017aa60b25
This test boots a Linux kernel on a smdkc210 board and verify the serial output is working. The cpio image used comes from the linux-build-test project: https://github.com/groeck/linux-build-test If ARM is a target being built, "make check-acceptance" will automatically include this test by the use of the "arch:arm" tags. This test can be run using: $ IGNORE_AVOCADO_CONSOLE_BUG=yes \ avocado --show=app,console run -t machine:smdkc210 \ tests/acceptance/boot_linux_console.py console: Booting Linux on physical CPU 0x900 console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20) console: CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d console: CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache console: OF: fdt: Machine model: Samsung smdkv310 evaluation board based on Exynos4210 [...] console: Samsung CPU ID: 0x43210211 console: random: get_random_bytes called from start_kernel+0xa0/0x504 with crng_init=0 console: percpu: Embedded 17 pages/cpu s39756 r8192 d21684 u69632 console: Built 1 zonelists, mobility grouping on. Total pages: 249152 console: Kernel command line: printk.time=0 console=ttySAC0,115200n8 earlyprintk random.trust_cpu=off cryptomgr.notests cpuidle.off=1 panic=-1 noreboot [...] console: L2C: platform modifies aux control register: 0x02020000 -> 0x3e420001 console: L2C: platform provided aux values permit register corruption. console: L2C: DT/platform modifies aux control register: 0x02020000 -> 0x3e420001 console: L2C-310 erratum 769419 enabled console: L2C-310 enabling early BRESP for Cortex-A9 console: L2C-310: enabling full line of zeros but not enabled in Cortex-A9 console: L2C-310 ID prefetch enabled, offset 1 lines console: L2C-310 dynamic clock gating disabled, standby mode disabled console: L2C-310 cache controller enabled, 8 ways, 128 kB console: L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e420001 console: Exynos4210 clocks: sclk_apll = 12000000, sclk_mpll = 12000000 console: sclk_epll = 12000000, sclk_vpll = 12000000, arm_clk = 12000000 [...] console: s3c-i2c 13860000.i2c: slave address 0x00 console: s3c-i2c 13860000.i2c: bus frequency set to 93 KHz console: s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter [...] console: dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-241330 console: dma-pl330 12680000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 console: dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-241330 console: dma-pl330 12690000.pdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 console: dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-241330 console: dma-pl330 12850000.mdma: DBUFF-256x8bytes Num_Chans-8 Num_Peri-1 Num_Events-16 console: dma-pl330 12850000.mdma: PM domain LCD0 will not be powered off console: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled console: Serial: AMBA driver console: 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 40, base_baud = 0) is a S3C6400/10 console: console [ttySAC0] enabled console: 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 41, base_baud = 0) is a S3C6400/10 console: 13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 42, base_baud = 0) is a S3C6400/10 console: 13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 43, base_baud = 0) is a S3C6400/10 [...] console: Freeing unused kernel memory: 2048K console: Run /init as init process console: mount: mounting devtmpfs on /dev failed: Device or resource busy console: Starting logging: OK console: Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read) console: done. console: Starting network: OK console: Found console ttySAC0 console: Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u1 (2019-09-20) console: Boot successful. PASS (37.98 s) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20191028073441.6448-25-philmd@redhat.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> [Cleber: removed conditional to skip test] Signed-off-by: Cleber Rosa <crosa@redhat.com>
