Introduce an sccb_mask_t to be used for SCLP event masks instead of just
unsigned int or uint32_t. This will allow later to extend the mask with
more ease.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1519407778-23095-3-git-send-email-imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The other event handlers (quiesce and cpu) do not define these
handlers, and this one does nothing, so it can be removed.
Signed-off-by: Nia Alarie <nia.alarie@gmail.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180306100721.19419-1-nia.alarie@gmail.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Not needed anymore after removal of the memory hotplug code.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
From an architecture point of view, nothing can be mapped into the address
space on s390x. All there is is memory. Therefore there is also not really
an interface to communicate such information to the guest. All we can do is
specify the maximum ram address and guests can probe in that range if
memory is available and usable (TPROT).
Also memory hotplug is strange. The guest can decide at some point in
time to add / remove memory in some range. While the hypervisor can deny
to online an increment, all increments have to be predefined and there is
no way of telling the guest about a newly "hotplugged" increment. So if we
specify right now e.g.
-m 2G,slots=2,maxmem=20G
An ordinary fedora guest will happily online (hotplug) all memory,
resulting in a guest consuming 20G. So it really behaves rather like
-m 22G
There is no way to hotplug memory from the outside like on other
architectures. This is of course bad for upper management layers.
As the guest can create/delete memory regions while it is running, of
course migration support is not available and tricky to implement.
With virtualization, it is different. We might want to map something
into guest address space (e.g. fake DAX devices) and not detect it
automatically as memory. So we really want to use the maxmem and slots
parameter just like on all other architectures. Such devices will have
to expose the applicable memory range themselves. To finally be able to
provide memory hotplug to guests, we will need a new paravirtualized
interface to do that (e.g. something into the direction of virtio-mem).
This implies, that maxmem cannot be used for s390x memory hotplug
anymore and has to go. This simplifies the code quite a bit.
As migration support is not working, this change cannot really break
migration as guests without slots and maxmem don't see the SCLP
features. Also, the ram size calculation does not change.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180219174231.10874-1-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
[CH: tweaked patch description, as discussed on list]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
-----BEGIN PGP SIGNATURE-----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=DMbf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' into staging
Miscellaneous patches for 2018-02-07
# gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2018-02-07-v4:
Move include qemu/option.h from qemu-common.h to actual users
Drop superfluous includes of qapi/qmp/qjson.h
Drop superfluous includes of qapi/qmp/dispatch.h
Include qapi/qmp/qnull.h exactly where needed
Include qapi/qmp/qnum.h exactly where needed
Include qapi/qmp/qbool.h exactly where needed
Include qapi/qmp/qstring.h exactly where needed
Include qapi/qmp/qdict.h exactly where needed
Include qapi/qmp/qlist.h exactly where needed
Include qapi/qmp/qobject.h exactly where needed
qdict qlist: Make most helper macros functions
Eliminate qapi/qmp/types.h
Typedef the subtypes of QObject in qemu/typedefs.h, too
Include qmp-commands.h exactly where needed
Drop superfluous includes of qapi/qmp/qerror.h
Include qapi/error.h exactly where needed
Drop superfluous includes of qapi-types.h and test-qapi-types.h
Clean up includes
Use #include "..." for our own headers, <...> for others
vnc: use stubs for CONFIG_VNC=n dummy functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This avoids tons of conversions when handling interrupts.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This avoids tons of conversions when handling interrupts.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Move floating interrupt handling into the flic. Floating interrupts
will now be considered by all CPUs, not just CPU #0. While at it, convert
I/O interrupts to use a list and make sure we properly consider I/O
sub-classes in s390_cpu_has_io_int().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let the flic device handle it internally. This will allow us to later
on store floating interrupts in the flic for the TCG case.
This now also simplifies kvm.c. All that's left is the fallback
interface for floating interrupts, which is now triggered directly via
the flic in case anything goes wrong.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This makes it clearer, which device is used for which accelerator.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
System headers should be included with <...>, our own headers with
"...". Offenders tracked down with an ugly, brittle and probably
buggy Perl script. Previous iteration was commit a9c94277f0.
Delete inclusions of "string.h" and "strings.h" instead of fixing them
to <string.h> and <strings.h>, because we always include these via
osdep.h.
Put the cleaned up system header includes first.
