The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server whether it intends to
obey block sizes.
When using the block layer as the client, we will obey block
sizes; but when used as 'qemu-nbd -c' to hand off to the
kernel nbd module as the client, we are still waiting for the
kernel to implement a way for us to learn if it will honor
block sizes (perhaps by an addition to sysfs, rather than an
ioctl), as well as any way to tell the kernel what additional
block sizes to obey (NBD_SET_BLKSIZE appears to be accurate
for the minimum size, but preferred and maximum sizes would
probably be new ioctl()s), so until then, we need to make our
request for block sizes conditional.
When using ioctl(NBD_SET_BLKSIZE) to hand off to the kernel,
use the minimum block size as the sector size if it is larger
than 512, which also has the nice effect of cooperating with
(non-qemu) servers that don't do read-modify-write when
exposing a block device with 4k sectors; it might also allow
us to visit a file larger than 2T on a 32-bit kernel.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-10-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD Protocol is introducing some additional information
about exports, such as minimum request size and alignment, as
well as an advertised maximum request size. It will be easier
to feed this information back to the block layer if we gather
all the information into a struct, rather than adding yet more
pointer parameters during negotiation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-2-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.
All of the warnings were changed using these two commands:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Implement the preallocation modes falloc and full for growing qcow2
images.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613202107.10125-15-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now alloc_refcount_block() only contains a single fail label, so it
makes more sense to just name it "fail" instead of "fail_block".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function creates a collection of self-describing refcount
structures (including a new refcount table) at the end of a qcow2 image
file. Optionally, these structures can also describe a number of
additional clusters beyond themselves; this will be important for
preallocated truncation, which will place the data clusters and L2
tables there.
For now, we can use this function to replace the part of
alloc_refcount_block() that grows the refcount table (from which it is
actually derived).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We can support PREALLOC_MODE_METADATA by invoking preallocate() in
qcow2_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613202107.10125-12-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
preallocate() is and will be called only from places that do not
otherwise need to lock s->lock: Currently that is qcow2_create2(), as of
a future patch it will be called from qcow2_truncate(), too.
It therefore makes sense to move locking that mutex into preallocate()
itself.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds two new parameters to the preallocate() function so we
will be able to use it not just for preallocating a new image but also
for preallocated image growth.
The offset parameter allows the caller to specify a virtual offset from
which to start preallocating. For newly created images this is always 0,
but for preallocating growth this will be the old image length.
The new_length parameter specifies the supposed new length of the image
(basically the "end offset" for preallocation). During image truncation,
bdrv_getlength() will return the old image length so we cannot rely on
its return value then.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
By using raw_regular_truncate() in raw_truncate(), we can now easily
support preallocation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, raw_regular_truncate() is intended for setting the size of a
newly created file. However, we also want to use it for truncating an
existing file in which case only the newly added space (when growing)
should be preallocated.
This also means that if resizing failed, we should try to restore the
original file size. This is important when using preallocation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This functionality is part of raw_create() which we will be able to
reuse nicely in raw_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170613202107.10125-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Variables should be declared at the start of a block, and if a certain
parameter value is not supported it may be better to return -ENOTSUP
instead of -EINVAL.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170613202107.10125-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
blk_truncate() itself will pass that value to bdrv_truncate(), and all
callers of blk_truncate() just set the parameter to PREALLOC_MODE_OFF
for now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use qcow2_calc_prealloc_size() to get the required file size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-7-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The image creation options parsed by qcow2_create() are also needed to
implement .bdrv_measure(). Extract the parsing code, including input
validation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-6-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The refcount metadata size calculation is inaccurate and can produce
numbers that are too small. This is bad because we should calculate a
conservative number - one that is guaranteed to be large enough.
This patch switches the approach to a fixed point calculation because
the existing equation is hard to solve when inaccuracies are taken care
of.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-5-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Calculating the preallocated image size will be needed to implement
.bdrv_measure(). Extract the code out into a separate function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-4-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Maximum size calculation is trivial for the raw format: it's just the
requested image size (because there is no metadata).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-3-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We should release them here to reload on invalidate cache.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-31-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Interface for removing persistent bitmap from its storage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-28-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Store bitmaps and mark them read-only on reopening image as read-only.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-21-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Store persistent dirty bitmaps in qcow2 image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-20-vsementsov@virtuozzo.com
[mreitz: Always assign ret in store_bitmap() in case of an error]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-19-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
New field BdrvDirtyBitmap.persistent means, that bitmap should be saved
by format driver in .bdrv_close and .bdrv_inactivate. No format driver
supports it for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-18-vsementsov@virtuozzo.com
[mreitz: Fixed indentation]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Mirror AUTO flag from Qcow2 bitmap in BdrvDirtyBitmap. This will be
needed in future, to save this flag back to Qcow2 for persistent
bitmaps.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-16-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Auto loading bitmaps are bitmaps in Qcow2, with the AUTO flag set. They
are loaded when the image is opened and become BdrvDirtyBitmaps for the
corresponding drive.
Extra data in bitmaps is not supported for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-12-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It will be needed in following commits for persistent bitmaps.
If bitmap is loaded from read-only storage (and we can't mark it
"in use" in this storage) corresponding BdrvDirtyBitmap should be
read-only.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170628120530.31251-11-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-10-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add bitmap extension as specified in docs/specs/qcow2.txt.
For now, just mirror extension header into Qcow2 state and check
constraints. Also, calculate refcounts for qcow2 bitmaps, to not break
qemu-img check.
For now, disable image resize if it has bitmaps. It will be fixed later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-9-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is needed for the following patch, which will introduce refcounts
checking for qcow2 bitmaps.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-8-vsementsov@virtuozzo.com
[mreitz: s/inc_refcounts/qcow2_inc_refcounts_imrt/ in one more (new)
place]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add bdrv_dirty_bitmap_deserialize_ones() function, which is needed for
qcow2 bitmap loading, to handle unallocated bitmap parts, marked as
all-ones.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-7-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make getter signature const-correct. This allows other functions with
const dirty bitmap parameter use bdrv_dirty_bitmap_granularity().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628120530.31251-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the crypto layer uses a fixed option name "key-secret",
the upper block layer may have a prefix on the options. e.g.
"encrypt.key-secret", in order to avoid clashes between crypto
option names & other block option names. To ensure the crypto
layer can report accurate error messages, we must tell it what
option name prefix was used.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-19-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds support for using LUKS as an encryption format
with the qcow2 file, using the new encrypt.format parameter
to request "luks" format. e.g.
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \
test.qcow2 10G
The legacy "encryption=on" parameter still results in
creation of the old qcow2 AES format (and is equivalent
to the new 'encryption-format=aes'). e.g. the following are
equivalent:
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption=on,encrypt.key-secret=sec0 \
test.qcow2 10G
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \
test.qcow2 10G
With the LUKS format it is necessary to store the LUKS
partition header and key material in the QCow2 file. This
data can be many MB in size, so cannot go into the QCow2
header region directly. Thus the spec defines a FDE
(Full Disk Encryption) header extension that specifies
the offset of a set of clusters to hold the FDE headers,
as well as the length of that region. The LUKS header is
thus stored in these extra allocated clusters before the
main image payload.
Aside from all the cryptographic differences implied by
use of the LUKS format, there is one further key difference
between the use of legacy AES and LUKS encryption in qcow2.
