Commit Graph

8531 Commits

Author SHA1 Message Date
Daniel Henrique Barboza
daff68ccd1 avocado/boot_linux_console.py: check TCG accel in test_ppc_g3beige()
This test breaks when run in an IBM POWER host with a QEMU compiled
with --disable-tcg and the ppc-softmmu target.

One thing to note is that the error message explictly mentions kvm_pr
support:

Command: ./qemu-system-ppc -display none -vga none (...)
-machine g3beige (...)
        Output: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try modprobe kvm_pr.
qemu-system-ppc: failed to initialize kvm: Invalid argument

The host was running kvm_hv, not kvm_pr, and the machine failed to load.

Unfortunately we don't have a way to detect whether the KVM module loaded
is kvm_hv or kvm_pr - we do a check for /dev/kvm to detect KVM support but
both modules create this file so that's not helpful.

Let's skip this test for now until we have a way of detecting kvm_pr support in the host.

Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 15:57:17 +01:00
Daniel Henrique Barboza
89b65e3072 avocado/replay_kernel.py: make tcg-icount check in run_vm()
The icount framework relies on TCG availability. If QEMU is built with
--disable-tcg we won't have icount either, and then this test will fail
with the following message in an IBM POWER9 host:

tests/avocado/replay_kernel.py:ReplayKernelNormal.test_ppc64_pseries:
ERROR: ConnectError: Failed to establish session:
(...)
/11-tests_avocado_replay_kernel.py_ReplayKernelNormal.test_ppc64_pseries/replay.bin:
cannot configure icount, TCG support not available

Although this was revealed in a specific ppc64 scenario, the TCG check
is being done in the common code inside run_vm() because all archs need
TCG to have access to icount.

Cc: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220303153517.168943-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 15:57:17 +01:00
Daniel Henrique Barboza
d78fb13d6b avocado/boot_linux_console.py: check tcg accel in test_ppc64_e500
Some ppc64 hosts (e.g. IBM POWER hosts) aren't able to run the e500
machine using KVM accel. Skip this test if TCG accel isn't available.

Cc: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220303153517.168943-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 15:57:17 +01:00
Daniel Henrique Barboza
6b87d614fe avocado/boot_linux_console.py: check for tcg in test_ppc_powernv8/9
The PowerNV8/9 machines does not work with KVM acceleration, meaning
that boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8/9 tests
will always fail when QEMU is compiled with --disable-tcg:

ERROR 1-tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8
-> VMLaunchFailure: ConnectError: Failed to establish session:
[Errno 104] Connection reset by peer
        Exit code: 1
        Command: ./qemu-system-ppc64 -display none -vga none -chardev socket,id=mon,path=/var/tmp/avo_qemu_sock_no19zg0m/qemu-1936936-7fffa77cff98-monitor.sock -mon chardev=mon,mode=control -machine powernv8 -chardev socket,id=console,path=/var/tmp/avo_qemu_sock_no19zg0m/qemu-1936936-7fffa77cff98-console.sock,server=on,wait=off -serial chardev:console -kernel /home/danielhb/avocado/data/cache/by_location/4514304e2c4ee84c5f0b5c8bacedda783891df68/zImage.epapr -append console=tty0 console=hvc0 -device pcie-pci-bridge,id=bridge1,bus=pcie.1,addr=0x0 -device nvme,bus=pcie.2,addr=0x0,serial=1234 -device e1000e,bus=bridge1,addr=0x3 -device nec-usb-xhci,bus=bridge1,addr=0x2
        Output: qemu-system-ppc64: The powernv machine does not work with KVM acceleration

Let's add the TCG accel requirement in both tests to skip them if we
don't have TCG support available.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220303153517.168943-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 15:57:17 +01:00
Daniel Henrique Barboza
74884cb1a6 qtest/meson.build: check CONFIG_TCG for boot-serial-test in qtests_ppc
'boot-serial-test' does not work with a QEMU built with --disable-tcg in
a IBM POWER9 host. The reason is that without TCG QEMU will default to
KVM acceleration, but then the KVM module in IBM POWER hosts aren't able
to handle other CPUs.

The result is that the test will break with a KVM error when trying to
ruin the ppce500 test:

$ QTEST_QEMU_BINARY=./qemu-system-ppc64 ./tests/qtest/boot-serial-test
/ppc64/boot-serial/ppce500: qemu-system-ppc64: -accel tcg: invalid accelerator tcg
error: kvm run failed Invalid argument
NIP 0000000000f00000   LR 0000000000000000 CTR 0000000000000000 XER 0000000000000000 CPU#0
MSR 0000000000000000 HID0 0000000000000000  HF 24020002 iidx 1 didx 1
TB 00000000 00000000 DECR 0
(...)
** (./tests/qtest/boot-serial-test:1935760): ERROR **: 07:44:03.010: Failed to find expected string. Please check '/tmp/qtest-boot-serial-sJ78sqg'

Fix it by checking CONFIG_TCG before compiling boot-serial-test.

Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220303153517.168943-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 15:57:17 +01:00
Daniel Henrique Barboza
44d827ea69 qtest/meson.build: check CONFIG_TCG for prom-env-test in qtests_ppc
'prom-env-test' is a TCG test that will fail if QEMU is compiled with
--disable-tcg:

$ QTEST_QEMU_BINARY=./qemu-system-ppc64 ./tests/qtest/prom-env-test
/ppc64/prom-env/mac99: qemu-system-ppc64: -accel tcg: invalid accelerator tcg
(... hangs indefinitely ...)

Fix it by checking CONFIG_TCG before compiling prom-env-test.

Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220303153517.168943-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 15:57:17 +01:00
Taylor Simpson
c0d86060f0 Hexagon (target/hexagon) assignment to c4 should wait until packet commit
On Hexagon, c4 is an alias for predicate registers P3:0.  If we assign to
c4 inside a packet with reads from predicate registers, the predicate
reads should get the old values.

Test case added to tests/tcg/hexagon/preg_alias.c

Co-authored-by: Michael Lambert <mlambert@cuicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-13-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-12 09:14:22 -08:00
Taylor Simpson
3977ba3078 Hexagon (target/hexagon) fix bug in conv_df2uw_chop
Fix typo that checked for 32 bit nan instead of 64 bit

Test case added in tests/tcg/hexagon/usr.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-11-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-12 09:14:22 -08:00
Taylor Simpson
8af2d9978a Hexagon (tests/tcg/hexagon) fix inline asm in preg_alias.c
Replace consecutive inline asm blocks with a single one with proper
outputs/inputs/clobbers rather than making assumptions about register
values being carried between separate blocks.

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-10-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-12 09:14:22 -08:00
Taylor Simpson
8576e7ecae Hexagon (tests/tcg/hexagon) update overflow test
Add a test that sets USR multiple times in a packet

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-9-tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-12 09:14:22 -08:00
Taylor Simpson
2479540fff Hexagon (tests/tcg/hexagon) add floating point instructions to usr.c
Tests to confirm floating point instructions are properly
setting exception bits in USR

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-8-tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-12 09:14:22 -08:00
Taylor Simpson
4d04395a17 Hexagon (tests/tcg/hexagon) test instructions that might set bits in USR
Hexagon has ~200 instructions that set the saturate bit in USR, these
were broken into groups of similar instructions and one instruction
from each group is tested with at least one input that does not
saturate and at least one input that does saturate.

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-7-tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-12 09:14:22 -08:00
Taylor Simpson
d76dd816bf Hexagon (target/hexagon) properly handle NaN in dfmin/dfmax/sfmin/sfmax
The float??_minnum implementation differs from Hexagon for SNaN,
it returns NaN, but Hexagon returns the other input.  So, we use
float??_minimum_number.

Test cases added to tests/tcg/hexagon/fpstuff.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220308190410.22355-1-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-12 09:14:22 -08:00
Taylor Simpson
77ccf44453 Hexagon (target/hexagon) properly handle denorm in arch_sf_recip_common
The arch_sf_recip_common function was calling float32_getexp which
adjusts for denorm, but the we actually need the raw exponent bits.

This function is called from 3 instructions
    sfrecipa
    sffixupn
    sffixupd

Test cases added to tests/tcg/hexagon/fpstuff.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-6-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-12 09:14:22 -08:00
Taylor Simpson
5b0043c67c Hexagon HVX (target/hexagon) fix bug in HVX saturate instructions
Two tests added to tests/tcg/hexagon/hvx_misc.c
    v21.uw = vadd(v11.uw, v10.uw):sat
    v25:24.uw = vsub(v17:16.uw, v27:26.uw):sat

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-3-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-12 09:14:22 -08:00
Michael Lambert
58ff298166 Hexagon (target/hexagon) fix bug in circular addressing
Versions V3 and earlier should treat the "K_const" and "length" values
as unsigned.

Modified circ_test_v3() in tests/tcg/hexagon/circ.c to reproduce the bug

Signed-off-by: Michael Lambert <mlambert@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-2-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2022-03-12 09:14:22 -08:00
Peter Maydell
2048c4eba2 I²C / SMBus / PMBus patches
- Add some Renesas models
 - Add Titus Rwantare to MAINTAINERS
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmInnGIACgkQ4+MsLN6t
 wN4/+xAAnizlInSPGTA6RAKZS6rVjY3N0/tYsdZWWRTxfVZcN3NceQGwDzFJlVhm
 Hsyv9ZgHNpFXcWAyIH2+YwVm95XsCklHQN10HEeQvNqI/cMrAj8lHudP2PMHbxhG
 TecGjuMiQFNK+FMxWvsUovj069LJHFBznCT7NqMjBmh2XsIOB9gCwA4FzU3ehOG+
 5v9KPC8kUls8J0M7TiUfjln/jUzYeLfsAztLKhvhOF7afAttZvegcvMd+uxFniGa
 Gi1+NKl9mx/H4PGaOZdyiFcgCa7lx55TAaW0VJjejMgfXL56mtB5MLTRqJdUIF+Z
 v8ACM+swPUqu4HImwhAfnIGN05GWXXMWPnttOxK15H6vA4Rhz2k2zy+APJBzX324
 BrMPeDITBj2jlPVwCwWZb81J+ImYovP+CqiCGunkVA7GjbPTbTGps235Ng1Brgua
 cJ+VZ9OtkvB3YkDLHxivxvJjuRwWySEA3AQnvGskJ6V7SMIEUnqiAbAimWuBLi6I
 JV/Nd7QP+/PcuVoDYpdrDAtxO4R3MZW8G2l1Kl79eQ5TLIzAO6KcaxhJacYbdNtk
 U6Qj9+pupvMh+SCzwXcbVE9N4h+n4vzdqij3MSxtfhFW0fCbdnR9OGKdYQKFvNe3
 tOqPyoYrtGvy+/PlZL+/BFmTiOP9RrFvk1zrWlS6ZqiqKMJhdvQ=
 =scS/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/philmd/tags/pmbus-20220308' into staging

I²C / SMBus / PMBus patches

- Add some Renesas models
- Add Titus Rwantare to MAINTAINERS

# gpg: Signature made Tue 08 Mar 2022 18:11:46 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/pmbus-20220308:
  hw/sensor: add Renesas raa228000 device
  hw/sensor: add Renesas raa229004 PMBus device
  hw/sensor: add Intersil ISL69260 device model
  hw/i2c: Added linear mode translation for pmbus devices
  hw/i2c: pmbus: update MAINTAINERS
  hw/i2c: pmbus: refactor uint handling
  hw/i2c: pmbus: add PEC unsupported warning
  hw/i2c: pmbus: fix error returns and guard against out of range accesses
  hw/i2c: pmbus: add registers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-09 21:16:27 +00:00
Peter Maydell
d9ccf33f94 linux-user pull request 20220308
deliver SIGTRAP on POWERPC_EXCP_TRAP
 remove stale "not threadsafe" comments
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmInb/YSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748H1kQAJ+FT6y4bcUORBNBqVUURR7ENA1fDg+F
 bE/YW6TlREWIOw4N1iiS4kmIiGyowPY6zWvUM4jib7g1v1dNF9TbTJz7bpPapk0v
 emz+IMG/jgCNziXhoY3rtVDGyfOuH4zsbjTKqARS1411Qy15B2EIrGbRL3BaROL0
 e7/JRDj8c6GS6sFDHbp+LgKTZNc/qgAJuTO6MbrH0oCUuK38H1Kxfz+1yYDkDz7A
 C9q28thYNzkIqqlhyZjTfwDCkjvVNjZhqRTlZPaNRz6EzN4ym0eaX+wRuPZTXwnr
 H9pEdKJXO7ezq51xdEUW0MITlzzmWlkrEtuVsEl7cM4XPXd4CHjKiEHkSEcYBdmR
 utqzqP2OJKeJJRM7tHFtWw3+JDrfGI2xp421rKuwf0yndwgqxnaLD/McP/J0L5DJ
 Y4e04kJmRb9Iy849zMTQXascTwy/ZwK4/wezArgl4FNxsOh1W35YUd3NVf4wzaIG
 0DTPR2d6THUaoZ5Hs67uKMMmAk4u/yEdEs5MmIhyFOIN3Hsa+AygPmnSrMu1yuCw
 gaCjjwSkK92mqrXH7zSrxJrEWm0/5SX8NROROa6T8cXf3uuQYLftp66AJrExXWyE
 B1MOEMvZV6Qm0vHC5NiJtVcitIhWiVv00F3mn20dy47xCT3ndm34j86LO4ymsyVT
 JTYIY0ulbQY+
 =wSx/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/lvivier-gitlab/tags/linux-user-for-7.0-pull-request' into staging

linux-user pull request 20220308

deliver SIGTRAP on POWERPC_EXCP_TRAP
remove stale "not threadsafe" comments

# gpg: Signature made Tue 08 Mar 2022 15:02:14 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/lvivier-gitlab/tags/linux-user-for-7.0-pull-request:
  tests/tcg/ppc64le: change signal_save_restore_xer to use SIGTRAP
  linux-user/ppc: deliver SIGTRAP on POWERPC_EXCP_TRAP
  linux-user: Remove stale "not threadsafe" comments

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-09 20:01:17 +00:00
Peter Maydell
fdee2c9692 nbd patches for 2022-03-07
- Dan Berrange: Allow qemu-nbd to support TLS over Unix sockets
 - Eric Blake: Minor cleanups related to 64-bit block operations
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmImtE8ACgkQp6FrSiUn
 Q2ovmgf/aksDqf2eNcahs++fez+8Qi9ll5OY/qGyjnzBgsatYKjrK+xF7OnjoJox
 eRX026lh81Q4EQK7oZBUnr2UCY4bncDBTI7MTLh603EV/tId5ZLwx007ERhzvtC1
 mIsQHXNuO9X25LQG2eWnfunY9YztQpiT5r/g3khD2yPBqJWIvBfblzPLx6FkF7px
 /WM8xEKCihmGr1Wr3b+zGYL083YkaBWCvHoR8mJt3tEFUj+Qie8XcdV0OVyI0XUj
 5goIFRcpVwBE8P2nLtfUKNzEXz22cmdonOJUX7E5IvGO21k5F/HrWlHdo8JnuSUZ
 t0w5L9yCxBrRpY1burz30b77J0WMCw==
 =C8Dd
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2022-03-07' into staging

nbd patches for 2022-03-07

- Dan Berrange: Allow qemu-nbd to support TLS over Unix sockets
- Eric Blake: Minor cleanups related to 64-bit block operations

# gpg: Signature made Tue 08 Mar 2022 01:41:35 GMT
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2022-03-07:
  qemu-io: Allow larger write zeroes under no fallback
  qemu-io: Utilize 64-bit status during map
  nbd/server: Minor cleanups
  tests/qemu-iotests: validate NBD TLS with UNIX sockets and PSK
  tests/qemu-iotests: validate NBD TLS with UNIX sockets
  tests/qemu-iotests: validate NBD TLS with hostname mismatch
  tests/qemu-iotests: convert NBD TLS test to use standard filters
  tests/qemu-iotests: introduce filter for qemu-nbd export list
  tests/qemu-iotests: expand _filter_nbd rules
  tests/qemu-iotests: add QEMU_IOTESTS_REGEN=1 to update reference file
  block/nbd: don't restrict TLS usage to IP sockets
  qemu-nbd: add --tls-hostname option for TLS certificate validation
  block/nbd: support override of hostname for TLS certificate validation
  block: pass desired TLS hostname through from block driver client
  crypto: mandate a hostname when checking x509 creds on a client

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-09 11:38:29 +00:00
Peter Maydell
f14ad81eed MIPS patches queue
- Fix CP0 cycle counter timing
 - Fix VMState of gt64120 IRQs
 - Long due PIIX4 QOM cleanups
 - ISA IRQ QOM'ification / cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmInou4ACgkQ4+MsLN6t
 wN4GWA/+LzYo63IKZM77NJQWhXxp3ypwS9e8zfF0gbPQWMjXnBYr78dxWemTx4IL
 bKa7JXlKdEqgvt+3MwwmxP6lYbTdxRPnZ5ErarDYDVE3OFKVoFYfWKjqcGbCPYgm
 gERxScsRa/CeSQYW8F04Qme7JE9m4oEbyRbxCrK70VQhEJd1fDYSvOmkqpHfKy/4
 GzaYGE0xkpc7UnMDx7WQ5+22HYan1GS7EsXPkew+ibVVs2rlFWKZTK76TUyvpmdZ
 vW/gZKOLiJykzGT1JCDCEu6pAqFvU5vCZRj83+NSkwaJOFPpSEKsI/u+NTNPqfhj
 9NSZ1f2C6gnCOVq3R3PxkgUZe2IZK1xP2Gn3A65IGmsuu1DoVjif8HgvuBFZfTUW
 XRx2N5KLAWU1LA1UcE7tEryeazZxF9BlsDpspJtjBzcnixLwYz0MqAK64qOxnlzk
 NTYbkgEwjVxjpzSInRbchUM4ZWjkt2niSVwiwCG+hDLocDT9PZzGM+WhhDxTdLc+
 9gWQkWw9JOeLcDSJtvlrrcO/GGF4xG2fBkNveQ2RIaVnHVlN4Z7Kkne75sqzfTdx
 ZxOKPqP5PcN0e2Wwh+mcEx6LVncZbIJ1mds77xRv7dL6Z15BcvyCpU3ZrMqGoyrp
 prr5I/knb80A6WHd8jTiFAf7a+lEbx9duuXkt1EuOoa0Im2EvWQ=
 =+5Rn
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/philmd/tags/mips-20220308' into staging

MIPS patches queue

- Fix CP0 cycle counter timing
- Fix VMState of gt64120 IRQs
- Long due PIIX4 QOM cleanups
- ISA IRQ QOM'ification / cleanups

# gpg: Signature made Tue 08 Mar 2022 18:39:42 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/mips-20220308:
  tests/avocado/linux_ssh_mips_malta.py: add missing accel (tcg) tag
  hw/isa: Inline and remove one-line isa_init_irq()
  hw/isa: Drop unused attributes from ISADevice
  hw/isa/isa-bus: Remove isabus_dev_print()
  hw/input/pckbd: QOM'ify IRQ numbers
  hw/rtc/m48t59-isa: QOM'ify IRQ number
  hw/rtc/mc146818rtc: QOM'ify IRQ number
  hw/mips/gt64xxx_pci: Resolve gt64120_register()
  hw/isa/piix4: Replace some magic IRQ constants
  hw/isa/piix4: Resolve global instance variable
  hw/isa/piix4: Pass PIIX4State as opaque parameter for piix4_set_irq()
  hw/isa/piix4: Resolve redundant i8259[] attribute
  malta: Move PCI interrupt handling from gt64xxx_pci to piix4
  hw/mips/gt64xxx_pci: Fix PCI IRQ levels to be preserved during migration
  target/mips: Remove duplicated MIPSCPU::cp0_count_rate
  target/mips: Fix cycle counter timing calculations

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-09 09:13:39 +00:00
Peter Maydell
9f0369efb0 virtio,pc,pci: features, cleanups, fixes
vhost-user enabled on non-linux systems
 beginning of nvme sriov support
 bigger tx queue for vdpa
 virtio iommu bypass
 FADT flag to detect legacy keyboards
 
 Fixes, cleanups all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmImipMPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpD5AH/jz73VVDE3dZTtsdEH/f2tuO8uosur9fIjHJ
 nCMwBoosdDWmrWjrwxynmG6e+qIcOHEGdTInvS1TY2OTU+elNNTiR57pWiljXRsJ
 2kNIXKp4dXaYI/bxmKUzKSoVscyWxL686ND4U8sZhuppSNrWpLmMUNgwqmYjQQLV
 yd2JpIKgZYnzShPnJMDtF3ItcCHetY6jeB28WAclKywIEuCTmjulYCTaH5ujroG9
 rykMaQIjoe/isdmCcBx05UuMxH61vf5L8pR06N6e3GO9T2/Y/hWuteVoEJaCQvNa
 +zIyL2hOjGuMKr+icLo9c42s3yfwWNsRfz87wqdAY47yYSyc1wo=
 =3NVe
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc,pci: features, cleanups, fixes

vhost-user enabled on non-linux systems
beginning of nvme sriov support
bigger tx queue for vdpa
virtio iommu bypass
FADT flag to detect legacy keyboards

Fixes, cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 07 Mar 2022 22:43:31 GMT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (47 commits)
  hw/acpi/microvm: turn on 8042 bit in FADT boot architecture flags if present
  tests/acpi: i386: update FACP table differences
  hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table
  tests/acpi: i386: allow FACP acpi table changes
  docs: vhost-user: add subsection for non-Linux platforms
  configure, meson: allow enabling vhost-user on all POSIX systems
  vhost: use wfd on functions setting vring call fd
  event_notifier: add event_notifier_get_wfd()
  pci: drop COMPAT_PROP_PCP for 2.0 machine types
  hw/smbios: Add table 4 parameter, "processor-id"
  x86: cleanup unused compat_apic_id_mode
  vhost-vsock: detach the virqueue element in case of error
  pc: add option to disable PS/2 mouse/keyboard
  acpi: pcihp: pcie: set power on cap on parent slot
  pci: expose TYPE_XIO3130_DOWNSTREAM name
  pci: show id info when pci BDF conflict
  hw/misc/pvpanic: Use standard headers instead
  headers: Add pvpanic.h
  pci-bridge/xio3130_downstream: Fix error handling
  pci-bridge/xio3130_upstream: Fix error handling
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	docs/specs/index.rst
2022-03-08 22:27:34 +00:00
Cleber Rosa
bc401b97eb tests/avocado/linux_ssh_mips_malta.py: add missing accel (tcg) tag
Being explicit about the accelerator used on these tests is a good
thing in itself, but it will also be used in the filtering rules
applied on "make check-avocado".

Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220225210156.2032055-6-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08 19:38:17 +01:00
Bernhard Beschow
27b4cfb94f hw/isa/isa-bus: Remove isabus_dev_print()
All isabus_dev_print() did was to print up to two IRQ numbers per
device. This is redundant if the IRQ numbers are present as QOM
properties (see e.g. the modified tests/qemu-iotests/172.out).

Now that the last devices relying on isabus_dev_print() had their IRQ
numbers QOM'ified, the contribution of this function ultimately became
redundant. Remove it.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-12-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
2022-03-08 19:38:17 +01:00
Titus Rwantare
5f14cd7032 hw/sensor: add Renesas raa228000 device
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20220307200605.4001451-10-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08 18:46:48 +01:00
Titus Rwantare
1c0c52f762 hw/sensor: add Renesas raa229004 PMBus device
The Renesas RAA229004 is a PMBus Multiphase Voltage Regulator

Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20220307200605.4001451-9-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08 18:46:48 +01:00
Titus Rwantare
ffcdae677e hw/sensor: add Intersil ISL69260 device model
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <20220307200605.4001451-8-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08 18:46:48 +01:00
Peter Maydell
9a61e6c7e1 * Fixes for s390x TCG tests
* Update Haiku VM to a usable level
 * Some other miscellaneous small fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmImScQRHHRodXRoQHJl
 ZGhhdC5jb20ACgkQLtnXdP5wLbV+/g//Qtf04mDw/+ICaXcQVq3UGvjjWCtkXa0H
 +MGdkz/gde43dyRM7a8vaFdH7DIuQZvy7vjbSLXcUdVmmquVlN8WBRFVdl6J2zcc
 0V5zI3B9BvfiQjwKrsGsn/yXeR2qwTlaDP60+2ZD1ea5C7tQNsnU8gD1stymrQmR
 awjRAzJo3PiT6MpEze5y9+ugfmF9wRatNzeazUJ0bSRznNQCQWQ42WiIEfRbdFo0
 oXsZB6rP3mmp0XKiUkNmWwBLvlkXgR7Or7XcIEslqSJEbYonroPoEtPSlIPCeHYA
 XVC29xca8bLqT4nDi2SAGVrcgySI9tT+ogZOf06/aIO+IGTYyxg58Iqx1LQxgpyq
 542oeAfGHtiF1SzkBy3VZzafti76dPJDkoUS8pygBHZFPxLIJF2pBifJAEC33+89
 TCm1yzlXbut73l+K3vWN9YjgYldrPv+n04TeOO3iYnnAT35vHTtE+JKTWLYGPYjA
 5c9IzaLmPEnBAmGxUbtRDGPMqZoMBIfiKAtb1wWKwrww2mTxjo/WkYidLGB73PCF
 Js/7kitrXKBWurS6RHLKXKF7pQ0l4lPyVTXLTwLpE7If4nh3v80olxAHXMtRM5pl
 mWf43EXnlWF5kvCT/OUucei0L2GxTlk25dfcipT7zudoiBc1eB1LbRYNRGabIUxM
 WAd/Gzuv9S8=
 =SY3w
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-03-07' into staging

* Fixes for s390x TCG tests
* Update Haiku VM to a usable level
* Some other miscellaneous small fixes

# gpg: Signature made Mon 07 Mar 2022 18:07:00 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2022-03-07:
  Check and report for incomplete 'global' option format
  tests/vm: Update haiku test vm to R1/Beta3
  tests/avocado: Cancel BootLinux tests in case there is no free port
  MAINTAINERS: Update the files in the FreeBSD section
  tests/tcg/s390x: Cleanup of mie3 tests.
  tests/tcg/s390x: Fix the exrl-trt* tests with Clang
  tests/tcg/s390x: Fix mvc, mvo and pack tests with Clang

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-08 17:09:18 +00:00
Peter Maydell
9740b907a5 target-arm queue:
* cleanups of qemu_oom_check() and qemu_memalign()
  * target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
  * target/arm/translate-neon: Simplify align field check for VLD3
  * GICv3 ITS: add more trace events
  * GICv3 ITS: implement 8-byte accesses properly
  * GICv3: fix minor issues with some trace/log messages
  * ui/cocoa: Use the standard about panel
  * target/arm: Provide cpu property for controling FEAT_LPA2
  * hw/arm/virt: Disable LPA2 for -machine virt-6.2
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmImNs4ZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3q87D/0cMQeF00uVRNqftrQg2SDI
 txJIG2QYUOPMCDfGWlGTfXv2TUc5y3XwA77C9vTcJcIWJlZ30DUa95DNYqA0BbOH
 TEOzRuZME64wA/JndHadz7oh+xb3HYn+6aSr63LeQCI3/h1eXVHknnEcyF1danOb
 YNB1T308THTEwJHQuKHYksIasgVwcjOf8FvMRYFozVkAKEx1SlabpFXST+aVNyx4
 ASsC2PTiJYAqwnYrTX8lWOYKMiKfkNrQcTd6x7rkoDw1pV7ZDMw2/69tpkhdJ5Fa
 lwxhwZ3+40x49eFGAhfuZWZmGLd4c+76u64pmWW429uk1JhaoXgErJM3xfHbI1er
 d7XSQYkMhDrY5SFuoE5XYwOuxanPtn3f7luM236Uzgf4ZR6qTrf6x+R1xLPZVYa9
 fWbjvR3g5sltTOzyc+9UsBq1OPCbRUbmhJtJDvojj5sWmNvgOwZnSkTu5kMAqvFP
 T2cQIi6phRBo3oMN/fhEZi3g828JjYEA9QlpWZ74JOyiXjYUq9VVNpoe/dtAv4Yy
 wZ+XhVNIK82/4Mxjr9SEeYeNzYrsEEvFAUqe9Bil2CpuIMV5ONEzs+UfQ/gyk4eq
 QnGPiojCrpf6PPAfci0Y6b4RzO+loMFpLjCpurngB4g4cBdmThKip0sVZdTZAI9Y
 lnusB8MR1sESoqYdPZsAfQ==
 =ix0J
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220307' into staging

target-arm queue:
 * cleanups of qemu_oom_check() and qemu_memalign()
 * target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
 * target/arm/translate-neon: Simplify align field check for VLD3
 * GICv3 ITS: add more trace events
 * GICv3 ITS: implement 8-byte accesses properly
 * GICv3: fix minor issues with some trace/log messages
 * ui/cocoa: Use the standard about panel
 * target/arm: Provide cpu property for controling FEAT_LPA2
 * hw/arm/virt: Disable LPA2 for -machine virt-6.2

# gpg: Signature made Mon 07 Mar 2022 16:46:06 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20220307:
  hw/arm/virt: Disable LPA2 for -machine virt-6.2
  target/arm: Provide cpu property for controling FEAT_LPA2
  ui/cocoa: Use the standard about panel
  hw/intc/arm_gicv3_cpuif: Fix register names in ICV_HPPIR read trace event
  hw/intc/arm_gicv3: Fix missing spaces in error log messages
  hw/intc/arm_gicv3: Specify valid and impl in MemoryRegionOps
  hw/intc/arm_gicv3_its: Add trace events for table reads and writes
  hw/intc/arm_gicv3_its: Add trace events for commands
  target/arm/translate-neon: Simplify align field check for VLD3
  target/arm/translate-neon: UNDEF if VLD1/VST1 stride bits are non-zero
  osdep: Move memalign-related functions to their own header
  util: Put qemu_vfree() in memalign.c
  util: Use meson checks for valloc() and memalign() presence
  util: Share qemu_try_memalign() implementation between POSIX and Windows
  meson.build: Don't misdetect posix_memalign() on Windows
  util: Return valid allocation for qemu_try_memalign() with zero size
  util: Unify implementations of qemu_memalign()
  util: Make qemu_oom_check() a static function

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-08 15:26:10 +00:00
Matheus Ferst
62089c849d tests/tcg/ppc64le: change signal_save_restore_xer to use SIGTRAP
Now that linux-user delivers the signal on tw, we can change
signal_save_restore_xer to use SIGTRAP instead of SIGILL.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220113170456.1796911-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-03-08 16:01:08 +01:00
Peter Maydell
f45cc81911 9pfs: introduce macOS host support and cleanup
* Add support for Darwin (a.k.a. macOS) hosts.
 
 * Code cleanup (move qemu_dirent_dup() from osdep -> 9p-util).
 
 * API doc cleanup (convert Doxygen -> kerneldoc format).
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmIl6SUXHHFlbXVfb3Nz
 QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5WIAg//fAigCqLTYGL1MzOILppRXfJa
 3XBdCogLT8m0y+DFoCXgwQx4VU05xPj69633e6nmm4tuyhqMqiIjVQl8EZfH89wD
 vK3NlMJxevkK8soiOB91iyUD0LifrsdS7RwLF4XQmQ+tQbu6p+zLBjDBHYQScyUh
 Tms0YD5A+ubWb5s8fZ0NS+zi3GXUAKhnxtypHQjelsL492uXBOdVs+F3a/gCHzhq
 SyRJn0rdJ+MWZP4QYTpAeOC1YkYd4D52nuuLE4SY/lf3XdHIcUSVAKdWkEuJUAQC
 u7miCqmkXAjfiiu4/vIGeL2nSwApF6hNAckIoaH6jt3xZEeINmw612oO6uG5Ra3R
 AqAT1wNASf4e36Ee26pIwcbHVk0fTBjpmaTmlwb9ts1kSaCW5clopvQSkQuER9cz
 zqGZqD6uWSkfOFaGuLc6ai4/jkxeaM+7liALcXsm68/AnF/5zWPLsF73OrZDjA1H
 VXVg43+686HRBaHez1eLGmM4dJxlglgVEO35+rPeuztRtwL81v+RhBDcQWsjsxY1
 FO5V9LddpfvXgPNlcFNd3+PQnNzy7t4Oz1GKbRZ/bM9hv5+XiObUq+GuO4FvvrLj
 tmICJ7RYmV91H7MK5bFG1HA1qkdJkXu1GvW6x/knjnSKo6RhEAudDQZhrdjVGjVD
 vfDxPB4jHm0tKbIbtuU=
 =Fikk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20220307' into staging

9pfs: introduce macOS host support and cleanup

* Add support for Darwin (a.k.a. macOS) hosts.

* Code cleanup (move qemu_dirent_dup() from osdep -> 9p-util).

* API doc cleanup (convert Doxygen -> kerneldoc format).

# gpg: Signature made Mon 07 Mar 2022 11:14:45 GMT
# gpg:                using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg:                issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38  4926 30DB 47C3 A012 D5F4
#      Subkey fingerprint: 96D8 D110 CF7A F808 4F88  5901 34C2 B587 65A4 7395

* remotes/cschoenebeck/tags/pull-9p-20220307:
  fsdev/p9array.h: convert Doxygen -> kerneldoc format
  9pfs/coth.h: drop Doxygen format on v9fs_co_run_in_worker()
  9pfs/9p-util.h: convert Doxygen -> kerneldoc format
  9pfs/9p.c: convert Doxygen -> kerneldoc format
  9pfs/codir.c: convert Doxygen -> kerneldoc format
  9pfs/9p.h: convert Doxygen -> kerneldoc format
  9pfs: drop Doxygen format from qemu_dirent_dup() API comment
  9pfs: move qemu_dirent_dup() from osdep -> 9p-util
  9p: darwin: meson: Allow VirtFS on Darwin
  9p: darwin: Adjust assumption on virtio-9p-test
  9p: darwin: Implement compatibility for mknodat
  9p: darwin: Compatibility for f/l*xattr
  9p: darwin: *xattr_nofollow implementations
  9p: darwin: Move XATTR_SIZE_MAX->P9_XATTR_SIZE_MAX
  9p: darwin: Ignore O_{NOATIME, DIRECT}
  9p: darwin: Handle struct dirent differences
  9p: darwin: Handle struct stat(fs) differences
  9p: Rename 9p-util -> 9p-util-linux
  9p: linux: Fix a couple Linux assumptions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-08 09:06:57 +00:00
Daniel P. Berrangé
10cc95c38f tests/qemu-iotests: validate NBD TLS with UNIX sockets and PSK
This validates that connections to an NBD server running on a UNIX
socket can use TLS with pre-shared keys (PSK).

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-13-berrange@redhat.com>
[eblake: squash in rebase fix]
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2022-03-07 17:13:31 -06:00
Daniel P. Berrangé
f0620835c5 tests/qemu-iotests: validate NBD TLS with UNIX sockets
This validates that connections to an NBD server running on a UNIX
socket can use TLS, and require a TLS hostname override to pass
certificate validation.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-12-berrange@redhat.com>
[eblake: squash in rebase fix]
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2022-03-07 17:13:15 -06:00
Daniel P. Berrangé
3da93d4bc6 tests/qemu-iotests: validate NBD TLS with hostname mismatch
This validates that connections to an NBD server where the certificate
hostname does not match will fail. It further validates that using the
new 'tls-hostname' override option can solve the failure.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-11-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2022-03-07 17:12:55 -06:00
Daniel P. Berrangé
ebc0141ba7 tests/qemu-iotests: convert NBD TLS test to use standard filters
Using standard filters is more future proof than rolling our own.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-10-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2022-03-07 17:12:55 -06:00
Daniel P. Berrangé
9960fda9fa tests/qemu-iotests: introduce filter for qemu-nbd export list
Introduce a filter for the output of qemu-nbd export list so it can be
reused in multiple tests.

The filter is a bit more permissive that what test 241 currently uses,
as its allows printing of the export count, along with any possible
error messages that might be emitted.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-9-berrange@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2022-03-07 17:12:45 -06:00
Daniel P. Berrangé
7470bf87d3 tests/qemu-iotests: expand _filter_nbd rules
Some tests will want to use 'localhost' instead of '127.0.0.1', and
some will use the image options syntax rather than the classic URI
syntax.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-8-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2022-03-07 15:58:42 -06:00
Daniel P. Berrangé
cf168e398b tests/qemu-iotests: add QEMU_IOTESTS_REGEN=1 to update reference file
When developing an I/O test it is typical to add some logic to the
test script, run it to view the output diff, and then apply the
output diff to the reference file. This can be drastically simplified
by letting the test runner update the reference file in place.

By setting 'QEMU_IOTESTS_REGEN=1', the test runner will report the
failure and show the diff, but at the same time update the reference
file. So next time the I/O test is run it will succeed.

Continuing to display the diff when updating the reference gives the
developer a chance to review what was changed.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-7-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2022-03-07 15:58:42 -06:00
Peter Maydell
99c4a9e68e - Re-org accel/ and softmmu/ to have more target-agnostic objects.
- Use CPUArchState as an abstract type, defined by each target
   (CPUState is our interface with generic code, CPUArchState is
    our interface with target-specific code).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmIlQmcACgkQ4+MsLN6t
 wN59LRAAv69CO8UQj3FJs3igxVFrygcoYb9ywHd69tShLPrBo3204dHph67xzYDw
 yZwTAftpVvoLsveQGivrMIl76f0Sg2RmxNgcIWQsPwYC9PI4BPbnZpRA7s4o5eZA
 kLsSMEdhQoEAwysunu6uQMpbz7ZB5w2opb+hB++63khgsz+tyoCnsbxn7DVIgmX8
 qg3N/SqFxsptf7NVNIAR7S6LmuW2ii7FnkvG4pO4fqW22omgXsw2Cj/KL+j2vaPX
 GSMEX2ugEh77AKROr9OiXkLmiLaaF2BWQOlgOEKLfUE3nGaTtqGl3Wd8fv3FYVgH
 a4g9+ceEDnTzW+hLQoWn8XKAKuC00pXZNTh/4iqR7gkah+rIdxtVLSN6YEHu5dr+
 EQRdNJdJqHUTjtuuq9UF7U9NZuDgESmOqloIpBMkgDfgd+PoWvjnc+kjy4x3Wfog
 3+cV62Cb91oHVMzSVskeeO/TEDxUFI4Zl18SR3M6MLUBANFW1YPNDUqSqN8zLdmd
 w0ehd6+PBplH7JlWcdd2cam+4chO9tv0MrBD7Ty1UitDiFEP1oSkEyRzoHa8cUcb
 Rz7Aa9noQJ6jSjrYaVoYcENnQxtdJd9utcQFY28M8PtOJrw7HRMtS8WQi0nsRcWq
 o6NJ/58EJ/SAGH1+qX+LTr/IUmnFiW1XhEWpJoUjb+lmmCfdtOM=
 =bOxK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/philmd/tags/abstract-arch-cpu-20220307' into staging

- Re-org accel/ and softmmu/ to have more target-agnostic objects.

- Use CPUArchState as an abstract type, defined by each target
  (CPUState is our interface with generic code, CPUArchState is
   our interface with target-specific code).

# gpg: Signature made Sun 06 Mar 2022 23:23:19 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/abstract-arch-cpu-20220307: (33 commits)
  accel/tcg: Remove pointless CPUArchState casts
  target/i386: Remove pointless CPUArchState casts
  target: Use ArchCPU as interface to target CPU
  target: Introduce and use OBJECT_DECLARE_CPU_TYPE() macro
  target: Use CPUArchState as interface to target-specific CPU state
  target: Use forward declared type instead of structure type
  target/hexagon: Add missing 'hw/core/cpu.h' include
  target: Include missing 'cpu.h'
  Hexagon (target/hexagon) convert to OBJECT_DECLARE_TYPE
  target/i386/tcg/sysemu: Include missing 'exec/exec-all.h' header
  cpu: Add missing 'exec/exec-all.h' and 'qemu/accel.h' headers
  exec/cpu_ldst: Include 'cpu.h' to get target_ulong definition
  meson: Display libfdt as disabled when system emulation is disabled
  softmmu: Build target-agnostic objects once
  softmmu: Add qemu_init_arch_modules()
  exec/cpu: Make address_space_init/reloading_memory_map target agnostic
  exec/gdbstub: Make gdb_exit() / gdb_set_stop_cpu() target agnostic
  misc: Add missing "sysemu/cpu-timers.h" include
  misc: Remove unnecessary "sysemu/cpu-timers.h" include
  softmmu/cpu-timers: Remove unused 'exec/exec-all.h' header
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-07 19:07:44 +00:00
Thomas Huth
63021223ff tests/vm: Update haiku test vm to R1/Beta3
The old image did not have python3 yet, and thus was not usable
for compiling QEMU anymore.

Suggested-by: Alexander von Gluck IV <kallisti5@unixzen.com>
Message-Id: <20220216154208.2985103-1-kallisti5@unixzen.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-03-07 19:00:05 +01:00
Thomas Huth
8c88e1782f tests/avocado: Cancel BootLinux tests in case there is no free port
The BootLinux tests are currently failing with an ugly python
stack trace on my RHEL8 system since they cannot get a free port
(likely due to the firewall settings on my system). Let's properly
check the return value of find_free_port() instead and cancel the
test gracefully if it cannot get a free port.

Message-Id: <20220228114325.818294-1-thuth@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-03-07 18:59:44 +01:00
Richard Henderson
69b2265d5f target/arm: Provide cpu property for controling FEAT_LPA2
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled.  As a workaround for TCG, allow
the feature to be disabled from -cpu max.

Since this kernel bug is present in the Fedora 31 image that
we test in avocado, disable lpa2 on the command-line.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-07 14:32:21 +00:00
Peter Maydell
5df022cf2e osdep: Move memalign-related functions to their own header
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
2022-03-07 13:16:49 +00:00
Will Cohen
d3671fd972 9p: darwin: Adjust assumption on virtio-9p-test
The previous test depended on the assumption that P9_DOTL_AT_REMOVEDIR
and AT_REMOVEDIR have the same value.

While this is true on Linux, it is not true everywhere, and leads to an
incorrect test failure on unlink_at, noticed when adding 9p to darwin:

Received response 7 (RLERROR) instead of 77 (RUNLINKAT)
Rlerror has errno 22 (Invalid argument)
**

ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77) Bail out!

ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77)

Signed-off-by: Fabian Franz <fabianfranz.oss@gmail.com>
[Will Cohen: - Add explanation of patch and description
               of pre-patch test failure]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[Will Cohen: - Move this patch before 9p: darwin: meson
               patch to avoid qtest breakage during
               bisecting]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220227223522.91937-11-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2022-03-07 11:49:31 +01:00
David Miller
8b398296d4 tests/tcg/s390x: Cleanup of mie3 tests.
Adds clobbers and merges remaining separate asm statements.

Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220301214305.2778-1-dmiller423@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[thuth: dropped changes to mie3-compl.c, whitespace fixes]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-03-07 09:44:07 +01:00
Vladimir Sementsov-Ogievskiy
743da0b401 iotests/image-fleecing: test push backup with fleecing
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07 09:33:31 +01:00
Vladimir Sementsov-Ogievskiy
153bab4d4c iotests/image-fleecing: add test case with bitmap
Note that reads zero areas (not dirty in the bitmap) fails, that's
correct.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07 09:33:31 +01:00
Vladimir Sementsov-Ogievskiy
308c6abf73 iotests.py: add qemu_io_pipe_and_status()
Add helper that returns both status and output, to be used in the
following commit

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07 09:33:31 +01:00
Vladimir Sementsov-Ogievskiy
3927e5c5c8 iotests/image-fleecing: add test-case for fleecing format node
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07 09:33:31 +01:00
Vladimir Sementsov-Ogievskiy
af5bcd775f block: copy-before-write: realize snapshot-access API
Current scheme of image fleecing looks like this:

[guest]                    [NBD export]
  |                              |
  |root                          | root
  v                              v
[copy-before-write] -----> [temp.qcow2]
  |                 target  |
  |file                     |backing
  v                         |
[active disk] <-------------+

 - On guest writes copy-before-write filter copies old data from active
   disk to temp.qcow2. So fleecing client (NBD export) when reads
   changed regions from temp.qcow2 image and unchanged from active disk
   through backing link.

This patch makes possible new image fleecing scheme:

[guest]                   [NBD export]
   |                            |
   | root                       | root
   v                 file       v
[copy-before-write]<------[snapshot-access]
   |           |
   | file      | target
   v           v
[active-disk] [temp.img]

 - copy-before-write does CBW operations and also provides
   snapshot-access API. The API may be accessed through
   snapshot-access driver.

Benefits of new scheme:

1. Access control: if remote client try to read data that not covered
   by original dirty bitmap used on copy-before-write open, client gets
   -EACCES.

2. Discard support: if remote client do DISCARD, this additionally to
   discarding data in temp.img informs block-copy process to not copy
   these clusters. Next read from discarded area will return -EACCES.
   This is significant thing: when fleecing user reads data that was
   not yet copied to temp.img, we can avoid copying it on further guest
   write.

3. Synchronisation between client reads and block-copy write is more
   efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag
   used for writes to temp.qcow2. New scheme is less blocking:
     - fleecing reads are never blocked: if data region is untouched or
       in-flight, we just read from active-disk, otherwise we read from
       temp.img
     - writes to temp.img are not blocked by fleecing reads
     - still, guest writes of-course are blocked by in-flight fleecing
       reads, that currently read from active-disk - it's the minimum
       necessary blocking

4. Temporary image may be of any format, as we don't rely on backing
   feature.

5. Permission relation are simplified. With old scheme we have to share
   write permission on target child of copy-before-write, otherwise
   backing link conflicts with copy-before-write file child write
   permissions. With new scheme we don't have backing link, and
   copy-before-write node may have unshared access to temporary node.
   (Not realized in this commit, will be in future).

6. Having control on fleecing reads we'll be able to implement
   alternative behavior on failed copy-before-write operations.
   Currently we just break guest request (that's a historical behavior
   of backup). But in some scenarios it's a bad behavior: better
   is to drop the backup as failed but don't break guest request.
   With new scheme we can simply unset some bits in a bitmap on CBW
   failure and further fleecing reads will -EACCES, or something like
   this. (Not implemented in this commit, will be in future)
   Additional application for this is implementing timeout for CBW
   operations.

Iotest 257 output is updated, as two more bitmaps now live in
copy-before-write filter.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07 09:33:31 +01:00
Hanna Reitz
1a8fcca03f iotests: Write test output to TEST_DIR
Drop the use of OUTPUT_DIR (test/qemu-iotests under the build
directory), and instead write test output files (.out.bad, .notrun, and
.casenotrun) to TEST_DIR.

With this, the same test can be run concurrently without the separate
instances interfering, because they will need separate TEST_DIRs anyway.
Running the same test separately is useful when running the iotests with
various format/protocol combinations in parallel, or when you just want
to aggressively exercise a single test (e.g. when it fails only
sporadically).

Putting this output into TEST_DIR means that it will stick around for
inspection after the test run is done (though running the same test in
the same TEST_DIR will overwrite it, just as it used to be); but given
that TEST_DIR is a scratch directory, it should be clear that users can
delete all of its content at any point.  (And if TEST_DIR is on tmpfs,
it will just disappear on shutdown.)  Contrarily, alternative approaches
that would put these output files into OUTPUT_DIR with some prefix to
differentiate between separate test runs might easily lead to cluttering
OUTPUT_DIR.

(This change means OUTPUT_DIR is no longer written to by the iotests, so
we can drop its usage altogether.)

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220221172909.762858-1-hreitz@redhat.com>
[hreitz: Simplified `Path(os.path.join(x, y))` to `Path(x, y)`, as
         suggested by Vladimir; and rebased on 9086c76398
         ("tests/qemu-iotests: Rework the checks and spots using GNU
         sed")]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2022-03-07 09:32:28 +01:00
Thomas Huth
db4b2133b8 tests/qemu-iotests/testrunner: Quote "case not run" lines in TAP mode
In TAP mode, the stdout is reserved for the TAP protocol, so we
have to make sure to mark other lines with a comment '#' character
at the beginning to avoid that the TAP parser at the other end
gets confused.

To test this condition, run "configure" for example with:

 --block-drv-rw-whitelist=copy-before-write,qcow2,raw,file,host_device,blkdebug,null-co,copy-on-read

so that iotest 041 will report that some tests are not run due to
the missing "quorum" driver. Without this change, "make check-block"
fails since the meson tap parser gets confused by these messages.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223124353.3273898-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07 09:19:20 +01:00
Thomas Huth
024354ea91 tests/qemu-iotests/040: Skip TestCommitWithFilters without 'throttle'
iotest 040 already has some checks for the availability of the 'throttle'
driver, but some new code has been added in the course of time that
depends on 'throttle' but does not check for its availability. Add
a check to the TestCommitWithFilters class so that this iotest now
also passes again if 'throttle' has not been enabled in the QEMU
binaries.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223123127.3206042-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-07 09:19:20 +01:00
Thomas Huth
2b4e8cf050 tests/tcg/s390x: Fix the exrl-trt* tests with Clang
The exrl-trt* tests use two pre-initialized variables for the
results of the assembly code:

    uint64_t r1 = 0xffffffffffffffffull;
    uint64_t r2 = 0xffffffffffffffffull;

But then the assembly code copies over the full contents
of the register into the output variable, without taking
care of this pre-initialized values:

        "    lgr %[r1],%%r1\n"
        "    lgr %[r2],%%r2\n"

The code then finally compares the register contents to
a value that apparently depends on the pre-initialized values:

    if (r2 != 0xffffffffffffffaaull) {
        write(1, "bad r2\n", 7);
        return 1;
    }

This all works with GCC, since the 0xffffffffffffffff got into
the r2 register there by accident, but it fails completely with
Clang.

Let's fix this by declaring the r1 and r2 variables as proper
register variables instead, so the pre-initialized values get
correctly passed into the inline assembly code.

Message-Id: <20220301092431.1448419-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-03-07 09:06:32 +01:00
Thomas Huth
f530ba8f8d tests/tcg/s390x: Fix mvc, mvo and pack tests with Clang
These instructions use addressing with a "base address", meaning
that if register r0 is used, it is always treated as zero, no matter
what value is stored in the register. So we have to make sure not
to use register r0 for these instructions in our tests. There was
no problem with GCC so far since it seems to always pick other
registers by default, but Clang likes to chose register r0, too,
so we have to use the "a" constraint to make sure that it does
not pick r0 here.

Message-Id: <20220301093911.1450719-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-03-07 09:04:42 +01:00
Liav Albani
5f051fdb35 tests/acpi: i386: update FACP table differences
After changing the IAPC boot flags register to indicate support of i8042
in the machine chipset to help the guest OS to determine its existence
"faster", we need to have the updated FACP ACPI binary images in tree.

The ASL changes introduced are shown by the following diff:

@@ -42,35 +42,35 @@
 [059h 0089   1]     PM1 Control Block Length : 02
 [05Ah 0090   1]     PM2 Control Block Length : 00
 [05Bh 0091   1]        PM Timer Block Length : 04
 [05Ch 0092   1]            GPE0 Block Length : 10
 [05Dh 0093   1]            GPE1 Block Length : 00
 [05Eh 0094   1]             GPE1 Base Offset : 00
 [05Fh 0095   1]                 _CST Support : 00
 [060h 0096   2]                   C2 Latency : 0FFF
 [062h 0098   2]                   C3 Latency : 0FFF
 [064h 0100   2]               CPU Cache Size : 0000
 [066h 0102   2]           Cache Flush Stride : 0000
 [068h 0104   1]            Duty Cycle Offset : 00
 [069h 0105   1]             Duty Cycle Width : 00
 [06Ah 0106   1]          RTC Day Alarm Index : 00
 [06Bh 0107   1]        RTC Month Alarm Index : 00
 [06Ch 0108   1]            RTC Century Index : 32
-[06Dh 0109   2]   Boot Flags (decoded below) : 0000
+[06Dh 0109   2]   Boot Flags (decoded below) : 0002
                Legacy Devices Supported (V2) : 0
-            8042 Present on ports 60/64 (V2) : 0
+            8042 Present on ports 60/64 (V2) : 1
                         VGA Not Present (V4) : 0
                       MSI Not Supported (V4) : 0
                 PCIe ASPM Not Supported (V4) : 0
                    CMOS RTC Not Present (V5) : 0
 [06Fh 0111   1]                     Reserved : 00
 [070h 0112   4]        Flags (decoded below) : 000084A5
       WBINVD instruction is operational (V1) : 1
               WBINVD flushes all caches (V1) : 0
                     All CPUs support C1 (V1) : 1
                   C2 works on MP system (V1) : 0
             Control Method Power Button (V1) : 0
             Control Method Sleep Button (V1) : 1
         RTC wake not in fixed reg space (V1) : 0
             RTC can wake system from S4 (V1) : 1
                         32-bit PM Timer (V1) : 0
                       Docking Supported (V1) : 0

Signed-off-by: Liav Albani <liavalb@gmail.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-4-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06 16:06:16 -05:00
Liav Albani
43b6277ac2 tests/acpi: i386: allow FACP acpi table changes
The FACP table is going to be changed for x86/q35 machines. To be sure
the following changes are not breaking any QEMU test this change follows
step 2 from the bios-tables-test.c guide on changes that affect ACPI
tables.

Signed-off-by: Liav Albani <liavalb@gmail.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06 16:06:16 -05:00
Philippe Mathieu-Daudé
b57dfb0f30 misc: Remove unnecessary "sysemu/cpu-timers.h" include
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-17-f4bug@amsat.org>
2022-03-06 13:15:42 +01:00
Jean-Philippe Brucker
25a289f4c0 tests/qtest/virtio-iommu-test: Check bypass config
The bypass config field should be initialized to 1 by default.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220214124356.872985-5-jean-philippe@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
2022-03-06 05:08:23 -05:00
Peter Maydell
9d662a6b22 ppc-7.0 queue :
* Clang fixes
 * Vector/VSX instruction batch fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmIjHL4ACgkQUaNDx8/7
 7KH+sg/+JZW/X+U7uZRT9vK6vS4jqFG7gn55ouZKSvAQtPUMtUFdkEL/jeA3IuHh
 kRvmjGwWjtjgM9TIiJsVBo8yJeMqUO8f6AKUtaQU/3vT4CPO2Jbd8X0A58OOoe4I
 M3fzWf/18bAYPPEZAxmlJ8f8LEPsBOLM0tQ2py7JkVpUQU3WcP7/YgXbYRH1l+9k
 m1lMyXGZ/dQDxkFel9TGcfuHXVecBngyx4O1pJ1JkHduo+bLAi6h5HJgdj1wEVfr
 5vyqn7OULm6bPXWRb1j+CnCj0QO0VAky4hC4HDGajMlcnG8l/X8Dzs2bD+ua/VbE
 1aNkVpuNtuu0ljKfarqMED2no8lPJg4MpKOZvi8O128/bU+IkmJUYI2g73Gr6URL
 V6/Awh0syy9mi04gsXMD5kCwFLuBNQ5jC3z1aAZNy7Be/l37vzAoN0i53eYAGK3D
 rBTuMictAKRXKyXQ63VLiYqSdUB6zVoOIM6w3HJxQTQ8YkJ/Hx5cfOGv+lnTIdsK
 cX4e7s1p8YPSnDOEfEKTk+gnVcTn57FAhNJhelRuC1s2/OI8Gz4n+3eUGmcl04Bq
 +gcD1UEGMEsQpjMz+ikPuGMZvmF5gPr+9S3DPyMfUOoQJFUI8GOxq9SmUVKC9fki
 6oHTHpOvZg8MSJz8gzETq18hwHRKoRb95KzVHWGj1EG0ekjHG2U=
 =C+wh
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220305' into staging

ppc-7.0 queue :

* Clang fixes
* Vector/VSX instruction batch fixes

# gpg: Signature made Sat 05 Mar 2022 08:18:06 GMT
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-ppc-20220305:
  target/ppc: Add missing helper_reset_fpstatus to helper_XVCVSPBF16
  target/ppc: Add missing helper_reset_fpstatus to VSX_MAX_MINC
  target/ppc: split XXGENPCV macros for readability
  target/ppc: use andc in vrlqmi
  target/ppc: use extract/extract2 to create vrlqnm mask
  target/ppc: use ext32u and deposit in do_vx_vmulhw_i64
  target/ppc: Fix vmul[eo]* instructions marked 2.07
  tests/tcg/ppc64le: Use Altivec register names in clobber list
  tests/tcg/ppc64le: emit bcdsub with .long when needed
  tests/tcg/ppc64le: drop __int128 usage in bcdsub
  target/ppc: change xs[n]madd[am]sp to use float64r32_muladd
  tests/tcg/ppc64le: use inline asm instead of __builtin_mtfsf
  Use long endian options for ppc64

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-05 18:03:15 +00:00
Matheus Ferst
68455cf593 tests/tcg/ppc64le: Use Altivec register names in clobber list
LLVM/Clang doesn't know the VSX registers when compiling with
-mabi=elfv1. Use only registers >= 32 and list them with their Altivec
name.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05 07:16:46 +01:00
Matheus Ferst
63c2b746be tests/tcg/ppc64le: emit bcdsub with .long when needed
Based on GCC docs[1], we use the '-mpower8-vector' flag at config-time
to detect the toolchain support to the bcdsub instruction. LLVM/Clang
supports this flag since version 3.6[2], but the instruction and related
builtins were only added in LLVM 14[3]. In the absence of other means to
detect this support at config-time, we resort to __has_builtin to
identify the presence of __builtin_bcdsub at compile-time. If the
builtin is not available, the instruction is emitted with a ".long".

[1] https://gcc.gnu.org/onlinedocs/gcc-8.3.0/gcc/PowerPC-AltiVec_002fVSX-Built-in-Functions.html
[2] 59eb767e11
[3] c933c2eb33

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05 07:16:46 +01:00
Matheus Ferst
8189cb8507 tests/tcg/ppc64le: drop __int128 usage in bcdsub
Using __int128 with inline asm constraints like "v" generates incorrect
code when compiling with LLVM/Clang (e.g., only one doubleword of the
VSR is loaded). Instead, use a GPR pair to pass the 128-bits value and
load the VSR with mtvsrd/xxmrghd.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05 07:16:46 +01:00
Matheus Ferst
d21939ca8b tests/tcg/ppc64le: use inline asm instead of __builtin_mtfsf
LLVM/Clang does not support __builtin_mtfsf.

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220304165417.1981159-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05 07:16:46 +01:00
Miroslav Rezanina
ced5cfffee Use long endian options for ppc64
GCC options pairs -mlittle/-mlittle-endian and -mbig/-mbig-endian are
equivalent on ppc64 architecture. However, Clang supports only long
version of the options.

Use longer form in configure to properly support both GCC and Clang
compiler. In addition, fix this issue in tcg test configure.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220131091714.4825-1-mrezanin@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-05 07:16:46 +01:00
Thomas Huth
9086c76398 tests/qemu-iotests: Rework the checks and spots using GNU sed
Instead of failing the iotests if GNU sed is not available (or skipping
them completely in the check-block.sh script), it would be better to
simply skip the bash-based tests that rely on GNU sed, so that the other
tests could still be run. Thus we now explicitely use "gsed" (either as
direct program or as a wrapper around "sed" if it's the GNU version)
in the spots that rely on the GNU sed behavior. Statements that use the
"-r" parameter of sed have been switched to use "-E" instead, since this
switch is supported by all sed versions on our supported build hosts
(most also support "-r", but macOS' sed only supports "-E"). With all
these changes in place, we then can also remove the sed checks from the
check-block.sh script, so that "make check-block" can now be run on
systems without GNU sed, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220216125454.465041-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04 18:18:26 +01:00
Hanna Reitz
971bea8089 iotests/graph-changes-while-io: New test
Test the following scenario:
1. Some block node (null-co) attached to a user (here: NBD server) that
   performs I/O and keeps the node in an I/O thread
2. Repeatedly run blockdev-add/blockdev-del to add/remove an overlay
   to/from that node

Each blockdev-add triggers bdrv_refresh_limits(), and because
blockdev-add runs in the main thread, it does not stop the I/O requests.
I/O can thus happen while the limits are refreshed, and when such a
request sees a temporarily invalid block limit (e.g. alignment is 0),
this may easily crash qemu (or the storage daemon in this case).

The block layer needs to ensure that I/O requests to a node are paused
while that node's BlockLimits are refreshed.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220216105355.30729-4-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04 18:18:26 +01:00
Hanna Reitz
ec88eed8d1 iotests: Allow using QMP with the QSD
Add a parameter to optionally open a QMP connection when creating a
QemuStorageDaemon instance.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220216105355.30729-3-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04 18:18:26 +01:00
Hanna Reitz
ad6fe44bea iotests/185: Add post-READY quit tests
185 tests quitting qemu while a block job is active.  It does not
specifically test quitting qemu while a mirror or active commit job is
in its READY phase.

Add two test cases for this, where we respectively mirror or commit to
an external QSD instance, which provides a throttled block device.  qemu
is supposed to cancel the job so that it can quit as soon as possible
instead of waiting for the job to complete (which it did before 6.2).

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303164814.284974-5-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04 18:14:40 +01:00
Stefan Hajnoczi
17c78154b0 rcu: use coroutine TLS macros
RCU may be used from coroutines. Standard __thread variables cannot be
used by coroutines. Use the coroutine TLS macros instead.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220222140150.27240-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04 18:14:40 +01:00
Emanuele Giuseppe Esposito
3b71719462 block: rename bdrv_invalidate_cache_all, blk_invalidate_cache and test_sync_op_invalidate_cache
Following the bdrv_activate renaming, change also the name
of the respective callers.

bdrv_invalidate_cache_all -> bdrv_activate_all
blk_invalidate_cache -> blk_activate
test_sync_op_invalidate_cache -> test_sync_op_activate

No functional change intended.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04 18:14:40 +01:00
Emanuele Giuseppe Esposito
a94750d956 block: introduce bdrv_activate
This function is currently just a wrapper for bdrv_invalidate_cache(),
but in future will contain the code of bdrv_co_invalidate_cache() that
has to always be protected by BQL, and leave the rest in the I/O
coroutine.

Replace all bdrv_invalidate_cache() invokations with bdrv_activate().

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04 18:14:40 +01:00
Emanuele Giuseppe Esposito
c1019d1687 crypto: perform permission checks under BQL
Move the permission API calls into driver-specific callbacks
that always run under BQL. In this case, bdrv_crypto_luks
needs to perform permission checks before and after
qcrypto_block_amend_options(). The problem is that the caller,
block_crypto_amend_options_generic_luks(), can also run in I/O
from .bdrv_co_amend(). This does not comply with Global State-I/O API split,
as permissions API must always run under BQL.

Firstly, introduce .bdrv_amend_pre_run() and .bdrv_amend_clean()
callbacks. These two callbacks are guaranteed to be invoked under
BQL, respectively before and after .bdrv_co_amend().
They take care of performing the permission checks
in the same way as they are currently done before and after
qcrypto_block_amend_options().
These callbacks are in preparation for next patch, where we
delete the original permission check. Right now they just add redundant
control.

Then, call .bdrv_amend_pre_run() before job_start in
qmp_x_blockdev_amend(), so that it will be run before the job coroutine
is created and stay in the main loop.
As a cleanup, use JobDriver's .clean() callback to call
.bdrv_amend_clean(), and run amend-specific cleanup callbacks under BQL.

After this patch, permission failures occur early in the blockdev-amend
job to update a LUKS volume's keys.  iotest 296 must now expect them in
x-blockdev-amend's QMP reply instead of waiting for the actual job to
fail later.

Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220209105452.1694545-2-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220304153729.711387-6-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-03-04 18:14:39 +01:00
Peter Maydell
6629bf78aa target-arm queue:
* mps3-an547: Add missing user ahb interfaces
  * hw/arm/mps2-tz.c: Update AN547 documentation URL
  * hw/input/tsc210x: Don't abort on bad SPI word widths
  * hw/i2c: flatten pca954x mux device
  * target/arm: Support PSCI 1.1 and SMCCC 1.0
  * target/arm: Fix early free of TCG temp in handle_simd_shift_fpint_conv()
  * tests/qtest: add qtests for npcm7xx sdhci
  * Implement FEAT_LVA
  * Implement FEAT_LPA
  * Implement FEAT_LPA2 (but do not enable it yet)
  * Report KVM's actual PSCI version to guest in dtb
  * ui/cocoa.m: Fix updateUIInfo threading issues
  * ui/cocoa.m: Remove unnecessary NSAutoreleasePools
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmIf2PYZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jPkD/91FqRiubeyDEuuV77YMN3y
 AXA0He8FJ4TgfCZ4e9IT2rA5lyYvFdx0c6TUmFKc3JJ2omhP+35sT+7qolsuhKhF
 JHIvULVMakazbna4tanuQN6fTPrdhnUtVdXDTbadvdjzyWtkiMSs/Mn6YT5kmUQ+
 VRrks4GjB3Ckrne/45nNO5fnt9cTP1+36+1nRUk0/4SdK7BnMR332KRMj6NexVdT
 Ae3usp8wcJuwojCiDqkN6ov7LdbjLxKFl2tzyjfHHaOAjBJ4FgyLsR66QtY6BH+8
 O8Uelx6/AYZ8o/CLqgimcG1ZQm8onGktKhMdg95TAWhRHPMWX0BXtVq1nYWt1e2+
 O7ONbJdKYG6V7Qm9+cu8H7kzW7LU+iBabZ3dL3H5cpciuGWtvPT2ASfqTGKUbbyS
 gyC5esy4m4pw+saebMKfLcuNr7DbB+0f7OQnprmfTTecBUdHwtT8s1TRXZF0glQS
 zMzUcbMMWYakdNA+iPH/xRax3+S359W5oq3Q2yqHnrcyNj4kgYKHnhD8IPIsVUQo
 IJwC/T6OwQlUP1s/EdMI1FV63Wz7RTzsUVcVjkQGJOOeA2vOLszm/AUtDDgJhn38
 /J6fN6drkxr69X9H/EjJIRGB4VL13lk/TA1zBTnxr46R2TnI8aLxHrh8G9Ruj2zN
 kosJ1Le5oyzDgz/6xZ0biQ==
 =CUTQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220302' into staging

target-arm queue:
 * mps3-an547: Add missing user ahb interfaces
 * hw/arm/mps2-tz.c: Update AN547 documentation URL
 * hw/input/tsc210x: Don't abort on bad SPI word widths
 * hw/i2c: flatten pca954x mux device
 * target/arm: Support PSCI 1.1 and SMCCC 1.0
 * target/arm: Fix early free of TCG temp in handle_simd_shift_fpint_conv()
 * tests/qtest: add qtests for npcm7xx sdhci
 * Implement FEAT_LVA
 * Implement FEAT_LPA
 * Implement FEAT_LPA2 (but do not enable it yet)
 * Report KVM's actual PSCI version to guest in dtb
 * ui/cocoa.m: Fix updateUIInfo threading issues
 * ui/cocoa.m: Remove unnecessary NSAutoreleasePools

# gpg: Signature made Wed 02 Mar 2022 20:52:06 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20220302: (26 commits)
  ui/cocoa.m: Remove unnecessary NSAutoreleasePools
  ui/cocoa.m: Fix updateUIInfo threading issues
  target/arm: Report KVM's actual PSCI version to guest in dtb
  target/arm: Implement FEAT_LPA2
  target/arm: Advertise all page sizes for -cpu max
  target/arm: Validate tlbi TG matches translation granule in use
  target/arm: Fix TLBIRange.base for 16k and 64k pages
  target/arm: Introduce tlbi_aa64_get_range
  target/arm: Extend arm_fi_to_lfsc to level -1
  target/arm: Implement FEAT_LPA
  target/arm: Implement FEAT_LVA
  target/arm: Prepare DBGBVR and DBGWVR for FEAT_LVA
  target/arm: Honor TCR_ELx.{I}PS
  target/arm: Use MAKE_64BIT_MASK to compute indexmask
  target/arm: Pass outputsize down to check_s2_mmu_setup
  target/arm: Move arm_pamax out of line
  target/arm: Fault on invalid TCR_ELx.TxSZ
  target/arm: Set TCR_EL1.TSZ for user-only
  hw/registerfields: Add FIELD_SEX<N> and FIELD_SDP<N>
  tests/qtest: add qtests for npcm7xx sdhci
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-03 14:46:48 +00:00
Shengtan Mao
4c579e15bd tests/qtest: add qtests for npcm7xx sdhci
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Chris Rauer <crauer@google.com>
Signed-off-by: Shengtan Mao <stmao@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Message-id: 20220225174451.192304-1-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-02 19:27:36 +00:00
Peter Xu
3ff5740187 tests: Pass in MigrateStart** into test_migrate_start()
test_migrate_start() will release the MigrateStart structure that passed
in, however that's not super clear to the caller because after the call
returned the pointer can still be referenced by the callers.  It can easily
be a source of use-after-free.

Let's pass in a double pointer of that, then we can safely clear the
pointer for the caller after the struct is released.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-26-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  dgilbert: Fixup apply since I didn't take 24/25
2022-03-02 18:20:45 +00:00
Peter Maydell
44efeb90b2 Testing and semihosting updates:
- restore TESTS/IMAGES filtering to docker tests
   - add NOUSER to alpine image
   - bump lcitool version
   - move arm64/s390x cross build images to lcitool
   - add aarch32 runner CI scripts
   - expand testing to more vectors
   - update s390x jobs to focal for gitlab/travis
   - disable threadcount for all sh4
   - fix semihosting SYS_HEAPINFO and test
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmIdGJEACgkQ+9DbCVqe
 KkQZYQf+Ndlm651dulO4J55puk8cUOMrCrDvqVkxM/V7ZD4GKyoa9/PstfOspLkQ
 hXNANtfcr7zsXxo7J7PKVpX3y+upxCMLLK9NqHXW3O8mOSoru44caLko6FdmwWkU
 KmoToEM3jgxJxqrE8ijLz1gxo79TVT0m3OyyKlMf9C+Wf4BfUe4NXjt/VMcecrDd
 wKJnvjWyrk67yOyPRDnT2XlG1HdphD90g8xPxiK1tzkEQEWJlojTLSZENQksa1V6
 JBu1mwT/KPodkllzTQcHHjGn4/vsdzFqjqV+8d3xXiSmr/QdeyByUeDhJ7aI4qdY
 aKoX3hoIUdENmPxqXozuVBy/S4gLoA==
 =MY0T
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-semihosting-280222-1' into staging

Testing and semihosting updates:

  - restore TESTS/IMAGES filtering to docker tests
  - add NOUSER to alpine image
  - bump lcitool version
  - move arm64/s390x cross build images to lcitool
  - add aarch32 runner CI scripts
  - expand testing to more vectors
  - update s390x jobs to focal for gitlab/travis
  - disable threadcount for all sh4
  - fix semihosting SYS_HEAPINFO and test

# gpg: Signature made Mon 28 Feb 2022 18:46:41 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-and-semihosting-280222-1:
  tests/tcg: port SYS_HEAPINFO to a system test
  semihosting/arm-compat: replace heuristic for softmmu SYS_HEAPINFO
  tests/tcg: completely disable threadcount for sh4
  gitlab: upgrade the job definition for s390x to 20.04
  travis.yml: Update the s390x jobs to Ubuntu Focal
  tests/tcg: add vectorised sha512 versions
  tests/tcg: add sha512 test
  tests/tcg: build sha1-vector with O3 and compare
  tests/tcg/ppc64: clean-up handling of byte-reverse
  gitlab: add a new aarch32 custom runner definition
  scripts/ci: allow for a secondary runner
  scripts/ci: add build env rules for aarch32 on aarch64
  tests/docker: introduce debian-riscv64-test-cross
  tests/docker: update debian-s390x-cross with lcitool
  tests/docker: update debian-arm64-cross with lcitool
  tests/lcitool: update to latest version
  tests/docker: add NOUSER for alpine image
  tests/docker: restore TESTS/IMAGES filtering

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-02 10:46:16 +00:00
Alex Bennée
b904a9096f tests/tcg: port SYS_HEAPINFO to a system test
This allows us to check our new SYS_HEAPINFO implementation generates
sane values.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220225172021.3493923-19-alex.bennee@linaro.org>
2022-02-28 16:42:42 +00:00
Alex Bennée
04e90c1313 tests/tcg: completely disable threadcount for sh4
The previous disabling of threadcount 3bdc19af00 ("tests/tcg/sh4:
disable another unreliable test") just for plugins was being too
conservative. It's all broken so skip it.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-17-alex.bennee@linaro.org>
2022-02-28 16:42:35 +00:00
Alex Bennée
f8a4c6d728 tests/tcg: add vectorised sha512 versions
This builds vectorised versions of sha512 to exercise the vector code:

  - aarch64 (AdvSimd)
  - i386 (SSE)
  - s390x (MVX)
  - ppc64/ppc64le (power10 vectors)

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-14-alex.bennee@linaro.org>
2022-02-28 16:42:35 +00:00
Alex Bennée
d426f4fc6f tests/tcg: add sha512 test
This imports the sha512 algorithm and related tests from ccan which
offers a cleaner hash implementation with its own validation tests
with which we can exercise TCG code generations.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-13-alex.bennee@linaro.org>
2022-02-28 16:42:30 +00:00
Alex Bennée
c96e593a7e tests/tcg: build sha1-vector with O3 and compare
The aim of this is to test code generation for vectorised operations.
Unfortunately gcc struggles to do much with the messy sha1 code (try
-fopt-info-vec-missed to see why). However it's better than nothing.

We assume the non-vectorised output is gold and baring compiler bugs
the outputs should match.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-12-alex.bennee@linaro.org>
2022-02-28 16:42:25 +00:00
Alex Bennée
93f44896c9 tests/tcg/ppc64: clean-up handling of byte-reverse
Rather than having an else leg for the missing compiler case we can
simply just not add the test - the same way as is done for ppc64le.
Also while we are at it fix up the compiler invocation.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-11-alex.bennee@linaro.org>
2022-02-28 16:42:25 +00:00
Alex Bennée
7d5817a426 tests/docker: introduce debian-riscv64-test-cross
Cross building QEMU for riscv64 still involves messing about with sid
and ports. However for building tests we can have a slimmer compiler
only container which should be more stable.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-7-alex.bennee@linaro.org>
2022-02-28 16:42:02 +00:00
Alex Bennée
89767579ca tests/docker: update debian-s390x-cross with lcitool
A later compiler is needed for some upcomming tests so we might as
well migrate to an lcitool generated docker file.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-6-alex.bennee@linaro.org>
2022-02-28 16:42:02 +00:00
Alex Bennée
e3000245a0 tests/docker: update debian-arm64-cross with lcitool
Using lcitool update debian-arm64-cross to a Debian 11 based system.
As a result we can drop debian-arm64-test-cross just for building
tests.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-5-alex.bennee@linaro.org>
2022-02-28 16:42:02 +00:00
Alex Bennée
072f143073 tests/lcitool: update to latest version
We will need an update shortly for some new images.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220225172021.3493923-4-alex.bennee@linaro.org>
2022-02-28 16:41:57 +00:00
Alex Bennée
5dbefb87aa tests/docker: add NOUSER for alpine image
The alpine image doesn't have a standard useradd binary so disable
this convenience feature for it.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-3-alex.bennee@linaro.org>
2022-02-28 16:41:53 +00:00
Alex Bennée
be20302ae8 tests/docker: restore TESTS/IMAGES filtering
This was broken in the re-factor:

  e86c9a64f4 ("tests/docker/Makefile.include: add a generic docker-run target")

Rather than unwind the changes just apply the filters to the total set
of available images and tests. That way we don't inadvertently build
images only not to use them later.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-2-alex.bennee@linaro.org>
2022-02-28 16:41:44 +00:00
David Miller
e2c3fb0699 tests/tcg/s390x: Tests for Miscellaneous-Instruction-Extensions Facility 3
tests/tcg/s390x/mie3-compl.c: [N]*K instructions
tests/tcg/s390x/mie3-mvcrl.c: MVCRL instruction
tests/tcg/s390x/mie3-sel.c: SELECT instruction

Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220223223117.66660-4-dmiller423@gmail.com>
[thuth: Squash mnemonic -> .insn patch, white space cleanup, improve asm usage]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-28 11:29:15 +01:00
Thomas Huth
f3f230d934 tests/avocado/machine_s390_ccw_virtio: Adapt test to new default resolution
QEMU's default screen resolution recently changed to 1280x800, so the
resolution in the screen shot header changed of course, too.

Fixes: de72c4b7cd ("edid: set default resolution to 1280x800 (WXGA)")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220221101933.307525-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-25 13:31:37 +01:00
Peter Maydell
4aa2e497a9 This misc series of changes:
- Improves documentation of SSH fingerprint checking
  - Fixes SHA256 fingerprints with non-blockdev usage
  - Blocks the clone3, setns, unshare & execveat syscalls
    with seccomp
  - Blocks process spawning via clone syscall, but allows
    threads, with seccomp
  - Takes over seccomp maintainer role
  - Expands firmware descriptor spec to allow flash
    without NVRAM
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmIOOBkACgkQvobrtBUQ
 T9/ruhAAr8jkAH8FN5ftx2/L7q8SHpjPupue1CJ0Nl/ykmYhTGc+SqC3R2nZWOk2
 Ws8hHVcDVT1lhrGxPtU7o+JPC1TebJTsloimJoKQY3qfdvZadJeR/4KsOUzi2ruu
 VZ6HiYvZc1c9T+NPf3QRhBo7yyascKWKWHDseUNIt/2DiefCox4QFUDDMG86HiQF
 KK30xWTvwJdcPxRlbfZbWRoqA0v4OoSDK6Ftp94FQSNBkExO85kstDq3xVaApf8H
 DE1QD7gf+dvz11wVuFhrf4d1EH032nU0p0kMxhABc4/kZXo5iWXohhzML3/MUEVT
 pe5/9pzUdWpfXQd/2r7x2PyPgySAG7lGbkgltowY52qnRPaNw9ukwkFCFAj8wiD8
 FT2ghvkYD3zLfnZ3nuuzJVjf3pXgCc5VcfXaoffT72a7gpI1LTuEqPFwo04imV4l
 21fYFx26mYTGCLH1CwVw8MQ2z/dg6uorT/NHdmRA/KrYJ1Elay2K7DV3Z5jOM5MI
 0Ll5HkfsUut+1rioUjNgmlQ+96k/G0P0hVUoTUIcgl3U/GDx2+ypcrNTfmEcaCLV
 bOhsjtrcg/KAXsCSbvnfDe3bWf0txnscyqoilEzDahLvciWG3d6qlhczLy29LGb4
 /w7iqnUcSygXc+a9/ckVo1h5fo0i9qb3W8Pw9klapvz6SGJ83g4=
 =PeCY
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-next-pull-request' into staging

This misc series of changes:

 - Improves documentation of SSH fingerprint checking
 - Fixes SHA256 fingerprints with non-blockdev usage
 - Blocks the clone3, setns, unshare & execveat syscalls
   with seccomp
 - Blocks process spawning via clone syscall, but allows
   threads, with seccomp
 - Takes over seccomp maintainer role
 - Expands firmware descriptor spec to allow flash
   without NVRAM

# gpg: Signature made Thu 17 Feb 2022 11:57:13 GMT
# gpg:                using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange-gitlab/tags/misc-next-pull-request:
  docs: expand firmware descriptor to allow flash without NVRAM
  MAINTAINERS: take over seccomp from Eduardo Otubo
  seccomp: block setns, unshare and execveat syscalls
  seccomp: block use of clone3 syscall
  seccomp: fix blocking of process spawning
  seccomp: add unit test for seccomp filtering
  seccomp: allow action to be customized per syscall
  block: print the server key type and fingerprint on failure
  block: support sha256 fingerprint with pre-blockdev options
  block: better document SSH host key fingerprint checking

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-23 09:25:05 +00:00
Peter Maydell
5abccc7922 * Improve virtio-net failover test
* Some small fixes for the qtests
 * Misc header cleanups by Philippe
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmITejURHHRodXRoQHJl
 ZGhhdC5jb20ACgkQLtnXdP5wLbUFaBAAsj/mMIHbP0pIetfbimxopqg85HhryO8R
 P3a2k3+clN0dhIMaZKfnXKM2S03/xWDtXYATidiRpliRfaeZ8oPM9j3U1kqbsjQ9
 u+IdVgYdy0ZoLINvSdLZQp+5ZdBL34KP7OYBdkJUyFV8n2CwFk9c/8tjazkqA3Il
 8OwkrdMu+7E5KyhjeDByPAOyONN53vOZT4nXdD2EsQ7AbIzKfw41Bo2wJzJCOqB+
 uX9JHv+mpKhhv5NZle/oaUF5lg+rqveg4LxSe8D9FIGfYiFMYG3HNq38St4NVXVc
 knBqzQiQZm2MLviXQQ4ym9Q3BFd1QZLJH3TB9SfvJjGEvrErb0Xylcqra1EIxseG
 xI34f9ER0usWSUcIe4t/WjzAjEr3ez+uDJ6ItNFRqPwsV4PGaSgP4auhNzMGlkTo
 zr1O5o/hJdh3otDzM6Qu8FtnNUsKLb2KerveQW+a0uJj3BDKshbn7Au7d3+6eORJ
 DuugBwzrtgvAKr1z/6pYFT8eXyhvI7w/rwtUJwNiBsHXvTBQ4UxEXlKpUCKqEQls
 oqlTK3bezKJuURnuND88L410qUAuvTABjoYx9Y9abbrSqq91F/52bpB/jY2Lke+y
 YoWPV13npdguG1eHB8DowF7MQRLVcULTshXLuM0A9NXkSLJfNY2gLb/I9+hXuQr0
 PuLO5BfVyLE=
 =/azS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging

* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe

# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
  hw/tricore: Remove unused and incorrect header
  hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
  exec/exec-all: Move 'qemu/log.h' include in units requiring it
  softmmu/runstate: Clean headers
  linux-user: Add missing "qemu/timer.h" include
  target: Add missing "qemu/timer.h" include
  core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
  exec/ramblock: Add missing includes
  qtest: Add missing 'hw/qdev-core.h' include
  hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
  hw/remote: Add missing include
  hw/tpm: Clean includes
  scripts: Remove the old switch-timer-api script
  tests/qtest: failover: migration abort test with failover off
  tests/qtest: failover: test migration if the guest doesn't support failover
  tests/qtest: failover: check migration with failover off
  tests/qtest: failover: check missing guest feature
  tests/qtest: failover: check the feature is correctly provided
  tests/qtest: failover: use a macro for check_one_card()
  tests/qtest: failover: clean up pathname of tests
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-22 13:07:32 +00:00
Peter Maydell
922268067f * More Meson conversions (0.59.x now required rather than suggested)
* UMIP support for TCG x86
 * Fix migration crash
 * Restore error output for check-block
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmITXP8UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroOsdQf/Srx+8BImb+LtRpiKHhn4SiucGSe8
 EhEAPSnblbvIGK9BYfj953svDzlLN2JIADcmOI59QE2xsPEtxLlEmMlvg/JIUMQp
 jk07oxbVXdv4olTyECmO3hj2VbSG7VR3tP9TOuJA5Vi4a+VzYXc6zv1/mp/8rdnl
 pGW0pjBZTXSp2Z/Be9/aGN8IuW+GnQuVZDXWBuEJmz2UzcdPWaOUVDro7IaUXmqp
 eB4XcT0jPR5uKetA1R1cyHCUVd7P0v6UV8SLYj905H1a8sqxDWMiUzX6fKkoN0SJ
 r/y7kCuyNzpxoWRuA2KN6Q5f9kAlMI/j9H3ih0wUfEkauiPtTATAc1+s+Q==
 =sSBY
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More Meson conversions (0.59.x now required rather than suggested)
* UMIP support for TCG x86
* Fix migration crash
* Restore error output for check-block

# gpg: Signature made Mon 21 Feb 2022 09:35:59 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
  configure, meson: move CONFIG_IASL to a Meson option
  meson, configure: move ntddscsi API check to meson
  meson: require dynamic linking for VSS support
  qga/vss-win32: require widl/midl, remove pre-built TLB file
  meson: do not make qga/vss-win32/meson.build conditional on C++ presence
  configure, meson: replace VSS SDK checks and options with --enable-vss-sdk
  qga/vss: use standard windows headers location
  qga/vss-win32: use widl if available
  meson: drop --with-win-sdk
  qga/vss-win32: fix midl arguments
  meson: refine check for whether to look for virglrenderer
  configure, meson: move guest-agent, tools to meson
  configure, meson: move smbd options to meson_options.txt
  configure, meson: move coroutine options to meson_options.txt
  configure, meson: move some default-disabled options to meson_options.txt
  meson: define qemu_cflags/qemu_ldflags
  configure, meson: move block layer options to meson_options.txt
  configure, meson: move image format options to meson_options.txt
  configure, meson: cleanup qemu-ga libraries
  configure, meson: move TPM check to meson
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-21 17:24:05 +00:00
Paolo Bonzini
20cf5cb487 configure, meson: move guest-agent, tools to meson
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-21 10:35:53 +01:00
Paolo Bonzini
c55cf6ab03 configure, meson: move some default-disabled options to meson_options.txt
These do not depend on --with-default-features, so they become
booleans in meson too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-21 10:35:53 +01:00
Paolo Bonzini
406523f6b3 configure, meson: move block layer options to meson_options.txt
Unlike image formats, these also require an entry in config-host.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-21 10:35:53 +01:00
Laurent Vivier
e20977b797 tests/qtest: failover: migration abort test with failover off
Test abort during active migration when failover is disabled from QEMU
or from guest side.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-8-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:15:55 +01:00
Laurent Vivier
d9872c00f7 tests/qtest: failover: test migration if the guest doesn't support failover
The primary device is not plugged and the migration is done only with
the standby device

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-7-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:15:55 +01:00
Laurent Vivier
7f998491ae tests/qtest: failover: check migration with failover off
If failover is off, the primary device is not plugged and
the migration is done only with the standby device.

