This test assumes that mirror flushes the source when entering the READY
state, and that the format level will pass that flush on to the protocol
level (where we intercept it with blkdebug).
However, apparently that does not happen when using a VMDK image with
zeroed_grain=on, which actually is the default set by testenv.py. Right
now, Python tests ignore IMGOPTS, though, so this has no effect; but
Vladimir has a series that will change this, so we need to fix this test
before that series lands.
We can fix it by writing data to the source before we start the mirror
job; apparently that makes the (VMDK) format layer change its mind and
pass on the pre-READY flush to the protocol level, so the test passes
again. (I presume, without any data written, mirror just does a 64M
zero write on the target, which VMDK with zeroed_grain=on basically just
ignores.)
Without this, we do not get a flush, and so blkdebug only sees a single
flush at the end of the job instead of two, and therefore does not
inject an error, which makes the block job complete instead of raising
an error.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223165308.103793-1-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The lsi53c895a SCSI adaptor might not be enabled in each and every
x86 QEMU binary, e.g. it's disabled in the RHEL/CentOS build.
Thus let's add a check to the 051 test so that it does not fail if
this device is not available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206143404.247032-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a new test to verify that want_zero=false block-status calls do not
pollute the block-status cache for want_zero=true calls.
We check want_zero=true calls and their results using `qemu-img map`
(over NBD), and want_zero=false calls also using `qemu-img map` over
NBD, but using the qemu:allocation-depth context.
(This test case cannot be integrated into nbd-qemu-allocation, because
that is a qcow2 test, and this is a raw test.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-3-hreitz@redhat.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHzwdAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOlMwgApVO6T934TwuTOFBs02Tp8KcjcKQq
5Qf5PrwbsluE8YixJERAFgfxgzbQKL/iHzkP97KoVo3CFFDc1sss7v3mrbbHxbwB
jiYIgbNjRfBbZq7nNmxf2bcXxTpZYvMNEia0QPyNl1GQ0JS/RFOsEYcyVUPvVmAI
djeESRyku1OS5bS5veqE2tL+AWDuodjHeW78qi+yIDRPx3jHLRzuGpQ/3KtgMN6o
d61h5vVrqdxe1HYH/8sh+qU71w7drpNZVYq8PqkZyit/LXgDMyDDOks1XWarrrJE
9xzNBUNR+B6CuHtNw1DGk4rvsCBV/F0ZVki6guVGoqG8njF3l6xyqRHPbw==
=2/gW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* configure and meson fixes
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
# gpg: Signature made Fri 28 Jan 2022 10:13:36 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
configure: fix parameter expansion of --cross-cc-cflags options
qapi: Cleanup SGX related comments and restore @section-size
check-block: replace -makecheck with TAP output
qemu-iotests: require at least an argument to check-block.sh
build: make check-block a meson test
scripts/mtest2make: add support for SPEED=thorough
check-block.sh: passthrough -jN flag of make to -j N flag of check
meson: Use find_program() to resolve the entitlement.sh script
exec/cpu: Make host pages variables / macros 'target agnostic'
meson.build: Use a function from libfdt 1.5.1 for the library check
intc: Unexport InterruptStatsProviderClass-related functions
docker: add msitools to Fedora/mingw cross
build-sys: fix undefined ARCH error
build-sys: fix a meson deprecation warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let "meson test" take care of showing the results of the individual tests,
consistently with other output from "make check V=1".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is anyway how check-block.sh is used in practice, and by removing the
list of formats in the script we avoid duplication between meson.build
and check-block.sh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"meson test" can be asked to run tests verbosely; this makes it usable
also for qemu-iotests's own harness, and it lets "make check-block"
reuse mtest2make.py's infrastructure to find and build test dependencies.
Adjust check-block.sh to use the standard exit code that reports a test
as skipped. Alternatively, in the future we could make it produce TAP
output, which is consistent with all other "make check" tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This improves performance of running iotests during "make -jN check".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223183933.1497037-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't generate trace events for tests/ and qga/ because that it is
not simple and not necessary. We have corresponding comments in both
tests/meson.build and qga/meson.build.