For LUKS, the initialiazation vectors are generated using
the host physical sector as the input, rather than the
guest virtual sector. This guarantees unique initialization
vectors for all sectors when qcow2 internal snapshots are
used, thus giving stronger protection against watermarking
attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-14-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow2 driver to make use of the QCryptoBlock
APIs for encrypting image content, using the legacy QCow2 AES
scheme.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0
The test 087 could be simplified since there is no longer a
difference in behaviour when using blockdev_add with encrypted
images for the running vs stopped CPU state.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-12-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of requiring separate input/output buffers for
encrypting data, change qcow2_encrypt_sectors() to assume
use of a single buffer, encrypting in place. The current
callers all used the same buffer for input/output already.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-11-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow driver to make use of the QCryptoBlock
APIs for encrypting image content. This is only wired up to
permit use of the legacy QCow encryption format. Users who wish
to have the strong LUKS format should switch to qcow2 instead.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow,encrypt.format=aes,\
encrypt.key-secret=sec0
Though note that running QEMU system emulators with the AES
encryption is no longer supported, so while the above syntax
is valid, QEMU will refuse to actually run the VM in this
particular example.
Likewise when creating images with the legacy AES-CBC format
qemu-img create -f qcow \
--object secret,id=sec0,file=/home/berrange/encrypted.pw \
-o encrypt.format=aes,encrypt.key-secret=sec0 \
/home/berrange/encrypted.qcow 64M
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-10-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of requiring separate input/output buffers for
encrypting data, change encrypt_sectors() to assume
use of a single buffer, encrypting in place. One current
caller uses the same buffer for input/output already
and the other two callers are easily converted to do so.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-9-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.
This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.
e.g. the preferred syntax is now
qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The qcow driver refuses to open images which are less than
2 bytes in size, but will happily create such images. Add
a check in the create path to avoid this discrepancy.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-5-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When integrating the crypto support with qcow/qcow2, we don't
want to use the bare LUKS option names "hash-alg", "key-secret",
etc. We need to namespace them to match the nested QAPI schema.
e.g. "encrypt.hash-alg", "encrypt.key-secret"
so that they don't clash with any general qcow options at a later
date.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The block/crypto.c defines a set of QemuOpts that provide
parameters for encryption. This will also be needed by
the qcow/qcow2 integration, so expose the relevant pieces
in a new block/crypto.h header. Some helper methods taking
QemuOpts are changed to take QDict to simplify usage in
other places.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, for the most part this patch is just the
addition of scaling at the callers followed by inverse scaling at
bdrv_is_allocated(). But some code, particularly stream_run(),
gets a lot simpler because it no longer has to mess with sectors.
Leave comments where we can further simplify by switching to
byte-based iterations, once later patches eliminate the need for
sector-aligned operations.
For ease of review, bdrv_is_allocated() was tackled separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_allocated_above() was relying on intermediate->total_sectors,
which is a field that can have stale contents depending on the value
of intermediate->has_variable_length. An audit shows that we are safe
(we were first calling through bdrv_co_get_block_status() which in
turn calls bdrv_nb_sectors() and therefore just refreshed the current
length), but it's nicer to favor our accessor functions to avoid having
to repeat such an audit, even if it means refresh_total_sectors() is
called more frequently.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned
on input and that *pnum is sector-aligned on return to the caller,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, this code adds usages like
DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned
values, where the call might reasonbly give non-aligned results
in the future; on the other hand, no rounding is needed for callers
that should just continue to work with byte alignment.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_is_allocated(). But
some code, particularly bdrv_commit(), gets a lot simpler because it
no longer has to mess with sectors; also, it is now possible to pass
NULL if the caller does not care how much of the image is allocated
beyond the initial offset. Leave comments where we can further
simplify once a later patch eliminates the need for sector-aligned
requests through bdrv_is_allocated().
For ease of review, bdrv_is_allocated_above() will be tackled
separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Change the internal
loop iteration of backups to track by bytes instead of sectors
(although we are still guaranteed that we iterate by steps that
are cluster-aligned).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function (no semantic change).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Continue by converting
the public interface to backup jobs (no semantic change), including
a change to CowRequest to track by bytes instead of cluster indices.
Note that this does not change the difference between the public
interface (starting point, and size of the subsequent range) and
the internal interface (starting and end points).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Xie Changlong <xiechanglong@cmss.chinamobile.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Continue by converting an
internal structure (no semantic change), and all references to
tracking progress. Drop a redundant local variable bytes_per_cluster.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the last user [mirror_iteration()] has converted to using
bytes, we no longer need a function to round sectors to clusters.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Change the internal
loop iteration of mirroring to track by bytes instead of sectors
(although we are still guaranteed that we iterate by steps that
are both sector-aligned and multiples of the granularity). Drop
the now-unused mirror_clip_sectors().
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function, preserving all existing semantics, and adding one more
assertion that things are still sector-aligned (so that conversions
to sectors in mirror_read_complete don't need to round).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function (no semantic change), and add mirror_clip_bytes() as a
counterpart to mirror_clip_sectors(). Some of the conversion is
a bit tricky, requiring temporaries to convert between units; it
will be cleared up in a following patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than having a void function that modifies its input
in-place as the output, change the signature to reduce a layer
of indirection and return the result.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Convert another internal
function (no semantic change).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Continue by converting an
internal structure (no semantic change), and all references to the
buffer size.
Add an assertion that our use of s->granularity >> BDRV_SECTOR_BITS
(necessary for interaction with sector-based dirty bitmaps, until
a later patch converts those to be byte-based) does not suffer from
truncation problems.
[checkpatch has a false positive on use of MIN() in this patch]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Change the internal
loop iteration of committing to track by bytes instead of sectors
(although we are still guaranteed that we iterate by steps that
are sector-aligned).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Start by converting an
internal function (no semantic change).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Change the internal
loop iteration of streaming to track by bytes instead of sectors
(although we are still guaranteed that we iterate by steps that
are sector-aligned).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
stream_complete() skips the work of rewriting the backing file if
the job was cancelled, if data->reached_end is false, or if there
was an error detected (non-zero data->ret) during the streaming.
But note that in stream_run(), data->reached_end is only set if the
loop ran to completion, and data->ret is only 0 in two cases:
either the loop ran to completion (possibly by cancellation, but
stream_complete checks for that), or we took an early goto out
because there is no bs->backing. Thus, we can preserve the same
semantics without the use of reached_end, by merely checking for
bs->backing (and logically, if there was no backing file, streaming
is a no-op, so there is no backing file to rewrite).
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually converting to byte-based interfaces, as they are
easier to reason about than sector-based. Start by converting an
internal function (no semantic change).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Upcoming patches are going to switch to byte-based interfaces
instead of sector-based. Even worse, trace_backup_do_cow_enter()
had a weird mix of cluster and sector indices.
The trace interface is low enough that there are no stability
guarantees, and therefore nothing wrong with changing our units,
even in cases like trace_backup_do_cow_skip() where we are not
changing the trace output. So make the tracing uniformly use
bytes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The user interface specifies job rate limits in bytes/second.
It's pointless to have our internal representation track things
in sectors/second, particularly since we want to move away from
sector-based interfaces.
Fix up a doc typo found while verifying that the ratelimit
code handles the scaling difference.
Repetition of expressions like 'n * BDRV_SECTOR_SIZE' will be
cleaned up later when functions are converted to iterate over
images by bytes rather than by sectors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According to specification:
"'MSWIN4.1' is the recommanded setting, because it is the setting least likely
to cause compatibility problems. If you want to put something else in here,
that is your option, but the result may be that some FAT drivers might not
recognize the volume."
Specification: "FAT: General overview of on-disk format" v1.03, page 9
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Specification: "FAT: General overview of on-disk format" v1.03, page 23
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
FAT12/FAT16 root directory is two sectors in size, which allows only 512 directory entries.
Prevent QEMU startup if too much files exist, instead of overflowing root directory.
Also introduce variable root_entries, which will be required for FAT32.
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539/comments/4
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
More specifically:
- try without numeric-tail only if LFN didn't have invalid short chars
- start at ~1 (instead of ~0)
- handle case if numeric tail is more than one char (ie > 10)
Windows 9x Scandisk doesn't see anymore mismatches between short file names and
long file names for non-ASCII filenames.
Specification: "FAT: General overview of on-disk format" v1.03, page 31
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
More specifically, create short name from filename and change blacklist of
invalid chars to whitelist of valid chars.