On destination, the primary device must not be plugged.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-6-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:15:55 +01:00
Laurent Vivier
78475083f7 tests/qtest: failover: check missing guest feature
If QEMU provides the VIRTIO_NET_F_STANDBY feature but the guest doesn't
the primary device must be kept hidden

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-5-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:15:55 +01:00
Laurent Vivier
93262464d2 tests/qtest: failover: check the feature is correctly provided
Check QEMU provides the VIRTIO_NET_F_STANDBY if failover is on,
and doesn't if failover is off

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-4-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:15:55 +01:00
Laurent Vivier
1a800870c5 tests/qtest: failover: use a macro for check_one_card()
This allows g_assert() to correctly report the line number of the error
in the test case.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-3-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:15:55 +01:00
Laurent Vivier
fbd2913cce tests/qtest: failover: clean up pathname of tests
clearly indentify parameters, hotplug and migration tests

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-2-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:15:55 +01:00
Thomas Huth
546f292d63 tests/qtest/ide-test: Remove bad retry_isa test
The retry_isa test is not doing what it was intended for: The
test_retry_flush() function ignores the machine parameter completely
and thus this test does not get run with the "isapc" machine.
Moreover, in the course of time, the test_retry_flush() has been
changed to depend on PCI-related functions, so this also cannot
be fixed by simply using the machine parameter now. The correct
fix would be to switch the whole test to libqos, but until someone
has time to do this, let's simply drop the retry_isa test for now.

Message-Id: <20220121120635.220644-1-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:13:23 +01:00
Eric Auger
d24d1ad3c4 tests/qtest/vhost-user-test.c: Use vhostforce=on
-netdev vhost-user,vhostforce is deprecated and vhostforce=on
should be used instead.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220210145254.157790-2-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:13:23 +01:00
Michael S. Tsirkin
c4407f19bd erst: drop cast to long long
The way to print uint64_t is with PRIx64, not with
a cast to long long.

Message-Id: <20220206093547.1282513-1-mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:13:23 +01:00
Dr. David Alan Gilbert
7b172333f1 tests/x86: Use 'pc' machine type for hotplug tests
Hotplug tests need a bridge setting up on q35, for now
keep them on 'pc'.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220215162537.605030-3-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:13:23 +01:00
Dr. David Alan Gilbert
fedcc3793e tests/x86: Use 'pc' machine type for old hardware tests
For tests that rely on old hardware, e.g. floppies or IDE drives,
explicitly select the 'pc' machine type.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220215162537.605030-2-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21 10:13:23 +01:00
Greg Kurz
494fbbd3ed tests/9pfs: Use g_autofree and g_autoptr where possible
It is recommended to use g_autofree or g_autoptr as it reduces
the odds of introducing memory leaks in future changes.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220201151508.190035-3-groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2022-02-17 16:57:58 +01:00
Greg Kurz
ba6112e40c tests/9pfs: Fix leak of local_test_path
local_test_path is allocated in virtio_9p_create_local_test_dir() to hold the path
of the temporary directory. It should be freed in virtio_9p_remove_local_test_dir()
when the temporary directory is removed. Clarify the lifecycle of local_test_path
while here.

Based-on: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220201151508.190035-2-groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2022-02-17 16:57:58 +01:00
Christian Schoenebeck
68c66a96c8 tests/9pfs: fix mkdir() being called twice
The 9p test cases use mkdtemp() to create a temporary directory for
running the 'local' 9p tests with real files/dirs. Unlike mktemp()
which only generates a unique file name, mkdtemp() also creates the
directory, therefore the subsequent mkdir() was wrong and caused
errors on some systems.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Fixes: 136b7af2 (tests/9pfs: fix test dir for parallel tests)
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/832
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Greg Kurz <Greg Kurz <groug@kaod.org>
Message-Id: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
2022-02-17 16:57:58 +01:00
Christian Schoenebeck
65ceee0ae5 tests/9pfs: use g_autofree where possible
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1mn1fA-0005qZ-TM@lizzy.crudebyte.com>
2022-02-17 16:57:57 +01:00
Daniel P. Berrangé
5a2f693f07 seccomp: fix blocking of process spawning
When '-sandbox on,spawn=deny' is given, we are supposed to block the
ability to spawn processes. We naively blocked the 'fork' syscall,
forgetting that any modern libc will use the 'clone' syscall instead.

We can't simply block the 'clone' syscall though, as that will break
thread creation. We thus list the set of flags used to create threads
and block anything that doesn't match this exactly.

Acked-by: Eduardo Otubo <otubo@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-02-16 18:52:40 +00:00
Daniel P. Berrangé
d2ea8dac70 seccomp: add unit test for seccomp filtering
The handling of some syscalls / libc function is quite subtle. For
example, 'fork' at a libc level doesn't always correspond to 'fork'
at a syscall level, since the 'clone' syscall is preferred usually.

The unit test will help to detect these kind of problems. A point of
difficulty in writing a test though is that the QEMU build process may
already be confined by seccomp. For example, if running inside a
container. Since we can't predict what filtering might have been applied
already, we are quite conservative and skip all tests if we see any kind
of seccomp filter active.

Acked-by: Eduardo Otubo <otubo@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-02-16 18:52:40 +00:00
Paolo Bonzini
43a363ae35 meson: use .allowed() method for features
The method is now in 0.59, using it simplifies some boolean conditions.
The other new methods .require() and .disable_auto_if() can be used too,
but introducing them is not just a matter of search-and-replace.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-16 15:01:33 +01:00
Thomas Huth
308c8475bc tests/qemu-iotests/testrunner: Print diff to stderr in TAP mode
When running in TAP mode, stdout is reserved for the TAP protocol.
To see the "diff" of the failed test, we have to print it to
stderr instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220209101530.3442837-8-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-16 15:01:33 +01:00
Peter Maydell
2d88a3a595 Block layer patches
- Fix crash in blockdev-reopen with iothreads
 - fdc-isa: Respect QOM properties when building AML
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmIGoJQRHGt3b2xmQHJl
 ZGhhdC5jb20ACgkQfwmycsiPL9YOzBAAig2bCFiJJds0EpbWPGN/bNGpeAWMSUAi
 lcbp2U+yS/VWEaa/LyD8VfWd8t7gcIXc12bDxHi+/AGgZsR5AQTQclT/kj+Ncmxn
 E2rGTQdXvIZEkfXWYmwbM/Lm2+iK2g0Xw4WfmVj1peT4Mm1hmcle8odnzXywp/dL
 3LLIKVUh7ol/khvQfqR6dbJPhVlbPaKyEmlmdfBjLNYX0FSwRqspKY6GJEj0fZal
 o8wCUA27O8u+ASF3bpk/bFcBcsKAREPi2IXkm+TRFGb+lzolnsO4p7JmOAyE0xaW
 JoMHHU20hGHWMLvvTdOELVNVLp6iz54ZlarUTZFn5pjTbXrT9ELh5d6dfIKQYaGc
 tFpfX+n8dFzqVxAD0/lisAGPxzZYwrHVyVeypJaAMeogPL9+zNKiPdkDEY+1thn8
 Qr3X57qz+saoqH1pGr2Y/x7ZUzA2TKYz0fnN2bHENaAzwNuNJkTKd1+gJ501/ILM
 3v+H2KJKHaKhyxYubRHmCdBod8bOdYCYgZoptEhydhMFQW99dnA6m51h6spWiP1c
 SR+faJxqulnfKu9lTW80+q0akzDArmk8roxNw0Hg0svZfJefKXJKG4oCXy5YU/Fe
 UTAnXx8oWnQpPtnlvCKlMLTKzt6oHGlrE2BED2QPlIk0Mca/9/BwEyu2Yx7AC4Uj
 TkhxAjDdPDg=
 =/1qA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kwolf-gitlab/tags/for-upstream' into staging

Block layer patches

- Fix crash in blockdev-reopen with iothreads
- fdc-isa: Respect QOM properties when building AML

# gpg: Signature made Fri 11 Feb 2022 17:44:52 GMT
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kwolf-gitlab/tags/for-upstream:
  hw/block/fdc-isa: Respect QOM properties when building AML
  iotests: Test blockdev-reopen with iothreads and throttling
  block: Lock AioContext for drain_end in blockdev-reopen

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-14 19:54:00 +00:00
Peter Maydell
50a75ff680 Fix safe_syscall_base for sparc64.
Fix host signal handling for sparc64-linux.
 Speedups for jump cache and work list probing.
 Fix for exception replays.
 Raise guest SIGBUS for user-only misaligned accesses.
 -----BEGIN PGP SIGNATURE-----
 
 iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmIFu3QdHHJpY2hhcmQu
 aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9tHwf+KFk9Pa9M+vhnHTZJ
 ZvIRs9BaSzoDYqxLlHSKmXN3w3G5PbIcbHVHXTty2o28bT0jk05T9zQn3TzMfcbl
 O+Yx8rygUJmbzlEQ+GaSI69pppFj8ahlS/ylfwd5MABZun2mawexEU9sqXqGCKR9
 kJY8IpkZ6vqEDONcS1ZMQ+HFsNvw6LYBd567SY8g9ZsyPLWtQSqwdcuPqAJDFWCv
 zNe6b07IRoFVOsbtQix9Dl/ntMxk5jto+UvdEVuW2FJOeRZJRshLWF5cGHNavSgQ
 Culb5ALOzoxSlcZ4xfVfWtBGoFr/BNu9D0omTSmbosvXAd4HmPVxD6kV17wXV3+g
 G/cvew==
 =D+x7
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20220211' into staging

Fix safe_syscall_base for sparc64.
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.

# gpg: Signature made Fri 11 Feb 2022 01:27:16 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20220211: (34 commits)
  tests/tcg/multiarch: Add sigbus.c
  tcg/sparc: Support unaligned access for user-only
  tcg/sparc: Add tcg_out_jmpl_const for better tail calls
  tcg/sparc: Use the constant pool for 64-bit constants
  tcg/sparc: Convert patch_reloc to return bool
  tcg/sparc: Improve code gen for shifted 32-bit constants
  tcg/sparc: Add scratch argument to tcg_out_movi_int
  tcg/sparc: Split out tcg_out_movi_imm32
  tcg/sparc: Use tcg_out_movi_imm13 in tcg_out_addsub2_i64
  tcg/mips: Support unaligned access for softmmu
  tcg/mips: Support unaligned access for user-only
  tcg/arm: Support raising sigbus for user-only
  tcg/arm: Reserve a register for guest_base
  tcg/arm: Support unaligned access for softmmu
  tcg/arm: Check alignment for ldrd and strd
  tcg/arm: Remove use_armv6_instructions
  tcg/arm: Remove use_armv5t_instructions
  tcg/arm: Drop support for armv4 and armv5 hosts
  tcg/loongarch64: Support raising sigbus for user-only
  tcg/tci: Support raising sigbus for user-only
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-14 15:24:26 +00:00
Peter Maydell
48033ad678 nbd: handle AioContext change correctly
v2: add my s-o-b marks to each commit
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEi5wmzbL9FHyIDoahVh8kwfGfefsFAmIGYU8ACgkQVh8kwfGf
 efslpQ/+OAEgA8z2frIOzoa5PKmyWDaE4xOAsr595EzhSnDeLi1QVIqSSXFap/m6
 1rzqglD+5udM9LT9FZBHeMDbWr1UqvODZTAah6/T8E6vVzXm9Jn+CivEj4kT4Dd2
 2Mrg3ydjkZsVivs1el4eG7QZ88TvSZkoNAIlT9lVYuT/TaRBKohrms1B4h25wqn9
 u78tnbdAdEGtlHUFy9qyOXPt0eGRt6a1CTo+u0wwJLxKjLpq8cht0DPA4/CQhZay
 Jm7cudJAJyTFxT7EUxpfROj4KuSMsUDmF/pNE8qwQuSnZC9G9u67ImhWpMFmwEZl
 yCAJbOTudWYefgZ3+BtKMH5SBVLA6AsQ60luWkXkqK1dUB4cWxt5lG/UAm1OMJsn
 FL6w3WJFkRTIC1OtHqqJnBtDFHWhTxNX9jjcAdb6lpjz4/wKywUVs+l5aSbxswog
 DMrE1XT+JIab1IqAnSGw0QTY0H9COiQyOlsJ8EjtFFsqwLACSX4qBowesGfoA7IF
 N0ZorAs6QuYYzEaSbRG1vB1lAusSCF5s/UnTg1mDLFWSqJOsqZN7jxXyQbbiFhsN
 f+OTlyIwv4t32eGLRrKHF0vaWUoKQ3skB8m9UFMdQbGBO/LakZL9L42ITxarzUMI
 CVeGLAzs3KvbZUlUyJWl97F2KkdrornmM/9CB57sjw13K94oNYo=
 =+lgn
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vsementsov/tags/pull-nbd-2022-02-09-v2' into staging

nbd: handle AioContext change correctly

v2: add my s-o-b marks to each commit

# gpg: Signature made Fri 11 Feb 2022 13:14:55 GMT
# gpg:                using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E  86A1 561F 24C1 F19F 79FB

* remotes/vsementsov/tags/pull-nbd-2022-02-09-v2:
  iotests/281: Let NBD connection yield in iothread
  block/nbd: Move s->ioc on AioContext change
  iotests/281: Test lingering timers
  iotests.py: Add QemuStorageDaemon class
  block/nbd: Assert there are no timers when closed
  block/nbd: Delete open timer when done
  block/nbd: Delete reconnect delay timer when done

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-12 22:04:07 +00:00
Hanna Reitz
8cfbe929e8 iotests/281: Let NBD connection yield in iothread
Put an NBD block device into an I/O thread, and then read data from it,
hoping that the NBD connection will yield during that read.  When it
does, the coroutine must be reentered in the block device's I/O thread,
which will only happen if the NBD block driver attaches the connection's
QIOChannel to the new AioContext.  It did not do that after 4ddb5d2fde
("block/nbd: drop connection_co") and prior to "block/nbd: Move s->ioc
on AioContext change", which would cause an assertion failure.

To improve our chances of yielding, the NBD server is throttled to
reading 64 kB/s, and the NBD client reads 128 kB, so it should yield at
some point.

Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2022-02-11 14:06:18 +01:00
Hanna Reitz
eaf1e85d4d iotests/281: Test lingering timers
Prior to "block/nbd: Delete reconnect delay timer when done" and
"block/nbd: Delete open timer when done", both of those timers would
remain scheduled even after successfully (re-)connecting to the server,
and they would not even be deleted when the BDS is deleted.

This test constructs exactly this situation:
(1) Configure an @open-timeout, so the open timer is armed, and
(2) Configure a @reconnect-delay and trigger a reconnect situation
    (which succeeds immediately), so the reconnect delay timer is armed.
Then we immediately delete the BDS, and sleep for longer than the
@open-timeout and @reconnect-delay.  Prior to said patches, this caused
one (or both) of the timer CBs to access already-freed data.

Accessing freed data may or may not crash, so this test can produce
false successes, but I do not know how to show the problem in a better
or more reliable way.  If you run this test on "block/nbd: Assert there
are no timers when closed" and without the fix patches mentioned above,
you should reliably see an assertion failure.
(But all other tests that use the reconnect delay timer (264 and 277)
will fail in that configuration, too; as will nbd-reconnect-on-open,
which uses the open timer.)

Remove this test from the quick group because of the two second sleep
this patch introduces.

(I decided to put this test case into 281, because the main bug this
series addresses is in the interaction of the NBD block driver and I/O
threads, which is precisely the scope of 281.  The test case for that
other bug will also be put into the test class added here.

Also, excuse the test class's name, I couldn't come up with anything
better.  The "yield" part will make sense two patches from now.)

Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2022-02-11 14:06:08 +01:00
Hanna Reitz
091dc7b2b5 iotests.py: Add QemuStorageDaemon class
This is a rather simple class that allows creating a QSD instance
running in the background and stopping it when no longer needed.

The __del__ handler is a safety net for when something goes so wrong in
a test that e.g. the tearDown() method is not called (e.g. setUp()
launches the QSD, but then launching a VM fails).  We do not want the
QSD to continue running after the test has failed, so __del__() will
take care to kill it.

Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2022-02-11 14:06:05 +01:00
Kevin Wolf
ee81060237 iotests: Test blockdev-reopen with iothreads and throttling
The 'throttle' block driver implements .bdrv_co_drain_end, so
blockdev-reopen will have to wait for it to complete in the polling
loop at the end of qmp_blockdev_reopen(). This makes AIO_WAIT_WHILE()
release the AioContext lock, which causes a crash if the lock hasn't
correctly been taken.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220203140534.36522-3-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-02-11 09:44:16 +01:00
Thomas Huth
74154d7e4a linux-user: Remove the deprecated ppc64abi32 target
It's likely broken, and nobody cared for picking it up again
during the deprecation phase, so let's remove this now.

Since this is the last entry in deprecated_targets_list, remove
the related code in the configure script, too.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215084958.185214-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220112112722.3641051-32-alex.bennee@linaro.org>
2022-02-09 13:29:38 +00:00
Alex Bennée
f6d1cd4d48 tests/plugins: add instruction matching to libinsn.so
This adds simple instruction matching to the libinsn.so plugin which
is useful for examining the execution distance between instructions.
For example to track how often we flush in ARM due to TLB updates:

  -plugin ./tests/plugin/libinsn.so,match=tlbi

which leads to output like this:

  0xffffffc01019a918, 'tlbi vale1is, x1', 5702 hits, 31825 match hits, Δ+8112 since last match, 68859 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5703 hits, 56593 match hits, Δ+17712125 since last match, 33455 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5704 hits, 56594 match hits, Δ+12689 since last match, 33454 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5705 hits, 56595 match hits, Δ+12585 since last match, 33454 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5706 hits, 56596 match hits, Δ+10491 since last match, 33454 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5707 hits, 56597 match hits, Δ+4721 since last match, 33453 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5708 hits, 56598 match hits, Δ+10733 since last match, 33453 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5709 hits, 56599 match hits, Δ+61959 since last match, 33453 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5710 hits, 56600 match hits, Δ+55235 since last match, 33454 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5711 hits, 56601 match hits, Δ+54373 since last match, 33454 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5712 hits, 56602 match hits, Δ+2705 since last match, 33453 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5713 hits, 56603 match hits, Δ+17262 since last match, 33453 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5714 hits, 56604 match hits, Δ+17206 since last match, 33453 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5715 hits, 56605 match hits, Δ+28940 since last match, 33453 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5716 hits, 56606 match hits, Δ+7370 since last match, 33452 avg insns/match
  0xffffffc01019a918, 'tlbi vale1is, x1', 5717 hits, 56607 match hits, Δ+7066 since last match, 33452 avg insns/match

showing we do some sort of TLBI invalidation every 33 thousand
instructions.

Cc: Vasilev Oleg <vasilev.oleg@huawei.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Emilio Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-25-alex.bennee@linaro.org>
2022-02-09 12:08:42 +00:00
Alex Bennée
39be9dd30f tests/plugin: allow libinsn.so per-CPU counts
We won't go fully flexible but for most system emulation 8 vCPUs
resolution should be enough for anybody ;-)

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-24-alex.bennee@linaro.org>
2022-02-09 12:08:42 +00:00
Alex Bennée
3bdc19af00 tests/tcg/sh4: disable another unreliable test
Given the other failures it looks like general thread handling on sh4
is sketchy. It fails more often on CI than on my developer machine
though. See https://gitlab.com/qemu-project/qemu/-/issues/856 for more
details.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Laurent Vivier <laurent@vivier.eu>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-17-alex.bennee@linaro.org>
2022-02-09 12:08:42 +00:00
Thomas Huth
8b11f4c37a tests: Update CentOS 8 container to CentOS Stream 8
Support for CentOS 8 has stopped at the end of 2021, so let's
switch to the Stream variant instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220201101911.97900-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-16-alex.bennee@linaro.org>
2022-02-09 12:08:42 +00:00
Thomas Huth
ab4f987c4c tests/lcitool: Allow lcitool-refresh in out-of-tree builds, too
When running "make lcitool-refresh" in an out-of-tree build, it
currently fails with an error message from git like this:

 fatal: not a git repository (or any parent up to mount point /)
 Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).

Fix it by changing to the source directory first before updating
the submodule.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220201085554.85733-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-15-alex.bennee@linaro.org>
2022-02-09 12:08:42 +00:00
Philippe Mathieu-Daudé
4491c46879 tests/lcitool: Install libibumad to cover RDMA on Debian based distros
On Debian we also need libibumad to enable RDMA:

  $ ../configure --enable-rdma

  ERROR:  OpenFabrics librdmacm/libibverbs/libibumad not present.
          Your options:
           (1) Fast: Install infiniband packages (devel) from your distro.
           (2) Cleanest: Install libraries from www.openfabrics.org
           (3) Also: Install softiwarp if you don't have RDMA hardware

Add the dependency to lcitool's qemu.yml (where librdmacm and
libibverbs are already listed) and refresh the generated files
by running:

      $ make lcitool-refresh

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-8-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-12-alex.bennee@linaro.org>
2022-02-09 12:08:42 +00:00
Philippe Mathieu-Daudé
dabee8381a tests/lcitool: Refresh submodule and remove libxml2
The previous commit removed all uses of libxml2.

Refresh lcitool submodule, update qemu.yml and refresh the generated
files by running:

  $ make lcitool-refresh

Note: This refreshment also removes libudev dependency on Fedora
and CentOS due to libvirt-ci commit 18bfaee ("mappings: Improve
mapping for libudev"), since "The udev project has been absorbed
by the systemd project", and lttng-ust on FreeBSD runners due to
libvirt-ci commit 6dd9b6f ("guests: drop lttng-ust from FreeBSD
platform").

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-6-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-10-alex.bennee@linaro.org>
2022-02-09 12:08:42 +00:00
Philippe Mathieu-Daudé
5d3539d561 tests/lcitool: Include local qemu.yml when refreshing cirrus-ci files
The script only include the local qemu.yml for Dockerfiles.
Since we want to keep the Cirrus-CI generated files in sync,
also use the --data-dir option in generate_cirrus().

