Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
{} +
Some of the lines were manually edited to reduce the line length to below
80 charecters.
The #include lines were manually updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost registers a MemoryListener where it adds and removes references
to MemoryRegions as the MemoryRegionSections pass through. The
region_add callback is invoked for each existing section when the
MemoryListener is registered, but unregistering the MemoryListener
performs no reciprocal region_del callback. It's therefore the
owner of the MemoryListener's responsibility to cleanup any persistent
changes, such as these memory references, after unregistering.
The consequence of this bug is that if we have both a vhost device
and a vfio device, the vhost device will reference any mmap'd MMIO of
the vfio device via this MemoryListener. If the vhost device is then
removed, those references remain outstanding. If we then attempt to
remove the vfio device, it never gets finalized and the only way to
release the kernel file descriptors is to terminate the QEMU process.
Fixes: dfde4e6e1a ("memory: add ref/unref calls")
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org # v1.6.0+
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I used the clang-tidy qemu-round check to generate the fix:
https://github.com/elmarco/clang-tools-extra
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, vhost-user does not implement any means for notifying the
backend about guest endianess. This commit introduces a new message
called VHOST_USER_SET_VRING_ENDIAN which is analogous to the ioctl()
called VHOST_SET_VRING_ENDIAN used for kernel vhost backends. Such
message is necessary for backends supporting legacy (pre-1.0) virtio
devices running in big-endian guests.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Mike Cui <cui@nutanix.com>
vhost exists a call for g_file_get_contents, but not call g_free.
Signed-off-by: Peng Hao<peng.hao2@zte.com.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Unlike other object_property_add_link() occurrences in virtio devices,
virtio-crypto checks the "in use" state of the linked backend object in
addition to qdev_prop_allow_set_link_before_realize. To convert it
without needing to specialize DEFINE_PROP_LINK which always uses the
qdev callback, move the "in use" check to device realize time.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-10-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
link's check callback is supposed to verify/permit setting it,
however currently nothing restricts it from misusing it
and modifying target object from within.
Make sure that readonly semantics are checked by compiler
to prevent callback's misuse.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-2-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the backend sends a request just before closing the socket,
the aio dispatcher might schedule its reading after the vhost
device has been cleaned, leading to a NULL pointer dereference
in slave_read();
vhost_user_cleanup() already closes the socket but it is not
enough, the handler has to be unregistered.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes a crash that happens when vhost-user iommu
support is enabled and vhost-user socket is closed.
When it happens, if an IOTLB invalidation notification is sent
by the IOMMU, vhost_ops's NULL pointer is dereferenced.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Old kvm.ko versions only supported a tiny number of ioeventfds so
virtio-pci avoids ioeventfds when kvm_has_many_ioeventfds() returns 0.
Do not check kvm_has_many_ioeventfds() when KVM is disabled since it
always returns 0. Since commit 8c56c1a592
("memory: emulate ioeventfd") it has been possible to use ioeventfds in
qtest or TCG mode.
This patch makes -device virtio-blk-pci,iothread=iothread0 work even
when KVM is disabled.
I have tested that virtio-blk-pci works under TCG both with and without
iothread.
This patch fixes qemu-iotests 068, which was accidentally merged early
despite the dependency on ioeventfd.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-7-stefanha@redhat.com
Message-id: 20170615163813.7255-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This commit introduces a vhost-user device for SCSI. This is based
on the existing vhost-scsi implementation, but done over vhost-user
instead. It also uses a chardev to connect to the backend. Unlike
vhost-scsi (today), VMs using vhost-user-scsi can be live migrated.
To use it, start Qemu with a command line equivalent to:
qemu-system-x86_64 \
-chardev socket,id=vus0,path=/tmp/vus.sock \
-device vhost-user-scsi-pci,chardev=vus0,bus=pci.0,addr=...
A separate commit presents a sample application linked with libiscsi to
provide a backend for vhost-user-scsi.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-4-git-send-email-felipe@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>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=5eL6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/chrfe-pull-request' into staging
# gpg: Signature made Fri 02 Jun 2017 20:12:48 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/chrfe-pull-request:
char: move char devices to chardev/
char: make chr_fe_deinit() optionaly delete backend
char: rename functions that are not part of fe
char: move CharBackend handling in char-fe unit
char: generalize qemu_chr_write_all()
be-hci: use backend functions
chardev: serial & parallel declaration to own headers
chardev: move headers to include/chardev
Remove/replace sysemu/char.h inclusion
char-win: close file handle except with console
char-win: rename hcom->file
char-win: rename win_chr_init/poll win_chr_serial_init/poll
char-win: remove WinChardev.len
char-win: simplify win_chr_read()
char: cast ARRAY_SIZE() as signed to silent warning on empty array
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch specifies and implements the master/slave communication
to support device IOTLB in slave.
The vhost_iotlb_msg structure introduced for kernel backends is
re-used, making the design close between the two backends.
An exception is the use of the secondary channel to enable the
slave to send IOTLB miss requests to the master.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Learn to give a socket to the slave to let him make requests to the
master.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will add more fields to the structure
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch reworks IOTLB messaging to prepare for vhost-user
device IOTLB support.
IOTLB messages handling is extracted from vhost-kernel backend,
so that only the messages transport remains backend specifics.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some backends might want to know when things went wrong.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This tracepoint can help diagnosing failures due to memory
fragmentation in the guest.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
process_message_reply() was recently updated to get full message
content instead of only its request field.
There is no need to copy all the struct content into the stack,
so just pass its pointer as const.
Reviewed-by: Jens Freimann <jfreiman@redhat.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This files don't use any function from migration.h, so drop it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
According to section 2.1.2 of the virtio-1 specification:
"The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state that
a reset is needed. If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET,
the device MUST send a device configuration change notification to the
driver."
Commit "f5ed36635d8f virtio: stop virtqueue processing if device is broken"
introduced a virtio_error() call that just does that:
- internally mark the device as broken
- set the DEVICE_NEEDS_RESET bit in the status
- send a configuration change notification
Unfortunately, virtio_notify_vector(), called by virtio_notify_config(),
returns right away when the device is marked as broken and the notification
isn't sent in this case.
The spec doesn't say whether a broken device can send notifications
in other situations or not. But since the driver isn't supposed to do
anything but to reset the device, it makes sense to keep the check in
virtio_notify_config().
Marking the device as broken AFTER the configuration change notification was
sent is enough to fix the issue.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows us to remove lots of includes of migration/migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Qemu2.7~2.9 and vhost user for dpdk 17.02 release work together
to cause failures of new connection when negotiating to set MQ.
(one queue pair works well).
Because there exist some bugs in qemu code when introducing
VHOST_USER_PROTOCOL_F_REPLY_ACK to qemu. When vhost_user_set_mem_table
is invoked to deal with the vhost message VHOST_USER_SET_MEM_TABLE
for the second time, qemu indeed doesn't send the messge (The message
needs to be sent only once)but still will be waiting for dpdk's reply
ack, then, qemu is always freezing, while DPDK is always waiting for
next vhost message from qemu.