Still to not miss possible future qapi code generation call, and not to
forget to enable trace events generation, let's enable it by default.
So, turn option --gen-trace into opposite --no-trace-events and use new
option only in tests/ and qga/ where we already have good comments why
we don't generate trace events code.
Note that this commit enables trace-events generation for qapi-gen.py
call from tests/qapi-schema/meson.build and storage-daemon/meson.build.
Still, both are kind of noop: tests/qapi-schema/ doesn't seem to
generate any QMP command code and no .trace-events files anyway,
storage-daemon/ uses common QMP command implementations and just
generate empty .trace-events
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-8-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Making trace generation work for tests/ and qga/ would involve some
Meson hackery to ensure we generate the trace-events files before
trace-tool uses them. Since we don't actually support tracing there
anyway, we bypass that problem.
Let's add corresponding comments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220126161130.3240892-7-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Pasto fixed, commit message punctuation tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
That should help catch build issues/regressions with wixl.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220114084312.3725242-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
List test/data/acpi/virt/PPTT as the expected files allowed to
be changed in tests/qtest/bios-tables-test-allowed-diff.h
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20220107083232.16256-5-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix compiler warnings with ui and sdl
- update QXL/spice dependancy
- skip I/O tests on Alpine
- update fedora image to latest version
- integrate lcitool and regenerate docker images
- favour CONFIG_LINUX_USER over CONFIG_LINUX
- add libfuse3 dependencies to docker images
- add dtb-kaslr-seed control knob to virt machine
- fix build breakage from HMP update
- update docs for C standard and suffix usage
- add more logging for debugging user hole finding
- expand reserve for brk() for static 64 bit programs
- fix bug with linux-user hole calculation
- avoid affecting flags when printing results in float tests
- add float reference files for ppc64
- update FreeBSD to 12.3
- add bison dependancy to tricore images
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmHm7y4ACgkQ+9DbCVqe
KkSsDwgAgWiOUtnPxNnZ3PuLQpIDCGSotjshCXo9PhPu/SWedvMfTftPU+g3wxbl
+A2GZcNnVPaOrJo7hfDtOtir9UJUFTmyv8KtPhUYmtxxiv3HWM1RvgrBQnMEvo5A
GFAq6jSFclH4HTSxz4FHbEl0TM3feQbSfbMWI6Q1Q+aPm8hWSzhClIqBCwsJJdm8
hi76BE9o94BtvA6Qv2CoPvGsOzpV0X0VXaljf1W927BzJu+b0wEGwIm61+eovNsh
DS2kDZk+PpiYeRN/oC40Z6ozR/Lf/jZ/87AnN3gV/yLDwa5cafA+GtmcKMx1IJIc
BVm0bJo+KzHfYiVjYTJhsU7C2W71PA==
=uBQq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-7.0-180122-2' into staging
Various testing and other misc updates:
- fix compiler warnings with ui and sdl
- update QXL/spice dependancy
- skip I/O tests on Alpine
- update fedora image to latest version
- integrate lcitool and regenerate docker images
- favour CONFIG_LINUX_USER over CONFIG_LINUX
- add libfuse3 dependencies to docker images
- add dtb-kaslr-seed control knob to virt machine
- fix build breakage from HMP update
- update docs for C standard and suffix usage
- add more logging for debugging user hole finding
- expand reserve for brk() for static 64 bit programs
- fix bug with linux-user hole calculation
- avoid affecting flags when printing results in float tests
- add float reference files for ppc64
- update FreeBSD to 12.3
- add bison dependancy to tricore images
# gpg: Signature made Tue 18 Jan 2022 16:47:42 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-7.0-180122-2: (31 commits)
docker: include bison in debian-tricore-cross
FreeBSD: Upgrade to 12.3 release
test/tcg/ppc64le: Add float reference files
tests/tcg/multiarch: Read fp flags before printf
linux-user: don't adjust base of found hole
linux-user/elfload: add extra logging for hole finding
linux-user: expand reserved brk space for 64bit guests
docs/devel: more documentation on the use of suffixes
docs/devel: update C standard to C11
