/* * QTest testcase for migration * * Copyright (c) 2016-2018 Red Hat, Inc. and/or its affiliates * based on the vhost-user-test.c that is: * Copyright (c) 2014 Virtual Open Systems Sarl. * * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. * */ #include "qemu/osdep.h" #include "libqtest.h" #include "qapi/error.h" #include "qapi/qmp/qdict.h" #include "qemu/module.h" #include "qemu/option.h" #include "qemu/range.h" #include "qemu/sockets.h" #include "chardev/char.h" #include "qapi/qapi-visit-sockets.h" #include "qapi/qobject-input-visitor.h" #include "qapi/qobject-output-visitor.h" #include "crypto/tlscredspsk.h" #include "qapi/qmp/qlist.h" #include "migration-helpers.h" #include "tests/migration/migration-test.h" #ifdef CONFIG_GNUTLS # include "tests/unit/crypto-tls-psk-helpers.h" # ifdef CONFIG_TASN1 # include "tests/unit/crypto-tls-x509-helpers.h" # endif /* CONFIG_TASN1 */ #endif /* CONFIG_GNUTLS */ /* For dirty ring test; so far only x86_64 is supported */ #if defined(__linux__) && defined(HOST_X86_64) #include "linux/kvm.h" #endif /* TODO actually test the results and get rid of this */ #define qtest_qmp_discard_response(...) qobject_unref(qtest_qmp(__VA_ARGS__)) unsigned start_address; unsigned end_address; static bool uffd_feature_thread_id; /* * Dirtylimit stop working if dirty page rate error * value less than DIRTYLIMIT_TOLERANCE_RANGE */ #define DIRTYLIMIT_TOLERANCE_RANGE 25 /* MB/s */ #if defined(__linux__) #include #include #endif #if defined(__linux__) && defined(__NR_userfaultfd) && defined(CONFIG_EVENTFD) #include #include #include "qemu/userfaultfd.h" static bool ufd_version_check(void) { struct uffdio_api api_struct; uint64_t ioctl_mask; int ufd = uffd_open(O_CLOEXEC); if (ufd == -1) { g_test_message("Skipping test: userfaultfd not available"); return false; } api_struct.api = UFFD_API; api_struct.features = 0; if (ioctl(ufd, UFFDIO_API, &api_struct)) { g_test_message("Skipping test: UFFDIO_API failed"); return false; } uffd_feature_thread_id = api_struct.features & UFFD_FEATURE_THREAD_ID; ioctl_mask = (__u64)1 << _UFFDIO_REGISTER | (__u64)1 << _UFFDIO_UNREGISTER; if ((api_struct.ioctls & ioctl_mask) != ioctl_mask) { g_test_message("Skipping test: Missing userfault feature"); return false; } return true; } #else static bool ufd_version_check(void) { g_test_message("Skipping test: Userfault not available (builtdtime)"); return false; } #endif static char *tmpfs; /* The boot file modifies memory area in [start_address, end_address) * repeatedly. It outputs a 'B' at a fixed rate while it's still running. */ #include "tests/migration/i386/a-b-bootblock.h" #include "tests/migration/aarch64/a-b-kernel.h" #include "tests/migration/s390x/a-b-bios.h" static void init_bootfile(const char *bootpath, void *content, size_t len) { FILE *bootfile = fopen(bootpath, "wb"); g_assert_cmpint(fwrite(content, len, 1, bootfile), ==, 1); fclose(bootfile); } /* * Wait for some output in the serial output file, * we get an 'A' followed by an endless string of 'B's * but on the destination we won't have the A. */ static void wait_for_serial(const char *side) { g_autofree char *serialpath = g_strdup_printf("%s/%s", tmpfs, side); FILE *serialfile = fopen(serialpath, "r"); const char *arch = qtest_get_arch(); int started = (strcmp(side, "src_serial") == 0 && strcmp(arch, "ppc64") == 0) ? 0 : 1; do { int readvalue = fgetc(serialfile); if (!started) { /* SLOF prints its banner before starting test, * to ignore it, mark the start of the test with '_', * ignore all characters until this marker */ switch (readvalue) { case '_': started = 1; break; case EOF: fseek(serialfile, 0, SEEK_SET); usleep(1000); break; } continue; } switch (readvalue) { case 'A': /* Fine */ break; case 'B': /* It's alive! */ fclose(serialfile); return; case EOF: started = (strcmp(side, "src_serial") == 0 && strcmp(arch, "ppc64") == 0) ? 0 : 1; fseek(serialfile, 0, SEEK_SET); usleep(1000); break; default: fprintf(stderr, "Unexpected %d on %s serial\n", readvalue, side); g_assert_not_reached(); } } while (true); } /* * It's tricky to use qemu's migration event capability with qtest, * events suddenly appearing confuse the qmp()/hmp() responses. */ static int64_t read_ram_property_int(QTestState *who, const char *property) { QDict *rsp_return, *rsp_ram; int64_t result; rsp_return = migrate_query_not_failed(who); if (!qdict_haskey(rsp_return, "ram")) { /* Still in setup */ result = 0; } else { rsp_ram = qdict_get_qdict(rsp_return, "ram"); result = qdict_get_try_int(rsp_ram, property, 0); } qobject_unref(rsp_return); return result; } static int64_t read_migrate_property_int(QTestState *who, const char *property) { QDict *rsp_return; int64_t result; rsp_return = migrate_query_not_failed(who); result = qdict_get_try_int(rsp_return, property, 0); qobject_unref(rsp_return); return result; } static uint64_t get_migration_pass(QTestState *who) { return read_ram_property_int(who, "dirty-sync-count"); } static void read_blocktime(QTestState *who) { QDict *rsp_return; rsp_return = migrate_query_not_failed(who); g_assert(qdict_haskey(rsp_return, "postcopy-blocktime")); qobject_unref(rsp_return); } static void wait_for_migration_pass(QTestState *who) { uint64_t initial_pass = get_migration_pass(who); uint64_t pass; /* Wait for the 1st sync */ while (!got_stop && !initial_pass) { usleep(1000); initial_pass = get_migration_pass(who); } do { usleep(1000); pass = get_migration_pass(who); } while (pass == initial_pass && !got_stop); } static void check_guests_ram(QTestState *who) { /* Our ASM test will have been incrementing one byte from each page from * start_address to < end_address in order. This gives us a constraint * that any page's byte should be equal or less than the previous pages * byte (mod 256); and they should all be equal except for one transition * at the point where we meet the incrementer. (We're running this with * the guest stopped). */ unsigned address; uint8_t first_byte; uint8_t last_byte; bool hit_edge = false; int bad = 0; qtest_memread(who, start_address, &first_byte, 1); last_byte = first_byte; for (address = start_address + TEST_MEM_PAGE_SIZE; address < end_address; address += TEST_MEM_PAGE_SIZE) { uint8_t b; qtest_memread(who, address, &b, 1); if (b != last_byte) { if (((b + 1) % 256) == last_byte && !hit_edge) { /* This is OK, the guest stopped at the point of * incrementing the previous page but didn't get * to us yet. */ hit_edge = true; last_byte = b; } else { bad++; if (bad <= 10) { fprintf(stderr, "Memory content inconsistency at %x" " first_byte = %x last_byte = %x current = %x" " hit_edge = %x\n", address, first_byte, last_byte, b, hit_edge); } } } } if (bad >= 10) { fprintf(stderr, "and in another %d pages", bad - 10); } g_assert(bad == 0); } static void cleanup(const char *filename) { g_autofree char *path = g_strdup_printf("%s/%s", tmpfs, filename); unlink(path); } static char *SocketAddress_to_str(SocketAddress *addr) { switch (addr->type) { case SOCKET_ADDRESS_TYPE_INET: return g_strdup_printf("tcp:%s:%s", addr->u.inet.host, addr->u.inet.port); case SOCKET_ADDRESS_TYPE_UNIX: return g_strdup_printf("unix:%s", addr->u.q_unix.path); case SOCKET_ADDRESS_TYPE_FD: return g_strdup_printf("fd:%s", addr->u.fd.str); case SOCKET_ADDRESS_TYPE_VSOCK: return g_strdup_printf("tcp:%s:%s", addr->u.vsock.cid, addr->u.vsock.port); default: return g_strdup("unknown address type"); } } static char *migrate_get_socket_address(QTestState *who, const char *parameter) { QDict *rsp; char *result; SocketAddressList *addrs; Visitor *iv = NULL; QObject *object; rsp = migrate_query(who); object = qdict_get(rsp, parameter); iv = qobject_input_visitor_new(object); visit_type_SocketAddressList(iv, NULL, &addrs, &error_abort); visit_free(iv); /* we are only using a single address */ result = SocketAddress_to_str(addrs->value); qapi_free_SocketAddressList(addrs); qobject_unref(rsp); return result; } static long long migrate_get_parameter_int(QTestState *who, const char *parameter) { QDict *rsp; long long