;
|
|
}
|
|
|
|
static const TypeInfo spapr_machine_info = {
|
|
.name = TYPE_SPAPR_MACHINE,
|
|
.parent = TYPE_MACHINE,
|
|
.abstract = true,
|
|
.instance_size = sizeof(sPAPRMachineState),
|
|
.instance_init = spapr_machine_initfn,
|
|
.instance_finalize = spapr_machine_finalizefn,
|
|
.class_size = sizeof(sPAPRMachineClass),
|
|
.class_init = spapr_machine_class_init,
|
|
.interfaces = (InterfaceInfo[]) {
|
|
{ TYPE_FW_PATH_PROVIDER },
|
|
{ TYPE_NMI },
|
|
{ TYPE_HOTPLUG_HANDLER },
|
|
{ }
|
|
},
|
|
};
|
|
|
|
#define DEFINE_SPAPR_MACHINE(suffix, verstr, latest) \
|
|
static void spapr_machine_##suffix##_class_init(ObjectClass *oc, \
|
|
void *data) \
|
|
{ \
|
|
MachineClass *mc = MACHINE_CLASS(oc); \
|
|
spapr_machine_##suffix##_class_options(mc); \
|
|
if (latest) { \
|
|
mc->alias = "pseries"; \
|
|
mc->is_default = 1; \
|
|
} \
|
|
} \
|
|
static void spapr_machine_##suffix##_instance_init(Object *obj) \
|
|
{ \
|
|
MachineState *machine = MACHINE(obj); \
|
|
spapr_machine_##suffix##_instance_options(machine); \
|
|
} \
|
|
static const TypeInfo spapr_machine_##suffix##_info = { \
|
|
.name = MACHINE_TYPE_NAME("pseries-" verstr), \
|
|
.parent = TYPE_SPAPR_MACHINE, \
|
|
.class_init = spapr_machine_##suffix##_class_init, \
|
|
.instance_init = spapr_machine_##suffix##_instance_init, \
|
|
}; \
|
|
static void spapr_machine_register_##suffix(void) \
|
|
{ \
|
|
type_register(&spapr_machine_##suffix##_info); \
|
|
} \
|
|
type_init(spapr_machine_register_##suffix)
|
|
|
|
/*
|
|
* pseries-2.8
|
|
*/
|
|
static void spapr_machine_2_8_instance_options(MachineState *machine)
|
|
{
|
|
}
|
|
|
|
static void spapr_machine_2_8_class_options(MachineClass *mc)
|
|
{
|
|
/* Defaults for the latest behaviour inherited from the base class */
|
|
}
|
|
|
|
DEFINE_SPAPR_MACHINE(2_8, "2.8", true);
|
|
|
|
/*
|
|
* pseries-2.7
|
|
*/
|
|
#define SPAPR_COMPAT_2_7 \
|
|
HW_COMPAT_2_7 \
|
|
{ \
|
|
.driver = TYPE_SPAPR_PCI_HOST_BRIDGE, \
|
|
.property = "mem_win_size", \
|
|
.value = stringify(SPAPR_PCI_2_7_MMIO_WIN_SIZE),\
|
|
}, \
|
|
{ \
|
|
.driver = TYPE_SPAPR_PCI_HOST_BRIDGE, \
|
|
.property = "mem64_win_size", \
|
|
.value = "0", \
|
|
}, \
|
|
{ \
|
|
.driver = TYPE_POWERPC_CPU, \
|
|
.property = "pre-2.8-migration", \
|
|
.value = "on", \
|
|
}, \
|
|
{ \
|
|
.driver = TYPE_SPAPR_PCI_HOST_BRIDGE, \
|
|
.property = "pre-2.8-migration", \
|
|
.value = "on", \
|
|
},
|
|
|
|
static void phb_placement_2_7(sPAPRMachineState *spapr, uint32_t index,
|
|
uint64_t *buid, hwaddr *pio,
|
|
hwaddr *mmio32, hwaddr *mmio64,
|
|
unsigned n_dma, uint32_t *liobns, Error **errp)
|
|
{
|
|
/* Legacy PHB placement for pseries-2.7 and earlier machine types */
|
|
const uint64_t base_buid = 0x800000020000000ULL;
|
|
const hwaddr phb_spacing = 0x1000000000ULL; /* 64 GiB */
|
