The curl hardcoded timeout (5 seconds) sometimes is not long
enough depending on the remote server configuration and network
traffic. The user should be able to set how much long he is
willing to wait for the connection.
Adding a new option to set this timeout gives the user this
flexibility. The previous default timeout of 5 seconds will be
used if this option is not present.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Reviewed-by: Benoit Canet <benoit.canet@nodalink.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The gcc 4.1.2 compiler warns that delay_ns may be uninitialized in
mirror_iteration().
There are two break statements in the do ... while loop that skip over
the delay_ns assignment. These are probably the cause of the warning.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Instead of bdrv_getlength().
Commit 57322b7 did this all over block, but one more bdrv_getlength()
has crept in since.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise error_callback_bh will access the already released acb.
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following O_DIRECT read from a <512 byte file fails:
$ truncate -s 320 test.img
$ qemu-io -n -c 'read -P 0 0 512' test.img
qemu-io: can't open device test.img: Could not read image for determining its format: Invalid argument
Note that qemu-io completes successfully without the -n (O_DIRECT)
option.
This patch fixes qemu-iotests ./check -nocache -vmdk 059.
Cc: qemu-stable@nongnu.org
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bs->total_sectors is not yet updated at this point. resulting
in memory corruption if the volume has grown and data is written
to the newly availble areas.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just log to stderr unconditionally, like other similar code does.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because blkdebug cannot simply create a configuration file, simply
refuse to reconstruct a plain filename and only generate an options
QDict from the rules instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add options for specifying the size of the metadata caches. This can
either be done directly for each cache (if only one is given, the other
will be derived according to a default ratio) or combined for both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With a variable cache size, the number given to qcow2_cache_create() may
be huge. Therefore, use g_try_new0().
While at it, use g_new0() instead of g_malloc0() for allocating the
Qcow2Cache object.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Specifying the metadata cache sizes in clusters results in less clusters
(and much less bytes) covered for small cluster sizes and vice versa.
Using a constant byte size reduces this difference, and makes it
possible to manually specify the cache size in an easily comprehensible
unit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
They clutter the code. Unfortunately, I can't figure out how to make
Coccinelle drop all of them, so I have to settle for common special
cases:
@@
type T;
T *pt;
void *pv;
@@
- pt = (T *)pv;
+ pt = pv;
@@
type T;
@@
- (T *)
(\(g_malloc\|g_malloc0\|g_realloc\|g_new\|g_new0\|g_renew\|
g_try_malloc\|g_try_malloc0\|g_try_realloc\|
g_try_new\|g_try_new0\|g_try_renew\)(...))
Topped off with minor manual style cleanups.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is safer than g_malloc(sizeof(*v) * n) for two reasons.
One, it catches multiplication overflowing size_t. Two, it returns
T * rather than void *, which lets the compiler catch more type
errors.
Perhaps a conversion to g_malloc_n() would be neater in places, but
that's merely four years old, and we can't use such newfangled stuff.
This commit only touches allocations with size arguments of the form
sizeof(T), plus two that use 4 instead of sizeof(uint32_t). We can
make the others safe by converting to g_malloc_n() when it becomes
available to us in a couple of years.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit de82815db1 ("qcow2: Handle failure
for potentially large allocations") introduced a double-free of
new_blocks in the alloc_refcount_block() error path.
The qemu-iotests qcow2 026 test case was failing because qemu-io
segfaulted.
Make sure new_blocks is NULL after we free it the first time.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Parallels has released in the recent updates of Parallels Server 5/6
new addition to his image format. Images with signature WithouFreSpacExt
have offsets in the catalog coded not as offsets in sectors (multiple
of 512 bytes) but offsets coded in blocks (i.e. header->tracks * 512)
In this case all 64 bits of header->nb_sectors are used for image size.
This patch implements support of this for qemu-img and also adds specific
check for an incorrect image. Images with block size greater than
INT_MAX/513 are not supported. The biggest available Parallels image
cluster size in the field is 1 Mb. Thus this limit will not hurt
anyone.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
and rework error path a bit. There is no difference at the moment, but
the code will be definitely shorter when additional processing will
be required for WithouFreSpacExt
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Parallels image format has several additional fields inside:
- nb_sectors is actually 64 bit wide. Upper 32bits are not used for
images with signature "WithoutFreeSpace" and must be explicitly
zeroed according to Parallels. They will be used for images with
signature "WithouFreSpacExt"
- inuse is magic which means that the image is currently opened for
read/write or was not closed correctly, the magic is 0x746f6e59
- data_off is the location of the first data block. It can be zero
and in this case data starts just beyond the header aligned to
512 bytes. Though this field does not matter for read-only driver
This patch adds these values to struct parallels_header and adds
proper handling of nb_sectors for currently supported WithoutFreeSpace
images.
