Not sharing code from precopy/unix because we have to read back the
tcp parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190227105128.1655-4-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup for clash with Yury's
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190227105128.1655-2-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup for class with Yury's series
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-5-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Disabled the test for now, not happy on aarch64
Sometimes a test's main() function recognizes that the environment
does not support the test, and therefore exits. In this case, we
still should run g_test_run() so that a TAP harness will print the
test plan ("1..0") and the test will be marked as skipped.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1543513531-1151-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The migration test for s390x sometimes hangs when running with TCG,
similar to the problems that we have already observed with TCG for
the ppc64 guests. Thus disable the s390x test when we are not running
with KVM for now until the problem with TCG has been resolved.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We can re-use the s390-ccw bios code to implement a small firmware
for a s390x guest which prints out the "A" and "B" characters and
modifies the memory, as required for the migration test.
[quintela: Converted the compile script to Makefile rules]
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1539078677-25396-1-git-send-email-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up Makefile since the aarch patch sneaked in first
This patch adds migration test support for aarch64. The test code, which
implements the same functionality as x86, is booted as a kernel in qemu.
Here are the design choices we make for aarch64:
* We choose this -kernel approach because aarch64 QEMU doesn't provide a
built-in fw like x86 does. So instead of relying on a boot loader, we
use -kernel approach for aarch64.
* The serial output is sent to PL011 directly.
* The physical memory base for mach-virt machine is 0x40000000. We change
the start_address and end_address for aarch64.
In addition to providing the binary, this patch also includes the source
code and the build script in tests/migration/aarch64. So users can change
the source and/or re-compile the binary as they wish.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1538669326-28135-1-git-send-email-wei@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The SLOF boot process is always quite slow ... but we can speed it up
a little bit by specifying "-nodefaults" and by using the "nvramrc"
variable instead of "boot-command" (since "nvramrc" is evaluated earlier
in the SLOF boot process than "boot-command").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1537204330-16076-1-git-send-email-thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch moves the settings related migration-test from the
migration-test.c file to a new header file.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-4-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Recently a new configure option, CROSS_CC_GUEST, was added to
$(TARGET)-softmmu/config-target.mak to support TCG-related tests. This
patch tries to leverage this option to support cross compilation when the
migration boot block file is being re-generated:
* The x86 related files are moved to a new sub-dir (named ./i386).
* A new top-layer Makefile is created in tests/migration/ directory.
This Makefile searches and parses CROSS_CC_GUEST to generate CROSS_PREFIX.
The CROSS_PREFIX, if available, is then passed to migration/$ARCH/Makefile.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-3-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running "make check" on a non-POWER host, the output is quite
distorted like this:
[...]
GTESTER check-qtest-nios2
GTESTER check-qtest-or1k
GTESTER check-qtest-ppc64
Skipping test: kvm_hv not available Skipping test: kvm_hv not available Skipping test: kvm_hv not available Skipping test: kvm_hv not available GTESTER check-qtest-ppcemb
GTESTER check-qtest-ppc
GTESTER check-qtest-riscv32
GTESTER check-qtest-riscv64
[...]
Move the check to the beginning of the main function instead, so that
we do not have to test the condition again and again for each test,
and better use g_test_message() instead of g_print() here, like it is
also done in ufd_version_check() already.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-2-git-send-email-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leaving interpolation into JSON to qmp() is more robust than building
QMP input manually, as explained in the recent commit "tests: Clean up
string interpolation into QMP input (simple cases)".
migration-test.c interpolates strings into JSON in a few places:
* migrate_set_parameter() interpolates string parameter @value as a
JSON number. Change it to long long. This requires changing
migrate_check_parameter() similarly.
* migrate_set_capability() interpolates string parameter @value as a
JSON boolean. Change it to bool.
* deprecated_set_speed() interpolates string parameter @value as a
JSON number. Change it to long long.
Bonus: gets rid of non-literal format strings. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-21-armbru@redhat.com>
Leaving interpolation into JSON to qmp() is more robust than building
QMP input manually, as explained in the recent commit "tests: Clean up
string interpolation into QMP input (simple cases)".
migrate() interpolates members into a JSON object. Change it to take
its extra QMP arguments as arguments for qdict_from_jsonf_nofail()
instead of a string containing JSON members.
Bonus: gets rid of a non-literal format string. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-20-armbru@redhat.com>
Leaving interpolation into JSON to qmp() is more robust than building
QMP input manually, as explained in the recent commit "tests: Clean up
string interpolation into QMP input (simple cases)".
migrate_recover() builds QMP input manually because wait_command()
can't interpolate. Well, it can since the previous commit. Simplify
accordingly.
Bonus: gets rid of a non-literal format string. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-19-armbru@redhat.com>
wait_command() passes its argument @command to qtest_qmp_send().
Falls apart if @command contain '%'. Two ways to disarm this trap:
suppress interpretation of '%' by passing @command as argument to
format string "%s", or fix it by having wait_command() take the
variable arguments to go with @command. Do the latter.
This is another step towards compile-time format string checking
without triggering -Wformat-nonliteral.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-18-armbru@redhat.com>
Commit b21373d071 copied wait_command() from tests/migration-test.c
to tests/tpm-util.c. Replace both copies by new libqtest helper
qtest_qmp_receive_success(). Also use it to simplify
qtest_qmp_device_del().