result; rsp = wait_command(who, "{ 'execute': 'query-migrate-parameters' }"); result = qdict_get_int(rsp, parameter); qobject_unref(rsp); return result; } static void migrate_check_parameter_int(QTestState *who, const char *parameter, long long value) { long long result; result = migrate_get_parameter_int(who, parameter); g_assert_cmpint(result, ==, value); } static void migrate_set_parameter_int(QTestState *who, const char *parameter, long long value) { QDict *rsp; rsp = qtest_qmp(who, "{ 'execute': 'migrate-set-parameters'," "'arguments': { %s: %lld } }", parameter, value); g_assert(qdict_haskey(rsp, "return")); qobject_unref(rsp); migrate_check_parameter_int(who, parameter, value); } static char *migrate_get_parameter_str(QTestState *who, const char *parameter) { QDict *rsp; char *result; rsp = wait_command(who, "{ 'execute': 'query-migrate-parameters' }"); result = g_strdup(qdict_get_str(rsp, parameter)); qobject_unref(rsp); return result; } static void migrate_check_parameter_str(QTestState *who, const char *parameter, const char *value) { g_autofree char *result = migrate_get_parameter_str(who, parameter); g_assert_cmpstr(result, ==, value); } static void migrate_set_parameter_str(QTestState *who, const char *parameter, const char *value) { QDict *rsp; rsp = qtest_qmp(who, "{ 'execute': 'migrate-set-parameters'," "'arguments': { %s: %s } }", parameter, value); g_assert(qdict_haskey(rsp, "return")); qobject_unref(rsp); migrate_check_parameter_str(who, parameter, value); } static void migrate_ensure_non_converge(QTestState *who) { /* Can't converge with 1ms downtime + 3 mbs bandwidth limit */ migrate_set_parameter_int(who, "max-bandwidth", 3 * 1000 * 1000); migrate_set_parameter_int(who, "downtime-limit", 1); } static void migrate_ensure_converge(QTestState *who) { /* Should converge with 30s downtime + 1 gbs bandwidth limit */ migrate_set_parameter_int(who, "max-bandwidth", 1 * 1000 * 1000 * 1000); migrate_set_parameter_int(who, "downtime-limit", 30 * 1000); } static void migrate_pause(QTestState *who) { QDict *rsp; rsp = wait_command(who, "{ 'execute': 'migrate-pause' }"); qobject_unref(rsp); } static void migrate_continue(QTestState *who, const char *state) { QDict *rsp; rsp = wait_command(who, "{ 'execute': 'migrate-continue'," " 'arguments': { 'state': %s } }", state); qobject_unref(rsp); } static void migrate_recover(QTestState *who, const char *uri) { QDict *rsp; rsp = wait_command(who, "{ 'execute': 'migrate-recover', " " 'id': 'recover-cmd', " " 'arguments': { 'uri': %s } }", uri); qobject_unref(rsp); } static void migrate_cancel(QTestState *who) { QDict *rsp; rsp = wait_command(who, "{ 'execute': 'migrate_cancel' }"); qobject_unref(rsp); } static void migrate_set_capability(QTestState *who, const char *capability, bool value) { QDict *rsp; rsp = qtest_qmp(who, "{ 'execute': 'migrate-set-capabilities'," "'arguments': { " "'capabilities': [ { " "'capability': %s, 'state': %i } ] } }", capability, value); g_assert(qdict_haskey(rsp, "return")); qobject_unref(rsp); } static void migrate_postcopy_start(QTestState *from, QTestState *to) { QDict *rsp; rsp = wait_command(from, "{ 'execute': 'migrate-start-postcopy' }"); qobject_unref(rsp); if (!got_stop) { qtest_qmp_eventwait(from, "STOP"); } qtest_qmp_eventwait(to, "RESUME"); } typedef struct { /* * QTEST_LOG=1 may override this. When QTEST_LOG=1, we always dump errors * unconditionally, because it means the user would like to be verbose. */ bool hide_stderr; bool use_shmem; /* only launch the target process */ bool only_target; /* Use dirty ring if true; dirty logging otherwise */ bool use_dirty_ring; const char *opts_source; const char *opts_target; } MigrateStart; /* * A hook that runs after the src and dst QEMUs have been * created, but before the migration is started. This can * be used to set migration parameters and capabilities. * * Returns: NULL, or a pointer to opaque state to be * later passed to the TestMigrateFinishHook */ typedef void * (*TestMigrateStartHook)(QTestState *from, QTestState *to); /* * A hook that runs after the migration has finished, * regardless of whether it succeeded or failed, but * before QEMU has terminated (unless it self-terminated * due to migration error) * * @opaque is a pointer to state previously returned * by the TestMigrateStartHook if any, or NULL. */ typedef void (*TestMigrateFinishHook)(QTestState *from, QTestState *to, void *opaque); typedef struct { /* Optional: fine tune start parameters */ MigrateStart start; /* Required: the URI for the dst QEMU to listen on */ const char *listen_uri; /* * Optional: the URI for the src QEMU to connect to * If NULL, then it will query the dst QEMU for its actual * listening address and use that as the connect address. * This allows for dynamically picking a free TCP port. */ const char *connect_uri; /* Optional: callback to run at start to set migration parameters */ TestMigrateStartHook start_hook; /* Optional: callback to run at finish to cleanup */ TestMigrateFinishHook finish_hook; /* * Optional: normally we expect the migration process to complete. * * There can be a variety of reasons and stages in which failure * can happen during tests. * * If a failure is expected to happen at time of establishing * the connection, then MIG_TEST_FAIL will indicate that the dst * QEMU is expected to stay running and accept future migration * connections. * * If a failure is expected to happen while processing the * migration stream, then MIG_TEST_FAIL_DEST_QUIT_ERR will indicate * that the dst QEMU is expected to quit with non-zero exit status */ enum { /* This test should succeed, the default */ MIG_TEST_SUCCEED = 0, /* This test should fail, dest qemu should keep alive */ MIG_TEST_FAIL, /* This test should fail, dest qemu should fail with abnormal status */ MIG_TEST_FAIL_DEST_QUIT_ERR, } result; /* Optional: set number of migration passes to wait for */ unsigned int iterations; /* Postcopy specific fields */ void *postcopy_data; bool postcopy_preempt; } MigrateCommon; static int test_migrate_start(QTestState **from, QTestState **to, const char *uri, MigrateStart *args) { g_autofree gchar *arch_source = NULL; g_autofree gchar *arch_target = NULL; g_autofree gchar *cmd_source = NULL; g_autofree gchar *cmd_target = NULL; const gchar *ignore_stderr; g_autofree char *bootpath = NULL; g_autofree char *shmem_opts = NULL; g_autofree char *shmem_path = NULL; const char *arch = qtest_get_arch(); const char *machine_opts = NULL; const char *memory_size; if (args->use_shmem) { if (!g_file_test("/dev/shm", G_FILE_TEST_IS_DIR)) { g_test_skip("/dev/shm is not supported"); return -1; } } got_stop = false; bootpath = g_strdup_printf("%s/bootsect", tmpfs); if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) { /* the assembled x86 boot sector should be exactly one sector large */ assert(sizeof(x86_bootsect) == 512); init_bootfile(bootpath, x86_bootsect, sizeof(x86_bootsect)); memory_size = "150M"; arch_source = g_strdup_printf("-drive file=%s,format=raw", bootpath); arch_target = g_strdup(arch_source); start_address = X86_TEST_MEM_START; end_address = X86_TEST_MEM_END; } else if (g_str_equal(arch, "s390x")) { init_bootfile(bootpath, s390x_elf, sizeof(s390x_elf)); memory_size = "128M"; arch_source = g_strdup_printf("-bios %s", bootpath); arch_target = g_strdup(arch_source); start_address = S390_TEST_MEM_START; end_address = S390_TEST_MEM_END; } else if (strcmp(arch, "ppc64") == 0) { machine_opts = "vsmt=8"; memory_size = "256M"; start_address = PPC_TEST_MEM_START; end_address = PPC_TEST_MEM_END; arch_source = g_strdup_printf("-nodefaults " "-prom-env 'use-nvramrc?=true' -prom-env " "'nvramrc=hex .\" _\" begin %x %x " "do i c@ 1 + i c! 1000 +loop .