/* * ARM Aspeed I2C controller * * Copyright (C) 2016 IBM Corp. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * */ #include "qemu/osdep.h" #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/log.h" #include "qemu/module.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "hw/i2c/aspeed_i2c.h" #include "hw/irq.h" #include "hw/qdev-properties.h" #include "trace.h" /* I2C Global Register */ #define I2C_CTRL_STATUS 0x00 /* Device Interrupt Status */ #define I2C_CTRL_ASSIGN 0x08 /* Device Interrupt Target Assignment */ #define I2C_CTRL_GLOBAL 0x0C /* Global Control Register */ #define I2C_CTRL_SRAM_EN BIT(0) /* I2C Device (Bus) Register */ #define I2CD_FUN_CTRL_REG 0x00 /* I2CD Function Control */ #define I2CD_POOL_PAGE_SEL(x) (((x) >> 20) & 0x7) /* AST2400 */ #define I2CD_M_SDA_LOCK_EN (0x1 << 16) #define I2CD_MULTI_MASTER_DIS (0x1 << 15) #define I2CD_M_SCL_DRIVE_EN (0x1 << 14) #define I2CD_MSB_STS (0x1 << 9) #define I2CD_SDA_DRIVE_1T_EN (0x1 << 8) #define I2CD_M_SDA_DRIVE_1T_EN (0x1 << 7) #define I2CD_M_HIGH_SPEED_EN (0x1 << 6) #define I2CD_DEF_ADDR_EN (0x1 << 5) #define I2CD_DEF_ALERT_EN (0x1 << 4) #define I2CD_DEF_ARP_EN (0x1 << 3) #define I2CD_DEF_GCALL_EN (0x1 << 2) #define I2CD_SLAVE_EN (0x1 << 1) #define I2CD_MASTER_EN (0x1) #define I2CD_AC_TIMING_REG1 0x04 /* Clock and AC Timing Control #1 */ #define I2CD_AC_TIMING_REG2 0x08 /* Clock and AC Timing Control #1 */ #define I2CD_INTR_CTRL_REG 0x0c /* I2CD Interrupt Control */ #define I2CD_INTR_STS_REG 0x10 /* I2CD Interrupt Status */ #define I2CD_INTR_SLAVE_ADDR_MATCH (0x1 << 31) /* 0: addr1 1: addr2 */ #define I2CD_INTR_SLAVE_ADDR_RX_PENDING (0x1 << 30) /* bits[19-16] Reserved */ /* All bits below are cleared by writing 1 */ #define I2CD_INTR_SLAVE_INACTIVE_TIMEOUT (0x1 << 15) #define I2CD_INTR_SDA_DL_TIMEOUT (0x1 << 14) #define I2CD_INTR_BUS_RECOVER_DONE (0x1 << 13) #define I2CD_INTR_SMBUS_ALERT (0x1 << 12) /* Bus [0-3] only */ #define I2CD_INTR_SMBUS_ARP_ADDR (0x1 << 11) /* Removed */ #define I2CD_INTR_SMBUS_DEV_ALERT_ADDR (0x1 << 10) /* Removed */ #define I2CD_INTR_SMBUS_DEF_ADDR (0x1 << 9) /* Removed */ #define I2CD_INTR_GCALL_ADDR (0x1 << 8) /* Removed */ #define I2CD_INTR_SLAVE_ADDR_RX_MATCH (0x1 << 7) /* use RX_DONE */ #define I2CD_INTR_SCL_TIMEOUT (0x1 << 6) #define I2CD_INTR_ABNORMAL (0x1 << 5) #define I2CD_INTR_NORMAL_STOP (0x1 << 4) #define I2CD_INTR_ARBIT_LOSS (0x1 << 3) #define I2CD_INTR_RX_DONE (0x1 << 2) #define I2CD_INTR_TX_NAK (0x1 << 1) #define I2CD_INTR_TX_ACK (0x1 << 0) #define I2CD_CMD_REG 0x14 /* I2CD Command/Status */ #define I2CD_SDA_OE (0x1 << 28) #define I2CD_SDA_O (0x1 << 27) #define I2CD_SCL_OE (0x1 << 26) #define I2CD_SCL_O (0x1 << 25) #define I2CD_TX_TIMING (0x1 << 24) #define I2CD_TX_STATUS (0x1 << 23) #define I2CD_TX_STATE_SHIFT 19 /* Tx State Machine */ #define I2CD_TX_STATE_MASK 0xf #define I2CD_IDLE 0x0 #define I2CD_MACTIVE 0x8 #define I2CD_MSTART 0x9 #define I2CD_MSTARTR 0xa #define I2CD_MSTOP 0xb #define I2CD_MTXD 0xc #define I2CD_MRXACK 0xd #define I2CD_MRXD 0xe #define I2CD_MTXACK 0xf #define I2CD_SWAIT 0x1 #define I2CD_SRXD 0x4 #define I2CD_STXACK 0x5 #define I2CD_STXD 0x6 #define I2CD_SRXACK 0x7 #define I2CD_RECOVER 0x3 #define I2CD_SCL_LINE_STS (0x1 << 18) #define I2CD_SDA_LINE_STS (0x1 << 17) #define I2CD_BUS_BUSY_STS (0x1 << 16) #define I2CD_SDA_OE_OUT_DIR (0x1 << 15) #define I2CD_SDA_O_OUT_DIR (0x1 << 14) #define I2CD_SCL_OE_OUT_DIR (0x1 << 13) #define I2CD_SCL_O_OUT_DIR (0x1 << 12) #define I2CD_BUS_RECOVER_CMD_EN (0x1 << 11) #define I2CD_S_ALT_EN (0x1 << 10) /* Command Bit */ #define I2CD_RX_DMA_ENABLE (0x1 << 9) #define I2CD_TX_DMA_ENABLE (0x1 << 8) #define I2CD_RX_BUFF_ENABLE (0x1 << 7) #define I2CD_TX_BUFF_ENABLE (0x1 << 6) #define I2CD_M_STOP_CMD (0x1 << 5) #define I2CD_M_S_RX_CMD_LAST (0x1 << 4) #define I2CD_M_RX_CMD (0x1 << 3) #define I2CD_S_TX_CMD (0x1 << 2) #define I2CD_M_TX_CMD (0x1 << 1) #define I2CD_M_START_CMD (0x1) #define I2CD_DEV_ADDR_REG 0x18 /* Slave Device Address */ #define I2CD_POOL_CTRL_REG 0x1c /* Pool Buffer Control */ #define I2CD_POOL_RX_COUNT(x) (((x) >> 24) & 0xff) #define I2CD_POOL_RX_SIZE(x) ((((x) >> 16) & 0xff) + 1) #define I2CD_POOL_TX_COUNT(x) ((((x) >> 8) & 0xff) + 1) #define I2CD_POOL_OFFSET(x) (((x) & 0x3f) << 2) /* AST2400 */ #define I2CD_BYTE_BUF_REG 0x20 /* Transmit/Receive Byte Buffer */ #define I2CD_BYTE_BUF_TX_SHIFT 0 #define I2CD_BYTE_BUF_TX_MASK 0xff #define I2CD_BYTE_BUF_RX_SHIFT 8 #define I2CD_BYTE_BUF_RX_MASK 0xff #define I2CD_DMA_ADDR 0x24 /* DMA Buffer Address */ #define I2CD_DMA_LEN 0x28 /* DMA Transfer Length < 4KB */ static inline bool aspeed_i2c_bus_is_master(AspeedI2CBus *bus) { return bus->ctrl & I2CD_MASTER_EN; } static inline bool aspeed_i2c_bus_is_enabled(AspeedI2CBus *bus) { return bus->ctrl & (I2CD_MASTER_EN | I2CD_SLAVE_EN); } static inline void aspeed_i2c_bus_raise_interrupt(AspeedI2CBus *bus) { AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); trace_aspeed_i2c_bus_raise_interrupt(bus->intr_status, bus->intr_status & I2CD_INTR_TX_NAK ? "nak|" : "", bus->intr_status & I2CD_INTR_TX_ACK ? "ack|" : "", bus->intr_status & I2CD_INTR_RX_DONE ? "done|" : "", bus->intr_status & I2CD_INTR_NORMAL_STOP ? "normal|" : "", bus->intr_status & I2CD_INTR_ABNORMAL ? "abnormal" : ""); bus->intr_status &= bus->intr_ctrl; if (bus->intr_status) { bus->controller->intr_status |= 1 << bus->id; qemu_irq_raise(aic->bus_get_irq(bus)); } } static uint64_t aspeed_i2c_bus_read(void *opaque, hwaddr offset, unsigned size) { AspeedI2CBus *bus = opaque; AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); uint64_t value = -1; switch (offset) { case I2CD_FUN_CTRL_REG: value = bus->ctrl; break; case I2CD_AC_TIMING_REG1: value = bus->timing[0]; break; case I2CD_AC_TIMING_REG2: value = bus->timing[1]; break; case I2CD_INTR_CTRL_REG: value = bus->intr_ctrl; break; case I2CD_INTR_STS_REG: value = bus->intr_status; break; case I2CD_POOL_CTRL_REG: value = bus->pool_ctrl; break; case I2CD_BYTE_BUF_REG: value = bus->buf; break; case I2CD_CMD_REG: value = bus->cmd | (i2c_bus_busy(bus->bus) << 16); break; case I2CD_DMA_ADDR: if (!aic->has_dma) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); break; } value = bus->dma_addr; break; case I2CD_DMA_LEN: if (!aic->has_dma) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); break; } value = bus->dma_len; break; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset); value = -1; break; } trace_aspeed_i2c_bus_read(bus->id, offset, size, value); return value; } static void aspeed_i2c_set_state(AspeedI2CBus *bus, uint8_t state) { bus->cmd &= ~(I2CD_TX_STATE_MASK << I2CD_TX_STATE_SHIFT); bus->cmd |= (state & I2CD_TX_STATE_MASK) << I2CD_TX_STATE_SHIFT; } static uint8_t aspeed_i2c_get_state(AspeedI2CBus *bus) { return (bus->cmd >> I2CD_TX_STATE_SHIFT) & I2CD_TX_STATE_MASK; } static int aspeed_i2c_dma_read(AspeedI2CBus *bus, uint8_t *data) { MemTxResult result; AspeedI2CState *s = bus->controller; result = address_space_read(&s->dram_as, bus->dma_addr, MEMTXATTRS_UNSPECIFIED, data, 1); if (result != MEMTX_OK) { qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM read failed @%08x\n", __func__, bus->dma_addr); return -1; } bus->dma_addr++; bus->dma_len--; return 0; } static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t pool_start) { AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); int ret = -1; int i; if (bus->cmd & I2CD_TX_BUFF_ENABLE) { for (i = pool_start; i < I2CD_POOL_TX_COUNT(bus->pool_ctrl); i++) { uint8_t *pool_base = aic->bus_pool_base(bus); trace_aspeed_i2c_bus_send("BUF", i + 1, I2CD_POOL_TX_COUNT(bus->pool_ctrl), pool_base[i]); ret = i2c_send(bus->bus, pool_base[i]); if (ret) { break; } } bus->cmd &= ~I2CD_TX_BUFF_ENABLE; } else if (bus->cmd & I2CD_TX_DMA_ENABLE) { while (bus->dma_len) { uint8_t data; aspeed_i2c_dma_read(bus, &data); trace_aspeed_i2c_bus_send("DMA", bus->dma_len, bus->dma_len, data); ret = i2c_send(bus->bus, data); if (ret) { break; } } bus->cmd &= ~I2CD_TX_DMA_ENABLE; } else { trace_aspeed_i2c_bus_send("BYTE", pool_start, 1, bus->buf); ret = i2c_send(bus->bus, bus->buf); } return ret; } static void aspeed_i2c_bus_recv(AspeedI2CBus *bus) { AspeedI2CState *s = bus->controller; AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); uint8_t data; int i; if (bus->cmd & I2CD_RX_BUFF_ENABLE) { uint8_t *pool_base = aic->bus_pool_base(bus); for (i = 0; i < I2CD_POOL_RX_SIZE(bus->pool_ctrl); i++) { pool_base[i] = i2c_recv(bus->bus); trace_aspeed_i2c_bus_recv("BUF", i + 1, I2CD_POOL_RX_SIZE(bus->pool_ctrl), pool_base[i]); } /* Update RX count */ bus->pool_ctrl &= ~(0xff << 24); bus->pool_ctrl |= (i & 0xff) << 24; bus->cmd &= ~I2CD_RX_BUFF_ENABLE; } else if (bus->cmd & I2CD_RX_DMA_ENABLE) { uint8_t data; while (bus->dma_len) { MemTxResult result; data = i2c_recv(bus->bus); trace_aspeed_i2c_bus_recv("DMA", bus->dma_len, bus->dma_len, data); result = address_space_write(&s->dram_as, bus->dma_addr, MEMTXATTRS_UNSPECIFIED, &data, 1); if (result != MEMTX_OK) { qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM write failed @%08x\n", __func__, bus->dma_addr); return; } bus->dma_addr++; bus->dma_len--; } bus->cmd &= ~I2CD_RX_DMA_ENABLE; } else { data = i2c_recv(bus->bus); trace_aspeed_i2c_bus_recv("BYTE", 1, 1, bus->buf); bus->buf = (data & I2CD_BYTE_BUF_RX_MASK) << I2CD_BYTE_BUF_RX_SHIFT; } } static void aspeed_i2c_handle_rx_cmd(AspeedI2CBus *bus) { aspeed_i2c_set_state(bus, I2CD_MRXD); aspeed_i2c_bus_recv(bus); bus->intr_status |= I2CD_INTR_RX_DONE; if (bus->cmd & I2CD_M_S_RX_CMD_LAST) { i2c_nack(bus->bus); } bus->cmd &= ~(I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST); aspeed_i2c_set_state(bus, I2CD_MACTIVE); } static uint8_t aspeed_i2c_get_addr(AspeedI2CBus *bus) { AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); if (bus->cmd & I2CD_TX_BUFF_ENABLE) { uint8_t *pool_base = aic->bus_pool_base(bus); return pool_base[0]; } else if (bus->cmd & I2CD_TX_DMA_ENABLE) { uint8_t data; aspeed_i2c_dma_read(bus, &data); return data; } else { return bus->buf; } } static bool aspeed_i2c_check_sram(AspeedI2CBus *bus) { AspeedI2CState *s = bus->controller; AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); if (!aic->check_sram) { return true; } /* * AST2500: SRAM must be enabled before using the Buffer Pool or * DMA mode. */ if (!(s->ctrl_global & I2C_CTRL_SRAM_EN) && (bus->cmd & (I2CD_RX_DMA_ENABLE | I2CD_TX_DMA_ENABLE | I2CD_RX_BUFF_ENABLE | I2CD_TX_BUFF_ENABLE))) { qemu_log_mask(LOG_GUEST_ERROR, "%s: SRAM is not enabled\n", __func__); return false; } return true; } static void aspeed_i2c_bus_cmd_dump(AspeedI2CBus *bus) { g_autofree char *cmd_flags = NULL; uint32_t count; if (bus->cmd & (I2CD_RX_BUFF_ENABLE | I2CD_RX_BUFF_ENABLE)) { count = I2CD_POOL_TX_COUNT(bus->pool_ctrl); } else if (bus->cmd & (I2CD_RX_DMA_ENABLE | I2CD_RX_DMA_ENABLE)) { count = bus->dma_len; } else { /* BYTE mode */ count = 1; } cmd_flags = g_strdup_printf("%s%s%s%s%s%s%s%s%s", bus->cmd & I2CD_M_START_CMD ? "start|" : "", bus->cmd & I2CD_RX_DMA_ENABLE ? "rxdma|" : "", bus->cmd & I2CD_TX_DMA_ENABLE ? "txdma|" : "", bus->cmd & I2CD_RX_BUFF_ENABLE ? "rxbuf|" : "", bus->cmd & I2CD_TX_BUFF_ENABLE ? "txbuf|" : "", bus->cmd & I2CD_M_TX_CMD ? "tx|" : "", bus->cmd & I2CD_M_RX_CMD ? "rx|" : "", bus->cmd & I2CD_M_S_RX_CMD_LAST ? "last|" : "", bus->cmd & I2CD_M_STOP_CMD ? "stop" : ""); trace_aspeed_i2c_bus_cmd(bus->cmd, cmd_flags, count, bus->intr_status); } /* * The state machine needs some refinement. It is only used to track * invalid STOP commands for the moment. */ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, uint64_t value) { uint8_t pool_start = 0; bus->cmd &= ~0xFFFF; bus->cmd |= value & 0xFFFF; if (!aspeed_i2c_check_sram(bus)) { return; } if (trace_event_get_state_backends(TRACE_ASPEED_I2C_BUS_CMD)) { aspeed_i2c_bus_cmd_dump(bus); } if (bus->cmd & I2CD_M_START_CMD) { uint8_t state = aspeed_i2c_get_state(bus) & I2CD_MACTIVE ? I2CD_MSTARTR : I2CD_MSTART; uint8_t addr; aspeed_i2c_set_state(bus, state); addr = aspeed_i2c_get_addr(bus); if (i2c_start_transfer(bus->bus, extract32(addr, 1, 7), extract32(addr, 0, 1))) { bus->intr_status |= I2CD_INTR_TX_NAK; } else { bus->intr_status |= I2CD_INTR_TX_ACK; } bus->cmd &= ~I2CD_M_START_CMD; /* * The START command is also a TX command, as the slave * address is sent on the bus. Drop the TX flag if nothing * else needs to be sent in this sequence. */ if (bus->cmd & I2CD_TX_BUFF_ENABLE) { if (I2CD_POOL_TX_COUNT(bus->pool_ctrl) == 1) { bus->cmd &= ~I2CD_M_TX_CMD; } else { /* * Increase the start index in the TX pool buffer to * skip the address byte. */ pool_start++; } } else if (bus->cmd & I2CD_TX_DMA_ENABLE) { if (bus->dma_len == 0) { bus->cmd &= ~I2CD_M_TX_CMD; } } else { bus->cmd &= ~I2CD_M_TX_CMD; } /* No slave found */ if (!i2c_bus_busy(bus->bus)) { return; } aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if (bus->cmd & I2CD_M_TX_CMD) { aspeed_i2c_set_state(bus, I2CD_MTXD); if (aspeed_i2c_bus_send(bus, pool_start)) { bus->intr_status |= (I2CD_INTR_TX_NAK); i2c_end_transfer(bus->bus); } else { bus->intr_status |= I2CD_INTR_TX_ACK; } bus->cmd &= ~I2CD_M_TX_CMD; aspeed_i2c_set_state(bus, I2CD_MACTIVE); } if ((bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST)) && !(bus->intr_status & I2CD_INTR_RX_DONE)) { aspeed_i2c_handle_rx_cmd(bus); } if (bus->cmd & I2CD_M_STOP_CMD) { if (!(aspeed_i2c_get_state(bus) & I2CD_MACTIVE)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: abnormal stop\n", __func__); bus->intr_status |= I2CD_INTR_ABNORMAL; } else { aspeed_i2c_set_state(bus, I2CD_MSTOP); i2c_end_transfer(bus->bus); bus->intr_status |= I2CD_INTR_NORMAL_STOP; } bus->cmd &= ~I2CD_M_STOP_CMD; aspeed_i2c_set_state(bus, I2CD_IDLE); } } static void aspeed_i2c_bus_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { AspeedI2CBus *bus = opaque; AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(bus->controller); bool handle_rx; trace_aspeed_i2c_bus_write(bus->id, offset, size, value); switch (offset) { case I2CD_FUN_CTRL_REG: if (value & I2CD_SLAVE_EN) { qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n", __func__); break; } bus->ctrl = value & 0x0071C3FF; break; case I2CD_AC_TIMING_REG1: bus->timing[0] = value & 0xFFFFF0F; break; case I2CD_AC_TIMING_REG2: bus->timing[1] = value & 0x7; break; case I2CD_INTR_CTRL_REG: bus->intr_ctrl = value & 0x7FFF; break; case I2CD_INTR_STS_REG: handle_rx = (bus->intr_status & I2CD_INTR_RX_DONE) && (value & I2CD_INTR_RX_DONE); bus->intr_status &= ~(value & 0x7FFF); if (!bus->intr_status) { bus->controller->intr_status &= ~(1 << bus->id); qemu_irq_lower(aic->bus_get_irq(bus)); } if (handle_rx && (bus->cmd & (I2CD_M_RX_CMD | I2CD_M_S_RX_CMD_LAST))) { aspeed_i2c_handle_rx_cmd(bus); aspeed_i2c_bus_raise_interrupt(bus); } break; case I2CD_DEV_ADDR_REG: qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n", __func__); break; case I2CD_POOL_CTRL_REG: bus->pool_ctrl &= ~0xffffff; bus->pool_ctrl |= (value & 0xffffff); break; case I2CD_BYTE_BUF_REG: bus->buf = (value & I2CD_BYTE_BUF_TX_MASK) << I2CD_BYTE_BUF_TX_SHIFT; break; case