While there, separate #include from file comment with exactly one
blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-2-armbru@redhat.com>
The default css 0xfe is currently restricted to virtual subchannel
devices. The hope when the decision was made was, that non-virtual
subchannel devices will come around when guest can exploit multiple
channel subsystems. Since the guests generally don't do, the pain
of the partitioned (cssid) namespace outweighs the gain.
Let us remove the corresponding restrictions (virtual devices
can be put only in 0xfe and non-virtual devices in any css except
the 0xfe -- while s390-squash-mcss then remaps everything to cssid 0).
At the same time, change our schema for generating css bus ids to put
both virtual and non-virtual devices into the default css (spilling over
into other css images, if needed). The intention is to deprecate
s390-squash-mcss. With this change devices without a specified devno
won't end up hidden to guests not supporting multiple channel subsystems,
unless this can not be avoided (default css full).
Let us also advertise the changes to the management software (so it can
tell are cssids unrestricted or restricted).
The adverse effect of getting rid of the restriction on migration should
not be too severe. Vfio-ccw devices are not live-migratable yet, and for
virtual devices using the extra freedom would only make sense with the
aforementioned guest support in place.
The auto-generated bus ids are affected by both changes. We hope to not
encounter any auto-generated bus ids in production as Libvirt is always
explicit about the bus id. Since 8ed179c937 ("s390x/css: catch section
mismatch on load", 2017-05-18) the worst that can happen because the same
device ended up having a different bus id is a cleanly failed migration.
I find it hard to reason about the impact of changed auto-generated bus
ids on migration for command line users as I don't know which rules is
such an user supposed to follow.
Another pain-point is down- or upgrade of QEMU for command line users.
The old way and the new way of doing vfio-ccw are mutually incompatible.
Libvirt is only going to support the new way, so for libvirt users, the
possible problems at QEMU downgrade are the following. If a domain
contains virtual devices placed into a css different than 0xfe the domain
will refuse to start with a QEMU not having this patch. Putting devices
into a css different that 0xfe however won't make much sense in the near
future (guest support). Libvirt will refuse to do vfio-ccw with a QEMU
not having this patch. This is business as usual.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20171206144438.28908-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is broken and not even wired up. We'll add a new handler soon, but
that will live somewhere else.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Starting a guest with
<os>
<type arch='s390x' machine='s390-ccw-virtio-2.9'>hvm</type>
</os>
<cpu mode='host-model'/>
on an IBM z14 results in
"qemu-system-s390x: Some features requested in the CPU model are not
available in the configuration: gs"
This is because guarded storage is fenced for compat machines that did
not have guarded storage support. While this prevents future migration
abort (by not starting the guest at all), not being able to start a
"host-model" guest is very much unexpected. As it turns out, even if we
would modify libvirt to not expand the cpu model to contain "gs" for
compat machines, it cannot guarantee that a migration will succeed. For
example if the kernel changes its features (or the user has nested=1 on
one host but not on the other) the migration will fail nevertheless. So
instead of fencing "gs" for machines <= 2.9 lets allow it for all
machine types that support the CPU model. This will make "host-model"
runnable all the time, while relying on the CPU model to reject invalid
migration attempts. We also need to change the migration for guarded
storage.
Additional discussions about host-model are still pending but are out
of scope of this patch.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Simplify the error handling of the MSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-8-pasic@linux.vnet.ibm.com>
[CH: fix return code for fctl != 0]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the HSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-7-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the CSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-6-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the XSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Simplify the error handling of the SSCH and RSCH handler avoiding
arbitrary and cryptic error codes being used to tell how the instruction
is supposed to end. Let the code detecting the condition tell how it's
to be handled in a less ambiguous way. It's best to handle SSCH and RSCH
in one go as the emulation of the two shares a lot of code.
For passthrough this change isn't pure refactoring, but changes the way
kernel reported EFAULT is handled. After clarifying the kernel interface
we decided that EFAULT shall be mapped to unit exception. Same goes for
unexpected error codes and absence of required ORB flags.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-4-pasic@linux.vnet.ibm.com>
Tested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
[CH: cosmetic changes]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CSS code needs to tell the IO instruction handlers located in ioinst.c
how the emulated instruction should be ended. Currently this is done by
returning generic (POSIX) error codes, and mapping them to outcomes like
condition codes. This makes bugs easy to create and hard to recognize.