WithouFreSpacExt will be covered in next patches.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Jeff Cody <jcody@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qcow2_alloc_cluster_offset() uses host_offset == 0 as "no preferred
offset" for the (data) cluster range to be allocated. However, this
offset is actually valid and may be allocated on images with a corrupted
refcount table or first refcount block.
In this case, the corruption prevention should normally catch that
write anyway (because it would overwrite the image header). But since 0
is a special value here, the function assumes that nothing has been
allocated at all which it asserts against.
Because this condition is not qemu's fault but rather that of a broken
image, it shouldn't throw an assertion but rather mark the image corrupt
and show an appropriate message, which this patch does by calling the
corruption check earlier than it would be called normally (before the
assertion).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If bdrv_pread() returns an error, it is very unlikely that it was
ENOMEM. In this case, the return value should be passed along; as
bdrv_pread() will always either return the number of bytes read or a
negative value (the error code), the condition for checking whether
bdrv_pread() failed can be simplified (and clarified) as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the mirror block job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the vpc block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the vmdk block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the vhdx block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the vdi block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the rbd block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the raw-win32 block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the raw-posix block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the qed block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the qcow2 block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the qcow1 block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the parallels block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the nfs block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the iscsi block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the dmg block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the curl block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the cloop block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the bochs block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Use the block layer to create, and write to, the image file in the VPC
.bdrv_create() operation.
This has a couple of benefits: Images can now be created over protocols,
and hacks such as NOCOW are not needed in the image format driver, and
the underlying file protocol appropriate for the host OS can be relied
upon.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most QEMU code uses 'ret' for function return values. The VDI driver
uses a mix of 'result' and 'ret'. This cleans that up, switching over
to the standard 'ret' usage.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use the block layer to create, and write to, the image file in the
VDI .bdrv_create() operation.
This has a couple of benefits: Images can now be created over protocols,
and hacks such as NOCOW are not needed in the image format driver, and
the underlying file protocol appropriate for the host OS can be relied
upon.
Also some minor cleanup for error handling.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch contains several changes for endian conversion fixes for
VHDX, particularly for big-endian machines (multibyte values in VHDX are
all on disk in LE format).
Tests were done with existing qemu-iotests on an IBM POWER7 (8406-71Y).
This includes sample images created by Hyper-V, both with dirty logs and
without.
In addition, VHDX image files created (and written to) on a BE machine
were tested on a LE machine, and vice-versa.
Reported-by: Markus Armburster <armbru@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This add an error check for an invalid descriptor entry signature,
when flushing the log descriptor entries.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VM Image on Archipelago volume can also be specified like this:
file=archipelago:<volumename>[/mport=<mapperd_port>[:vport=<vlmcd_port>][:
segment=<segment_name>]]
Examples:
file=archipelago:my_vm_volume
file=archipelago:my_vm_volume/mport=123
file=archipelago:my_vm_volume/mport=123:vport=1234
file=archipelago:my_vm_volume/mport=123:vport=1234:segment=my_segment
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VM Image on Archipelago volume is specified like this:
file.driver=archipelago,file.volume=<volumename>[,file.mport=<mapperd_port>[,
file.vport=<vlmcd_port>][,file.segment=<segment_name>]]
'archipelago' is the protocol.
'mport' is the port number on which mapperd is listening. This is optional
and if not specified, QEMU will make Archipelago to use the default port.
'vport' is the port number on which vlmcd is listening. This is optional
and if not specified, QEMU will make Archipelago to use the default port.
'segment' is the name of the shared memory segment Archipelago stack is using.
This is optional and if not specified, QEMU will make Archipelago to use the
default value, 'archipelago'.