I2CD_CMD_REG: if (!aspeed_i2c_bus_is_enabled(bus)) { break; } if (!aspeed_i2c_bus_is_master(bus)) { qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n", __func__); break; } if (!aic->has_dma && value & (I2CD_RX_DMA_ENABLE | I2CD_TX_DMA_ENABLE)) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); break; } aspeed_i2c_bus_handle_cmd(bus, value); aspeed_i2c_bus_raise_interrupt(bus); break; case I2CD_DMA_ADDR: if (!aic->has_dma) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); break; } bus->dma_addr = value & 0x3ffffffc; break; case I2CD_DMA_LEN: if (!aic->has_dma) { qemu_log_mask(LOG_GUEST_ERROR, "%s: No DMA support\n", __func__); break; } bus->dma_len = value & 0xfff; if (!bus->dma_len) { qemu_log_mask(LOG_UNIMP, "%s: invalid DMA length\n", __func__); } break; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset); } } static uint64_t aspeed_i2c_ctrl_read(void *opaque, hwaddr offset, unsigned size) { AspeedI2CState *s = opaque; switch (offset) { case I2C_CTRL_STATUS: return s->intr_status; case I2C_CTRL_GLOBAL: return s->ctrl_global; default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset); break; } return -1; } static void aspeed_i2c_ctrl_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { AspeedI2CState *s = opaque; switch (offset) { case I2C_CTRL_GLOBAL: s->ctrl_global = value; break; case I2C_CTRL_STATUS: default: qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, offset); break; } } static const MemoryRegionOps aspeed_i2c_bus_ops = { .read = aspeed_i2c_bus_read, .write = aspeed_i2c_bus_write, .endianness = DEVICE_LITTLE_ENDIAN, }; static const MemoryRegionOps aspeed_i2c_ctrl_ops = { .read = aspeed_i2c_ctrl_read, .write = aspeed_i2c_ctrl_write, .endianness = DEVICE_LITTLE_ENDIAN, }; static uint64_t aspeed_i2c_pool_read(void *opaque, hwaddr offset, unsigned size) { AspeedI2CState *s = opaque; uint64_t ret = 0; int i; for (i = 0; i < size; i++) { ret |= (uint64_t) s->pool[offset + i] << (8 * i); } return ret; } static void aspeed_i2c_pool_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { AspeedI2CState *s = opaque; int i; for (i = 0; i < size; i++) { s->pool[offset + i] = (value >> (8 * i)) & 0xFF; } } static const MemoryRegionOps aspeed_i2c_pool_ops = { .read = aspeed_i2c_pool_read, .write = aspeed_i2c_pool_write, .endianness = DEVICE_LITTLE_ENDIAN, .valid = { .min_access_size = 1, .max_access_size = 4, }, }; static const VMStateDescription aspeed_i2c_bus_vmstate = { .name = TYPE_ASPEED_I2C, .version_id = 3, .minimum_version_id = 3, .fields = (VMStateField[]) { VMSTATE_UINT8(id, AspeedI2CBus), VMSTATE_UINT32(ctrl, AspeedI2CBus), VMSTATE_UINT32_ARRAY(timing, AspeedI2CBus, 2), VMSTATE_UINT32(intr_ctrl, AspeedI2CBus), VMSTATE_UINT32(intr_status, AspeedI2CBus), VMSTATE_UINT32(cmd, AspeedI2CBus), VMSTATE_UINT32(buf, AspeedI2CBus), VMSTATE_UINT32(pool_ctrl, AspeedI2CBus), VMSTATE_UINT32(dma_addr, AspeedI2CBus), VMSTATE_UINT32(dma_len, AspeedI2CBus), VMSTATE_END_OF_LIST() } }; static const VMStateDescription aspeed_i2c_vmstate = { .name = TYPE_ASPEED_I2C, .version_id = 2, .