Windows 9x also now correctly see long file names of filenames containing a space,
but Scandisk still complains about mismatch between SFN and LFN.
[kwolf: Build fix for this intermediate patch (it included declarations
for variables that are only used in the next patch) ]
Specification: "FAT: General overview of on-disk format" v1.03, pages 30-31
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Assume that input filename is encoded as UTF-8, so correctly create UTF-16 encoding.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
readdir() doesn't always return . and .. entries at first and in that order.
This leads to not creating them at first in the directory, which raises some
errors on file system checking utilities like MS-DOS Scandisk.
Specification: "FAT: General overview of on-disk format" v1.03, page 25
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Specification: "FAT: General overview of on-disk format" v1.03, pages 11-13
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- offset_to_bootsector is the number of sectors up to FAT bootsector
- offset_to_fat is the number of sectors up to first File Allocation Table
- offset_to_root_dir is the number of sectors up to root directory sector
Replace first_sectors_number - 1 by offset_to_bootsector.
Replace first_sectors_number by offset_to_fat.
Replace faked_sectors by offset_to_rootdir.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
MODE_FAKED and MODE_RENAMED are not and were never used.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This was a complete mess. On 2299 indented lines:
- 1329 were with spaces only
- 617 with tabulations only
- 353 with spaces and tabulations
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- bs->total_sectors is the number of sectors of the whole disk
- s->sector_count is the number of sectors of the FAT partition
This fixes the following assert in qemu-img map:
qemu-img.c:2641: get_block_status: Assertion `nb_sectors' failed.
This also fixes an infinite loop in qemu-img convert.
Fixes: 4480e0f924
Fixes: https://bugs.launchpad.net/qemu/+bug/1599539
Cc: qemu-stable@nongnu.org
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without a passthrough status of BDRV_BLOCK_RAW, anything wrapped by
blkdebug appears 100% allocated as data. Better is treating it the
same as the underlying file being wrapped.
Update iotest 177 for the new expected output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The lone caller that cares about a return of BDRV_BLOCK_RAW
(namely, io.c:bdrv_co_get_block_status) completely replaces the
return value, so there is no point in passing BDRV_BLOCK_DATA.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We document that *file is valid if the return is not an error and
includes BDRV_BLOCK_OFFSET_VALID, but forgot to obey this contract
when a driver (such as blkdebug) lacks a callback. Messed up in
commit 67a0fd2 (v2.6), when we added the file parameter.
Enhance qemu-iotest 177 to cover this, using a sequence that would
print garbage or even SEGV, because it was dererefencing through
uninitialized memory. [The resulting test output shows that we
have less-than-ideal block status from the blkdebug driver, but
that's a separate fix coming up soon.]
Setting *file on all paths that return BDRV_BLOCK_OFFSET_VALID is
enough to fix the crash, but we can go one step further: always
setting *file, even on error, means that a broken caller that
blindly dereferences file without checking for error is now more
likely to get a reliable SEGV instead of randomly acting on garbage,
making it easier to diagnose such buggy callers. Adding an
assertion that file is set where expected doesn't hurt either.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When attaching the NBD QIOChannel to an AioContext, the TLS channel should
be used, not the underlying socket channel. This is because, trivially,
the TLS channel will be the one that we read/write to and thus the one
that will get the qio_channel_yield() call.
Fixes: ff82911cd3
Cc: qemu-stable@nongnu.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we have a BDS with unallocated clusters, but asking the status
of its underlying bs->file or backing layer encounters an end-of-file
condition, we know that the rest of the unallocated area will read as
zeroes. However, pre-patch, this required two separate calls to
bdrv_get_block_status(), as the first call stops at the point where
the underlying file ends. Thanks to BDRV_BLOCK_EOF, we can now widen
the results of the primary status if the secondary status already
includes BDRV_BLOCK_ZERO.
In turn, this fixes a TODO mentioned in iotest 154, where we can now
see that all sectors in a partial cluster at the end of a file read
as zero when coupling the shorter backing file's status along with our
knowledge that the remaining sectors came from an unallocated cluster.
Also, note that the loop in bdrv_co_get_block_status_above() had an
inefficent exit: in cases where the active layer sets BDRV_BLOCK_ZERO
but does NOT set BDRV_BLOCK_ALLOCATED (namely, where we know we read
zeroes merely because our unallocated clusters lie beyond the backing
file's shorter length), we still ended up probing the backing layer
even though we already had a good answer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170505021500.19315-3-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Just as the block layer already sets BDRV_BLOCK_ALLOCATED as a
shortcut for subsequent operations, there are also some optimizations
that are made easier if we can quickly tell that *pnum will advance
us to the end of a file, via a new BDRV_BLOCK_EOF which gets set
by the block layer.
This just plumbs up the new bit; subsequent patches will make use
of it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170505021500.19315-2-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
uri_parse(...)->scheme may be NULL. In fact, probably every field may be
NULL, and the callers do test this for all of the other fields but not
for scheme (except for block/gluster.c; block/vxhs.c does not access
that field at all).
We can easily fix this by using g_strcmp0() instead of strcmp().
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613205726.13544-1-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The bs->exact_filename field may not be sufficient to store the full
blkverify node filename. In this case, we should not generate a filename
at all instead of an unusable one.
Cc: qemu-stable@nongnu.org
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613172006.19685-3-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The bs->exact_filename field may not be sufficient to store the full
blkdebug node filename. In this case, we should not generate a filename
at all instead of an unusable one.
Cc: qemu-stable@nongnu.org
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613172006.19685-2-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related
functions (and some others) to 'int bytes', as they both refer to bytes.
This helps with code legibility.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
All functions that are marked coroutine_fn can directly call the
bdrv_co_* version of functions instead of going through the wrapper.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that we stay in coroutine context for the whole request when doing
reads or writes, we can add coroutine_fn annotations to many functions
that can do I/O or yield directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes the last place where we degraded from AIO to actual blocking
synchronous I/O requests. Putting it into a coroutine means that instead
of blocking, the coroutine simply yields while doing I/O.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that we process a request in the same coroutine from beginning to
end and don't drop out of it any more, we can look like a proper
coroutine-based driver and simply call qed_aio_next_io() and get a
return value from it instead of spawning an additional coroutine that
reenters the parent when it's done.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that we're running in coroutine context, the ad-hoc serialisation
code (which drops a request that has to wait out of coroutine context)
can be replaced by a CoQueue.
This means that when we resume a serialised request, it is running in
coroutine context again and its I/O isn't blocking any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Most of the qed code is now synchronous and matches the coroutine model.
One notable exception is the serialisation between requests which can
still schedule a callback. Before we can replace this with coroutine
locks, let's convert the driver's external interfaces to the coroutine
versions.
We need to be careful to handle both requests that call the completion
callback directly from the calling coroutine (i.e. fully synchronous
code) and requests that involve some callback, so that we need to yield
and wait for the completion callback coming from outside the coroutine.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of calling itself recursively as the last thing, just convert
qed_aio_next_io() into a loop.
This patch is best reviewed with 'git show -w' because most of it is
just whitespace changes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
While refactoring qed_aio_write_alloc() to accomodate the change,
qed_aio_write_zero_cluster() ended up with a single line, so I chose to
inline that line and remove the function completely.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't recurse into qed_aio_next_io() and qed_aio_complete() here, but
just return an error code and let the caller handle it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
qed_commit_l2_update() is unconditionally called at the end of
qed_aio_write_l1_update(). Inline it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The GenericCB infrastructure isn't used any more. Remove it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
With this change, qed_aio_write_prefill() and qed_aio_write_postfill()
collapse into a single function. This is reflected by a rename of the
combined function to qed_aio_write_cow().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of passing the return value to a callback, return it to the
caller so that the callback can be inlined there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that this code is generally not running in coroutine context, so
this is an actual blocking synchronous operation. We'll fix this in a
moment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The qed driver serialises allocating write requests. When the active
allocation is finished, the AIO callback is called, but after this, the
next allocating request is immediately processed instead of leaving the
coroutine. Resuming another allocation request in the same request
coroutine means that the request now runs in the wrong coroutine.
