Commit Graph

672 Commits

Author SHA1 Message Date
Christian Schoenebeck
3887702e5f configure: make clear that VirtFS is 9p
Add '9P' to the summary output section of 'VirtFS' to avoid being
confused with virtiofs.

Based-on: <20230503130757.863824-1-pefoley@google.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <E1px7Id-0000NE-OQ@lizzy.crudebyte.com>
2023-05-16 16:21:54 +02:00
Peter Foley
1a67e07fe9 Don't require libcap-ng for virtfs support
It's only required for the proxy helper.

Add a new option for the proxy helper rather than enabling it
implicitly.

Change-Id: I95b73fca625529e99d16b0a64e01c65c0c1d43f2
Signed-off-by: Peter Foley <pefoley@google.com>
Message-Id: <20230503130757.863824-1-pefoley@google.com>
[C.S.: - Resolve merge conflict. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2023-05-16 16:21:04 +02:00
Sam Li
6d43eaa396 block/block-backend: add block layer APIs resembling Linux ZonedBlockDevice ioctls
Add zoned device option to host_device BlockDriver. It will be presented only
for zoned host block devices. By adding zone management operations to the
host_block_device BlockDriver, users can use the new block layer APIs
including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).

Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).

For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"

Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-4-faithilikerun@gmail.com
Message-id: 20230324090605.28361-4-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and remove spurious ret = -errno in
raw_co_zone_mgmt().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-05-15 08:17:03 -04:00
Richard Henderson
f779026478 disas: Move disas.c to disas/
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-80-richard.henderson@linaro.org>
2023-05-11 09:49:25 +01:00
Richard Henderson
caa9cbd566 Block layer patches
- Graph locking, part 3 (more block drivers)
 - Compile out assert_bdrv_graph_readable() by default
 - Add configure options for vmdk, vhdx and vpc
 - Fix use after free in blockdev_mark_auto_del()
 - migration: Attempt disk reactivation in more failure scenarios
 - Coroutine correctness fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRbi6ERHGt3b2xmQHJl
 ZGhhdC5jb20ACgkQfwmycsiPL9Y66A//ZRk/0M6EZUJPAKG6m/XLTDNrOCNBZ1Tu
 kBGvxXsVQZMt4gGpBad4l2INN6IQKTIdIf+lK71EpxMPmFG6xK32btn38yywCAfQ
 lr1p5nR0Y/zSlT+XzP4yKy/CtQl6U0rkysmjCIk35bZc7uLy6eo4oFR4vmhRRt2M
 UGltB50/Nicx12YFufVjodbhv+apxTGwS2XHatmwqtjKeYReSz8mJHslEy6DvC8m
 ziNThD6YBy7hMktAhNaqUqtZD0OSWz66VMObco/4i2++sOAMZIspXQkjv3AjH74e
 lmgMhNc/xgJKPwFBPsj6F7dOKxwhdKD9jzZlx3yaBtAU18hpWX54QWuA3/CFlySc
 5QbbqIstFTC8lqoRWThQrcHHRKbDBJCP4ImRXUIKhuPaxEzXA9zb3+f3QPTIjLSA
 KO7nxuSmO+tC7hQ1K9kAjRZHWlxxAk4clk+7UrK4UrWgGxfCUKgFg4Tyx7RrpwA6
 j4L5vwAY60LW74tikWe9xJx2QbdRoWBTTZhUyirbO7rLX1e8mS1nUWmtIsFSQxAq
 Z7nX7ygN0WEF+8qIsk3jTGaEeJoCM7+7B+X2RpSy0sftFjFYmybIiUgLMO7e+ozK
 rvUPnwlHAbGCVIJOKrUDj3cGt6k3/xnrTajUc7pCB3KKqG4pe+IlZuHyKIUMActb
 dBLaBnj0M2o=
 =hw9E
 -----END PGP SIGNATURE-----

Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging

Block layer patches

- Graph locking, part 3 (more block drivers)
- Compile out assert_bdrv_graph_readable() by default
- Add configure options for vmdk, vhdx and vpc
- Fix use after free in blockdev_mark_auto_del()
- migration: Attempt disk reactivation in more failure scenarios
- Coroutine correctness fixes

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRbi6ERHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Y66A//ZRk/0M6EZUJPAKG6m/XLTDNrOCNBZ1Tu
# kBGvxXsVQZMt4gGpBad4l2INN6IQKTIdIf+lK71EpxMPmFG6xK32btn38yywCAfQ
# lr1p5nR0Y/zSlT+XzP4yKy/CtQl6U0rkysmjCIk35bZc7uLy6eo4oFR4vmhRRt2M
# UGltB50/Nicx12YFufVjodbhv+apxTGwS2XHatmwqtjKeYReSz8mJHslEy6DvC8m
# ziNThD6YBy7hMktAhNaqUqtZD0OSWz66VMObco/4i2++sOAMZIspXQkjv3AjH74e
# lmgMhNc/xgJKPwFBPsj6F7dOKxwhdKD9jzZlx3yaBtAU18hpWX54QWuA3/CFlySc
# 5QbbqIstFTC8lqoRWThQrcHHRKbDBJCP4ImRXUIKhuPaxEzXA9zb3+f3QPTIjLSA
# KO7nxuSmO+tC7hQ1K9kAjRZHWlxxAk4clk+7UrK4UrWgGxfCUKgFg4Tyx7RrpwA6
# j4L5vwAY60LW74tikWe9xJx2QbdRoWBTTZhUyirbO7rLX1e8mS1nUWmtIsFSQxAq
# Z7nX7ygN0WEF+8qIsk3jTGaEeJoCM7+7B+X2RpSy0sftFjFYmybIiUgLMO7e+ozK
# rvUPnwlHAbGCVIJOKrUDj3cGt6k3/xnrTajUc7pCB3KKqG4pe+IlZuHyKIUMActb
# dBLaBnj0M2o=
# =hw9E
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 01:18:41 PM BST
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]

* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (28 commits)
  block: compile out assert_bdrv_graph_readable() by default
  block: Mark bdrv_refresh_limits() and callers GRAPH_RDLOCK
  block: Mark bdrv_recurse_can_replace() and callers GRAPH_RDLOCK
  block: Mark bdrv_query_block_graph_info() and callers GRAPH_RDLOCK
  block: Mark bdrv_query_bds_stats() and callers GRAPH_RDLOCK
  block: Mark BlockDriver callbacks for amend job GRAPH_RDLOCK
  block: Mark bdrv_co_debug_event() GRAPH_RDLOCK
  block: Mark bdrv_co_get_info() and callers GRAPH_RDLOCK
  block: Mark bdrv_co_get_allocated_file_size() and callers GRAPH_RDLOCK
  mirror: Require GRAPH_RDLOCK for accessing a node's parent list
  vhdx: Require GRAPH_RDLOCK for accessing a node's parent list
  nbd: Mark nbd_co_do_establish_connection() and callers GRAPH_RDLOCK
  nbd: Remove nbd_co_flush() wrapper function
  block: .bdrv_open is non-coroutine and unlocked
  graph-lock: Fix GRAPH_RDLOCK_GUARD*() to be reader lock
  graph-lock: Add GRAPH_UNLOCKED(_PTR)
  test-bdrv-drain: Don't modify the graph in coroutines
  iotests: Test resizing image attached to an iothread
  block: Don't call no_coroutine_fns in qmp_block_resize()
  block: bdrv/blk_co_unref() for calls in coroutine context
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-10 14:52:03 +01:00
Stefan Hajnoczi
58a2e3f5c3 block: compile out assert_bdrv_graph_readable() by default
reader_count() is a performance bottleneck because the global
aio_context_list_lock mutex causes thread contention. Put this debugging
assertion behind a new ./configure --enable-debug-graph-lock option and
disable it by default.

The --enable-debug-graph-lock option is also enabled by the more general
--enable-debug option.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230501173443.153062-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-10 14:16:54 +02:00
Vladimir Sementsov-Ogievskiy
11cea42e17 block: add configure options for excluding vmdk, vhdx and vpc
Let's add --enable / --disable configure options for these formats,
so that those who don't need them may not build them.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230421092758.814122-1-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-05-10 14:15:13 +02:00
Richard Henderson
568992e344 QAPI patches patches for 2023-05-09
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRbUEYSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTmzEP/3pDpVxpP7xXLevl2vFqkFyHEjc0L3N4
 x//ljgQojAdM6WU3e0qqOfp/NE2ktUg5D3z+QNiVP1/xXv/dtMGATdG+X9AZs0US
 XnhdicYdBng8bGuhlNuNY8QJ/I4ALwUR44LVOYibVohv2RVYWBapGiHowpyTyABq
 sFSHrj/cgvTMUn53yp7veZTo6rWG6RU/D5uUTOMsvKeAoHoOXMyBxV01SCt84t/J
 pcelINcriP6cQVzgfm1B39UNa0IxinGxEx/IIaxz5Ju66G05HTs4CsBFAF6/0QI/
 3YerGWPt9fF6+qYNn21Gg9CL1fHHppNqTXkcuTeGn/Ohg53bosktti5Ysn73vtpR
 GWsJr6M4KQ1SwEbZIiFZCS3A4VTbRcr7WkXets39pcpxGDlNisi+zfV95kNo09xR
 hxi8SuWgb2OfQpVs/71eunp+PM1ZQsODurcy4x0/rlYJfhk53kQSMRtlfy5Cn6uY
 +weWUgygBSWG/w0qanWWK5TF1DNlRKzbix6cmMuGGKcpyF7EMWE1kqmjmmu7CQvM
 a3aPTqGtUt0LeqBQIhmeq/jEwd3vxQa1R85gd0/0sWxEMHkPXVfVoaryiaWAykye
 7r+c8o/41c44zs8YxdZrz72su9fqKC/TeVf5soU46ZucmH8D6f7QHy+s1ec2PEjY
 l6cRIXTXHeQe
 =j6cJ
 -----END PGP SIGNATURE-----

Merge tag 'pull-qapi-2023-05-09-v2' of https://repo.or.cz/qemu/armbru into staging

