Commit Graph

4996 Commits

Author SHA1 Message Date
Kevin Wolf
b171271a50 vmdk: Fix backing file handling
Instead of storing the backing file in its own BlockDriverState, VMDK uses the
BlockDriverState of the raw image file it opened. This is wrong and breaks
functions that access the backing file or protocols. This fix replaces all
occurrences of s->hd->backing_* with bs->backing_*.

This fixes qemu-iotests failure in 020 (Commit changes to backing file).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-22 10:58:47 -05:00
Blue Swirl
0bf9e31af1 Fix most warnings (errors with -Werror) when debugging is enabled
I used the following command to enable debugging:
perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/*

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-20 17:19:25 +00:00
Stefan Weil
1e37d05904 raw-posix: Handle errors in raw_create
In qemu-iotests, some large images are created using qemu-img.

Without checks for errors, qemu-img will just create an
empty image, and later read / write tests will fail.

With the patch, failures during image creation are detected
and reported.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16 17:28:49 -05:00
Christoph Hellwig
45566e9c99 replace bdrv_{get, put}_buffer with bdrv_{load, save}_vmstate
The VM state offset is a concept internal to the image format.  Replace
the old bdrv_{get,put}_buffer method that require an index into the
image file that is constructed from the VM state offset and an offset
into the vmstate with the bdrv_{load,save}_vmstate that just take an
offset into the VM state.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16 08:28:13 -05:00
Kevin Wolf
3f6a3ee51e qcow2: Fix L1 table memory allocation
Contrary to what one could expect, the size of L1 tables is not cluster
aligned. So as we're writing whole sectors now instead of single entries,
we need to ensure that the L1 table in memory is large enough; otherwise
write would access memory after the end of the L1 table.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10 13:44:29 -05:00
Kevin Wolf
c53ffce91b qcow1: Fix qcow_aio_writev
Pass is_write = 1 to qcow_aio_setup when writing.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-10 13:44:29 -05:00
G 3
1c27a8b35e Substitute O_DSYNC with O_SYNC or O_FSYNC when needed.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09 16:58:07 -05:00
Nolan
c76f4952bb Allow adjustment of http block device's readahead size, via a new
":readahead=###:" suffix.

Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09 16:06:40 -05:00
Anthony Liguori
1cec71e359 Revert "support colon in filenames"
This reverts commit 707c0dbc97.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09 16:06:38 -05:00
Kevin Wolf
0aa217e461 qcow2: Make cache=writethrough default
The performance of qcow2 has improved meanwhile, so we don't need to
special-case it any more. Switch the default to write-through caching
like all other block drivers.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09 16:06:37 -05:00
Kevin Wolf
3b88e52b41 qcow2: Cache refcount blocks during snapshot creation
The really time consuming part of snapshotting is to adjust the reference count
of all clusters. Currently after each adjusted cluster the refcount block is
written to disk.

Don't write each single byte immediately to disk but cache all writes to the
refcount block and write them out once we're done with the block.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 14:18:07 -05:00
Kevin Wolf
22afa7b5b6 block-raw: Allow pread beyond the end of growable images
When using O_DIRECT, qcow2 snapshots didn't work any more for me. In the
process of creating the snapshot, qcow2 tries to pwrite some new information
(e.g. new L1 table) which will often end up being after the old end of the
image file. Now pwrite tries to align things and reads the old contents of the
file, read returns 0 because there is nothing to read after the end of file and
pwrite is stuck in an endless loop.

This patch allows to pread beyond the end of an image file. Whenever the
given offset is after the end of the image file, the read succeeds and fills
the buffer with zeros.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 14:18:07 -05:00
Ram Pai
707c0dbc97 support colon in filenames
Problem: It is impossible to feed filenames with the character colon because
qemu interprets such names as a protocol. For example filename scsi:0, is
interpreted as a protocol by name "scsi".

This patch allows user to espace colon characters. For example the above
filename can now be expressed either as 'scsi\:0' or as file:scsi:0

anything following the "file:" tag is interpreted verbatin. However if "file:"
tag is omitted then any colon characters in the string must be escaped using
backslash.

Here are couple of examples:

scsi\:0\:abc is a local file scsi:0:abc
http\://myweb is a local file by name http://myweb
file:scsi:0:abc is a local file scsi:0:abc
file:http://myweb is a local file by name http://myweb

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 13:50:05 -05:00
Filip Navara
14899cdf3a Fix QCOW2 debugging code to compile again
Updated to use C99 comments.

Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 08:52:40 -05:00
Blue Swirl
19a3da7f4d Fix opening of read only raw images
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-17 18:27:44 +03:00
Kevin Wolf
9923e05e1a update_refcount: Write complete sectors
When updating the refcount blocks in update_refcount(), write complete sectors
instead of updating single entries.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:37 -05:00
Kevin Wolf
4c1612d954 alloc_cluster_link_l2: Write complete sectors
When updating the L2 tables in alloc_cluster_link_l2(), write complete
sectors instead of updating single entries.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:36 -05:00
Kevin Wolf
6583e3c7e8 l2_allocate: Write complete sectors
When modifying the L1 table, l2_allocate() needs to write complete sectors
instead of single entries. The L1 table is already in memory, reading it from
disk in the block layer to align the request is wasted performance.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:36 -05:00
Kevin Wolf
ed6ccf0f51 qcow2: Rename global functions
The qcow2 source is now split into several more manageable files. During the
conversion quite some functions that were static before needed to be changed to
be global to make the source compile again.

We were lucky enough not to get name conflicts with these additional global
names, but they are not nice. This patch adds a qcow2_ prefix to all of the
global functions in qcow2.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:36 -05:00
Kevin Wolf
c142442b06 qcow2: Split out snapshot functions
qcow2-snapshot.c contains the code related to snapshotting.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:36 -05:00
Kevin Wolf
45aba42fba qcow2: Split out guest cluster functions
qcow2-cluster.c contains all functions related to the management of guest
clusters, i.e. what the guest sees on its virtual disk. This code is about
mapping these guest clusters to host clusters in the image file using the
two-level lookup tables.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:36 -05:00
Kevin Wolf
f7d0fe0239 qcow2: Split out refcount handling
qcow2-refcount.c contains all functions which are related to cluster
allocation and management in the image file. A large part of this is the
reference counting of these clusters.

Also a header file qcow2.h is introduced which will contain the interface of
the split qcow2 modules.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:36 -05:00
Kevin Wolf
9ccb258e28 qcow2: Change default cluster size to 64k
Larger cluster sizes mean less metadata. This has been discussion a few times,
let's do it now. This turns 64k clusters on by default for new images.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:36 -05:00
Avi Kivity
11a1feb655 raw-posix: Remove O_RDWR when attempting to open a file read-only
When we open a file, we first attempt to open it read-write, then fall back
to read-only.  Unfortunately we reuse the flags from the previous attempt,
so both attempts try to open the file with write permissions, and fail.

Fix by clearing the O_RDWR flag from the previous attempt.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:35 -05:00
Avi Kivity
736d0c25ed raw-posix: open flags use BDRV_ namespace, not posix namespace
The flags argument to raw_common_open() contain bits defined by the BDRV_O_*
namespace, not the posix O_* namespace.

Adjust to use the correct constants.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:35 -05:00
Christoph Hellwig
63ec93db21 raw-posix: cleanup ioctl methods
Rename raw_ioctl and raw_aio_ioctl to hdev_ioctl and hdev_aio_ioctl as they
are only used for the host device.  Also only add them to the method table
for the cases where we need them (generic hdev if linux and linux CDROM)
instead of declaring stubs and always add them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2009-06-15 14:04:34 +02:00
Christoph Hellwig
508c7cb3fa block: add bdrv_probe_device method
Add a bdrv_probe_device method to all BlockDriver instances implementing
host devices to move matching of host device types into the actual drivers.
For now we keep exacly the old matching behaviour based on the devices names,
although we really should have better detetion methods based on device
information in the future.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2009-06-15 14:04:22 +02:00
Christoph Hellwig
f3a5d3f8a1 raw-posix: split hdev drivers
Instead of declaring one BlockDriver for all host devices declared one
for each type:  a generic one for normal disk devices, a Linux floppy
driver and a CDROM driver for Linux and FreeBSD.  This gets rid of a lot
of messy ifdefs and switching based on the type in the various removal
device methods.

block.c grows a new method to find the correct host device driver based
on OS-sepcific criteria, which will later into the actual drivers in a
later patch in this series.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2009-06-15 13:55:19 +02:00
Christoph Hellwig
90babde0ca raw-posix: add a raw_open_common helper
raw_open and hdev_open contain the same basic logic.  Add a new
raw_open_common helper containing the guts of the open routine
and call it from raw_open and hdev_open.

We use the new open_flags field in BDRVRawState to allow passing
additional open flags to raw_open_common from both.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2009-06-15 13:53:38 +02:00
Christoph Hellwig
0e1d8f4c54 raw-posix: always store open flags
Both the Linux floppy and the FreeBSD CDROM host device need to store
the open flags so that they can re-open the device later.  Store the
open flags unconditionally to remove the ifdef mess and simply the
calling conventions for the later patches in the series.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2009-06-15 13:53:26 +02:00
Kevin Wolf
db08adf526 qemu-img: Print available options with -o ?
This patch adds a small help text to each of the options in the block drivers
which can be displayed by using qemu-img create -f fmt -o ?

