/* * QEMU USB EHCI Emulation * * Copyright(c) 2008 Emutex Ltd. (address@hidden) * Copyright(c) 2011-2012 Red Hat, Inc. * * Red Hat Authors: * Gerd Hoffmann * Hans de Goede * * EHCI project was started by Mark Burkley, with contributions by * Niels de Vos. David S. Ahern continued working on it. Kevin Wolf, * Jan Kiszka and Vincent Palatin contributed bugfixes. * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or(at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . */ #include "hw/usb/hcd-ehci.h" /* Capability Registers Base Address - section 2.2 */ #define CAPLENGTH 0x0000 /* 1-byte, 0x0001 reserved */ #define HCIVERSION 0x0002 /* 2-bytes, i/f version # */ #define HCSPARAMS 0x0004 /* 4-bytes, structural params */ #define HCCPARAMS 0x0008 /* 4-bytes, capability params */ #define EECP HCCPARAMS + 1 #define HCSPPORTROUTE1 0x000c #define HCSPPORTROUTE2 0x0010 #define USBCMD 0x0000 #define USBCMD_RUNSTOP (1 << 0) // run / Stop #define USBCMD_HCRESET (1 << 1) // HC Reset #define USBCMD_FLS (3 << 2) // Frame List Size #define USBCMD_FLS_SH 2 // Frame List Size Shift #define USBCMD_PSE (1 << 4) // Periodic Schedule Enable #define USBCMD_ASE (1 << 5) // Asynch Schedule Enable #define USBCMD_IAAD (1 << 6) // Int Asynch Advance Doorbell #define USBCMD_LHCR (1 << 7) // Light Host Controller Reset #define USBCMD_ASPMC (3 << 8) // Async Sched Park Mode Count #define USBCMD_ASPME (1 << 11) // Async Sched Park Mode Enable #define USBCMD_ITC (0x7f << 16) // Int Threshold Control #define USBCMD_ITC_SH 16 // Int Threshold Control Shift #define USBSTS 0x0004 #define USBSTS_RO_MASK 0x0000003f #define USBSTS_INT (1 << 0) // USB Interrupt #define USBSTS_ERRINT (1 << 1) // Error Interrupt #define USBSTS_PCD (1 << 2) // Port Change Detect #define USBSTS_FLR (1 << 3) // Frame List Rollover #define USBSTS_HSE (1 << 4) // Host System Error #define USBSTS_IAA (1 << 5) // Interrupt on Async Advance #define USBSTS_HALT (1 << 12) // HC Halted #define USBSTS_REC (1 << 13) // Reclamation #define USBSTS_PSS (1 << 14) // Periodic Schedule Status #define USBSTS_ASS (1 << 15) // Asynchronous Schedule Status /* * Interrupt enable bits correspond to the interrupt active bits in USBSTS * so no need to redefine here. */ #define USBINTR 0x0008 #define USBINTR_MASK 0x0000003f #define FRINDEX 0x000c #define CTRLDSSEGMENT 0x0010 #define PERIODICLISTBASE 0x0014 #define ASYNCLISTADDR 0x0018 #define ASYNCLISTADDR_MASK 0xffffffe0 #define CONFIGFLAG 0x0040 /* * Bits that are reserved or are read-only are masked out of values * written to us by software */ #define PORTSC_RO_MASK 0x007001c0 #define PORTSC_RWC_MASK 0x0000002a #define PORTSC_WKOC_E (1 << 22) // Wake on Over Current Enable #define PORTSC_WKDS_E (1 << 21) // Wake on Disconnect Enable #define PORTSC_WKCN_E (1 << 20) // Wake on Connect Enable #define PORTSC_PTC (15 << 16) // Port Test Control #define PORTSC_PTC_SH 16 // Port Test Control shift #define PORTSC_PIC (3 << 14) // Port Indicator Control #define PORTSC_PIC_SH 14 // Port Indicator Control Shift #define PORTSC_POWNER (1 << 13) // Port Owner #define PORTSC_PPOWER (1 << 12) // Port Power #define PORTSC_LINESTAT (3 << 10) // Port Line Status #define PORTSC_LINESTAT_SH 10 // Port Line Status Shift #define PORTSC_PRESET (1 << 8) // Port Reset #define PORTSC_SUSPEND (1 << 7) // Port Suspend #define PORTSC_FPRES (1 << 6) // Force Port Resume #define PORTSC_OCC (1 << 5) // Over Current Change #define PORTSC_OCA (1 << 4) // Over Current Active #define PORTSC_PEDC (1 << 3) // Port Enable/Disable Change #define PORTSC_PED (1 << 2) // Port Enable/Disable #define PORTSC_CSC (1 << 1) // Connect Status Change #define PORTSC_CONNECT (1 << 0) // Current Connect Status #define FRAME_TIMER_FREQ 1000 #define FRAME_TIMER_NS (1000000000 / FRAME_TIMER_FREQ) #define UFRAME_TIMER_NS (FRAME_TIMER_NS / 8) #define NB_MAXINTRATE 8 // Max rate at which controller issues ints #define BUFF_SIZE 5*4096 // Max bytes to transfer per transaction #define MAX_QH 100 // Max allowable queue heads in a chain #define MIN_UFR_PER_TICK 24 /* Min frames to process when catching up */ #define PERIODIC_ACTIVE 512 /* Micro-frames */ /* Internal periodic / asynchronous schedule state machine states */ typedef enum { EST_INACTIVE = 1000, EST_ACTIVE, EST_EXECUTING, EST_SLEEPING, /* The following states are internal to the state machine function */ EST_WAITLISTHEAD, EST_FETCHENTRY, EST_FETCHQH, EST_FETCHITD, EST_FETCHSITD, EST_ADVANCEQUEUE, EST_FETCHQTD, EST_EXECUTE, EST_WRITEBACK, EST_HORIZONTALQH } EHCI_STATES; /* macros for accessing fields within next link pointer entry */ #define NLPTR_GET(x) ((x) & 0xffffffe0) #define NLPTR_TYPE_GET(x) (((x) >> 1) & 3) #define NLPTR_TBIT(x) ((x) & 1) // 1=invalid, 0=valid /* link pointer types */ #define NLPTR_TYPE_ITD 0 // isoc xfer descriptor #define NLPTR_TYPE_QH 1 // queue head #define NLPTR_TYPE_STITD 2 // split xaction, isoc xfer descriptor #define NLPTR_TYPE_FSTN 3 // frame span traversal node #define SET_LAST_RUN_CLOCK(s) \ (s)->last_run_ns = qemu_get_clock_ns(vm_clock); /* nifty macros from Arnon's EHCI version */ #define get_field(data, field) \ (((data) & field##_MASK) >> field##_SH) #define set_field(data, newval, field) do { \ uint32_t val = *data; \ val &= ~ field##_MASK; \ val |= ((newval) << field##_SH) & field##_MASK; \ *data = val; \ } while(0) static const char *ehci_state_names[] = { [EST_INACTIVE] = "INACTIVE", [EST_ACTIVE] = "ACTIVE", [EST_EXECUTING] = "EXECUTING", [EST_SLEEPING] = "SLEEPING", [EST_WAITLISTHEAD] = "WAITLISTHEAD", [EST_FETCHENTRY] = "FETCH ENTRY", [EST_FETCHQH] = "FETCH QH", [EST_FETCHITD] = "FETCH ITD", [EST_ADVANCEQUEUE] = "ADVANCEQUEUE", [EST_FETCHQTD] = "FETCH QTD", [EST_EXECUTE] = "EXECUTE", [EST_WRITEBACK] = "WRITEBACK", [EST_HORIZONTALQH] = "HORIZONTALQH", }; static const char *ehci_mmio_names[] = { [USBCMD] = "USBCMD", [USBSTS] = "USBSTS", [USBINTR] = "USBINTR", [FRINDEX] = "FRINDEX", [PERIODICLISTBASE] = "P-LIST BASE", [ASYNCLISTADDR] = "A-LIST ADDR", [CONFIGFLAG] = "CONFIGFLAG", }; static int ehci_state_executing(EHCIQueue *q); static int ehci_state_writeback(EHCIQueue *q); static int ehci_state_advqueue(EHCIQueue *q); static int ehci_fill_queue(EHCIPacket *p); static void ehci_free_packet(EHCIPacket *p); static const char *nr2str(const char **n, size_t len, uint32_t nr) { if (nr < len && n[nr] != NULL) { return n[nr]; } else { return "unknown"; } } static const char *state2str(uint32_t state) { return nr2str(ehci_state_names, ARRAY_SIZE(ehci_state_names), state); } static const char *addr2str(hwaddr addr) { return nr2str(ehci_mmio_names, ARRAY_SIZE(ehci_mmio_names), addr); } static void ehci_trace_usbsts(uint32_t mask, int state) { /* interrupts */ if (mask & USBSTS_INT) { trace_usb_ehci_usbsts("INT", state); } if (mask & USBSTS_ERRINT) { trace_usb_ehci_usbsts("ERRINT", state); } if (mask & USBSTS_PCD) { trace_usb_ehci_usbsts("PCD", state); } if (mask & USBSTS_FLR) { trace_usb_ehci_usbsts("FLR", state); } if (mask & USBSTS_HSE) { trace_usb_ehci_usbsts("HSE", state); } if (mask & USBSTS_IAA) { trace_usb_ehci_usbsts("IAA", state); } /* status */ if (mask & USBSTS_HALT) { trace_usb_ehci_usbsts("HALT", state); } if (mask & USBSTS_REC) { trace_usb_ehci_usbsts("REC", state); } if (mask & USBSTS_PSS) { trace_usb_ehci_usbsts("PSS", state); } if (mask & USBSTS_ASS) { trace_usb_ehci_usbsts("ASS", state); } } static inline void ehci_set_usbsts(EHCIState *s, int mask) { if ((s->usbsts & mask) == mask) { return; } ehci_trace_usbsts(mask, 1); s->usbsts |= mask; } static inline void