QAPI patches patches for 2023-05-09

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRbUEYSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTmzEP/3pDpVxpP7xXLevl2vFqkFyHEjc0L3N4
# x//ljgQojAdM6WU3e0qqOfp/NE2ktUg5D3z+QNiVP1/xXv/dtMGATdG+X9AZs0US
# XnhdicYdBng8bGuhlNuNY8QJ/I4ALwUR44LVOYibVohv2RVYWBapGiHowpyTyABq
# sFSHrj/cgvTMUn53yp7veZTo6rWG6RU/D5uUTOMsvKeAoHoOXMyBxV01SCt84t/J
# pcelINcriP6cQVzgfm1B39UNa0IxinGxEx/IIaxz5Ju66G05HTs4CsBFAF6/0QI/
# 3YerGWPt9fF6+qYNn21Gg9CL1fHHppNqTXkcuTeGn/Ohg53bosktti5Ysn73vtpR
# GWsJr6M4KQ1SwEbZIiFZCS3A4VTbRcr7WkXets39pcpxGDlNisi+zfV95kNo09xR
# hxi8SuWgb2OfQpVs/71eunp+PM1ZQsODurcy4x0/rlYJfhk53kQSMRtlfy5Cn6uY
# +weWUgygBSWG/w0qanWWK5TF1DNlRKzbix6cmMuGGKcpyF7EMWE1kqmjmmu7CQvM
# a3aPTqGtUt0LeqBQIhmeq/jEwd3vxQa1R85gd0/0sWxEMHkPXVfVoaryiaWAykye
# 7r+c8o/41c44zs8YxdZrz72su9fqKC/TeVf5soU46ZucmH8D6f7QHy+s1ec2PEjY
# l6cRIXTXHeQe
# =j6cJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 09:05:26 AM BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-qapi-2023-05-09-v2' of https://repo.or.cz/qemu/armbru:
  qapi: Reformat doc comments to conform to current conventions
  qga/qapi-schema: Reformat doc comments to conform to current conventions
  docs/devel/qapi-code-gen: Update doc comment conventions
  qapi: Section parameter @indent is no longer used, drop
  qapi: Relax doc string @name: description indentation rules
  qapi: Rewrite parsing of doc comment section symbols and tags
  qapi: Fix argument description indentation stripping
  tests/qapi-schema/doc-good: Improve argument description tests
  tests/qapi-schema/doc-good: Improve a comment
  qapi/dump: Indent bulleted lists consistently
  qapi: Tidy up a slightly awkward TODO comment
  sphinx/qapidoc: Do not emit TODO sections into user manuals
  Revert "qapi: BlockExportRemoveMode: move comments to TODO"
  meson: Fix to make QAPI generator output depend on main.py
  qapi: Fix crash on stray double quote character
  docs/devel/qapi-code-gen: Turn FIXME admonitions into comments
  docs/devel/qapi-code-gen: Clean up use of quotes a bit

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-10 13:11:29 +01:00
Markus Armbruster
88d357d292 meson: Fix to make QAPI generator output depend on main.py
@qapi_gen_depends is missing scripts/qapi/main.py.  Fix that, and drop
a duplicate scripts/qapi/common.py.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-5-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
2023-05-09 09:03:57 +02:00
Paolo Bonzini
ef709860ea meson: leave unnecessary modules out of the build
meson.build files choose whether to build modules based on foo.found()
expressions.  If a feature is enabled (e.g. --enable-gtk), these expressions
are true even if the code is not used by any emulator, and this results
in an unexpected difference between modular and non-modular builds.

For non-modular builds, the files are not included in any binary, and
therefore the source files are never processed.  For modular builds,
however, all .so files are unconditionally built by default, and therefore
a normal "make" tries to build them.  However, the corresponding trace-*.h
files are absent due to this conditional:

if have_system
  trace_events_subdirs += [
    ...
    'ui',
    ...
  ]
endif

which was added to avoid wasting time running tracetool on unused trace-events
files.  This causes a compilation failure; fix it by skipping module builds
entirely if (depending on the module directory) have_block or have_system
are false.

Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-08 19:04:52 +02:00
Dorinda Bassey
c2d3d1c294 audio/pwaudio.c: Add Pipewire audio backend for QEMU
This commit adds a new audiodev backend to allow QEMU to use Pipewire as
both an audio sink and source. This backend is available on most systems

Add Pipewire entry points for QEMU Pipewire audio backend
Add wrappers for QEMU Pipewire audio backend in qpw_pcm_ops()
qpw_write function returns the current state of the stream to pwaudio
and Writes some data to the server for playback streams using pipewire
spa_ringbuffer implementation.
qpw_read function returns the current state of the stream to pwaudio and
reads some data from the server for capture streams using pipewire
spa_ringbuffer implementation. These functions qpw_write and qpw_read
are called during playback and capture.
Added some functions that convert pw audio formats to QEMU audio format
and vice versa which would be needed in the pipewire audio sink and
source functions qpw_init_in() & qpw_init_out().
These methods that implement playback and recording will create streams
for playback and capture that will start processing and will result in
the on_process callbacks to be called.
Built a connection to the Pipewire sound system server in the
qpw_audio_init() method.

Signed-off-by: Dorinda Bassey <dbassey@redhat.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417105654.32328-1-dbassey@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2023-05-05 13:23:08 +04:00
Richard Henderson
dc165fcd4e migration/xbzrle: Use __attribute__((target)) for avx512
Use the attribute, which is supported by clang, instead of
the #pragma, which is not supported and, for some reason,
also not detected by the meson probe, so we fail by -Werror.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230501210555.289806-1-richard.henderson@linaro.org>
2023-05-02 13:05:45 -07:00
Emilio Cota
e3feb2cc22 util: import GTree as QTree
The only reason to add this implementation is to control the memory allocator
used. Some users (e.g. TCG) cannot work reliably in multi-threaded
environments (e.g. forking in user-mode) with GTree's allocator, GSlice.
See https://gitlab.com/qemu-project/qemu/-/issues/285 for details.