434 lines
18 KiB
Python
434 lines
18 KiB
Python
# Functional test that boots a Linux kernel and checks the console
|
|
#
|
|
# Copyright (c) 2018 Red Hat, Inc.
|
|
#
|
|
# Author:
|
|
# Cleber Rosa <crosa@redhat.com>
|
|
#
|
|
# This work is licensed under the terms of the GNU GPL, version 2 or
|
|
# later. See the COPYING file in the top-level directory.
|
|
|
|
import os
|
|
import lzma
|
|
import gzip
|
|
import shutil
|
|
|
|
from avocado_qemu import Test
|
|
from avocado_qemu import exec_command_and_wait_for_pattern
|
|
from avocado_qemu import wait_for_console_pattern
|
|
from avocado.utils import process
|
|
from avocado.utils import archive
|
|
|
|
|
|
class BootLinuxConsole(Test):
|
|
"""
|
|
Boots a Linux kernel and checks that the console is operational and the
|
|
kernel command line is properly passed from QEMU to the kernel
|
|
"""
|
|
|
|
timeout = 90
|
|
|
|
KERNEL_COMMON_COMMAND_LINE = 'printk.time=0 '
|
|
|
|
def wait_for_console_pattern(self, success_message):
|
|
wait_for_console_pattern(self, success_message,
|
|
failure_message='Kernel panic - not syncing')
|
|
|
|
def extract_from_deb(self, deb, path):
|
|
"""
|
|
Extracts a file from a deb package into the test workdir
|
|
|
|
:param deb: path to the deb archive
|
|
:param file: path within the deb archive of the file to be extracted
|
|
:returns: path of the extracted file
|
|
"""
|
|
cwd = os.getcwd()
|
|
os.chdir(self.workdir)
|
|
file_path = process.run("ar t %s" % deb).stdout_text.split()[2]
|
|
process.run("ar x %s %s" % (deb, file_path))
|
|
archive.extract(file_path, self.workdir)
|
|
os.chdir(cwd)
|
|
return self.workdir + path
|
|
|
|
def test_x86_64_pc(self):
|
|
"""
|
|
:avocado: tags=arch:x86_64
|
|
:avocado: tags=machine:pc
|
|
"""
|
|
kernel_url = ('https://archives.fedoraproject.org/pub/archive/fedora'
|
|
'/linux/releases/29/Everything/x86_64/os/images/pxeboot'
|
|
'/vmlinuz')
|
|
kernel_hash = '23bebd2680757891cf7adedb033532163a792495'
|
|
kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
|
|
|
|
self.vm.set_machine('pc')
|
|
self.vm.set_console()
|
|
kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'console=ttyS0'
|
|
self.vm.add_args('-kernel', kernel_path,
|
|
'-append', kernel_command_line)
|
|
self.vm.launch()
|
|
console_pattern = 'Kernel command line: %s' % kernel_command_line
|
|
self.wait_for_console_pattern(console_pattern)
|
|
|
|
def test_mips_malta(self):
|
|
"""
|
|
:avocado: tags=arch:mips
|
|
:avocado: tags=machine:malta
|
|
:avocado: tags=endian:big
|
|
"""
|
|
deb_url = ('http://snapshot.debian.org/archive/debian/'
|
|
'20130217T032700Z/pool/main/l/linux-2.6/'
|
|
'linux-image-2.6.32-5-4kc-malta_2.6.32-48_mips.deb')
|
|
deb_hash = 'a8cfc28ad8f45f54811fc6cf74fc43ffcfe0ba04'
|
|
deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
|
|
kernel_path = self.extract_from_deb(deb_path,
|
|
'/boot/vmlinux-2.6.32-5-4kc-malta')
|
|
|
|
self.vm.set_machine('malta')
|
|
self.vm.set_console()
|
|
kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'console=ttyS0'
|
|
self.vm.add_args('-kernel', kernel_path,
|
|
'-append', kernel_command_line)
|
|
self.vm.launch()
|
|
console_pattern = 'Kernel command line: %s' % kernel_command_line
|
|
self.wait_for_console_pattern(console_pattern)
|
|
|
|
def test_mips64el_malta(self):
|
|
"""
|
|
This test requires the ar tool to extract "data.tar.gz" from
|
|
the Debian package.
|
|
|
|
The kernel can be rebuilt using this Debian kernel source [1] and
|
|
following the instructions on [2].