Examples:
file.driver=archipelago,file.volume=my_vm_volume
file.driver=archipelago,file.volume=my_vm_volume,file.mport=123
file.driver=archipelago,file.volume=my_vm_volume,file.mport=123,
file.vport=1234
file.driver=archipelago,file.volume=my_vm_volume,file.mport=123,
file.vport=1234,file.segment=my_segment
Signed-off-by: Chrysostomos Nanakos <cnanakos@grnet.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add nocow info in 'qemu-img info' output to show whether the file
currently has NOCOW flag set or not.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This drops the unnecessary bdrv_truncate() from, and also improves,
cluster allocation code path.
Before, when we need a new cluster, get_cluster_offset truncates the
image to bdrv_getlength() + cluster_size, and returns the offset of
added area, i.e. the image length before truncating.
This is not efficient, so it's now rewritten as:
- Save the extent file length when opening.
- When allocating cluster, use the saved length as cluster offset.
- Don't truncate image, because we'll anyway write data there: just
write any data at the EOF position, in descending priority:
* New user data (cluster allocation happens in a write request).
* Filling data in the beginning and/or ending of the new cluster, if
not covered by user data: either backing file content (COW), or
zero for standalone images.
One major benifit of this change is, on host mounted NFS images, even
over a fast network, ftruncate is slow (see the example below). This
change significantly speeds up cluster allocation. Comparing by
converting a cirros image (296M) to VMDK on an NFS mount point, over
1Gbe LAN:
$ time qemu-img convert cirros-0.3.1.img /mnt/a.raw -O vmdk
Before:
real 0m21.796s
user 0m0.130s
sys 0m0.483s
After:
real 0m2.017s
user 0m0.047s
sys 0m0.190s
We also get rid of unchecked bdrv_getlength() and bdrv_truncate(), and
get a little more documentation in function comments.
Tested that this passes qemu-iotests for all VMDK subformats.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_get_geometry() hides errors. Use bdrv_nb_sectors() or
bdrv_getlength() instead where that's obviously inappropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It returns a multiple of the sector size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of bdrv_getlength().
Aside: a few of these callers don't handle errors. I didn't
investigate whether they should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If qemu couldn't find out what O_DIRECT alignment to use with a given
file, it would run into assert(bdrv_opt_mem_align(bs) != 0); in block.c
and confuse users. This adds a more descriptive error message for such
cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qcow2's report_unsupported_feature() had two bugs: A 32 bit truncation
would prevent feature table entries for bits 32-63 from being used, and
it could assign errp multiple times if there was more than one unknown
feature, resulting in an error_set() assertion failure.
Fix the truncation, make sure to set the error exactly once and add a
qemu-iotests case for it.
This fixes https://bugs.launchpad.net/qemu/+bug/1342704/
Reported-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
when hotplug virtio-scsi disks using laio, the aio_nr will
increase in laio_init() by io_setup(), we can see the number by
# cat /proc/sys/fs/aio-nr
128
if the aio_nr attach the maxnum, which found from
# cat /proc/sys/fs/aio-max-nr
65536
the hotplug process will fail because of aio context leak.
Fix it by io_destroy in laio_cleanup().
Reported-by: daifulai <daifulai@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
At least raw-posix relies on this because it can allocate bounce buffers
based on the request length, but access it using all of the qiov entries
later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If a QED image has a shorter backing file and a read request to
unallocated clusters goes across EOF of the backing file, the backing
file sees a shortened request and the rest is filled with zeros.
However, the original too long qiov was used with the shortened request.
This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a qcow2 image has a shorter backing file and a read request to
unallocated clusters goes across EOF of the backing file, the backing
file sees a shortened request and the rest is filled with zeros.
However, the original too long qiov was used with the shortened request.
This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When doing a block backup of an image with an unaligned size (with
respect to the BACKUP_CLUSTER_SIZE), qemu would check the allocation
status of sectors after the end of the image. bdrv_is_allocated()
returns a result that is valid for 0 sectors in this case, so the backup
job ran into an endless loop.
Stop looping when seeing a result valid for 0 sectors, we're at EOF then.
The test case looks somewhat unrelated at first sight because I
originally tried to reproduce a different suspected bug that turned out
to not exist. Still a good test case and it accidentally found this one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch implements .bdrv_io_plug, .bdrv_io_unplug and
.bdrv_flush_io_queue callbacks for linux-aio Block Drivers,
so that submitting I/O as a batch can be supported on linux-aio.
[Unprocessed requests are completed with -EIO instead of a bogus ret
value.
