/* * QEMU ARM CP Register access and descriptions * * Copyright (c) 2022 Linaro Ltd * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see * */ #ifndef TARGET_ARM_CPREGS_H #define TARGET_ARM_CPREGS_H /* * ARMCPRegInfo type field bits: */ enum { /* * Register must be handled specially during translation. * The method is one of the values below: */ ARM_CP_SPECIAL_MASK = 0x000f, /* Special: no change to PE state: writes ignored, reads ignored. */ ARM_CP_NOP = 0x0001, /* Special: sysreg is WFI, for v5 and v6. */ ARM_CP_WFI = 0x0002, /* Special: sysreg is NZCV. */ ARM_CP_NZCV = 0x0003, /* Special: sysreg is CURRENTEL. */ ARM_CP_CURRENTEL = 0x0004, /* Special: sysreg is DC ZVA or similar. */ ARM_CP_DC_ZVA = 0x0005, ARM_CP_DC_GVA = 0x0006, ARM_CP_DC_GZVA = 0x0007, /* Flag: reads produce resetvalue; writes ignored. */ ARM_CP_CONST = 1 << 4, /* Flag: For ARM_CP_STATE_AA32, sysreg is 64-bit. */ ARM_CP_64BIT = 1 << 5, /* * Flag: TB should not be ended after a write to this register * (the default is that the TB ends after cp writes). */ ARM_CP_SUPPRESS_TB_END = 1 << 6, /* * Flag: Permit a register definition to override a previous definition * for the same (cp, is64, crn, crm, opc1, opc2) tuple: either the new * or the old must have the ARM_CP_OVERRIDE bit set. */ ARM_CP_OVERRIDE = 1 << 7, /* * Flag: Register is an alias view of some underlying state which is also * visible via another register, and that the other register is handling * migration and reset; registers marked ARM_CP_ALIAS will not be migrated * but may have their state set by syncing of register state from KVM. */ ARM_CP_ALIAS = 1 << 8, /* * Flag: Register does I/O and therefore its accesses need to be marked * with gen_io_start() and also end the TB. In particular, registers which * implement clocks or timers require this. */ ARM_CP_IO = 1 << 9, /* * Flag: Register has no underlying state and does not support raw access * for state saving/loading; it will not be used for either migration or * KVM state synchronization. Typically this is for "registers" which are * actually used as instructions for cache maintenance and so on. */ ARM_CP_NO_RAW = 1 << 10, /* * Flag: The read or write hook might raise an exception; the generated * code will synchronize the CPU state before calling the hook so that it * is safe for the hook to call raise_exception(). */ ARM_CP_RAISES_EXC = 1 << 11, /* * Flag: Writes to the sysreg might change the exception level - typically * on older ARM chips. For those cases we need to re-read the new el when * recomputing the translation flags. */ ARM_CP_NEWEL = 1 << 12, /* * Flag: Access check for this sysreg is identical to accessing FPU state * from an instruction: use translation fp_access_check(). */ ARM_CP_FPU = 1 << 13, /* * Flag: Access check for this sysreg is identical to accessing SVE state * from an instruction: use translation sve_access_check(). */ ARM_CP_SVE = 1 << 14, /* Flag: Do not expose in gdb sysreg xml. */ ARM_CP_NO_GDB = 1 << 15, }; /* * Valid values for ARMCPRegInfo state field, indicating which of * the AArch32 and AArch64 execution states this register is visible in. * If the reginfo doesn't explicitly specify then it is AArch32 only. * If the reginfo is declared to be visible in both states then a second * reginfo is synthesised for the AArch32 view of the AArch64 register, * such that the AArch32 view is the lower 32 bits of the AArch64 one. * Note that we rely on the values of these enums as we iterate through * the various states in some places. */ typedef enum { ARM_CP_STATE_AA32 = 0, ARM_CP_STATE_AA64 = 1, ARM_CP_STATE_BOTH = 2, } CPState; /* * ARM CP register secure state flags. These flags identify security state * attributes for a given CP register entry. * The existence of both or