proxy_init() does not check the return value of connect_namedsocket(),
fix this by rearranging code a little bit.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If connect() in connect_namedsocket() return false, the sockfd will leak.
Plug it.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
When using mapped mode in 9pfs, readdir implementation
should not return file type in d_type from the host
readdir, instead, it should use the type stored in
the extended attributes. Since d_type is optional
and reading ext attrs for every readdir is expensive,
it should be sufficient to just set d_type to DT_UNKNOWN,
so guest will know to look it up separately.
This is a -stable material.
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
With security_model=mapped-xattr, we encode the uid,gid and other file
attributes as extended attributes of the file. We save them under
user.virtfs.* namespace.
Use little-endian encoding for on-disk values. This enables us to export
the same directory from both little-endian and big-endian hosts.
NOTE: This will break big-endian host that have virtFS exports
using security model mapped-xattr. They will have to use external tools
to convert the xattr to little-endian format.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation. Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just hardcode them in the callers
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When path is truncated by PATH_MAX limitation, it causes QEMU to access
incorrect file. So use original full path instead of PATH_MAX within
9pfs (need check/process ENOMEM for related memory allocation).
The related test:
- Environments (for qemu-devel):
- Host is under fedora17 desktop with ext4fs:
qemu-system-x86_64 -hda test.img -m 1024 \
-net nic,vlan=4,model=virtio,macaddr=00:16:35:AF:94:04 \
-net tap,vlan=4,ifname=tap4,script=no,downscript=no \
-device virtio-9p-pci,id=fs0,fsdev=fsdev0,mount_tag=hostshare \
-fsdev local,security_model=passthrough,id=fsdev0,\
path=/upstream/vm/data/share/1234567890abcdefghijklmnopqrstuvwxyz\
ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890acdefghijklmnopqrstuvwxyz\
ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890/111111111111111111111111111\
1111111111111111111111111111111111111111111111111111222222222222\
2222222222222222222222222222222222222222222222222222222222222222\
2222222222222222222222222222222222233333333333333333333333333333\
3333333333333333333333333333333333
- Guest is ubuntu12 server with 9pfs.
mount -t 9p -o trans=virtio,version=9p2000.L hostshare /share
- Limitations:
full path limitation is PATH_MAX (4096B include nul) under Linux.
file/dir node name maximized length is 256 (include nul) under ext4.
- Special test:
Under host, modify the file: "/upstream/vm/data/share/1234567890abcdefg\
hijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890acdefghijklmno\
pqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890/111111111111111111111\
111111111111111111111111111111111111111111111111111111111122222222222\
222222222222222222222222222222222222222222222222222222222222222222222\
222222222222222222222222222222233333333333333333333333333333333333333\
3333333333333333333333333/4444444444444444444444444444444444444444444\
444444444444444444444444444444444444444444444444444444444444444444444\
444444444444444444444444444444444444444444444444444444444444444444444\
444444444444444444444444444444444444444/55555555555555555555555555555\
555555555555555555555555555555555555555555555555555555555555555555555\
555555555555555555555555555555555555555555555555555555555555555555555\
555555555555555555555555555555555555555555555555555555555555555555555\
55555555/666666666666666666666666666666666666666666666666666666666666\
666666666666666666666666666666666666666666666666666666666666666666666\
666666666666666666666666666666666666666666666666666666666666666666666\
666666666666666666666/77777777777777777777777777777777777777777777777\
777777777777777777777777777777777777777777777777777777777777777777777\
777777777777777777777777777777777777777777777777777777777777777777777\
77777777777777777777777777777777777777777777777777777777777/888888888\
888888888888888888888888888888888888888888888888888888888888888888888\
888888888888888888888888888888888888888888888888888888888888888888888\
888888888888888888888888888888888888888888888888888888888888888888888\
888888888/99999999999999999999999999999999999999999999999999999999999\
999999999999999999999999999999999999999999999999999999999999999999999\
999999999999999999999999999999999999999999999999999999999999999999999\
99999999999999999999999999999999999999999/000000000000000000000000000\
000000000000000000000000000000000000000000000000000000000000000000000\
000000000000000000000000000000000000000000000000000000000000000000000\
000000000000000000000000000000000000000000000000/aaaaaaaaaaaaaaaaaaaa\
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbb\
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb\
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb\
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ccccccccc\
ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc\
ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc\
ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc\
cccccccccc/dddddddddddddddddddddddddddddddddddddddddddddddddddddddddd\
ddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd\
ddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd\
dddddddddddddddddddddd/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee\
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee\
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee\
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee/fffffffffffffff\
fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff\
fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff\
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffff/gggggggggg\
ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg\
ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg\
ggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg\
ggggggggggggggggggggggg/iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii\
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii\
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii\
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii/jjjjjjjjjjjjj\
jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj\
jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj/ppppppppppppppppppppp\
ppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppp\
ppppppppppppppppppppppppppppppppppppppp/test1234567890file.log"
(need enter dir firstly, then modify file, or can not open it).