\" B\" 0 " "until'", end_address, start_address); arch_target = g_strdup(""); } else if (strcmp(arch, "aarch64") == 0) { init_bootfile(bootpath, aarch64_kernel, sizeof(aarch64_kernel)); machine_opts = "virt,gic-version=max"; memory_size = "150M"; arch_source = g_strdup_printf("-cpu max " "-kernel %s", bootpath); arch_target = g_strdup(arch_source); start_address = ARM_TEST_MEM_START; end_address = ARM_TEST_MEM_END; g_assert(sizeof(aarch64_kernel) <= ARM_TEST_MAX_KERNEL_SIZE); } else { g_assert_not_reached(); } if (!getenv("QTEST_LOG") && args->hide_stderr) { #ifndef _WIN32 ignore_stderr = "2>/dev/null"; #else /* * On Windows the QEMU executable is created via CreateProcess() and * IO redirection does not work, so don't bother adding IO redirection * to the command line. */ ignore_stderr = ""; #endif } else { ignore_stderr = ""; } if (args->use_shmem) { shmem_path = g_strdup_printf("/dev/shm/qemu-%d", getpid()); shmem_opts = g_strdup_printf( "-object memory-backend-file,id=mem0,size=%s" ",mem-path=%s,share=on -numa node,memdev=mem0", memory_size, shmem_path); } else { shmem_path = NULL; shmem_opts = g_strdup(""); } cmd_source = g_strdup_printf("-accel kvm%s -accel tcg%s%s " "-name source,debug-threads=on " "-m %s " "-serial file:%s/src_serial " "%s %s %s %s", args->use_dirty_ring ? ",dirty-ring-size=4096" : "", machine_opts ? " -machine " : "", machine_opts ? machine_opts : "", memory_size, tmpfs, arch_source, shmem_opts, args->opts_source ? args->opts_source : "", ignore_stderr); if (!args->only_target) { *from = qtest_init(cmd_source); } cmd_target = g_strdup_printf("-accel kvm%s -accel tcg%s%s " "-name target,debug-threads=on " "-m %s " "-serial file:%s/dest_serial " "-incoming %s " "%s %s %s %s", args->use_dirty_ring ? ",dirty-ring-size=4096" : "", machine_opts ? " -machine " : "", machine_opts ? machine_opts : "", memory_size, tmpfs, uri, arch_target, shmem_opts, args->opts_target ? args->opts_target : "", ignore_stderr); *to = qtest_init(cmd_target); /* * Remove shmem file immediately to avoid memory leak in test failed case. * It's valid becase QEMU has already opened this file */ if (args->use_shmem) { unlink(shmem_path); } return 0; } static void test_migrate_end(QTestState *from, QTestState *to, bool test_dest) { unsigned char dest_byte_a, dest_byte_b, dest_byte_c, dest_byte_d; qtest_quit(from); if (test_dest) { qtest_memread(to, start_address, &dest_byte_a, 1); /* Destination still running, wait for a byte to change */ do { qtest_memread(to, start_address, &dest_byte_b, 1); usleep(1000 * 10); } while (dest_byte_a == dest_byte_b); qtest_qmp_discard_response(to, "{ 'execute' : 'stop'}"); /* With it stopped, check nothing changes */ qtest_memread(to, start_address, &dest_byte_c, 1); usleep(1000 * 200); qtest_memread(to, start_address, &dest_byte_d, 1); g_assert_cmpint(dest_byte_c, ==, dest_byte_d); check_guests_ram(to); } qtest_quit(to); cleanup("bootsect"); cleanup("migsocket"); cleanup("src_serial"); cleanup("dest_serial"); } #ifdef CONFIG_GNUTLS struct TestMigrateTLSPSKData { char *workdir; char *workdiralt; char *pskfile; char *pskfilealt; }; static void * test_migrate_tls_psk_start_common(QTestState *from, QTestState *to, bool mismatch) { struct TestMigrateTLSPSKData *data = g_new0(struct TestMigrateTLSPSKData, 1); QDict *rsp; data->workdir = g_strdup_printf("%s/tlscredspsk0", tmpfs); data->pskfile = g_strdup_printf("%s/%s", data->workdir, QCRYPTO_TLS_CREDS_PSKFILE); g_mkdir_with_parents(data->workdir, 0700); test_tls_psk_init(data->pskfile); if (mismatch) { data->workdiralt = g_strdup_printf("%s/tlscredspskalt0", tmpfs); data->pskfilealt = g_strdup_printf("%s/%s", data->workdiralt, QCRYPTO_TLS_CREDS_PSKFILE); g_mkdir_with_parents(data->workdiralt, 0700); test_tls_psk_init_alt(data->pskfilealt); } rsp = wait_command(from, "{ 'execute': 'object-add'," " 'arguments': { 'qom-type': 'tls-creds-psk'," " 'id': 'tlscredspsk0'," " 'endpoint': 'client'," " 'dir': %s," " 'username': 'qemu'} }", data->workdir); qobject_unref(rsp); rsp = wait_command(to, "{ 'execute': 'object-add'," " 'arguments': { 'qom-type': 'tls-creds-psk'," " 'id': 'tlscredspsk0'," " 'endpoint': 'server'," " 'dir': %s } }", mismatch ? data->workdiralt : data->workdir); qobject_unref(rsp); migrate_set_parameter_str(from, "tls-creds", "tlscredspsk0"); migrate_set_parameter_str(to, "tls-creds", "tlscredspsk0"); return data; } static void * test_migrate_tls_psk_start_match(QTestState *from, QTestState *to) { return test_migrate_tls_psk_start_common(from, to, false); } static void * test_migrate_tls_psk_start_mismatch(QTestState *from, QTestState *to) { return test_migrate_tls_psk_start_common(from, to, true); } static void test_migrate_tls_psk_finish(QTestState *from, QTestState *to, void *opaque) { struct TestMigrateTLSPSKData *data = opaque; test_tls_psk_cleanup(data->pskfile); if (data->pskfilealt) { test_tls_psk_cleanup(data->pskfilealt); } rmdir(data->workdir); if (data->workdiralt) { rmdir(data->workdiralt); } g_free(data->workdiralt); g_free(data->pskfilealt); g_free(data->workdir); g_free(data->pskfile); g_free(data); } #ifdef CONFIG_TASN1 typedef struct { char *workdir; char *keyfile; char *cacert; char *servercert; char *serverkey; char *clientcert; char *clientkey; } TestMigrateTLSX509Data; typedef struct { bool verifyclient; bool clientcert; bool hostileclient; bool authzclient; const char *certhostname; const char *certipaddr; } TestMigrateTLSX509; static void * test_migrate_tls_x509_start_common(QTestState *from, QTestState *to, TestMigrateTLSX509 *args) { TestMigrateTLSX509Data *data = g_new0(TestMigrateTLSX509Data, 1); QDict *rsp; data->workdir = g_strdup_printf("%s/tlscredsx5090", tmpfs); data->keyfile = g_strdup_printf("%s/key.pem", data->workdir); data->cacert = g_strdup_printf("%s/ca-cert.pem", data->workdir); data->serverkey = g_strdup_printf("%s/server-key.pem", data->workdir); data->servercert = g_strdup_printf("%s/server-cert.pem", data->workdir); if (args->clientcert) { data->clientkey = g_strdup_printf("%s/client-key.pem", data->workdir); data->clientcert = g_strdup_printf("%s/client-cert.pem", data->workdir); } g_mkdir_with_parents(data->workdir, 0700); test_tls_init(data->keyfile); #ifndef _WIN32 g_assert(link(data->keyfile, data->serverkey) == 0); #else g_assert(CreateHardLink(data->serverkey, data->keyfile, NULL) != 0); #endif if (args->clientcert) { #ifndef _WIN32 g_assert(link(data->keyfile, data->clientkey) == 0); #else g_assert(CreateHardLink(data->clientkey, data->keyfile, NULL) != 0); #endif } TLS_ROOT_REQ_SIMPLE(cacertreq, data->cacert); if (args->clientcert) { TLS_CERT_REQ_SIMPLE_CLIENT(servercertreq, cacertreq, args->hostileclient ? QCRYPTO_TLS_TEST_CLIENT_HOSTILE_NAME : QCRYPTO_TLS_TEST_CLIENT_NAME, data->clientcert); } TLS_CERT_REQ_SIMPLE_SERVER(clientcertreq, cacertreq, data->servercert, args->certhostname, args->certipaddr); rsp = wait_command(from, "{ 'execute': 'object-add'," " 'arguments': { 'qom-type': 'tls-creds-x509'," " 'id': 'tlscredsx509client0'," " 'endpoint': 'client'," " 'dir': %s," " 'sanity-check': true," " 'verify-peer': true} }", data->workdir); qobject_unref(rsp); migrate_set_parameter_str(from, "tls-creds", "tlscredsx509client0"); if (args->certhostname) { migrate_set_parameter_str(from, "tls-hostname", args->certhostname); } rsp = wait_command(to, "{ 'execute': 'object-add'," " 'arguments': { 'qom-type': 'tls-creds-x509'," " 'id': 'tlscredsx509server0'," " 'endpoint': 'server'," " 'dir': %s," " 'sanity-check': true," " 'verify-peer': %i} }", data->workdir, args->verifyclient); qobject_unref(rsp); migrate_set_parameter_str(to, "tls-creds", "tlscredsx509server0"); if (args->authzclient) { rsp = wait_command(to, "{ 'execute': 'object-add'," " 'arguments': { 'qom-type': 'authz-simple'," " 'id': 'tlsauthz0'," " 'identity': %s} }", "CN=" QCRYPTO_TLS_TEST_CLIENT_NAME); migrate_set_parameter_str(to, "tls-authz", "tlsauthz0"); } return data; } /* * The normal case: match server's cert hostname against * whatever host we were telling QEMU to connect to (if any) */ static void * test_migrate_tls_x509_start_default_host(QTestState *from, QTestState *to) { TestMigrateTLSX509 args = { .verifyclient = true, .clientcert = true, .certipaddr = "127.0.0.1" }; return test_migrate_tls_x509_start_common(from, to, &args); } /* * The unusual case: the server's cert is different from * the address we're telling QEMU to connect to (if any), * so we must give QEMU an explicit hostname to validate */ static void * test_migrate_tls_x509_start_override_host(QTestState *from, QTestState *to) { TestMigrateTLSX509 args = { .verifyclient = true, .clientcert = true, .certhostname = "qemu.org", }; return test_migrate_tls_x509_start_common(from, to, &args); } /* * The unusual case: the server's cert is different from * the address we're telling QEMU to connect to, and so we * expect the client to reject the server */ static void * test_migrate_tls_x509_start_mismatch_host(QTestState *from, QTestState *to) { TestMigrateTLSX509 args = { .verifyclient = true, .clientcert = true, .certipaddr = "10.0.0.1", }; return test_migrate_tls_x509_start_common(from, to, &args); } static void * test_migrate_tls_x509_start_friendly_client(QTestState *from, QTestState *to) { TestMigrateTLSX509 args = { .verifyclient = true, .clientcert = true, .authzclient = true, .certipaddr = "127.0.0.1", }; return test_migrate_tls_x509_start_common(from, to, &args); } static void * test_migrate_tls_x509_start_hostile_client(QTestState *from, QTestState *to) { TestMigrateTLSX509 args = { .verifyclient = true, .clientcert = true, .hostileclient = true, .authzclient = true, .certipaddr = "127.0.0.1", }; return test_migrate_tls_x509_start_common(from, to, &args); } /* * The case with no client certificate presented, * and no server verification */ static void * test_migrate_tls_x509_start_allow_anon_client(QTestState *from, QTestState *to) { TestMigrateTLSX509 args = { .certipaddr = "127.0.0.1", }; return test_migrate_tls_x509_start_common(from, to, &args); } /* * The case with no client certificate presented, * and server verification rejecting */ static void * test_migrate_tls_x509_start_reject_anon_client(QTestState *from, QTestState *to) { TestMigrateTLSX509 args = { .verifyclient = true, .certipaddr = "127.0.0.1", }; return test_migrate_tls_x509_start_common(from, to, &args); } static void test_migrate_tls_x509_finish(QTestState *from, QTestState *to, void *opaque) { TestMigrateTLSX509Data *data = opaque; test_tls_cleanup(data->keyfile); g_free(data->keyfile); unlink(data->cacert); g_free(data->cacert); unlink(data->servercert); g_free(data->servercert); unlink(data->serverkey); g_free(data->serverkey); if (data->clientcert) { unlink(data->clientcert); g_free(data->clientcert); } if (data->clientkey) { unlink(data->clientkey); g_free(data->clientkey); } rmdir(data->workdir); g_free(data->workdir); g_free(data); } #endif /* CONFIG_TASN1 */ #endif /* CONFIG_GNUTLS */ static int migrate_postcopy_prepare(QTestState **from_ptr, QTestState **to_ptr, MigrateCommon *args) { g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs); QTestState *from, *to; if (test_migrate_start(&from, &to, uri, &args->start)) { return -1; } if (args->start_hook) { args->postcopy_data = args->start_hook(from, to); } migrate_set_capability(from, "postcopy-ram", true); migrate_set_capability(to, "postcopy-ram", true); migrate_set_capability(to, "postcopy-blocktime", true); if (args->postcopy_preempt) { migrate_set_capability(from, "postcopy-preempt", true); migrate_set_capability(to, "postcopy-preempt", true); } migrate_ensure_non_converge(from); /* Wait for the first serial output from the source */ wait_for_serial("src_serial"); migrate_qmp(from, uri, "{}"); wait_for_migration_pass(from); *from_ptr = from; *to_ptr = to; return 0; } static void migrate_postcopy_complete(QTestState *from, QTestState *to, MigrateCommon *args) { wait_for_migration_complete(from); /* Make sure we get at least one "B" on destination */ wait_for_serial("dest_serial"); if (uffd_feature_thread_id) { read_blocktime(to); } if (args->finish_hook) { args->finish_hook(from, to, args->postcopy_data); args->postcopy_data = NULL; } test_migrate_end(from, to, true); } static void test_postcopy_common(MigrateCommon *args) { QTestState *from, *to; if (migrate_postcopy_prepare(&from, &to, args)) { return; } migrate_postcopy_start(from, to); migrate_postcopy_complete(from, to, args); } static void test_postcopy(void) { MigrateCommon args = { }; test_postcopy_common(&args); } static void test_postcopy_preempt(void) { MigrateCommon args = { .postcopy_preempt = true, }; test_postcopy_common(&args); } #ifdef CONFIG_GNUTLS static void test_postcopy_tls_psk(void) { MigrateCommon args = { .start_hook = test_migrate_tls_psk_start_match, .finish_hook = test_migrate_tls_psk_finish, }; test_postcopy_common(&args); } static void test_postcopy_preempt_tls_psk(void) { MigrateCommon args = { .postcopy_preempt = true, .start_hook = test_migrate_tls_psk_start_match, .finish_hook = test_migrate_tls_psk_finish, }; test_postcopy_common(&args); } #endif static void test_postcopy_recovery_common(MigrateCommon *args) { QTestState *from, *to; g_autofree char *uri = NULL; /* Always hide errors for postcopy recover tests since they're expected */ args->start.hide_stderr = true; if (migrate_postcopy_prepare(&from, &to, args)) { return; } /* Turn postcopy speed down, 4K/s is slow enough on any machines */ migrate_set_parameter_int(from, "max-postcopy-bandwidth", 4096); /* Now we start the postcopy */ migrate_postcopy_start(from, to); /* * Wait until postcopy is really started; we can only run the * migrate-pause command during a postcopy */ wait_for_migration_status(from, "postcopy-active", NULL); /* * Manually stop the postcopy migration. This emulates a network * failure with the migration socket */ migrate_pause(from); /* * Wait for destination side to reach postcopy-paused state. The * migrate-recover command can only succeed if destination machine * is in the paused state */ wait_for_migration_status(to, "postcopy-paused", (const char * []) { "failed", "active", "completed", NULL }); /* * Create a new socket to emulate a new channel that is different * from the broken migration channel; tell the destination to * listen to the new port */ uri = g_strdup_printf("unix:%s/migsocket-recover", tmpfs); migrate_recover(to, uri); /* * Try to rebuild the migration channel using the resume flag and * the newly created channel */ wait_for_migration_status(from, "postcopy-paused", (const char * []) { "failed", "active", "completed", NULL }); migrate_qmp(from, uri, "{'resume': true}"); /* Restore the postcopy bandwidth to unlimited */ migrate_set_parameter_int(from, "max-postcopy-bandwidth", 0); migrate_postcopy_complete(from, to, args); } static void test_postcopy_recovery(void) { MigrateCommon args = { }; test_postcopy_recovery_common(&args); } #ifdef CONFIG_GNUTLS static void test_postcopy_recovery_tls_psk(void) { MigrateCommon args = { .start_hook = test_migrate_tls_psk_start_match, .finish_hook = test_migrate_tls_psk_finish, }; test_postcopy_recovery_common(&args); } #endif static void test_postcopy_preempt_recovery(void) { MigrateCommon args = { .postcopy_preempt = true, }; test_postcopy_recovery_common(&args); } #ifdef CONFIG_GNUTLS /* This contains preempt+recovery+tls test altogether */ static void test_postcopy_preempt_all(void) { MigrateCommon args = { .postcopy_preempt = true, .start_hook = test_migrate_tls_psk_start_match, .finish_hook = test_migrate_tls_psk_finish, }; test_postcopy_recovery_common(&args); } #endif static void test_baddest(void) { MigrateStart args = { .hide_stderr = true }; QTestState *from, *to; if (test_migrate_start(&from, &to, "tcp:127.0.0.1:0", &args)) { return; } migrate_qmp(from, "tcp:127.0.0.1:0", "{}"); wait_for_migration_fail(from, false); test_migrate_end(from, to, false); } static void test_precopy_common(MigrateCommon *args) { QTestState *from, *to; void *data_hook = NULL; if (test_migrate_start(&from, &to, args->listen_uri, &args->start)) { return; } migrate_ensure_non_converge(from); if (args->start_hook) { data_hook = args->start_hook(from, to); } /* Wait for the first serial output from the source */ if (args->result == MIG_TEST_SUCCEED) { wait_for_serial("src_serial"); } if (!args->connect_uri) { g_autofree