The following is one of the possible effects of this: The completed
request will generally reenter its request coroutine in a bottom half,
expecting that it completes the request in bdrv_driver_pwritev().
However, if the second request actually yielded before leaving the
coroutine, the reused request coroutine is in an entirely different
place and is reentered prematurely. Not a good idea.
Let's make sure that we exit the coroutine after completing the first
request by resuming the next allocating request only with a bottom
half.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
We already have functions for doing these calculations, so let's use
them instead of doing everything by hand. This makes the code a bit
more readable.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the guest tries to write data that results on the allocation of a
new cluster, instead of writing the guest data first and then the data
from the COW regions, write everything together using one single I/O
operation.
This can improve the write performance by 25% or more, depending on
several factors such as the media type, the cluster size and the I/O
request size.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of passing a single buffer pointer to do_perform_cow_write(),
pass a QEMUIOVector. This will allow us to merge the write requests
for the COW regions and the actual data into a single one.
Although do_perform_cow_read() does not strictly need to change its
API, we're doing it here as well for consistency.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reading both COW regions requires two separate requests, but it's
perfectly possible to merge them and perform only one. This generally
improves performance, particularly on rotating disk drives. The
downside is that the data in the middle region is read but discarded.
This patch takes a conservative approach and only merges reads when
the size of the middle region is <= 16KB.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch splits do_perform_cow() into three separate functions to
read, encrypt and write the COW regions.
perform_cow() can now read both regions first, then encrypt them and
finally write them to disk. The memory allocation is also done in
this function now, using one single buffer large enough to hold both
regions.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of calling perform_cow() twice with a different COW region
each time, call it just once and make perform_cow() handle both
regions.
This patch simply moves code around. The next one will do the actual
reordering of the COW operations.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Qcow2COWRegion has two attributes:
- The offset of the COW region from the start of the first cluster
touched by the I/O request. Since it's always going to be positive
and the maximum request size is at most INT_MAX, we can use a
regular unsigned int to store this offset.
- The size of the COW region in bytes. This is guaranteed to be >= 0,
so we should use an unsigned type instead.
In x86_64 this reduces the size of Qcow2COWRegion from 16 to 8 bytes.
It will also help keep some assertions simpler now that we know that
there are no negative numbers.
The prototype of do_perform_cow() is also updated to reflect these
changes.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are using the return value of qcow2_encrypt_sectors() to detect
problems but we are throwing away the returned Error since we have no
way to report it to the user. Therefore we can simply get rid of the
local Error variable and pass NULL instead.
Alternatively we could try to figure out a way to pass the original
error instead of simply returning -EIO, but that would be more
invasive, so let's keep the current approach.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There used to be throttle_timers_{detach,attach}_aio_context() calls
in bdrv_set_aio_context(), but since 7ca7f0f6db
they are now in blk_set_aio_context().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Calling aio_poll() directly may have been fine previously, but this is
the future, man! The difference between an aio_poll() loop and
BDRV_POLL_WHILE() is that BDRV_POLL_WHILE() releases the AioContext
around aio_poll().
This allows the IOThread to run fd handlers or BHs to complete the
request. Failure to release the AioContext causes deadlocks.
Using BDRV_POLL_WHILE() partially fixes a 'savevm' hang with -object
iothread.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Call bdrv_inc/dec_in_flight() for vmstate reads/writes. This seems
unnecessary at first glance because vmstate reads/writes are done
synchronously while the guest is stopped. But we need the bdrv_wakeup()
in bdrv_dec_in_flight() so the main loop sees request completion.
Besides, it's cleaner to count vmstate reads/writes like ordinary
read/write requests.
The bdrv_wakeup() partially fixes a 'savevm' hang with -object iothread.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit_complete() can't assume that after its block_job_completed() the
job is actually immediately freed; someone else may still be holding
references. In this case, the op blockers on the intermediate nodes make
the graph reconfiguration in the completion code fail.
Call block_job_remove_all_bdrv() manually so that we know for sure that
any blockers on intermediate nodes are given up.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O9Vv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging
QAPI patches for 2017-06-09
# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
tests/qdict: check more get_try_int() cases
console: use get_uint() for "head" property
i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
numa: use get_uint() for "size" property
pnv-core: use get_uint() for "core-pir" property
pvpanic: use get_uint() for "ioport" property
auxbus: use get_uint() for "addr" property
arm: use get_uint() for "mp-affinity" property
xen: use get_uint() for "max-ram-below-4g" property
pc: use get_uint() for "hpet-intcap" property
pc: use get_uint() for "apic-id" property
pc: use get_uint() for "iobase" property
acpi: use get_uint() for "pci-hole*" properties
acpi: use get_uint() for various acpi properties
acpi: use get_uint() for "acpi-pcihp-io*" properties
platform-bus: use get_uint() for "addr" property
bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
aspeed: use {set, get}_uint() for "ram-size" property
pcihp: use get_uint() for "bsel" property
pc-dimm: make "size" property uint64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v2
iQEtBAABCAAXBQJZQyPmEBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccaWrgf/
SCAHpi4gzWbr7AN03jP16Qy/kqNik6F7LTNSqrRbvBPb3TNchDd4z44SAghK5m/r
+IlYQc20sBZ60tRHIHAUSF2WNcea2pj1v3ZVgjrI7hiJ3DXPiqqt/dAR/W/BLIDO
tAHAVF6Pnrjm9DC4d2zATLDHvcHMzWOsnePh7XcOm44REbwUr3GDg6bf2+j+5yfS
9ewmXfh8z4w1IvSn+f5B+IeCvGvJNA1D55dqcGo8Ivlg9PnElziXFaXO2s7UiLIM
mF3eTSIbJQNNN+E+0lpRpnqQiq+Txxggu61Q4f8bOTBhEOPa3etj1ydnXMVbvX25
6SUuBfGh51tyOIZOJz3GtA==
=9b+J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/docker-and-block-pull-request' into staging
# gpg: Signature made Fri 16 Jun 2017 01:18:46 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/docker-and-block-pull-request: (23 commits)
block: make accounting thread-safe
block: split BlockAcctStats creation and setup
block: introduce block_account_one_io
block: protect modification of dirty bitmaps with a mutex
migration/block: reset dirty bitmap before reading
block: introduce dirty_bitmap_mutex
block: protect tracked_requests and flush_queue with reqs_lock
block: access write_gen with atomics
block: use Stat64 for wr_highest_offset
util: add stats64 module
throttle-groups: protect throttled requests with a CoMutex
throttle-groups: do not use qemu_co_enter_next
throttle-groups: only start one coroutine from drained_begin
block: access io_plugged with atomic ops
block: access wakeup with atomic ops
block: access serialising_in_flight with atomic ops
block: access io_limits_disabled with atomic ops
block: access quiesce_counter with atomic ops
block: access copy_on_read with atomic ops
docker: Add flex and bison to centos6 image
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
I'm not trying too hard yet. Later, with multiqueue support,
this may cause mutex contention or cacheline bouncing.
Cc: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-20-pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
block_acct_destroy is called unconditionally in blk_delete, but there is
no BlockAcctStats function that is called unconditionally in blk_new.
Split block_acct_init in two, so that it will be possible to create a
QemuMutex in block_acct_init and destroy it in block_acct_cleanup.
Cc: Alberto Garcia <berto@igalia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-19-pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is the common code to account operations that produced actual I/O.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-18-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Another possibility is to use tg->lock, which we're holding anyway in
both schedule_next_request and throttle_group_co_io_limits_intercept.