--Stefan]
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We got a merry mix of -1 and -errno here.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When mirroring an image of a size that is not a multiple of the
mirror job granularity, the last request would have the right nb_sectors
argument, but a qiov that is rounded up to the next multiple of the
granularity. Don't do this.
This fixes a segfault that is caused by raw-posix being confused by this
and allocating a buffer with request length, but operating on it with
qiov length.
[s/Driver/Drive/ in qemu-iotests 041 as suggested by Eric
--Stefan]
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block job.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-stream api, the user is able to change
the backing file of the active layer as part of the block-stream
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the active image metadata fails, then the block-stream
operation returns failure, without disrupting the guest.
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.
If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 25814e8987 introduced an error-exit code path which does
a "goto exit" before the cow_bs variable is initialized, meaning
we would call bdrv_unref() on an uninitialized variable and
likely segfault. Fix this by moving the NULL-initialization
to the top of the function and making the exit code path handle
the case where it is NULL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add 'nocow' option so that users could have a chance to set NOCOW flag to
newly created files. It's useful on btrfs file system to enhance performance.
Btrfs has low performance when hosting VM images, even more when the guest
in those VM are also using btrfs as file system. One way to mitigate this bad
performance is to turn off COW attributes on VM files. Generally, there are
two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then
all newly created files will be NOCOW. b) per file. Add the NOCOW file
attribute. It could only be done to empty or new files.
This patch tries the second way, according to the option, it could add NOCOW
per file.
For most block drivers, since the create file step is in raw-posix.c, so we
can do setting NOCOW flag ioctl in raw-posix.c only.
But there are some exceptions, like block/vpc.c and block/vdi.c, they are
creating file by calling qemu_open directly. For them, do the same setting
NOCOW flag ioctl work in them separately.
[Fixed up 082.out due to the new 'nocow' creation option
--Stefan]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make query-blockstats safe for dataplane by acquiring the
BlockDriverState's AioContext. This ensures that the dataplane IOThread
and the main loop's monitor code do not race.
Note the assumption that acquiring the drive's BDS AioContext also
protects ->file and ->backing_hd. This assumption is made by other
aio_context_acquire() callers too.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is only called from block/qapi.c. There is no need to
keep it public.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On read operations when this parameter is set and some replicas are corrupted
while quorum can be reached quorum will proceed to rewrite the correct version
of the data to fix the corrupted replicas.
This will shine with SSD where the FTL will remap the same block at another
place on rewrite.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).
This is obvious nonsense and should be rejected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
upcoming libnfs will feature internal readahead support.
Add a knob to pass the optional readahead value as a URL
parameter.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
this patch fixes the incorrect usage of strncmp and
adds simple error checking by means of parse_uint_full
instead of atoi for the supplied URL parameters.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When mirroring or active committing a zero length image, BLOCK_JOB_READY
is not reported now, instead the job completes because we short circuit
the mirror job loop.
This is inconsistent with non-zero length images, and only confuses
management software.
Let's do the same thing when seeing a 0-length image: report ready
immediately; wait for block-job-cancel or block-job-complete; clear the
cancel flag as existing non-zero image synced case (cancelled after
ready); then jump to the exit.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are
related, convert them in one patch. The block_job_event_* functions
are used to keep encapsulation of BlockJob structure.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Following command
qemu-img create -f qcow2 sheepdog:test 20g
will cause core dump because aio_context is NULL in sd_create. We should
initialize it by qemu_get_aio_context() to avoid NULL dereference.
Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
during rebasing the changed init value for the
retry counter was missed. This resulted in no retries
being performed at all.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch lifts the minimum supported libiscsi version from 1.4.0 to
1.9.0 since the BUSY patch required that change.
On one this allows us to remove all #ifdefs from the code which
makes the code easier to maintain and read. On the other hand
I would not recommend libiscsi prior to 1.8.0 for production use
because the following important libiscsi fixes for deadlocks and
protocol errors are missing prior to 1.8.0:
dbe9a1e SOCKET queue cmd PDUs directly in waitpdu queue
30df192 DATA-OUT set pdu->cmdsn appropriately
548bd22 ISCSI fix broken send logic in iscsi_scsi_async_command
14bee10 RECONNECT do not increase CmdSN for immediate PDUs
1f4a66a PDU queue out PDUs in order of itt.
562dd46 PDU avoid incrementing itt to 0xffffffff
cd09c0f PDU use serial32 arithmetic for cmdsn, maxcmdsn and expcmdsn.