ehci_clear_usbsts(EHCIState *s, int mask) { if ((s->usbsts & mask) == 0) { return; } ehci_trace_usbsts(mask, 0); s->usbsts &= ~mask; } /* update irq line */ static inline void ehci_update_irq(EHCIState *s) { int level = 0; if ((s->usbsts & USBINTR_MASK) & s->usbintr) { level = 1; } trace_usb_ehci_irq(level, s->frindex, s->usbsts, s->usbintr); qemu_set_irq(s->irq, level); } /* flag interrupt condition */ static inline void ehci_raise_irq(EHCIState *s, int intr) { if (intr & (USBSTS_PCD | USBSTS_FLR | USBSTS_HSE)) { s->usbsts |= intr; ehci_update_irq(s); } else { s->usbsts_pending |= intr; } } /* * Commit pending interrupts (added via ehci_raise_irq), * at the rate allowed by "Interrupt Threshold Control". */ static inline void ehci_commit_irq(EHCIState *s) { uint32_t itc; if (!s->usbsts_pending) { return; } if (s->usbsts_frindex > s->frindex) { return; } itc = (s->usbcmd >> 16) & 0xff; s->usbsts |= s->usbsts_pending; s->usbsts_pending = 0; s->usbsts_frindex = s->frindex + itc; ehci_update_irq(s); } static void ehci_update_halt(EHCIState *s) { if (s->usbcmd & USBCMD_RUNSTOP) { ehci_clear_usbsts(s, USBSTS_HALT); } else { if (s->astate == EST_INACTIVE && s->pstate == EST_INACTIVE) { ehci_set_usbsts(s, USBSTS_HALT); } } } static void ehci_set_state(EHCIState *s, int async, int state) { if (async) { trace_usb_ehci_state("async", state2str(state)); s->astate = state; if (s->astate == EST_INACTIVE) { ehci_clear_usbsts(s, USBSTS_ASS); ehci_update_halt(s); } else { ehci_set_usbsts(s, USBSTS_ASS); } } else { trace_usb_ehci_state("periodic", state2str(state)); s->pstate = state; if (s->pstate == EST_INACTIVE) { ehci_clear_usbsts(s, USBSTS_PSS); ehci_update_halt(s); } else { ehci_set_usbsts(s, USBSTS_PSS); } } } static int ehci_get_state(EHCIState *s, int async) { return async ? s->astate : s->pstate; } static void ehci_set_fetch_addr(EHCIState *s, int async, uint32_t addr) { if (async) { s->a_fetch_addr = addr; } else { s->p_fetch_addr = addr; } } static int ehci_get_fetch_addr(EHCIState *s, int async) { return async ? s->a_fetch_addr : s->p_fetch_addr; } static void ehci_trace_qh(EHCIQueue *q, hwaddr addr, EHCIqh *qh) { /* need three here due to argument count limits */ trace_usb_ehci_qh_ptrs(q, addr, qh->next, qh->current_qtd, qh->next_qtd, qh->altnext_qtd); trace_usb_ehci_qh_fields(addr, get_field(qh->epchar, QH_EPCHAR_RL), get_field(qh->epchar, QH_EPCHAR_MPLEN), get_field(qh->epchar, QH_EPCHAR_EPS), get_field(qh->epchar, QH_EPCHAR_EP), get_field(qh->epchar, QH_EPCHAR_DEVADDR)); trace_usb_ehci_qh_bits(addr, (bool)(qh->epchar & QH_EPCHAR_C), (bool)(qh->epchar & QH_EPCHAR_H), (bool)(qh->epchar & QH_EPCHAR_DTC), (bool)(qh->epchar & QH_EPCHAR_I)); } static void ehci_trace_qtd(EHCIQueue *q, hwaddr addr, EHCIqtd *qtd) { /* need three here due to argument count limits */ trace_usb_ehci_qtd_ptrs(q, addr, qtd->next, qtd->altnext); trace_usb_ehci_qtd_fields(addr, get_field(qtd->token, QTD_TOKEN_TBYTES), get_field(qtd->token, QTD_TOKEN_CPAGE), get_field(qtd->token, QTD_TOKEN_CERR), get_field(qtd->token, QTD_TOKEN_PID)); trace_usb_ehci_qtd_bits(addr, (bool)(qtd->token & QTD_TOKEN_IOC), (bool)(qtd->token & QTD_TOKEN_ACTIVE), (bool)(qtd->token & QTD_TOKEN_HALT), (bool)(qtd->token & QTD_TOKEN_BABBLE), (bool)(qtd->token & QTD_TOKEN_XACTERR)); } static void ehci_trace_itd(EHCIState *s, hwaddr addr, EHCIitd *itd) { trace_usb_ehci_itd(addr, itd->next, get_field(itd->bufptr[1], ITD_BUFPTR_MAXPKT), get_field(itd->bufptr[2], ITD_BUFPTR_MULT), get_field(itd->bufptr[0], ITD_BUFPTR_EP), get_field(itd->bufptr[0], ITD_BUFPTR_DEVADDR)); } static void ehci_trace_sitd(EHCIState *s, hwaddr addr, EHCIsitd *sitd) { trace_usb_ehci_sitd(addr, sitd->next, (bool)(sitd->results & SITD_RESULTS_ACTIVE)); } static void ehci_trace_guest_bug(EHCIState *s, const char *message) { trace_usb_ehci_guest_bug(message); fprintf(stderr, "ehci warning: %s\n", message); } static inline bool ehci_enabled(EHCIState *s) { return s->usbcmd & USBCMD_RUNSTOP; } static inline bool ehci_async_enabled(EHCIState *s) { return ehci_enabled(s) && (s->usbcmd & USBCMD_ASE); } static inline bool ehci_periodic_enabled(EHCIState *s) { return ehci_enabled(s) && (s->usbcmd & USBCMD_PSE); } /* Get an array of dwords from main memory */ static inline int get_dwords(EHCIState *ehci, uint32_t addr, uint32_t *buf, int num) { int i; if (!ehci->as) { ehci_raise_irq(ehci, USBSTS_HSE); ehci->usbcmd &= ~USBCMD_RUNSTOP; trace_usb_ehci_dma_error(); return -1; } for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { dma_memory_read(ehci->as, addr, buf, sizeof(*buf)); *buf = le32_to_cpu(*buf); } return num; } /* Put an array of dwords in to main memory */ static inline int put_dwords(EHCIState *ehci, uint32_t addr, uint32_t *buf, int num) { int i; if (!ehci->as) { ehci_raise_irq(ehci, USBSTS_HSE); ehci->usbcmd &= ~USBCMD_RUNSTOP; trace_usb_ehci_dma_error(); return -1; } for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { uint32_t tmp = cpu_to_le32(*buf); dma_memory_write(ehci->as, addr, &tmp, sizeof(tmp)); } return num; } static int ehci_get_pid(EHCIqtd *qtd) { switch (get_field(qtd->token, QTD_TOKEN_PID)) { case 0: return USB_TOKEN_OUT; case 1: return USB_TOKEN_IN; case 2: return USB_TOKEN_SETUP; default: fprintf(stderr, "bad token\n"); return 0; } } static bool ehci_verify_qh(EHCIQueue *q, EHCIqh *qh) { uint32_t devaddr = get_field(qh->epchar, QH_EPCHAR_DEVADDR); uint32_t endp = get_field(qh->epchar, QH_EPCHAR_EP); if ((devaddr != get_field(q->qh.epchar, QH_EPCHAR_DEVADDR)) || (endp != get_field(q->qh.epchar, QH_EPCHAR_EP)) || (qh->current_qtd != q->qh.current_qtd) || (q->async && qh->next_qtd != q->qh.next_qtd) || (memcmp(&qh->altnext_qtd, &q->qh.altnext_qtd, 7 * sizeof(uint32_t)) != 0) || (q->dev != NULL && q->dev->addr != devaddr)) { return false; } else { return true; } } static bool ehci_verify_qtd(EHCIPacket *p, EHCIqtd *qtd) { if (p->qtdaddr != p->queue->qtdaddr || (p->queue->async && !NLPTR_TBIT(p->qtd.next) && (p->qtd.next != qtd->next)) || (!NLPTR_TBIT(p->qtd.altnext) && (p->qtd.altnext != qtd->altnext)) || p->qtd.token != qtd->token || p->qtd.bufptr[0] != qtd->bufptr[0]) { return false; } else { return true; } } static bool ehci_verify_pid(EHCIQueue *q, EHCIqtd *qtd) { int ep = get_field(q->qh.epchar, QH_EPCHAR_EP); int pid = ehci_get_pid(qtd); /* Note the pid changing is normal for ep 0 (the control ep) */ if (q->last_pid && ep != 0 && pid != q->last_pid) { return false; } else { return true; } } /* Finish executing and writeback a packet outside of the regular fetchqh -> fetchqtd -> execute -> writeback cycle */ static void ehci_writeback_async_complete_packet(EHCIPacket *p) { EHCIQueue *q = p->queue; EHCIqtd qtd; EHCIqh qh; int state; /* Verify the qh + qtd, like we do when going through fetchqh & fetchqtd */ get_dwords(q->ehci, NLPTR_GET(q->qhaddr), (uint32_t *) &qh, sizeof(EHCIqh) >> 2); get_dwords(q->ehci, NLPTR_GET(q->qtdaddr), (uint32_t *) &qtd, sizeof(EHCIqtd) >> 2); if (!ehci_verify_qh(q, &qh) || !ehci_verify_qtd(p, &qtd)) { p->async = EHCI_ASYNC_INITIALIZED; ehci_free_packet(p); return; } state = ehci_get_state(q->ehci, q->async); ehci_state_executing(q); ehci_state_writeback(q); /* Frees the packet! */ if (!(q->qh.token & QTD_TOKEN_HALT)) { ehci_state_advqueue(q); } ehci_set_state(q->ehci, q->async, state); } /* packet management */ static EHCIPacket *ehci_alloc_packet(EHCIQueue *q) { EHCIPacket *p; p = g_new0(EHCIPacket, 1); p->queue = q; usb_packet_init(&p->packet); QTAILQ_INSERT_TAIL(&q->packets, p, next); trace_usb_ehci_packet_action(p->queue, p, "alloc"); return p; } static void ehci_free_packet(EHCIPacket *p) { if (p->async == EHCI_ASYNC_FINISHED && !