The patch aims to fix the bug, MQ can work well.
The same bug is found in function vhost_user_net_set_mtu, it is fixed
at the same time.
DPDK related patch is as following:
http://www.dpdk.org/dev/patchwork/patch/23955/
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Cc: qemu-stable@nongnu.org
Fixes: ca525ce561 ("vhost-user: Introduce a new protocol feature REPLY_ACK.")
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jens Freimann <jfreiman@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-----BEGIN PGP SIGNATURE-----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=EsZ5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170421' into staging
migration/next for 20170421
# gpg: Signature made Fri 21 Apr 2017 11:28:13 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20170421: (65 commits)
hmp: info migrate_parameters format tunes
hmp: info migrate_capability format tunes
migration: rename max_size to threshold_size
migration: set current_active_state once
virtio-rng: stop virtqueue while the CPU is stopped
migration: don't close a file descriptor while it can be in use
ram: Remove migration_bitmap_extend()
migration: Disable hotplug/unplug during migration
qdev: Move qdev_unplug() to qdev-monitor.c
qdev: Export qdev_hot_removed
qdev: qdev_hotplug is really a bool
migration: Remove MigrationState parameter from migration_is_idle()
ram: Use RAMBitmap type for coherence
ram: rename last_ram_offset() last_ram_pages()
ram: Use ramblock and page offset instead of absolute offset
ram: Change offset field in PageSearchStatus to page
ram: Remember last_page instead of last_offset
ram: Use page number instead of an address for the bitmap operations
ram: reorganize last_sent_block
ram: ram_discard_range() don't use the mis parameter
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we modify the virtio-rng virqueue while the
vmstate is already migrated we can have some
inconsistencies between the virtqueue state and
the memory content.
To avoid this, stop the virtqueue while the CPU
is stopped.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In this patch, IOMMUNotifier.{start|end} are introduced to store section
information for a specific notifier. When notification occurs, we not
only check the notification type (MAP|UNMAP), but also check whether the
notified iova range overlaps with the range of specific IOMMU notifier,
and skip those notifiers if not in the listened range.
When removing an region, we need to make sure we removed the correct
VFIOGuestIOMMU by checking the IOMMUNotifier.start address as well.
This patch is solving the problem that vfio-pci devices receive
duplicated UNMAP notification on x86 platform when vIOMMU is there. The
issue is that x86 IOMMU has a (0, 2^64-1) IOMMU region, which is
splitted by the (0xfee00000, 0xfeefffff) IRQ region. AFAIK
this (splitted IOMMU region) is only happening on x86.
This patch also helps vhost to leverage the new interface as well, so
that vhost won't get duplicated cache flushes. In that sense, it's an
slight performance improvement.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1491562755-23867-2-git-send-email-peterx@redhat.com>
[ehabkost: included extra vhost_iommu_region_del() change from Peter Xu]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We assumes the iommu_ops were attached to the root region of address
space. This may not be true for all kinds of IOMMU implementation and
especially after commit 3716d5902d ("pci: introduce a bus master
container"). So fix this by not assuming as->root has iommu_ops,
instead depending on the regions reported by memory listener through:
- register a memory listener to dma_as
- during region_add, if it's a region of IOMMU, register a specific
IOMMU notifier, and store all notifiers in a list.
- during region_del, compare and delete the IOMMU notifier from the list
This is also a must for making vhost device IOTLB works for all types
of IOMMUs. Note, since we register one notifier during each
.region_add, the IOTLB may be flushed more than one times, this is
suboptimal and could be optimized in the future.
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fixes: 3716d5902d ("pci: introduce a bus master container")
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Commit ad07cd6 ("virtio-scsi: always use dataplane path if ioeventfd is
active", 2016-10-30) and 9ffe337 ("virtio-blk: always use dataplane
path if ioeventfd is active", 2016-10-30) broke the virtio 1.0
indirect access registers.
The indirect access registers bypass the ioeventfd, so that virtio-blk
and virtio-scsi now repeatedly try to initialize dataplane instead of
triggering the guest->host EventNotifier. Detect the situation by
checking vq->handle_aio_output; if it is not NULL, trigger the
EventNotifier, which is how the device expects to get notifications
and in fact the only thread-safe manner to deliver them.
Fixes: ad07cd6
Fixes: 9ffe337
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
For one thing we shouldn't continue if an error happened, for the other
two steps failing can cause an abort() in error_setg because we reuse
the same errp blindly.
Add error handling checks to fix both issues.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Make Power Management State flag writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make several Link Control Register flags writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the virtio devices are PCI Express, make error-enabling flags
writable to respect the PCIe spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't reset proxy->vqs[].{num|desc[]|avail[]|used[]}. This means if
a driver enable the vq without setting vq address after reset. The old
addresses were leaked. Fixing this by resetting modern vq meta data
during device reset.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit
96a8821d21. Previous patch is a better
solution which does not require a strict order between virtio and IOMMU.
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We don't check the return value of address_space_cache_init(), this
may lead buggy driver use incorrect region caches. Instead of
triggering an assert, catch and warn this early in
virtio_init_region_cache().
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't destroy region cache during reset which can make the maps
of previous driver leaked to a buggy or malicious driver that don't
set vring address before starting to use the device. Fix this by
destroy the region cache during reset and validate it before trying to
see them.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To avoid access stale memory region cache after reset, this patch
check the existence of virtqueue pfn for all exported virtqueue access
helpers before trying to use them.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit c611c76417 ("virtio: add MemoryListener to cache ring
translations") registers a memory listener to dma_as. This may not
work when IOMMU is enabled: dma_as(bus_master_as) were initialized in
pcibus_machine_done() after virtio_realize(). This will cause a
segfault. Fixing this by using pci_device_iommu_address_space()
instead to make sure address space were initialized at this time.
With this fix, IOMMU device were required to be initialized before any
virtio-pci devices.
Fixes: c611c76417 ("virtio: add MemoryListener to cache ring translations")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 97cd965c07 ("virtio: use
VRingMemoryRegionCaches for avail and used rings") switched to a memory
region cache to avoid repeated map/unmap operations.
The virtio_load() process is a little tricky because vring addresses are
serialized in two separate places. VIRTIO 1.0 devices serialize desc
and then a subsection with used and avail. Legacy devices only
serialize desc.
Live migration of VIRTIO 1.0 devices fails on the destination host with:
VQ 0 size 0x80 < last_avail_idx 0x12f8 - used_idx 0x0
Failed to load virtio-blk:virtio
error while loading state for instance 0x0 of device '0000:00:04.0/virtio-blk'
This happens because the memory region cache is only initialized after
desc is loaded and not after the used and avail subsection is loaded.
If the guest chose memory addresses that don't match the legacy ring
layout then the wrong guest memory location is accessed.