89e918e SOCKET validate data_size in in_pdu header
91267f5 Limit immediate and unsolicited data to FirstBurstLength
Note that libiscsi 1.9.0 was released on Feb 24th, 2013, about
one month after 1.8.0.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch changes the driver to uses 16 Byte CDBs for
READ/WRITE only if the target requires 64bit lba addressing.
On one hand this saves 6 bytes in each PDU on the other
hand it seems that 10 Byte CDBs seems to be much better
supported and tested as a recent issue I had with a
major storage supplier lined out.
For WRITESAME the logic is a bit more tricky as WRITESAME10
with UNMAP was added really late. Thus a fallback to WRITESAME16
is possible if it supports UNMAP and WRITESAME10 not.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it might happen in the future that a function directly invokes its callback.
In this case we end up in a segfault because the iTask is gone when the BH
is scheduled.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch adds handling of BUSY status reponse from an iSCSI target.
Currently, we fail with -EIO in case of SCSI_STATUS_BUSY while the
obvious reaction would be to retry the operation after some time.
The retry time is randomly choosen from a range with exponential
growth increasing with each retry.
This patch includes most of the changes by a an upcoming patch
from Stefan Hajnoczi:
iscsi: implement .bdrv_detach/attach_aio_context()
because I also need the reference to the aio_context for
the retry timer to work. I included the changes to maintain
better mergeability.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
One extra change is to define QED_DEFAULT_CLUSTER_SIZE = 65536 instead
of 64 * 1024; because:
according to existing create_options, "cluster size" has default value =
QED_DEFAULT_CLUSTER_SIZE, after switching to create_opts, this has to be
stringized and set to .def_value_str. That is,
.def_value_str = stringify(QED_DEFAULT_CLUSTER_SIZE),
so the QED_DEFAULT_CLUSTER_SIZE could not be a expression.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vvfat shares create options of qcow driver. To avoid vvfat breaking when
qcow driver changes from QEMUOptionParameter to QemuOpts, let it able
to handle both cases.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
it will happen in the future that the callback of a libnfs call
directly invokes the callback. In this case we end up in a segfault
because the NFSRPC is gone when we the BH is scheduled.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This should be a problem when running on big-endian machines.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
sheepdog driver doesn't need to read data_vdi_id[] when a live snapshot is
created.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Liu Yuan <namei.unix@gmail.com>
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sheepdog driver should decide a write request is COW or not based on inode
object which is active when the write request is issued.
Example of wrong inode update path in the previous driver:
1. drier issues an ordinal write request to an existing object
2. user creates a snapshot of the VDI before the write request is completed
3. the respones for the request is RDONLY, because the VDI is already a snapshot
4. the driver reload an inode object of the new active VDI, then issues a write
request again
5. the second write request can be completed
6. driver decide the request is COW or not with the below conditional branch:
if (s->inode.data_vdi_id[idx] != s->inode.vdi_id) {
7. the ID of the written object and VID of the new active VDI is different, so
the driver updates data_vdi_id[idx] and writes inode object
8. the existing object cannot be seen by the new active VDI, it results object
leaking
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Liu Yuan <namei.unix@gmail.com>
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio-blk data-plane now uses the QEMU block layer for I/O. We do not
need raw_get_aio_fd() anymore. It was a layering violation anyway, so
let's get rid of it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement .bdrv_detach/attach_aio_context() interfaces to propagate
detach/attach to BDRVVmdkState->extents[].file. The block layer takes
care of ->file and ->backing_hd but doesn't know about our extents
BlockDriverStates, which is also part of the graph.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Use
bdrv_get_aio_context() to register fd handlers in the right AioContext
for this BlockDriverState.
The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.
For now this doesn't make much difference but will allow ssh to work in
IOThread instances in the future.
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_aio_set_fd_handler() to aio_set_fd_handler() and qemu_aio_wait() to
aio_poll().
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the socket fd handler from the old to the new
AioContext.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Acked-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_bh_new() to aio_bh_new() and qemu_aio_wait() to aio_poll().
The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.
Cc: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Drop the assumption that we're using the main AioContext for raw-win32.
Convert the aio-win32 code to support detach/attach and replace
qemu_aio_wait() with aio_poll().
