/* * QEMU AHCI Emulation * * Copyright (c) 2010 qiaochong@loongson.cn * Copyright (c) 2010 Roland Elek * Copyright (c) 2010 Sebastian Herbszt * Copyright (c) 2010 Alexander Graf * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, see . * */ #ifndef HW_IDE_AHCI_H #define HW_IDE_AHCI_H #define AHCI_PCI_BAR 5 #define AHCI_MAX_PORTS 32 #define AHCI_MAX_SG 168 /* hardware max is 64K */ #define AHCI_DMA_BOUNDARY 0xffffffff #define AHCI_USE_CLUSTERING 0 #define AHCI_MAX_CMDS 32 #define AHCI_CMD_SZ 32 #define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ) #define AHCI_RX_FIS_SZ 256 #define AHCI_CMD_TBL_CDB 0x40 #define AHCI_CMD_TBL_HDR_SZ 0x80 #define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16)) #define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS) #define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \ AHCI_RX_FIS_SZ) #define AHCI_IRQ_ON_SG (1 << 31) #define AHCI_CMD_ATAPI (1 << 5) #define AHCI_CMD_WRITE (1 << 6) #define AHCI_CMD_PREFETCH (1 << 7) #define AHCI_CMD_RESET (1 << 8) #define AHCI_CMD_CLR_BUSY (1 << 10) #define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ #define RX_FIS_SDB 0x58 /* offset of SDB FIS data */ #define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */ /* global controller registers */ #define HOST_CAP 0x00 /* host capabilities */ #define HOST_CTL 0x04 /* global host control */ #define HOST_IRQ_STAT 0x08 /* interrupt status */ #define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ #define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ /* HOST_CTL bits */ #define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */ #define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */ #define HOST_CTL_AHCI_EN (1 << 31) /* AHCI enabled */ /* HOST_CAP bits */ #define HOST_CAP_SSC (1 << 14) /* Slumber capable */ #define HOST_CAP_AHCI (1 << 18) /* AHCI only */ #define HOST_CAP_CLO (1 << 24) /* Command List Override support */ #define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */ #define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */ #define HOST_CAP_64 (1 << 31) /* PCI DAC (64-bit DMA) support */ /* registers for each SATA port */ #define PORT_LST_ADDR 0x00 /* command list DMA addr */ #define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */ #define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */ #define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */ #define PORT_IRQ_STAT 0x10 /* interrupt status */ #define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */ #define PORT_CMD 0x18 /* port command */ #define PORT_TFDATA 0x20 /* taskfile data */ #define PORT_SIG 0x24 /* device TF signature */ #define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */ #define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */ #define PORT_SCR_ERR 0x30 /* SATA phy register: SError */ #define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */ #define PORT_CMD_ISSUE 0x38 /* command issue */ #define PORT_RESERVED 0x3c /* reserved */ /* PORT_IRQ_{STAT,MASK} bits */ #define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */ #define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ #define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ #define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ #define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ #define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ #define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ #define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ #define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ #define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ #define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ #define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ #define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ #define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ #define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ #define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ #define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ #define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \ PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \ PORT_IRQ_UNK_FIS) #define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \ PORT_IRQ_HBUS_DATA_ERR) #define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) /* PORT_CMD bits */ #define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ #define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ #define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ #define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ #define PORT_CMD_CLO (1 << 3) /* Command list override */ #define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ #define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ #define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ #define PORT_CMD_ICC_MASK (0xf << 28) /* i/f ICC state mask */ #define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ #define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ #define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ #define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */ #define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */ #define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */ #define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */ #define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */ #define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */ #define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */ #define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence Status */ #define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */ #define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier Status */ #define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */ #define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error Status */ #define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */ #define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */ #define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */ #define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */ #define PORT_IRQ_STAT_CPDS (1 << 31) /* Code Port Detect Status */ /* ap->flags bits */ #define AHCI_FLAG_NO_NCQ (1 << 24) #define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */ #define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */ #define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */ #define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */ #define ATA_SRST (1 << 2) /* software reset */ #define STATE_RUN 0 #define STATE_RESET 1 #define SATA_SCR_SSTATUS_DET_NODEV 0x0 #define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3 #define SATA_SCR_SSTATUS_SPD_NODEV 0x00 #define SATA_SCR_SSTATUS_SPD_GEN1 0x10 #define SATA_SCR_SSTATUS_IPM_NODEV 0x000 #define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100 #define AHCI_SCR_SCTL_DET 0xf #define SATA_FIS_TYPE_REGISTER_H2D 0x27 #define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80 #define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f #define AHCI_CMD_HDR_PRDT_LEN 16 #define SATA_SIGNATURE_CDROM 0xeb140000 #define SATA_SIGNATURE_DISK 0x00000101 #define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20 /* Shouldn't this be 0x2c? */ #define AHCI_PORT_REGS_START_ADDR 0x100 #define AHCI_PORT_ADDR_OFFSET_MASK 0x7f #define AHCI_PORT_ADDR_OFFSET_LEN 0x80 #define AHCI_NUM_COMMAND_SLOTS 31 #define AHCI_SUPPORTED_SPEED 20 #define AHCI_SUPPORTED_SPEED_GEN1 1 #define AHCI_VERSION_1_0 0x10000 #define AHCI_PROGMODE_MAJOR_REV_1 1 #define AHCI_COMMAND_TABLE_ACMD 0x40 #define IDE_FEATURE_DMA 1 #define READ_FPDMA_QUEUED 0x60 #define WRITE_FPDMA_QUEUED 0x61 #define RES_FIS_DSFIS 0x00 #define RES_FIS_PSFIS 0x20 #define RES_FIS_RFIS 0x40 #define RES_FIS_SDBFIS 0x58 #define RES_FIS_UFIS 0x60 typedef struct AHCIControlRegs { uint32_t cap; uint32_t ghc; uint32_t irqstatus; uint32_t impl; uint32_t version; } AHCIControlRegs; typedef struct AHCIPortRegs { uint32_t lst_addr; uint32_t lst_addr_hi; uint32_t fis_addr; uint32_t fis_addr_hi; uint32_t irq_stat; uint32_t irq_mask; uint32_t cmd; uint32_t unused0; uint32_t tfdata; uint32_t sig; uint32_t scr_stat; uint32_t scr_ctl; uint32_t scr_err; uint32_t scr_act; uint32_t cmd_issue; uint32_t reserved; } AHCIPortRegs; typedef struct AHCICmdHdr { uint32_t opts; uint32_t status; uint64_t tbl_addr; uint32_t reserved[4]; } QEMU_PACKED AHCICmdHdr; typedef struct AHCI_SG { uint64_t addr; uint32_t reserved; uint32_t flags_size; } QEMU_PACKED AHCI_SG; typedef struct AHCIDevice AHCIDevice; typedef struct NCQTransferState { AHCIDevice *drive; BlockDriverAIOCB *aiocb; QEMUSGList sglist; BlockAcctCookie acct; uint16_t sector_count; uint64_t lba; uint8_t tag; int slot; int used; } NCQTransferState; struct AHCIDevice { IDEDMA dma; IDEBus port; int port_no; uint32_t port_state; uint32_t finished; AHCIPortRegs port_regs; struct AHCIState *hba; QEMUBH *check_bh; uint8_t *lst; uint8_t *res_fis; int dma_status; int done_atapi_packet; int busy_slot; int init_d2h_sent; BlockDriverCompletionFunc *dma_cb; AHCICmdHdr *cur_cmd; NCQTransferState ncq_tfs[AHCI_MAX_CMDS]; }; typedef struct AHCIState { AHCIDevice *dev; AHCIControlRegs control_regs; MemoryRegion mem; int ports; qemu_irq irq; } AHCIState; typedef struct AHCIPCIState { PCIDevice card; AHCIState ahci; } AHCIPCIState; typedef struct NCQFrame { uint8_t fis_type; uint8_t c; uint8_t command; uint8_t sector_count_low; uint8_t lba0; uint8_t lba1; uint8_t lba2; uint8_t fua; uint8_t lba3; uint8_t lba4; uint8_t lba5; uint8_t sector_count_high; uint8_t tag; uint8_t reserved5; uint8_t reserved6; uint8_t control; uint8_t reserved7; uint8_t reserved8; uint8_t reserved9; uint8_t reserved10; } QEMU_PACKED NCQFrame; void ahci_init(AHCIState *s, DeviceState *qdev, int ports); void ahci_uninit(AHCIState *s); void ahci_reset(void *opaque); #endif /* HW_IDE_AHCI_H */