neither secure and non-secure flags indicates that * the register has both a secure and non-secure hash entry. A single one of * these flags causes the register to only be hashed for the specified * security state. * Although definitions may have any combination of the S/NS bits, each * registered entry will only have one to identify whether the entry is secure * or non-secure. */ typedef enum { ARM_CP_SECSTATE_BOTH = 0, /* define one cpreg for each secstate */ ARM_CP_SECSTATE_S = (1 << 0), /* bit[0]: Secure state register */ ARM_CP_SECSTATE_NS = (1 << 1), /* bit[1]: Non-secure state register */ } CPSecureState; /* * Access rights: * We define bits for Read and Write access for what rev C of the v7-AR ARM ARM * defines as PL0 (user), PL1 (fiq/irq/svc/abt/und/sys, ie privileged), and * PL2 (hyp). The other level which has Read and Write bits is Secure PL1 * (ie any of the privileged modes in Secure state, or Monitor mode). * If a register is accessible in one privilege level it's always accessible * in higher privilege levels too. Since "Secure PL1" also follows this rule * (ie anything visible in PL2 is visible in S-PL1, some things are only * visible in S-PL1) but "Secure PL1" is a bit of a mouthful, we bend the * terminology a little and call this PL3. * In AArch64 things are somewhat simpler as the PLx bits line up exactly * with the ELx exception levels. * * If access permissions for a register are more complex than can be * described with these bits, then use a laxer set of restrictions, and * do the more restrictive/complex check inside a helper function. */ typedef enum { PL3_R = 0x80, PL3_W = 0x40, PL2_R = 0x20 | PL3_R, PL2_W = 0x10 | PL3_W, PL1_R = 0x08 | PL2_R, PL1_W = 0x04 | PL2_W, PL0_R = 0x02 | PL1_R, PL0_W = 0x01 | PL1_W, /* * For user-mode some registers are accessible to EL0 via a kernel * trap-and-emulate ABI. In this case we define the read permissions * as actually being PL0_R. However some bits of any given register * may still be masked. */ #ifdef CONFIG_USER_ONLY PL0U_R = PL0_R, #else PL0U_R = PL1_R, #endif PL3_RW = PL3_R | PL3_W, PL2_RW = PL2_R | PL2_W, PL1_RW = PL1_R | PL1_W, PL0_RW = PL0_R | PL0_W, } CPAccessRights; typedef enum CPAccessResult { /* Access is permitted */ CP_ACCESS_OK = 0, /* * Combined with one of the following, the low 2 bits indicate the * target exception level. If 0, the exception is taken to the usual * target EL (EL1 or PL1 if in EL0, otherwise to the current EL). */ CP_ACCESS_EL_MASK = 3, /* * Access fails due to a configurable trap or enable which would * result in a categorized exception syndrome giving information about * the failing instruction (ie syndrome category 0x3, 0x4, 0x5, 0x6, * 0xc or 0x18). */ CP_ACCESS_TRAP = (1 << 2), CP_ACCESS_TRAP_EL2 = CP_ACCESS_TRAP | 2, CP_ACCESS_TRAP_EL3 = CP_ACCESS_TRAP | 3, /* * Access fails and results in an exception syndrome 0x0 ("uncategorized"). * Note that this is not a catch-all case -- the set of cases which may * result in this failure is specifically defined by the architecture. */ CP_ACCESS_TRAP_UNCATEGORIZED = (2 << 2), CP_ACCESS_TRAP_UNCATEGORIZED_EL2 = CP_ACCESS_TRAP_UNCATEGORIZED | 2, CP_ACCESS_TRAP_UNCATEGORIZED_EL3 = CP_ACCESS_TRAP_UNCATEGORIZED | 3, } CPAccessResult; typedef struct ARMCPRegInfo ARMCPRegInfo; /* * Access functions for coprocessor registers. These cannot fail and * may not raise exceptions. */ typedef uint64_t CPReadFn(CPUARMState *env, const ARMCPRegInfo *opaque); typedef void CPWriteFn(CPUARMState *env, const ARMCPRegInfo *opaque, uint64_t value); /* Access permission check functions for coprocessor registers. */ typedef CPAccessResult CPAccessFn(CPUARMState *env, const ARMCPRegInfo *opaque, bool isread); /* Hook function for register reset */ typedef void CPResetFn(CPUARMState *env, const ARMCPRegInfo *opaque); #define CP_ANY 0xff /* Definition of an ARM coprocessor register */ struct ARMCPRegInfo { /* Name of register (useful mainly for debugging, need not be unique) */ const char *name; /* * Location of register: coprocessor number and (crn,crm,opc1,opc2) * tuple. Any of crm, opc1 and opc2 may be CP_ANY to indicate a * 'wildcard' field -- any value of that field in the MRC/MCR insn * will be decoded to this register. The register read and write * callbacks will be passed an ARMCPRegInfo with the crn/crm/opc1/opc2 * used by the program, so it is possible to register a wildcard and * then behave differently on read/write if necessary. * For 64 bit registers, only crm and opc1 are relevant; crn and opc2 * must both be zero. * For AArch64-visible registers, opc0 is also used. * Since there are no "coprocessors" in AArch64, cp is purely used as a * way to distinguish (for KVM's benefit) guest-visible system registers * from demuxed ones provided to preserve the "no side effects on * KVM register read/write from QEMU" semantics. cp==0x13 is guest * visible (to match KVM's encoding); cp==0 will be converted to * cp==0x13 when the ARMCPRegInfo is registered, for convenience. */ uint8_t cp; uint8_t crn; uint8_t crm; uint8_t opc0; uint8_t opc1; uint8_t opc2; /* Execution state in which this register is visible: ARM_CP_STATE_* */ CPState state; /* Register type: ARM_CP_* bits/values */ int type; /* Access rights: PL*_[RW] */ CPAccessRights access; /* Security state: ARM_CP_SECSTATE_* bits/values */ CPSecureState secure; /* * The opaque pointer passed to define_arm_cp_regs_with_opaque() when * this register was defined: can be used to hand data through to the * register read/write functions, since they are passed the ARMCPRegInfo*. */ void *opaque; /* * Value of this register, if it is ARM_CP_CONST. Otherwise, if * fieldoffset is non-zero, the reset value of the register. */ uint64_t resetvalue; /* * Offset of the field in CPUARMState for this register. * This is not needed if either: * 1. type is ARM_CP_CONST or one of the ARM_CP_SPECIALs * 2. both readfn and writefn are specified */ ptrdiff_t fieldoffset; /* offsetof(CPUARMState, field) */ /* * Offsets of the secure and non-secure fields in CPUARMState for the * register if it is banked. These fields are only used during the static * registration of a register. During hashing the bank associated * with a given security state is copied to fieldoffset which is used from * there on out. * * It is expected that register definitions use either fieldoffset or * bank_fieldoffsets in the definition but not both. It is also expected * that both bank offsets are set when defining a banked register. This * use indicates that a register is banked. */ ptrdiff_t bank_fieldoffsets[2]; /* * Function for making any access checks for this register in addition to * those specified by the 'access' permissions bits. If NULL, no extra * checks required. The access check is performed at runtime, not at * translate time. */ CPAccessFn *accessfn; /* * Function for handling reads of this register. If NULL, then reads * will be done by loading from the offset into CPUARMState specified * by fieldoffset. */ CPReadFn *readfn; /* * Function for handling writes of this register. If NULL, then writes * will be done by writing to the offset into CPUARMState specified * by fieldoffset. */ CPWriteFn *writefn; /* * Function for doing a "raw" read; used when we need to copy * coprocessor state to the kernel for KVM or out for * migration. This only needs to be provided if there is also a * readfn and it has side effects (for instance clear-on-read bits). */ CPReadFn *raw_readfn; /* * Function for doing a "raw" write; used when we need to copy KVM * kernel