monitor: move x-query-profile into accel/tcg to fix build
hw/arm: add control knob to disable kaslr_seed via DTB
tests/docker: add libfuse3 development headers
tests/tcg: use CONFIG_LINUX_USER, not CONFIG_LINUX
tests/docker: auto-generate alpine.docker with lcitool
tests/docker: fully expand the alpine package list
tests/docker: fix sorting of alpine image package lists
tests/docker: updates to alpine package list
.gitlab-ci.d/cirrus: auto-generate variables with lcitool
tests/docker: remove ubuntu.docker container
tests/docker: auto-generate opensuse-leap.docker with lcitool
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Binutils sometimes fail to build if bison is not installed:
/bin/sh ./ylwrap `test -f arparse.y || echo ./`arparse.y y.tab.c arparse.c y.tab.h arparse.h y.output arparse.output -- -d
./ylwrap: 109: ./ylwrap: -d: not found
(the correct invocation of ylwrap would have "bison -d" after the double
dash). Work around by installing it in the container.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/596
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221111624.352804-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220105135009.1584676-34-alex.bennee@linaro.org>
Note, since libtasn1 was fixed in 12.3 [*], this commit re-enables GnuTLS.
[*] https://gitlab.com/gnutls/libtasn1/-/merge_requests/71
Signed-off-by: Brad Smith <brad@comstyle.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <YdUCQLVe5JSWZByQ@humpty.home.comstyle.com>
Message-Id: <20220105135009.1584676-31-alex.bennee@linaro.org>
We need to read the floating-point flags before printf may do
other floating-point operations which may affect the flags.
Hexagon reference files regenerated by Taylor Simpson.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1639510781-3790-1-git-send-email-tsimpson@quicinc.com>
Message-Id: <20211224035541.2159966-2-richard.henderson@linaro.org>
Message-Id: <20220105135009.1584676-29-alex.bennee@linaro.org>
The FUSE exports feature is not built because most container images do
not have libfuse3 development headers installed. Add the necessary
packages to the Dockerfiles.
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Tested-by: Beraldo Leal <bleal@redhat.com>
Message-Id: <20211207160025.52466-1-stefanha@redhat.com>
[AJB: migrate to lcitool qemu.yml and regenerate]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20220105135009.1584676-21-alex.bennee@linaro.org>
The two more or less overlap, because CONFIG_LINUX is a requirement for Linux
user-mode emulation. However, CONFIG_LINUX is technically a host symbol
that applies even to system emulation. Defining CONFIG_LINUX_USER, and
CONFIG_BSD_USER for eventual future use, is cleaner.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211210084836.25202-1-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220105135009.1584676-20-alex.bennee@linaro.org>
This commit is best examined using the "-b" option to diff.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-19-berrange@redhat.com>
Message-Id: <20220105135009.1584676-19-alex.bennee@linaro.org>
Add many extra alpine packages to cover the various optional QEMU build
dependencies pulled in by other dockerfiles.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-18-berrange@redhat.com>
Message-Id: <20220105135009.1584676-18-alex.bennee@linaro.org>
"python" sorts alphabetically after "py3-xxxx"
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-17-berrange@redhat.com>
Message-Id: <20220105135009.1584676-17-alex.bennee@linaro.org>
Cleanup the package lists by removing some entries that we don't need to
directly reference
binutils: implied by the compiler toolchain
coreutils: not required by QEMU build
mesa-egl mesa-gbm: implied by mesa-dev
ninja: alias for samurai package
shadow: not required by QEMU build
util-linux-dev: not directly required by QEMU build
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-16-berrange@redhat.com>
Message-Id: <20220105135009.1584676-16-alex.bennee@linaro.org>
The current Cirrus CI variables files were previously generated by using
lcitool. This change wires them up to the refresh script to make that
link explicit.
This changes the package list because libvirt-ci now knows about the
mapping for dtc on FreeBSD and macOS platforms.