(p->queue->qh.token & QTD_TOKEN_HALT)) { ehci_writeback_async_complete_packet(p); return; } trace_usb_ehci_packet_action(p->queue, p, "free"); if (p->async == EHCI_ASYNC_INFLIGHT) { usb_cancel_packet(&p->packet); } if (p->async == EHCI_ASYNC_FINISHED && p->packet.status == USB_RET_SUCCESS) { fprintf(stderr, "EHCI: Dropping completed packet from halted %s ep %02X\n", (p->pid == USB_TOKEN_IN) ? "in" : "out", get_field(p->queue->qh.epchar, QH_EPCHAR_EP)); } if (p->async != EHCI_ASYNC_NONE) { usb_packet_unmap(&p->packet, &p->sgl); qemu_sglist_destroy(&p->sgl); } QTAILQ_REMOVE(&p->queue->packets, p, next); usb_packet_cleanup(&p->packet); g_free(p); } /* queue management */ static EHCIQueue *ehci_alloc_queue(EHCIState *ehci, uint32_t addr, int async) { EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; EHCIQueue *q; q = g_malloc0(sizeof(*q)); q->ehci = ehci; q->qhaddr = addr; q->async = async; QTAILQ_INIT(&q->packets); QTAILQ_INSERT_HEAD(head, q, next); trace_usb_ehci_queue_action(q, "alloc"); return q; } static void ehci_queue_stopped(EHCIQueue *q) { int endp = get_field(q->qh.epchar, QH_EPCHAR_EP); if (!q->last_pid || !q->dev) { return; } usb_device_ep_stopped(q->dev, usb_ep_get(q->dev, q->last_pid, endp)); } static int ehci_cancel_queue(EHCIQueue *q) { EHCIPacket *p; int packets = 0; p = QTAILQ_FIRST(&q->packets); if (p == NULL) { goto leave; } trace_usb_ehci_queue_action(q, "cancel"); do { ehci_free_packet(p); packets++; } while ((p = QTAILQ_FIRST(&q->packets)) != NULL); leave: ehci_queue_stopped(q); return packets; } static int ehci_reset_queue(EHCIQueue *q) { int packets; trace_usb_ehci_queue_action(q, "reset"); packets = ehci_cancel_queue(q); q->dev = NULL; q->qtdaddr = 0; q->last_pid = 0; return packets; } static void ehci_free_queue(EHCIQueue *q, const char *warn) { EHCIQueueHead *head = q->async ? &q->ehci->aqueues : &q->ehci->pqueues; int cancelled; trace_usb_ehci_queue_action(q, "free"); cancelled = ehci_cancel_queue(q); if (warn && cancelled > 0) { ehci_trace_guest_bug(q->ehci, warn); } QTAILQ_REMOVE(head, q, next); g_free(q); } static EHCIQueue *ehci_find_queue_by_qh(EHCIState *ehci, uint32_t addr, int async) { EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; EHCIQueue *q; QTAILQ_FOREACH(q, head, next) { if (addr == q->qhaddr) { return q; } } return NULL; } static void ehci_queues_rip_unused(EHCIState *ehci, int async) { EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; const char *warn = async ? "guest unlinked busy QH" : NULL; uint64_t maxage = FRAME_TIMER_NS * ehci->maxframes * 4; EHCIQueue *q, *tmp; QTAILQ_FOREACH_SAFE(q, head, next, tmp) { if (q->seen) { q->seen = 0; q->ts = ehci->last_run_ns; continue; } if (ehci->last_run_ns < q->ts + maxage) { continue; } ehci_free_queue(q, warn); } } static void ehci_queues_rip_unseen(EHCIState *ehci, int async) { EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; EHCIQueue *q, *tmp; QTAILQ_FOREACH_SAFE(q, head, next, tmp) { if (!q->seen) { ehci_free_queue(q, NULL); } } } static void ehci_queues_rip_device(EHCIState *ehci, USBDevice *dev, int async) { EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; EHCIQueue *q, *tmp; QTAILQ_FOREACH_SAFE(q, head, next, tmp) { if (q->dev != dev) { continue; } ehci_free_queue(q, NULL); } } static void ehci_queues_rip_all(EHCIState *ehci, int async) { EHCIQueueHead *head = async ? &ehci->aqueues : &ehci->pqueues; const char *warn = async ? "guest stopped busy async schedule" : NULL; EHCIQueue *q, *tmp; QTAILQ_FOREACH_SAFE(q, head, next, tmp) { ehci_free_queue(q, warn); } } /* Attach or detach a device on root hub */ static void ehci_attach(USBPort *port) { EHCIState *s = port->opaque; uint32_t *portsc = &s->portsc[port->index]; const char *owner = (*portsc & PORTSC_POWNER) ? "comp" : "ehci"; trace_usb_ehci_port_attach(port->index, owner, port->dev->product_desc); if (*portsc & PORTSC_POWNER) { USBPort *companion = s->companion_ports[port->index]; companion->dev = port->dev; companion->ops->attach(companion); return; } *portsc |= PORTSC_CONNECT; *portsc |= PORTSC_CSC; ehci_raise_irq(s, USBSTS_PCD); } static void ehci_detach(USBPort *port) { EHCIState *s = port->opaque; uint32_t *portsc = &s->portsc[port->index]; const char *owner = (*portsc & PORTSC_POWNER) ? "comp" : "ehci"; trace_usb_ehci_port_detach(port->index, owner); if (*portsc & PORTSC_POWNER) { USBPort *companion = s->companion_ports[port->index]; companion->ops->detach(companion); companion->dev = NULL; /* * EHCI spec 4.2.2: "When a disconnect occurs... On the event, * the port ownership is returned immediately to the EHCI controller." */ *portsc &= ~PORTSC_POWNER; return; } ehci_queues_rip_device(s, port->dev, 0); ehci_queues_rip_device(s, port->dev, 1); *portsc &= ~(PORTSC_CONNECT|PORTSC_PED); *portsc |= PORTSC_CSC; ehci_raise_irq(s, USBSTS_PCD); } static void ehci_child_detach(USBPort *port, USBDevice *child) { EHCIState *s = port->opaque; uint32_t portsc = s->portsc[port->index]; if (portsc & PORTSC_POWNER) { USBPort *companion = s->companion_ports[port->index]; companion->ops->child_detach(companion, child); return; } ehci_queues_rip_device(s, child, 0); ehci_queues_rip_device(s, child, 1); } static void ehci_wakeup(USBPort *port) { EHCIState *s = port->opaque; uint32_t portsc = s->portsc[port->index]; if (portsc & PORTSC_POWNER) { USBPort *companion = s->companion_ports[port->index]; if (companion->ops->wakeup) { companion->ops->wakeup(companion); } return; } qemu_bh_schedule(s->async_bh); } static int ehci_register_companion(USBBus *bus, USBPort *ports[], uint32_t portcount, uint32_t firstport) { EHCIState *s = container_of(bus, EHCIState, bus); uint32_t i; if (firstport + portcount > NB_PORTS) { qerror_report(QERR_INVALID_PARAMETER_VALUE, "firstport", "firstport on masterbus"); error_printf_unless_qmp( "firstport value of %u makes companion take ports %u - %u, which " "is outside of the valid range of 0 - %u\n", firstport, firstport, firstport + portcount - 1, NB_PORTS - 1); return -1; } for (i = 0; i < portcount; i++) { if (s->companion_ports[firstport + i]) { qerror_report(QERR_INVALID_PARAMETER_VALUE, "masterbus", "an USB masterbus"); error_printf_unless_qmp( "port %u on masterbus %s already has a companion assigned\n", firstport + i, bus->qbus.name); return -1; } } for (i = 0; i < portcount; i++) { s->companion_ports[firstport + i] = ports[i]; s->ports[firstport + i].speedmask |= USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL; /* Ensure devs attached before the initial reset go to the companion */ s->portsc[firstport + i] = PORTSC_POWNER; } s->companion_count++; s->caps[0x05] = (s->companion_count << 4) | portcount; return 0; } static void ehci_wakeup_endpoint(USBBus *bus, USBEndpoint *ep, unsigned int stream) { EHCIState *s = container_of(bus, EHCIState, bus); uint32_t portsc = s->portsc[ep->dev->port->index]; if (portsc & PORTSC_POWNER) { return; } s->periodic_sched_active = PERIODIC_ACTIVE; qemu_bh_schedule(s->async_bh); } static USBDevice *ehci_find_device(EHCIState *ehci, uint8_t addr) { USBDevice *dev; USBPort *port; int i; for (i = 0; i < NB_PORTS; i++) { port = &ehci->ports[i]; if (!