Importing GTree is a temporary workaround until GTree migrates away
from GSlice.

This implementation is identical to that in glib v2.75.0, except that
we don't import recent additions to the API nor deprecated API calls,
none of which are used in QEMU.

I've imported tests from glib and added a benchmark just to
make sure that performance is similar. Note: it cannot be identical
because (1) we are not using GSlice, (2) we use different compilation flags
(e.g. -fPIC) and (3) we're linking statically.

$ cat /proc/cpuinfo| grep 'model name' | head -1
model name      : AMD Ryzen 7 PRO 5850U with Radeon Graphics
$ echo '0' | sudo tee /sys/devices/system/cpu/cpufreq/boost
$ tests/bench/qtree-bench

 Tree         Op      32            1024            4096          131072         1048576
------------------------------------------------------------------------------------------------
GTree     Lookup   83.23           43.08           25.31           19.40           16.22
QTree     Lookup  113.42 (1.36x)   53.83 (1.25x)   28.38 (1.12x)   17.64 (0.91x)   13.04 (0.80x)
GTree     Insert   44.23           29.37           25.83           19.49           17.03
QTree     Insert   46.87 (1.06x)   25.62 (0.87x)   24.29 (0.94x)   16.83 (0.86x)   12.97 (0.76x)
GTree     Remove   53.27           35.15           31.43           24.64           16.70
QTree     Remove   57.32 (1.08x)   41.76 (1.19x)   38.37 (1.22x)   29.30 (1.19x)   15.07 (0.90x)
GTree  RemoveAll  135.44          127.52          126.72          120.11           64.34
QTree  RemoveAll  127.15 (0.94x)  110.37 (0.87x)  107.97 (0.85x)   97.13 (0.81x)   55.10 (0.86x)
GTree   Traverse  277.71          276.09          272.78          246.72           98.47
QTree   Traverse  370.33 (1.33x)  411.97 (1.49x)  400.23 (1.47x)  262.82 (1.07x)   78.52 (0.80x)
------------------------------------------------------------------------------------------------

As a sanity check, the same benchmark when Glib's version
is >= $glib_dropped_gslice_version (i.e. QTree == GTree):

 Tree         Op      32            1024            4096          131072         1048576
------------------------------------------------------------------------------------------------
GTree     Lookup   82.72           43.09           24.18           19.73           16.09
QTree     Lookup   81.82 (0.99x)   43.10 (1.00x)   24.20 (1.00x)   19.76 (1.00x)   16.26 (1.01x)
GTree     Insert   45.07           29.62           26.34           19.90           17.18
QTree     Insert   45.72 (1.01x)   29.60 (1.00x)   26.38 (1.00x)   19.71 (0.99x)   17.20 (1.00x)
GTree     Remove   54.48           35.36           31.77           24.97           16.95
QTree     Remove   54.46 (1.00x)   35.32 (1.00x)   31.77 (1.00x)   24.91 (1.00x)   17.15 (1.01x)
GTree  RemoveAll  140.68          127.36          125.43          121.45           68.20
QTree  RemoveAll  140.65 (1.00x)  127.64 (1.00x)  125.01 (1.00x)  121.73 (1.00x)   67.06 (0.98x)
GTree   Traverse  278.68          276.05          266.75          251.65          104.93
QTree   Traverse  278.31 (1.00x)  275.78 (1.00x)  266.42 (1.00x)  247.89 (0.99x)  104.58 (1.00x)
------------------------------------------------------------------------------------------------

Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230205163758.416992-2-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-28 15:23:10 -07:00
Marc-André Lureau
84a0a2ef0a ui/dbus: do not require opengl & gbm
Allow to build & use the DBus display without 3d/GPU acceleration support.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2023-03-13 23:48:45 +04:00
Richard Henderson
29c87a281e tracing: remove transform.py
This file, and a couple of uses, got left behind when the
tcg stuff was removed from tracetool.

Fixes: 126d4123c5 ("tracing: excise the tcg related from tracetool")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-03-05 13:44:08 -08:00
David Woodhouse
aa98ee38a5 hw/xen: Implement emulated PIRQ hypercall support
This wires up the basic infrastructure but the actual interrupts aren't
there yet, so don't advertise it to the guest.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-01 09:09:01 +00:00
David Woodhouse
820c1aba51 xen: add CONFIG_XEN_BUS and CONFIG_XEN_EMU options for Xen emulation
The XEN_EMU option will cover core Xen support in target/, which exists
only for x86 with KVM today but could theoretically also be implemented
on Arm/Aarch64 and with TCG or other accelerators (if anyone wants to
run the gauntlet of struct layout compatibility, errno mapping, and the
rest of that fui).

It will also cover the support for architecture-independent grant table
and event channel support which will be added in hw/i386/kvm/ (on the
basis that the non-KVM support is very theoretical and making it not use
KVM directly seems like gratuitous overengineering at this point).

The XEN_BUS option is for the xenfv platform support, which will now be
used both by XEN_EMU and by real Xen.