|
const hwaddr mmio_offset = 0xa0000000; /* 2 GiB + 512 MiB */
|
|
const hwaddr pio_offset = 0x80000000; /* 2 GiB */
|
|
const uint32_t max_index = 255;
|
|
const hwaddr phb0_alignment = 0x10000000000ULL; /* 1 TiB */
|
|
|
|
uint64_t ram_top = MACHINE(spapr)->ram_size;
|
|
hwaddr phb0_base, phb_base;
|
|
int i;
|
|
|
|
/* Do we have hotpluggable memory? */
|
|
if (MACHINE(spapr)->maxram_size > ram_top) {
|
|
/* Can't just use maxram_size, because there may be an
|
|
* alignment gap between normal and hotpluggable memory
|
|
* regions */
|
|
ram_top = spapr->hotplug_memory.base +
|
|
memory_region_size(&spapr->hotplug_memory.mr);
|
|
}
|
|
|
|
phb0_base = QEMU_ALIGN_UP(ram_top, phb0_alignment);
|
|
|
|
if (index > max_index) {
|
|
error_setg(errp, "\"index\" for PAPR PHB is too large (max %u)",
|
|
max_index);
|
|
return;
|
|
}
|
|
|
|
*buid = base_buid + index;
|
|
for (i = 0; i < n_dma; ++i) {
|
|
liobns[i] = SPAPR_PCI_LIOBN(index, i);
|
|
}
|
|
|
|
phb_base = phb0_base + index * phb_spacing;
|
|
*pio = phb_base + pio_offset;
|
|
*mmio32 = phb_base + mmio_offset;
|
|
/*
|
|
* We don't set the 64-bit MMIO window, relying on the PHB's
|
|
* fallback behaviour of automatically splitting a large "32-bit"
|
|
* window into contiguous 32-bit and 64-bit windows
|
|
*/
|
|
}
|
|
|
|
static void spapr_machine_2_7_instance_options(MachineState *machine)
|
|
{
|
|
sPAPRMachineState *spapr = SPAPR_MACHINE(machine);
|
|
|
|
spapr_machine_2_8_instance_options(machine);
|
|
spapr->use_hotplug_event_source = false;
|
|
}
|
|
|
|
static void spapr_machine_2_7_class_options(MachineClass *mc)
|
|
{
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(mc);
|
|
|
|
spapr_machine_2_8_class_options(mc);
|
|
smc->tcg_default_cpu = "POWER7";
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_7);
|
|
smc->phb_placement = phb_placement_2_7;
|
|
}
|
|
|
|
DEFINE_SPAPR_MACHINE(2_7, "2.7", false);
|
|
|
|
/*
|
|
* pseries-2.6
|
|
*/
|
|
#define SPAPR_COMPAT_2_6 \
|
|
HW_COMPAT_2_6 \
|
|
{ \
|
|
.driver = TYPE_SPAPR_PCI_HOST_BRIDGE,\
|
|
.property = "ddw",\
|
|
.value = stringify(off),\
|
|
},
|
|
|
|
static void spapr_machine_2_6_instance_options(MachineState *machine)
|
|
{
|
|
spapr_machine_2_7_instance_options(machine);
|
|
}
|
|
|
|
static void spapr_machine_2_6_class_options(MachineClass *mc)
|
|
{
|
|
spapr_machine_2_7_class_options(mc);
|
|
mc->query_hotpluggable_cpus = NULL;
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_6);
|
|
}
|
|
|
|
DEFINE_SPAPR_MACHINE(2_6, "2.6", false);
|
|
|
|
/*
|
|
* pseries-2.5
|
|
*/
|
|
#define SPAPR_COMPAT_2_5 \
|
|
HW_COMPAT_2_5 \
|
|
{ \
|
|
.driver = "spapr-vlan", \
|
|
.property = "use-rx-buffer-pools", \
|
|
.value = "off", \
|
|
},
|
|
|
|
static void spapr_machine_2_5_instance_options(MachineState *machine)
|
|
{
|
|