(ehci->portsc[i] & PORTSC_PED)) { DPRINTF("Port %d not enabled\n", i); continue; } dev = usb_find_device(port, addr); if (dev != NULL) { return dev; } } return NULL; } /* 4.1 host controller initialization */ static void ehci_reset(void *opaque) { EHCIState *s = opaque; int i; USBDevice *devs[NB_PORTS]; trace_usb_ehci_reset(); /* * Do the detach before touching portsc, so that it correctly gets send to * us or to our companion based on PORTSC_POWNER before the reset. */ for(i = 0; i < NB_PORTS; i++) { devs[i] = s->ports[i].dev; if (devs[i] && devs[i]->attached) { usb_detach(&s->ports[i]); } } memset(&s->opreg, 0x00, sizeof(s->opreg)); memset(&s->portsc, 0x00, sizeof(s->portsc)); s->usbcmd = NB_MAXINTRATE << USBCMD_ITC_SH; s->usbsts = USBSTS_HALT; s->usbsts_pending = 0; s->usbsts_frindex = 0; s->astate = EST_INACTIVE; s->pstate = EST_INACTIVE; for(i = 0; i < NB_PORTS; i++) { if (s->companion_ports[i]) { s->portsc[i] = PORTSC_POWNER | PORTSC_PPOWER; } else { s->portsc[i] = PORTSC_PPOWER; } if (devs[i] && devs[i]->attached) { usb_attach(&s->ports[i]); usb_device_reset(devs[i]); } } ehci_queues_rip_all(s, 0); ehci_queues_rip_all(s, 1); qemu_del_timer(s->frame_timer); qemu_bh_cancel(s->async_bh); } static uint64_t ehci_caps_read(void *ptr, hwaddr addr, unsigned size) { EHCIState *s = ptr; return s->caps[addr]; } static uint64_t ehci_opreg_read(void *ptr, hwaddr addr, unsigned size) { EHCIState *s = ptr; uint32_t val; switch (addr) { case FRINDEX: /* Round down to mult of 8, else it can go backwards on migration */ val = s->frindex & ~7; break; default: val = s->opreg[addr >> 2]; } trace_usb_ehci_opreg_read(addr + s->opregbase, addr2str(addr), val); return val; } static uint64_t ehci_port_read(void *ptr, hwaddr addr, unsigned size) { EHCIState *s = ptr; uint32_t val; val = s->portsc[addr >> 2]; trace_usb_ehci_portsc_read(addr + s->portscbase, addr >> 2, val); return val; } static void handle_port_owner_write(EHCIState *s, int port, uint32_t owner) { USBDevice *dev = s->ports[port].dev; uint32_t *portsc = &s->portsc[port]; uint32_t orig; if (s->companion_ports[port] == NULL) return; owner = owner & PORTSC_POWNER; orig = *portsc & PORTSC_POWNER; if (!(owner ^ orig)) { return; } if (dev && dev->attached) { usb_detach(&s->ports[port]); } *portsc &= ~PORTSC_POWNER; *portsc |= owner; if (dev && dev->attached) { usb_attach(&s->ports[port]); } } static void ehci_port_write(void *ptr, hwaddr addr, uint64_t val, unsigned size) { EHCIState *s = ptr; int port = addr >> 2; uint32_t *portsc = &s->portsc[port]; uint32_t old = *portsc; USBDevice *dev = s->ports[port].dev; trace_usb_ehci_portsc_write(addr + s->portscbase, addr >> 2, val); /* Clear rwc bits */ *portsc &= ~(val & PORTSC_RWC_MASK); /* The guest may clear, but not set the PED bit */ *portsc &= val | ~PORTSC_PED; /* POWNER is masked out by RO_MASK as it is RO when we've no companion */ handle_port_owner_write(s, port, val); /* And finally apply RO_MASK */ val &= PORTSC_RO_MASK; if ((val & PORTSC_PRESET) && !(*portsc & PORTSC_PRESET)) { trace_usb_ehci_port_reset(port, 1); } if (!(val & PORTSC_PRESET) &&(*portsc & PORTSC_PRESET)) { trace_usb_ehci_port_reset(port, 0); if (dev && dev->attached) { usb_port_reset(&s->ports[port]); *portsc &= ~PORTSC_CSC; } /* * Table 2.16 Set the enable bit(and enable bit change) to indicate * to SW that this port has a high speed device attached */ if (dev && dev->attached && (dev->speedmask & USB_SPEED_MASK_HIGH)) { val |= PORTSC_PED; } } *portsc &= ~PORTSC_RO_MASK; *portsc |= val; trace_usb_ehci_portsc_change(addr + s->portscbase, addr >> 2, *portsc, old); } static void ehci_opreg_write(void *ptr, hwaddr addr, uint64_t val, unsigned size) { EHCIState *s = ptr; uint32_t *mmio = s->opreg + (addr >> 2); uint32_t old = *mmio; int i; trace_usb_ehci_opreg_write(addr + s->opregbase, addr2str(addr), val); switch (addr) { case USBCMD: if (val & USBCMD_HCRESET) { ehci_reset(s); val = s->usbcmd; break; } /* not supporting dynamic frame list size at the moment */ if ((val & USBCMD_FLS) && !(s->usbcmd & USBCMD_FLS)) { fprintf(stderr, "attempt to set frame list size -- value %d\n", (int)val & USBCMD_FLS); val &= ~USBCMD_FLS; } if (val & USBCMD_IAAD) { /* * Process IAAD immediately, otherwise the Linux IAAD watchdog may * trigger and re-use a qh without us seeing the unlink. */ s->async_stepdown = 0; qemu_bh_schedule(s->async_bh); trace_usb_ehci_doorbell_ring(); } if (((USBCMD_RUNSTOP | USBCMD_PSE | USBCMD_ASE) & val) != ((USBCMD_RUNSTOP | USBCMD_PSE | USBCMD_ASE) & s->usbcmd)) { if (s->pstate == EST_INACTIVE) { SET_LAST_RUN_CLOCK(s); } s->usbcmd = val; /* Set usbcmd for ehci_update_halt() */ ehci_update_halt(s); s->async_stepdown = 0; qemu_bh_schedule(s->async_bh); } break; case USBSTS: val &= USBSTS_RO_MASK; // bits 6 through 31 are RO ehci_clear_usbsts(s, val); // bits 0 through 5 are R/WC val = s->usbsts; ehci_update_irq(s); break; case USBINTR: val &= USBINTR_MASK; if (ehci_enabled(s) && (USBSTS_FLR & val)) { qemu_bh_schedule(s->async_bh); } break; case FRINDEX: val &= 0x00003fff; /* frindex is 14bits */ s->usbsts_frindex = val; break; case CONFIGFLAG: val &= 0x1; if (val) { for(i = 0; i < NB_PORTS; i++) handle_port_owner_write(s, i, 0); } break; case PERIODICLISTBASE: if (ehci_periodic_enabled(s)) { fprintf(stderr, "ehci: PERIODIC list base register set while periodic schedule\n" " is enabled and HC is enabled\n"); } break; case ASYNCLISTADDR: if (ehci_async_enabled(s)) { fprintf(stderr, "ehci: ASYNC list address register set while async schedule\n" " is enabled and HC is enabled\n"); } break; } *mmio = val; trace_usb_ehci_opreg_change(addr + s->opregbase, addr2str(addr), *mmio, old); } /* * Write the qh back to guest physical memory. This step isn't * in the EHCI spec but we need to do it since we don't share * physical memory with our guest VM. * * The first three dwords are read-only for the EHCI, so skip them * when writing back the qh. */ static void ehci_flush_qh(EHCIQueue *q) { uint32_t *qh = (uint32_t *) &q->qh; uint32_t dwords = sizeof(EHCIqh) >> 2; uint32_t addr = NLPTR_GET(q->qhaddr); put_dwords(q->ehci, addr + 3 * sizeof(uint32_t), qh + 3, dwords - 3); } // 4.10.2 static int ehci_qh_do_overlay(EHCIQueue *q) { EHCIPacket *p = QTAILQ_FIRST(&q->packets); int i; int dtoggle; int ping; int eps; int reload; assert(p != NULL); assert(p->qtdaddr == q->qtdaddr); // remember values in fields to preserve in qh after overlay dtoggle = q->qh.token & QTD_TOKEN_DTOGGLE; ping = q->qh.token & QTD_TOKEN_PING; q->qh.current_qtd = p->qtdaddr; q->qh.next_qtd = p->qtd.next; q->qh.altnext_qtd = p->qtd.altnext; q->qh.token = p->qtd.token; eps = get_field(q->qh.epchar, QH_EPCHAR_EPS); if (eps == EHCI_QH_EPS_HIGH) { q->qh.token &= ~QTD_TOKEN_PING; q->qh.token |= ping; } reload = get_field(q->qh.epchar, QH_EPCHAR_RL); set_field(&q->qh.altnext_qtd, reload, QH_ALTNEXT_NAKCNT); for (i = 0; i < 5; i++) { q->qh.bufptr[i] = p->qtd.bufptr[i]; } if (!