The XEN option remains dependent on the Xen runtime libraries, and covers
support for real Xen. Some code which currently resides under CONFIG_XEN
will be moving to CONFIG_XEN_BUS over time as the direct dependencies on
Xen runtime libraries are eliminated. The Xen PCI platform device will
also reside under CONFIG_XEN_BUS.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-01 08:22:49 +00:00
Philippe Mathieu-Daudé
31ffa2aa3c cpu: Remove capstone meson dependency
Only disas.c requires capstone CFLAGS, not cpu.c.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221130135241.85060-2-philmd@linaro.org>
2023-02-27 22:28:54 +01:00
Peter Maydell
3f21065f09 * x86 bugfixes
* OpenBSD support for naming threads
 * Refined Python support policy
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP0wtkUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNI6QgAjMvEV0N5FZYMpiuQdjebBeV+uHM6
 LThewCQa0cW5jb1X1NFBbOxYlNfE3WQeZqQF+BiVJr5wT2UsyNsPH7wTjsP387vV
 juoD7D/XZo8P4Qi+vJWo8XVBrzWEK8QS1P+NxWr+ZnsAhDx2+MR87fVmHtVBW1pI
 oDO0iyRrvVtaTAIVyNWSgZ59SLMmcH/6L4aYv5nrKYuAWx7fTneGGheKuqk55RsV
 sMv+fHolmmwKVm8tMFksw0atPwL7ZmSm1uObNHCQKdDNSoakC7YpaXa3y8LEzU7I
 B4h/PsmRpN33ggvsiuzFp9kfEHMy4QazfpoVFFqTLalhTr+XuiNTxj8xdA==
 =6eNN
 -----END PGP SIGNATURE-----

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* x86 bugfixes
* OpenBSD support for naming threads
* Refined Python support policy

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP0wtkUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNI6QgAjMvEV0N5FZYMpiuQdjebBeV+uHM6
# LThewCQa0cW5jb1X1NFBbOxYlNfE3WQeZqQF+BiVJr5wT2UsyNsPH7wTjsP387vV
# juoD7D/XZo8P4Qi+vJWo8XVBrzWEK8QS1P+NxWr+ZnsAhDx2+MR87fVmHtVBW1pI
# oDO0iyRrvVtaTAIVyNWSgZ59SLMmcH/6L4aYv5nrKYuAWx7fTneGGheKuqk55RsV
# sMv+fHolmmwKVm8tMFksw0atPwL7ZmSm1uObNHCQKdDNSoakC7YpaXa3y8LEzU7I
# B4h/PsmRpN33ggvsiuzFp9kfEHMy4QazfpoVFFqTLalhTr+XuiNTxj8xdA==
# =6eNN
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 21 Feb 2023 13:10:49 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
  target/i386/gdbstub: Fix a bug about order of FPU stack in 'g' packets.
  docs: build-platforms: refine requirements on Python build dependencies
  thread-posix: add support for setting threads name on OpenBSD
  target/i386: Fix 32-bit AD[CO]X insns in 64-bit mode

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-24 12:46:59 +00:00
Pierrick Bouvier
dbd672c87f sysemu/os-win32: fix setjmp/longjmp on windows-arm64
Windows implementation of setjmp/longjmp is done in
C:/WINDOWS/system32/ucrtbase.dll. Alas, on arm64, it seems to *always*
perform stack unwinding, which crashes from generated code.

By using alternative implementation built in mingw, we avoid doing stack
unwinding and this fixes crash when calling longjmp.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221153006.20300-3-pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-02-21 13:45:48 -10:00
Peter Maydell
4919d0c44a Replace fork-based fuzzing with reboots.
Now the fuzzers will reboot the guest between inputs.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+tTiv4cTddY0BRfETmYd3lg6lk4FAmPu/LoACgkQTmYd3lg6
 lk6RHg/7BRGI5ZPXb1MmTNCC+SroQ6TT++lO4b0hbkN2HO6U+WVvfuA6+0wg+8qC
 4bp+G1Tabpcq1MTYUuim6DBtWswgpqr0AbWNwn1eF7hya+3W9woH2POVYY2wwc7m
 S3EdwXCCKo9gGXlaNrotnbwIk+o8B4BzXOXLIlRtg26wGYhT5fkJA/BQcHKDXz37
 ctyWxlyjIM8pNCgfybMvjC7MYtp8DufPsv/rrKx9t0TM7f1jPVgXLek7t0+ZwjeY
 qz2Om2jiij1INgK9hTieWs4eHwpwre6vH2a+JKRkZ3sS7WYcj1auNKVJb3GvDqmc
 wy+Nz5Lz4+aPP19pkCYjfz5w3CqEEsSlSDn5UVRbfl2fbENSceoNwo9huMXsF1pB
 oO6NK2NxbOygmNpYxp+JEt45KFIXzUcIFQwbn8aCDODIl+0H2yu7/ll6XgELf1Pa
 P83THOaVxIxfcI9VOdt/FwDq1ZzmV5nk/BkIGJeIWNYMbU4Gze6YoaL3U8AHDxKH
 f6f3qDzcVJjqD0wKhvYcQ3kSPq+vHc/ioh6mYwos6VUEVYz/SLOY876MaSB/K4PE
 ofBV7y6HvJ6AMwg1TBg4YtOP08gWK+4sYH+I09oU40U3UcwEpkbkQTF72lPQHxFs
 8UVRJrgWv/xzrwzXTX5ruQ633F8zuhqQTeERqksj1pPHJ3NdHps=
 =F6qI
 -----END PGP SIGNATURE-----