Wait until all ring addresses are known before trying to initialize the
region cache. Also clarify the incomplete comment about VIRTIO-1 ring
address subsection.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Remember to invalidate the avail event field so the memory pages are
marked dirty.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Switching to vring caches exposed an existing bug in
virtio_queue_set_notification(): We can't access vring structures
if they have not been set up yet. This may happen, for example,
for virtio-blk devices with multiple queues: The code will try to
switch notifiers for every queue, but the guest may have only set up
a subset of them.
Fix this by guarding access to the vring memory by checking for
vring.desc. The first aio poll will iron out any remaining
inconsistencies for later-configured queues (buggy legacy drivers).
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vring has not been set up, there is nothing in the virtqueue.
virtio_queue_host_notifier_aio_poll calls virtio_queue_empty even in
this case; we have to filter it out just like virtio_queue_notify_aio_vq.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
For ARM virt machine, if we use virt-2.7 which will not create ITS node,
the virtio-net can not recieve interrupts so it can't get ip address
through dhcp.
This fixes commit 83d768b(virtio: set ISR on dataplane notifications).
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-net change is necessary because it uses virtqueue_fill
and virtqueue_flush instead of the more convenient virtqueue_push.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vring has not been set up, it is not necessary for vring_used_idx
to do anything (as is already the case when the caller is virtio_load).
This is harmless for now, but it will be a problem when the
MemoryRegionCache has not been set up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The cached translations are RCU-protected to allow efficient use
when processing virtqueues.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now, the cache is created on every virtqueue_pop. Later on,
direct descriptors will be able to reuse it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This makes little difference, but it makes the code change smaller
for the next patch that introduces MemoryRegionCache. This is
because map/unmap are similar to MemoryRegionCache init/destroy.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In virtio_queue_host_notifier_aio_poll, not all "!virtio_queue_empty()"
cases are making true progress.
Currently the offending one is virtio-scsi event queue, whose handler
does nothing if no event is pending. As a result aio_poll() will spin on
the "non-empty" VQ and take 100% host CPU.
Fix this by reporting actual progress from virtio queue aio handlers.
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost does not support RO protections on memory at the moment - adding
ROMs would mean that e.g. a buggy guest might change them in-memory - a
condition from which guest reset does not recover. Not nice.
We also definitely don't want to try logging writes into ROMs -
in particular guests set very high addresses for ROM BARs
so logging these writes would waste a lot of memory.
Maybe ROMs could be supported with the iotlb variant -
not sure, but there seems to be no good reason for virtio
to try to do DMA from ROM. So let's just skip ROM memory.
Suggested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
msix_init() reports errors with error_report(), which is wrong when
it's used in realize(). The same issue was fixed for msi_init() in
commit 1108b2f. In order to make the API change as small as possible,
leave the return value check to later patch.
For some devices(like e1000e, vmxnet3, nvme) who won't fail because of
msix_init's failure, suppress the error report by passing NULL error
object.
Bonus: add comment for msix_init.
CC: Jiri Pirko <jiri@resnulli.us>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Hannes Reinecke <hare@suse.de>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.
Add an errp parameter and a retcode return value to migrate_add_blocker.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged with recent 'Allow invtsc migration' change
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- rework of the zpci code, giving us proper multibus support
- introduction of the 2.9 machine
- fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fzmu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170120-v2' into staging
First set of s390x patches for 2.9:
- rework of the zpci code, giving us proper multibus support
- introduction of the 2.9 machine
- fixes and improvements
# gpg: Signature made Fri 20 Jan 2017 09:11:58 GMT
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170120-v2:
virtio-ccw: fix ring sizing
s390x/pci: merge msix init functions
s390x/pci: handle PCIBridge bus number
s390x/pci: use hashtable to look up zpci via fh
s390x/pci: PCI multibus bridge handling
s390x/pci: optimize calling s390_get_phb()
s390x/pci: change the device array to a list
s390x/pci: dynamically allocate iommu
s390x/pci: make S390PCIIOMMU inherit Object
s390x/kvm: use kvm_gsi_routing_enabled in flic
s390x: add compat machine for 2.9
s390x: remove double compat statement
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current code seems to assume ring size is
always decreased but this is not required by spec:
what spec says is just that size can not exceed
the maximum. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1484256243-1982-1-git-send-email-mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We allow vhost to clear VIRITO_F_IOMMU_PLATFORM which is wrong since
VIRTIO_F_IOMMU_PLATFORM is mandatory for security. Fixing this by
enforce it after vdc->get_features().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coverity reports that ARRAY_SIZE(elem->out_sg) (and all the others too)
is wrong because elem->out_sg is a pointer.
However, the check is not in the right place and the max_size argument
of virtqueue_map_iovec can be removed. The check on in_num/out_num
should be moved to qemu_get_virtqueue_element instead, before the call
to virtqueue_alloc_element.
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 3724650db0 ("virtio: introduce virtqueue_alloc_element")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
virtio core has code to revert queue number
to maximum on reset. Drop TODO to add that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patches implements Device IOTLB support for vhost kernel. This is
done through:
1) switch to use dma helpers when map/unmap vrings from vhost codes
2) introduce a set of VhostOps to:
- setting up device IOTLB request callback
- processing device IOTLB request
- processing device IOTLB invalidation
2) kernel support for Device IOTLB API:
- allow vhost-net to query the IOMMU IOTLB entry through eventfd
- enable the ability for qemu to update a specified mapping of vhost
- through ioctl.
- enable the ability to invalidate a specified range of iova for the
device IOTLB of vhost through ioctl. In x86/intel_iommu case this is
triggered through iommu memory region notifier from device IOTLB
invalidation descriptor processing routine.
With all the above, kernel vhost_net can co-operate with userspace
IOMMU. For vhost-user, the support could be easily done on top by
implementing the VhostOps.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While AioContext is in polling mode virtqueue notifications are not
necessary. Some device virtqueue handlers enable notifications. Make
sure they stay disabled to avoid unnecessary vmexits.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit aff8fd18f1.
Both virtio-net and virtio-crypto do not balance
virtio_queue_set_notification() enable and disable calls. This makes
the notifications_disabled counter unreliable and Doug Goldstein
reported the following assertion failure:
#3 0x00007ffff44d1c62 in __GI___assert_fail (
assertion=assertion@entry=0x555555ae8e8a "vq->notification_disabled > 0",
file=file@entry=0x555555ae89c0 "/home/doug/work/qemu/hw/virtio/virtio.c",
line=line@entry=215,
function=function@entry=0x555555ae9630 <__PRETTY_FUNCTION__.43707>
"virtio_queue_set_notification") at assert.c:101
#4 0x00005555557f25d6 in virtio_queue_set_notification (vq=0x55555666aa90,
enable=enable@entry=1) at /home/doug/work/qemu/hw/virtio/virtio.c:215
#5 0x00005555557dc311 in virtio_net_has_buffers (q=<optimized out>,
q=<optimized out>, bufsize=102)
at /home/doug/work/qemu/hw/net/virtio-net.c:1008
#6 virtio_net_receive (nc=<optimized out>, buf=0x555557386b88 "", size=102)
at /home/doug/work/qemu/hw/net/virtio-net.c:1148
#7 0x00005555559cad33 in nc_sendv_compat (flags=<optimized out>, iovcnt=1,
iov=0x7fffead746d0, nc=0x55555788b340) at net/net.c:705
#8 qemu_deliver_packet_iov (sender=<optimized out>, flags=<optimized out>,
iov=0x7fffead746d0, iovcnt=1, opaque=0x55555788b340) at net/net.c:732
#9 0x00005555559cd929 in qemu_net_queue_deliver (size=<optimized out>,
data=<optimized out>, flags=<optimized out>, sender=<optimized out>,
queue=0x55555788b550) at net/queue.c:164
#10 qemu_net_queue_flush (queue=0x55555788b550) at net/queue.c:261
This patch is safe to revert since it's just an optimization for
virtqueue polling. The next patch will improve the situation again
without resorting to nesting.