(q->qh.epchar & QH_EPCHAR_DTC)) { // preserve QH DT bit q->qh.token &= ~QTD_TOKEN_DTOGGLE; q->qh.token |= dtoggle; } q->qh.bufptr[1] &= ~BUFPTR_CPROGMASK_MASK; q->qh.bufptr[2] &= ~BUFPTR_FRAMETAG_MASK; ehci_flush_qh(q); return 0; } static int ehci_init_transfer(EHCIPacket *p) { uint32_t cpage, offset, bytes, plen; dma_addr_t page; USBBus *bus = &p->queue->ehci->bus; BusState *qbus = BUS(bus); cpage = get_field(p->qtd.token, QTD_TOKEN_CPAGE); bytes = get_field(p->qtd.token, QTD_TOKEN_TBYTES); offset = p->qtd.bufptr[0] & ~QTD_BUFPTR_MASK; qemu_sglist_init(&p->sgl, qbus->parent, 5, p->queue->ehci->as); while (bytes > 0) { if (cpage > 4) { fprintf(stderr, "cpage out of range (%d)\n", cpage); return -1; } page = p->qtd.bufptr[cpage] & QTD_BUFPTR_MASK; page += offset; plen = bytes; if (plen > 4096 - offset) { plen = 4096 - offset; offset = 0; cpage++; } qemu_sglist_add(&p->sgl, page, plen); bytes -= plen; } return 0; } static void ehci_finish_transfer(EHCIQueue *q, int len) { uint32_t cpage, offset; if (len > 0) { /* update cpage & offset */ cpage = get_field(q->qh.token, QTD_TOKEN_CPAGE); offset = q->qh.bufptr[0] & ~QTD_BUFPTR_MASK; offset += len; cpage += offset >> QTD_BUFPTR_SH; offset &= ~QTD_BUFPTR_MASK; set_field(&q->qh.token, cpage, QTD_TOKEN_CPAGE); q->qh.bufptr[0] &= QTD_BUFPTR_MASK; q->qh.bufptr[0] |= offset; } } static void ehci_async_complete_packet(USBPort *port, USBPacket *packet) { EHCIPacket *p; EHCIState *s = port->opaque; uint32_t portsc = s->portsc[port->index]; if (portsc & PORTSC_POWNER) { USBPort *companion = s->companion_ports[port->index]; companion->ops->complete(companion, packet); return; } p = container_of(packet, EHCIPacket, packet); assert(p->async == EHCI_ASYNC_INFLIGHT); if (packet->status == USB_RET_REMOVE_FROM_QUEUE) { trace_usb_ehci_packet_action(p->queue, p, "remove"); ehci_free_packet(p); return; } trace_usb_ehci_packet_action(p->queue, p, "wakeup"); p->async = EHCI_ASYNC_FINISHED; if (!p->queue->async) { s->periodic_sched_active = PERIODIC_ACTIVE; } qemu_bh_schedule(s->async_bh); } static void ehci_execute_complete(EHCIQueue *q) { EHCIPacket *p = QTAILQ_FIRST(&q->packets); uint32_t tbytes; assert(p != NULL); assert(p->qtdaddr == q->qtdaddr); assert(p->async == EHCI_ASYNC_INITIALIZED || p->async == EHCI_ASYNC_FINISHED); DPRINTF("execute_complete: qhaddr 0x%x, next 0x%x, qtdaddr 0x%x, " "status %d, actual_length %d\n", q->qhaddr, q->qh.next, q->qtdaddr, p->packet.status, p->packet.actual_length); switch (p->packet.status) { case USB_RET_SUCCESS: break; case USB_RET_IOERROR: case USB_RET_NODEV: q->qh.token |= (QTD_TOKEN_HALT | QTD_TOKEN_XACTERR); set_field(&q->qh.token, 0, QTD_TOKEN_CERR); ehci_raise_irq(q->ehci, USBSTS_ERRINT); break; case USB_RET_STALL: q->qh.token |= QTD_TOKEN_HALT; ehci_raise_irq(q->ehci, USBSTS_ERRINT); break; case USB_RET_NAK: set_field(&q->qh.altnext_qtd, 0, QH_ALTNEXT_NAKCNT); return; /* We're not done yet with this transaction */ case USB_RET_BABBLE: q->qh.token |= (QTD_TOKEN_HALT | QTD_TOKEN_BABBLE); ehci_raise_irq(q->ehci, USBSTS_ERRINT); break; default: /* should not be triggerable */ fprintf(stderr, "USB invalid response %d\n", p->packet.status); assert(0); break; } /* TODO check 4.12 for splits */ tbytes = get_field(q->qh.token, QTD_TOKEN_TBYTES); if (tbytes && p->pid == USB_TOKEN_IN) { tbytes -= p->packet.actual_length; if (tbytes) { /* 4.15.1.2 must raise int on a short input packet */ ehci_raise_irq(q->ehci, USBSTS_INT); if (q->async) { q->ehci->int_req_by_async = true; } } } else { tbytes = 0; } DPRINTF("updating tbytes to %d\n", tbytes); set_field(&q->qh.token, tbytes, QTD_TOKEN_TBYTES); ehci_finish_transfer(q, p->packet.actual_length); usb_packet_unmap(&p->packet, &p->sgl); qemu_sglist_destroy(&p->sgl); p->async = EHCI_ASYNC_NONE; q->qh.token ^= QTD_TOKEN_DTOGGLE; q->qh.token &= ~QTD_TOKEN_ACTIVE; if (q->qh.token & QTD_TOKEN_IOC) { ehci_raise_irq(q->ehci, USBSTS_INT); if (q->async) { q->ehci->int_req_by_async = true; } } } /* 4.10.3 returns "again" */ static int ehci_execute(EHCIPacket *p, const char *action) { USBEndpoint *ep; int endp; bool spd; assert(p->async == EHCI_ASYNC_NONE || p->async == EHCI_ASYNC_INITIALIZED); if (!(p->qtd.token & QTD_TOKEN_ACTIVE)) { fprintf(stderr, "Attempting to execute inactive qtd\n"); return -1; } if (get_field(p->qtd.token, QTD_TOKEN_TBYTES) > BUFF_SIZE) { ehci_trace_guest_bug(p->queue->ehci, "guest requested more bytes than allowed"); return -1; } if (!ehci_verify_pid(p->queue, &p->qtd)) { ehci_queue_stopped(p->queue); /* Mark the ep in the prev dir stopped */ } p->pid = ehci_get_pid(&p->qtd); p->queue->last_pid = p->pid; endp = get_field(p->queue->qh.epchar, QH_EPCHAR_EP); ep = usb_ep_get(p->queue->dev, p->pid, endp); if (p->async == EHCI_ASYNC_NONE) { if (ehci_init_transfer(p) != 0) { return -1; } spd = (p->pid == USB_TOKEN_IN && NLPTR_TBIT(p->qtd.altnext) == 0); usb_packet_setup(&p->packet, p->pid, ep, 0, p->qtdaddr, spd, (p->qtd.token & QTD_TOKEN_IOC) != 0); usb_packet_map(&p->packet, &p->sgl); p->async = EHCI_ASYNC_INITIALIZED; } trace_usb_ehci_packet_action(p->queue, p, action); usb_handle_packet(p->queue->dev, &p->packet); DPRINTF("submit: qh 0x%x next 0x%x qtd 0x%x pid 0x%x len %zd endp 0x%x " "status %d actual_length %d\n", p->queue->qhaddr, p->qtd.next, p->qtdaddr, p->pid, p->packet.iov.size, endp, p->packet.status, p->packet.actual_length); if (p->packet.actual_length > BUFF_SIZE) { fprintf(stderr, "ret from usb_handle_packet > BUFF_SIZE\n"); return -1; } return 1; } /* 4.7.2 */ static int ehci_process_itd(EHCIState *ehci, EHCIitd *itd, uint32_t addr) { USBDevice *dev; USBEndpoint *ep; uint32_t i, len, pid, dir, devaddr, endp; uint32_t pg, off, ptr1, ptr2, max, mult; ehci->periodic_sched_active = PERIODIC_ACTIVE; dir =(itd->bufptr[1] & ITD_BUFPTR_DIRECTION); devaddr = get_field(itd->bufptr[0], ITD_BUFPTR_DEVADDR); endp = get_field(itd->bufptr[0], ITD_BUFPTR_EP); max = get_field(itd->bufptr[1], ITD_BUFPTR_MAXPKT); mult = get_field(itd->bufptr[2], ITD_BUFPTR_MULT); for(i = 0; i < 8; i++) { if (itd->transact[i] & ITD_XACT_ACTIVE) { pg = get_field(itd->transact[i], ITD_XACT_PGSEL); off = itd->transact[i] & ITD_XACT_OFFSET_MASK; ptr1 = (itd->bufptr[pg] & ITD_BUFPTR_MASK); ptr2 = (itd->bufptr[pg+1] & ITD_BUFPTR_MASK); len = get_field(itd->transact[i], ITD_XACT_LENGTH); if (len > max * mult) { len = max * mult; } if (len > BUFF_SIZE) { return -1; } qemu_sglist_init(&ehci->isgl, DEVICE(ehci), 2, ehci->as); if (off + len > 4096) { /* transfer crosses page border */ uint32_t len2 = off + len - 4096; uint32_t len1 = len - len2; qemu_sglist_add(&ehci->isgl, ptr1 + off, len1); qemu_sglist_add(&ehci->isgl, ptr2, len2); } else { qemu_sglist_add(&ehci->isgl, ptr1 + off, len); } pid = dir ? USB_TOKEN_IN : USB_TOKEN_OUT; dev = ehci_find_device(ehci, devaddr); ep = usb_ep_get(dev, pid, endp); if (ep && ep->type == USB_ENDPOINT_XFER_ISOC) { usb_packet_setup(&ehci->ipacket, pid, ep, 0, addr, false, (itd->transact[i] & ITD_XACT_IOC) != 0); usb_packet_map(&ehci->ipacket, &ehci->isgl); usb_handle_packet(dev, &ehci->ipacket); usb_packet_unmap(&ehci->ipacket, &ehci->isgl); } else { DPRINTF("ISOCH: attempt to addess non-iso endpoint\n"); ehci->ipacket.status = USB_RET_NAK; ehci->ipacket.actual_length = 0; } qemu_sglist_destroy(&ehci->isgl); switch (ehci->ipacket.status) { case USB_RET_SUCCESS: break; default: fprintf(stderr, "Unexpected iso usb result: %d\n", ehci->ipacket.status); /* Fall through */ case USB_RET_IOERROR: case USB_RET_NODEV: /* 3.3.2: XACTERR is only allowed on IN transactions */ if (dir) { itd->transact[i] |= ITD_XACT_XACTERR; ehci_raise_irq(ehci, USBSTS_ERRINT); } break; case USB_RET_BABBLE: itd->transact[i] |= ITD_XACT_BABBLE; ehci_raise_irq(ehci, USBSTS_ERRINT); break; case USB_RET_NAK: /* no data for us, so do a zero-length transfer */ ehci->ipacket.actual_length = 0; break; } if (!dir) { set_field(&itd->transact[i], len - ehci->ipacket.actual_length, ITD_XACT_LENGTH); /* OUT */ } else { set_field(&itd->transact[i], ehci->ipacket.actual_length, ITD_XACT_LENGTH); /* IN */ } if (itd->transact[i] & ITD_XACT_IOC) { ehci_raise_irq(ehci, USBSTS_INT); } itd->transact[i] &= ~ITD_XACT_ACTIVE; } } return 0; } /* This state is the entry point for asynchronous schedule * processing. Entry here consitutes a EHCI start event state (4.8.5) */ static int ehci_state_waitlisthead(EHCIState *ehci, int async) { EHCIqh qh; int i = 0; int again = 0; uint32_t entry = ehci->asynclistaddr; /* set