Merge tag 'pr-2023-02-16' of https://gitlab.com/a1xndr/qemu into staging

Replace fork-based fuzzing with reboots.
Now the fuzzers will reboot the guest between inputs.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE+tTiv4cTddY0BRfETmYd3lg6lk4FAmPu/LoACgkQTmYd3lg6
# lk6RHg/7BRGI5ZPXb1MmTNCC+SroQ6TT++lO4b0hbkN2HO6U+WVvfuA6+0wg+8qC
# 4bp+G1Tabpcq1MTYUuim6DBtWswgpqr0AbWNwn1eF7hya+3W9woH2POVYY2wwc7m
# S3EdwXCCKo9gGXlaNrotnbwIk+o8B4BzXOXLIlRtg26wGYhT5fkJA/BQcHKDXz37
# ctyWxlyjIM8pNCgfybMvjC7MYtp8DufPsv/rrKx9t0TM7f1jPVgXLek7t0+ZwjeY
# qz2Om2jiij1INgK9hTieWs4eHwpwre6vH2a+JKRkZ3sS7WYcj1auNKVJb3GvDqmc
# wy+Nz5Lz4+aPP19pkCYjfz5w3CqEEsSlSDn5UVRbfl2fbENSceoNwo9huMXsF1pB
# oO6NK2NxbOygmNpYxp+JEt45KFIXzUcIFQwbn8aCDODIl+0H2yu7/ll6XgELf1Pa
# P83THOaVxIxfcI9VOdt/FwDq1ZzmV5nk/BkIGJeIWNYMbU4Gze6YoaL3U8AHDxKH
# f6f3qDzcVJjqD0wKhvYcQ3kSPq+vHc/ioh6mYwos6VUEVYz/SLOY876MaSB/K4PE
# ofBV7y6HvJ6AMwg1TBg4YtOP08gWK+4sYH+I09oU40U3UcwEpkbkQTF72lPQHxFs
# 8UVRJrgWv/xzrwzXTX5ruQ633F8zuhqQTeERqksj1pPHJ3NdHps=
# =F6qI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Feb 2023 04:04:10 GMT
# gpg:                using RSA key FAD4E2BF871375D6340517C44E661DDE583A964E
# gpg: Good signature from "Alexander Bulekov <alxndr@bu.edu>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAD4 E2BF 8713 75D6 3405  17C4 4E66 1DDE 583A 964E

* tag 'pr-2023-02-16' of https://gitlab.com/a1xndr/qemu:
  docs/fuzz: remove mentions of fork-based fuzzing
  fuzz: remove fork-fuzzing scaffolding
  fuzz/i440fx: remove fork-based fuzzer
  fuzz/virtio-blk: remove fork-based fuzzer
  fuzz/virtio-net: remove fork-based fuzzer
  fuzz/virtio-scsi: remove fork-based fuzzer
  fuzz/generic-fuzz: add a limit on DMA bytes written
  fuzz/generic-fuzz: use reboots instead of forks to reset state
  fuzz: add fuzz_reset API
  hw/sparse-mem: clear memory on reset

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-21 11:28:01 +00:00
Brad Smith
3ada67a306 thread-posix: add support for setting threads name on OpenBSD
Make use of pthread_set_name_np() to be able to set the threads name
on OpenBSD.

Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <Y57NrCmPTVSXLWC4@humpty.home.comstyle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-02-17 09:56:34 +01:00
Alexander Bulekov
d2e6f9272d fuzz: remove fork-fuzzing scaffolding
Fork-fuzzing provides a few pros, but our implementation prevents us
from using fuzzers other than libFuzzer, and may be causing issues such
as coverage-failure builds on OSS-Fuzz. It is not a great long-term
solution as it depends on internal implementation details of libFuzzer
(which is no longer in active development). Remove it in favor of other
methods of resetting state between inputs.

Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
2023-02-16 23:02:46 -05:00
Dr. David Alan Gilbert
8ab5e8a503 virtiofsd: Remove build and docs glue
Remove all the virtiofsd build and docs infrastructure.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-02-16 18:15:08 +00:00
Alex Bennée
bb9ecae70b build: deprecate --enable-gprof builds and remove from CI
As gprof relies on instrumentation you rarely get useful data compared
to a real optimised build. Lets deprecate the build option and
simplify the CI configuration as a result.

Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1338
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230131094224.861621-1-alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-02-14 09:02:42 +01:00
Ilya Leoshkevich
550c6d97de meson: Disable libdw for static builds by default
Static QEMU build fails on Debian Bullseye:

    /usr/bin/ld: /usr/lib/x86_64-linux-gnu/libdw.a(debuginfod-client.o): in function `__libdwfl_debuginfod_init':
    (.text.startup+0x17): undefined reference to `dlopen'

The reason is that pkg-config does not suggest -ldl for libdw, and
adding --extra-ldflags="-ldl" resolves the issue. However, static
linking with libdw is an unclear topic:

* Linux perf does it.
* Debian's libdw-dev description says:

      Only link to the static version for special cases and when you
      don't need anything from the ebl backends.

* As the error message above indicates, -ldl is also needed for
  debuginfod support.

The functionality provided by libdw is needed for analyzing performance
of JITed code, which is mostly useful to developers and researchers.
Therefore, in order to avoid unpleasant surprises for people who don't
need this, simply disable libdw for static builds by default. It can
still be enabled explicitly if needed.

Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230210005208.438142-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-02-14 09:02:42 +01:00
Ilya Leoshkevich
bc71d58fd7 meson: Add missing libdw knobs
Add the missing meson infrastructure bits for the new libdw
dependency. Model them after the existing capstone knobs.