Under guest, still allow modify "test1234567890file.log" (will generate
"test123456" file with contents).
After apply this patch, can not open "test1234567890file.log" under guest
(permission denied).
- Common test:
All are still OK after apply this path.
"mkdir -p", "create/open file/dir", "modify file/dir", "rm file/dir".
change various mount point paths under host and/or guest.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
'ctx->fs_root' + 'path'/'fullname.data' may be larger than PATH_MAX, so
need use snprintf() instead of sprintf() just like another area have done
in 9pfs. This could possibly result in the truncation of pathname, which we
address in the follow up patch.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
When "goto err_out", 'v9fs_string' already was allocated, so still need
free 'v9fs_string' before return.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Currently we fail getattr request altogether if we can't read
P9_STATS_GEN for some reason. It breaks valid use cases:
E.g let's assume we have non-readable directory with execution bit set
on host and we export it to client over 9p On host we can chdir into
directory, but not open directory on read and list content.
But if client will try to call getattr (as part of chdir(2)) for the
directory it will fail with -EACCES. It happens because we try to open
the directory on read to call ioctl(FS_IOC_GETVERSION), it fails and we
return the error code to client.
It's excessive. The solution is to make P9_STATS_GEN failure non-fatal
for getattr request. Just don't set P9_STATS_GEN flag in result mask on
failure.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Currently we silently ignore getversion requests for anything except
file or directory. Let's instead return ENOTTY error to indicate that
getversion is not supported. It makes implementation consistent on
all not-supported cases.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
All get_st_gen() implementations except handle_ioc_getversion() have
guard for undefined FS_IOC_GETVERSION. Let's add it there too.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
v9fs_co_st_gen() expects to see error code in errno, not in return code.
Let's fix this.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
If there is no operation driver for the xattr type the
functions return '-1' and set errno to '-EOPNOTSUPP'.
When the calling code sets 'ret = -errno' this turns
into a large positive number.
In Linux 3.11, the kernel has switched to using 9p
version 9p2000.L, instead of 9p2000.u, which enables
support for xattr operations. This on its own is harmless,
but for another change which makes it request the xattr
with a name 'security.capability'.
The result is that the guest sees a succesful return
of 95 bytes of data, instead of a failure with errno
set to 95. Since the kernel expects a maximum of 20
bytes for an xattr return this gets translated to the
unexpected errno ERANGE.
This all means that when running a binary off a 9p fs
in 3.11 kernels you get a fun result of:
# ./date
sh: ./date: Numerical result out of range
The only workaround is to pass 'version=9p2000.u' when
mounting the 9p fs in the guest, to disable all use of
xattrs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In virtio_9p_device_init() there are 6x goto out that will lead to
v9fs_path_free() attempting to free unitialized path.data field.
Easiest way to trigger is: qemu-system-x86_64 -device virtio-9p-pci
Fix this by moving v9fs_path_init() before any goto out.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375315187-16534-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The leak was reported by cppcheck.
Function proxy_init also calls g_free for ctx->fs_root.