The variables are also now emit in sorted order for stability across
runs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-15-berrange@redhat.com>
Message-Id: <20220105135009.1584676-15-alex.bennee@linaro.org>
This duplicates the ubuntu2004 container but with an inconsistent set of
packages.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-14-berrange@redhat.com>
Message-Id: <20220105135009.1584676-14-alex.bennee@linaro.org>
This commit is best examined using the "-b" option to diff.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-13-berrange@redhat.com>
Message-Id: <20220105135009.1584676-13-alex.bennee@linaro.org>
This commit is best examined using the "-b" option to diff.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-12-berrange@redhat.com>
Message-Id: <20220105135009.1584676-12-alex.bennee@linaro.org>
This commit is best examined using the "-b" option to diff.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-11-berrange@redhat.com>
Message-Id: <20220105135009.1584676-11-alex.bennee@linaro.org>
This commit is best examined using the "-b" option to diff.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-10-berrange@redhat.com>
Message-Id: <20220105135009.1584676-10-alex.bennee@linaro.org>
This commit is best examined using the "-b" option to diff.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-9-berrange@redhat.com>
Message-Id: <20220105135009.1584676-9-alex.bennee@linaro.org>
This introduces
https://gitlab.com/libvirt/libvirt-ci
as a git submodule at tests/lcitool/libvirt-ci
The 'lcitool' program within this submodule will be used to
automatically generate build environment manifests from a definition
of requirements in tests/lcitool/projects/qemu.yml
It will ultimately be capable of generating
- Dockerfiles
- Package lists for installation in VMs
- Variables for configuring Cirrus CI environments
When a new build pre-requisite is needed for QEMU, if this package
is not currently known to libvirt-ci, it must first be added to the
'mappings.yml' file in the above git repo.
Then the submodule can be updated and the build pre-requisite added
to the tests/lcitool/projects/qemu.yml file. Now all the build env
manifests can be re-generated using 'make lcitool-refresh'
This ensures that when a new build pre-requisite is introduced, it
is added to all the different OS containers, VMs and Cirrus CI
environments consistently.
It also facilitates the addition of containers targetting new distros
or updating existing containers to new versions of the same distro,
where packages might have been renamed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-8-berrange@redhat.com>
Message-Id: <20220105135009.1584676-8-alex.bennee@linaro.org>
The Fedora 33 release is shortly end of life. Switch to the newest
Fedora 35 to maximise lifespan until we need to update again.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-7-berrange@redhat.com>
Message-Id: <20220105135009.1584676-7-alex.bennee@linaro.org>
These tests ensure that our emulation for these cpus is not completely
broken and we can at least run OpenBIOS on them.
$ make check-avocado AVOCADO_TESTS=../tests/avocado/ppc_74xx.py
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220117144757.782441-1-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add a test for each shift instruction in order to to prevent
regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-6-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A lot of Optional[] types doesn't make code beautiful.
test_field_width defaults to 8, but that is never used in the code.
More over, if we want some default behavior for single call of
test_run(), it should just print the whole test name, not limiting or
expanding its width, so 8 is bad default.
So, just drop the default as unused for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211210201450.101576-1-vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
First, this permission never protected a node from being changed, as
generic child-replacing functions don't check it.
Second, it's a strange thing: it presents a permission of parent node
to change its child. But generally, children are replaced by different
mechanisms, like jobs or qmp commands, not by nodes.
Graph-mod permission is hard to understand. All other permissions
describe operations which done by parent node on its child: read,
write, resize. Graph modification operations are something completely
different.
The only place where BLK_PERM_GRAPH_MOD is used as "perm" (not shared
perm) is mirror_start_job, for s->target. Still modern code should use
bdrv_freeze_backing_chain() to protect from graph modification, if we
don't do it somewhere it may be considered as a bug. So, it's a bit
risky to drop GRAPH_MOD, and analyzing of possible loss of protection
is hard. But one day we should do it, let's do it now.
One more bit of information is that locking the corresponding byte in
file-posix doesn't make sense at all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902093754.2352-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Consider the case when the whole buffer is zero and end is unaligned.