|
|
|
|
[1] http://snapshot.debian.org/package/linux-2.6/2.6.32-48/
|
|
#linux-source-2.6.32_2.6.32-48
|
|
[2] https://kernel-team.pages.debian.net/kernel-handbook/
|
|
ch-common-tasks.html#s-common-official
|
|
|
|
:avocado: tags=arch:mips64el
|
|
:avocado: tags=machine:malta
|
|
"""
|
|
deb_url = ('http://snapshot.debian.org/archive/debian/'
|
|
'20130217T032700Z/pool/main/l/linux-2.6/'
|
|
'linux-image-2.6.32-5-5kc-malta_2.6.32-48_mipsel.deb')
|
|
deb_hash = '1aaec92083bf22fda31e0d27fa8d9a388e5fc3d5'
|
|
deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
|
|
kernel_path = self.extract_from_deb(deb_path,
|
|
'/boot/vmlinux-2.6.32-5-5kc-malta')
|
|
|
|
self.vm.set_machine('malta')
|
|
self.vm.set_console()
|
|
kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'console=ttyS0'
|
|
self.vm.add_args('-kernel', kernel_path,
|
|
'-append', kernel_command_line)
|
|
self.vm.launch()
|
|
console_pattern = 'Kernel command line: %s' % kernel_command_line
|
|
self.wait_for_console_pattern(console_pattern)
|
|
|
|
def test_mips_malta_cpio(self):
|
|
"""
|
|
:avocado: tags=arch:mips
|
|
:avocado: tags=machine:malta
|
|
:avocado: tags=endian:big
|
|
"""
|
|
deb_url = ('http://snapshot.debian.org/archive/debian/'
|
|
'20160601T041800Z/pool/main/l/linux/'
|
|
'linux-image-4.5.0-2-4kc-malta_4.5.5-1_mips.deb')
|
|
deb_hash = 'a3c84f3e88b54e06107d65a410d1d1e8e0f340f8'
|
|
deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
|
|
kernel_path = self.extract_from_deb(deb_path,
|
|
'/boot/vmlinux-4.5.0-2-4kc-malta')
|
|
initrd_url = ('https://github.com/groeck/linux-build-test/raw/'
|
|
'8584a59ed9e5eb5ee7ca91f6d74bbb06619205b8/rootfs/'
|
|
'mips/rootfs.cpio.gz')
|
|
initrd_hash = 'bf806e17009360a866bf537f6de66590de349a99'
|
|
initrd_path_gz = self.fetch_asset(initrd_url, asset_hash=initrd_hash)
|
|
initrd_path = self.workdir + "rootfs.cpio"
|
|
archive.gzip_uncompress(initrd_path_gz, initrd_path)
|
|
|
|
self.vm.set_machine('malta')
|
|
self.vm.set_console()
|
|
kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE
|
|
+ 'console=ttyS0 console=tty '
|
|
+ 'rdinit=/sbin/init noreboot')
|
|
self.vm.add_args('-kernel', kernel_path,
|
|
'-initrd', initrd_path,
|
|
'-append', kernel_command_line,
|
|
'-no-reboot')
|
|
self.vm.launch()
|
|
self.wait_for_console_pattern('Boot successful.')
|
|
|
|
exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo',
|
|
'BogoMIPS')
|
|
exec_command_and_wait_for_pattern(self, 'uname -a',
|
|
'Debian')
|
|
exec_command_and_wait_for_pattern(self, 'reboot',
|
|
'reboot: Restarting system')
|
|
|
|
def do_test_mips_malta32el_nanomips(self, kernel_url, kernel_hash):
|
|
kernel_path_xz = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
|
|
kernel_path = self.workdir + "kernel"
|
|
with lzma.open(kernel_path_xz, 'rb') as f_in:
|
|
with open(kernel_path, 'wb') as f_out:
|
|
shutil.copyfileobj(f_in, f_out)
|
|
|
|
self.vm.set_machine('malta')
|
|
self.vm.set_console()
|
|
kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE
|
|
+ 'mem=256m@@0x0 '
|
|
+ 'console=ttyS0')
|
|
self.vm.add_args('-no-reboot',
|
|
'-cpu', 'I7200',
|
|
'-kernel', kernel_path,
|
|
'-append', kernel_command_line)
|
|
self.vm.launch()
|
|
console_pattern = 'Kernel command line: %s' % kernel_command_line
|
|
self.wait_for_console_pattern(console_pattern)
|
|
|
|
def test_mips_malta32el_nanomips_4k(self):
|
|
"""
|
|
:avocado: tags=arch:mipsel
