Commit Graph

14 Commits

Author SHA1 Message Date
Eric Blake
b66ff2c298 iotests: Specify explicit backing format where sensible
There are many existing qcow2 images that specify a backing file but
no format.  This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev.  With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently).  But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.

The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past.  It's time to set a better example in our own
iotests of properly setting this parameter.

iotest calls to create, rebase, and convert are all impacted to some
degree.  It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F.  (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-07-14 15:18:59 +02:00
Maxim Levitsky
44e808c130 Fix iotest 153
Commit f62514b3de made qemu-img reject -o "" but this test uses it.
Since this test only tries to do a dry-run run of qemu-img amend,
replace the -o "" with dummy -o "size=$size".

Fixes: f62514b3de

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200504131959.9533-1-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-05 13:17:36 +02:00
Eric Blake
a98b1a1fef iotests: Include QMP input in .out files
We generally include relevant HMP input in .out files, by virtue of
the fact that HMP echoes its input.  But QMP does not, so we have to
explicitly inject it in the output stream (appropriately filtered to
keep the tests passing), in order to make it easier to read .out files
to see what behavior is being tested (especially true where the output
file is a sequence of {'return': {}}).

Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114213415.23499-4-eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2019-11-18 20:33:48 -06:00
Eric Blake
de38b5005e qemu-img: Saner printing of large file sizes
Disk sizes close to INT64_MAX cause overflow, for some pretty
ridiculous output:

  $ ./nbdkit -U - memory size=$((2**63 - 512)) --run 'qemu-img info $nbd'
  image: nbd+unix://?socket=/tmp/nbdkitHSAzNz/socket
  file format: raw
  virtual size: -8388607T (9223372036854775296 bytes)
  disk size: unavailable

But there's no reason to have two separate implementations of integer
to human-readable abbreviation, where one has overflow and stops at
'T', while the other avoids overflow and goes all the way to 'E'. With
this patch, the output now claims 8EiB instead of -8388607T, which
really is the correct rounding of largest file size supported by qemu
(we could go 511 bytes larger if we used byte-accurate sizing instead
of rounding up to the next sector boundary, but that wouldn't change
the human-readable result).

Quite a few iotests need updates to expected output to match.

Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
2019-04-30 15:29:00 +02:00
Thomas Huth
36b9986b08 tests/qemu-iotests: Fix output of qemu-io related tests
One of the recent commits changed the way qemu-io prints out its
errors and warnings - they are now prefixed with the program name.
We've got to adapt the iotests accordingly to prevent that they
are failing.

Fixes: 99e98d7c9f ("qemu-io: Use error_[gs]et_progname()")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30 15:29:00 +02:00
Sergio Lopez
9cd97956cf iotests: 153: Wait for an answer to QMP commands
There are various actions in this test that must be executed
sequentially, as the result of it depends on the state triggered by the
previous one.

If the last argument of _send_qemu_cmd() is an empty string, it just
sends the QMP commands without waiting for an answer. While unlikely, it
may happen that the next action in the test gets invoked before QEMU
processes the QMP request.

This issue seems to be easier to reproduce on servers with limited
resources or highly loaded.

With this change, we wait for an answer on all _send_qemu_cmd() calls.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-19 15:49:29 +01:00
Fam Zheng
b857431d2a file-posix: Include filename in locking error message
Image locking errors happening at device initialization time doesn't say
which file cannot be locked, for instance,

    -device scsi-disk,drive=drive-1: Failed to get shared "write" lock
    Is another process using the image?

could refer to either the overlay image or its backing image.

Hoist the error_append_hint to the caller of raw_check_lock_bytes where
file name is known, and include it in the error hint.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01 12:51:11 +02:00
Fam Zheng
0e1a582750 iotests: 153: Fix dead code
This step was left behind my mistake. As suggested by the echoed text,
the intention was to test two devices with the same image, with
different options. The behavior should be the same as two QEMU
processes. Complete it.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-12 18:24:08 +02:00
Max Reitz
f45b638f9f iotests: Add creation test to 153
This patch adds a test case to 153 which tries to overwrite an image
(using qemu-img create) while it is in use.  Without the original user
explicitly sharing the necessary permissions (writing and truncation),
this should not be allowed.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180509215336.31304-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-06-11 16:18:45 +02:00
Max Reitz
4e7d73c5fb iotests: Add test for -U/force-share conflicts
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180502202051.15493-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-15 16:15:21 +02:00
Fam Zheng
de963500c5 iotests: Add regression test for commit base locking
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-19 12:01:39 +01:00
Fam Zheng
fcca5dce20 iotests: Test creating overlay when guest running
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20171225025107.23985-1-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-03-09 15:40:07 +01:00
Eric Blake
64ebf55648 qemu-io: Don't die on second open
Most callback commands in qemu-io return 0 to keep the interpreter
loop running, or 1 to quit immediately.  However, open_f() just
passed through the return value of openfile(), which has different
semantics of returning 0 if a file was opened, or 1 on any failure.

As a result of mixing the return semantics, we are forcing the
qemu-io interpreter to exit early on any failures, which is rather
annoying when some of the failures are obviously trying to give
the user a hint of how to proceed (if we didn't then kill qemu-io
out from under the user's feet):

$ qemu-io
qemu-io> open foo
qemu-io> open foo
file open already, try 'help close'
$ echo $?
0

In general, we WANT openfile() to report failures, since it is the
function used in the form 'qemu-io -c "$something" no_such_file'
for performing one or more -c options on a single file, and it is
not worth attempting $something if the file itself cannot be opened.
So the solution is to fix open_f() to always return 0 (when we are
in interactive mode, even failure to open should not end the
session), and save the return value of openfile() for command line
use in main().

Note, however, that we do have some qemu-iotests that do 'qemu-io
-c "open file" -c "$something"'; such tests will now proceed to
attempt $something whether or not the open succeeded, the same way
as if the two commands had been attempted in interactive mode.  As
such, the expected output for those tests has to be modified.  But it
also means that it is now possible to use -c close and have a single
qemu-io command line operate on more than one file even without
using interactive mode.  Although the '-c open' action is a subtle
change in behavior, remember that qemu-io is for debugging purposes,
so as long as it serves the needs of qemu-iotests while still being
reasonable for interactive use, it should not be a problem that we
are changing tests to the new behavior.

This has been awkward since at least as far back as commit
e3aff4f, in 2009.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10 13:18:05 +02:00
Fam Zheng
ba8980784d qemu-iotests: Add test case 153 for image locking
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-05-11 11:15:32 +02:00