coprocessor state into userspace, or for inbound * migration. This only needs to be provided if there is also a * writefn and it masks out "unwritable" bits or has write-one-to-clear * or similar behaviour. */ CPWriteFn *raw_writefn; /* * Function for resetting the register. If NULL, then reset will be done * by writing resetvalue to the field specified in fieldoffset. If * fieldoffset is 0 then no reset will be done. */ CPResetFn *resetfn; /* * "Original" writefn and readfn. * For ARMv8.1-VHE register aliases, we overwrite the read/write * accessor functions of various EL1/EL0 to perform the runtime * check for which sysreg should actually be modified, and then * forwards the operation. Before overwriting the accessors, * the original function is copied here, so that accesses that * really do go to the EL1/EL0 version proceed normally. * (The corresponding EL2 register is linked via opaque.) */ CPReadFn *orig_readfn; CPWriteFn *orig_writefn; }; /* * Macros which are lvalues for the field in CPUARMState for the * ARMCPRegInfo *ri. */ #define CPREG_FIELD32(env, ri) \ (*(uint32_t *)((char *)(env) + (ri)->fieldoffset)) #define CPREG_FIELD64(env, ri) \ (*(uint64_t *)((char *)(env) + (ri)->fieldoffset)) void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, const ARMCPRegInfo *reg, void *opaque); static inline void define_one_arm_cp_reg(ARMCPU *cpu, const ARMCPRegInfo *regs) { define_one_arm_cp_reg_with_opaque(cpu, regs, NULL); } void define_arm_cp_regs_with_opaque_len(ARMCPU *cpu, const ARMCPRegInfo *regs, void *opaque, size_t len); #define define_arm_cp_regs_with_opaque(CPU, REGS, OPAQUE) \ do { \ QEMU_BUILD_BUG_ON(ARRAY_SIZE(REGS) == 0); \ define_arm_cp_regs_with_opaque_len(CPU, REGS, OPAQUE, \ ARRAY_SIZE(REGS)); \ } while (0) #define define_arm_cp_regs(CPU, REGS) \ define_arm_cp_regs_with_opaque(CPU, REGS, NULL) const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp); /* * Definition of an ARM co-processor register as viewed from * userspace. This is used for presenting sanitised versions of * registers to userspace when emulating the Linux AArch64 CPU * ID/feature ABI (advertised as HWCAP_CPUID). */ typedef struct ARMCPRegUserSpaceInfo { /* Name of register */ const char *name; /* Is the name actually a glob pattern */ bool is_glob; /* Only some bits are exported to user space */ uint64_t exported_bits; /* Fixed bits are applied after the mask */ uint64_t fixed_bits; } ARMCPRegUserSpaceInfo; void modify_arm_cp_regs_with_len(ARMCPRegInfo *regs, size_t regs_len, const ARMCPRegUserSpaceInfo *mods, size_t mods_len); #define modify_arm_cp_regs(REGS, MODS) \ do { \ QEMU_BUILD_BUG_ON(ARRAY_SIZE(REGS) == 0); \ QEMU_BUILD_BUG_ON(ARRAY_SIZE(MODS) == 0); \ modify_arm_cp_regs_with_len(REGS, ARRAY_SIZE(REGS), \ MODS, ARRAY_SIZE(MODS)); \ } while (0) /* CPWriteFn that can be used to implement writes-ignored behaviour */ void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value); /* CPReadFn that can be used for read-as-zero behaviour */ uint64_t arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri); /* * CPResetFn that does nothing, for use if no reset is required even * if fieldoffset is non zero. */ void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque); /* * Return true if this reginfo struct's field in the cpu state struct * is 64 bits wide. */ static inline bool cpreg_field_is_64bit(const ARMCPRegInfo *ri) { return (ri->state == ARM_CP_STATE_AA64) || (ri->type & ARM_CP_64BIT); } static inline bool cp_access_ok(int current_el, const ARMCPRegInfo *ri, int isread) { return (ri->access >> ((current_el * 2) + isread)) & 1; } /* Raw read of a coprocessor register (as needed for migration, etc) */ uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri); #endif /* TARGET_ARM_CPREGS_H */