mips_cpu_reset() is used by all accelerators, and calls
msa_reset(), which is defined in msa_helper.c.
Beside msa_reset(), the rest of msa_helper.c is only useful
to the TCG accelerator. To be able to restrict this helper
file to TCG, we need to move msa_reset() out of it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-4-f4bug@amsat.org>
restore_msa_fp_status() is declared inlined in fpu_helper.h,
and uses the ieee_rm[] array. Therefore any code calling
restore_msa_fp_status() must have access to this ieee_rm[] array.
kvm_mips_get_fpu_registers(), which is in target/mips/kvm.c,
calls restore_msa_fp_status.
Except this tiny array, the rest of fpu_helper.c is only useful
for the TCG accelerator.
To be able to restrict fpu_helper.c to TCG, we need to move the
ieee_rm[] array to a new source file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-3-f4bug@amsat.org>
We already have the mips_tcg_ss source set for TCG-specific files,
use it for mxu_translate.c and tx79_translate.c to simplify a bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-2-f4bug@amsat.org>
To avoid callers to emit dead code if check_cp0_enabled()
raise an exception, let it return a boolean value, whether
CP0 is enabled or not.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210420193453.1913810-4-f4bug@amsat.org>
When running with '-d unimp' all MTHC0 opcode executed
are logged as unimplemented... Add the proper 'return'
statement missed from commit 5204ea79ea.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210422081055.2349216-1-f4bug@amsat.org>
The CACHEE opcode "requires CP0 privilege".
The pseudocode checks in the ISA manual is:
if is_eva and not C0.Config5.EVA:
raise exception('RI')
if not IsCoprocessor0Enabled():
raise coprocessor_exception(0)
Add the missing checks.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210420175426.1875746-1-f4bug@amsat.org>
Since commit 078778c5a5 ("piix4: Add an i8259 Interrupt Controller")
the TYPE_PIIX4_PCI_DEVICE exposes the ISA input IRQs as "isa" alias.
Use this alias to get IRQ for the power management PCI function.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210324182902.692419-1-f4bug@amsat.org>
Rather than force all structure members to be 'int',
allow the type of the member to be specified.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow '64' to be specified for the instruction width command line params
and use the appropriate extract and deposit functions in that case.
This will be used to implement the new 64-bit Power ISA 3.1 instructions.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <CP2PR80MB3668E123E2EFDB0ACD3A46F1DA759@CP2PR80MB3668.lamprd80.prod.outlook.com>
[rth: Drop the change to the field type; use bitop_width instead of separate
variables for extract/deposit; use "ull" for 64-bit constants.]
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Form a hex constant of the appropriate insnwidth.
Begin using f-strings on changed lines.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When TCG is enabled, the accel/tcg/ include path is added to the
project global include search list. This accel/tcg/ directory
contains a header named "internal.h" which, while intented to
be internal to accel/tcg/, is accessible by all files compiled
when TCG is enabled. This might lead to problem with other
directories using the same "internal.h" header name:
$ git ls-files | fgrep /internal.h
accel/tcg/internal.h
include/hw/ide/internal.h
target/hexagon/internal.h
target/mips/internal.h
target/ppc/internal.h
target/s390x/internal.h
As we don't need to expose accel/tcg/ internals to the rest of
the code base, simplify by removing it from the include search
list, and include the accel/tcg/ public headers relative to the
project root search path (which is already in the generic include
search path).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210413081008.3409459-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No functional change.
Note: QAPISourceError's info parameter is Optional[] because schema.py
treats the info property of its various classes as Optional to
accommodate built-in types, which have no source. See prior commit
'qapi/error: assert QAPISourceInfo is not None'.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Keeping it in error.py will create some cyclic import problems when we
add types to the QAPISchemaParser. Callers don't need to know the
details of QAPIParseError unless they are parsing or dealing directly
with the parser, so this won't create any harsh new requirements for
callers in the general case.
Update error.py with a little docstring that gives a nod to where the
error may now be found.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Built-in stuff is not parsed from a source file, and therefore have no
QAPISourceInfo. If such None info was used for reporting an error,
built-in stuff would be broken. Programming error. Instead of reporting
a confusing error with bogus source location then, we better crash.