This would require open-coding the CoQueue however, so I've chosen this
alternative.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-10-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Prepare for removing this function; always restart throttled requests
from coroutine context. This will matter when restarting throttled
requests will have to acquire a CoMutex.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-9-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Starting all waiting coroutines from bdrv_drain_all is unnecessary;
throttle_group_co_io_limits_intercept calls schedule_next_request as
soon as the coroutine restarts, which in turn will restart the next
request if possible.
If we only start the first request and let the coroutines dance from
there the code is simpler and there is more reuse between
throttle_group_config, throttle_group_restart_blk and timer_cb. The
next patch will benefit from this.
We also stop accessing from throttle_group_restart_blk the
blkp->throttled_reqs CoQueues even when there was no
attached throttling group. This worked but is not pretty.
The only thing that can interrupt the dance is the QEMU_CLOCK_VIRTUAL
timer when switching from one block device to the next, because the
timer is set to "now + 1" but QEMU_CLOCK_VIRTUAL might not be running.
Set that timer to point in the present ("now") rather than the future
and things work.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-8-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Rename
nbd_wr_syncv -> nbd_rwv
read_sync -> nbd_read
read_sync_eof -> nbd_read_eof
write_sync -> nbd_write
drop_sync -> nbd_drop
1. nbd_ prefix
read_sync and write_sync are already shared, so it is good to have a
namespace prefix. drop_sync will be shared, and read_sync_eof is
related to read_sync, so let's rename them all.
2. _sync suffix
_sync is related to the fact that nbd_wr_syncv doesn't return if a
write to socket returns EAGAIN. The first implementation of
nbd_wr_syncv (was wr_sync in 7a5ca8648b) just loops while getting
EAGAIN, the current implementation yields in this case.
Why we want to get rid of it:
- it is normal for r/w functions to be synchronous, so having an
additional suffix for it looks redundant (contrariwise, we have
_aio suffix for async functions)
- _sync suffix in block layer is used when function does flush (so
using it for other thing is confusing a bit)
- keep function names short after adding nbd_ prefix
3. for nbd_wr_syncv let's use more common notation 'rw'
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170602150150.258222-2-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When enabling option parsing and blockdev-add for iscsi, we removed the
'filename' option. Unfortunately, this was a bit optimistic, as
previous versions of QEMU allowed the use of the option in backing
filenames via json. This means that without parsing this option, we
cannot open existing images that used to work fine.
See bug: https://bugzilla.redhat.com/show_bug.cgi?id=1457088
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 0789ab6c32814ab4b6896707d378804bd4424c65.1497444637.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
When enabling option parsing and blockdev-add for rbd, we removed the
'filename' option. Unfortunately, this was a bit optimistic, as
previous versions of QEMU allowed the use of the option in backing
filenames via json. This means that without parsing this option, we
cannot open existing images that used to work fine.
See bug: https://bugzilla.redhat.com/show_bug.cgi?id=1457088
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 937dc9fde348d13311eb8e23444df3bc3190b612.1497444637.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
In qemu_gluster_parse_json(), the call to qdict_array_entries()
could return a negative error code, which we were ignoring
because we assigned the result to an unsigned variable.
Fix this by using the 'int' type instead, which matches the
return type of qdict_array_entries() and also the type
we use for the loop enumeration variable 'i'.
(Spotted by Coverity, CID 1360960.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1496682098-1540-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Jeff Cody <jcody@redhat.com>
Coverity points out that the code path in qcow_create() for
the magic "fat:" backing file name leaks the memory used to
store the filename (CID 1307771). Free the memory before
we overwrite the pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The final bdrv_set_backing_hd() could be working on already freed nodes
because the commit job drops its references (through BlockBackends) to
both overlay_bs and top already a bit earlier.
One way to trigger the bug is hot unplugging a disk for which
blockdev_mark_auto_del() cancels the block job.
Fix this by taking BDS-level references while we're still using the
nodes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
blk->name isn't an array, but a pointer that can be NULL. Checking for
an anonymous BB must involve a NULL check first, otherwise we get
crashes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
NBD is not thread safe, because it accesses s->in_flight without
a CoMutex. Fixing this will be required for multiqueue.
CoQueue doesn't have spurious wakeups but, when another coroutine can
run between qemu_co_queue_next's wakeup and qemu_co_queue_wait's
re-locking of the mutex, the wait condition can become false and
a loop is necessary.
In fact, it turns out that the loop is necessary even without this
multi-threaded scenario. A particular sequence of coroutine wakeups
is happening ~80% of the time when starting a guest with qcow2 image
served over NBD (i.e. qemu-nbd --format=raw, and QEMU's -drive option
has -format=qcow2). This patch fixes that issue too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move to modern errp scheme from just LOGging errors.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170526110913.89098-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Will be used in following patch to provide actual error message in
some cases.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170516094533.6160-4-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add missing support for "preallocation=falloc" to the Gluster block
driver. This change bases its logic on that of block/file-posix.c and
removed the gluster_supports_zerofill() and qemu_gluster_zerofill()
functions in favour of #ifdef checks in an easy to read
switch-statement.
Both glfs_zerofill() and glfs_fallocate() have been introduced with
GlusterFS 3.5.0 (pkg-config glusterfs-api = 6). A #define for the
availability of glfs_fallocate() has been added to ./configure.
Reported-by: Satheesaran Sundaramoorthi <sasundar@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Message-id: 20170528063114.28691-1-ndevos@redhat.com
URL: https://bugzilla.redhat.com/1450759
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=kkU0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 29 May 2017 03:34:59 PM BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* kwolf/tags/for-upstream:
block/file-*: *_parse_filename() and colons
block: Fix backing paths for filenames with colons
block: Tweak error message related to qemu-img amend
qemu-img: Fix leakage of options on error
qemu-img: copy *key-secret opts when opening newly created files
qemu-img: introduce --target-image-opts for 'convert' command
qemu-img: fix --image-opts usage with dd command
qemu-img: add support for --object with 'dd' command
qemu-img: Fix documentation of convert
qcow2: remove extra local_error variable
mirror: Drop permissions on s->target on completion
nvme: Add support for Controller Memory Buffers
iotests: 147: Don't test inet6 if not available
qemu-iotests: Test streaming with missing job ID
stream: fix crash in stream_start() when block_job_create() fails
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The file drivers' *_parse_filename() implementations just strip the
optional protocol prefix off the filename. However, for e.g.
"file:foo:bar", this would lead to "foo:bar" being stored as the BDS's
filename which looks like it should be managed using the "foo" protocol.
This is especially troublesome if you then try to resolve a backing
filename based on "foo:bar".
This issue can only occur if the stripped part is a relative filename
("file:/foo:bar" will be shortened to "/foo:bar" and having a slash
before the first colon means that "/foo" is not recognized as a protocol
part). Therefore, we can easily fix it by prepending "./" to such
filenames.
Before this patch:
$ ./qemu-img create -f qcow2 backing.qcow2 64M
Formatting 'backing.qcow2', fmt=qcow2 size=67108864 encryption=off
cluster_size=65536 lazy_refcounts=off refcount_bits=16
$ ./qemu-img create -f qcow2 -b backing.qcow2 file🔝image.qcow2
Formatting 'file🔝image.qcow2', fmt=qcow2 size=67108864
backing_file=backing.qcow2 encryption=off cluster_size=65536
lazy_refcounts=off refcount_bits=16
$ ./qemu-io file🔝image.qcow2
can't open device file🔝image.qcow2: Could not open backing file:
Unknown protocol 'top'
After this patch:
$ ./qemu-io file🔝image.qcow2
[no error]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170522195217.12991-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When converting a 1.1 image down to 0.10, qemu-iotests 060 forces
a contrived failure where allocating a cluster used to replace a
zero cluster reads unaligned data. Since it is a zero cluster
rather than a data cluster being converted, changing the error
message to match our earlier change in 'qcow2: Make distinction
between zero cluster types obvious' is worthwhile.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170508171302.17805-1-eblake@redhat.com
[mreitz: Commit message fixes]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit d7086422b1 added a local_err
variable global to the qcow2_amend_options() function, so there's no
need to have this other one.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170511150337.21470-1-berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This fixes an assertion failure that was triggered by qemu-iotests 129
on some CI host, while the same test case didn't seem to fail on other
hosts.