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32(intr_status, AspeedI2CState), VMSTATE_STRUCT_ARRAY(busses, AspeedI2CState, ASPEED_I2C_NR_BUSSES, 1, aspeed_i2c_bus_vmstate, AspeedI2CBus), VMSTATE_UINT8_ARRAY(pool, AspeedI2CState, ASPEED_I2C_MAX_POOL_SIZE), VMSTATE_END_OF_LIST() } }; static void aspeed_i2c_reset(DeviceState *dev) { int i; AspeedI2CState *s = ASPEED_I2C(dev); AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); s->intr_status = 0; for (i = 0; i < aic->num_busses; i++) { s->busses[i].intr_ctrl = 0; s->busses[i].intr_status = 0; s->busses[i].cmd = 0; s->busses[i].buf = 0; s->busses[i].dma_addr = 0; s->busses[i].dma_len = 0; i2c_end_transfer(s->busses[i].bus); } } /* * Address Definitions (AST2400 and AST2500) * * 0x000 ... 0x03F: Global Register * 0x040 ... 0x07F: Device 1 * 0x080 ... 0x0BF: Device 2 * 0x0C0 ... 0x0FF: Device 3 * 0x100 ... 0x13F: Device 4 * 0x140 ... 0x17F: Device 5 * 0x180 ... 0x1BF: Device 6 * 0x1C0 ... 0x1FF: Device 7 * 0x200 ... 0x2FF: Buffer Pool (unused in linux driver) * 0x300 ... 0x33F: Device 8 * 0x340 ... 0x37F: Device 9 * 0x380 ... 0x3BF: Device 10 * 0x3C0 ... 0x3FF: Device 11 * 0x400 ... 0x43F: Device 12 * 0x440 ... 0x47F: Device 13 * 0x480 ... 0x4BF: Device 14 * 0x800 ... 0xFFF: Buffer Pool (unused in linux driver) */ static void aspeed_i2c_realize(DeviceState *dev, Error **errp) { int i; SysBusDevice *sbd = SYS_BUS_DEVICE(dev); AspeedI2CState *s = ASPEED_I2C(dev); AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); sysbus_init_irq(sbd, &s->irq); memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_i2c_ctrl_ops, s, "aspeed.i2c", 0x1000); sysbus_init_mmio(sbd, &s->iomem); for (i = 0; i < aic->num_busses; i++) { char name[32]; int offset = i < aic->gap ? 1 : 5; sysbus_init_irq(sbd, &s->busses[i].irq); snprintf(name, sizeof(name), "aspeed.i2c.%d", i); s->busses[i].controller = s; s->busses[i].id = i; s->busses[i].bus = i2c_init_bus(dev, name); memory_region_init_io(&s->busses[i].mr, OBJECT(dev), &aspeed_i2c_bus_ops, &s->busses[i], name, aic->reg_size); memory_region_add_subregion(&s->iomem, aic->reg_size * (i + offset), &s->busses[i].mr); } memory_region_init_io(&s->pool_iomem, OBJECT(s), &aspeed_i2c_pool_ops, s, "aspeed.i2c-pool", aic->pool_size); memory_region_add_subregion(&s->iomem, aic->pool_base, &s->pool_iomem); if (aic->has_dma) { if (!s->dram_mr) { error_setg(errp, TYPE_ASPEED_I2C ": 'dram' link not set"); return; } address_space_init(&s->dram_as, s->dram_mr, "dma-dram"); } } static Property aspeed_i2c_properties[] = { DEFINE_PROP_LINK("dram", AspeedI2CState, dram_mr, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_END_OF_LIST(), }; static void aspeed_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); dc->vmsd = &aspeed_i2c_vmstate; dc->reset = aspeed_i2c_reset; device_class_set_props(dc, aspeed_i2c_properties); dc->realize = aspeed_i2c_realize; dc->desc = "Aspeed I2C Controller"; } static