The .bdrv_detach/attach_aio_context() interfaces move the aio-win32
event notifier from the old to the new AioContext.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Each QEMUWin32AIOState event notifier is associated with an AioContext.
Since BlockDriverState instances can use different AioContexts we cannot
continue to use a global QEMUWin32AIOState.
Let each BDRVRawState have its own QEMUWin32AIOState and free it when
BDRVRawState is closed.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Hot unplugging -drive aio=native,file=test.img,format=raw images leaves
the Linux AIO event notifier and struct qemu_laio_state allocated.
Luckily nothing will use the event notifier after the BlockDriverState
has been closed so the handler function is never called.
It's still worth fixing this resource leak.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext for Linux AIO.
Convert the Linux AIO event notifier to use aio_set_event_notifier().
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the event notifier handler from the old to the new
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement .bdrv_detach/attach_aio_context() interfaces to propagate
detach/attach to BDRVQuorumState->bs[] children. The block layer takes
care of ->file and ->backing_hd but doesn't know about our ->bs[]
BlockDriverStates, which is also part of the graph.
Reviewed-by: Benoît Canet <benoit.canet@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_bh_new() to aio_bh_new() and qemu_aio_wait() to aio_poll() so we're
using the BlockDriverState's AioContext.
Implement .bdrv_detach/attach_aio_context() interfaces to move the
QED_F_NEED_CHECK timer from the old AioContext to the new one.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. The following
functions need to be converted:
* qemu_bh_new() -> aio_bh_new()
* qemu_aio_set_fd_handler() -> aio_set_fd_handler()
* qemu_aio_wait() -> aio_poll()
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the fd handler from the old to the new AioContext.
Cc: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Drop the assumption that we're using the main AioContext. Convert
qemu_aio_set_fd_handler() calls to aio_set_fd_handler().
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the socket fd handler from the old to the new
AioContext.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext for Linux
AIO. Convert qemu_aio_set_fd_handler() to aio_set_fd_handler() and
timer_new_ms() to aio_timer_new().
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the fd and timer from the old to the new AioContext.
Cc: Peter Lieven <pl@kamp.de>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Drop the assumption that we're using the main AioContext. Use
aio_bh_new() instead of qemu_bh_new().
The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The curl block driver uses fd handlers, timers, and BHs. The fd
handlers and timers are managed on behalf of libcurl, which controls
them using callback functions that the block driver implements.
The simplest way to implement .bdrv_detach/attach_aio_context() is to
clean up libcurl in the old event loop and initialize it again in the
new event loop. We do not need to keep track of anything since there
are no pending requests when the AioContext is changed.
Also make sure to use aio_set_fd_handler() instead of
qemu_aio_set_fd_handler() and aio_bh_new() instead of qemu_bh_new() so
the current AioContext is passed in.
Cc: Alexander Graf <agraf@suse.de>
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_bh_new() to aio_bh_new() and qemu_aio_wait() to aio_poll() so we
use the BlockDriverState's AioContext.
Implement .bdrv_detach/attach_aio_context() interfaces to propagate
detach/attach to BDRVBlkverifyState->test_file. The block layer takes
care of ->file and ->backing_hd but doesn't know about our ->test_file
BlockDriverState, which is also part of the graph.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_bh_new() to aio_bh_new() so we use the BlockDriverState's
AioContext.
The .bdrv_detach_aio_context() and .bdrv_attach_aio_context() interfaces
are not needed since no fd handlers, timers, or BHs stay registered when
requests have been drained.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In vmdk_create and vmdk_create_extent, initialize local_err before using
it, and don't leak it on error.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the MacOSX specific code in raw-posix.c we use the define
LONG_LONG_MAX. This is actually a non-standard pre-C99 define;
switch to using the standard LLONG_MAX instead.
This apparently fixes a compilation failure with certain
compiler/OS versions (though it is unclear which).
Reported-by: Peter Bartoli <peter@bartoli.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Has always been leaky. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Has always been leaky. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On error path. Introduced in commit a046433a. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduced in commit a8d8ecb. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduced in commit 5a8a30d. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I figure the leak originated in bdrv_create2(), and was duplicated
into callers when commit 91a073a dropped that function. Looks like
the other places have since been fixed.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP. It should not be used elsewhere.
Replace by error_report().
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Open and create methods must set an error when they fail.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Completes the conversion to Error started in commit 015a103^..d5124c0,
except for a few bugs fixed in the next commit.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