Reported-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-net-pci does not enable ioeventfd for historical reasons (and
nobody ever checked whether it should be revisited). Note that other
backends do enable ioeventfd for virtio-net.
However, it has a major effect on performance. On Windows, throughput is
_multiplied_ by 2 or 3 on TCP_STREAM (on small packets it is "only" a 30%
improvement) and a little less so on TCP_MAERTS albeit still very much
statistically significant. Latency also has a single digit improvement.
This is not visible when using vhost, which forces ioeventfd=on, but it
is substantial without vhost. In addition, also on Windows and with the
RHEL 7.3 kernel, APICv seems to slow down virtio-net performance a bit,
but the penalty with this patch goes from -25% to -7%.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove the useless is_external argument. Since the iohandler
AioContext is never used for block devices, aio_disable_external
is never called on it. This lets us remove stubs/iohandler.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements VHOST_USER_PROTOCOL_F_NET_MTU
protocol feature and VHOST_USER_NET_SET_MTU request so
that the backend gets notified of the user defined host
MTU.
If backend supports VHOST_USER_PROTOCOL_F_REPLY_ACK,
QEMU assumes MTU is valid if success is returned.
Vhost-net driver sends this request through a new
vhost_net_set_mtu vhost_ops entry.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Aaron Conole <aconole@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add procedure for fast drop of queued packets, acting like
pop and push without mapping the buffers into memory.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make virtio queue suitable for push operation from qemu
after vhost was stopped.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bring virtio queue to correct internal state for host-to-guest
operations when vhost is temporary stopped.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A broken guest can specify physical addresses that correspond
to any memory region, but it shouldn't be able to change ROM.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Correct recalculation of vq->inuse after migration for the corner case
where the avail_idx has already wrapped but used_idx not yet.
Also change the type of the VirtQueue.inuse to unsigned int. This is
done to be consistent with other members representing sizes (VRing.num),
and because C99 guarantees max ring size < UINT_MAX but does not
guarantee max ring size < INT_MAX.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: bccdef6b ("virtio: recalculate vq->inuse after migration")
CC: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Common practice with sensitive information (key material, passwords,
etc). Prevents sensitive information from being exposed by accident later in
coredumps, memory disclosure bugs when heap memory is reused, etc.
Sensitive information is sometimes also held in mlocked pages to prevent
it being swapped to disk but that's not being done here.
Let's zeroize the memory of CryptoDevBackendSymOpInfo structure pointed
for key material security.
[Thanks to Stefan for help with crafting the commit message]
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After resolving the relationship with cryptodev backend,
the virtio crypto device supports hotplug now.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the check condition for cryptodev device in order
to avoid one cryptodev device is used by multiple
virtio crypto devices.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We must assure each virtio crypto pci device has
an vaild cryptodev backend object.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ready flag should be set by the children of
cryptodev backend interface. Warp the setter/getter
functions for it.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This property is used to Tag the cryptodev backend
is used by virtio-crypto or not. Making cryptodev
can't be hot unplugged when it's in use. Cleanup
resources when cryptodev is finalized.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In some modes of cipher algorithms, the length of destination data
maybe larger then source data, such as ciphertext stealing (CTS).
For symmetric algorithms, the length of ciphertext is definitly
equal to the plaintext for each crypto operation. So we should
use the src_len instead of dst_len avoid to pass the incorrect
cryptographical results to the frontend driver.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches enable the Address Translation Service support for virtio
pci devices. This is needed for a guest visible Device IOTLB
implementation and will be required by vhost device IOTLB API
implementation for intel IOMMU.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, all virtio devices bypass IOMMU completely. This is because
address_space_memory is assumed and used during DMA emulation. This
patch converts the virtio core API to use DMA API. This idea is
- introducing a new transport specific helper to query the dma address
space. (only pci version is implemented).
- query and use this address space during virtio device guest memory
accessing when iommu platform (VIRTIO_F_IOMMU_PLATFORM) was enabled
for this device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Because the 'size_t' type is 4 bytes in 32-bit platform, which
is the same with 'int'. It's easy to make 'max_len' to zero when
integer overflow and then cause heap overflow if 'max_len' is zero.
Using uint_64 instead of size_t to avoid the integer overflow.
Cc: qemu-stable@nongnu.org
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYVFkHAAoJECgfDbjSjVRpdc0H/1JMgQn0/J6vjKfeRY7720y8
/Bihf4gjKN2bPtu6pTGY1KQBvK76ShyvZZBFCa5bf8a4V9HP4BgSQ8mQ7ZUURzJJ
OslYbSzK1R2LiWJ40e9xdFOoKWKB3lK1lBF/Xb8QPZPoJ0D50Fo2xpymt4hZFdkF
oSnXxHmYoKMsMmmqJZd3aaqyffFLYGmcm1dbJOxninwu/nBzOBY2SQmmaaacSoGn
3D5988i6OcD1qbavfk4rNCQV4avJA+H7c/FmXH3WarPE8M9/jgnAaUDdknFicUA8
hGwMsLrO/7sMnMYtSQIxWg743LhrAm93HCr2u/TgLzhYbPydmLCpup5eAWj+jvo=
=nN2D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, pc: fixes
Here are some bugfixes that didn't make 2.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 16 Dec 2016 21:13:43 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: avoid using guest_notifier_mask in vhost-user mode
pci: fix error message for express slots
i386: amd_iommu: fix MMIO register count and access
tests/vhost-user-bridge: use contrib/libvhost-user
contrib: add libvhost-user
tests/vhost-user-bridge: do not accept more than one connection
tests/vhost-user-bridge: indicate peer disconnected
tests/vhost-user-bridge: remove unnecessary dispatcher_remove
tests/vhost-user-bridge: remove false comment
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a performance optimization to eliminate vmexits during polling.
It also avoids spurious ioeventfd processing after polling ends.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-12-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Polling should disable virtqueue notifications but that requires nested
virtio_queue_set_notification() calls. Turn vq->notification into a
counter so it is possible to do nesting.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an AioContext poll handler to detect new virtqueue buffers without
waiting for a guest->host notification.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new AioPollFn io_poll() argument to aio_set_fd_handler() and
aio_set_event_handler() is used in the next patch.