char *local_connect_uri = migrate_get_socket_address(to, "socket-address"); migrate_qmp(from, local_connect_uri, "{}"); } else { migrate_qmp(from, args->connect_uri, "{}"); } if (args->result != MIG_TEST_SUCCEED) { bool allow_active = args->result == MIG_TEST_FAIL; wait_for_migration_fail(from, allow_active); if (args->result == MIG_TEST_FAIL_DEST_QUIT_ERR) { qtest_set_expected_status(to, EXIT_FAILURE); } } else { if (args->iterations) { while (args->iterations--) { wait_for_migration_pass(from); } } else { wait_for_migration_pass(from); } migrate_ensure_converge(from); /* We do this first, as it has a timeout to stop us * hanging forever if migration didn't converge */ wait_for_migration_complete(from); if (!got_stop) { qtest_qmp_eventwait(from, "STOP"); } qtest_qmp_eventwait(to, "RESUME"); wait_for_serial("dest_serial"); } if (args->finish_hook) { args->finish_hook(from, to, data_hook); } test_migrate_end(from, to, args->result == MIG_TEST_SUCCEED); } static void test_precopy_unix_plain(void) { g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs); MigrateCommon args = { .listen_uri = uri, .connect_uri = uri, }; test_precopy_common(&args); } static void test_precopy_unix_dirty_ring(void) { g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs); MigrateCommon args = { .start = { .use_dirty_ring = true, }, .listen_uri = uri, .connect_uri = uri, }; test_precopy_common(&args); } #ifdef CONFIG_GNUTLS static void test_precopy_unix_tls_psk(void) { g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs); MigrateCommon args = { .connect_uri = uri, .listen_uri = uri, .start_hook = test_migrate_tls_psk_start_match, .finish_hook = test_migrate_tls_psk_finish, }; test_precopy_common(&args); } #ifdef CONFIG_TASN1 static void test_precopy_unix_tls_x509_default_host(void) { g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs); MigrateCommon args = { .start = { .hide_stderr = true, }, .connect_uri = uri, .listen_uri = uri, .start_hook = test_migrate_tls_x509_start_default_host, .finish_hook = test_migrate_tls_x509_finish, .result = MIG_TEST_FAIL_DEST_QUIT_ERR, }; test_precopy_common(&args); } static void test_precopy_unix_tls_x509_override_host(void) { g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs); MigrateCommon args = { .connect_uri = uri, .listen_uri = uri, .start_hook = test_migrate_tls_x509_start_override_host, .finish_hook = test_migrate_tls_x509_finish, }; test_precopy_common(&args); } #endif /* CONFIG_TASN1 */ #endif /* CONFIG_GNUTLS */ #if 0 /* Currently upset on aarch64 TCG */ static void test_ignore_shared(void) { g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs); QTestState *from, *to; if (test_migrate_start(&from, &to, uri, false, true, NULL, NULL)) { return; } migrate_set_capability(from, "x-ignore-shared", true); migrate_set_capability(to, "x-ignore-shared", true); /* Wait for the first serial output from the source */ wait_for_serial("src_serial"); migrate_qmp(from, uri, "{}"); wait_for_migration_pass(from); if (!got_stop) { qtest_qmp_eventwait(from, "STOP"); } qtest_qmp_eventwait(to, "RESUME"); wait_for_serial("dest_serial"); wait_for_migration_complete(from); /* Check whether shared RAM has been really skipped */ g_assert_cmpint(read_ram_property_int(from, "transferred"), <, 1024 * 1024); test_migrate_end(from, to, true); } #endif static void * test_migrate_xbzrle_start(QTestState *from, QTestState *to) { migrate_set_parameter_int(from, "xbzrle-cache-size", 33554432); migrate_set_capability(from, "xbzrle", true); migrate_set_capability(to, "xbzrle", true); return NULL; } static void test_precopy_unix_xbzrle(void) { g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs); MigrateCommon args = { .connect_uri = uri, .listen_uri = uri, .start_hook = test_migrate_xbzrle_start, .iterations = 2, }; test_precopy_common(&args); } static void test_precopy_tcp_plain(void) { MigrateCommon args = { .listen_uri = "tcp:127.0.0.1:0", }; test_precopy_common(&args); } #ifdef CONFIG_GNUTLS static void test_precopy_tcp_tls_psk_match(void) { MigrateCommon args = { .listen_uri = "tcp:127.0.0.1:0", .start_hook = test_migrate_tls_psk_start_match, .finish_hook = test_migrate_tls_psk_finish, }; test_precopy_common(&args); } static void test_precopy_tcp_tls_psk_mismatch(void) { MigrateCommon args = { .start = { .hide_stderr = true, }, .listen_uri = "tcp:127.0.0.1:0", .start_hook = test_migrate_tls_psk_start_mismatch, .finish_hook = test_migrate_tls_psk_finish, .result = MIG_TEST_FAIL, }; test_precopy_common(&args); } #ifdef CONFIG_TASN1 static void test_precopy_tcp_tls_x509_default_host(void) { MigrateCommon args = { .listen_uri = "tcp:127.0.0.1:0", .start_hook = test_migrate_tls_x509_start_default_host, .finish_hook = test_migrate_tls_x509_finish, }; test_precopy_common(&args); } static void test_precopy_tcp_tls_x509_override_host(void) { MigrateCommon args = { .listen_uri = "tcp:127.0.0.1:0", .start_hook = test_migrate_tls_x509_start_override_host, .finish_hook = test_migrate_tls_x509_finish, }; test_precopy_common(&args); } static void test_precopy_tcp_tls_x509_mismatch_host(void) { MigrateCommon args = { .start = { .hide_stderr = true, }, .listen_uri = "tcp:127.0.0.1:0", .start_hook = test_migrate_tls_x509_start_mismatch_host, .finish_hook = test_migrate_tls_x509_finish, .result = MIG_TEST_FAIL_DEST_QUIT_ERR, }; test_precopy_common(&args); } static void test_precopy_tcp_tls_x509_friendly_client(void) { MigrateCommon args = { .listen_uri = "tcp:127.0.0.1:0", .start_hook = test_migrate_tls_x509_start_friendly_client, .finish_hook = test_migrate_tls_x509_finish, }; test_precopy_common(&args); } static void test_precopy_tcp_tls_x509_hostile_client(void) { MigrateCommon args = { .start = { .hide_stderr = true, }, .listen_uri = "tcp:127.0.0.1:0", .start_hook = test_migrate_tls_x509_start_hostile_client, .finish_hook = test_migrate_tls_x509_finish, .result = MIG_TEST_FAIL, }; test_precopy_common(&args); } static void test_precopy_tcp_tls_x509_allow_anon_client(void) { MigrateCommon args = { .listen_uri = "tcp:127.0.0.1:0", .start_hook = test_migrate_tls_x509_start_allow_anon_client, .finish_hook = test_migrate_tls_x509_finish, }; test_precopy_common(&args); } static void test_precopy_tcp_tls_x509_reject_anon_client(void) { MigrateCommon args = { .start = { .hide_stderr = true, }, .listen_uri = "tcp:127.0.0.1:0", .start_hook = test_migrate_tls_x509_start_reject_anon_client, .finish_hook = test_migrate_tls_x509_finish, .result = MIG_TEST_FAIL, }; test_precopy_common(&args); } #endif /* CONFIG_TASN1 */ #endif /* CONFIG_GNUTLS */ #ifndef _WIN32 static void *test_migrate_fd_start_hook(QTestState *from, QTestState *to) { QDict *rsp; int ret; int pair[2]; /* Create two connected sockets for migration */ ret = qemu_socketpair(PF_LOCAL, SOCK_STREAM, 0, pair); g_assert_cmpint(ret, ==, 0); /* Send the 1st socket to the target */ rsp = wait_command_fd(to, pair[0], "{ 'execute': 'getfd'," " 'arguments': { 'fdname': 'fd-mig' }}"); qobject_unref(rsp); close(pair[0]); /* Start incoming migration from the 1st socket */ rsp = wait_command(to, "{ 'execute': 'migrate-incoming'," " 'arguments': { 'uri': 'fd:fd-mig' }}"); qobject_unref(rsp); /* Send the 2nd socket to the target */ rsp = wait_command_fd(from, pair[1], "{ 'execute': 'getfd'," " 'arguments': { 'fdname': 'fd-mig' }}"); qobject_unref(rsp); close(pair[1]); return NULL; } static void test_migrate_fd_finish_hook(QTestState *from, QTestState *to, void *opaque) { QDict *rsp; const char *error_desc; /* Test closing fds */ /* We assume, that QEMU removes named fd from its list, * so this should fail */ rsp = qtest_qmp(from, "{ 'execute': 'closefd'," " 'arguments': { 'fdname': 'fd-mig' }}"); g_assert_true(qdict_haskey(rsp, "error")); error_desc = qdict_get_str(qdict_get_qdict(rsp, "error"), "desc"); g_assert_cmpstr(error_desc, ==, "File descriptor named 'fd-mig' not found"); qobject_unref(rsp); rsp = qtest_qmp(to, "{ 'execute': 'closefd'," " 'arguments': { 'fdname': 'fd-mig' }}"); g_assert_true(qdict_haskey(rsp, "error")); error_desc = qdict_get_str(qdict_get_qdict(rsp, "error"), "desc"); g_assert_cmpstr(error_desc, ==, "File descriptor named 'fd-mig' not found"); qobject_unref(rsp); } static void test_migrate_fd_proto(void) { MigrateCommon args = { .listen_uri = "defer", .connect_uri = "fd:fd-mig", .start_hook = test_migrate_fd_start_hook, .finish_hook = test_migrate_fd_finish_hook }; test_precopy_common(&args); } #endif /* _WIN32 */ static void do_test_validate_uuid(MigrateStart *args, bool should_fail) { g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs); QTestState *from, *to; if (test_migrate_start(&from, &to, uri, args)) { return; } /* * UUID validation is at the begin of migration. So, the main process of * migration is not interesting for us here. Thus, set huge downtime for * very fast migration. */ migrate_set_parameter_int(from, "downtime-limit", 1000000); migrate_set_capability(from, "validate-uuid", true); /* Wait for the first serial output from the source */ wait_for_serial("src_serial"); migrate_qmp(from, uri, "{}"); if (should_fail) { qtest_set_expected_status(to, EXIT_FAILURE); wait_for_migration_fail(from, true); } else { wait_for_migration_complete(from); } test_migrate_end(from, to, false); } static void test_validate_uuid(void) { MigrateStart args = { .opts_source = "-uuid 11111111-1111-1111-1111-111111111111", .opts_target = "-uuid 11111111-1111-1111-1111-111111111111", }; do_test_validate_uuid(&args, false); } static void test_validate_uuid_error(void) { MigrateStart args = { .opts_source = "-uuid 11111111-1111-1111-1111-111111111111", .opts_target = "-uuid 22222222-2222-2222-2222-222222222222", .hide_stderr = true, }; do_test_validate_uuid(&args, true); } static void test_validate_uuid_src_not_set(void) { MigrateStart args = { .opts_target = "-uuid 22222222-2222-2222-2222-222222222222", .hide_stderr = true, }; do_test_validate_uuid(&args, false); } static void test_validate_uuid_dst_not_set(void) { MigrateStart args = { .opts_source = "-uuid 11111111-1111-1111-1111-111111111111", .hide_stderr = true, }; do_test_validate_uuid(&args, false); } /* * The way auto_converge works, we need to do too many passes to * run this test. Auto_converge logic is only run once every * three iterations, so: * * - 3 iterations without auto_converge enabled * - 3 iterations with pct = 5 * - 3 iterations with pct = 30 * - 3 iterations with pct = 55 * - 3 iterations with pct = 80 * - 3 iterations with pct = 95 (max(95, 80 + 25)) * * To make things even worse, we need to run the initial stage at * 3MB/s so we enter autoconverge even when host is (over)loaded. */ static void test_migrate_auto_converge(void) { g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs); MigrateStart args = {}; QTestState *from, *to; int64_t percentage; /* * We want the test to be stable and as fast as possible. * E.g., with 1Gb/s bandwith migration may pass without throttling, * so we need to decrease a bandwidth. */ const int64_t init_pct = 5, inc_pct = 25, max_pct = 95; if (test_migrate_start(&from, &to, uri, &args)) { return; } migrate_set_capability(from, "auto-converge", true); migrate_set_parameter_int(from, "cpu-throttle-initial", init_pct); migrate_set_parameter_int(from, "cpu-throttle-increment", inc_pct); migrate_set_parameter_int(from, "max-cpu-throttle", max_pct); /* * Set the initial parameters so that the migration could not converge * without throttling. */ migrate_ensure_non_converge(from); /* To check remaining size after precopy */ migrate_set_capability(from, "pause-before-switchover", true); /* Wait for the first serial output from the source */ wait_for_serial("src_serial"); migrate_qmp(from, uri, "{}"); /* Wait for throttling begins */ percentage = 0; do { percentage = read_migrate_property_int(from, "cpu-throttle-percentage"); if (percentage != 0) { break; } usleep(20); g_assert_false(got_stop); } while (true); /* The first percentage of throttling should be at least init_pct */ g_assert_cmpint(percentage, >=, init_pct); /* Now, when we tested that throttling works, let it converge */ migrate_ensure_converge(from); /* * Wait for pre-switchover status to check last throttle percentage * and remaining. These values will be zeroed later */ wait_for_migration_status(from, "pre-switchover", NULL); /* The final percentage of throttling shouldn't be greater than max_pct */ percentage = read_migrate_property_int(from, "cpu-throttle-percentage"); g_assert_cmpint(percentage, <=, max_pct); migrate_continue(from, "pre-switchover"); qtest_qmp_eventwait(to, "RESUME"); wait_for_serial("dest_serial"); wait_for_migration_complete(from); test_migrate_end(from, to, true); } static void * test_migrate_precopy_tcp_multifd_start_common(QTestState *from, QTestState *to, const char *method) { QDict *rsp; migrate_set_parameter_int(from, "multifd-channels", 16); migrate_set_parameter_int(to, "multifd-channels", 16); migrate_set_parameter_str(from, "multifd-compression", method); migrate_set_parameter_str(to, "multifd-compression", method); migrate_set_capability(from, "multifd", true); migrate_set_capability(to, "multifd", true); /* Start incoming migration from the 1st socket */ rsp = wait_command(to, "{ 'execute': 'migrate-incoming'," " 'arguments': { 'uri': 'tcp:127.0.0.1:0' }}"); qobject_unref(rsp); return NULL; } static void * test_migrate_precopy_tcp_multifd_start(QTestState *from, QTestState *to) { return test_migrate_precopy_tcp_multifd_start_common(from, to, "none"); } static void * test_migrate_precopy_tcp_multifd_zlib_start(QTestState *from, QTestState *to) { return test_migrate_precopy_tcp_multifd_start_common(from, to, "zlib"); } #ifdef CONFIG_ZSTD static void * test_migrate_precopy_tcp_multifd_zstd_start(QTestState *from, QTestState *to) { return test_migrate_precopy_tcp_multifd_start_common(from, to, "zstd"); } #endif /* CONFIG_ZSTD */ static void test_multifd_tcp_none(void) { MigrateCommon args = { .listen_uri = "defer", .start_hook = test_migrate_precopy_tcp_multifd_start, }; test_precopy_common(&args); } static void test_multifd_tcp_zlib(void) { MigrateCommon args = { .listen_uri = "defer", .start_hook = test_migrate_precopy_tcp_multifd_zlib_start, }; test_precopy_common(&args); } #ifdef CONFIG_ZSTD static void test_multifd_tcp_zstd(void) { MigrateCommon args = { .listen_uri = "defer", .start_hook = test_migrate_precopy_tcp_multifd_zstd_start, }; test_precopy_common(&args); } #endif #ifdef CONFIG_GNUTLS static void * test_migrate_multifd_tcp_tls_psk_start_match(QTestState *from, QTestState *to) { test_migrate_precopy_tcp_multifd_start_common(from, to, "none"); return test_migrate_tls_psk_start_match(from, to); } static void * test_migrate_multifd_tcp_tls_psk_start_mismatch(QTestState *from, QTestState *to) { test_migrate_precopy_tcp_multifd_start_common(from, to, "none"); return test_migrate_tls_psk_start_mismatch(from, to); } #ifdef CONFIG_TASN1 static void * test_migrate_multifd_tls_x509_start_default_host(QTestState *from, QTestState *to) { test_migrate_precopy_tcp_multifd_start_common(from, to, "none"); return test_migrate_tls_x509_start_default_host(from, to); } static void * test_migrate_multifd_tls_x509_start_override_host(QTestState *from, QTestState *to) { test_migrate_precopy_tcp_multifd_start_common(from, to, "none"); return test_migrate_tls_x509_start_override_host(from, to); } static void * test_migrate_multifd_tls_x509_start_mismatch_host(QTestState *from, QTestState *to) { test_migrate_precopy_tcp_multifd_start_common(from, to, "none"); return test_migrate_tls_x509_start_mismatch_host(from, to); } static void * test_migrate_multifd_tls_x509_start_allow_anon_client(QTestState *from, QTestState *to) { test_migrate_precopy_tcp_multifd_start_common(from, to, "none"); return test_migrate_tls_x509_start_allow_anon_client(from, to); } static void * test_migrate_multifd_tls_x509_start_reject_anon_client(QTestState *from, QTestState *to) { test_migrate_precopy_tcp_multifd_start_common(from, to, "none"); return test_migrate_tls_x509_start_reject_anon_client(from, to); } #endif /* CONFIG_TASN1 */ static void test_multifd_tcp_tls_psk_match(void) { MigrateCommon args = { .listen_uri = "defer", .start_hook = test_migrate_multifd_tcp_tls_psk_start_match, .finish_hook = test_migrate_tls_psk_finish, }; test_precopy_common(&args); } static void test_multifd_tcp_tls_psk_mismatch(void) { MigrateCommon args = { .start = { .hide_stderr = true, }, .listen_uri = "defer", .start_hook = test_migrate_multifd_tcp_tls_psk_start_mismatch, .finish_hook = test_migrate_tls_psk_finish, .result = MIG_TEST_FAIL, }; test_precopy_common(&args); } #ifdef CONFIG_TASN1 static void test_multifd_tcp_tls_x509_default_host(void) { MigrateCommon args = { .listen_uri = "defer", .start_hook = test_migrate_multifd_tls_x509_start_default_host, .finish_hook = test_migrate_tls_x509_finish, }; test_precopy_common(&args); } static void test_multifd_tcp_tls_x509_override_host(void) { MigrateCommon args = { .listen_uri = "defer", .start_hook = test_migrate_multifd_tls_x509_start_override_host, .finish_hook = test_migrate_tls_x509_finish, }; test_precopy_common(&args); } static void test_multifd_tcp_tls_x509_mismatch_host(void) { /* * This has different behaviour to the non-multifd case. * * In non-multifd case when client aborts due to mismatched * cert host, the server has already started trying to load * migration state, and so it exits with I/O failure. * * In multifd case when client aborts due to mismatched * cert host, the server is still waiting for the other * multifd connections to arrive so hasn't started trying * to load migration state, and thus just aborts the migration * without exiting. */ MigrateCommon args = { .start = { .hide_stderr = true, }, .listen_uri = "defer", .start_hook = test_migrate_multifd_tls_x509_start_mismatch_host, .finish_hook = test_migrate_tls_x509_finish, .result = MIG_TEST_FAIL, }; test_precopy_common(&args); } static void test_multifd_tcp_tls_x509_allow_anon_client(void) { MigrateCommon args = { .listen_uri = "defer", .start_hook = test_migrate_multifd_tls_x509_start_allow_anon_client, .finish_hook = test_migrate_tls_x509_finish, }; test_precopy_common(&args); } static void test_multifd_tcp_tls_x509_reject_anon_client(void) { MigrateCommon args = { .start = { .hide_stderr = true, }, .listen_uri = "defer", .start_hook = test_migrate_multifd_tls_x509_start_reject_anon_client, .finish_hook = test_migrate_tls_x509_finish, .result = MIG_TEST_FAIL, }; test_precopy_common(&args); } #endif /* CONFIG_TASN1 */ #endif /* CONFIG_GNUTLS */ /* * This test does: * source target * migrate_incoming * migrate * migrate_cancel * launch another target * migrate * * And see that it works */ static void test_multifd_tcp_cancel(void) { MigrateStart args = { .hide_stderr = true, }; QTestState *from, *to, *to2; QDict *rsp; g_autofree char *uri = NULL; if (test_migrate_start(&from, &to, "defer", &args)) { return; } migrate_ensure_non_converge(from); migrate_set_parameter_int(from, "multifd-channels", 16); migrate_set_parameter_int(to, "multifd-channels", 16); migrate_set_capability(from, "multifd", true); migrate_set_capability(to, "multifd", true); /* Start incoming migration from the 1st socket */ rsp = wait_command(to, "{ 'execute': 'migrate-incoming'," " 'arguments': { 'uri': 'tcp:127.0.0.1:0' }}"); qobject_unref(rsp); /* Wait for the first serial output from the source */ wait_for_serial("src_serial"); uri = migrate_get_socket_address(to, "socket-address"); migrate_qmp(from, uri, "{}"); wait_for_migration_pass(from); migrate_cancel(from); /* Make sure QEMU process "to" exited */ qtest_set_expected_status(to, EXIT_FAILURE); qtest_wait_qemu(to); args = (MigrateStart){ .only_target = true, }; if (test_migrate_start(&from, &to2, "defer", &args)) { return; } migrate_set_parameter_int(to2, "multifd-channels", 16); migrate_set_capability(to2, "multifd", true); /* Start incoming migration from the 1st socket */ rsp = wait_command(to2, "{ 'execute': 'migrate-incoming'," " 'arguments': { 'uri': 'tcp:127.0.0.1:0' }}"); qobject_unref(rsp); g_free(uri); uri = migrate_get_socket_address(to2, "socket-address"); wait_for_migration_status(from, "cancelled", NULL); migrate_ensure_converge(from); migrate_qmp(from, uri, "{}"); wait_for_migration_pass(from); if (!got_stop) { qtest_qmp_eventwait(from, "STOP"); } qtest_qmp_eventwait(to2, "RESUME"); wait_for_serial("dest_serial"); wait_for_migration_complete(from); test_migrate_end(from, to2, true); } static void calc_dirty_rate(QTestState *who, uint64_t calc_time) { qobject_unref(qmp_command(who, "{ 'execute': 'calc-dirty-rate'," "'arguments': { " "'calc-time': %" PRIu64 "," "'mode': 'dirty-ring' }}", calc_time)); } static QDict *query_dirty_rate(QTestState *who) { return qmp_command(who, "{ 'execute': 'query-dirty-rate' }"); } static void dirtylimit_set_all(QTestState *who, uint64_t dirtyrate) { qobject_unref(qmp_command(who, "{ 'execute': 'set-vcpu-dirty-limit'," "'arguments': { " "'dirty-rate': %" PRIu64 " } }", dirtyrate)); } static void cancel_vcpu_dirty_limit(QTestState *who) { qobject_unref(qmp_command(who, "{ 'execute': 'cancel-vcpu-dirty-limit' }")); } static QDict *query_vcpu_dirty_limit(QTestState *who) { QDict *rsp; rsp = qtest_qmp(who, "{ 'execute': 'query-vcpu-dirty-limit' }"); g_assert(!qdict_haskey(rsp, "error")); g_assert(qdict_haskey(rsp, "return")); return rsp; } static bool calc_dirtyrate_ready(QTestState *who) { QDict *rsp_return; gchar *status; rsp_return = query_dirty_rate(who); g_assert(rsp_return); status = g_strdup(qdict_get_str(rsp_return, "status")); g_assert(status); return g_strcmp0(status, "measuring"); } static void wait_for_calc_dirtyrate_complete(QTestState *who, int64_t time_s) { int max_try_count = 10000; usleep(time_s * 1000000); while (!calc_dirtyrate_ready(who) && max_try_count--) { usleep(1000); } /* * Set the timeout with 10 s(max_try_count * 1000us), * if dirtyrate measurement not complete, fail test. */ g_assert_cmpint(max_try_count, !=, 0); } static int64_t get_dirty_rate(QTestState *who) { QDict *rsp_return; gchar *status; QList *rates; const QListEntry *entry; QDict *rate; int64_t dirtyrate; rsp_return = query_dirty_rate(who); g_assert(rsp_return); status = g_strdup(qdict_get_str(rsp_return, "status")); g_assert(status); g_assert_cmpstr(status, ==, "measured"); rates = qdict_get_qlist(rsp_return, "vcpu-dirty-rate"); g_assert(rates && !qlist_empty(rates)); entry = qlist_first(rates); g_assert(entry); rate = qobject_to(QDict, qlist_entry_obj(entry)); g_assert(rate); dirtyrate = qdict_get_try_int(rate, "dirty-rate", -1); qobject_unref(rsp_return); return dirtyrate; } static int64_t get_limit_rate(QTestState *who) { QDict *rsp_return; QList *rates; const QListEntry *entry; QDict *rate; int64_t dirtyrate; rsp_return = query_vcpu_dirty_limit(who); g_assert(rsp_return); rates = qdict_get_qlist(rsp_return, "return"); g_assert(rates && !qlist_empty(rates)); entry = qlist_first(rates); g_assert(entry); rate = qobject_to(QDict, qlist_entry_obj(entry)); g_assert(rate); dirtyrate = qdict_get_try_int(rate, "limit-rate", -1); qobject_unref(rsp_return); return dirtyrate; } static QTestState *dirtylimit_start_vm(void) { QTestState *vm = NULL; g_autofree gchar *cmd = NULL; const char *arch = qtest_get_arch(); g_autofree char *bootpath = NULL; assert((strcmp(arch, "x86_64") == 0)); bootpath = g_strdup_printf("%s/bootsect", tmpfs); assert(sizeof(x86_bootsect) == 512); init_bootfile(bootpath, x86_bootsect, sizeof(x86_bootsect)); cmd = g_strdup_printf("-accel kvm,dirty-ring-size=4096 " "-name dirtylimit-test,debug-threads=on " "-m 150M -smp 1 " "-serial file:%s/vm_serial " "-drive file=%s,format=raw ", tmpfs, bootpath); vm = qtest_init(cmd); return vm; } static void dirtylimit_stop_vm(QTestState *vm) { qtest_quit(vm); cleanup("bootsect"); cleanup("vm_serial"); } static void test_vcpu_dirty_limit(void) { QTestState *vm; int64_t origin_rate; int64_t quota_rate; int64_t rate ; int max_try_count = 20; int hit = 0; /* Start vm for vcpu dirtylimit test */ vm = dirtylimit_start_vm(); /* Wait for