Fixes: c45a540f4b (".gitlab-ci.d/cirrus: auto-generate variables with lcitool")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-4-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-8-alex.bennee@linaro.org>
2022-02-09 12:08:42 +00:00
Alex Bennée
8dcb404bff tests/qtest: enable more vhost-user tests by default
If this starts causing failures again we should probably fix that.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220204204335.1689602-3-alex.bennee@linaro.org>
2022-02-09 12:08:41 +00:00
Alex Bennée
135e6a09a9 tests/Makefile.include: clean-up old code
This is no longer needed since a2ce7dbd91 ("meson: convert tests/qtest
to meson", 2020-08-21)

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-2-alex.bennee@linaro.org>
2022-02-09 12:08:41 +00:00
Richard Henderson
5c1a101ef6 tests/tcg/multiarch: Add sigbus.c
A mostly generic test for unaligned access raising SIGBUS.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-02-09 09:00:01 +11:00
Kevin Townsend
4fd1ebb105 hw/sensor: Add lsm303dlhc magnetometer device
This commit adds emulation of the magnetometer on the LSM303DLHC.
It allows the magnetometer's X, Y and Z outputs to be set via the
mag-x, mag-y and mag-z properties, as well as the 12-bit
temperature output via the temperature property. Sensor can be
enabled with 'CONFIG_LSM303DLHC_MAG=y'.

Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Message-id: 20220130095032.35392-1-kevin.townsend@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-08 10:56:29 +00:00
Peter Maydell
0d564a3e32 virtio,pc: features, cleanups, fixes
Part of ACPI ERST support
 fixes, cleanups
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFCBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmH/lpgPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpntwH+LTJ3MIX5tHL2FWR9vfQoIOQms4A2YJb5GFv
 f/wZMQ4Hx/4k3KsicJF4ONJ04cT4IuxtsY9WtUroNcpuh9qy+cMYw61xsd7oa2DB
 k7vInrVaDP1pKmNzK+R1DV4VsbghAZzCh23hKKS8HGOd+DM6PWSozzCSpbQGerNX
 H61bS7lvESLONhHIJdmo5/d4aGEGlt5xs2KzZe/pwl8OU4/WRYK8MgEKOhvAZT7T
 Ups0IDSAOJ5pqzXCLESKFfImNIzak16+lnY9iOMcIFWQVEphMvjkn9jtCu4wvDRe
 500GC8i9Q8X3B/D5Y9TB78mDuiqfQP69zBRfhSjgQeU9+eWCxA==
 =JIT5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc: features, cleanups, fixes

Part of ACPI ERST support
fixes, cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 06 Feb 2022 09:36:24 GMT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (24 commits)
  util/oslib-posix: Fix missing unlock in the error path of os_mem_prealloc()
  ACPI ERST: step 6 of bios-tables-test.c
  ACPI ERST: bios-tables-test testcase
  ACPI ERST: qtest for ERST
  ACPI ERST: create ACPI ERST table for pc/x86 machines
  ACPI ERST: build the ACPI ERST table
  ACPI ERST: support for ACPI ERST feature
  ACPI ERST: header file for ERST
  ACPI ERST: PCI device_id for ERST
  ACPI ERST: bios-tables-test.c steps 1 and 2
  libvhost-user: Map shared RAM with MAP_NORESERVE to support virtio-mem with hugetlb
  libvhost-user: handle removal of identical regions
  libvhost-user: prevent over-running max RAM slots
  libvhost-user: fix VHOST_USER_REM_MEM_REG not closing the fd
  libvhost-user: Simplify VHOST_USER_REM_MEM_REG
  libvhost-user: Add vu_add_mem_reg input validation
  libvhost-user: Add vu_rem_mem_reg input validation
  tests: acpi: test short OEM_ID/OEM_TABLE_ID values in test_oem_fields()
  tests: acpi: update expected blobs
  acpi: fix OEM ID/OEM Table ID padding
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-06 10:46:46 +00:00
Eric DeVolder
a4752a51f1 ACPI ERST: step 6 of bios-tables-test.c
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 6.

Below is the disassembly of tests/data/acpi/pc/ERST.acpierst.

 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20180508 (64-bit version)
  * Copyright (c) 2000 - 2018 Intel Corporation
  *
  * Disassembly of tests/data/acpi/pc/ERST.acpierst, Thu Dec  2 13:32:07 2021
  *
  * ACPI Data Table [ERST]
  *
  * Format: [HexOffset DecimalOffset ByteLength]  FieldName : FieldValue
  */

 [000h 0000   4]                    Signature : "ERST"    [Error Record Serialization Table]
 [004h 0004   4]                 Table Length : 00000390
 [008h 0008   1]                     Revision : 01
 [009h 0009   1]                     Checksum : D6
 [00Ah 0010   6]                       Oem ID : "BOCHS "
 [010h 0016   8]                 Oem Table ID : "BXPC    "
 [018h 0024   4]                 Oem Revision : 00000001
 [01Ch 0028   4]              Asl Compiler ID : "BXPC"
 [020h 0032   4]        Asl Compiler Revision : 00000001

 [024h 0036   4]  Serialization Header Length : 00000030
 [028h 0040   4]                     Reserved : 00000000
 [02Ch 0044   4]      Instruction Entry Count : 0000001B

 [030h 0048   1]                       Action : 00 [Begin Write Operation]
 [031h 0049   1]                  Instruction : 03 [Write Register Value]
 [032h 0050   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [033h 0051   1]                     Reserved : 00

 [034h 0052  12]              Register Region : [Generic Address Structure]
 [034h 0052   1]                     Space ID : 00 [SystemMemory]
 [035h 0053   1]                    Bit Width : 20
 [036h 0054   1]                   Bit Offset : 00
 [037h 0055   1]         Encoded Access Width : 03 [DWord Access:32]
 [038h 0056   8]                      Address : 00000000FEBF3000

 [040h 0064   8]                        Value : 0000000000000000
 [048h 0072   8]                         Mask : 00000000000000FF

 [050h 0080   1]                       Action : 01 [Begin Read Operation]
 [051h 0081   1]                  Instruction : 03 [Write Register Value]
 [052h 0082   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [053h 0083   1]                     Reserved : 00

 [054h 0084  12]              Register Region : [Generic Address Structure]
 [054h 0084   1]                     Space ID : 00 [SystemMemory]
 [055h 0085   1]                    Bit Width : 20
 [056h 0086   1]                   Bit Offset : 00
 [057h 0087   1]         Encoded Access Width : 03 [DWord Access:32]
 [058h 0088   8]                      Address : 00000000FEBF3000

 [060h 0096   8]                        Value : 0000000000000001
 [068h 0104   8]                         Mask : 00000000000000FF

 [070h 0112   1]                       Action : 02 [Begin Clear Operation]
 [071h 0113   1]                  Instruction : 03 [Write Register Value]
 [072h 0114   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [073h 0115   1]                     Reserved : 00

 [074h 0116  12]              Register Region : [Generic Address Structure]
 [074h 0116   1]                     Space ID : 00 [SystemMemory]
 [075h 0117   1]                    Bit Width : 20
 [076h 0118   1]                   Bit Offset : 00
 [077h 0119   1]         Encoded Access Width : 03 [DWord Access:32]
 [078h 0120   8]                      Address : 00000000FEBF3000

 [080h 0128   8]                        Value : 0000000000000002
 [088h 0136   8]                         Mask : 00000000000000FF

 [090h 0144   1]                       Action : 03 [End Operation]
 [091h 0145   1]                  Instruction : 03 [Write Register Value]
 [092h 0146   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [093h 0147   1]                     Reserved : 00

 [094h 0148  12]              Register Region : [Generic Address Structure]
 [094h 0148   1]                     Space ID : 00 [SystemMemory]
 [095h 0149   1]                    Bit Width : 20
 [096h 0150   1]                   Bit Offset : 00
 [097h 0151   1]         Encoded Access Width : 03 [DWord Access:32]
 [098h 0152   8]                      Address : 00000000FEBF3000

 [0A0h 0160   8]                        Value : 0000000000000003
 [0A8h 0168   8]                         Mask : 00000000000000FF

 [0B0h 0176   1]                       Action : 04 [Set Record Offset]
 [0B1h 0177   1]                  Instruction : 02 [Write Register]
 [0B2h 0178   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [0B3h 0179   1]                     Reserved : 00

 [0B4h 0180  12]              Register Region : [Generic Address Structure]
 [0B4h 0180   1]                     Space ID : 00 [SystemMemory]
 [0B5h 0181   1]                    Bit Width : 20
 [0B6h 0182   1]                   Bit Offset : 00
 [0B7h 0183   1]         Encoded Access Width : 03 [DWord Access:32]
 [0B8h 0184   8]                      Address : 00000000FEBF3008

 [0C0h 0192   8]                        Value : 0000000000000000
 [0C8h 0200   8]                         Mask : 00000000FFFFFFFF

 [0D0h 0208   1]                       Action : 04 [Set Record Offset]
 [0D1h 0209   1]                  Instruction : 03 [Write Register Value]
 [0D2h 0210   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [0D3h 0211   1]                     Reserved : 00

 [0D4h 0212  12]              Register Region : [Generic Address Structure]
 [0D4h 0212   1]                     Space ID : 00 [SystemMemory]
 [0D5h 0213   1]                    Bit Width : 20
 [0D6h 0214   1]                   Bit Offset : 00
 [0D7h 0215   1]         Encoded Access Width : 03 [DWord Access:32]
 [0D8h 0216   8]                      Address : 00000000FEBF3000

 [0E0h 0224   8]                        Value : 0000000000000004
 [0E8h 0232   8]                         Mask : 00000000000000FF

 [0F0h 0240   1]                       Action : 05 [Execute Operation]
 [0F1h 0241   1]                  Instruction : 03 [Write Register Value]
 [0F2h 0242   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [0F3h 0243   1]                     Reserved : 00

 [0F4h 0244  12]              Register Region : [Generic Address Structure]
 [0F4h 0244   1]                     Space ID : 00 [SystemMemory]
 [0F5h 0245   1]                    Bit Width : 20
 [0F6h 0246   1]                   Bit Offset : 00
 [0F7h 0247   1]         Encoded Access Width : 03 [DWord Access:32]
 [0F8h 0248   8]                      Address : 00000000FEBF3008

 [100h 0256   8]                        Value : 000000000000009C
 [108h 0264   8]                         Mask : 00000000000000FF

 [110h 0272   1]                       Action : 05 [Execute Operation]
 [111h 0273   1]                  Instruction : 03 [Write Register Value]
 [112h 0274   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [113h 0275   1]                     Reserved : 00

 [114h 0276  12]              Register Region : [Generic Address Structure]
 [114h 0276   1]                     Space ID : 00 [SystemMemory]
 [115h 0277   1]                    Bit Width : 20
 [116h 0278   1]                   Bit Offset : 00
 [117h 0279   1]         Encoded Access Width : 03 [DWord Access:32]
 [118h 0280   8]                      Address : 00000000FEBF3000

 [120h 0288   8]                        Value : 0000000000000005
 [128h 0296   8]                         Mask : 00000000000000FF

 [130h 0304   1]                       Action : 06 [Check Busy Status]
 [131h 0305   1]                  Instruction : 03 [Write Register Value]
 [132h 0306   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [133h 0307   1]                     Reserved : 00

 [134h 0308  12]              Register Region : [Generic Address Structure]
 [134h 0308   1]                     Space ID : 00 [SystemMemory]
 [135h 0309   1]                    Bit Width : 20
 [136h 0310   1]                   Bit Offset : 00
 [137h 0311   1]         Encoded Access Width : 03 [DWord Access:32]
 [138h 0312   8]                      Address : 00000000FEBF3000

 [140h 0320   8]                        Value : 0000000000000006
 [148h 0328   8]                         Mask : 00000000000000FF

 [150h 0336   1]                       Action : 06 [Check Busy Status]
 [151h 0337   1]                  Instruction : 01 [Read Register Value]
 [152h 0338   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [153h 0339   1]                     Reserved : 00

 [154h 0340  12]              Register Region : [Generic Address Structure]
 [154h 0340   1]                     Space ID : 00 [SystemMemory]
 [155h 0341   1]                    Bit Width : 20
 [156h 0342   1]                   Bit Offset : 00
 [157h 0343   1]         Encoded Access Width : 03 [DWord Access:32]
 [158h 0344   8]                      Address : 00000000FEBF3008

 [160h 0352   8]                        Value : 0000000000000001
 [168h 0360   8]                         Mask : 00000000000000FF

 [170h 0368   1]                       Action : 07 [Get Command Status]
 [171h 0369   1]                  Instruction : 03 [Write Register Value]
 [172h 0370   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [173h 0371   1]                     Reserved : 00

 [174h 0372  12]              Register Region : [Generic Address Structure]
 [174h 0372   1]                     Space ID : 00 [SystemMemory]
 [175h 0373   1]                    Bit Width : 20
 [176h 0374   1]                   Bit Offset : 00
 [177h 0375   1]         Encoded Access Width : 03 [DWord Access:32]
 [178h 0376   8]                      Address : 00000000FEBF3000

 [180h 0384   8]                        Value : 0000000000000007
 [188h 0392   8]                         Mask : 00000000000000FF

 [190h 0400   1]                       Action : 07 [Get Command Status]
 [191h 0401   1]                  Instruction : 00 [Read Register]
 [192h 0402   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [193h 0403   1]                     Reserved : 00

 [194h 0404  12]              Register Region : [Generic Address Structure]
 [194h 0404   1]                     Space ID : 00 [SystemMemory]
 [195h 0405   1]                    Bit Width : 20
 [196h 0406   1]                   Bit Offset : 00
 [197h 0407   1]         Encoded Access Width : 03 [DWord Access:32]
 [198h 0408   8]                      Address : 00000000FEBF3008

 [1A0h 0416   8]                        Value : 0000000000000000
 [1A8h 0424   8]                         Mask : 00000000000000FF

 [1B0h 0432   1]                       Action : 08 [Get Record Identifier]
 [1B1h 0433   1]                  Instruction : 03 [Write Register Value]
 [1B2h 0434   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [1B3h 0435   1]                     Reserved : 00

 [1B4h 0436  12]              Register Region : [Generic Address Structure]
 [1B4h 0436   1]                     Space ID : 00 [SystemMemory]
 [1B5h 0437   1]                    Bit Width : 20
 [1B6h 0438   1]                   Bit Offset : 00
 [1B7h 0439   1]         Encoded Access Width : 03 [DWord Access:32]
 [1B8h 0440   8]                      Address : 00000000FEBF3000

 [1C0h 0448   8]                        Value : 0000000000000008
 [1C8h 0456   8]                         Mask : 00000000000000FF

 [1D0h 0464   1]                       Action : 08 [Get Record Identifier]
 [1D1h 0465   1]                  Instruction : 00 [Read Register]
 [1D2h 0466   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [1D3h 0467   1]                     Reserved : 00

 [1D4h 0468  12]              Register Region : [Generic Address Structure]
 [1D4h 0468   1]                     Space ID : 00 [SystemMemory]
 [1D5h 0469   1]                    Bit Width : 40
 [1D6h 0470   1]                   Bit Offset : 00
 [1D7h 0471   1]         Encoded Access Width : 04 [QWord Access:64]
 [1D8h 0472   8]                      Address : 00000000FEBF3008

 [1E0h 0480   8]                        Value : 0000000000000000
 [1E8h 0488   8]                         Mask : FFFFFFFFFFFFFFFF

 [1F0h 0496   1]                       Action : 09 [Set Record Identifier]
 [1F1h 0497   1]                  Instruction : 02 [Write Register]
 [1F2h 0498   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [1F3h 0499   1]                     Reserved : 00

 [1F4h 0500  12]              Register Region : [Generic Address Structure]
 [1F4h 0500   1]                     Space ID : 00 [SystemMemory]
 [1F5h 0501   1]                    Bit Width : 40
 [1F6h 0502   1]                   Bit Offset : 00
 [1F7h 0503   1]         Encoded Access Width : 04 [QWord Access:64]
 [1F8h 0504   8]                      Address : 00000000FEBF3008

 [200h 0512   8]                        Value : 0000000000000000
 [208h 0520   8]                         Mask : FFFFFFFFFFFFFFFF

 [210h 0528   1]                       Action : 09 [Set Record Identifier]
 [211h 0529   1]                  Instruction : 03 [Write Register Value]
 [212h 0530   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [213h 0531   1]                     Reserved : 00

 [214h 0532  12]              Register Region : [Generic Address Structure]
 [214h 0532   1]                     Space ID : 00 [SystemMemory]
 [215h 0533   1]                    Bit Width : 20
 [216h 0534   1]                   Bit Offset : 00
 [217h 0535   1]         Encoded Access Width : 03 [DWord Access:32]
 [218h 0536   8]                      Address : 00000000FEBF3000

 [220h 0544   8]                        Value : 0000000000000009
 [228h 0552   8]                         Mask : 00000000000000FF

 [230h 0560   1]                       Action : 0A [Get Record Count]
 [231h 0561   1]                  Instruction : 03 [Write Register Value]
 [232h 0562   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [233h 0563   1]                     Reserved : 00

 [234h 0564  12]              Register Region : [Generic Address Structure]
 [234h 0564   1]                     Space ID : 00 [SystemMemory]
 [235h 0565   1]                    Bit Width : 20
 [236h 0566   1]                   Bit Offset : 00
 [237h 0567   1]         Encoded Access Width : 03 [DWord Access:32]
 [238h 0568   8]                      Address : 00000000FEBF3000

 [240h 0576   8]                        Value : 000000000000000A
 [248h 0584   8]                         Mask : 00000000000000FF

 [250h 0592   1]                       Action : 0A [Get Record Count]
 [251h 0593   1]                  Instruction : 00 [Read Register]
 [252h 0594   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [253h 0595   1]                     Reserved : 00

 [254h 0596  12]              Register Region : [Generic Address Structure]
 [254h 0596   1]                     Space ID : 00 [SystemMemory]
 [255h 0597   1]                    Bit Width : 20
 [256h 0598   1]                   Bit Offset : 00
 [257h 0599   1]         Encoded Access Width : 03 [DWord Access:32]
 [258h 0600   8]                      Address : 00000000FEBF3008

 [260h 0608   8]                        Value : 0000000000000000
 [268h 0616   8]                         Mask : 00000000FFFFFFFF

 [270h 0624   1]                       Action : 0B [Begin Dummy Write]
 [271h 0625   1]                  Instruction : 03 [Write Register Value]
 [272h 0626   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [273h 0627   1]                     Reserved : 00

 [274h 0628  12]              Register Region : [Generic Address Structure]
 [274h 0628   1]                     Space ID : 00 [SystemMemory]
 [275h 0629   1]                    Bit Width : 20
 [276h 0630   1]                   Bit Offset : 00
 [277h 0631   1]         Encoded Access Width : 03 [DWord Access:32]
 [278h 0632   8]                      Address : 00000000FEBF3000

 [280h 0640   8]                        Value : 000000000000000B
 [288h 0648   8]                         Mask : 00000000000000FF

 [290h 0656   1]                       Action : 0D [Get Error Address Range]
 [291h 0657   1]                  Instruction : 03 [Write Register Value]
 [292h 0658   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [293h 0659   1]                     Reserved : 00

 [294h 0660  12]              Register Region : [Generic Address Structure]
 [294h 0660   1]                     Space ID : 00 [SystemMemory]
 [295h 0661   1]                    Bit Width : 20
 [296h 0662   1]                   Bit Offset : 00
 [297h 0663   1]         Encoded Access Width : 03 [DWord Access:32]
 [298h 0664   8]                      Address : 00000000FEBF3000

 [2A0h 0672   8]                        Value : 000000000000000D
 [2A8h 0680   8]                         Mask : 00000000000000FF

 [2B0h 0688   1]                       Action : 0D [Get Error Address Range]
 [2B1h 0689   1]                  Instruction : 00 [Read Register]
 [2B2h 0690   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [2B3h 0691   1]                     Reserved : 00

 [2B4h 0692  12]              Register Region : [Generic Address Structure]
 [2B4h 0692   1]                     Space ID : 00 [SystemMemory]
 [2B5h 0693   1]                    Bit Width : 40
 [2B6h 0694   1]                   Bit Offset : 00
 [2B7h 0695   1]         Encoded Access Width : 04 [QWord Access:64]
 [2B8h 0696   8]                      Address : 00000000FEBF3008

 [2C0h 0704   8]                        Value : 0000000000000000
 [2C8h 0712   8]                         Mask : FFFFFFFFFFFFFFFF

 [2D0h 0720   1]                       Action : 0E [Get Error Address Length]
 [2D1h 0721   1]                  Instruction : 03 [Write Register Value]
 [2D2h 0722   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [2D3h 0723   1]                     Reserved : 00

 [2D4h 0724  12]              Register Region : [Generic Address Structure]
 [2D4h 0724   1]                     Space ID : 00 [SystemMemory]
 [2D5h 0725   1]                    Bit Width : 20
 [2D6h 0726   1]                   Bit Offset : 00
 [2D7h 0727   1]         Encoded Access Width : 03 [DWord Access:32]
 [2D8h 0728   8]                      Address : 00000000FEBF3000

 [2E0h 0736   8]                        Value : 000000000000000E
 [2E8h 0744   8]                         Mask : 00000000000000FF

 [2F0h 0752   1]                       Action : 0E [Get Error Address Length]
 [2F1h 0753   1]                  Instruction : 00 [Read Register]
 [2F2h 0754   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [2F3h 0755   1]                     Reserved : 00

 [2F4h 0756  12]              Register Region : [Generic Address Structure]
 [2F4h 0756   1]                     Space ID : 00 [SystemMemory]
 [2F5h 0757   1]                    Bit Width : 40
 [2F6h 0758   1]                   Bit Offset : 00
 [2F7h 0759   1]         Encoded Access Width : 04 [QWord Access:64]
 [2F8h 0760   8]                      Address : 00000000FEBF3008

 [300h 0768   8]                        Value : 0000000000000000
 [308h 0776   8]                         Mask : 00000000FFFFFFFF

 [310h 0784   1]                       Action : 0F [Get Error Attributes]
 [311h 0785   1]                  Instruction : 03 [Write Register Value]
 [312h 0786   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [313h 0787   1]                     Reserved : 00

 [314h 0788  12]              Register Region : [Generic Address Structure]
 [314h 0788   1]                     Space ID : 00 [SystemMemory]
 [315h 0789   1]                    Bit Width : 20
 [316h 0790   1]                   Bit Offset : 00
 [317h 0791   1]         Encoded Access Width : 03 [DWord Access:32]
 [318h 0792   8]                      Address : 00000000FEBF3000

 [320h 0800   8]                        Value : 000000000000000F
 [328h 0808   8]                         Mask : 00000000000000FF

 [330h 0816   1]                       Action : 0F [Get Error Attributes]
 [331h 0817   1]                  Instruction : 00 [Read Register]
 [332h 0818   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [333h 0819   1]                     Reserved : 00

 [334h 0820  12]              Register Region : [Generic Address Structure]
 [334h 0820   1]                     Space ID : 00 [SystemMemory]
 [335h 0821   1]                    Bit Width : 20
 [336h 0822   1]                   Bit Offset : 00
 [337h 0823   1]         Encoded Access Width : 03 [DWord Access:32]
 [338h 0824   8]                      Address : 00000000FEBF3008

 [340h 0832   8]                        Value : 0000000000000000
 [348h 0840   8]                         Mask : 00000000FFFFFFFF

 [350h 0848   1]                       Action : 10 [Execute Timings]
 [351h 0849   1]                  Instruction : 03 [Write Register Value]
 [352h 0850   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [353h 0851   1]                     Reserved : 00

 [354h 0852  12]              Register Region : [Generic Address Structure]
 [354h 0852   1]                     Space ID : 00 [SystemMemory]
 [355h 0853   1]                    Bit Width : 20
 [356h 0854   1]                   Bit Offset : 00
 [357h 0855   1]         Encoded Access Width : 03 [DWord Access:32]
 [358h 0856   8]                      Address : 00000000FEBF3000

 [360h 0864   8]                        Value : 0000000000000010
 [368h 0872   8]                         Mask : 00000000000000FF

 [370h 0880   1]                       Action : 10 [Execute Timings]
 [371h 0881   1]                  Instruction : 00 [Read Register]
 [372h 0882   1]        Flags (decoded below) : 00
                       Preserve Register Bits : 0
 [373h 0883   1]                     Reserved : 00

 [374h 0884  12]              Register Region : [Generic Address Structure]
 [374h 0884   1]                     Space ID : 00 [SystemMemory]
 [375h 0885   1]                    Bit Width : 40
 [376h 0886   1]                   Bit Offset : 00
 [377h 0887   1]         Encoded Access Width : 04 [QWord Access:64]
 [378h 0888   8]                      Address : 00000000FEBF3008

 [380h 0896   8]                        Value : 0000000000000000
 [388h 0904   8]                         Mask : FFFFFFFFFFFFFFFF

 Raw Table Data: Length 912 (0x390)

Note that the contents of tests/data/q35/ERST.acpierst and
tests/data/microvm/ERST.pcie are the same except for differences
due to assigned base address.