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2009-06-06 18:38:57 +03:00
Christoph Hellwig
f9e96436cc vvfat: one more missing BlockDriver C99 initializer conversion
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-28 02:14:56 -05:00
Christoph Hellwig
c16b5a2ca0 fully split aio_pool from BlockDriver
Now that we have a separate aio pool structure we can remove those
aio pool details from BlockDriver.

Every driver supporting AIO now needs to declare a static AIOPool
with the aiocb size and the cancellation method.  This cleans up the
current code considerably and will make it cleaner and more obvious
to support two different aio implementations behind a single
BlockDriver.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:46:03 -05:00
Christoph Hellwig
ad53089b0d qcow: add qcow_aio_setup helper
[this one is required for [PATCH] fully split aio_pool from BlockDriver,
 sorry for not sending it out earlier]

Add a qcow_aio_setup helper to qcow to shared common code between
the aio_readv and aio_writev methods.  Based on the function with
the same name in qcow2.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:45:59 -05:00
Christoph Hellwig
4099df586a raw-posix: fix hdev_create
We do need hdev_create unconditionally on all platforms so that qemu-img
create support for host device works on all platforms.

Also relax the check to allow character devices in addition to block
devices.  On many Unix platforms block devices have buffered block
nodes and unbuffered character device nodes, and on FreeBSD the block
nodes don't even exist anymore.  Also on Linux we do support the
/dev/sgN scsi passthrough devices through the host device driver,
and probably the old-style /dev/raw/rawN raw devices although I haven't
tested that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:45:54 -05:00
Christoph Hellwig
94c6d6d815 fix raw_pread_aligned return value
raw_pread_aligned currently returns the raw return value from
lseek/read, which is always -1 in case of an error.  But the
callers higher up the stack expect it to return the negated
errno just like raw_pwrite_aligned.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:45:37 -05:00
Kevin Wolf
91a073a975 Drop bdrv_create2
This patch converts the remaining users of bdrv_create2 to bdrv_create and
removes the now unused function.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:45:23 -05:00
Kevin Wolf
a980c98cf1 qcow2: Update multiple refcounts at once
Don't write each single changed refcount block entry to the disk after it is
written, but update all entries of the block and write all of them at once.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:45:20 -05:00
Kevin Wolf
44ff42de1c qcow2: Refactor update_refcount
This is a preparation patch with no functional changes. It moves the allocation
of new refcounts block to a new function and makes update_cluster_refcount (for
one cluster) call update_refcount (for multiple clusters) instead the other way
round.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:45:15 -05:00
Kevin Wolf
ade406775d qcow/qcow2: Drop synchronous qcow_write()
There is only one (internal) user left and it can be switched to the normal
emulation provided in block.c

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:45:10 -05:00
Alexander Graf
769ce76d0e Add HTTP protocol using curl v6
Currently Qemu can read from posix I/O and NBD. This patch adds a
third protocol to the game: HTTP.

In certain situations it can be useful to access HTTP data directly,
for example if you want to try out an http provided OS image, but
don't know if you want to download it yet.

Using this patch you can now try it on on the fly. Just use it like:

qemu -cdrom http://host/path/my.iso

Signed-off-by: Alexander Graf <agraf@suse.de>
2009-05-22 10:50:35 -05:00
Kevin Wolf
73c632edc4 qcow2: Allow different cluster sizes
Add an option to specify the cluster size of a newly created qcow2 image.
Default is 4k which is the same value that was hard-coded before.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22 10:50:32 -05:00
Kevin Wolf
0e7e1989f7 Convert all block drivers to new bdrv_create
Now we can make use of the newly introduced option structures. Instead of
having bdrv_create carry more and more parameters (which are format specific in
most cases), just pass a option structure as defined by the driver itself.

bdrv_create2() contains an emulation of the old interface to simplify the
transition.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22 10:50:31 -05:00
malc
eb0b64f7aa Do not attempt to allocate sn_tab when there are no snapshots
This was caught by a7d27b536f which
aborted on this attempt, thanks to Alex Ivanov for report.

Signed-off-by: malc <av1474@comtv.ru>
2009-05-21 05:40:53 +04:00
Anthony Liguori
dcc5e4a076 Fix warning on WIN32
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14 17:03:50 -05:00
Anthony Liguori
019d6b8ff0 Move block drivers into their own directory
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14 16:13:46 -05:00