the first serial output from the vm*/ wait_for_serial("vm_serial"); /* Do dirtyrate measurement with calc time equals 1s */ calc_dirty_rate(vm, 1); /* Sleep calc time and wait for calc dirtyrate complete */ wait_for_calc_dirtyrate_complete(vm, 1); /* Query original dirty page rate */ origin_rate = get_dirty_rate(vm); /* VM booted from bootsect should dirty memory steadily */ assert(origin_rate != 0); /* Setup quota dirty page rate at half of origin */ quota_rate = origin_rate / 2; /* Set dirtylimit */ dirtylimit_set_all(vm, quota_rate); /* * Check if set-vcpu-dirty-limit and query-vcpu-dirty-limit * works literally */ g_assert_cmpint(quota_rate, ==, get_limit_rate(vm)); /* Sleep a bit to check if it take effect */ usleep(2000000); /* * Check if dirtylimit take effect realistically, set the * timeout with 20 s(max_try_count * 1s), if dirtylimit * doesn't take effect, fail test. */ while (--max_try_count) { calc_dirty_rate(vm, 1); wait_for_calc_dirtyrate_complete(vm, 1); rate = get_dirty_rate(vm); /* * Assume hitting if current rate is less * than quota rate (within accepting error) */ if (rate < (quota_rate + DIRTYLIMIT_TOLERANCE_RANGE)) { hit = 1; break; } } g_assert_cmpint(hit, ==, 1); hit = 0; max_try_count = 20; /* Check if dirtylimit cancellation take effect */ cancel_vcpu_dirty_limit(vm); while (--max_try_count) { calc_dirty_rate(vm, 1); wait_for_calc_dirtyrate_complete(vm, 1); rate = get_dirty_rate(vm); /* * Assume dirtylimit be canceled if current rate is * greater than quota rate (within accepting error) */ if (rate > (quota_rate + DIRTYLIMIT_TOLERANCE_RANGE)) { hit = 1; break; } } g_assert_cmpint(hit, ==, 1); dirtylimit_stop_vm(vm); } static bool kvm_dirty_ring_supported(void) { #if defined(__linux__) && defined(HOST_X86_64) int ret, kvm_fd = open("/dev/kvm", O_RDONLY); if (kvm_fd < 0) { return false; } ret = ioctl(kvm_fd, KVM_CHECK_EXTENSION, KVM_CAP_DIRTY_LOG_RING); close(kvm_fd); /* We test with 4096 slots */ if (ret < 4096) { return false; } return true; #else return false; #endif } int main(int argc, char **argv) { bool has_kvm; bool has_uffd; const char *arch; g_autoptr(GError) err = NULL; int ret; g_test_init(&argc, &argv, NULL); has_kvm = qtest_has_accel("kvm"); has_uffd = ufd_version_check(); arch = qtest_get_arch(); /* * On ppc64, the test only works with kvm-hv, but not with kvm-pr and TCG * is touchy due to race conditions on dirty bits (especially on PPC for * some reason) */ if (g_str_equal(arch, "ppc64") && (!has_kvm || access("/sys/module/kvm_hv", F_OK))) { g_test_message("Skipping test: kvm_hv not available"); return g_test_run(); } /* * Similar to ppc64, s390x seems to be touchy with TCG, so disable it * there until the problems are resolved */ if (g_str_equal(arch, "s390x") && !has_kvm) { g_test_message("Skipping test: s390x host with KVM is required"); return g_test_run(); } tmpfs = g_dir_make_tmp("migration-test-XXXXXX", &err); if (!tmpfs) { g_test_message("Can't create temporary directory in %s: %s", g_get_tmp_dir(), err->message); } g_assert(tmpfs); module_call_init(MODULE_INIT_QOM); if (has_uffd) { qtest_add_func("/migration/postcopy/plain", test_postcopy); qtest_add_func("/migration/postcopy/recovery/plain", test_postcopy_recovery); qtest_add_func("/migration/postcopy/preempt/plain", test_postcopy_preempt); qtest_add_func("/migration/postcopy/preempt/recovery/plain", test_postcopy_preempt_recovery); } qtest_add_func("/migration/bad_dest", test_baddest); qtest_add_func("/migration/precopy/unix/plain", test_precopy_unix_plain); qtest_add_func("/migration/precopy/unix/xbzrle", test_precopy_unix_xbzrle); #ifdef CONFIG_GNUTLS qtest_add_func("/migration/precopy/unix/tls/psk", test_precopy_unix_tls_psk); if (has_uffd) { /* * NOTE: psk test is enough for postcopy, as other types of TLS * channels are tested under precopy. Here what we want to test is the * general postcopy path that has TLS channel enabled. */ qtest_add_func("/migration/postcopy/tls/psk", test_postcopy_tls_psk); qtest_add_func("/migration/postcopy/recovery/tls/psk", test_postcopy_recovery_tls_psk); qtest_add_func("/migration/postcopy/preempt/tls/psk", test_postcopy_preempt_tls_psk); qtest_add_func("/migration/postcopy/preempt/recovery/tls/psk", test_postcopy_preempt_all); } #ifdef CONFIG_TASN1 qtest_add_func("/migration/precopy/unix/tls/x509/default-host", test_precopy_unix_tls_x509_default_host); qtest_add_func("/migration/precopy/unix/tls/x509/override-host", test_precopy_unix_tls_x509_override_host); #endif /* CONFIG_TASN1 */ #endif /* CONFIG_GNUTLS */ qtest_add_func("/migration/precopy/tcp/plain", test_precopy_tcp_plain); #ifdef CONFIG_GNUTLS qtest_add_func("/migration/precopy/tcp/tls/psk/match", test_precopy_tcp_tls_psk_match); qtest_add_func("/migration/precopy/tcp/tls/psk/mismatch", test_precopy_tcp_tls_psk_mismatch); #ifdef CONFIG_TASN1 qtest_add_func("/migration/precopy/tcp/tls/x509/default-host", test_precopy_tcp_tls_x509_default_host); qtest_add_func("/migration/precopy/tcp/tls/x509/override-host", test_precopy_tcp_tls_x509_override_host); qtest_add_func("/migration/precopy/tcp/tls/x509/mismatch-host", test_precopy_tcp_tls_x509_mismatch_host); qtest_add_func("/migration/precopy/tcp/tls/x509/friendly-client", test_precopy_tcp_tls_x509_friendly_client); qtest_add_func("/migration/precopy/tcp/tls/x509/hostile-client", test_precopy_tcp_tls_x509_hostile_client); qtest_add_func("/migration/precopy/tcp/tls/x509/allow-anon-client", test_precopy_tcp_tls_x509_allow_anon_client); qtest_add_func("/migration/precopy/tcp/tls/x509/reject-anon-client", test_precopy_tcp_tls_x509_reject_anon_client); #endif /* CONFIG_TASN1 */ #endif /* CONFIG_GNUTLS */ /* qtest_add_func("/migration/ignore_shared", test_ignore_shared); */ #ifndef _WIN32 qtest_add_func("/migration/fd_proto", test_migrate_fd_proto); #endif qtest_add_func("/migration/validate_uuid", test_validate_uuid); qtest_add_func("/migration/validate_uuid_error", test_validate_uuid_error); qtest_add_func("/migration/validate_uuid_src_not_set", test_validate_uuid_src_not_set); qtest_add_func("/migration/validate_uuid_dst_not_set", test_validate_uuid_dst_not_set); /* * See explanation why this test is slow on function definition */ if (g_test_slow()) { qtest_add_func("/migration/auto_converge", test_migrate_auto_converge); } qtest_add_func("/migration/multifd/tcp/plain/none", test_multifd_tcp_none); /* * This test is flaky and sometimes fails in CI and otherwise: * don't run unless user opts in via environment variable. */ if (getenv("QEMU_TEST_FLAKY_TESTS")) { qtest_add_func("/migration/multifd/tcp/plain/cancel", test_multifd_tcp_cancel); } qtest_add_func("/migration/multifd/tcp/plain/zlib", test_multifd_tcp_zlib); #ifdef CONFIG_ZSTD qtest_add_func("/migration/multifd/tcp/plain/zstd", test_multifd_tcp_zstd); #endif #ifdef CONFIG_GNUTLS qtest_add_func("/migration/multifd/tcp/tls/psk/match", test_multifd_tcp_tls_psk_match); qtest_add_func("/migration/multifd/tcp/tls/psk/mismatch", test_multifd_tcp_tls_psk_mismatch); #ifdef CONFIG_TASN1 qtest_add_func("/migration/multifd/tcp/tls/x509/default-host", test_multifd_tcp_tls_x509_default_host); qtest_add_func("/migration/multifd/tcp/tls/x509/override-host", test_multifd_tcp_tls_x509_override_host); qtest_add_func("/migration/multifd/tcp/tls/x509/mismatch-host", test_multifd_tcp_tls_x509_mismatch_host); qtest_add_func("/migration/multifd/tcp/tls/x509/allow-anon-client", test_multifd_tcp_tls_x509_allow_anon_client); qtest_add_func("/migration/multifd/tcp/tls/x509/reject-anon-client", test_multifd_tcp_tls_x509_reject_anon_client); #endif /* CONFIG_TASN1 */ #endif /* CONFIG_GNUTLS */ if (g_str_equal(arch, "x86_64") && has_kvm && kvm_dirty_ring_supported()) { qtest_add_func("/migration/dirty_ring", test_precopy_unix_dirty_ring); qtest_add_func("/migration/vcpu_dirty_limit", test_vcpu_dirty_limit); } ret = g_test_run(); g_assert_cmpint(ret, ==, 0); ret = rmdir(tmpfs); if (ret != 0) { g_test_message("unable to rmdir: path (%s): %s", tmpfs, strerror(errno)); } g_free(tmpfs); return ret; }