Fixes: 7c10cb38cc ("accel/tcg: Add debuginfo support")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230210005208.438142-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-02-14 09:02:42 +01:00
ling xu
04ffce137b AVX512 support for xbzrle_encode_buffer
This commit is the same with [PATCH v6 1/2], and provides avx512 support for xbzrle_encode_buffer
function to accelerate xbzrle encoding speed. Runtime check of avx512
support and benchmark for this feature are added. Compared with C
version of xbzrle_encode_buffer function, avx512 version can achieve
50%-70% performance improvement on benchmarking. In addition, if dirty
data is randomly located in 4K page, the avx512 version can achieve
almost 140% performance gain.

Signed-off-by: ling xu <ling1.xu@intel.com>
Co-authored-by: Zhou Zhao <zhou.zhao@intel.com>
Co-authored-by: Jun Jin <jun.i.jin@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2023-02-11 16:51:09 +01:00
Peter Maydell
ceabf6e500 linux-user branch pull request 20230204
Implement execveat()
 un-parent OBJECT(cpu) when closing thread
 Revert fix for glibc >= 2.36 sys/mount.h
 Fix/update strace
 move target_flat.h to target subdirs
 Fix SO_ERROR return code of getsockopt()
 Fix /proc/cpuinfo output for hppa
 Add emulation for MADV_WIPEONFORK and MADV_KEEPONFORK in madvise()
 Implement SOL_ALG encryption support
 linux-user: Allow sendmsg() without IOV
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmPeguUSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748tnQP/1A4eu33pLe4+tjBuDGt2zcGAVuz+wN9
 rcwN5BQgjILwfECfRsy9QIkC8+M496tLk4W7pNkW9x/GSpzBp9x0+066uUghsa1Q
 c0bFU0FM8xpywEXvOrz3LvEWaWqeBV/R+XYMqKFaiBQXf/5kmmteei9guH42L3gV
 a+d0s1cWT48TslTaga9ECbiPD9lK+yfW879+wRhex1/BetkJPzLU1hZB4vfC5YQo
 XagcmLWiseT4U8uCysikOgKQE4g2bv1oJXUuYjBxW15s5/llg8e57dEboO7MFEPK
 a9P3Hl1qiA5Ol3scF1I7WURmGP6UVfdhTYe1aKYHhKY7QVBVjbU7r/NkdQ3dR6Nv
 db58Lkurnrf5dMksZk8+25F/fvJT0nZpnbipunZejetNjrDVPk19XK5E6kJf91hk
 3W3vOeWMp4QjThpqghnlQ3gm2XfVmCGSMIOywTKZ4/M/TP28+9zY7GZqQXQXCBMy
 nJFahfVTCfiYaGAYGjlMe5CMOQ6tJ6lwxuTCl9O1X565ifMBNUj3rcte1FvO/i24
 Rk0/lQVO+tD9ImxHJrei0Y2C0xzo7V8kaB9+foAf6Ku91SY1X1FIOm81DEyAhK61
 Biv2zlNwUV0aCierrn3oLuDkviVaAg6FkLO9snPG+lQy2uxgyJJ2/Pv0OCZhniWI
 9WifjYZKAXDa
 =AcC6
 -----END PGP SIGNATURE-----

Merge tag 'linux-user-for-8.0-pull-request' of https://gitlab.com/laurent_vivier/qemu into staging

linux-user branch pull request 20230204

Implement execveat()
un-parent OBJECT(cpu) when closing thread
Revert fix for glibc >= 2.36 sys/mount.h
Fix/update strace
move target_flat.h to target subdirs
Fix SO_ERROR return code of getsockopt()
Fix /proc/cpuinfo output for hppa
Add emulation for MADV_WIPEONFORK and MADV_KEEPONFORK in madvise()
Implement SOL_ALG encryption support
linux-user: Allow sendmsg() without IOV

