qemu/hw/intc
Thomas Huth 1ddc9b98c3 hw/intc/exynos4210_gic: Turn instance_init into realize function
The instance_init function of the "exynos4210.gic" device creates a
new "arm_gic" device and immediately realizes it with qdev_init_nofail().
This will leave a lot of object in the QOM tree during introspection of
the "exynos4210.gic" device, e.g. reproducible by starting QEMU like this:

qemu-system-aarch64 -M none -nodefaults -nographic -monitor stdio

And then by running "info qom-tree" at the HMP monitor, followed by
"device_add exynos4210.gic,help" and finally checking "info qom-tree"
again.

Also note that qdev_init_nofail() can exit QEMU in case of errors - and
this must never happen during an instance_init function, otherwise QEMU
could terminate unexpectedly during introspection of a device.

Since most of the code that follows the qdev_init_nofail() depends on
the realized "gicbusdev", the easiest solution to the problem is to
turn the whole instance_init function into a realize function instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1532337784-334-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-23 15:21:27 +01:00
..
allwinner-a10-pic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
apic_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
apic.c apic: add function to apic that will be used by hvf 2017-12-22 15:01:19 +01:00
arm_gic_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
arm_gic_kvm.c target/arm: Allow KVM device address overwriting 2018-06-22 13:28:35 +01:00
arm_gic.c hw/intc/arm_gic: Fix handling of GICD_ITARGETSR 2018-07-16 17:18:41 +01:00
arm_gicv2m.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
arm_gicv3_common.c hw/intc/arm_gicv3: Introduce redist-region-count array property 2018-06-22 13:28:36 +01:00
arm_gicv3_cpuif.c hw/intc/arm_gicv3: Fix APxR<n> register dispatching 2018-05-31 14:50:51 +01:00
arm_gicv3_dist.c hw/intc/arm_gicv3: fix an extra left-shift when reading IPRIORITYR 2018-06-22 13:28:34 +01:00
arm_gicv3_its_common.c hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI 2018-01-11 13:25:40 +00:00
arm_gicv3_its_kvm.c target/arm: Allow KVM device address overwriting 2018-06-22 13:28:35 +01:00
arm_gicv3_kvm.c hw/intc/arm_gicv3_kvm: Get prepared to handle multiple redist regions 2018-06-22 13:28:36 +01:00
arm_gicv3_redist.c hw/intc/arm_gicv3: fix an extra left-shift when reading IPRIORITYR 2018-06-22 13:28:34 +01:00
arm_gicv3.c hw/intc/arm_gicv3: Introduce redist-region-count array property 2018-06-22 13:28:36 +01:00
armv7m_nvic.c hw/arm/armv7: Fix crash when introspecting the "iotkit" device 2018-07-17 13:12:49 +01:00
aspeed_vic.c hw: Clean up includes 2016-06-07 18:19:23 +03:00
bcm2835_ic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
bcm2836_control.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
etraxfs_pic.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
exynos4210_combiner.c hw/intc: QOM'ify exynos4210_combiner.c 2016-05-12 13:22:24 +01:00
exynos4210_gic.c hw/intc/exynos4210_gic: Turn instance_init into realize function 2018-07-23 15:21:27 +01:00
gic_internal.h arm: gic: Remove references to NVIC 2017-02-28 12:08:17 +00:00
gicv3_internal.h target-arm: Add GICv3CPUState in CPUARMState struct 2017-02-28 17:10:00 +00:00
grlib_irqmp.c sparc/leon3 irqmp: fix IRQ software ack 2018-01-24 19:19:50 +00:00
heathrow_pic.c heathrow: remove obsolete heathow_init() function 2018-04-27 18:05:22 +10:00
i8259_common.c i8259: move TYPE_INTERRUPT_STATS_PROVIDER upper 2017-12-21 09:30:32 +01:00
i8259.c qdev: use device_class_set_parent_realize/unrealize/reset() 2018-02-05 13:54:38 +01:00
imx_avic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
imx_gpcv2.c i.MX: Add code to emulate GPCv2 IP block 2018-02-09 10:40:30 +00:00
intc.c intc: add an interface to gather statistics/informations on interrupt controllers 2016-10-04 10:00:25 +02:00
ioapic_common.c ioapic: support "info irq" 2018-06-28 19:05:37 +02:00
ioapic.c ioapic: remove useless lower bounds check 2018-07-06 18:39:19 +02:00
lm32_pic.c misc: drop old i386 dependency 2017-12-18 17:07:03 +03:00
Makefile.objs i.MX: Add code to emulate GPCv2 IP block 2018-02-09 10:40:30 +00:00
mips_gic.c hw/mips_gic: Update pin state on mask changes 2017-02-21 22:24:58 +00:00
nios2_iic.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
omap_intc.c Replace all occurances of __FUNCTION__ with __func__ 2018-01-22 09:46:18 +01:00
ompic.c openrisc/ompic: Add OpenRISC Multicore PIC (OMPIC) 2017-10-21 06:35:47 +09:00
openpic_kvm.c openpic_kvm: drop address_space_to_flatview call 2018-03-06 14:01:27 +01:00
openpic.c openpic: move OpenPIC state and related definitions to openpic.h 2018-03-06 13:16:29 +11:00
pl190.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
puv3_intc.c unicore: Clean up includes 2016-01-29 15:07:22 +00:00
realview_gic.c hw/*/realview: Fix introspection problem with 'realview_mpcore' & 'realview_gic' 2018-07-17 13:12:49 +01:00
s390_flic_kvm.c s390x/kvm: cache the kvm flic in a central function 2018-02-09 09:37:13 +01:00
s390_flic.c qmp: expose s390-specific CPU info 2018-02-26 12:55:26 +01:00
sh_intc.c hw: explicitly include qemu-common.h and cpu.h 2016-03-22 22:20:17 +01:00
slavio_intctl.c sun4m: remove include/hw/sparc/sun4m.h and all references to it 2018-01-09 21:48:20 +00:00
trace-events heathrow: convert to trace-events 2018-03-06 13:16:29 +11:00
vgic_common.h intc/gic: Extract some reusable vGIC code 2015-09-24 01:29:36 +01:00
xics_kvm.c ppc/xics: rework the ICS classes inheritance tree 2018-07-03 09:56:51 +10:00
xics_pnv.c ppc/xics: introduce ICP DeviceRealize and DeviceReset handlers 2018-07-03 09:56:51 +10:00
xics_spapr.c Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
xics.c ppc/xics: fix ICP reset path 2018-07-16 11:18:09 +10:00
xilinx_intc.c hw/intc: Clean up includes 2016-01-29 15:07:24 +00:00
xlnx-pmu-iomod-intc.c xlnx-pmu-iomod-intc: Add the PMU Interrupt controller 2018-01-26 11:09:09 +01:00
xlnx-zynqmp-ipi.c xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device 2018-01-26 11:09:09 +01:00