As a preparation for moving away from (mis)using generic error codes for
flow control let us introduce a type which tells the instruction
handler function how to end the instruction, in a more straight-forward
and less ambiguous way.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-3-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
[CH: cosmetic changes]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The architecture supports masks of variable length for sclp write
event mask. We currently only support 4 byte event masks, as that
is what Linux uses.
Let's extend this to the maximum mask length supported by the
architecture and return 0 to the guest for the mask bits we don't
support in core.
Initial patch by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <1507729193-9747-1-git-send-email-jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let us convert the 3270 code so it uses the recently introduced
CcwDataStream abstraction instead of blindly assuming direct data access.
This patch does not change behavior beyond introducing IDA support: for
direct data access CCWs everything stays as-is. (If there are bugs, they
are also preserved).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170920172314.102710-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The architecture mandates the addresses to be accessed on the first
indirection level (that is, the data addresses without IDA, and the
(M)IDAW addresses with (M)IDA) to be checked against an CCW format
dependent limit maximum address. If a violation is detected, the storage
access is not to be performed and a channel program check needs to be
generated. As of today, we fail to do this check.
Let us stick even closer to the architecture specification.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a preparation for introducing handling for indirect data
addressing and modified indirect data addressing (CCW). Here we introduce
an interface which should make the addressing scheme transparent for the
client code. Here we implement only the basic scheme (no IDA or MIDA).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implemented in sclp.c, so let's move it to the right include file.
Also adjust some includes.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-9-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implemented in s390-virtio-ccw.c, so move it to the right header.
We can also drop the extern. Fix up one include.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's do it just like the other architectures. Introduce kvm-stub.c
for stubs and kvm_s390x.h for the declarations.
Change license to GPL2+ and keep copyright notice.
As we are dropping the sysemu/kvm.h include from cpu.h, fix up includes.
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we do not provide zpci, pci reconfiguration via sclp is not available
either. I/O adapter configuration, however, should always be present.
Rename the values that refer to I/O adapter configuration (instead of only
pci) to make things clearer.
Move length checking of the sccb for I/O adapter configuration into the
common sclp code (out of the pci code). This also fixes an issue that
the pci code would refer to a field in the sccb before checking whether
it was actually long enough.
Check for the adapter type in the sccb and return unrecognized adapter
type if the guest tries to issue I/O adapter configure/deconfigure for
a type other than pci or for pci if the zpci facility is not provided.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Some non-pci code calls into zpci code. Provide some stubs for builds
without pci.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
A successful completion of rchp should signal a solicited channel path
initialized CRW (channel report word), while the current implementation
always generates an un-solicited one. Let's fix this.
Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170803003527.86979-3-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's use a macro for the ERC (error recover code) when generating a
Channel Subsystem Event-information pending CRW (channel report word).
While we are at it, let's also add all other ERCs.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170803003527.86979-2-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=2bOV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging
s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170714: (40 commits)
s390x/gdb: add gs registers
s390x/arch_dump: also dump guarded storage control block
s390x/kvm: enable guarded storage
s390x/kvm: Enable KSS facility for nested virtualization
s390x/cpumodel: add esop/esop2 to z12 model
s390x/cpumodel: we are always in zarchitecture mode
s390x/cpumodel: wire up new hardware features
s390x/flic: migrate ais states
s390x/cpumodel: add zpci, aen and ais facilities
s390x: initialize cpu firstly
pc-bios/s390: rebuild s390-ccw.img
pc-bios/s390: add s390-netboot.img
pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
pc-bios/s390-ccw: Add virtio-net driver code
pc-bios/s390-ccw: Add core files for the network bootloading program
roms/SLOF: Update submodule to latest status
pc-bios/s390-ccw: Add code for virtio feature negotiation
pc-bios/s390-ccw: Remove unused structs from virtio.h
pc-bios/s390-ccw: Move byteswap functions to a separate header
pc-bios/s390-ccw: Add a write() function for stdio
...
Conflicts:
target/s390x/kvm.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce guarded storage support for KVM guests on s390.
We need to enable the capability, extend machine check validity,
sigp store-additional-status-at-address, and migration.
The feature is fenced for older machine type versions.
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some new guest features have been introduced recently. Let's wire
them up in the CPU model.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split patch]
During migration we should transfer ais states to the target guest.