Avoid reuse of this memory by setting ctx->fs_root to NULL.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix few more memory leaks in virtio-9p-device.c detected using valgrind.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Message-id: 1372929678-14341-1-git-send-email-mohan@in.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
9P optionally uses the FS_IOC_GETVERSION ioctl to get information about
a file's version (sometimes called generation number).
The code checks for supported filesystems at mount time, but some paths
may come from other mounted filesystems.
Change it to treat unsupported paths the same as unsupported
filesystems, returning 0 in both cases.
Note: ENOTTY is the error code for an unsupported ioctl.
This fix allows booting a linux kernel with the same / filesystem as the
host; otherwise the boot fails when mounting devtmpfs.
Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
9p server should never follow a symlink. So use O_NOFOLLOW with all open
syscall
Tested-by: "M. Mohan Kumar" <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
With mapped security models like mapped-xattr and mapped-file, we save the
symlink target as file contents. Now if we ever expose a normal directory
with mapped security model and find real symlinks in export path, never
follow them and return proper error.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
When guest tries to chmod a block or char device file over 9pfs,
the qemu process segfaults. With 9p2000.u protocol we use wstat to
change mode bits and client don't send extension information for
chmod. We need to check for size field to check whether extension
info is present or not.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This remove the function pointer in VirtIODevice, and use only
VirtioDeviceClass function pointer.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-9p-pci is switched to the new API, we can use QOM casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove old init function as it is no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-9p-pci is modified for the new API. The device
virtio-9p-pci extends virtio-pci. It creates and connects a
virtio-9p-device during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-9p-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models. Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use the clunk request to do the actual xattr operation. So don't
ignore the error value for fid clunk.
Security model "none" don't support posix acl. Without this patch
guest won't get EOPNOTSUPP error on setxattr("system.posix_acl_access")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note: the allocation in virtio_9p_init() is still leaked. To be fixed
in a followup commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Once upon a time, it was decided that qemu_malloc(0) should abort.
Switching to glib retired that bright idea. Some code that was added
to cope with it (e.g. in commits 702ef63, b76b6e9) is still around.
Bury it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This further optimizes MSIX handling in virtio-pci.
Also included is pci cleanup by Paolo, and pci device
assignment fix by Alex.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJQ7ZaiAAoJECgfDbjSjVRpFhcIAJkY4VQ3i7TLnLsnEDOR+FrP
66YLEDwCSiKZ/UW7WERGN3p3tm0hAXLhPoHFqMGRPPV9pdcXI+Eb8v+u0IHVlt+7
DsQ9TIemZkpSMuUJjQbu/RF8k9JV8+X7M6CKnWahq68p0UD/vDX+OgCiGKO/l/zY
tENJhwD6M1MMzbxyzd4nCnkf3CPrHFvpPt2VAqQnkCw3wLAtR34SucBjr/dXcjuT
arPiV8dNmXHTosdKvcodAWA+0YLLE7Bhz0nLK6eTt5L/UsfdbRN8q9Xdhd5nJjji
DjKBJBfwdG5n3r96g7dlb/XdHuQjbFBq3uLmc8H2OdWOrk5PyqeoUA5fdBQxkb8=
=vKSI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,virtio
This further optimizes MSIX handling in virtio-pci.
Also included is pci cleanup by Paolo, and pci device
assignment fix by Alex.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* mst/tags/for_anthony:
pci-assign: Enable MSIX on device to match guest
pci: use constants for devices under the 1B36 device ID, document them
ivshmem: use symbolic constant for PCI ID, add to pci-ids.txt
virtio-9p: use symbolic constant, add to pci-ids.txt
reorganize pci-ids.txt
docs: move pci-ids.txt to docs/specs/
vhost: backend masking support
vhost: set started flag while start is in progress
virtio-net: set/clear vhost_started in reverse order
virtio: backend virtqueue notifier masking
virtio-pci: cache msix messages
kvm: add stub for update msi route
msix: add api to access msix message
virtio: don't waste irqfds on control vqs
Since 39bffca203 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.
Fix the documented QOM examples:
sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h
Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c
This also avoids to piggy-back these changes onto real functional
changes or other refactorings.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