Files tests/data/pc/DSDT.acpierst and tests/data/acpi/q35/DSDT.acpierst
are new files (and are included as a result of 'make check' process).
Rather than provide the entire content, I am providing the differences
between pc/DSDT and pc/DSDT.acpierst, and the difference between
q35/DSDT and q35/DSDT.acpierst, with an explanation to follow.

diff pc/DSDT pc/DSDT.acpierst:
 @@ -5,13 +5,13 @@
   *
   * Disassembling to symbolic ASL+ operators
   *
 - * Disassembly of tests/data/acpi/pc/DSDT, Thu Dec  2 10:10:13 2021
 + * Disassembly of tests/data/acpi/pc/DSDT.acpierst, Thu Dec  2 12:59:36 2021
   *
   * Original Table Header:
   *     Signature        "DSDT"
 - *     Length           0x00001772 (6002)
 + *     Length           0x00001751 (5969)
   *     Revision         0x01 **** 32-bit table (V1), no 64-bit math support
 - *     Checksum         0x9E
 + *     Checksum         0x95
   *     OEM ID           "BOCHS "
   *     OEM Table ID     "BXPC    "
   *     OEM Revision     0x00000001 (1)
 @@ -964,16 +964,11 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS "

              Device (S18)
              {
 -                Name (_SUN, 0x03)  // _SUN: Slot User Number
                  Name (_ADR, 0x00030000)  // _ADR: Address
 -                Method (_EJ0, 1, NotSerialized)  // _EJx: Eject Device
 -                {
 -                    PCEJ (BSEL, _SUN)
 -                }
 -
 +                Name (ASUN, 0x03)
                  Method (_DSM, 4, Serialized)  // _DSM: Device-Specific Method
                  {
 -                    Return (PDSM (Arg0, Arg1, Arg2, Arg3, BSEL, _SUN))
 +                    Return (PDSM (Arg0, Arg1, Arg2, Arg3, BSEL, ASUN))
                  }
              }

 @@ -1399,11 +1394,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS "

              Method (DVNT, 2, NotSerialized)
              {
 -                If ((Arg0 & 0x08))
 -                {
 -                    Notify (S18, Arg1)
 -                }
 -
                  If ((Arg0 & 0x10))
                  {
                      Notify (S20, Arg1)

diff q35/DSDT and q35/DSDT.acpierst:
 @@ -5,13 +5,13 @@
   *
   * Disassembling to symbolic ASL+ operators
   *
 - * Disassembly of tests/data/acpi/q35/DSDT, Thu Dec  2 10:10:13 2021
 + * Disassembly of tests/data/acpi/q35/DSDT.acpierst, Thu Dec  2 12:59:36 2021
   *
   * Original Table Header:
   *     Signature        "DSDT"
 - *     Length           0x00002061 (8289)
 + *     Length           0x00002072 (8306)
   *     Revision         0x01 **** 32-bit table (V1), no 64-bit math support
 - *     Checksum         0xFA
 + *     Checksum         0x9A
   *     OEM ID           "BOCHS "
   *     OEM Table ID     "BXPC    "
   *     OEM Revision     0x00000001 (1)
 @@ -3278,6 +3278,11 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS "
                  }
              }

 +            Device (S10)
 +            {
 +                Name (_ADR, 0x00020000)  // _ADR: Address
 +            }
 +
              Method (PCNT, 0, NotSerialized)
              {
              }

For both pc and q35, there is but a small difference between this
DSDT.acpierst and the corresponding DSDT. In both cases, the changes
occur under the hiearchy:

    Scope (\_SB)
    {
        Scope (PCI0)
        {

which leads me to believe that the change to the DSDT was needed
due to the introduction of the ERST PCI device.

And is explained in detail by Ani Sinha:
I have convinced myself of the changes we see in the DSDT tables.
On i440fx side, we are adding a non-hotpluggable pci device on slot 3.
So the changes we see are basically replacing an empty hotpluggable
slot on the pci root port with a non-hotplugggable device.
On q35, bsel on pcie root bus is not set (its not hotpluggable bus),
so the change basically adds the address enumeration for the device.

Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-11-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-06 04:33:50 -05:00
Eric DeVolder
646a793cc3 ACPI ERST: bios-tables-test testcase
This change implements the test suite checks for the ERST table.

Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-10-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-06 04:33:50 -05:00
Eric DeVolder
bd24550e5c ACPI ERST: qtest for ERST
This change provides a qtest that locates and then does a simple
interrogation of the ERST feature within the guest.

Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-9-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-06 04:33:50 -05:00
Eric DeVolder
922f48d37a ACPI ERST: bios-tables-test.c steps 1 and 2
Following the guidelines in tests/qtest/bios-tables-test.c, this
change adds empty placeholder files per step 1 for the new ERST
table, and excludes resulting changed files in bios-tables-test-allowed-diff.h
per step 2.

Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1643402289-22216-2-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-06 04:33:42 -05:00
Igor Mammedov
408ca92634 tests: acpi: test short OEM_ID/OEM_TABLE_ID values in test_oem_fields()
Previous patch [1] added explicit whitespace padding to OEM_ID/OEM_TABLE_ID
values used in test_oem_fields() testcase to avoid false positive and
bisection issues when QEMU is switched to \0' padding. As result
testcase ceased to test values that were shorter than max possible
length values.

Update testcase to make sure that it's testing shorter IDs like it
used to before [2].

1) "tests: acpi: manually pad OEM_ID/OEM_TABLE_ID for  test_oem_fields() test"
2) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220114142641.1727679-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-04 09:07:43 -05:00
Igor Mammedov
5adc3aba87 tests: acpi: update expected blobs
Expected changes caused by previous commit:

nvdimm ssdt (q35/pc/virt):
  - *     OEM Table ID     "NVDIMM  "
  + *     OEM Table ID     "NVDIMM"

SLIC test FADT (tests/data/acpi/q35/FACP.slic):
  -[010h 0016   8]                 Oem Table ID : "ME      "
  +[010h 0016   8]                 Oem Table ID : "ME"

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-04 09:07:43 -05:00
Igor Mammedov
d1e4a46541 tests: acpi: whitelist nvdimm's SSDT and FACP.slic expected blobs
The next commit will revert OEM fields whitespace padding to
padding with '\0' as it was before [1]. That will change OEM
Table ID for:
  * SSDT.*: where it was padded from 6 characters to 8
  * FACP.slic: where it was padded from 2 characters to 8
after reverting whitespace padding, it will be replaced with
'\0' which effectively will shorten OEM table ID to 6 and 2
characters.

Whitelist affected tables before introducing the change.

1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-04 09:07:43 -05:00
Igor Mammedov
a849522f72 tests: acpi: manually pad OEM_ID/OEM_TABLE_ID for test_oem_fields() test
The next commit will revert OEM fields padding with whitespace to
padding with '\0' as it was before [1]. As result test_oem_fields() will
fail due to unexpectedly smaller ID sizes read from QEMU ACPI tables.

Pad OEM_ID/OEM_TABLE_ID manually with spaces so that values the test
puts on QEMU CLI and expected values match.

1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-04 09:07:43 -05:00
Thomas Huth
274f5e6343 hw/i386: Add the possibility to disable the 'isapc' machine
We already have a CONFIG_ISAPC switch - but we're not using it yet.
Add some "#ifdefs" to make it possible to disable this machine now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220107160713.235918-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-04 09:07:43 -05:00
John Snow
50465f94d2 python/machine: raise VMLaunchFailure exception from launch()
This allows us to pack in some extra information about the failure,
which guarantees that if the caller did not *intentionally* cause a
failure (by capturing this Exception), some pretty good clues will be
printed at the bottom of the traceback information.

This will help make failures in the event of a non-negative return code
more obvious when they go unhandled; the current behavior in
_post_shutdown() is to print a warning message only in the event of
signal-based terminations (for negative return codes).

(Note: In Python, catching BaseException instead of Exception catches a
broader array of Exception events, including SystemExit and
KeyboardInterrupt. We do not want to "wrap" such exceptions as a
VMLaunchFailure, because that will 'downgrade' the exception from a
BaseException to a regular Exception. We do, however, want to perform
cleanup in either case, so catch on the broadest scope and
wrap-and-re-raise only in the more targeted scope.)

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
2022-02-02 14:12:22 -05:00
Hanna Reitz
95fc339c1b iotests/migration-permissions: New test
This test checks that a raw image in use by a virtio-blk device does not
share the WRITE permission both before and after migration.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
e287a351db iotests: declare lack of support for compresion_type in IMGOPTS
compression_type can't be used if we want to create image with
compat=0.10. So, skip these tests, not many of them.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-20-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
da87d5f83a iotest 214: explicit compression type
The test-case "Corrupted size field in compressed cluster descriptor"
heavily depends on zlib compression type. So, make it explicit. This
way test passes with IMGOPTS='compression_type=zstd'.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-19-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
3a0e60a065 iotests 60: more accurate set dirty bit in qcow2 header
Don't touch other incompatible bits, like compression-type. This makes
the test pass with IMGOPTS='compression_type=zstd'.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-18-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
dba5aee4da iotests: bash tests: filter compression type
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.

Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type), so implement
specific option for it.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
72be51ddb3 iotest 39: use _qcow2_dump_header
_qcow2_dump_header has filter for compression type, so this change
makes test pass with IMGOPTS='compression_type=zstd'.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
984d7a52d5 iotests: massive use _qcow2_dump_header
We are going to add filtering in _qcow2_dump_header and want all tests
use it.

The patch is generated by commands:
  cd tests/qemu-iotests
  sed -ie 's/$PYTHON qcow2.py "$TEST_IMG" dump-header\($\| \)/_qcow2_dump_header\1/' ??? tests/*

(the difficulty is to avoid converting dump-header-exts)

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
c5e627a6ec iotests/common.rc: introduce _qcow2_dump_header helper
We'll use it in tests instead of explicit qcow2.py. Then we are going
to add some filtering in _qcow2_dump_header.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
c30175d6fb iotest 302: use img_info_log() helper
Instead of qemu_img_log("info", ..) use generic helper img_info_log().

img_info_log() has smarter logic. For example it use filter_img_info()
to filter output, which in turns filter a compression type. So it will
help us in future when we implement a possibility to use zstd
compression by default (with help of some runtime config file or maybe
build option). For now to test you should recompile qemu with a small
addition into block/qcow2.c before
"if (qcow2_opts->has_compression_type":

    if (!qcow2_opts->has_compression_type && version >= 3) {
        qcow2_opts->has_compression_type = true;
        qcow2_opts->compression_type = QCOW2_COMPRESSION_TYPE_ZSTD;
    }

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-12-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
e877bba308 iotests.py: filter compression type out
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.

Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type) and it's in bash.
So for now we can safely filter out compression type in all qcow2
tests.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
a70eeb3d47 iotests.py: filter out successful output of qemu-img create
The only "feature" of this "Formatting ..." line is that we have to
update it every time we add new option. Let's drop it.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
12a936171d iotest 065: explicit compression type
The test checks different options. It of course fails if set
IMGOPTS='compression_type=zstd'. So, let's be explicit in what
compression type we want and independent of IMGOPTS. Test both existing
compression types.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
677e0bae68 iotest 303: explicit compression type
The test prints qcow2 header fields which depends on chosen compression
type. So, let's be explicit in what compression type we want and
independent of IMGOPTS. Test both existing compression types.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-8-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
28a5ad93da iotests.py: rewrite default luks support in qemu_img
Move the logic to more generic qemu_img_pipe_and_status(). Also behave
better when we have several -o options. And reuse argument parser of
course.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
8f9e54ccfd iotests: drop qemu_img_verbose() helper
qemu_img_verbose() has a drawback of not going through generic
qemu_img_pipe_and_status(). qemu_img_verbose() is not very popular, so
update the only two users to qemu_img_log() and drop qemu_img_verbose()
at all.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
22e29bcea1 iotests.py: qemu_img*("create"): support IMGOPTS='compression_type=zstd'
Adding support of IMGOPTS (like in bash tests) allows user to pass a
lot of different options. Still, some may require additional logic.

Now we want compression_type option, so add some smart logic around it:
ignore compression_type=zstd in IMGOPTS, if test want qcow2 in
compatibility mode. As well, ignore compression_type for non-qcow2
formats.

Note that we may instead add support only to qemu_img_create(), but
that works bad:

1. We'll have to update a lot of tests to use qemu_img_create instead
   of qemu_img('create'). (still, we may want do it anyway, but no
   reason to create a dependancy between task of supporting IMGOPTS and
   updating a lot of tests)

2. Some tests use qemu_img_pipe('create', ..) - even more work on
   updating

3. Even if we update all tests to go through qemu_img_create, we'll
   need a way to avoid creating new tests using qemu_img*('create') -
   add assertions.. That doesn't seem good.

So, let's add support of IMGOPTS to most generic
qemu_img_pipe_and_status().

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
b30b807724 iotests: specify some unsupported_imgopts for python iotests
We are going to support IMGOPTS for python iotests. Still some iotests
will not work with common IMGOPTS used with bash iotests like
specifying refcount_bits and compat qcow2 options. So we
should define corresponding unsupported_imgopts for now.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223160144.1097696-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
7c15400cdd iotests.py: implement unsupported_imgopts
We are going to support some addition IMGOPTS in python iotests like
in bash iotests. Similarly to bash iotests, we want a way to skip some
tests which can't work with specific IMGOPTS.

Globally for python iotests we will not support things like
'data_file=$TEST_IMG.ext_data_file' in IMGOPTS, so, forbid this
globally in iotests.py.

Suggested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Vladimir Sementsov-Ogievskiy
3bd2b942d9 iotests.py: img_info_log(): rename imgopts argument
We are going to support IMGOPTS environment variable like in bash
tests. Corresponding global variable in iotests.py should be called
imgopts. So to not interfere with function argument, rename it in
advance.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Hanna Reitz
fc2c3996a5 iotests/MRCE: Write data to source
This test assumes that mirror flushes the source when entering the READY
state, and that the format level will pass that flush on to the protocol
level (where we intercept it with blkdebug).

However, apparently that does not happen when using a VMDK image with
zeroed_grain=on, which actually is the default set by testenv.py.  Right
now, Python tests ignore IMGOPTS, though, so this has no effect; but
Vladimir has a series that will change this, so we need to fix this test
before that series lands.

We can fix it by writing data to the source before we start the mirror
job; apparently that makes the (VMDK) format layer change its mind and
pass on the pre-READY flush to the protocol level, so the test passes
again.  (I presume, without any data written, mirror just does a 64M
zero write on the target, which VMDK with zeroed_grain=on basically just
ignores.)

Without this, we do not get a flush, and so blkdebug only sees a single
flush at the end of the job instead of two, and therefore does not
inject an error, which makes the block job complete instead of raising
an error.

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223165308.103793-1-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2022-02-01 10:51:39 +01:00
Thomas Huth
0c83471bd7 tests/qemu-iotests: Fix 051 for binaries without 'lsi53c895a'
The lsi53c895a SCSI adaptor might not be enabled in each and every
x86 QEMU binary, e.g. it's disabled in the RHEL/CentOS build.
Thus let's add a check to the 051 test so that it does not fail if
this device is not available.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206143404.247032-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-02-01 10:51:39 +01:00
Hanna Reitz
6384dd534d iotests/block-status-cache: New test
Add a new test to verify that want_zero=false block-status calls do not
pollute the block-status cache for want_zero=true calls.

We check want_zero=true calls and their results using `qemu-img map`
(over NBD), and want_zero=false calls also using `qemu-img map` over
NBD, but using the qemu:allocation-depth context.

(This test case cannot be integrated into nbd-qemu-allocation, because
that is a qcow2 test, and this is a raw test.)

Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-3-hreitz@redhat.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2022-01-28 16:55:23 -06:00
Peter Maydell
7a1043cef9 * configure and meson fixes
* "meson test" switch for iotests
 * deprecation of old SGX QAPI
 * unexport InterruptStatsProviderClass-related functions
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHzwdAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroOlMwgApVO6T934TwuTOFBs02Tp8KcjcKQq
 5Qf5PrwbsluE8YixJERAFgfxgzbQKL/iHzkP97KoVo3CFFDc1sss7v3mrbbHxbwB
 jiYIgbNjRfBbZq7nNmxf2bcXxTpZYvMNEia0QPyNl1GQ0JS/RFOsEYcyVUPvVmAI
 djeESRyku1OS5bS5veqE2tL+AWDuodjHeW78qi+yIDRPx3jHLRzuGpQ/3KtgMN6o
 d61h5vVrqdxe1HYH/8sh+qU71w7drpNZVYq8PqkZyit/LXgDMyDDOks1XWarrrJE
 9xzNBUNR+B6CuHtNw1DGk4rvsCBV/F0ZVki6guVGoqG8njF3l6xyqRHPbw==
 =2/gW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* configure and meson fixes
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions

# gpg: Signature made Fri 28 Jan 2022 10:13:36 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
  configure: fix parameter expansion of --cross-cc-cflags options
  qapi: Cleanup SGX related comments and restore @section-size
  check-block: replace -makecheck with TAP output
  qemu-iotests: require at least an argument to check-block.sh
  build: make check-block a meson test
  scripts/mtest2make: add support for SPEED=thorough
  check-block.sh: passthrough -jN flag of make to -j N flag of check
  meson: Use find_program() to resolve the entitlement.sh script
  exec/cpu: Make host pages variables / macros 'target agnostic'
  meson.build: Use a function from libfdt 1.5.1 for the library check
  intc: Unexport InterruptStatsProviderClass-related functions
  docker: add msitools to Fedora/mingw cross
  build-sys: fix undefined ARCH error
  build-sys: fix a meson deprecation warning

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-28 14:04:01 +00:00
Paolo Bonzini
d316859f4e check-block: replace -makecheck with TAP output
Let "meson test" take care of showing the results of the individual tests,
consistently with other output from "make check V=1".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-28 11:13:33 +01:00
Paolo Bonzini
18c1cdd21d qemu-iotests: require at least an argument to check-block.sh
This is anyway how check-block.sh is used in practice, and by removing the
list of formats in the script we avoid duplication between meson.build
and check-block.sh.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-28 11:13:33 +01:00
Paolo Bonzini
98487b9035 build: make check-block a meson test
"meson test" can be asked to run tests verbosely; this makes it usable
also for qemu-iotests's own harness, and it lets "make check-block"
reuse mtest2make.py's infrastructure to find and build test dependencies.

Adjust check-block.sh to use the standard exit code that reports a test
as skipped.  Alternatively, in the future we could make it produce TAP
output, which is consistent with all other "make check" tests.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-28 11:13:33 +01:00
Vladimir Sementsov-Ogievskiy
bcda7b178f check-block.sh: passthrough -jN flag of make to -j N flag of check
This improves performance of running iotests during "make -jN check".

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223183933.1497037-1-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-28 11:13:33 +01:00
Vladimir Sementsov-Ogievskiy
761a1a488e qapi: generate trace events by default
We don't generate trace events for tests/ and qga/ because that it is
not simple and not necessary. We have corresponding comments in both
tests/meson.build and qga/meson.build.