Keep this code change separate due to the number of files it touches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Because guest mask notifier cannot be used in vhost-user mode, a boolean
flag "use_guest_notifier_mask" was added in commit 5669655aaf to disable
the use of guest mask notifier under virtio-pci. However this flag wasn't
checked in other virtio devices, such as virtio-mmio. In our tests, it
caused assertion error under "vhost-user + virtio-mmio". This patch
addresses this problem by adding a check before guest_notifier_mask is
called.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes a cross-version migration regression introduced
by commit d1b4259f ("virtio-bus: Plug devices after features are
negotiated").
The problem is encountered when host's vhost backend does not support
VIRTIO_F_VERSION_1, and migration is initiated from a v2.7 or prior
machine with virtio-pci modern capabilities enabled to a v2.8 machine.
In this case, modern capabilities get exposed to the guest by the source,
whereas the target will detect version 1 is not supported so will only
expose legacy capabilities.
The problem is fixed by introducing a new "x-ignore-backend-features"
property, which is set in v2.7 and prior compatibility modes. Doing this,
v2.7 machine keeps its broken behaviour (enabling modern while version
is not supported), and newer machines will behave correctly.
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-id: 20161214163035.3297-1-maxime.coquelin@redhat.com
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Though crypto_cfg.reserve is an unused field, let me
initialize the structure in order to make coverity happy.
*** CID 1365923: Uninitialized variables (UNINIT)
/hw/virtio/virtio-crypto.c: 851 in virtio_crypto_get_config()
845 stl_le_p(&crypto_cfg.mac_algo_h, c->conf.mac_algo_h);
846 stl_le_p(&crypto_cfg.aead_algo, c->conf.aead_algo);
847 stl_le_p(&crypto_cfg.max_cipher_key_len, c->conf.max_cipher_key_len);
848 stl_le_p(&crypto_cfg.max_auth_key_len, c->conf.max_auth_key_len);
849 stq_le_p(&crypto_cfg.max_size, c->conf.max_size);
850
>>> CID 1365923: Uninitialized variables (UNINIT)
>>> Using uninitialized value "crypto_cfg". Field "crypto_cfg.reserve"
is uninitialized when calling "memcpy".
[Note: The source code implementation of the function
has been overridden by a builtin model.]
851 memcpy(config, &crypto_cfg, c->config_size);
852 }
853
Rported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dataplane has been omitting forever the step of setting ISR when
an interrupt is raised. This caused little breakage, because the
specification actually says that ISR may not be updated in MSI mode.
Some versions of the Windows drivers however didn't clear MSI mode
correctly, and proceeded using polling mode (using ISR, not the used
ring index!) for crashdump and hibernation. If it were just crashdump
and hibernation it would not be a big deal, but recent releases of
Windows do not really shut down, but rather log out and hibernate to
make the next startup faster. Hence, this manifested as a more serious
hang during shutdown with e.g. Windows 8.1 and virtio-win 1.8.0 RPMs.
Newer versions fixed this, while older versions do not use MSI at all.
The failure has always been there for virtio dataplane, but it became
visible after commits 9ffe337 ("virtio-blk: always use dataplane path
if ioeventfd is active", 2016-10-30) and ad07cd6 ("virtio-scsi: always
use dataplane path if ioeventfd is active", 2016-10-30) made virtio-blk
and virtio-scsi always use the dataplane code under KVM. The good news
therefore is that it was not a bug in the patches---they were doing
exactly what they were meant for, i.e. shake out remaining dataplane bugs.
The fix is not hard, so it's worth arranging for the broken drivers.
The virtio_should_notify+event_notifier_set pair that is common to
virtio-blk and virtio-scsi dataplane is replaced with a new public
function virtio_notify_irqfd that also sets ISR. The irqfd emulation
code now need not set ISR anymore, so virtio_irq is removed.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be needed once dataplane will be able to set it outside
the big QEMU lock.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the recent refactoring of virtio notifiers [1], more specifically
the patch ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to
start/stop ioeventfd") that uses virtio_bus_set_host_notifier [2]
by default, core virtio code requires 'ioeventfd_started' to be set
to true/false when the host notifiers are configured.
When vhost is stopped and started, however, there is a stop followed by
another start. Since ioeventfd_started was never set to true, the 'stop'
operation triggered by virtio_bus_set_host_notifier() will not result
in a call to virtio_pci_ioeventfd_assign(assign=false). This leaves
the memory regions with stale notifiers and results on the next start
triggering the following assertion:
kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
Aborted
This patch reintroduces (hopefully in a cleaner way) the concept
that was present with ioeventfd_disabled before the refactoring.
When ioeventfd_grabbed>0, ioeventfd_started tracks whether ioeventfd
should be enabled or not, but ioeventfd is actually not started at
all until vhost releases the host notifiers.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07748.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-10/msg07760.html
Reported-by: Felipe Franciosi <felipe@nutanix.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Fixes: ed08a2a0b ("virtio: use virtio_bus_set_host_notifier to start/stop ioeventfd")
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We must check for new virtqueue buffers after re-enabling notifications.
This prevents the race condition where the guest added buffers just
after we stopped popping the virtqueue but before we re-enabled
notifications.
I think the virtio-crypto code was based on virtio-net but this crucial
detail was missed. virtio-net does not have the race condition because
it processes the virtqueue one more time after re-enabling
notifications.
Cc: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
These are not used anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The legacy vring layout is not used anymore as we use the separate
mappings even for legacy devices.
This patch simply removes it.
This also fixes a bug with virtio 1 devices when the vring descriptor table
is mapped at a higher address than the used vring because the following
function may return an insanely great value:
hwaddr virtio_queue_get_ring_size(VirtIODevice *vdev, int n)
{
return vdev->vq[n].vring.used - vdev->vq[n].vring.desc +
virtio_queue_get_used_size(vdev, n);
}
and the mapping fails.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With virtio 1, the vring layout is split in 3 separate regions of
contiguous memory for the descriptor table, the available ring and the
used ring, as opposed with legacy virtio which uses a single region.
In case of memory re-mapping, the code ensures it doesn't affect the
vring mapping. This is done in vhost_verify_ring_mappings() which assumes
the device is legacy.
This patch changes vhost_verify_ring_mappings() to check the mappings of
each part of the vring separately.
This works for legacy mappings as well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 31190ed7 added a migration blocker in vhost_dev_init() to
check if memfd would succeed. It is better if this blocker first
checks if vhost backend requires shared log. This will avoid a
situation where a blocker is added inappropriately (e.g. shared
log allocation fails when vhost backend doesn't support it).
Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy features are those that transitional devices only
expose on the legacy interface.
Allow different ones per device class.