|
|
:avocado: tags=machine:malta
|
|
:avocado: tags=endian:little
|
|
"""
|
|
kernel_url = ('https://mipsdistros.mips.com/LinuxDistro/nanomips/'
|
|
'kernels/v4.15.18-432-gb2eb9a8b07a1-20180627102142/'
|
|
'generic_nano32r6el_page4k.xz')
|
|
kernel_hash = '477456aafd2a0f1ddc9482727f20fe9575565dd6'
|
|
self.do_test_mips_malta32el_nanomips(kernel_url, kernel_hash)
|
|
|
|
def test_mips_malta32el_nanomips_16k_up(self):
|
|
"""
|
|
:avocado: tags=arch:mipsel
|
|
:avocado: tags=machine:malta
|
|
:avocado: tags=endian:little
|
|
"""
|
|
kernel_url = ('https://mipsdistros.mips.com/LinuxDistro/nanomips/'
|
|
'kernels/v4.15.18-432-gb2eb9a8b07a1-20180627102142/'
|
|
'generic_nano32r6el_page16k_up.xz')
|
|
kernel_hash = 'e882868f944c71c816e832e2303b7874d044a7bc'
|
|
self.do_test_mips_malta32el_nanomips(kernel_url, kernel_hash)
|
|
|
|
def test_mips_malta32el_nanomips_64k_dbg(self):
|
|
"""
|
|
:avocado: tags=arch:mipsel
|
|
:avocado: tags=machine:malta
|
|
:avocado: tags=endian:little
|
|
"""
|
|
kernel_url = ('https://mipsdistros.mips.com/LinuxDistro/nanomips/'
|
|
'kernels/v4.15.18-432-gb2eb9a8b07a1-20180627102142/'
|
|
'generic_nano32r6el_page64k_dbg.xz')
|
|
kernel_hash = '18d1c68f2e23429e266ca39ba5349ccd0aeb7180'
|
|
self.do_test_mips_malta32el_nanomips(kernel_url, kernel_hash)
|
|
|
|
def test_aarch64_virt(self):
|
|
"""
|
|
:avocado: tags=arch:aarch64
|
|
:avocado: tags=machine:virt
|
|
"""
|
|
kernel_url = ('https://archives.fedoraproject.org/pub/archive/fedora'
|
|
'/linux/releases/29/Everything/aarch64/os/images/pxeboot'
|
|
'/vmlinuz')
|
|
kernel_hash = '8c73e469fc6ea06a58dc83a628fc695b693b8493'
|
|
kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
|
|
|
|
self.vm.set_machine('virt')
|
|
self.vm.set_console()
|
|
kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
|
|
'console=ttyAMA0')
|
|
self.vm.add_args('-cpu', 'cortex-a53',
|
|
'-kernel', kernel_path,
|
|
'-append', kernel_command_line)
|
|
self.vm.launch()
|
|
console_pattern = 'Kernel command line: %s' % kernel_command_line
|
|
self.wait_for_console_pattern(console_pattern)
|
|
|
|
def test_arm_virt(self):
|
|
"""
|
|
:avocado: tags=arch:arm
|
|
:avocado: tags=machine:virt
|
|
"""
|
|
kernel_url = ('https://archives.fedoraproject.org/pub/archive/fedora'
|
|
'/linux/releases/29/Everything/armhfp/os/images/pxeboot'
|
|
'/vmlinuz')
|
|
kernel_hash = 'e9826d741b4fb04cadba8d4824d1ed3b7fb8b4d4'
|
|
kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
|
|
|
|
self.vm.set_machine('virt')
|
|
self.vm.set_console()
|
|
kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
|
|
'console=ttyAMA0')
|
|
self.vm.add_args('-kernel', kernel_path,
|
|
'-append', kernel_command_line)
|
|
self.vm.launch()
|
|
console_pattern = 'Kernel command line: %s' % kernel_command_line
|
|
self.wait_for_console_pattern(console_pattern)
|
|
|
|
def test_arm_emcraft_sf2(self):
|
|
"""
|
|
:avocado: tags=arch:arm
|
|
:avocado: tags=machine:emcraft_sf2
|
|
:avocado: tags=endian:little
|
|
"""
|
|
uboot_url = ('https://raw.githubusercontent.com/'
|
|
'Subbaraya-Sundeep/qemu-test-binaries/'
|
|
'fa030bd77a014a0b8e360d3b7011df89283a2f0b/u-boot')
|
|
uboot_hash = 'abba5d9c24cdd2d49cdc2a8aa92976cf20737eff'
|
|
uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash)
|
|
spi_url = ('https://raw.githubusercontent.com/'
|
|
'Subbaraya-Sundeep/qemu-test-binaries/'
|
|
'fa030bd77a014a0b8e360d3b7011df89283a2f0b/spi.bin')
