7e6b5497ea
hw/char/serial currently contains the implementation of both TYPE_SERIAL and TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's move the latter into its own module which makes the dependencies more obvious and the code more tidy. The includes and the dependencies have been converted mechanically except in the hw/char directories which were updated manually. The result was compile-tested. Now, only hw/char makes direct use of TYPE_SERIAL: # grep -r -e "select SERIAL" | grep -v SERIAL_ hw/char/Kconfig: select SERIAL hw/char/Kconfig: select SERIAL hw/char/Kconfig: select SERIAL hw/char/Kconfig: select SERIAL hw/char/Kconfig: select SERIAL # grep -r -e "/serial\\.h" include/hw/char/serial-mm.h:#include "hw/char/serial.h" hw/char/serial-pci-multi.c:#include "hw/char/serial.h" hw/char/serial.c:#include "hw/char/serial.h" hw/char/serial-isa.c:#include "hw/char/serial.h" hw/char/serial-pci.c:#include "hw/char/serial.h" Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
143 lines
4.6 KiB
C
143 lines
4.6 KiB
C
/*
|
|
* KZM Board System emulation.
|
|
*
|
|
* Copyright (c) 2008 OKL and 2011 NICTA
|
|
* Written by Hans at OK-Labs
|
|
* Updated by Peter Chubb.
|
|
*
|
|
* This code is licensed under the GPL, version 2 or later.
|
|
* See the file `COPYING' in the top level directory.
|
|
*
|
|
* It (partially) emulates a Kyoto Microcomputer
|
|
* KZM-ARM11-01 evaluation board, with a Freescale
|
|
* i.MX31 SoC
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qapi/error.h"
|
|
#include "hw/arm/fsl-imx31.h"
|
|
#include "hw/arm/boot.h"
|
|
#include "hw/boards.h"
|
|
#include "qemu/error-report.h"
|
|
#include "exec/address-spaces.h"
|
|
#include "net/net.h"
|
|
#include "hw/net/lan9118.h"
|
|
#include "hw/char/serial-mm.h"
|
|
#include "sysemu/qtest.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "qemu/cutils.h"
|
|
|
|
/* Memory map for Kzm Emulation Baseboard:
|
|
* 0x00000000-0x7fffffff See i.MX31 SOC for support
|
|
* 0x80000000-0x8fffffff RAM EMULATED
|
|
* 0x90000000-0x9fffffff RAM EMULATED
|
|
* 0xa0000000-0xafffffff Flash IGNORED
|
|
* 0xb0000000-0xb3ffffff Unavailable IGNORED
|
|
* 0xb4000000-0xb4000fff 8-bit free space IGNORED
|
|
* 0xb4001000-0xb400100f Board control IGNORED
|
|
* 0xb4001003 DIP switch
|
|
* 0xb4001010-0xb400101f 7-segment LED IGNORED
|
|
* 0xb4001020-0xb400102f LED IGNORED
|
|
* 0xb4001030-0xb400103f LED IGNORED
|
|
* 0xb4001040-0xb400104f FPGA, UART EMULATED
|
|
* 0xb4001050-0xb400105f FPGA, UART EMULATED
|
|
* 0xb4001060-0xb40fffff FPGA IGNORED
|
|
* 0xb6000000-0xb61fffff LAN controller EMULATED
|
|
* 0xb6200000-0xb62fffff FPGA NAND Controller IGNORED
|
|
* 0xb6300000-0xb7ffffff Free IGNORED
|
|
* 0xb8000000-0xb8004fff Memory control registers IGNORED
|
|
* 0xc0000000-0xc3ffffff PCMCIA/CF IGNORED
|
|
* 0xc4000000-0xffffffff Reserved IGNORED
|
|
*/
|
|
|
|
typedef struct IMX31KZM {
|
|
FslIMX31State soc;
|
|
MemoryRegion ram_alias;
|
|
} IMX31KZM;
|
|
|
|
#define KZM_RAM_ADDR (FSL_IMX31_SDRAM0_ADDR)
|
|
#define KZM_FPGA_ADDR (FSL_IMX31_CS4_ADDR + 0x1040)
|
|
#define KZM_LAN9118_ADDR (FSL_IMX31_CS5_ADDR)
|
|
|
|
static struct arm_boot_info kzm_binfo = {
|
|
.loader_start = KZM_RAM_ADDR,
|
|
.board_id = 1722,
|
|
};
|
|
|
|
static void kzm_init(MachineState *machine)
|
|
{
|
|
IMX31KZM *s = g_new0(IMX31KZM, 1);
|
|
unsigned int ram_size;
|
|
unsigned int alias_offset;
|
|
unsigned int i;
|
|
|
|
object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_FSL_IMX31);
|
|
|
|
qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
|
|
|
|
/* Check the amount of memory is compatible with the SOC */
|
|
if (machine->ram_size > (FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE)) {
|
|
char *sz = size_to_str(FSL_IMX31_SDRAM0_SIZE + FSL_IMX31_SDRAM1_SIZE);
|
|
error_report("RAM size more than %s is not supported", sz);
|
|
g_free(sz);
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
|
|
memory_region_add_subregion(get_system_memory(), FSL_IMX31_SDRAM0_ADDR,
|
|
machine->ram);
|
|
|
|
/* initialize the alias memory if any */
|
|
for (i = 0, ram_size = machine->ram_size, alias_offset = 0;
|
|
(i < 2) && ram_size; i++) {
|
|
unsigned int size;
|
|
static const struct {
|
|
hwaddr addr;
|
|
unsigned int size;
|
|
} ram[2] = {
|
|
{ FSL_IMX31_SDRAM0_ADDR, FSL_IMX31_SDRAM0_SIZE },
|
|
{ FSL_IMX31_SDRAM1_ADDR, FSL_IMX31_SDRAM1_SIZE },
|
|
};
|
|
|
|
size = MIN(ram_size, ram[i].size);
|
|
|
|
ram_size -= size;
|
|
|
|
if (size < ram[i].size) {
|
|
memory_region_init_alias(&s->ram_alias, NULL, "ram.alias",
|
|
machine->ram,
|
|
alias_offset, ram[i].size - size);
|
|
memory_region_add_subregion(get_system_memory(),
|
|
ram[i].addr + size, &s->ram_alias);
|
|
}
|
|
|
|
alias_offset += ram[i].size;
|
|
}
|
|
|
|
if (qemu_find_nic_info("lan9118", true, NULL)) {
|
|
lan9118_init(KZM_LAN9118_ADDR,
|
|
qdev_get_gpio_in(DEVICE(&s->soc.avic), 52));
|
|
}
|
|
|
|
if (serial_hd(2)) { /* touchscreen */
|
|
serial_mm_init(get_system_memory(), KZM_FPGA_ADDR+0x10, 0,
|
|
qdev_get_gpio_in(DEVICE(&s->soc.avic), 52),
|
|
14745600, serial_hd(2), DEVICE_NATIVE_ENDIAN);
|
|
}
|
|
|
|
kzm_binfo.ram_size = machine->ram_size;
|
|
|
|
if (!qtest_enabled()) {
|
|
arm_load_kernel(&s->soc.cpu, machine, &kzm_binfo);
|
|
}
|
|
}
|
|
|
|
static void kzm_machine_init(MachineClass *mc)
|
|
{
|
|
mc->desc = "ARM KZM Emulation Baseboard (ARM1136)";
|
|
mc->init = kzm_init;
|
|
mc->ignore_memory_transaction_failures = true;
|
|
mc->default_ram_id = "kzm.ram";
|
|
}
|
|
|
|
DEFINE_MACHINE("kzm", kzm_machine_init)
|