We currently crash only if self.col was set. Assert that self.info is
not None in order to crash reliably.
We can not yet change the type of the initializer to prove this cannot
happen at static analysis time before the remainder of the code is fully
typed.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It's already treated as optional, with one direct caller and some
subclass callers passing 'None'. Make it officially optional, which
requires moving the position of the argument to come after all required
parameters.
QAPISemError becomes functionally identical to QAPISourceError. Keep the
name to preserve its semantic meaning and avoid code churn, but remove
the now-useless __init__ wrapper.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Missed in commit 2cae67bcb5 "qapi: Use super() now we have Python 3".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210421192233.3542904-3-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename QAPIError to QAPISourceError, and then create a new QAPIError
class that serves as the basis for all of our other custom exceptions,
without specifying any class properties.
This leaves QAPIError as a package-wide error class that's suitable for
any current or future errors.
(Right now, we don't have any errors that DON'T also want to specify a
Source location, but this MAY change. In these cases, a common abstract
ancestor would be desired.)
Add docstrings to explain the intended function of each error class.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-18-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It is -- maybe -- possibly -- three nanoseconds faster.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now with more :words:!
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-16-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Per list review: qapi-code-gen.txt reserves suffixes Kind and
List only for type names, but the code rejects them for events and
commands, too.
It turns out we reject them earlier anyway: In check_name_upper() for
event names, and in check_name_lower() for command names.
Still, adjust the code for clarity over what precisely we are guarding
against.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-15-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-13-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a small rewrite to address some minor style nits.
Don't compare against the empty list to check for the empty condition, and
move the normalization forward to unify the check on the now-normalized
structure.
With the check unified, the local nested function isn't needed anymore
and can be brought down into the normal flow of the function. With the
nesting level changed, shuffle the error strings around a bit to get
them to fit in 79 columns.
Note: although ifcond is typed as Sequence[str] elsewhere, we *know* that
the parser will produce real, bona-fide lists. It's okay to check
isinstance(ifcond, list) here.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Annotations do not change runtime behavior.
This commit *only* adds annotations.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a minor adjustment that lets parameters @required and
@optional take tuple arguments, in particular (). Later patches will
make use of that.
(Iterable would also have worked, but Iterable also includes things like
generator expressions which are consumed upon iteration, which would
require a rewrite to make sure that each input was only traversed
once. Collection implies the "can re-iterate" property.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Casts are instructions to the type checker only, they aren't "safe" and
should probably be avoided in general. In this case, when we perform
type checking on a nested structure, the type of each field does not
"stick".
(See PEP 647 for an example of "type narrowing" that does "stick".
It is available in Python 3.10, so we can't use it yet.)
We don't need to assert that something is a str if we've already checked
or asserted that it is -- use a cast instead for these cases.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Prior to this commit, specifying a non-object value here causes the QAPI
parser to crash in expr.py with a stack trace with (likely) an
AttributeError when we attempt to call that value's items() method.
This member needs to be an object (Dict), and not anything else. Add a
check for this with a nicer error message, and formalize that check with
new test cases that exercise that error.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For readability purposes only, shimmy the early return upwards to the
top of the function, so cases proceed in order from least to most
complex.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
mypy isn't fond of allowing you to check for bool membership in a
collection of str elements. Guard this lookup for precisely when we were
given a name.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
mypy does not know the types of values stored in Dicts that masquerade
as objects. Help the type checker out by constraining the type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
OrderedDict is a subtype of dict, so we can check for a more general
form. These functions do not themselves depend on it being any
particular type.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The function can just use the argument from the scope above. Otherwise,
we get shadowed argument errors because the parameter name clashes with
the name of a variable already in-scope.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-3-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The linter yaps after 0825f62c84. Fix this trivial issue to restore the
linter baseline.