|
|
spi_hash = '85f698329d38de63aea6e884a86fbde70890a78a'
|
|
spi_path = self.fetch_asset(spi_url, asset_hash=spi_hash)
|
|
|
|
self.vm.set_machine('emcraft-sf2')
|
|
self.vm.set_console()
|
|
kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE
|
|
self.vm.add_args('-kernel', uboot_path,
|
|
'-append', kernel_command_line,
|
|
'-drive', 'file=' + spi_path + ',if=mtd,format=raw',
|
|
'-no-reboot')
|
|
self.vm.launch()
|
|
self.wait_for_console_pattern('init started: BusyBox')
|
|
|
|
def do_test_arm_raspi2(self, uart_id):
|
|
"""
|
|
The kernel can be rebuilt using the kernel source referenced
|
|
and following the instructions on the on:
|
|
https://www.raspberrypi.org/documentation/linux/kernel/building.md
|
|
"""
|
|
serial_kernel_cmdline = {
|
|
0: 'earlycon=pl011,0x3f201000 console=ttyAMA0',
|
|
}
|
|
deb_url = ('http://archive.raspberrypi.org/debian/'
|
|
'pool/main/r/raspberrypi-firmware/'
|
|
'raspberrypi-kernel_1.20190215-1_armhf.deb')
|
|
deb_hash = 'cd284220b32128c5084037553db3c482426f3972'
|
|
deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
|
|
kernel_path = self.extract_from_deb(deb_path, '/boot/kernel7.img')
|
|
dtb_path = self.extract_from_deb(deb_path, '/boot/bcm2709-rpi-2-b.dtb')
|
|
|
|
self.vm.set_machine('raspi2')
|
|
self.vm.set_console()
|
|
kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
|
|
serial_kernel_cmdline[uart_id])
|
|
self.vm.add_args('-kernel', kernel_path,
|
|
'-dtb', dtb_path,
|
|
'-append', kernel_command_line)
|
|
self.vm.launch()
|
|
console_pattern = 'Kernel command line: %s' % kernel_command_line
|
|
self.wait_for_console_pattern(console_pattern)
|
|
|
|
def test_arm_raspi2_uart0(self):
|
|
"""
|
|
:avocado: tags=arch:arm
|
|
:avocado: tags=machine:raspi2
|
|
:avocado: tags=device:pl011
|
|
"""
|
|
self.do_test_arm_raspi2(0)
|
|
|
|
def test_arm_exynos4210_initrd(self):
|
|
"""
|
|
:avocado: tags=arch:arm
|
|
:avocado: tags=machine:smdkc210
|
|
"""
|
|
deb_url = ('https://snapshot.debian.org/archive/debian/'
|
|
'20190928T224601Z/pool/main/l/linux/'
|
|
'linux-image-4.19.0-6-armmp_4.19.67-2+deb10u1_armhf.deb')
|
|
deb_hash = 'fa9df4a0d38936cb50084838f2cb933f570d7d82'
|
|
deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
|
|
kernel_path = self.extract_from_deb(deb_path,
|
|
'/boot/vmlinuz-4.19.0-6-armmp')
|
|
dtb_path = '/usr/lib/linux-image-4.19.0-6-armmp/exynos4210-smdkv310.dtb'
|
|
dtb_path = self.extract_from_deb(deb_path, dtb_path)
|
|
|
|
initrd_url = ('https://github.com/groeck/linux-build-test/raw/'
|
|
'2eb0a73b5d5a28df3170c546ddaaa9757e1e0848/rootfs/'
|
|
'arm/rootfs-armv5.cpio.gz')
|
|
initrd_hash = '2b50f1873e113523967806f4da2afe385462ff9b'
|
|
initrd_path_gz = self.fetch_asset(initrd_url, asset_hash=initrd_hash)
|
|
initrd_path = os.path.join(self.workdir, 'rootfs.cpio')
|
|
archive.gzip_uncompress(initrd_path_gz, initrd_path)
|
|
|
|
self.vm.set_machine('smdkc210')
|
|
self.vm.set_console()
|
|
kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
|
|
'earlycon=exynos4210,0x13800000 earlyprintk ' +
|
|
'console=ttySAC0,115200n8 ' +
|
|
'random.trust_cpu=off cryptomgr.notests ' +
|
|
'cpuidle.off=1 panic=-1 noreboot')
|
|
|
|
self.vm.add_args('-kernel', kernel_path,
|
|
'-dtb', dtb_path,
|
|
'-initrd', initrd_path,
|
|
'-append', kernel_command_line,
|
|
'-no-reboot')
|
|
self.vm.launch()
|
|
|
|
self.wait_for_console_pattern('Boot successful.')