reclamation flag at start event (4.8.6) */ if (async) { ehci_set_usbsts(ehci, USBSTS_REC); } ehci_queues_rip_unused(ehci, async); /* Find the head of the list (4.9.1.1) */ for(i = 0; i < MAX_QH; i++) { if (get_dwords(ehci, NLPTR_GET(entry), (uint32_t *) &qh, sizeof(EHCIqh) >> 2) < 0) { return 0; } ehci_trace_qh(NULL, NLPTR_GET(entry), &qh); if (qh.epchar & QH_EPCHAR_H) { if (async) { entry |= (NLPTR_TYPE_QH << 1); } ehci_set_fetch_addr(ehci, async, entry); ehci_set_state(ehci, async, EST_FETCHENTRY); again = 1; goto out; } entry = qh.next; if (entry == ehci->asynclistaddr) { break; } } /* no head found for list. */ ehci_set_state(ehci, async, EST_ACTIVE); out: return again; } /* This state is the entry point for periodic schedule processing as * well as being a continuation state for async processing. */ static int ehci_state_fetchentry(EHCIState *ehci, int async) { int again = 0; uint32_t entry = ehci_get_fetch_addr(ehci, async); if (NLPTR_TBIT(entry)) { ehci_set_state(ehci, async, EST_ACTIVE); goto out; } /* section 4.8, only QH in async schedule */ if (async && (NLPTR_TYPE_GET(entry) != NLPTR_TYPE_QH)) { fprintf(stderr, "non queue head request in async schedule\n"); return -1; } switch (NLPTR_TYPE_GET(entry)) { case NLPTR_TYPE_QH: ehci_set_state(ehci, async, EST_FETCHQH); again = 1; break; case NLPTR_TYPE_ITD: ehci_set_state(ehci, async, EST_FETCHITD); again = 1; break; case NLPTR_TYPE_STITD: ehci_set_state(ehci, async, EST_FETCHSITD); again = 1; break; default: /* TODO: handle FSTN type */ fprintf(stderr, "FETCHENTRY: entry at %X is of type %d " "which is not supported yet\n", entry, NLPTR_TYPE_GET(entry)); return -1; } out: return again; } static EHCIQueue *ehci_state_fetchqh(EHCIState *ehci, int async) { uint32_t entry; EHCIQueue *q; EHCIqh qh; entry = ehci_get_fetch_addr(ehci, async); q = ehci_find_queue_by_qh(ehci, entry, async); if (NULL == q) { q = ehci_alloc_queue(ehci, entry, async); } q->seen++; if (q->seen > 1) { /* we are going in circles -- stop processing */ ehci_set_state(ehci, async, EST_ACTIVE); q = NULL; goto out; } if (get_dwords(ehci, NLPTR_GET(q->qhaddr), (uint32_t *) &qh, sizeof(EHCIqh) >> 2) < 0) { q = NULL; goto out; } ehci_trace_qh(q, NLPTR_GET(q->qhaddr), &qh); /* * The overlay area of the qh should never be changed by the guest, * except when idle, in which case the reset is a nop. */ if (!ehci_verify_qh(q, &qh)) { if (ehci_reset_queue(q) > 0) { ehci_trace_guest_bug(ehci, "guest updated active QH"); } } q->qh = qh; q->transact_ctr = get_field(q->qh.epcap, QH_EPCAP_MULT); if (q->transact_ctr == 0) { /* Guest bug in some versions of windows */ q->transact_ctr = 4; } if (q->dev == NULL) { q->dev = ehci_find_device(q->ehci, get_field(q->qh.epchar, QH_EPCHAR_DEVADDR)); } if (async && (q->qh.epchar & QH_EPCHAR_H)) { /* EHCI spec version 1.0 Section 4.8.3 & 4.10.1 */ if (ehci->usbsts & USBSTS_REC) { ehci_clear_usbsts(ehci, USBSTS_REC); } else { DPRINTF("FETCHQH: QH 0x%08x. H-bit set, reclamation status reset" " - done processing\n", q->qhaddr); ehci_set_state(ehci, async, EST_ACTIVE); q = NULL; goto out; } } #if EHCI_DEBUG if (q->qhaddr != q->qh.next) { DPRINTF("FETCHQH: QH 0x%08x (h %x halt %x active %x) next 0x%08x\n", q->qhaddr, q->qh.epchar & QH_EPCHAR_H, q->qh.token & QTD_TOKEN_HALT, q->qh.token & QTD_TOKEN_ACTIVE, q->qh.next); } #endif if (q->qh.token & QTD_TOKEN_HALT) { ehci_set_state(ehci, async, EST_HORIZONTALQH); } else if ((q->qh.token & QTD_TOKEN_ACTIVE) && (NLPTR_TBIT(q->qh.current_qtd) == 0)) { q->qtdaddr = q->qh.current_qtd; ehci_set_state(ehci, async, EST_FETCHQTD); } else { /* EHCI spec version 1.0 Section 4.10.2 */ ehci_set_state(ehci, async, EST_ADVANCEQUEUE); } out: return q; } static int ehci_state_fetchitd(EHCIState *ehci, int async) { uint32_t entry; EHCIitd itd; assert(!async); entry = ehci_get_fetch_addr(ehci, async); if (get_dwords(ehci, NLPTR_GET(entry), (uint32_t *) &itd, sizeof(EHCIitd) >> 2) < 0) { return -1; } ehci_trace_itd(ehci, entry, &itd); if (ehci_process_itd(ehci, &itd, entry) != 0) { return -1; } put_dwords(ehci, NLPTR_GET(entry), (uint32_t *) &itd, sizeof(EHCIitd) >> 2); ehci_set_fetch_addr(ehci, async, itd.next); ehci_set_state(ehci, async, EST_FETCHENTRY); return 1; } static int ehci_state_fetchsitd(EHCIState *ehci, int async) { uint32_t entry; EHCIsitd sitd; assert(!async); entry = ehci_get_fetch_addr(ehci, async); if (get_dwords(ehci, NLPTR_GET(entry), (uint32_t *)&sitd, sizeof(EHCIsitd) >> 2) < 0) { return 0; } ehci_trace_sitd(ehci, entry, &sitd); if (!(sitd.results & SITD_RESULTS_ACTIVE)) { /* siTD is not active, nothing to do */; } else { /* TODO: split transfers are not implemented */ fprintf(stderr, "WARNING: Skipping active siTD\n"); } ehci_set_fetch_addr(ehci, async, sitd.next); ehci_set_state(ehci, async, EST_FETCHENTRY); return 1; } /* Section 4.10.2 - paragraph 3 */ static int ehci_state_advqueue(EHCIQueue *q) { #if 0 /* TO-DO: 4.10.2 - paragraph 2 * if I-bit is set to 1 and QH is not active * go to horizontal QH */ if (I-bit set) { ehci_set_state(ehci, async, EST_HORIZONTALQH); goto out; } #endif /* * want data and alt-next qTD is valid */ if (((q->qh.token & QTD_TOKEN_TBYTES_MASK) != 0) && (NLPTR_TBIT(q->qh.altnext_qtd) == 0)) { q->qtdaddr = q->qh.altnext_qtd; ehci_set_state(q->ehci, q->async, EST_FETCHQTD); /* * next qTD is valid */ } else if (NLPTR_TBIT(q->qh.next_qtd) == 0) { q->qtdaddr = q->qh.next_qtd; ehci_set_state(q->ehci, q->async, EST_FETCHQTD); /* * no valid qTD, try next QH */ } else { ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH); } return 1; } /* Section 4.10.2 - paragraph 4 */ static int ehci_state_fetchqtd(EHCIQueue *q) { EHCIqtd qtd; EHCIPacket *p; int again = 1; if (get_dwords(q->ehci, NLPTR_GET(q->qtdaddr), (uint32_t *) &qtd, sizeof(EHCIqtd) >> 2) < 0) { return 0; } ehci_trace_qtd(q, NLPTR_GET(q->qtdaddr), &qtd); p = QTAILQ_FIRST(&q->packets); if (p != NULL) { if (!ehci_verify_qtd(p, &qtd)) { ehci_cancel_queue(q); if (qtd.token & QTD_TOKEN_ACTIVE) { ehci_trace_guest_bug(q->ehci, "guest updated active qTD"); } p = NULL; } else { p->qtd = qtd; ehci_qh_do_overlay(q); } } if (!(qtd.token & QTD_TOKEN_ACTIVE)) { ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH); } else if (p != NULL) { switch (p->async) { case EHCI_ASYNC_NONE: case EHCI_ASYNC_INITIALIZED: /* Not yet executed (MULT), or previously nacked (int) packet */ ehci_set_state(q->ehci, q->async, EST_EXECUTE); break; case EHCI_ASYNC_INFLIGHT: /* Check if the guest has added new tds to the queue */ again = ehci_fill_queue(QTAILQ_LAST(&q->packets, pkts_head)); /* Unfinished async handled packet, go horizontal */ ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH); break; case EHCI_ASYNC_FINISHED: /* Complete executing of the packet */ ehci_set_state(q->ehci, q->async, EST_EXECUTING); break; } } else { p = ehci_alloc_packet(q); p->qtdaddr = q->qtdaddr; p->qtd = qtd; ehci_set_state(q->ehci, q->async, EST_EXECUTE); } return again; } static int ehci_state_horizqh(EHCIQueue *q) { int again = 0; if (ehci_get_fetch_addr(q->ehci, q->async) != q->qh.next) { ehci_set_fetch_addr(q->ehci, q->async, q->qh.next); ehci_set_state(q->ehci, q->async, EST_FETCHENTRY); again = 1; } else { ehci_set_state(q->ehci, q->async, EST_ACTIVE); } return again; } /* Returns "again" */ static int ehci_fill_queue(EHCIPacket *p) { USBEndpoint *ep = p->packet.ep; EHCIQueue *q = p->queue; EHCIqtd qtd = p->qtd; uint32_t qtdaddr; for (;;) { if (NLPTR_TBIT(qtd.next) != 0) { break; } qtdaddr = qtd.next; /* * Detect circular td lists, Windows creates these, counting on the * active bit going low after execution to make the queue stop. */ QTAILQ_FOREACH(p, &q->packets, next) { if (p->qtdaddr == qtdaddr) { goto leave; } } if (get_dwords(q->ehci, NLPTR_GET(qtdaddr), (uint32_t *) &qtd, sizeof(EHCIqtd) >> 2) < 0) { return -1; } ehci_trace_qtd(q, NLPTR_GET(qtdaddr), &qtd); if (!