This patch introduces a subsection to kvm_s390_flic_vmstate and new
vmsd for qemu_flic. The ais states need to be migrated only when
ais is supported.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Instead of passing around a pointer to ORB let us simplify some
function signatures by using the previously introduced ORB saved at the
subchannel (SubchDev).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-7-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Turn on migration for the channel subsystem for the next machine. For
legacy machines we still have to do things the old way.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-6-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Since we are going to need a migration compatibility breaking change to
activate ChannelSubSys migration let us use the opportunity to introduce
ORB to the SubchDev before that (otherwise we would need separate
handling e.g. a compat property).
The ORB will be useful for implementing IDA, or async handling of
subchannel work.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-5-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently the migration of the channel subsystem (css) is only partial
and is done by the virtio ccw proxies -- the only migratable css devices
existing at the moment.
With the current work on emulated and passthrough devices we need to
decouple the migration of the channel subsystem state from virtio ccw,
and have a separate section for it. A new section however necessarily
breaks the migration compatibility.
So let us introduce a switch at the machine class, and put it in 'off'
state for now. We will turn the switch 'on' for future machines once all
preparations are met. For compatibility machines the switch will stay
'off'.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's use the new inject_airq callback of flic to inject adapter
interrupts. For kvm case, if the kernel flic doesn't support the new
interface, the irq routine remains unchanged. For non-kvm case,
qemu-flic handles the suppression process.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently, we do nothing for the SIC instruction, but we need to
implement it properly. Let's add proper handling in the backend code.
Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's introduce a specialized way to inject adapter interrupts that,
unlike the common interrupt injection method, allows to take the
characteristics of the adapter into account.
For adapters subject to AIS facility:
- for non-kvm case, we handle the suppression for a given ISC in QEMU.
- for kvm case, we pass adapter id to kvm to do airq injection.
Add add tracepoint for suppressed airq and suppressing airq.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In order to emulate the adapter interruption suppression (AIS)
facility properly, the guest needs to be able to modify the AIS mask.
Interrupt suppression will be handled via the flic (for kvm, via a
recently introduced kernel backend; for !kvm, in the flic code), so
let's introduce a method to change the mode via the flic interface.
We introduce the 'simm' and 'nimm' fields to QEMUS390FLICState
to store interruption modes for each ISC. Each bit in 'simm' and
'nimm' targets one ISC, and collaboratively indicate three modes:
ALL-Interruptions, SINGLE-Interruption and NO-Interruptions. This
interface can initiate most transitions between the states; transition
from SINGLE-Interruption to NO-Interruptions via adapter interrupt
injection will be introduced in a following patch. The meaningful
combinations are as follows:
interruption mode | simm bit | nimm bit
------------------|----------|----------
ALL | 0 | 0
SINGLE | 1 | 0
NO | 1 | 1
Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce a new 'flags' field to IoAdapter to contain further
characteristics of the adapter, like whether the adapter is subject to
adapter-interruption suppression.
For the kvm case, pass this value in the 'flags' field when
registering an adapter.
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add an "info" monitor command to non-destructively inspect the state of
the storage attributes of the guest, and a normal command to toggle
migration mode (useful for debugging).
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Storage attributes device, like we have for storage keys.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The remaining non-const ones are in e1000e which modifies description at
runtime. They can be addressed separatedly.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-6-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's vmstatify virtio_ccw_save_config and virtio_ccw_load_config for
flexibility (extending using subsections) and for fun.
To achieve this we need to hack the config_vector, which is VirtIODevice
(that is common virtio) state, in the middle of the VirtioCcwDevice state
representation. This is somewhat ugly, but we have no choice because the
stream format needs to be preserved.
Almost no changes in behavior. Exception is everything that comes with
vmstate like extra bookkeeping about what's in the stream, and maybe some
extra checks and better error reporting.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170703213414.94298-1-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
MIDA (modified indirect data addressing) is an optional facility, and
we (currently) don't support it. Let's post an operand exception if
the guest tries to set it in the orb and a channel program check
if it is set in a ccw, as specified in the Principles of Operation.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Implement a basic infrastructure of handling channel I/O instruction
interception for passed through subchannels:
1. Branch the code path of instruction interception handling by
SubChannel type.
2. For a passed-through subchannel, issue the ORB to kernel to do ccw
translation and perform an I/O operation.
