Library functions should not rely on functions that require global_qtest
(since they might get used in tests that deal with multiple states).
Commit 1999a70a05 ("Make generic virtio code independent from
global_qtest") already tried to clean the libqos virtio code, but I
missed to replace the clock_step() function. Thus change it now to
qtest_clock_step() instead.
The logic of the qvirtio_wait_config_isr() function is now pushed
to the virtio-mmio.c and virtio-pci.c files instead, since we can
get the QTestState here easily.
Message-Id: <20190904130047.25808-4-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The libqos library functions should never depend on global_qtest,
since these functions might be used in tests that track multiple
test states. Pass around a pointer to the QTestState instead.
Message-Id: <20190814195920.32023-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Library functions should not depend on global_qtest functions like
writew() and writeq(), so that they can also be used in tests that
deal with multiple QTestStates at the same time (like migration tests).
Message-Id: <20190515174328.16361-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The only remaining test that needs libqos-virtio-obj-y is drive_del-test,
which really only needs a function. Move that function to the test
and remove libqos-virtio-obj-y.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-net-pci and virtio-net-device.
Both nodes produce virtio-net, but virtio-net-pci receives
a pci-bus and overrides virtio-pci QOSGraphObject and its functions,
while virtio-net-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-console-test and tests/virtio-serial-test
in qgraph test node. This test consumes a virtio-serial interface
and checks that its function return the expected values.
Note that this test does not allocate any virtio-console or
virtio-serial structure, it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function is intended to group all the qvirtio_* functions that
start the qvirtio devices.
Applied in all tests using this combination of functions.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a 9p request is flushed (ie, cancelled) by the guest, the device
is expected to simply mark the request as used, without sending a 9p
reply (ie, without writing anything into the used buffer).
To be able to test this, we need access to the length written by the
device into the used descriptor. This patch adds a uint32_t * argument
to qvirtqueue_get_buf() and qvirtio_wait_used_elem() for this purpose.
All existing users are updated accordingly.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
We can use the drive_del test on s390x, too, to check that adding and
deleting also works fine with the virtio-ccw bus. But we have to make
sure that we use the devices with the "-ccw" suffix instead of the
"-pci" suffix for the virtio-ccw transport on s390x. Introduce a helper
function called qvirtio_get_dev_type() that returns the correct string
for the current architecture.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1504190408-11143-1-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Existing tests do not touch the virtqueue used ring. Instead they poll
the virtqueue ISR register and peek into their request's device-specific
status field.
It turns out that the virtqueue ISR register can be set to 1 more than
once for a single notification (see commit
83d768b564 "virtio: set ISR on dataplane
notifications"). This causes problems for tests that assume a 1:1
correspondence between the ISR being 1 and request completion.
Peeking at device-specific status fields is also problematic if the
device has no field that can be abused for EINPROGRESS polling
semantics. This is the case if all the field's values may be set by the
device; there's no magic constant left for polling.
It's time to process the used ring for completed requests, just like a
real virtio guest driver. This patch adds the necessary APIs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows to not have to pass bus and device for every virtio functions.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[dwg: Fix style nit]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
"vq->desc[i].addr" is a 64bit value,
so write it with writeq(), not writew().
struct vring_desc {
__virtio64 addr;
__virtio32 len;
__virtio16 flags;
__virtio16 next;
};
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1474903450-9605-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vq->avail.idx and vq->avail->ring[] are a 16bit values,
so read and write them with readw()/writew() instead of
readl()/writel().
To read/write a 16bit value with a 32bit accessor works fine
on little-endian CPU but not on big endian CPU.
[An equivalent patch for the writew() calls was also sent by
Zhang Shuai <zhangshuai13@huawei.com>.
--Stefan]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1472330054-22607-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qvirtqueue_setup() allocates the vring and virtqueue state. So far
there has been no function to free it. Callers have been using
guest_free() for the vring but forgot to free the QVirtQueue state.
This patch solves the memory leak by introducing qvirtqueue_cleanup().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The descriptor element, used, and avail vring structs are defined in
virtio_ring.h. There is no need to duplicate them in libqos virtio.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1462798061-30382-6-git-send-email-stefanha@redhat.com
Note that virtio_ring.h defines feature bits using their bit number:
#define VIRTIO_RING_F_INDIRECT_DESC 28
On the other hand libqos virtio.h uses the bit mask:
#define QVIRTIO_F_RING_INDIRECT_DESC 0x10000000
The patch makes the necessary adjustments.
I have used "1u << BITMASK" instead of "1ULL << BITMASK" because the
64-bit feature fields are not implemented in libqos virtio.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1462798061-30382-5-git-send-email-stefanha@redhat.com
Note that VIRTIO_F_ANY_LAYOUT and VIRTIO_F_NOTIFY_ON_EMPTY are bit
numbers in virtio_config.h but bit masks in qtest virtio.h. Therefore
it's necessary to change users from X to (1u << X).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1462798061-30382-4-git-send-email-stefanha@redhat.com
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Convert use of pointers in functions of virtio to uint64_t in order to make it
platform-independent.
Add casting from pointers (in PCI functions) to uint64_t and vice versa through
uintptr_t.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424812915-25728-2-git-send-email-marc.mari.barcelo@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some hosts are slow or overloaded so test execution takes a long time.
Test cases use timeouts to protect against an infinite loop stalling the
test forever (especially important in automated test setups).
Commit 6cd14054b6 ("libqos virtio:
Increase ISR timeout") increased the clock_step() value in an attempt to
lengthen the virtio interrupt wait timeout, but timeout failures are
still occuring on the Travis automated testing platform.
This is because clock_step() only affects the guest's virtual time.
Virtio requests can be bottlenecked on host disk I/O latency - which
cannot be improved by stepping the clock, so the fix was ineffective.
This patch changes the qvirtio_wait_queue_isr() and
qvirtio_wait_config_isr() timeout mechanism from loop iterations to
microseconds. This way the test case can specify an absolute 30 second
timeout. Number of loop iterations is not a reliable timeout mechanism
since the speed depends on many factors including host performance.
Tests should no longer timeout on overloaded Travis instances.
Cc: Marc Marí <marc.mari.barcelo@gmail.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio event_index feature lets the device driver tell the device
how many requests to process before raising the next interrupt.
virtio-blk-test.c tries to verify that the device does not raise an
interrupt unnecessarily.
Unfortunately the test has a race condition. It spins checking for an
interrupt up to 100 times and then assumes the request has finished. On
a slow host the I/O request could still be in flight and the test would
fail.
This patch waits for the request to complete, or until a 30-second
timeout is reached. If an interrupt is raised while waiting the test
fails since the device was not supposed to raise interrupts.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Increase the clock step to avoid Travis failure in some builds due to
overagressive timeout.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Message-id: 1410428416-5046-1-git-send-email-marc.mari.barcelo@gmail.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added avail_event and NO_NOTIFY check before notifying.
Added used_event setting.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Added MSI-X support for qtest PCI.
Added MSI-X support for virtio-pci.
Added MSI-X test case in virtio-blk-test.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add functions necessary for working with indirect descriptors.
Add test using new functions.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add status changing and feature negotiation.
Add basic virtqueue support for adding and sending virtqueue requests.
Add ISR checking.
[Squashed request endianness fix by Greg Kurz <gkurz@linux.vnet.ibm.com>
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add functions to read and write virtio header fields.
Add status bit setting in virtio-blk-device.
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