(Yes, ideally -- and soon -- the linter will be part of CI so we don't
clutter up the log with fixups. For now, though, the baseline is useful
for testing intermediate commits as types are added to the QAPI
library.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* hw/pci-host/gpex: Don't fault for unmapped parts of MMIO and PIO windows
* hw: add compat machines for 6.1
* Fault misaligned accesses where the architecture requires it
* Fix some corner cases of MTE faults (notably with misaligned accesses)
* Make Thumb store insns UNDEF for Rn==1111
* hw/arm/smmuv3: Support 16K translation granule
-----BEGIN PGP SIGNATURE-----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=3Wor
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210430' into staging
target-arm queue:
* hw/pci-host/gpex: Don't fault for unmapped parts of MMIO and PIO windows
* hw: add compat machines for 6.1
* Fault misaligned accesses where the architecture requires it
* Fix some corner cases of MTE faults (notably with misaligned accesses)
* Make Thumb store insns UNDEF for Rn==1111
* hw/arm/smmuv3: Support 16K translation granule
# gpg: Signature made Fri 30 Apr 2021 11:33:45 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210430: (43 commits)
hw/pci-host/gpex: Don't fault for unmapped parts of MMIO and PIO windows
hw: add compat machines for 6.1
target/arm: Enforce alignment for sve LD1R
target/arm: Enforce alignment for aa64 vector LDn/STn (single)
target/arm: Enforce alignment for aa64 vector LDn/STn (multiple)
target/arm: Use MemOp for size + endian in aa64 vector ld/st
target/arm: Enforce alignment for aa64 load-acq/store-rel
target/arm: Use finalize_memop for aa64 fpr load/store
target/arm: Use finalize_memop for aa64 gpr load/store
target/arm: Enforce alignment for VLDn/VSTn (single)
target/arm: Enforce alignment for VLDn/VSTn (multiple)
target/arm: Enforce alignment for VLDn (all lanes)
target/arm: Enforce alignment for VLDR/VSTR
target/arm: Enforce alignment for VLDM/VSTM
target/arm: Enforce alignment for SRS
target/arm: Enforce alignment for RFE
target/arm: Enforce alignment for LDM/STM
target/arm: Enforce alignment for LDA/LDAH/STL/STLH
target/arm: Enforce word alignment for LDRD/STRD
target/arm: Adjust gen_aa32_{ld, st}_i64 for align+endianness
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio_add_queue() aborts when queue_size > VIRTQUEUE_MAX_SIZE, so
vhost_user_blk_device_realize() should check this before calling it.
Simple reproducer:
qemu-system-x86_64 \
-chardev null,id=foo \
-device vhost-user-blk-pci,queue-size=4096,chardev=foo
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935014
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210413165654.50810-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For a successful conversion of an image, we must make sure that its
content doesn't change during the conversion.
A special case of this is using the same image file both as the source
and as the destination. If both input and output format are raw, the
operation would just be useless work, with other formats it is a sure
way to destroy the image. This will now fail because the image file
can't be opened a second time for the output when opening it for the
input has already acquired file locks to unshare BLK_PERM_WRITE.
Nevertheless, if there is some reason in a special case why it is
actually okay to allow writes to the image while it is being converted,
-U can still be used to force sharing all permissions.
Note that for most image formats, BLK_PERM_WRITE would already be
unshared by the format driver, so this only really makes a difference
for raw source images (but any output format).
Reported-by: Xueqiang Wei <xuwei@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210422164344.283389-3-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Normally, blk_new_open() just shares all permissions. This was fine
originally when permissions only protected against uses in the same
process because no other part of the code would actually get to access
the block nodes opened with blk_new_open(). However, since we use it for
file locking now, unsharing permissions becomes desirable.
Add a new BDRV_O_NO_SHARE flag that is used in blk_new_open() to unshare
any permissions that can be unshared.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210422164344.283389-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now, bdrv_node_check_perm() is called only with fresh cumulative
permissions, so its actually "refresh_perm".
Move permission calculation to the function. Also, drop unreachable
error message and rewrite the remaining one to be more generic (as now
we don't know which node is added and which was already here).
Add also Virtuozzo copyright, as big work is done at this point.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-37-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't have bdrv_replace_child(), so it's time for
bdrv_replace_child_safe() to take its place.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-36-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Old interfaces dropped, nobody directly calls
bdrv_child_set_perm_abort() and bdrv_child_set_perm_commit(), so we can
use personal state structure for the action and stop exploiting
BdrvChild structure. Also, drop "_safe" suffix which is redundant now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-35-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_replace_child() has only one caller, the second argument is
unused. Inline it now. This triggers deletion of some more unused
interfaces.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-34-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