(qtd.token & QTD_TOKEN_ACTIVE)) { break; } if (!ehci_verify_pid(q, &qtd)) { ehci_trace_guest_bug(q->ehci, "guest queued token with wrong pid"); break; } p = ehci_alloc_packet(q); p->qtdaddr = qtdaddr; p->qtd = qtd; if (ehci_execute(p, "queue") == -1) { return -1; } assert(p->packet.status == USB_RET_ASYNC); p->async = EHCI_ASYNC_INFLIGHT; } leave: usb_device_flush_ep_queue(ep->dev, ep); return 1; } static int ehci_state_execute(EHCIQueue *q) { EHCIPacket *p = QTAILQ_FIRST(&q->packets); int again = 0; assert(p != NULL); assert(p->qtdaddr == q->qtdaddr); if (ehci_qh_do_overlay(q) != 0) { return -1; } // TODO verify enough time remains in the uframe as in 4.4.1.1 // TODO write back ptr to async list when done or out of time /* 4.10.3, bottom of page 82, go horizontal on transaction counter == 0 */ if (!q->async && q->transact_ctr == 0) { ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH); again = 1; goto out; } if (q->async) { ehci_set_usbsts(q->ehci, USBSTS_REC); } again = ehci_execute(p, "process"); if (again == -1) { goto out; } if (p->packet.status == USB_RET_ASYNC) { ehci_flush_qh(q); trace_usb_ehci_packet_action(p->queue, p, "async"); p->async = EHCI_ASYNC_INFLIGHT; ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH); if (q->async) { again = ehci_fill_queue(p); } else { again = 1; } goto out; } ehci_set_state(q->ehci, q->async, EST_EXECUTING); again = 1; out: return again; } static int ehci_state_executing(EHCIQueue *q) { EHCIPacket *p = QTAILQ_FIRST(&q->packets); assert(p != NULL); assert(p->qtdaddr == q->qtdaddr); ehci_execute_complete(q); /* 4.10.3 */ if (!q->async && q->transact_ctr > 0) { q->transact_ctr--; } /* 4.10.5 */ if (p->packet.status == USB_RET_NAK) { ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH); } else { ehci_set_state(q->ehci, q->async, EST_WRITEBACK); } ehci_flush_qh(q); return 1; } static int ehci_state_writeback(EHCIQueue *q) { EHCIPacket *p = QTAILQ_FIRST(&q->packets); uint32_t *qtd, addr; int again = 0; /* Write back the QTD from the QH area */ assert(p != NULL); assert(p->qtdaddr == q->qtdaddr); ehci_trace_qtd(q, NLPTR_GET(p->qtdaddr), (EHCIqtd *) &q->qh.next_qtd); qtd = (uint32_t *) &q->qh.next_qtd; addr = NLPTR_GET(p->qtdaddr); put_dwords(q->ehci, addr + 2 * sizeof(uint32_t), qtd + 2, 2); ehci_free_packet(p); /* * EHCI specs say go horizontal here. * * We can also advance the queue here for performance reasons. We * need to take care to only take that shortcut in case we've * processed the qtd just written back without errors, i.e. halt * bit is clear. */ if (q->qh.token & QTD_TOKEN_HALT) { ehci_set_state(q->ehci, q->async, EST_HORIZONTALQH); again = 1; } else { ehci_set_state(q->ehci, q->async, EST_ADVANCEQUEUE); again = 1; } return again; } /* * This is the state machine that is common to both async and periodic */ static void ehci_advance_state(EHCIState *ehci, int async) { EHCIQueue *q = NULL; int again; do { switch(ehci_get_state(ehci, async)) { case EST_WAITLISTHEAD: again = ehci_state_waitlisthead(ehci, async); break; case EST_FETCHENTRY: again = ehci_state_fetchentry(ehci, async); break; case EST_FETCHQH: q = ehci_state_fetchqh(ehci, async); if (q != NULL) { assert(q->async == async); again = 1; } else { again = 0; } break; case EST_FETCHITD: again = ehci_state_fetchitd(ehci, async); break; case EST_FETCHSITD: again = ehci_state_fetchsitd(ehci, async); break; case EST_ADVANCEQUEUE: assert(q != NULL); again = ehci_state_advqueue(q); break; case EST_FETCHQTD: assert(q != NULL); again = ehci_state_fetchqtd(q); break; case EST_HORIZONTALQH: assert(q != NULL); again = ehci_state_horizqh(q); break; case EST_EXECUTE: assert(q != NULL); again = ehci_state_execute(q); if (async) { ehci->async_stepdown = 0; } break; case EST_EXECUTING: assert(q != NULL); if (async) { ehci->async_stepdown = 0; } again = ehci_state_executing(q); break; case EST_WRITEBACK: assert(q != NULL); again = ehci_state_writeback(q); if (!async) { ehci->periodic_sched_active = PERIODIC_ACTIVE; } break; default: fprintf(stderr, "Bad state!\n"); again = -1; assert(0); break; } if (again < 0) { fprintf(stderr, "processing error - resetting ehci HC\n"); ehci_reset(ehci); again = 0; } } while (again); } static void ehci_advance_async_state(EHCIState *ehci) { const int async = 1; switch(ehci_get_state(ehci, async)) { case EST_INACTIVE: if (!ehci_async_enabled(ehci)) { break; } ehci_set_state(ehci, async, EST_ACTIVE); // No break, fall through to ACTIVE case EST_ACTIVE: if (!ehci_async_enabled(ehci)) { ehci_queues_rip_all(ehci, async); ehci_set_state(ehci, async, EST_INACTIVE); break; } /* make sure guest has acknowledged the doorbell interrupt */ /* TO-DO: is this really needed? */ if (ehci->usbsts & USBSTS_IAA) { DPRINTF("IAA status bit still set.\n"); break; } /* check that address register has been set */ if (ehci->asynclistaddr == 0) { break; } ehci_set_state(ehci, async, EST_WAITLISTHEAD); ehci_advance_state(ehci, async); /* If the doorbell is set, the guest wants to make a change to the * schedule. The host controller needs to release cached data. * (section 4.8.2) */ if (ehci->usbcmd & USBCMD_IAAD) { /* Remove all unseen qhs from the async qhs queue */ ehci_queues_rip_unseen(ehci, async); trace_usb_ehci_doorbell_ack(); ehci->usbcmd &= ~USBCMD_IAAD; ehci_raise_irq(ehci, USBSTS_IAA); } break; default: /* this should only be due to a developer mistake */ fprintf(stderr, "ehci: Bad asynchronous state %d. " "Resetting to active\n", ehci->astate); assert(0); } } static void ehci_advance_periodic_state(EHCIState *ehci) { uint32_t entry; uint32_t list; const int async = 0; // 4.6 switch(ehci_get_state(ehci, async)) { case EST_INACTIVE: if (!(ehci->frindex & 7) && ehci_periodic_enabled(ehci)) { ehci_set_state(ehci, async, EST_ACTIVE); // No break, fall through to ACTIVE } else break; case EST_ACTIVE: if (!(ehci->frindex & 7) && !ehci_periodic_enabled(ehci)) { ehci_queues_rip_all(ehci, async); ehci_set_state(ehci, async, EST_INACTIVE); break; } list = ehci->periodiclistbase & 0xfffff000; /* check that register has been set */ if (list == 0) { break; } list |= ((ehci->frindex & 0x1ff8) >> 1); if (get_dwords(ehci, list, &entry, 1) < 0) { break; } DPRINTF("PERIODIC state adv fr=%d. [%08X] -> %08X\n", ehci->frindex / 8, list, entry); ehci_set_fetch_addr(ehci, async,entry); ehci_set_state(ehci, async, EST_FETCHENTRY); ehci_advance_state(ehci, async); ehci_queues_rip_unused(ehci, async); break; default: /* this should only be due to a developer mistake */ fprintf(stderr, "ehci: Bad periodic state %d. " "Resetting to active\n", ehci->pstate); assert(0); } } static void ehci_update_frindex(EHCIState *ehci, int uframes) { int i; if (!ehci_enabled(ehci) && ehci->pstate == EST_INACTIVE) { return; } for (i = 0; i < uframes; i++) { ehci->frindex++; if (ehci->frindex == 0x00002000) { ehci_raise_irq(ehci, USBSTS_FLR); } if (ehci->frindex == 0x00004000) { ehci_raise_irq(ehci, USBSTS_FLR); ehci->frindex = 0; if (ehci->usbsts_frindex >= 0x00004000) { ehci->usbsts_frindex -= 0x00004000; } else { ehci->usbsts_frindex = 0; } } } } static void ehci_frame_timer(void *opaque) { EHCIState *ehci = opaque; int need_timer = 0; int64_t expire_time, t_now; uint64_t ns_elapsed; int uframes, skipped_uframes; int