3. Assign different condition code based on the I/O result, or
trigger a program check.
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-12-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce a new callback on subchannel to handle ccw-request.
Realize the callback in vfio-ccw device. Besides, resort to
the event notifier handler to handling the ccw-request results.
1. Pread the I/O results via MMIO region.
2. Update the scsw info to guest.
3. Inject an I/O interrupt to notify guest the I/O result.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-11-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In order to support subchannels pass-through, we introduce a s390
subchannel device called "s390-ccw" to hold the real subchannel info.
The s390-ccw devices inherit from the abstract CcwDevice which connect
to the existing virtual-css-bus.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-7-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The S390 virtual css support already has a mechanism to create a
virtual subchannel and provide it to the guest. However, to
pass-through subchannels to a guest, we need to introduce a new
mechanism to create the subchannel according to the real device
information. Thus we reconstruct css_create_virtual_sch to a new
css_create_sch function to handle all these cases and do allocation
and initialization of the subchannel according to the device type
and machine configuration.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-6-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The S390 virtual css support already has a mechanism to build a
virtual subchannel information block (schib) and provide virtual
subchannels to the guest. However, to pass-through subchannels to
a guest, we need to introduce a new mechanism to build its schib
according to the real device information. Thus we realize a new css
sch_build_schib function to extract the path_masks, chpids, chpid
type from sysfs. To reuse the existing code, we refactor
css_add_virtual_chpid to css_add_chpid.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-5-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We want to support real (i.e. not virtual) channel devices
even for guests that do not support MCSS-E (where guests may
see devices from any channel subsystem image at once). As all
virtio-ccw devices are in css 0xfe (and show up in the default
css 0 for guests not activating MCSS-E), we need an option to
squash both the virtio subchannels and e.g. passed-through
subchannels from their real css (0-3, or 0 for hosts not
activating MCSS-E) into the default css. This will be
exploited in a later patch.
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170517004813.58227-4-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
devices via tn3270. Actual handling of the data stream is
delegated to x3270; more info at http://wiki.qemu.org/Features/3270
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kMb4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'cohuck/tags/s390x-3270-20170504' into staging
Basic support for using channel-attached 3270 'green-screen'
devices via tn3270. Actual handling of the data stream is
delegated to x3270; more info at http://wiki.qemu.org/Features/3270
# gpg: Signature made Thu 04 May 2017 11:36:51 AM BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* cohuck/tags/s390x-3270-20170504:
s390x/3270: Mark non-migratable and enable the device
s390x/3270: Detect for continued presence of a 3270 client
s390x/3270: Add the TCP socket events handler for 3270
s390x/3270: 3270 data stream handling
s390x/3270: Add emulated terminal3270 device
s390x/3270: Add abstract emulated ccw-attached 3270 device
s390x/css: Add an algorithm to find a free chpid
chardev: Basic support for TN3270
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This introduces the input and output handlers for 3270 device, setting
up the data tunnel among guest kernel, qemu and the 3270 client.
After the client connected and TN3270 handshake done, signal the not-ready
to ready status by an unsolicited device-end interrupt, and then the 3270
data stream could be handled correctly between the channel and socket.
Multiple commands generated by "Reset" key on x3270 are not supported now,
just simply terminate the connection.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This introduces the infrastructure for the emulated 3270
devices, which will be attached to the virtual-css-bus.
Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com>
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This introduces a function named css_find_free_chpid() to find a
free channel path. Because virtio-ccw device used zero as its
channel path number, it would be sensible to skip the reserved one
and search upwards.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In order to specify the LOADPARM value one may now add ",loadparm=xxx"
parameter to the "-machine s390-ccw-virtio" option.
The property setter will normalize and check the value provided much
like the way the HMC does.
The value is stored, but not used at the moment.
Initial patch from Eugene (jno) Dvurechenski.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The I/O adapters should exist as soon as the bus/infrastructure
exists, and not only when the guest is actually trying to do something
with them. While the lazy allocation was not wrong, allocating at init
time is cleaner, both for the architecture and the code. Let's adjust
this by having each device type (currently for PCI and virtio-ccw)
register the adapters for each ISC (as now we don't know which ISC the
guest will use) as soon as it initializes.
Use a two-dimensional array io_adapters[type][isc] to store adapters
in ChannelSubSys, so that we can conveniently get the adapter id by
the helper function css_get_adapter_id(type, isc).