Cc: qemu-stable@nongnu.org # dependency for the next patch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently the virtio-crypto device hasn't supported
hotpluggable and live migration well. Let's tag it
as not hotpluggable and migration actively and reopen
them once we support them well.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function does not fully initialize the returned VirtQueueElement and should
be used only internally from the virtio module.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function undoes the effect of virtqueue_pop and doesn't do anything
destructive or irreversible so virtqueue_unpop is a more fitting name.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make crypto operations are executed asynchronously,
so that other QEMU threads and monitor couldn't
be blocked at the virtqueue handling context.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use an opaque point to the VirtIOCryptoReq which
can support different packets based on different
algorithms.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduces VirtIOCryptoReq structure to store
crypto request so that we can easily support
asynchronous crypto operation in the future.
At present, we only support cipher and algorithm
chaining.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Realize the symmetric algorithm control queue handler,
including plain cipher and chainning algorithms.
Currently the control queue is used to create and
close session for symmetric algorithm.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose the capacity of algorithms supported by
virtio crypto device to the frontend driver using
pci configuration space.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds virtio-crypto-pci, which is the pci proxy for the virtio
crypto device.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the virtio crypto realization, I'll
finish the core code in the following patches. The
thoughts came from virtio net realization.
For more information see:
http://qemu-project.org/Features/VirtioCrypto
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is only called from virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Of the three possible parameter combinations for
virtio_queue_set_host_notifier_fd_handler:
- assign=true/set_handler=true is only called from
virtio_device_start_ioeventfd
- assign=false/set_handler=false is called from
set_host_notifier_internal but it only does something when
reached from virtio_device_stop_ioeventfd_impl; otherwise
there is no EventNotifier set on qemu_get_aio_context().
- assign=true/set_handler=false is called from
set_host_notifier_internal, but it is not doing anything:
with the new start_ioeventfd and stop_ioeventfd methods,
there is never an EventNotifier set on qemu_get_aio_context()
at this point. This is enforced by the assertion in
virtio_bus_set_host_notifier.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ioeventfd_disabled was the only reason for the default
implementation of virtio_device_start_ioeventfd not to use
virtio_bus_set_host_notifier. This is now fixed, and the sole entry
point to set up ioeventfd can be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that there is not anymore a switch from the generic ioeventfd handler
to the dataplane handler, virtio_bus_set_host_notifier(assign=true) is
always called with !bus->ioeventfd_started, hence virtio_bus_stop_ioeventfd
does nothing in this case. Move the invocation to vhost.c, which is the
only place that needs it.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make virtio_device_start_ioeventfd_impl use the same logic as
dataplane to set up the host notifier. This removes the need
for the set_handler argument in set_host_notifier_internal.
This is a first step towards using virtio_bus_set_host_notifier
as the sole entry point to set up ioeventfds. At least now
the functions have the same interface, but they still differ
in that virtio_bus_set_host_notifier sets ioeventfd_disabled.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 872dd82c83.
virtio_add_queue_aio is unused.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be used to forbid iothread configuration when the
proxy does not allow using ioeventfd. To simplify the implementation,
change the direction of the ioeventfd_disabled callback too.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow customization of the start and stop of ioeventfd. This will
allow direct start of dataplane without passing through the default
ioeventfd handlers, which in turn allows using the dataplane logic
instead of virtio_add_queue_aio. It will also enable some code
simplification, because the sole entry point to ioeventfd setup
will be virtio_bus_set_host_notifier.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_started
and ioeventfd_set_started callback. The only difference is
in how virtio-ccw handles an error---it doesn't disable
ioeventfd forever anymore. It was the only backend to do
so, and if desired this behavior should be implemented in
virtio-bus.c.
Instead of ioeventfd_started, the ioeventfd_assign callback now
determines whether the virtio bus supports host notifiers.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_set_disabled
callback.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid "tricking" virtio-blk-dataplane into thinking that ioeventfd will be
available when it is not. This bug has always been there, but it will break
TCG+ioeventfd=on once the dataplane code will be always used when ioeventfd=on.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the load/save with a vmsd.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a vmsd pointer for VirtIO devices to use instead of the
load/save methods.
We'll eventually kill off the load/save methods.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In most cases the functions passed to VMSTATE_VIRTIO_DEVICE
only call the virtio_load and virtio_save wrappers. Some include some
pre- and post- massaging too. The massaging is better expressed
as such in the VMStateDescription.
Let us prepare for changing the semantic of the VMSTATE_VIRTIO_DEVICE
macro so that it is more similar to the other VMSTATE_*_DEVICE macros
in a sense that it is a field definition.
The preprocessor conditionals are going to be removed as soon as
every usage is converted to the new semantic.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
During device reset or similar situations a VirtQueueElement needs to be
freed without pushing it onto the used ring or rewinding the virtqueue.
Extract a new function to do this.
Later patches add virtio_detach_element() calls to existing device so
that scatter-gather lists are unmapped and vq->inuse goes back to zero
during device reset. Currently some devices don't bother and simply
call g_free(elem) which is not a clean way to throw away a
VirtQueueElement.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since there in wrapper around madvise(), the virtio-balloon
code is able to work without the precompiled directive, the
directive can be removed.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewd-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the bar index names are much similar to the bar memory regions,
distinguish them to improve the code readability.
Signed-off-by: Chen Fan <fan.chen@easystack.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The trace points for hw/virtio/virtio-balloon.c were mistakenly put
in the top level trace-events file, instead of util/trace-events in
commit 270ab88f7c
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Jun 16 09:39:57 2016 +0100
trace: split out trace events for hw/virtio/ directory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1473872624-23285-5-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop processing the vring if virtqueue_get_head() fetches an
out-of-bounds head index.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If the avail ring index is bogus virtqueue_num_heads() must return
-EINVAL.
The only caller is virtqueue_get_avail_bytes(). Return saying no bytes
are available when virtqueue_num_heads() fails.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Stop processing the vring if an avail ring index is invalid.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The virtio code uses int, unsigned int, and uint16_t for virtqueue
indices. The uint16_t is used for the low-level descriptor layout in
virtio_ring.h while code that isn't concerned with descriptor layout can
use unsigned int.
Use of int is problematic because it can result in signed/unsigned
comparison and incompatible int*/unsigned int* pointer types.
Make the virtqueue_get_avail_bytes() 'i' variable unsigned int. This
eliminates the need to introduce casts and modify code further in the
patches that follow.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If the vring is invalid, tell the caller no bytes are available and mark
the device broken.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Errors can occur during virtqueue_pop(), especially in
virtqueue_map_desc(). In order to handle this we must unmap iov[]
before returning NULL. The caller will consider the virtqueue empty and
the virtio_error() call will have marked the device broken.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Send a subsection if the vdev->broken flag is set. This allows live
migration of broken virtio devices.
The subsection is only sent if vdev->broken has been set. In most cases
the flag will be clear and no subsection will be sent.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
QEMU prints an error message and exits when the device enters an invalid
state. Terminating the process is heavy-handed. The guest may still be
able to function even if there is a bug in a virtio guest driver.
Moreover, exiting is a bug in nested virtualization where a nested guest
could DoS other nested guests by killing a pass-through virtio device.
I don't think this configuration is possible today but it is likely in
the future.