Essentially the problem is that the blk_unref(s->target) in
mirror_exit() doesn't necessarily mean that the BlockBackend goes away
immediately. It is possible that the job completion was triggered nested
in mirror_drain(), which looks like this:
BlockBackend *target = s->target;
blk_ref(target);
blk_drain(target);
blk_unref(target);
In this case, the write permissions for s->target are retained until
after blk_drain(), which makes removing mirror_top_bs fail for the
active commit case (can't have a writable backing file in the chain
without the filter driver).
Explicitly dropping the permissions first means that the additional
reference doesn't hurt and the job can complete successfully even if
called from the nested blk_drain().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The code that tries to reopen a BlockDriverState in stream_start()
when the creation of a new block job fails crashes because it attempts
to dereference a pointer that is known to be NULL.
This is a regression introduced in a170a91fd3,
likely because the code was copied from stream_complete().
Cc: qemu-stable@nongnu.org
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On current released versions of glusterfs, glfs_lseek() will sometimes
return invalid values for SEEK_DATA or SEEK_HOLE. For SEEK_DATA and
SEEK_HOLE, the returned value should be >= the passed offset, or < 0 in
the case of error:
LSEEK(2):
off_t lseek(int fd, off_t offset, int whence);
[...]
SEEK_HOLE
Adjust the file offset to the next hole in the file greater
than or equal to offset. If offset points into the middle of
a hole, then the file offset is set to offset. If there is no
hole past offset, then the file offset is adjusted to the end
of the file (i.e., there is an implicit hole at the end of
any file).
[...]
RETURN VALUE
Upon successful completion, lseek() returns the resulting
offset location as measured in bytes from the beginning of the
file. On error, the value (off_t) -1 is returned and errno is
set to indicate the error
However, occasionally glfs_lseek() for SEEK_HOLE/DATA will return a
value less than the passed offset, yet greater than zero.
For instance, here are example values observed from this call:
offs = glfs_lseek(s->fd, start, SEEK_HOLE);
if (offs < 0) {
return -errno; /* D1 and (H3 or H4) */
}
start == 7608336384
offs == 7607877632
This causes QEMU to abort on the assert test. When this value is
returned, errno is also 0.
This is a reported and known bug to glusterfs:
https://bugzilla.redhat.com/show_bug.cgi?id=1425293
Although this is being fixed in gluster, we still should work around it
in QEMU, given that multiple released versions of gluster behave this
way.
This patch treats the return case of (offs < start) the same as if an
error value other than ENXIO is returned; we will assume we learned
nothing, and there are no holes in the file.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Message-id: 87c0140e9407c08f6e74b04131b610f2e27c014c.1495560397.git.jcody@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Remove use of block_job_pause/resume from outside blockjob.c, thus
making them static. The new functions are used by the block layer,
so place them in blockjob_int.h.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20170508141310.8674-5-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Outside blockjob.c, block_job_unref is only used when a block job fails
to start, and block_job_ref is not used at all. The reference counting
thus is pretty well hidden. Introduce a separate function to be used
by block jobs; because block_job_ref and block_job_unref now become
static, move them earlier in blockjob.c.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20170508141310.8674-4-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This files don't use any function from migration.h, so drop it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
This allows us to remove lots of includes of migration/migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Instead, put the CURLAIOCB on a wait list and yield; curl_clean_state will
wake the corresponding coroutine.
Because of CURL's callback-based structure, we cannot easily convert
everything to CoMutex/CoQueue; keeping the QemuMutex is simpler. However,
CoQueue is a simple wrapper around a linked list, so we can easily
use QSIMPLEQ and open-code a CoQueue, protected by the BDRVCURLState
QemuMutex instead of a CoMutex.
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-8-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This is pretty simple. The bottom half goes away because, unlike
bdrv_aio_readv, coroutine-based read can return immediately without
yielding. However, for simplicity I kept the former bottom half
handler in a separate function.
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-7-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This is in preparation for the conversion from bdrv_aio_readv to
bdrv_co_preadv, and it also requires changing some of the size_t values
to uint64_t. This was broken before for disks > 2TB, but now it would
break at 4GB.
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-6-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
If curl_easy_init fails, a CURLState is left with s->in_use = 1. Split
curl_init_state in two, so that we can distinguish the two failures and
call curl_clean_state if needed.
While at it, simplify curl_find_state, removing a dummy loop. The
aio_poll loop is moved to the sole caller that needs it.
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-5-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The curl driver has a ugly hack where, if it cannot find an empty CURLState,
it just uses aio_poll to wait for one to be empty. This is probably
buggy when used together with dataplane, and the simplest way to fix it
is to use coroutines instead.
A more immediate effect of the bug however is that it can cause a
recursive call to curl_readv_bh_cb and recursively taking the
BDRVCURLState mutex. This causes a deadlock.
The fix is to unlock the mutex around aio_poll, but for cleanliness we
should also take the mutex around all calls to curl_init_state, even if
reaching the unlock/lock pair is impossible. The same is true for
curl_clean_state.
Reported-by: Kun Wei <kuwei@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170515100059.15795-4-pbonzini@redhat.com
Cc: qemu-stable@nongnu.org
Cc: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
All curl callbacks go through curl_multi_do, and hence are called with
s->mutex held. Note that with comments, and make curl_read_cb drop the
lock before invoking the callback.
Likewise for curl_find_buf, where the callback can be invoked by the
caller.
Cc: qemu-stable@nongnu.org
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-3-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
curl_clean_state should only be called after all AIOCBs have been
completed. This is not so obvious for the call from curl_detach_aio_context,
so assert that.
Cc: qemu-stable@nongnu.org
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170515100059.15795-2-pbonzini@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Since cookies can contain sensitive data (session ID, etc ...) it is
desired to hide them from the prying eyes of users. Add a possibility to
pass them via the secret infrastructure.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1447413
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: f4a22cdebdd0bca6a13a43a2a6deead7f2ec4bb3.1493906281.git.pkrempa@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Since we are already in coroutine context during the body of
bdrv_co_get_block_status(), we can shave off a few layers of
wrappers when recursing to query the protocol when a format driver
returned BDRV_BLOCK_RAW.
Note that we are already using the correct recursion later on in
the same function, when probing whether the protocol layer is sparse
in order to find out if we can add BDRV_BLOCK_ZERO to an existing
BDRV_BLOCK_DATA|BDRV_BLOCK_OFFSET_VALID.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170504173745.27414-1-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Passing a byte offset, but sector count, when we ultimately
want to operate on cluster granularity, is madness. Clean up
the external interfaces to take both offset and count as bytes,
while still keeping the assertion added previously that the
caller must align the values to a cluster. Then rename things
to make sure backports don't get confused by changed units:
instead of qcow2_discard_clusters() and qcow2_zero_clusters(),
we now have qcow2_cluster_discard() and qcow2_cluster_zeroize().
The internal functions still operate on clusters at a time, and
return an int for number of cleared clusters; but on an image
with 2M clusters, a single L2 table holds 256k entries that each
represent a 2M cluster, totalling well over INT_MAX bytes if we
ever had a request for that many bytes at once. All our callers
currently limit themselves to 32-bit bytes (and therefore fewer
clusters), but by making this function 64-bit clean, we have one
less place to clean up if we later improve the block layer to
support 64-bit bytes through all operations (with the block layer
auto-fragmenting on behalf of more-limited drivers), rather than
the current state where some interfaces are artificially limited
to INT_MAX at a time.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-13-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We already audited (in commit 0c1bd469) that qcow2_discard_clusters()
is only passed cluster-aligned start values; but we can further
tighten the assertion that the only unaligned end value is at EOF.