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's use an enum for io adapter type, and standardize its naming to
CSS_IO_ADAPTER_* by changing S390_PCIPT_ADAPTER to CSS_IO_ADAPTER_PCI.
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's introduce a read-only property type that handles device ids of the
CssDevId type used for channel devices for future use. e.g. exposing the
busid of an I/O subchannel that is assigned to a ccw device.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The maximal number of virtqueues per device can be limited on a per
transport basis. For virtio-ccw this limit is defined by
VIRTIO_CCW_QUEUE_MAX, however the limitation used to come form the
number of adapter routes supported by flic (via notifiers).
Recently the limitation of the flic was adjusted so that it can
accommodate VIRTIO_QUEUE_MAX queues, and is in the meanwhile checked for
separately too.
Let us remove the transport specific limitation of virtio-ccw by
dropping VIRTIO_CCW_QUEUE_MAX and using VIRTIO_QUEUE_MAX instead.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's increase ADAPTER_ROUTES_MAX_GSI to VIRTIO_QUEUE_MAX which is the
largest demand foreseeable at the moment. Let us add a compatibility
macro for the previous machines so client code can maintain backwards
migration compatibility
To not mess up migration compatibility for virtio-ccw
VIRTIO_CCW_QUEUE_MAX is left at it's current value, and will be dropped
when virtio-ccw is converted to use the capability of the flic
introduced by this patch.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To make virtio-ccw supports more that 64 virtqueues we will have to
increase ADAPTER_ROUTES_MAX_GSI which is currently limiting the number if
possible adapter routes. Of course increasing the number of supported
routes can break backwards migration.
Let us introduce a compatibility property adapter_routes_max_batch so
client code can use the some old limit if in compatibility mode and
retain the migration compatibility.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
cpu model was merged with 2.8, it is wrong to abuse ri_allowed which
was enabled with 2.7.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The mha is provided in the CPU model, so get any CPU and extract the value.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-18-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If we have a lowest ibc, we can indicate the ibc to the guest.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-17-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The sclp "read cpu info" and "read scp info" commands can include
features for the cpu info and configuration characteristics (extended),
decribing some advanced features available in the configuration.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-15-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The cssid 255 is reserved but still valid from an architectural
point of view. However, feeding a bogus schid of 0xffffffff into
the virtio hypercall will lead to a crash:
Stack trace of thread 138363:
#0 0x00000000100d168c css_find_subch (qemu-system-s390x)
#1 0x00000000100d3290 virtio_ccw_hcall_notify
#2 0x00000000100cbf60 s390_virtio_hypercall
#3 0x000000001010ff7a handle_hypercall
#4 0x0000000010079ed4 kvm_cpu_exec (qemu-system-s390x)
#5 0x00000000100609b4 qemu_kvm_cpu_thread_fn
#6 0x000003ff8b887bb4 start_thread (libpthread.so.0)
#7 0x000003ff8b78df0a thread_start (libc.so.6)
This is because the css array was only allocated for 0..254
instead of 0..255.
Let's fix this by bumping MAX_CSSID to 255 and fencing off the
reserved cssid of 255 during css image allocation.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We need to implement the get_dev_path method for the css bus, or
else we might end up with two different devices having the same
qdev_path.
This was noticed when adding two scsi_hd controllers: The SCSIBus
code will produce a non-unique dev_path for vmstate usage if the
parent bus does not provide the get_dev_path method.
We simply use the device's bus id, as this is unique and we won't
have any deeper hierarchy from a channel subsystem perspective
anyway.
Note that we need to disable this for older machine versions,
as this changes the migration format.
Reported-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Header guard symbols should match their file name to make guard
collisions less likely. Offenders found with
scripts/clean-header-guards.pl -vn.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Current code uses some fields combinatorially to indicate the state of
a s390 pci device. This patch introduces device states in order to make
the code more readable and more logical.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently, common base layers virtual css bridge and bus are
defined in hw/s390x/virtio-ccw.c(h). In order to support
multiple types of devices in the virtual channel subsystem,
especially non virtio-ccw, refactoring work needs to be done.