If the broken flag is set, do not process virtqueues or write back used
descriptors. The broken flag can be cleared again by resetting the
device.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Fix a single occurrence of a tab character in a file that otherwise uses
spaces for indentation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
virtio back end uses set of buffers to facilitate I/O operations.
If its size is too large, 'cpu_physical_memory_map' could return
a null address. This would result in a null dereference while
un-mapping descriptors. Add check to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently, devices are plugged before features are negotiated.
If the backend doesn't support VIRTIO_F_VERSION_1, the transport
needs to rewind some settings.
This is the case for CCW, for which a post_plugged callback had
been introduced, where max_rev field is just updated if
VIRTIO_F_VERSION_1 is not supported by the backend.
For PCI, implementing post_plugged would be much more
complicated, so it needs to know whether the backend supports
VIRTIO_F_VERSION_1 at plug time.
Currently, nothing is done for PCI. Modern capabilities get
exposed to the guest even if VIRTIO_F_VERSION_1 is not supported
by the backend, which confuses the guest.
This patch replaces existing post_plugged solution with an
approach that fits with both transports.
Features negotiation is performed before ->device_plugged() call.
A pre_plugged callback is introduced so that the transports can
set their supported features.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> [ccw]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Implement the new virtio sockets device for host<->guest communication
using the Sockets API. Most of the work is done in a vhost kernel
driver so that virtio-vsock can hook into the AF_VSOCK address family.
The QEMU vhost-vsock device handles configuration and live migration
while the rx/tx happens in the vhost_vsock.ko Linux kernel driver.
The vsock device must be given a CID (host-wide unique address):
# qemu -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 ...
For more information see:
http://qemu-project.org/Features/VirtioVsock
[Endianness fixes and virtio-ccw support by Claudio Imbrenda
<imbrenda@linux.vnet.ibm.com>]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[mst: rebase to master]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
!legacy && !modern is shorter than !(legacy || modern).
I also perfer this (less ()s) as a matter of taste.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to set vring call fd unconditionally even if guest driver does
not use MSIX for this vritqueue at all. This will cause lots of
unnecessary userspace access and other checks for drivers does not use
interrupt at all (e.g virtio-net pmd). So check and clean vring call
fd if guest does not use any vector for this virtqueue at
all.
Perf diffs (on rx) shows lots of cpus wasted on vhost_signal() were saved:
#
28.12% -27.82% [vhost] [k] vhost_signal
14.44% -1.69% [kernel.vmlinux] [k] copy_user_generic_string
7.05% +1.53% [kernel.vmlinux] [k] __free_page_frag
6.51% +5.53% [vhost] [k] vhost_get_vq_desc
...
Pktgen tests shows 15.8% improvement on rx pps and 6.5% on tx pps.
Before: RX 2.08Mpps TX 1.35Mpps
After: RX 2.41Mpps TX 1.44Mpps
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without presuming if we got there because of a user mistake or some
more subtle bug in the tooling, it really does not make sense to
implement a non-functional device.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The statistics virtqueue is not migrated properly because virtio-balloon
does not include s->stats_vq_elem in the migration stream.
After migration the statistics virtqueue hangs because the host never
completes the last element (s->stats_vq_elem is NULL on the destination
QEMU). Therefore the guest never submits new elements and the virtqueue
is hung.
Instead of changing the migration stream format in an incompatible way,
detect the migration case and rewind the virtqueue so the last element
can be completed.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtqueue_discard() requires a VirtQueueElement but virtio-balloon does
not migrate its in-use element. Introduce a new function that is
similar to virtqueue_discard() but doesn't require a VirtQueueElement.
This will allow virtio-balloon to access element again after migration
with the usual proviso that the guest may have modified the vring since
last time.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The one pending element is being freed but not discarded on device
reset, which causes svq->inuse to creep up, eventually hitting the
"Virtqueue size exceeded" error.
Properly discarding the element on device reset makes sure that its
buffers are unmapped and the inuse counter stays balanced.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vq->inuse must be zeroed upon device reset like most other virtqueue
fields.
In theory, virtio_reset() just needs assert(vq->inuse == 0) since
devices must clean up in-flight requests during reset (requests cannot
not be leaked!).
In practice, it is difficult to achieve vq->inuse == 0 across reset
because balloon, blk, 9p, etc implement various different strategies for
cleaning up requests. Most devices call g_free(elem) directly without
telling virtio.c that the VirtQueueElement is cleaned up. Therefore
vq->inuse is not decremented during reset.
This patch zeroes vq->inuse and trusts that devices are not leaking
VirtQueueElements across reset.
I will send a follow-up series that refactors request life-cycle across
all devices and converts vq->inuse = 0 into assert(vq->inuse == 0) but
this more invasive approach is not appropriate for stable trees.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Currently each VQ Notification Virtio Capability is allocated
on a different page. The idea is to enable split drivers within
guests, however there are no known plans to do that.
The allocation will result in a 8MB BAR, more than various
guest firmwares pre-allocates for PCI Bridges hotplug process.
Reserve 4 bytes per VQ by default and add a new parameter
"page-per-vq" to be used with split drivers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIO MR registration should use size from the correct notify struct.
Doesn't affect any visible behaviour because the field values are the
same (both are 4).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
event_notifier_init() can fail in real life, for example when there
are not enough open file handles available (EMFILE) when using a lot
of devices. So instead of leaving the average user with a cryptic
error number only, print out a proper error message with strerror()
instead, so that the user has a better way to figure out what is
going on and that using "ulimit -n" might help here for example.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtqueue_discard() moves vq->last_avail_idx back so the element can be
popped again. It's necessary to decrement vq->inuse to avoid "leaking"
the element count.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vq->inuse field is not migrated. Many devices don't hold
VirtQueueElements across migration so it doesn't matter that vq->inuse
starts at 0 on the destination QEMU.
At least virtio-serial, virtio-blk, and virtio-balloon migrate while
holding VirtQueueElements. For these devices we need to recalculate
vq->inuse upon load so the value is correct.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 28ed5ef163.
I still think it's the right thing to do, but
tests have been failing sporadically.
Revert for now, and hope to fix it before the release.
Cc: Prerna Saxena <prerna.saxena@nutanix.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc-André Lureau <mlureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1471268075-3425-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The set_mem_table command currently does not seek a reply. Hence, there is
no easy way for a remote application to notify to QEMU when it finished
setting up memory, or if there were errors doing so.
As an example:
(1) Qemu sends a SET_MEM_TABLE to the backend (eg, a vhost-user net
application). SET_MEM_TABLE does not require a reply according to the spec.
(2) Qemu commits the memory to the guest.
(3) Guest issues an I/O operation over a new memory region which was configured on (1).
(4) The application has not yet remapped the memory, but it sees the I/O request.
(5) The application cannot satisfy the request because it does not know about those GPAs.
While a guaranteed fix would require a protocol extension (committed separately),
a best-effort workaround for existing applications is to send a GET_FEATURES
message before completing the vhost_user_set_mem_table() call.