Bonus: gets rid of a non-literal format string. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-17-armbru@redhat.com>
All callers of wait_command() are only interested in the success
response's "return" member. Lift its extraction into wait_command().
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-16-armbru@redhat.com>
When you build QMP input manually like this
cmd = g_strdup_printf("{ 'execute': 'migrate',"
"'arguments': { 'uri': '%s' } }",
uri);
rsp = qmp(cmd);
g_free(cmd);
you're responsible for escaping the interpolated values for JSON. Not
done here, and therefore works only for sufficiently nice @uri. For
instance, if @uri contained a single "'", qobject_from_vjsonf_nofail()
would abort. A sufficiently nasty @uri could even inject unwanted
members into the arguments object.
Leaving interpolation into JSON to qmp() is more robust:
rsp = qmp("{ 'execute': 'migrate', 'arguments': { 'uri': %s } }", uri);
It's also more concise.
Clean up the simple cases where we interpolate exactly a JSON value.
Bonus: gets rid of non-literal format strings. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-13-armbru@redhat.com>
qtest_qmp_discard_response(...) is shorthand for
qobject_unref(qtest_qmp(...), except it's not actually shorter.
Moreover, the presence of these functions encourage sloppy testing.
Remove them from libqtest. Add them as macros to the tests that use
them, with a TODO comment asking for cleanup.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-5-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The only possible change of last_byte is when it reaches the edge.
Setting it every time might let last_byte contain an invalid data when
memory corruption is detected, then the check of the next byte will be
incorrect. For example, a single page corruption at address 0x14ad000
will also lead to a "fake" corruption at 0x14ae000:
Memory content inconsistency at 14ad000 first_byte = 44 last_byte = 44 current = ef hit_edge = 0
Memory content inconsistency at 14ae000 first_byte = 44 last_byte = ef current = 44 hit_edge = 0
After the patch, it'll only report the corrputed page:
Memory content inconsistency at 14ad000 first_byte = 44 last_byte = 44 current = ef hit_edge = 0
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180723123305.24792-4-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We dumped something when network failure happens. We should avoid those
messages to be dumped when running the tests:
$ ./tests/migration-test -p /x86_64/migration/postcopy/recovery
/x86_64/migration/postcopy/recovery: qemu-system-x86_64: check_section_footer: Read section footer failed: -5
qemu-system-x86_64: Detected IO failure for postcopy. Migration paused.
qemu-system-x86_64: Detected IO failure for postcopy. Migration paused.
OK
After the patch:
$ ./tests/migration-test -p /x86_64/migration/postcopy/recovery
/x86_64/migration/postcopy/recovery: OK
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-11-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Test the postcopy recovery procedure by emulating a network failure
using migrate-pause command.
Tested-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-10-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It's generalized from wait_for_migration_complete() to allow us to wait
for any migration status besides failure.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-9-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce helpers to query migration states and use it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-8-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
For example, we can pass in '"resume": true' to resume a migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-7-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Separate the old postcopy UNIX socket test into three steps, provide a
helper for each step. With these helpers, we can do more compliated
tests like postcopy recovery, while keep the codes shared.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-6-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix up merge with 2e295789 / Skip tests for ppc tcg
PPC tcg seems to be failing migration tests quite regularly;
we believe this is TCG bugs in dirty bit updating; it's
not clear why PPC fails more but lets skip for the moment.
$ ./tests/migration-test
/ppc64/migration/deprecated: OK
/ppc64/migration/bad_dest: Skipping test: kvm_hv not available OK
/ppc64/migration/postcopy/unix: Skipping test: kvm_hv not available OK
/ppc64/migration/precopy/unix: Skipping test: kvm_hv not available OK
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 20180706143105.93472-1-dgilbert@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No need to write it to a file. Just need a proper firmware O:-)
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch just requests blocktime calculation,
and check it in case when UFFD_FEATURE_THREAD_ID feature is set
on the host.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-6-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In 2c9bb29703 I added a migration test that purposely fails;
unfortunately it prints a copy of the failure message to stderr
which makes the output a bit messy.
Hide stderr for that test.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180306173042.24572-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Check the source survives.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180212160340.15333-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
The boot block used in the migration test is currently only
shipped as a hex (with the source in the git commit message of ea0c6d62),
change this to actually include the source.
A script is added to rebuild the header but the expectation is that
the generated hex is shipped as well as the .s, so that
there's no requirement to have just the right assembler etc.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180213100606.5379-1-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Removed blank line at end of script
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Also reorder code to not sleep when event already happened.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This way, it is like the rest of commands
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We add deprecated commands on a new test, so we don't have to add it
on normal tests.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We move to use migration_set_parameter() for everything.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This reverts commits
ca6011c migration: add postcopy total blocktime into query-migrate
5f32dc8 migration: add blocktime calculation into migration-test
2f7dae9 migration: postcopy_blocktime documentation
3be98be migration: calculate vCPU blocktime on dst side
01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState
31bf06a migration: introduce postcopy-blocktime capability
as they don't build on ppc32 due to trying to do atomic accesses
on types that are larger than the host pointer type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch just requests blocktime calculation,
and check it in case when UFFD_FEATURE_THREAD_ID feature is set
on the host.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As we have two guests running, just pass always who we want to send a
message to. Once there, refactor return_or_event() into wait_command.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Instead of repeating the code, we are going to bo more tests on this file
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