|
|
# TODO user command, for now the uart is stuck
|
|
|
|
def test_s390x_s390_ccw_virtio(self):
|
|
"""
|
|
:avocado: tags=arch:s390x
|
|
:avocado: tags=machine:s390_ccw_virtio
|
|
"""
|
|
kernel_url = ('https://archives.fedoraproject.org/pub/archive'
|
|
'/fedora-secondary/releases/29/Everything/s390x/os/images'
|
|
'/kernel.img')
|
|
kernel_hash = 'e8e8439103ef8053418ef062644ffd46a7919313'
|
|
kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
|
|
|
|
self.vm.set_machine('s390-ccw-virtio')
|
|
self.vm.set_console()
|
|
kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'console=sclp0'
|
|
self.vm.add_args('-nodefaults',
|
|
'-kernel', kernel_path,
|
|
'-append', kernel_command_line)
|
|
self.vm.launch()
|
|
console_pattern = 'Kernel command line: %s' % kernel_command_line
|
|
self.wait_for_console_pattern(console_pattern)
|
|
|
|
def test_alpha_clipper(self):
|
|
"""
|
|
:avocado: tags=arch:alpha
|
|
:avocado: tags=machine:clipper
|
|
"""
|
|
kernel_url = ('http://archive.debian.org/debian/dists/lenny/main/'
|
|
'installer-alpha/current/images/cdrom/vmlinuz')
|
|
kernel_hash = '3a943149335529e2ed3e74d0d787b85fb5671ba3'
|
|
kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
|
|
|
|
uncompressed_kernel = archive.uncompress(kernel_path, self.workdir)
|
|
|
|
self.vm.set_machine('clipper')
|
|
self.vm.set_console()
|
|
kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'console=ttyS0'
|
|
self.vm.add_args('-vga', 'std',
|
|
'-kernel', uncompressed_kernel,
|
|
'-append', kernel_command_line)
|
|
self.vm.launch()
|
|
console_pattern = 'Kernel command line: %s' % kernel_command_line
|
|
self.wait_for_console_pattern(console_pattern)
|
|
|
|
def test_ppc64_pseries(self):
|
|
"""
|
|
:avocado: tags=arch:ppc64
|
|
:avocado: tags=machine:pseries
|
|
"""
|
|
kernel_url = ('https://archives.fedoraproject.org/pub/archive'
|
|
'/fedora-secondary/releases/29/Everything/ppc64le/os'
|
|
'/ppc/ppc64/vmlinuz')
|
|
kernel_hash = '3fe04abfc852b66653b8c3c897a59a689270bc77'
|
|
kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
|
|
|
|
self.vm.set_machine('pseries')
|
|
self.vm.set_console()
|
|
kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'console=hvc0'
|
|
self.vm.add_args('-kernel', kernel_path,
|
|
'-append', kernel_command_line)
|
|
self.vm.launch()
|
|
console_pattern = 'Kernel command line: %s' % kernel_command_line
|
|
self.wait_for_console_pattern(console_pattern)
|