Recent commits have taken advantage of an unaligned tail cluster,
for both discard and write zeroes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-12-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We've already improved discards to operate efficiently on the tail
of an unaligned qcow2 image; it's time to make a similar improvement
to write zeroes. The special case is only valid at the tail
cluster of a file, where we must recognize that any sectors beyond
the image end would implicitly read as zero, and therefore should
not penalize our logic for widening a partial cluster into writing
the whole cluster as zero.
However, note that for now, the special case of end-of-file is only
recognized if there is no backing file, or if the backing file has
the same length; that's because when the backing file is shorter
than the active layer, we don't have code in place to recognize
that reads of a sector unallocated at the top and beyond the backing
end-of-file are implicitly zero. It's not much of a real loss,
because most people don't use images that aren't cluster-aligned,
or where the active layer is a different size than the backing
layer (especially where the difference falls within a single cluster).
Update test 154 to cover the new scenarios, using two images of
intentionally differing length.
While at it, fix the test to gracefully skip when run as
./check -qcow2 -o compat=0.10 154
since the older format lacks zero clusters already required earlier
in the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-11-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Similar to discard_single_l2(), we should try to avoid dirtying
the L2 cache when the cluster we are changing already has the
right characteristics.
Note that by the time we get to zero_single_l2(), BDRV_REQ_MAY_UNMAP
is a requirement to unallocate a cluster (this is because the block
layer clears that flag if discard.* flags during open requested that
we never punch holes - see the conversation around commit 170f4b2e,
https://lists.gnu.org/archive/html/qemu-devel/2016-09/msg07306.html).
Therefore, this patch can only reuse a zero cluster as-is if either
unmapping is not requested, or if the zero cluster was not associated
with an allocation.
Technically, there are some cases where an unallocated cluster
already reads as all zeroes (namely, when there is no backing file
[easy: check bs->backing], or when the backing file also reads as
zeroes [harder: we can't check bdrv_get_block_status since we are
already holding the lock]), where the guest would not immediately see
a difference if we left that cluster unallocated. But if the user
did not request unmapping, leaving an unallocated cluster is wrong;
and even if the user DID request unmapping, keeping a cluster
unallocated risks a subtle semantic change of guest-visible contents
if a backing file is later added, and it is not worth auditing
whether all internal uses such as mirror properly avoid an unmap
request. Thus, this patch is intentionally limited to just clusters
that are already marked as zero.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-8-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Treat plain zero clusters differently from allocated ones, so that
we can simplify the logic of checking whether an offset is present.
Do this by splitting QCOW2_CLUSTER_ZERO into two new enums,
QCOW2_CLUSTER_ZERO_PLAIN and QCOW2_CLUSTER_ZERO_ALLOC.
I tried to arrange the enum so that we could use
'ret <= QCOW2_CLUSTER_ZERO_PLAIN' for all unallocated types, and
'ret >= QCOW2_CLUSTER_ZERO_ALLOC' for allocated types, although
I didn't actually end up taking advantage of the layout.
In many cases, this leads to simpler code, by properly combining
cases (sometimes, both zero types pair together, other times,
plain zero is more like unallocated while allocated zero is more
like normal).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170507000552.20847-7-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Although it doesn't add all that much type safety (this is C, after
all), it does add a bit of legibility to use the name QCow2ClusterType
instead of a plain int.
In particular, qcow2_get_cluster_offset() has an overloaded return
type; a QCow2ClusterType on success, and -errno on failure; keeping
the cluster type in a separate variable makes it slightly easier for
the next patch to make further computations based on the type.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170507000552.20847-6-eblake@redhat.com
[mreitz: Use the new type in two more places (one of them pulled from
the next patch)]
Signed-off-by: Max Reitz <mreitz@redhat.com>
We were throwing away the preallocation information associated with
zero clusters. But we should be matching the well-defined semantics
in bdrv_get_block_status(), where (BDRV_BLOCK_ZERO |
BDRV_BLOCK_OFFSET_VALID) informs the user which offset is reserved,
while still reminding the user that reading from that offset is
likely to read garbage.
count_contiguous_clusters_by_type() is now used only for unallocated
cluster runs, hence it gets renamed and tightened.
Making this change lets us see which portions of an image are zero
but preallocated, when using qemu-img map --output=json. The
--output=human side intentionally ignores all zero clusters, whether
or not they are preallocated.
The fact that there is no change to qemu-iotests './check -qcow2'
merely means that we aren't yet testing this aspect of qemu-img;
a later patch will add a test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-5-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Fix a couple of inconsistent indentations, before an upcoming
patch further tweaks the switch statements.
(best viewed with 'git diff -b').
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-3-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In order to keep checkpatch happy when the next patch changes
indentation, we first have to shorten some long lines. The easiest
approach is to use a new variable in place of
'offset & L2E_OFFSET_MASK', except that 'offset' is the best name
for that variable. Change '[old_]offset' to '[old_]entry' to
make room.
While touching things, also fix checkpatch warnings about unusual
'for' statements.
Suggested by Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170507000552.20847-2-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make it easier to simulate various unusual hardware setups (for
example, recent commits 3482b9b and b8d0a98 affect the Dell
Equallogic iSCSI with its 15M preferred and maximum unmap and
write zero sizing, or b2f95fe deals with the Linux loopback
block device having a max_transfer of 64k), by allowing blkdebug
to wrap any other device with further restrictions on various
alignments.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-9-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Rather than store into a local variable, then copy to the struct
if the value is valid, then reporting errors otherwise, it is
simpler to just store into the struct and report errors if the
value is invalid. This however requires that the struct store
a 64-bit number, rather than a narrower type. Likewise, setting
a sane errno value in ret prior to the sequence of parsing and
jumping to out: on error makes it easier for the next patch to
add a chain of similar checks.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170429191419.30051-8-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In order to test the effects of artificial geometry constraints
on operations like write zero or discard, we first need blkdebug
to manage these actions. It also allows us to inject errors on
those operations, just like we can for read/write/flush.
We can also test the contract promised by the block layer; namely,
if a device has specified limits on alignment or maximum size,
then those limits must be obeyed (for now, the blkdebug driver
merely inherits limits from whatever it is wrapping, but the next
patch will further enhance it to allow specific limit overrides).
This patch intentionally refuses to service requests smaller than
the requested alignments; this is because an upcoming patch adds
a qemu-iotest to prove that the block layer is correctly handling
fragmentation, but the test only works if there is a way to tell
the difference at artificial alignment boundaries when blkdebug is
using a larger-than-default alignment. If we let the blkdebug
layer always defer to the underlying layer, which potentially has
a smaller granularity, the iotest will be thwarted.
Tested by setting up an NBD server with export 'foo', then invoking:
$ ./qemu-io
qemu-io> open -o driver=blkdebug blkdebug::nbd://localhost:10809/foo
qemu-io> d 0 15M
qemu-io> w -z 0 15M
Pre-patch, the server never sees the discard (it was silently
eaten by the block layer); post-patch it is passed across the
wire. Likewise, pre-patch the write is always passed with
NBD_WRITE (with 15M of zeroes on the wire), while post-patch
it can utilize NBD_WRITE_ZEROES (for less traffic).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-7-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Rather than repeat the logic at each caller of checking if a Rule
exists that warrants an error injection, fold that logic into
inject_error(); and rename it to rule_check() for legibility.
This will help the next patch, which adds two more callers that
need to check rules for the potential of injecting errors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-6-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commits 04ed95f4 and 1a62d0ac updated the block layer to auto-fragment
any I/O to fit within device boundaries. Additionally, when using a
minimum alignment of 4k, we want to ensure the block layer does proper
read-modify-write rather than requesting I/O on a slice of a sector.