If i <= tail, we return 1 and do one unaligned WRITE, RMW happens.
If i > tail, we do on aligned WRITE_ZERO (or skip if target is zeroed)
and again one unaligned WRITE, RMW happens.
Let's do better: don't fragment the whole-zero buffer and report it as
ZERO: in case of zeroed target we just do nothing and avoid RMW. If
target is not zeroes, one unaligned WRITE_ZERO should not be much worse
than one unaligned WRITE.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211217164654.1184218-3-vsementsov@virtuozzo.com>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This demonstrates what happens when the block status changes in
sub-min_sparse granularity, but all of the parts are zeroed out. The
alignment logic in is_allocated_sectors() prevents that the target image
remains fully sparse as expected, but turns it into a data cluster of
explicit zeros.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211217164654.1184218-2-vsementsov@virtuozzo.com>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With CAP_DAC_OVERRIDE (which e.g. root generally has), permission checks
will be bypassed when opening files.
308 in one instance tries to open a read-only file (FUSE export) with
qemu-io as read/write, and expects this to fail. However, when running
it as root, opening will succeed (thanks to CAP_DAC_OVERRIDE) and only
the actual write operation will fail.
Note this as "Case not run", but have the test pass in either case.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 2c7dd057aa
("export/fuse: Pass default_permissions for mount")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220103120014.13061-1-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test the following scenario:
- Simple stream block in two-layer backing chain (base and top)
- The job is drained via blk_drain(), then an error occurs while the job
settles the ongoing request
- And so the job completes while in blk_drain()
This was reported as a segfault, but is fixed by "block-backend: prevent
dangling BDS pointers across aio_poll()".
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2036178
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220111153613.25453-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The -device JSON syntax impl leaks a reference on the created
DeviceState instance. As a result when you hot-unplug the
device, the device_finalize method won't be called and thus
it will fail to emit the required DEVICE_DELETED event.
A 'json-cli' feature was previously added against the
'device_add' QMP command QAPI schema to indicated to mgmt
apps that -device supported JSON syntax. Given the hotplug
bug that feature flag is not usable for its purpose, so
we add a new 'json-cli-hotplug' feature to indicate the
-device supports JSON without breaking hotplug.
Fixes: 5dacda5167
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/802
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220105123847.4047954-2-berrange@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adaptive polling measures the execution time of the polling check plus
handlers called when a polled event becomes ready. Handlers can take a
significant amount of time, making it look like polling was running for
a long time when in fact the event handler was running for a long time.
For example, on Linux the io_submit(2) syscall invoked when a virtio-blk
device's virtqueue becomes ready can take 10s of microseconds. This
can exceed the default polling interval (32 microseconds) and cause
adaptive polling to stop polling.
By excluding the handler's execution time from the polling check we make
the adaptive polling calculation more accurate. As a result, the event
loop now stays in polling mode where previously it would have fallen
back to file descriptor monitoring.
The following data was collected with virtio-blk num-queues=2
event_idx=off using an IOThread. Before:
168k IOPS, IOThread syscalls:
9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16
9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8
9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8
9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3
9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32
174k IOPS (+3.6%), IOThread syscalls:
9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32
9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8
9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8
9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32
Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because
the IOThread stays in polling mode instead of falling back to file
descriptor monitoring.
As usual, polling is not implemented on Windows so this patch ignores
the new io_poll_read() callback in aio-win32.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-2-stefanha@redhat.com
[Fixed up aio_set_event_notifier() calls in
tests/unit/test-fdmon-epoll.c added after this series was queued.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reenable util/filemonitor-inotify compilation. Compilation was
disabled when commit a620fbe9ac ("configure: convert compiler tests
to meson, part 5") moved CONFIG_INOTIFY1 from config-host.mak to
config-host.h.
This fixes the usb-mtp device and reenables test-util-filemonitor.
Fixes: a620fbe9ac ("configure: convert compiler tests to meson, part 5")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/800
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220107133514.7785-1-vr_qemu@t-online.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