i; t_now = qemu_get_clock_ns(vm_clock); ns_elapsed = t_now - ehci->last_run_ns; uframes = ns_elapsed / UFRAME_TIMER_NS; if (ehci_periodic_enabled(ehci) || ehci->pstate != EST_INACTIVE) { need_timer++; if (uframes > (ehci->maxframes * 8)) { skipped_uframes = uframes - (ehci->maxframes * 8); ehci_update_frindex(ehci, skipped_uframes); ehci->last_run_ns += UFRAME_TIMER_NS * skipped_uframes; uframes -= skipped_uframes; DPRINTF("WARNING - EHCI skipped %d uframes\n", skipped_uframes); } for (i = 0; i < uframes; i++) { /* * If we're running behind schedule, we should not catch up * too fast, as that will make some guests unhappy: * 1) We must process a minimum of MIN_UFR_PER_TICK frames, * otherwise we will never catch up * 2) Process frames until the guest has requested an irq (IOC) */ if (i >= MIN_UFR_PER_TICK) { ehci_commit_irq(ehci); if ((ehci->usbsts & USBINTR_MASK) & ehci->usbintr) { break; } } if (ehci->periodic_sched_active) { ehci->periodic_sched_active--; } ehci_update_frindex(ehci, 1); if ((ehci->frindex & 7) == 0) { ehci_advance_periodic_state(ehci); } ehci->last_run_ns += UFRAME_TIMER_NS; } } else { ehci->periodic_sched_active = 0; ehci_update_frindex(ehci, uframes); ehci->last_run_ns += UFRAME_TIMER_NS * uframes; } if (ehci->periodic_sched_active) { ehci->async_stepdown = 0; } else if (ehci->async_stepdown < ehci->maxframes / 2) { ehci->async_stepdown++; } /* Async is not inside loop since it executes everything it can once * called */ if (ehci_async_enabled(ehci) || ehci->astate != EST_INACTIVE) { need_timer++; ehci_advance_async_state(ehci); } ehci_commit_irq(ehci); if (ehci->usbsts_pending) { need_timer++; ehci->async_stepdown = 0; } if (ehci_enabled(ehci) && (ehci->usbintr & USBSTS_FLR)) { need_timer++; } if (need_timer) { /* If we've raised int, we speed up the timer, so that we quickly * notice any new packets queued up in response */ if (ehci->int_req_by_async && (ehci->usbsts & USBSTS_INT)) { expire_time = t_now + get_ticks_per_sec() / (FRAME_TIMER_FREQ * 4); ehci->int_req_by_async = false; } else { expire_time = t_now + (get_ticks_per_sec() * (ehci->async_stepdown+1) / FRAME_TIMER_FREQ); } qemu_mod_timer(ehci->frame_timer, expire_time); } } static const MemoryRegionOps ehci_mmio_caps_ops = { .read = ehci_caps_read, .valid.min_access_size = 1, .valid.max_access_size = 4, .impl.min_access_size = 1, .impl.max_access_size = 1, .endianness = DEVICE_LITTLE_ENDIAN, }; static const MemoryRegionOps ehci_mmio_opreg_ops = { .read = ehci_opreg_read, .write = ehci_opreg_write, .valid.min_access_size = 4, .valid.max_access_size = 4, .endianness = DEVICE_LITTLE_ENDIAN, }; static const MemoryRegionOps ehci_mmio_port_ops = { .read = ehci_port_read, .write = ehci_port_write, .valid.min_access_size = 4, .valid.max_access_size = 4, .endianness = DEVICE_LITTLE_ENDIAN, }; static USBPortOps ehci_port_ops = { .attach = ehci_attach, .detach = ehci_detach, .child_detach = ehci_child_detach, .wakeup = ehci_wakeup, .complete = ehci_async_complete_packet, }; static USBBusOps ehci_bus_ops = { .register_companion = ehci_register_companion, .wakeup_endpoint = ehci_wakeup_endpoint, }; static void usb_ehci_pre_save(void *opaque) { EHCIState *ehci = opaque; uint32_t new_frindex; /* Round down frindex to a multiple of 8 for migration compatibility */ new_frindex = ehci->frindex & ~7; ehci->last_run_ns -= (ehci->frindex - new_frindex) * UFRAME_TIMER_NS; ehci->frindex = new_frindex; } static int usb_ehci_post_load(void *opaque, int version_id) { EHCIState *s = opaque; int i; for (i = 0; i < NB_PORTS; i++) { USBPort *companion = s->companion_ports[i]; if (companion == NULL) { continue; } if (s->portsc[i] & PORTSC_POWNER) { companion->dev = s->ports[i].dev; } else { companion->dev = NULL; } } return 0; } static void usb_ehci_vm_state_change(void *opaque, int running, RunState state) { EHCIState *ehci = opaque; /* * We don't migrate the EHCIQueue-s, instead we rebuild them for the * schedule in guest memory. We must do the rebuilt ASAP, so that * USB-devices which have async handled packages have a packet in the * ep queue to match the completion with. */ if (state == RUN_STATE_RUNNING) { ehci_advance_async_state(ehci); } /* * The schedule rebuilt from guest memory could cause the migration dest * to miss a QH unlink, and fail to cancel packets, since the unlinked QH * will never have existed on the destination. Therefor we must flush the * async schedule on savevm to catch any not yet noticed unlinks. */ if (state == RUN_STATE_SAVE_VM) { ehci_advance_async_state(ehci); ehci_queues_rip_unseen(ehci, 1); } } const VMStateDescription vmstate_ehci = { .name = "ehci-core", .version_id = 2, .minimum_version_id = 1, .pre_save = usb_ehci_pre_save, .post_load = usb_ehci_post_load, .fields = (VMStateField[]) { /* mmio registers */ VMSTATE_UINT32(usbcmd, EHCIState), VMSTATE_UINT32(usbsts, EHCIState), VMSTATE_UINT32_V(usbsts_pending, EHCIState, 2), VMSTATE_UINT32_V(usbsts_frindex, EHCIState, 2), VMSTATE_UINT32(usbintr, EHCIState), VMSTATE_UINT32(frindex, EHCIState), VMSTATE_UINT32(ctrldssegment, EHCIState), VMSTATE_UINT32(periodiclistbase, EHCIState), VMSTATE_UINT32(asynclistaddr, EHCIState), VMSTATE_UINT32(configflag, EHCIState), VMSTATE_UINT32(portsc[0], EHCIState), VMSTATE_UINT32(portsc[1], EHCIState), VMSTATE_UINT32(portsc[2], EHCIState), VMSTATE_UINT32(portsc[3], EHCIState), VMSTATE_UINT32(portsc[4], EHCIState), VMSTATE_UINT32(portsc[5], EHCIState), /* frame timer */ VMSTATE_TIMER(frame_timer, EHCIState), VMSTATE_UINT64(last_run_ns, EHCIState), VMSTATE_UINT32(async_stepdown, EHCIState), /* schedule state */ VMSTATE_UINT32(astate, EHCIState), VMSTATE_UINT32(pstate, EHCIState), VMSTATE_UINT32(a_fetch_addr, EHCIState), VMSTATE_UINT32(p_fetch_addr, EHCIState), VMSTATE_END_OF_LIST() } }; void usb_ehci_realize(EHCIState *s, DeviceState *dev, Error **errp) { int i; if (s->portnr > NB_PORTS) { error_setg(errp, "Too many ports! Max. port number is %d.", NB_PORTS); return; } usb_bus_new(&s->bus, &ehci_bus_ops, dev); for (i = 0; i < s->portnr; i++) { usb_register_port(&s->bus, &s->ports[i], s, i, &ehci_port_ops, USB_SPEED_MASK_HIGH); s->ports[i].dev = 0; } s->frame_timer = qemu_new_timer_ns(vm_clock, ehci_frame_timer, s); s->async_bh = qemu_bh_new(ehci_frame_timer, s); qemu_register_reset(ehci_reset, s); qemu_add_vm_change_state_handler(usb_ehci_vm_state_change, s); } void usb_ehci_init(EHCIState *s, DeviceState *dev) { /* 2.2 host controller interface version */ s->caps[0x00] = (uint8_t)(s->opregbase - s->capsbase); s->caps[0x01] = 0x00; s->caps[0x02] = 0x00; s->caps[0x03] = 0x01; /* HC version */ s->caps[0x04] = s->portnr; /* Number of downstream ports */ s->caps[0x05] = 0x00; /* No companion ports at present */ s->caps[0x06] = 0x00; s->caps[0x07] = 0x00; s->caps[0x08] = 0x80; /* We can cache whole frame, no 64-bit */ s->caps[0x0a] = 0x00; s->caps[0x0b] = 0x00; QTAILQ_INIT(&s->aqueues); QTAILQ_INIT(&s->pqueues); usb_packet_init(&s->ipacket); memory_region_init(&s->mem, NULL, "ehci", MMIO_SIZE); memory_region_init_io(&s->mem_caps, NULL, &ehci_mmio_caps_ops, s, "capabilities", CAPA_SIZE); memory_region_init_io(&s->mem_opreg, NULL, &ehci_mmio_opreg_ops, s, "operational", s->portscbase); memory_region_init_io(&s->mem_ports, NULL, &ehci_mmio_port_ops, s, "ports", 4 * s->portnr); memory_region_add_subregion(&s->mem, s->capsbase, &s->mem_caps); memory_region_add_subregion(&s->mem, s->opregbase, &s->mem_opreg); memory_region_add_subregion(&s->mem, s->opregbase + s->portscbase, &s->mem_ports); } /* * vim: expandtab ts=4 */