spapr_machine_2_6_instance_options(machine);
|
|
}
|
|
|
|
static void spapr_machine_2_5_class_options(MachineClass *mc)
|
|
{
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(mc);
|
|
|
|
spapr_machine_2_6_class_options(mc);
|
|
smc->use_ohci_by_default = true;
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_5);
|
|
}
|
|
|
|
DEFINE_SPAPR_MACHINE(2_5, "2.5", false);
|
|
|
|
/*
|
|
* pseries-2.4
|
|
*/
|
|
#define SPAPR_COMPAT_2_4 \
|
|
HW_COMPAT_2_4
|
|
|
|
static void spapr_machine_2_4_instance_options(MachineState *machine)
|
|
{
|
|
spapr_machine_2_5_instance_options(machine);
|
|
}
|
|
|
|
static void spapr_machine_2_4_class_options(MachineClass *mc)
|
|
{
|
|
sPAPRMachineClass *smc = SPAPR_MACHINE_CLASS(mc);
|
|
|
|
spapr_machine_2_5_class_options(mc);
|
|
smc->dr_lmb_enabled = false;
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_4);
|
|
}
|
|
|
|
DEFINE_SPAPR_MACHINE(2_4, "2.4", false);
|
|
|
|
/*
|
|
* pseries-2.3
|
|
*/
|
|
#define SPAPR_COMPAT_2_3 \
|
|
HW_COMPAT_2_3 \
|
|
{\
|
|
.driver = "spapr-pci-host-bridge",\
|
|
.property = "dynamic-reconfiguration",\
|
|
.value = "off",\
|
|
},
|
|
|
|
static void spapr_machine_2_3_instance_options(MachineState *machine)
|
|
{
|
|
spapr_machine_2_4_instance_options(machine);
|
|
savevm_skip_section_footers();
|
|
global_state_set_optional();
|
|
savevm_skip_configuration();
|
|
}
|
|
|
|
static void spapr_machine_2_3_class_options(MachineClass *mc)
|
|
{
|
|
spapr_machine_2_4_class_options(mc);
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_3);
|
|
}
|
|
DEFINE_SPAPR_MACHINE(2_3, "2.3", false);
|
|
|
|
/*
|
|
* pseries-2.2
|
|
*/
|
|
|
|
#define SPAPR_COMPAT_2_2 \
|
|
HW_COMPAT_2_2 \
|
|
{\
|
|
.driver = TYPE_SPAPR_PCI_HOST_BRIDGE,\
|
|
.property = "mem_win_size",\
|
|
.value = "0x20000000",\
|
|
},
|
|
|
|
static void spapr_machine_2_2_instance_options(MachineState *machine)
|
|
{
|
|
spapr_machine_2_3_instance_options(machine);
|
|
machine->suppress_vmdesc = true;
|
|
}
|
|
|
|
static void spapr_machine_2_2_class_options(MachineClass *mc)
|
|
{
|
|
spapr_machine_2_3_class_options(mc);
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_2);
|
|
}
|
|
DEFINE_SPAPR_MACHINE(2_2, "2.2", false);
|
|
|
|
/*
|
|
* pseries-2.1
|
|
*/
|
|
#define SPAPR_COMPAT_2_1 \
|
|
HW_COMPAT_2_1
|
|
|
|
static void spapr_machine_2_1_instance_options(MachineState *machine)
|
|
{
|
|
spapr_machine_2_2_instance_options(machine);
|
|
}
|
|
|
|
static void spapr_machine_2_1_class_options(MachineClass *mc)
|
|
{
|
|
spapr_machine_2_2_class_options(mc);
|
|
SET_MACHINE_COMPAT(mc, SPAPR_COMPAT_2_1);
|
|
}
|
|
DEFINE_SPAPR_MACHINE(2_1, "2.1", false);
|
|
|
|
static void spapr_machine_register_types(void)
|
|
{
|
|
type_register_static(&spapr_machine_info);
|
|
}
|
|
|
|
type_init(spapr_machine_register_types)
|