This work is just a pure code move without any functional change
except dropping an empty function virtual_css_bridge_init() and
virtio_ccw_busdev_unplug() changing. virtio_ccw_busdev_unplug()
is specific to virtio-ccw but gets referenced from the common
virtual css bridge code. To keep the functional changes to a
minimum we export this function from virtio-ccw.c and continue
to reference it inside virtual_css_bridge_class_init()
(now living in hw/s390x/css-bridge.c). A follow-up patch will
clean this up.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
A lot of what virtio_ccw_device_realize() does isn't specific to
virtio; it would apply to emulated CCW as well. Factor it out to make
it easier to implement emulated CCW devices later on.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's introduce a CssDevId to handle device ids of the xx.x.xxxx
type used for channel devices. This has some benefits:
- We can use them in virtio-ccw and split the validity checks for
a channel device id in general from the constraint checking
within the virtio-ccw scope.
- We can reuse the device id type for future non-virtio channel
devices.
While we're at it, improve the validity checks and disallow e.g.
trailing characters.
Suggested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
According to the platform specification, under certain conditions,
pending IO interruptions have to be cleared. Let's add an interface
for that.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Move cpu_inject_* to the only C file where they are used.
Move ioinst.h declarations that need S390CPU to cpu.h, to make
ioinst.h independent of cpu.h.
Move channel declarations that only need SubchDev from cpu.h
to css.h, to make more channel users independent of cpu.h.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce run-time-instrumentation support when running under kvm for
virtio-ccw 2.7 machine and make sure older machines can not enable it.
The new ri_allowed field in the s390MachineClass serves as an indicator
whether the feature can be used by the machine and should therefore be
activated if available.
riccb_needed() is used to check whether riccb is needed or not in live
migration.
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
As we now have the new machine definitions, that let us disable/enable
machine options more easily, we need a way to save them and make them
publicly available.
The new s390-virtio-ccw.h header exports the s390 ccw machine state
and class, so they can be easily used in other C files.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's calculate it once and reuse it.
Suggested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's make that function a method of the new sclp device, keeping
the wrapper for existing users.
We can now let go of get_event_facility().
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's move the sclp_execute related functions into the SCLP class
and pass the device state as parameter, so we have easy access to
the SCLPDevice later on.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's create a root sclp device, which has other sclp devices as
children (e.g. the event facility for now) and can later be used
for migration of sclp specific attributes and setup of memory.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce TYPE_SCLP_QUIESCE and make use of it. Also use
TYPE_SCLP_CPU_HOTPLUG where applicable.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The current code only works by chance. The event facility is a sysbus
device, but specifies in its class structure as parent the DeviceClass
(instead of a device class).
The init function in return lies therefore at the same position as
the init function of SysBusDeviceClass and gets triggered instead -
a very bad idea of doing that (e.g. the parameter types don't match).
Let's bring the initialization code up to date, initializing the event
facility + child events in .instance_init and moving the realization of
the child events out of the init call, into the realization step.
Device realization is now automatically performed when the event facility
itself is realized. That realization implicitly triggers realization of
the child bus, which in turn initializes the events.
Please note that we have to manually propagate the realization of the bus
children, common code still has a TODO set for that task.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
For read event mask, we assumed that the layout of the sccb was
|sccb header|event buffer header|receive mask|...|
The correct layout, however, is
|sccb header|receive mask|...|
as in-buffer and
|sccb header|event buffer header|...|
as out-buffer.
Fix this: This makes selective read work.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This code disables storage key migration when an older machine type is
specified.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Provide an info skeys hmp sub-command to allow the end user to dump a storage
key for a given address. This is useful for guest operating system developers.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add dump-skeys command to the human monitor.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
A new QOM style device is provided to back guest storage keys. A special
version for KVM is created, which handles the storage key access via
KVM_S390_GET_SKEYS and KVM_S390_SET_SKEYS ioctl.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements a pci bus for s390x together with infrastructure
to generate and handle hotplug events, to configure/unconfigure via
sclp instruction, to do iommu translations and provide s390 support for
MSI/MSI-X notification processing.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's get rid of these duplicate defines.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add sclpMemoryHotplugDev to contain associated data structures, etc.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Make use of the new s390 adapter irq routing support to enable real
in-kernel irqfds for virtio-ccw with adapter interrupts.
Note that s390 doesn't provide the common KVM_CAP_IRQCHIP capability, but
rather needs KVM_CAP_S390_IRQCHIP to be enabled. This is to ensure backward
compatibility.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
