This is the seabios update for qemu 2.11. Well, almost, seabios is in
freeze for the upcoming 1.11 release. This updates seabios to current
git master snapshot, and it will be updated again to 1.11 final before
the 2.11 release.
With this two-step seabios gets some more wide testing before the actual
release and the update to 1.11 final (which will most likely happen
after qemu freeze) should have bugfix patches only.
git shortlog
============
Aleksandr Bezzubikov (3):
pci: refactor pci_find_capapibilty to get bdf as the first argument instead of the whole pci_device
pci: add QEMU-specific PCI capability structure
pci: enable RedHat PCI bridges to reserve additional resources on PCI init
Ben Warren (5):
QEMU DMA: Add DMA write capability
romfile-loader: Switch to using named structs
QEMU fw_cfg: Add command to write back address of file
QEMU fw_cfg: Add functions for accessing files by key
QEMU fw_cfg: Write fw_cfg back on S3 resume
Daniel Verkamp (5):
nvme: support NVMe 1.0 controllers
nvme: extend command timeout to 5 seconds
nvme: fix reversed loop condition in cmd_readwrite
nvme: fix extraction of status code bits
nvme: fix copy-paste mistake in comment
Filippo Sironi (1):
nvme: Use the Maximum Queue Entries Supported (MQES) to initialize I/O queues
Gerd Hoffmann (7):
usb: add hub portmap
usb-xhci: use hub portmap
std: add cp437 to unicode map
kbd: make enqueue_key public, add ascii_to_keycode
romfile: add support for constant files.
paravirt: serial console configuration.
add serial console support
Igor Mammedov (1):
drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS
Jason Wang (1):
virtio: IOMMU support
Julian Stecklina (2):
block: add NVMe boot support
nvme: fix out of memory behavior
Julius Werner (1):
coreboot: Adapt to upstream CBMEM console changes
Kevin O'Connor (26):
usb: Make usb_time_sigatt variable static
tpm: Add comment banners to tcg.c separating major parts of spec
tpm: Don't call tpm_set_failure() from tpm12_get_capability()
tpm: Move code around in tcgbios.c to keep like code together
acpi: Generalize find_fadt() and find_tcpa_by_rsdp() into find_acpi_table()
tpm: Don't call tpm_build_and_send_cmd() from tpm20_stirrandom()
tpm: Rework tpm_build_and_send_cmd() into tpm_simple_cmd()
ps2port: Disable keyboard/mouse prior to resetting ps2 controller
docs: Note release dates for 1.10.1 and 1.10.2
resume: Don't attempt to use generic reboot mechanisms on QEMU
boot: Increase description size in boot menu
src: Minor - remove tab characters that slipped into SeaBIOS C code
NVMe: Allow NVMe to be enabled on real hardware
smm: Backup and restore A20 on an SMI based mode switch
stacks: Make sure to initialize Call16Data
stacks: Don't update the A20 settings if they haven't changed
stacks: There is no need to disable NMI if it is already disabled
vga: Fix bug in stdvga_get_linesize()
docs: Fix typos in Memory_Model.md
tcgbios: Fix use of unitialized variable
boot: Rename drive_g to drive
disk: Don't require the 'struct drive_s' to be in the f-segment
block: Rename disk_op_s->drive_gf to drive_fl
virtio: Allocate drive_s storage in low memory
xhci: Build TRBs directly in xhci_trb_queue()
xhci: Verify the device is still present in xhci_cmd_submit()
Ladi Prosek (1):
ahci: Set upper 32-bit registers to zero
Patrick Rudolph (4):
SeaVGABios/cbvga: Advertise correct pixel format
SeaVGABIOS/vbe: Query driver for scanline pitch v2
SeaVGABios/cbvga: Use active mode to clear screen
SeaVGABios/cbvga: Advertise compatible VESA modes
Paul Menzel (1):
vgasrc: Increase debug level
Petr Berky (1):
config: Add function to check if fw_cfg exists
Ricardo Ribalda Delgado (1):
serialio: Support for mmap serial ports
Roman Kagan (11):
blockcmd: accept only disks and CD-ROMs
blockcmd: generic SCSI luns enumeration
virtio-scsi: enumerate luns with REPORT LUNS
esp-scsi: enumerate luns with REPORT LUNS
usb-uas: enumerate luns with REPORT LUNS
pvscsi: fix the comment about lun enumeration
mpt-scsi: try to enumerate luns with REPORT LUNS
lsi-scsi: reset in case of a serious problem
lsi-scsi: try to enumerate luns with REPORT LUNS
blockcmd: start REPORT_LUNS with the smallest buffer
Revert "lsi-scsi: reset in case of a serious problem"
Stefan Berger (1):
tpm: Log TPM 2 digest structure in little endian format
Youness Alaoui (1):
nvme: Enable NVMe support for non-qemu hardware
Zeh, Werner (1):
ahci: Disable Native Command Queueing
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- SeaBIOS (bios.bin) is the successor of pc bios.
See http://www.seabios.org/ for more information.
- The VGA BIOS and the Cirrus VGA BIOS come from the LGPL VGA bios
project (http://www.nongnu.org/vgabios/).
- The PowerPC Open Hack'Ware Open Firmware Compatible BIOS is
available at http://repo.or.cz/w/openhackware.git.
- OpenBIOS (http://www.openbios.org/) is a free (GPL v2) portable
firmware implementation. The goal is to implement a 100% IEEE
1275-1994 (referred to as Open Firmware) compliant firmware.
The included images for PowerPC (for 32 and 64 bit PPC CPUs),
Sparc32 (including QEMU,tcx.bin and QEMU,cgthree.bin) and Sparc64 are built
from OpenBIOS SVN revision 1280.
- SLOF (Slimline Open Firmware) is a free IEEE 1275 Open Firmware
implementation for certain IBM POWER hardware. The sources are at
https://github.com/aik/SLOF, and the image currently in qemu is
built from git tag qemu-slof-20170724.
- sgabios (the Serial Graphics Adapter option ROM) provides a means for
legacy x86 software to communicate with an attached serial console as
if a video card were attached. The master sources reside in a subversion
repository at http://sgabios.googlecode.com/svn/trunk. A git mirror is
available at git://git.qemu-project.org/sgabios.git.
- The PXE roms come from the iPXE project. Built with BANNER_TIME 0.
Sources available at http://ipxe.org. Vendor:Device ID -> ROM mapping:
8086:100e -> pxe-e1000.rom
8086:1209 -> pxe-eepro100.rom
1050:0940 -> pxe-ne2k_pci.rom
1022:2000 -> pxe-pcnet.rom
10ec:8139 -> pxe-rtl8139.rom
1af4:1000 -> pxe-virtio.rom
- The sources for the Alpha palcode image is available from:
git://github.com/rth7680/qemu-palcode.git
- The u-boot binary for e500 comes from the upstream denx u-boot project where
it was compiled using the qemu-ppce500 target.
A git mirror is available at: git://git.qemu-project.org/u-boot.git
The hash used to compile the current version is: 2072e72
- Skiboot (https://github.com/open-power/skiboot/) is an OPAL
(OpenPower Abstraction Layer) firmware for OpenPOWER systems. It can
run an hypervisor OS or simply a host OS on the "baremetal"
platform, also known as the PowerNV (Non-Virtualized) platform.
- QemuMacDrivers (https://github.com/ozbenh/QemuMacDrivers) is a project to
provide virtualised drivers for PPC MacOS guests.
083fab0290