Still to not miss possible future qapi code generation call, and not to
forget to enable trace events generation, let's enable it by default.
So, turn option --gen-trace into opposite --no-trace-events and use new
option only in tests/ and qga/ where we already have good comments why
we don't generate trace events code.

Note that this commit enables trace-events generation for qapi-gen.py
call from tests/qapi-schema/meson.build and storage-daemon/meson.build.
Still, both are kind of noop: tests/qapi-schema/ doesn't seem to
generate any QMP command code and no .trace-events files anyway,
storage-daemon/ uses common QMP command implementations and just
generate empty .trace-events

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-8-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2022-01-27 15:17:35 +01:00
Vladimir Sementsov-Ogievskiy
378dfa482d meson: document why we don't generate trace events for tests/ and qga/
Making trace generation work for tests/ and qga/ would involve some
Meson hackery to ensure we generate the trace-events files before
trace-tool uses them. Since we don't actually support tracing there
anyway, we bypass that problem.

Let's add corresponding comments.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220126161130.3240892-7-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Pasto fixed, commit message punctuation tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2022-01-27 15:17:35 +01:00
Marc-André Lureau
b422da4b3f docker: add msitools to Fedora/mingw cross
That should help catch build issues/regressions with wixl.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220114084312.3725242-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-27 12:08:44 +01:00
Marc-André Lureau
861aa79ad8 build-sys: fix a meson deprecation warning
WARNING: Deprecated features used:
 * 0.56.0: {'meson.source_root'}

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220113162148.3621818-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-27 12:08:12 +01:00
Yanan Wang
3cda85b203 tests/acpi/bios-table-test: Update expected virt/PPTT file
Run ./tests/data/acpi/rebuild-expected-aml.sh from build directory
to update PPTT binary. Also empty bios-tables-test-allowed-diff.h.

The disassembled differences between actual and expected PPTT:

 /*
  * Intel ACPI Component Architecture
  * AML/ASL+ Disassembler version 20200528 (64-bit version)
  * Copyright (c) 2000 - 2020 Intel Corporation
  *
- * Disassembly of tests/data/acpi/virt/PPTT, Tue Jan  4 12:51:11 2022
+ * Disassembly of /tmp/aml-2ZGOF1, Tue Jan  4 12:51:11 2022
  *
  * ACPI Data Table [PPTT]
  *
  * Format: [HexOffset DecimalOffset ByteLength]  FieldName : FieldValue
  */

 [000h 0000   4]                    Signature : "PPTT"    [Processor Properties Topology Table]
-[004h 0004   4]                 Table Length : 0000004C
+[004h 0004   4]                 Table Length : 00000060
 [008h 0008   1]                     Revision : 02
-[009h 0009   1]                     Checksum : A8
+[009h 0009   1]                     Checksum : 48
 [00Ah 0010   6]                       Oem ID : "BOCHS "
 [010h 0016   8]                 Oem Table ID : "BXPC    "
 [018h 0024   4]                 Oem Revision : 00000001
 [01Ch 0028   4]              Asl Compiler ID : "BXPC"
 [020h 0032   4]        Asl Compiler Revision : 00000001

 [024h 0036   1]                Subtable Type : 00 [Processor Hierarchy Node]
 [025h 0037   1]                       Length : 14
 [026h 0038   2]                     Reserved : 0000
 [028h 0040   4]        Flags (decoded below) : 00000001
                             Physical package : 1
                      ACPI Processor ID valid : 0
                        Processor is a thread : 0
                               Node is a leaf : 0
                     Identical Implementation : 0
 [02Ch 0044   4]                       Parent : 00000000
 [030h 0048   4]            ACPI Processor ID : 00000000
 [034h 0052   4]      Private Resource Number : 00000000

 [038h 0056   1]                Subtable Type : 00 [Processor Hierarchy Node]
 [039h 0057   1]                       Length : 14
 [03Ah 0058   2]                     Reserved : 0000
-[03Ch 0060   4]        Flags (decoded below) : 0000000A
+[03Ch 0060   4]        Flags (decoded below) : 00000000
                             Physical package : 0
-                     ACPI Processor ID valid : 1
+                     ACPI Processor ID valid : 0
                        Processor is a thread : 0
-                              Node is a leaf : 1
+                              Node is a leaf : 0
                     Identical Implementation : 0
 [040h 0064   4]                       Parent : 00000024
 [044h 0068   4]            ACPI Processor ID : 00000000
 [048h 0072   4]      Private Resource Number : 00000000

-Raw Table Data: Length 76 (0x4C)
+[04Ch 0076   1]                Subtable Type : 00 [Processor Hierarchy Node]
+[04Dh 0077   1]                       Length : 14
+[04Eh 0078   2]                     Reserved : 0000
+[050h 0080   4]        Flags (decoded below) : 0000000A
+                            Physical package : 0
+                     ACPI Processor ID valid : 1
+                       Processor is a thread : 0
+                              Node is a leaf : 1
+                    Identical Implementation : 0
+[054h 0084   4]                       Parent : 00000038
+[058h 0088   4]            ACPI Processor ID : 00000000
+[05Ch 0092   4]      Private Resource Number : 00000000
+
+Raw Table Data: Length 96 (0x60)

-    0000: 50 50 54 54 4C 00 00 00 02 A8 42 4F 43 48 53 20  // PPTTL.....BOCHS
+    0000: 50 50 54 54 60 00 00 00 02 48 42 4F 43 48 53 20  // PPTT`....HBOCHS
     0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43  // BXPC    ....BXPC
     0020: 01 00 00 00 00 14 00 00 01 00 00 00 00 00 00 00  // ................
-    0030: 00 00 00 00 00 00 00 00 00 14 00 00 0A 00 00 00  // ................
-    0040: 24 00 00 00 00 00 00 00 00 00 00 00              // $...........
+    0030: 00 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00  // ................
+    0040: 24 00 00 00 00 00 00 00 00 00 00 00 00 14 00 00  // $...............
+    0050: 0A 00 00 00 38 00 00 00 00 00 00 00 00 00 00 00  // ....8...........

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20220107083232.16256-7-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20 11:47:52 +00:00
Yanan Wang
291f6dd566 tests/acpi/bios-tables-test: Allow changes to virt/PPTT file
List test/data/acpi/virt/PPTT as the expected files allowed to
be changed in tests/qtest/bios-tables-test-allowed-diff.h

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20220107083232.16256-5-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20 11:47:52 +00:00
Peter Maydell
5e0214cdee * Fix bits in one of the PMCW channel subsystem masks
* s390x TCG shift instruction fixes
 * Re-organization for the MAINTAINERS file
 * Support for extended length of kernel command lines
 * Re-order the SIGP STOP code
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmHnyxkRHHRodXRoQHJl
 ZGhhdC5jb20ACgkQLtnXdP5wLbUN3w/+MpP0vuY69e82QJyNBp+ysNkY0glfrMOg
 b9fLoXr3HYLreyd6A08649lSUO43OG2+rDmCYZvfs02k6bM4vGReGHmfDYpfRE8b
 7viX7kV7RQuzf+54PdMQ1ojtflGBtbbo82bsIcgVoKTl8o1VIoTqWl3u49yo/y1z
 A67tKeelS95l6mZlkEGX0UCdXO7yFc6p29gVasdaJb1M3aJl+Vez2t6ElQKJwe3d
 V93Jdpd4lyuiRKt/gn9LyXZNSCqfNnLGKB1bz/vMktXhx/hCnI4qBBDAIov3Hvr2
 dWXAdCVpWtJRrE2ZPqAaxqN9PidgWwjKHvjXjEh4UG01neOdHPvN3tzFMmpbtY4P
 Is/HfZMXeaOA3ZD9hhEIzwcXXJFzC7Cqke79KHDaupQcJ+A5ypEWqfEuIfCbrWHz
 RFdqTIvzTUf98dZjz8dO1YS3srRXE0/kLJX0RbbhWAPZoLCiwRu4jnfcz4Cu+oJG
 gHTQI3qRZYk+kFgWyAJ3IgTiSkULFgquFEyj6yH1yE63hFjBoS7NTtIMjovihOyC
 ho8yD4t/qCzw/u7zqCph0pTydYYNWgCo80DdQmnHS/S/kODoePvriDcw1Sza9CLf
 9OcK8AEcrI857xoxp/AXGNRcY/Rl/Z5lEuNEAr74zUNGnPdGo6pTIU9gsmhgJEyb
 R2lt+xOkTJ4=
 =XtZt
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-01-19' into staging

* Fix bits in one of the PMCW channel subsystem masks
* s390x TCG shift instruction fixes
* Re-organization for the MAINTAINERS file
* Support for extended length of kernel command lines
* Re-order the SIGP STOP code

# gpg: Signature made Wed 19 Jan 2022 08:26:01 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2022-01-19:
  s390x: sigp: Reorder the SIGP STOP code
  s390x/ipl: support extended kernel command line size
  MAINTAINERS: Add myself to s390 I/O areas
  MAINTAINERS: split out s390x sections
  tests/tcg/s390x: Test shift instructions
  target/s390x: Fix shifting 32-bit values for more than 31 bits
  target/s390x: Fix cc_calc_sla_64() missing overflows
  target/s390x: Fix SRDA CC calculation
  target/s390x: Fix SLDA sign bit index
  s390x/css: fix PMCW invalid mask

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-19 16:37:46 +00:00
Peter Maydell
3d228a741a Various testing and other misc updates:
- fix compiler warnings with ui and sdl
   - update QXL/spice dependancy
   - skip I/O tests on Alpine
   - update fedora image to latest version
   - integrate lcitool and regenerate docker images
   - favour CONFIG_LINUX_USER over CONFIG_LINUX
   - add libfuse3 dependencies to docker images
   - add dtb-kaslr-seed control knob to virt machine
   - fix build breakage from HMP update
   - update docs for C standard and suffix usage
   - add more logging for debugging user hole finding
   - expand reserve for brk() for static 64 bit programs
   - fix bug with linux-user hole calculation
   - avoid affecting flags when printing results in float tests
   - add float reference files for ppc64
   - update FreeBSD to 12.3
   - add bison dependancy to tricore images
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmHm7y4ACgkQ+9DbCVqe
 KkSsDwgAgWiOUtnPxNnZ3PuLQpIDCGSotjshCXo9PhPu/SWedvMfTftPU+g3wxbl
 +A2GZcNnVPaOrJo7hfDtOtir9UJUFTmyv8KtPhUYmtxxiv3HWM1RvgrBQnMEvo5A
 GFAq6jSFclH4HTSxz4FHbEl0TM3feQbSfbMWI6Q1Q+aPm8hWSzhClIqBCwsJJdm8
 hi76BE9o94BtvA6Qv2CoPvGsOzpV0X0VXaljf1W927BzJu+b0wEGwIm61+eovNsh
 DS2kDZk+PpiYeRN/oC40Z6ozR/Lf/jZ/87AnN3gV/yLDwa5cafA+GtmcKMx1IJIc
 BVm0bJo+KzHfYiVjYTJhsU7C2W71PA==
 =uBQq
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-7.0-180122-2' into staging

Various testing and other misc updates:

  - fix compiler warnings with ui and sdl
  - update QXL/spice dependancy
  - skip I/O tests on Alpine
  - update fedora image to latest version
  - integrate lcitool and regenerate docker images
  - favour CONFIG_LINUX_USER over CONFIG_LINUX
  - add libfuse3 dependencies to docker images
  - add dtb-kaslr-seed control knob to virt machine
  - fix build breakage from HMP update
  - update docs for C standard and suffix usage
  - add more logging for debugging user hole finding
  - expand reserve for brk() for static 64 bit programs
  - fix bug with linux-user hole calculation
  - avoid affecting flags when printing results in float tests
  - add float reference files for ppc64
  - update FreeBSD to 12.3
  - add bison dependancy to tricore images

# gpg: Signature made Tue 18 Jan 2022 16:47:42 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-for-7.0-180122-2: (31 commits)
  docker: include bison in debian-tricore-cross
  FreeBSD: Upgrade to 12.3 release
  test/tcg/ppc64le: Add float reference files
  tests/tcg/multiarch: Read fp flags before printf
  linux-user: don't adjust base of found hole
  linux-user/elfload: add extra logging for hole finding
  linux-user: expand reserved brk space for 64bit guests
  docs/devel: more documentation on the use of suffixes
  docs/devel: update C standard to C11
  monitor: move x-query-profile into accel/tcg to fix build
  hw/arm: add control knob to disable kaslr_seed via DTB
  tests/docker: add libfuse3 development headers
  tests/tcg: use CONFIG_LINUX_USER, not CONFIG_LINUX
  tests/docker: auto-generate alpine.docker with lcitool
  tests/docker: fully expand the alpine package list
  tests/docker: fix sorting of alpine image package lists
  tests/docker: updates to alpine package list
  .gitlab-ci.d/cirrus: auto-generate variables with lcitool
  tests/docker: remove ubuntu.docker container
  tests/docker: auto-generate opensuse-leap.docker with lcitool
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-19 11:49:56 +00:00
Peter Maydell
dea52c223b trivial patches pull request 20220118
Fix comments and typos
 Add vmstate for ETRAX timers
 Use ldst in megasas
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmHmslQSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748Q3wQAJ05K2z2dxGbK/25gMiZxT7CajTLKIz6
 nuHDz7GRFCNPsKZJbwOkBqVX+S6cDk9Du6zzUmD7lP9RDyAi8yqy2Au8oEyMmpWC
 hGRY8TUJRoyc33c4ND2SfmyIYQF5Hl477C05o+YnQogjqVN1RfXvukuRl97LxsCr
 9VP2Z1n5ykfb/CAUt52P2oXDCgPohw9EA3lPgKz1b/qBmgYbvnhlMzNmw9nOJkNb
 2WtIBDzWORcRCjIMbfkEJOuAVMKGXor8fw1qfFCMF9UggHDT+BYhScKp1hL1LNcp
 qe5X3+FvlU4hR0c3WID/3xVrnkHYRa/BurpdG1O+4tku8DlItX2GgpQyhFheLTV+
 JGl2yRY2j/8VBq50DhqUxH9NTMQ1nhVeVbQRxCXhGT4qrFwRxa421IwA+EXh4ALw
 k25kHsOGcOheR+pz489ZIfqBYlNnOjxLmp4gJKWuIWKStBbzpUjgJ0QRHcGyFcHy
 +tb4sJsGa8O1EcjrnIsVEwrQnupY7M26UqOghsYwMNkj8pXFQC8EkDPzkxZM5MlZ
 Zf5JGnMw8nBqvNwmagY+YNbOAXwxS0vDQUbBsEjjCuBCq6XeThPnfc/G/8dTsB6Y
 hYZBtOSdGBVRof3+VXDYRg9uLRgfmD26Cxg5l9qz2GqjLE9QMCb+Yuy07E4lISD7
 AzqUKof59Cdt
 =0iuX
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/lvivier-gitlab/tags/trivial-branch-for-7.0-pull-request' into staging

trivial patches pull request 20220118

Fix comments and typos
Add vmstate for ETRAX timers
Use ldst in megasas

# gpg: Signature made Tue 18 Jan 2022 12:28:04 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/lvivier-gitlab/tags/trivial-branch-for-7.0-pull-request:
  linux-user: Remove MAX_SIGQUEUE_SIZE
  linux-user: Return void from queue_signal()
  linux-user: Rename user_force_sig tracepoint to match function name
  linux-user: Fix comment typo in arm cpu_loop code
  softmmu: Provide a clue as to why device tree loading failed
  tests: Fix typo in check-help output
  qdev-core.h: Fix wrongly named reference to TYPE_SPLIT_IRQ
  hw/scsi/megasas: Simplify using the ldst API
  hw/timer/etraxfs_timer: Add vmstate for ETRAX timers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-18 22:27:13 +00:00
Paolo Bonzini
3265d1fc77 docker: include bison in debian-tricore-cross
Binutils sometimes fail to build if bison is not installed:

  /bin/sh ./ylwrap `test -f arparse.y || echo ./`arparse.y y.tab.c arparse.c y.tab.h arparse.h y.output arparse.output --  -d
  ./ylwrap: 109: ./ylwrap: -d: not found

(the correct invocation of ylwrap would have "bison -d" after the double
dash).  Work around by installing it in the container.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/596
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221111624.352804-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220105135009.1584676-34-alex.bennee@linaro.org>
2022-01-18 16:44:16 +00:00
Brad Smith
e850897e67 FreeBSD: Upgrade to 12.3 release
Note, since libtasn1 was fixed in 12.3 [*], this commit re-enables GnuTLS.

[*] https://gitlab.com/gnutls/libtasn1/-/merge_requests/71

Signed-off-by: Brad Smith <brad@comstyle.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <YdUCQLVe5JSWZByQ@humpty.home.comstyle.com>
Message-Id: <20220105135009.1584676-31-alex.bennee@linaro.org>
2022-01-18 16:44:16 +00:00
Richard Henderson
3118bfbf07 test/tcg/ppc64le: Add float reference files
Generated on Power9, PowerNV 9006-22P.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211224035541.2159966-3-richard.henderson@linaro.org>
Message-Id: <20220105135009.1584676-30-alex.bennee@linaro.org>
2022-01-18 16:44:16 +00:00
Richard Henderson
603bd9c25e tests/tcg/multiarch: Read fp flags before printf
We need to read the floating-point flags before printf may do
other floating-point operations which may affect the flags.

Hexagon reference files regenerated by Taylor Simpson.

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1639510781-3790-1-git-send-email-tsimpson@quicinc.com>
Message-Id: <20211224035541.2159966-2-richard.henderson@linaro.org>
Message-Id: <20220105135009.1584676-29-alex.bennee@linaro.org>
2022-01-18 16:44:16 +00:00
Stefan Hajnoczi
7bef20d729 tests/docker: add libfuse3 development headers
The FUSE exports feature is not built because most container images do
not have libfuse3 development headers installed. Add the necessary
packages to the Dockerfiles.

Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Tested-by: Beraldo Leal <bleal@redhat.com>
Message-Id: <20211207160025.52466-1-stefanha@redhat.com>
[AJB: migrate to lcitool qemu.yml and regenerate]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20220105135009.1584676-21-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Paolo Bonzini
91ad2244b7 tests/tcg: use CONFIG_LINUX_USER, not CONFIG_LINUX
The two more or less overlap, because CONFIG_LINUX is a requirement for Linux
user-mode emulation.  However, CONFIG_LINUX is technically a host symbol
that applies even to system emulation.  Defining CONFIG_LINUX_USER, and
CONFIG_BSD_USER for eventual future use, is cleaner.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211210084836.25202-1-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220105135009.1584676-20-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé
e1cb5c7550 tests/docker: auto-generate alpine.docker with lcitool
This commit is best examined using the "-b" option to diff.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-19-berrange@redhat.com>
Message-Id: <20220105135009.1584676-19-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé
e630278008 tests/docker: fully expand the alpine package list
Add many extra alpine packages to cover the various optional QEMU build
dependencies pulled in by other dockerfiles.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-18-berrange@redhat.com>
Message-Id: <20220105135009.1584676-18-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé
46b1c19bec tests/docker: fix sorting of alpine image package lists
"python" sorts alphabetically after "py3-xxxx"

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-17-berrange@redhat.com>
Message-Id: <20220105135009.1584676-17-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé
8d55280160 tests/docker: updates to alpine package list
Cleanup the package lists by removing some entries that we don't need to
directly reference

  binutils: implied by the compiler toolchain
  coreutils: not required by QEMU build
  mesa-egl mesa-gbm: implied by mesa-dev
  ninja: alias for samurai package
  shadow: not required by QEMU build
  util-linux-dev: not directly required by QEMU build

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-16-berrange@redhat.com>
Message-Id: <20220105135009.1584676-16-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé
c45a540f4b .gitlab-ci.d/cirrus: auto-generate variables with lcitool
The current Cirrus CI variables files were previously generated by using
lcitool. This change wires them up to the refresh script to make that
link explicit.

This changes the package list because libvirt-ci now knows about the
mapping for dtc on FreeBSD and macOS platforms.

The variables are also now emit in sorted order for stability across
runs.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-15-berrange@redhat.com>
Message-Id: <20220105135009.1584676-15-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé
6815e63f31 tests/docker: remove ubuntu.docker container
This duplicates the ubuntu2004 container but with an inconsistent set of
packages.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-14-berrange@redhat.com>
Message-Id: <20220105135009.1584676-14-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé
122198393d tests/docker: auto-generate opensuse-leap.docker with lcitool
This commit is best examined using the "-b" option to diff.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-13-berrange@redhat.com>
Message-Id: <20220105135009.1584676-13-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé
bb317c3258 tests/docker: auto-generate ubuntu2004.docker with lcitool
This commit is best examined using the "-b" option to diff.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-12-berrange@redhat.com>
Message-Id: <20220105135009.1584676-12-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé
e482191643 tests/docker: auto-generate ubuntu1804.docker with lcitool
This commit is best examined using the "-b" option to diff.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-11-berrange@redhat.com>
Message-Id: <20220105135009.1584676-11-alex.bennee@linaro.org>
2022-01-18 16:42:42 +00:00
Daniel P. Berrangé
05e47b75cb tests/docker: auto-generate fedora.docker with lcitool
This commit is best examined using the "-b" option to diff.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-10-berrange@redhat.com>
Message-Id: <20220105135009.1584676-10-alex.bennee@linaro.org>
2022-01-18 16:42:41 +00:00
Daniel P. Berrangé
21ea888fc2 tests/docker: auto-generate centos8.docker with lcitool
This commit is best examined using the "-b" option to diff.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-9-berrange@redhat.com>
Message-Id: <20220105135009.1584676-9-alex.bennee@linaro.org>
2022-01-18 16:42:41 +00:00