Let branching happen and try to generate a new translation block with
an odd address. Generate a specification exception in
cpu_get_tb_cpu_state().
Reported-by: Harold Grovesteen <h.grovsteen@tx.rr.com>
Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230316164428.275147-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code uses the wrong base for relative addressing: it should use the
target instruction address and not the EXECUTE's address.
Fix by storing the target instruction address in the new CPUS390XState
member and loading it from the code generated by gen_ri2().
Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230316210751.302423-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Generate a specification exception if a reserved bit is set in the PSW
mask or if the PSW address is out of bounds dictated by the addressing
mode.
Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230315020408.384766-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
The CPNC portion of the diag318 data is erroneously reset during an
initial CPU reset caused by SIGP. Let's go ahead and relocate the
diag318_info field within the CPUS390XState struct such that it is
only zeroed during a clear reset. This way, the CPNC will be retained
for each VCPU in the configuration after the diag318 instruction
has been invoked.
The s390_machine_reset code already takes care of zeroing the diag318
data on VM resets, which also cover resets caused by diag308.
Fixes: fabdada935 ("s390: guest support for diagnose 0x318")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20211117152303.627969-1-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These are unused since commit 075e52b816 ("s390x/cpumodel:
we are always in zarchitecture mode") and it's unlikely that we
will ever need them again. So let's simply remove them now.
Message-Id: <20211015124219.1330830-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to s390_cpu_set_psw and s390_cpu_get_psw_mask at the
same time. Adjust so that they compile for user-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-2-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The definition S390_ADAPTER_SUPPRESSIBLE was moved to "cpu.h", per
suggestion of Thomas Huth. From interface design perspective, IMHO, not
a good thing as it belongs to the public interface of
css_register_io_adapters(). We did this because CONFIG_KVM requeires
NEED_CPU_H and Thomas, and other commenters did not like the
consequences of that.
Moving the interrupt related declarations to s390_flic.h was suggested
by Cornelia Huck.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210317095622.2839895-2-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the CCO bit is set, MVPG should not generate an exception but
report page translation faults via a CC code.
Create a new helper, access_prepare_nf, which can use probe_access_flags
in non-faulting mode, and then handle watchpoints.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: Added logic to still inject protection exceptions]
Signed-off-by: Thomas Huth <thuth@redhat.com>
[david: Look at env->tlb_fill_exc to determine if there was an exception]
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210315085449.34676-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Control Program Name Code (CPNC) portion of the diag318
info must be set within the SIE block of each VCPU in the
configuration. The handler will iterate through each VCPU
and dirty the diag318_info reg to be synced with KVM on a
subsequent sync_regs call.
Additionally, the diag318 info resets must be handled via
userspace. As such, QEMU will reset this value for each
VCPU during a modified clear, load normal, and load clear
reset event.
Fixes: fabdada935 ("s390: guest support for diagnose 0x318")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Message-Id: <20201113221022.257054-1-walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
DIAGNOSE 0x318 (diag318) is an s390 instruction that allows the storage
of diagnostic information that is collected by the firmware in the case
of hardware/firmware service events.
QEMU handles the instruction by storing the info in the CPU state. A
subsequent register sync will communicate the data to the hypervisor.
QEMU handles the migration via a VM State Description.
This feature depends on the Extended-Length SCCB (els) feature. If
els is not present, then a warning will be printed and the SCLP bit
that allows the Linux kernel to execute the instruction will not be
set.
Availability of this instruction is determined by byte 134 (aka fac134)
bit 0 of the SCLP Read Info block. This coincidentally expands into the
space used for CPU entries, which means VMs running with the diag318
capability may not be able to read information regarding all CPUs
unless the guest kernel supports an extended-length SCCB.
This feature is not supported in protected virtualization mode.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20200915194416.107460-9-walling@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Protected guests save the instruction control blocks in the SIDA
instead of QEMU/KVM directly accessing the guest's memory.
Let's introduce new functions to access the SIDA.
The memops for doing so are available with KVM_CAP_S390_PROTECTED, so
let's check for that.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200319131921.2367-8-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's rename PSW_MASK_ESA_ADDR to PSW_MASK_SHORT_ADDR because we're
not working with a ESA PSW which would not support the extended
addressing bit. Also let's actually use it.
Additionally we introduce PSW_MASK_SHORT_CTRL and use it throughout
the codebase.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200227092341.38558-1-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The generated functions aside from *_real are unused.
The *_real functions have a couple of users in mem_helper.c;
use *_mmuidx_ra instead, with MMU_REAL_IDX.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Use *_mmuidx_ra directly, without intermediate macros.
We need to actually fetch the cpu mask and set it. As we invert the
short psw indication in the mask, SIE will report a specification
exception, if it wasn't present in the reset psw.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20191129142025.21453-2-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We neglected to clean up pending interrupts and emergency signals;
fix that.
Message-Id: <20191206135404.16051-1-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
As it turns out we need to clear the ri controls and PSW enablement
bit to be architecture compliant.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20191203132813.2734-4-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's move the intial reset into the reset handler and cleanup
afterwards.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20191128083723.11937-1-frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's start moving the cpu reset functions into a single function with
a switch/case, so we can later use fallthroughs and share more code
between resets.
This patch introduces the reset function by renaming cpu_reset().