Since GET_FEATURES requires a reply, an application that processes vhost-user
messages synchronously would probably have completed the SET_MEM_TABLE before replying.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This introduces the VHOST_USER_PROTOCOL_F_REPLY_ACK.
If negotiated, client applications should send a u64 payload in
response to any message that contains the "need_reply" bit set
on the message flags. Setting the payload to "zero" indicates the
command finished successfully. Likewise, setting it to "non-zero"
indicates an error.
Currently implemented only for SET_MEM_TABLE.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
a bunch of bugfixes and a couple of cleanups
making these easier and/or making debugging easier
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXmslFAAoJECgfDbjSjVRpev0IAMZghEuSeKMB2JR88dErS8P5
J6y/1W2VFuRa1YBkTz/ecr5r2RwIO5teZUZpUkibM65Zo6bu1liMo6gbzeCg/xOi
k437pNRl6W9RVWuXQM9VOegNoGYhX3Hrnu3iQeiT8KRY3OMCwG52umUXYVodJh1R
mlozlEcSyUEDZVdNjhRECuUiw8RRcErEtiKda+zjkf4tPAGkyCItVpLYshE6A2/I
lfQLkv+EWOyuD4cfEHl+4F9K9wegothFTSd/xBmcqqaWRc+pboMVF2A2yga+GjKm
Xgb8SzQYkt9Q1nFr9fz89q89CsjhmfrD/ct/vJAcCFnw/dNXnC6mYjr6MDX0Gd0=
=26Uu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: cleanups, fixes
a bunch of bugfixes and a couple of cleanups
making these easier and/or making debugging easier
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 29 Jul 2016 04:11:01 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (41 commits)
mptsas: Fix a migration compatible issue
vhost: do not update last avail idx on get_vring_base() failure
vhost: add vhost_net_set_backend()
vhost-user: add error report in vhost_user_write()
tests: fix vhost-user-test leak
tests: plug some leaks in virtio-net-test
vhost-user: wait until backend init is completed
char: add and use tcp_chr_wait_connected
char: add chr_wait_connected callback
vhost: add assert() to check runtime behaviour
vhost-net: vhost_migration_done is vhost-user specific
Revert "vhost-net: do not crash if backend is not present"
vhost-user: add get_vhost_net() assertions
vhost-user: keep vhost_net after a disconnection
vhost-user: check vhost_user_{read,write}() return value
vhost-user: check qemu_chr_fe_set_msgfds() return value
vhost-user: call set_msgfds unconditionally
qemu-char: fix qemu_chr_fe_set_msgfds() crash when disconnected
vhost: use error_report() instead of fprintf(stderr,...)
vhost: add missing VHOST_OPS_DEBUG
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The state.num value will probably be 0 in this case, but that
doesn't make sense to update.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not all vhost-user backends support ops->vhost_net_set_backend(). It is
a nicer to provide an assert/error than to crash trying to
call. Furthermore, it improves a bit the code by hiding vhost_ops
details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similar to vhost_user_read() error report, it is useful to have early
error report.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All these functions must be called only after the backend is connected.
They are called from virtio-net.c, after either virtio or link status
change.
The check for nc->peer->link_down should ensure vhost_net_{start,stop}()
are always called between vhost_user_{start,stop}().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-user code is quite inconsistent with error handling. Instead
of ignoring some return values of read/write and silently going on with
invalid state (invalid read for example), break the code flow when the
error happened.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check qemu_chr_fe_set_msgfds() for errors, to make sure the message to
be sent is correct.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is fine to call set_msgfds() with 0 fd, and ensures any previous fd
array is cleared.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's use qemu proper error reporting API, this ensures the error is
reported at the right place (stderr or monitor), with a conventional
format.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add missing VHOST_OPS_DEBUG() logs, for completeness.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Calling a vhost operation may fail, for example with disconnected
vhost-user backend, but qemu shouldn't abort in this case.
Log an error instead, except on error and cleanup code paths where it
can be mostly ignored.
Let's use a VHOST_OPS_DEBUG macro to easily disable those messages once
disconnected backend stabilizes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_net_init() calls vhost_dev_init() and in case of failure, calls
vhost_dev_cleanup() directly. However, the structure is already
partially cleaned on error. Calling vhost_dev_cleanup() again will call
vhost_virtqueue_cleanup() on already clean queues, and causing potential
double-close. Instead, adjust dev->nvqs and simplify vhost_dev_init()
code to not call vhost_virtqueue_cleanup() but vhost_dev_cleanup()
instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is called on multiple code path, so make it safe to call several
times (note: I don't remember a reproducer here, but a function called
'cleanup' should probably be idempotent in my book)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If vhost_dev_init() failed, caller may still call vhost_dev_cleanup()
later. However, vhost_dev_cleanup() tries to remove the device from the
list even if it wasn't yet added, which may lead to crashes. Similarly
for the memory listener.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure the log was released on cleanup, or it will leak (the
alternative is to call vhost_log_put() unconditionally, but it may hide
some dev state issues).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Although not strictly required, it is nice to have vhost_log_put()
safely callable multiple times.
Clear dev->log* when calling vhost_log_put() to make the function
idempotent. This also simplifies a bit the caller work.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-dev opaque isn't necessarily an fd, it can be a chardev when using
vhost-user. Goto fail, so vhost_backend_cleanup() is called to handle
backend cleanup appropriately.
vhost_set_backend_type() should never fail, use an assert().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio back end uses set of buffers to facilitate I/O operations.
An infinite loop unfolds in virtqueue_pop() if a buffer was
of zero size. Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Enable transitional virtio devices by default.
Enable virtio-1.0 for devices plugged into
PCIe ports (Root ports or Downstream ports).
Using the virtio-1 mode will remove the limitation
of the number of devices that can be attached to a machine
by removing the need for the IO BAR.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
A broken or malicious guest can submit more requests than the virtqueue
size permits, causing unbounded memory allocation in QEMU.
The guest can submit requests without bothering to wait for completion
and is therefore not bound by virtqueue size. This requires reusing
vring descriptors in more than one request, which is not allowed by the
VIRTIO 1.0 specification.
In "3.2.1 Supplying Buffers to The Device", the VIRTIO 1.0 specification
says:
1. The driver places the buffer into free descriptor(s) in the
descriptor table, chaining as necessary
and
Note that the above code does not take precautions against the
available ring buffer wrapping around: this is not possible since the
ring buffer is the same size as the descriptor table, so step (1) will
prevent such a condition.
This implies that placing more buffers into the virtqueue than the
descriptor table size is not allowed.
QEMU is missing the check to prevent this case. Processing a request
allocates a VirtQueueElement leading to unbounded memory allocation
controlled by the guest.
Exit with an error if the guest provides more requests than the
virtqueue size permits. This bounds memory allocation and makes the
buggy guest visible to the user.
This patch fixes CVE-2016-5403 and was reported by Zhenhao Hong from 360
Marvel Team, China.
Reported-by: Zhenhao Hong <hongzhenhao@360.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Forcibly convert it to a vmstate wrapper; proper conversion
comes later.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