Let's enforce that the contract is obeyed when using blkdebug. For
now, blkdebug only allows alignment overrides, and just inherits other
limits from whatever device it is wrapping, but a future patch will
further enhance things.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-5-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that the block layer takes care to request a lot less permissions
for inactive nodes, the special-casing in file-posix isn't necessary any
more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With image locking, permissions affect other qemu processes as well. We
want to be sure that the destination can run, so let's drop permissions
on the source when migration completes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of manually calling blk_resume_after_migration() in migration
code after doing bdrv_invalidate_cache_all(), integrate the BlockBackend
activation with cache invalidation into a single function. This is
achieved with a new callback in BdrvChildRole that is called by
bdrv_invalidate_cache_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In discard_single_l2(), we completely discard normal clusters instead of
simply turning them into preallocated zero clusters. That means we
should probably do the same with such preallocated zero clusters:
Discard them instead of keeping them allocated.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just freeing preallocated zero clusters and completely
allocating them from scratch, reuse them.
We cannot do this in handle_copied(), however, since this is a COW
operation. Therefore, we have to add the new logic to handle_alloc() and
simply return the existing offset if it exists. The only catch is that
we have to convince qcow2_alloc_cluster_link_l2() not to free the old
clusters (because we have reused them).
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When calculating the number of reftable entries, we should actually use
the number of refblocks and not (wrongly[1]) re-calculate it.
[1] "Wrongly" means: Dividing the number of clusters by the number of
entries per refblock and rounding down instead of up.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This extends the permission bits of op blocker API to external using
Linux OFD locks.
Each permission in @perm and @shared_perm is represented by a locked
byte in the image file. Requesting a permission in @perm is translated
to a shared lock of the corresponding byte; rejecting to share the same
permission is translated to a shared lock of a separate byte. With that,
we use 2x number of bytes of distinct permission types.
virtlockd in libvirt locks the first byte, so we do locking from a
higher offset.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We share the same set of QAPI options with file-posix, but locking is
not supported here. So error out if it is specified as 'on' for now.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Making this option available even before implementing it will let
converting tests easier: in coming patches they can specify the option
already when necessary, before we actually write code to lock the
images.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----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=R5f2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'danpb/tags/pull-qcrypto-2017-05-09-1' into staging
Merge qcrypto 2017/05/09 v1
# gpg: Signature made Tue 09 May 2017 09:43:47 AM EDT
# gpg: using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* danpb/tags/pull-qcrypto-2017-05-09-1:
crypto: qcrypto_random_bytes() now works on windows w/o any other crypto libs
crypto: move 'opaque' parameter to (nearly) the end of parameter list
List SASL config file under the cryptography maintainer's realm
Default to GSSAPI (Kerberos) instead of DIGEST-MD5 for SASL
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Previous commit moved 'opaque' to be the 2nd parameter in the list:
commit 375092332e
Author: Fam Zheng <famz@redhat.com>
Date: Fri Apr 21 20:27:02 2017 +0800
crypto: Make errp the last parameter of functions
Move opaque to 2nd instead of the 2nd to last, so that compilers help
check with the conversion.
this puts it back to the 2nd to last position.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
inet_parse() returns a newly allocated InetSocketAddress. Lift the
allocation from inet_parse() into its caller socket_parse() to prepare
for flattening SocketAddress.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Straightforward rebase]
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have macros in place to make it less verbose to add a subtype
of QObject to both QDict and QList. While we have made cleanups
like this in the past (see commit fcfcd8ffc, for example), having
it be automated by Coccinelle makes it easier to maintain.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then I verified that no manual touchups were required.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
BDRVReplicationState.replication_state is a name with a bit of
duplication, plus it could be an enum like BDRVReplicationState.mode,
which is more readable and also more straightforward in a debugger.
Rename it, and improve the type while at it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As mentioned in commit 0c1bd46, we ignored requests to
discard the trailing cluster of an unaligned image. While
discard is an advisory operation from the guest standpoint,
(and we are therefore free to ignore any request), our
qcow2 implementation exploits the fact that a discarded
cluster reads back as 0. As long as we discard on cluster
boundaries, we are fine; but that means we could observe
non-zero data leaked at the tail of an unaligned image.
Enhance iotest 66 to cover this case, and fix the implementation
to honor a discard request on the final partial cluster.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170407013709.18440-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add missing error messages for the block driver implementations of
.bdrv_truncate(); drop the generic one from block.c's bdrv_truncate().
Since one of these changes touches a mis-indented block in
block/file-posix.c, this patch fixes that coding style issue along the
way.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-5-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch makes vhdx_create() always set errp in case of an error. It
also adds errp parameters to vhdx_create_bat() and
vhdx_create_new_region_table() so we can pass on the error object
generated by blk_truncate() as of a future commit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170328205129.15138-2-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
tail_padding_bytes is calculated wrong. F.e. for
offset = 0
bytes = 2048
align = 512
we will have tail_padding_bytes = 512 which is definitely wrong. The patch
fixes that arithmetics.
Fortunately this problem is harmless, we will have 1 extra allocation and
free thus there is no need to put this into stable. The problem is here
from the very beginning.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer takes care of removing the bs->file child if the block
driver's bdrv_open()/bdrv_file_open() implementation fails. The block
driver therefore does not need to do so, and indeed should not unless it
sets bs->file to NULL afterwards -- because if this is not done, the
bdrv_unref_child() in bdrv_open_inherit() will dereference the freed
memory block at bs->file afterwards, which is not good.
We can now decide whether to add a "bs->file = NULL;" after each of the
offending bdrv_unref_child() invocations, or just drop them altogether.
The latter is simpler, so let's do that.
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reported by Coverity. We already use bs in bdrv_inc_in_flight before
checking for NULL. It is unnecessary as all callers pass non-NULL bs, so
drop it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit e3e0003a8f.
This commit was necessary for the 2.9 release because we were unable to
fix the underlying issue(s) in time. However, we will be for 2.10.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_name() is not modifying data passed to it through pointer and it
returns also a pointer to const so the argument can be made const for
code safeness.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds support for reopen in rbd, for changing between r/w and r/o.
Note, that this is only a flag change, but we will block a change from
r/o to r/w if we are using an RBD internal snapshot.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: d4e87539167ec6527d44c97b164eabcccf96e4f3.1491597120.git.jcody@redhat.com
Update 'clientname' to be 'user', which tracks better with both
the QAPI and rados variable naming.
Update 'name' to be 'image_name', as it indicates the rbd image.
Naming it 'image' would have been ideal, but we are using that for
the rados_image_t value returned by rbd_open().
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: b7ec1fb2e1cf36f9b6911631447a5b0422590b7d.1491597120.git.jcody@redhat.com
A few block drivers will set the BDS read_only flag from their
.bdrv_open() function. This means the bs->read_only flag could
be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ
flag check occurs prior to the call to bdrv->bdrv_open().
This adds an error return to bdrv_set_read_only(), and an error will be
return if we try to set the BDS to read_only while copy_on_read is
enabled.
This patch also changes the behavior of vvfat. Before, vvfat could
override the drive 'readonly' flag with its own, internal 'rw' flag.
For instance, this -drive parameter would result in a writable image:
"-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on"
This is not correct. Now, attempting to use the above -drive parameter
will result in an error (i.e., 'rw' is incompatible with 'readonly=on').
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
We have a helper wrapper for checking for the BDS read_only flag,
add a helper wrapper to set the read_only flag as well.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
Source code for the qnio library that this code loads can be downloaded from:
https://github.com/VeritasHyperScale/libqnio.git
Sample command line using JSON syntax:
./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0
-k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
-msg timestamp=on
'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410",
"server":{"host":"172.172.17.4","port":"9999"}}'
Sample command line using URI syntax:
qemu-img convert -f raw -O raw -n
/var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad
vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0
Sample command line using TLS credentials (run in secure mode):
./qemu-io --object
tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read
-v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999",
"vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}'
[Jeff: Modified trace-events with the correct string formatting]
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@veritas.com