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20191127175046.4911-3-frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This setting is no longer used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-19-richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
This setting is no longer used.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-16-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
This is no longer used, and many of the existing uses -- particularly
within hw/s390x -- seem questionable.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191001171614.8405-4-richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Use ILEN_UNWIND to signal that we have in fact that cpu_restore_state
will have been called by the time we arrive in do_program_interrupt.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20191001171614.8405-2-richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
IEP support in the mmu is fairly easy. Set the right permissions for TLB
entries and properly report an exception.
Make sure to handle EDAT-2 by setting bit 56/60/61 of the TEID (TEC) to
the right values.
Let's keep s390_cpu_get_phys_page_debug() working even if IEP is
active. Switch MMU_DATA_LOAD - this has no other effects any more as the
ASC to be used is now fully selected outside of mmu_translate().
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's use consistent names for the region/section/page table entries and
for the macros to extract relevant parts from virtual address. Make them
match the definitions in the PoP - e.g., how the relevant bits are actually
called.
Introduce defines for all bits declared in the PoP. This will come in
handy in follow-up patches.
Add a note where additional information about s390x and the used
definitions can be found.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Although we basically ignore the index all the time for CONFIG_USER_ONLY,
let's simply skip all the checks and always return MMU_USER_IDX in
cpu_mmu_index() and get_mem_index().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Instructions are always fetched from primary address space, except when
in home address mode. Perform the selection directly in cpu_mmu_index().
get_mem_index() is only used to perform data access, instructions are
fetched via cpu_lduw_code(), which translates to cpu_mmu_index(env, true).
We don't care about restricting the access permissions of the TLB
entries anymore, as we no longer enter PRIMARY entries into the
SECONDARY MMU. Cleanup related code a bit.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190816084708.602-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We declare incomplete struct VMStateDescription in a couple of places
so we don't have to include migration/vmstate.h for the typedef.
That's fine with me. However, the next commit will drop
migration/vmstate.h from a massive number of compiles. Move the
typedef to qemu/typedefs.h now, so I don't have to insert struct in
front of VMStateDescription all over the place then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-15-armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
This macro is now always empty, so remove it. This leaves the
entire contents of CPUArchState under the control of the guest
architecture.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace s390_env_get_cpu with env_archcpu. The combination
CPU(s390_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, into this new file move TARGET_LONG_BITS,
TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS,
TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES.
Include this new file from exec/cpu-defs.h.
This now removes the somewhat odd requirement that target/arch/cpu.h
defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the
bulk of the includes within target/arch/cpu.h to the top.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Handling is similar to data exceptions, however we can always store the
VXC into the lowore and the FPC:
z14 PoP, 6-20, "Vector-Exception Code"
When a vector-processing exception causes a pro-
gram interruption, a vector-exception code (VXC) is
stored at location 147, and zeros are stored at loca-
tions 144-146. The VXC is also placed in the DXC
field of the floating-point-control (FPC) register if bit
45 of control register 0 is one. When bit 45 of control
register 0 is zero and bit 46 of control register 0 is
one, the DXC field of the FPC register and the con-
tents of storage at location 147 are unpredictable.
Signed-off-by: David Hildenbrand <david@redhat.com>
CPU_DoubleU is primarily used to reinterpret between integer and floats.
We don't really need this functionality. So let's just keep it simple
and use an uint64_t.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
11e2bfef79 ("tcg/i386: Use MOVDQA for TCG_TYPE_V128 load/store")
revealed that the vregs are not aligned to 16 bytes. Align them to
16 bytes, to avoid segfault'ing on x86.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Right now we configure the pagesize quite early, when initializing KVM.
This is long before system memory is actually allocated via
memory_region_allocate_system_memory(), and therefore memory backends
marked as mapped.
Instead, let's configure the maximum page size after initializing
memory in s390_memory_init(). cap_hpage_1m is still properly
configured before creating any CPUs, and therefore before configuring
the CPU model and eventually enabling CMMA.
This is not a fix but rather a preparation for the future, when initial
memory might reside on memory backends (not the case for s390x right now)
We will replace qemu_getrampagesize() soon by a function that will always
return the maximum page size (not the minimum page size, which only
works by pure luck so far, as there are no memory backends).
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190417113143.5551-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Check them at a central point. We'll use a new instruction flag to
flag all vector instructions (IF_VEC) and handle it very similar to
AFP, whereby we use another unused position in the PSW mask to store
the state of vector register enablement per translation block.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The license information in these files is rather confusing. The text
declares LGPL first, but then says that contributions after 2012 are
licensed under the GPL instead. How should the average user who just
downloaded the release tarball know which part is now GPL and which
is LGPL?
Looking at the text of the LGPL (see COPYING.LIB in the top directory),
the license clearly states how this should be done instead:
"3. You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do
this, you must alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public License, version 2,
instead of to this License."
Thus let's clean up the confusing statements and use the proper GPL
text only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1549456893-16589-1-git-send-email-thuth@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
MTTCG should be enabled by default whenever the memory model allows
it. s390x was missing its definition of TCG_GUEST_DEFAULT_MO meaning
the user had to manually specify --accel tcg,thread=multi.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Message-Id: <20190118171848.27332-1-alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We exit the TB when changing the control registers, so just like PSW
bits, this should always be consistent for a TB.
Using the PSW bit semantic makes things a lot easier compared to
manually defining the spare, shifted bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