const TypeInfo aspeed_i2c_info = { .name = TYPE_ASPEED_I2C, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(AspeedI2CState), .class_init = aspeed_i2c_class_init, .class_size = sizeof(AspeedI2CClass), .abstract = true, }; static qemu_irq aspeed_2400_i2c_bus_get_irq(AspeedI2CBus *bus) { return bus->controller->irq; } static uint8_t *aspeed_2400_i2c_bus_pool_base(AspeedI2CBus *bus) { uint8_t *pool_page = &bus->controller->pool[I2CD_POOL_PAGE_SEL(bus->ctrl) * 0x100]; return &pool_page[I2CD_POOL_OFFSET(bus->pool_ctrl)]; } static void aspeed_2400_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass); dc->desc = "ASPEED 2400 I2C Controller"; aic->num_busses = 14; aic->reg_size = 0x40; aic->gap = 7; aic->bus_get_irq = aspeed_2400_i2c_bus_get_irq; aic->pool_size = 0x800; aic->pool_base = 0x800; aic->bus_pool_base = aspeed_2400_i2c_bus_pool_base; } static const TypeInfo aspeed_2400_i2c_info = { .name = TYPE_ASPEED_2400_I2C, .parent = TYPE_ASPEED_I2C, .class_init = aspeed_2400_i2c_class_init, }; static qemu_irq aspeed_2500_i2c_bus_get_irq(AspeedI2CBus *bus) { return bus->controller->irq; } static uint8_t *aspeed_2500_i2c_bus_pool_base(AspeedI2CBus *bus) { return &bus->controller->pool[bus->id * 0x10]; } static void aspeed_2500_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass); dc->desc = "ASPEED 2500 I2C Controller"; aic->num_busses = 14; aic->reg_size = 0x40; aic->gap = 7; aic->bus_get_irq = aspeed_2500_i2c_bus_get_irq; aic->pool_size = 0x100; aic->pool_base = 0x200; aic->bus_pool_base = aspeed_2500_i2c_bus_pool_base; aic->check_sram = true; aic->has_dma = true; } static const TypeInfo aspeed_2500_i2c_info = { .name = TYPE_ASPEED_2500_I2C, .parent = TYPE_ASPEED_I2C, .class_init = aspeed_2500_i2c_class_init, }; static qemu_irq aspeed_2600_i2c_bus_get_irq(AspeedI2CBus *bus) { return bus->irq; } static uint8_t *aspeed_2600_i2c_bus_pool_base(AspeedI2CBus *bus) { return &bus->controller->pool[bus->id * 0x20]; } static void aspeed_2600_i2c_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); AspeedI2CClass *aic = ASPEED_I2C_CLASS(klass); dc->desc = "ASPEED 2600 I2C Controller"; aic->num_busses = 16; aic->reg_size = 0x80; aic->gap = -1; /* no gap */ aic->bus_get_irq = aspeed_2600_i2c_bus_get_irq; aic->pool_size = 0x200; aic->pool_base = 0xC00; aic->bus_pool_base = aspeed_2600_i2c_bus_pool_base; aic->has_dma = true; } static const TypeInfo aspeed_2600_i2c_info = { .name = TYPE_ASPEED_2600_I2C, .parent = TYPE_ASPEED_I2C, .class_init = aspeed_2600_i2c_class_init, }; static void aspeed_i2c_register_types(void) { type_register_static(&aspeed_i2c_info); type_register_static(&aspeed_2400_i2c_info); type_register_static(&aspeed_2500_i2c_info); type_register_static(&aspeed_2600_i2c_info); } type_init(aspeed_i2c_register_types) I2CBus *aspeed_i2c_get_bus(AspeedI2CState *s, int busnr) { AspeedI2CClass *aic = ASPEED_I2C_GET_CLASS(s); I2CBus *bus = NULL; if (busnr >= 0 && busnr < aic->num_busses) { bus = s->busses[busnr].bus; } return bus; }