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmPeguUSHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L748tnQP/1A4eu33pLe4+tjBuDGt2zcGAVuz+wN9
# rcwN5BQgjILwfECfRsy9QIkC8+M496tLk4W7pNkW9x/GSpzBp9x0+066uUghsa1Q
# c0bFU0FM8xpywEXvOrz3LvEWaWqeBV/R+XYMqKFaiBQXf/5kmmteei9guH42L3gV
# a+d0s1cWT48TslTaga9ECbiPD9lK+yfW879+wRhex1/BetkJPzLU1hZB4vfC5YQo
# XagcmLWiseT4U8uCysikOgKQE4g2bv1oJXUuYjBxW15s5/llg8e57dEboO7MFEPK
# a9P3Hl1qiA5Ol3scF1I7WURmGP6UVfdhTYe1aKYHhKY7QVBVjbU7r/NkdQ3dR6Nv
# db58Lkurnrf5dMksZk8+25F/fvJT0nZpnbipunZejetNjrDVPk19XK5E6kJf91hk
# 3W3vOeWMp4QjThpqghnlQ3gm2XfVmCGSMIOywTKZ4/M/TP28+9zY7GZqQXQXCBMy
# nJFahfVTCfiYaGAYGjlMe5CMOQ6tJ6lwxuTCl9O1X565ifMBNUj3rcte1FvO/i24
# Rk0/lQVO+tD9ImxHJrei0Y2C0xzo7V8kaB9+foAf6Ku91SY1X1FIOm81DEyAhK61
# Biv2zlNwUV0aCierrn3oLuDkviVaAg6FkLO9snPG+lQy2uxgyJJ2/Pv0OCZhniWI
# 9WifjYZKAXDa
# =AcC6
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 04 Feb 2023 16:08:05 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* tag 'linux-user-for-8.0-pull-request' of https://gitlab.com/laurent_vivier/qemu: (22 commits)
  linux-user: Allow sendmsg() without IOV
  linux-user: Implement SOL_ALG encryption support
  linux-user: Enhance strace output for various syscalls
  linux-user: Show 4th argument of rt_sigprocmask() in strace
  linux-user: Add emulation for MADV_WIPEONFORK and MADV_KEEPONFORK in madvise()
  linux-user: Improve strace output of personality() and sysinfo()
  linux-user: Fix /proc/cpuinfo output for hppa
  linux-user: Fix SO_ERROR return code of getsockopt()
  linux-user: move target_flat.h to target subdirs
  linux-user: Improve strace output of getgroups() and setgroups()
  linux-user: Add strace output for clock_getres_time64() and futex_time64()
  Revert "linux-user: fix compat with glibc >= 2.36 sys/mount.h"
  Revert "linux-user: add more compat ioctl definitions"
  linux-user: add more netlink protocol constants
  linux-user: fix strace build w/out munlockall
  linux-user: un-parent OBJECT(cpu) when closing thread
  linux-user: Add missing MAP_HUGETLB and MAP_STACK flags in strace
  linux-user/syscall: Implement execveat()
  linux-user/syscall: Extract do_execve() from do_syscall1()
  linux-user/strace: Add output for execveat() syscall
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-04 17:17:15 +00:00
Peter Maydell
579510e196 Monitor patches for 2023-02-03
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPeAkgSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTUagP/iZ24jXaWoFOKaO70wdQ/tdoQObWZnUV
 8xJNJYmYYbWoiq9wQXHebi/yEgBudso1lLzAnp8lsF12ybnNV1zsjyV/yumEKSNW
 3nL1NZIcuY9IDmCe97clY9nm9H2lUhjjyCG3gnjg+uC3JjlSjO/T8lbkdT+fYnkR
 AInVTCPYFjSO9MIOhN0WNIY73HlAjr4zx5TEgS/D4pFj6iGq2qEniSDGMRf+/fVr
 uSbIXbQlum+VAdxbGMSVf8yQPlNcFUXUpSJrbgJE272H6saQuvn5mkwD0RcYXyaI
 OlfXpATDRNTsP3yYImxgr7y29Exo1HnCuC6T1n/+fwkirtMR3a7X6XjaQwFsWcrx
 xxGiHQOve3r/I3DAO6A64T2ceD/XuI43LygqkkljfuoXifnJz7Lo39P9HrY0dhpC
 KSld2n/Vv4xYyykvqAzpvzijwq679ILIbTplhm9gOrfrDRZjWad3uLAcYxsTXXR8
 BQbHGovcAzTOEx/0Quo3NThpAeNYPGyrPz3xBIV+XtPJGWvFsrA/s/po4qWDTmF6
 UTzPoEmznsD+DRboNOKfinCsOnpTAru4gbXevi7sfmMHQbLYN5xgsrF7WdlaxWa6
 4QbJyNUq0O+aL0gyfVLuiZBCQ32Jaz1WvowK856Yl4jwczP5HM0ujyyM75+Kx072
 PdnMgxYYLSij
 =d+wL
 -----END PGP SIGNATURE-----

Merge tag 'pull-monitor-2023-02-03-v2' of https://repo.or.cz/qemu/armbru into staging

Monitor patches for 2023-02-03

# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmPeAkgSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTUagP/iZ24jXaWoFOKaO70wdQ/tdoQObWZnUV
# 8xJNJYmYYbWoiq9wQXHebi/yEgBudso1lLzAnp8lsF12ybnNV1zsjyV/yumEKSNW
# 3nL1NZIcuY9IDmCe97clY9nm9H2lUhjjyCG3gnjg+uC3JjlSjO/T8lbkdT+fYnkR
# AInVTCPYFjSO9MIOhN0WNIY73HlAjr4zx5TEgS/D4pFj6iGq2qEniSDGMRf+/fVr
# uSbIXbQlum+VAdxbGMSVf8yQPlNcFUXUpSJrbgJE272H6saQuvn5mkwD0RcYXyaI
# OlfXpATDRNTsP3yYImxgr7y29Exo1HnCuC6T1n/+fwkirtMR3a7X6XjaQwFsWcrx
# xxGiHQOve3r/I3DAO6A64T2ceD/XuI43LygqkkljfuoXifnJz7Lo39P9HrY0dhpC
# KSld2n/Vv4xYyykvqAzpvzijwq679ILIbTplhm9gOrfrDRZjWad3uLAcYxsTXXR8
# BQbHGovcAzTOEx/0Quo3NThpAeNYPGyrPz3xBIV+XtPJGWvFsrA/s/po4qWDTmF6
# UTzPoEmznsD+DRboNOKfinCsOnpTAru4gbXevi7sfmMHQbLYN5xgsrF7WdlaxWa6
# 4QbJyNUq0O+aL0gyfVLuiZBCQ32Jaz1WvowK856Yl4jwczP5HM0ujyyM75+Kx072
# PdnMgxYYLSij
# =d+wL
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 04 Feb 2023 06:59:20 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* tag 'pull-monitor-2023-02-03-v2' of https://repo.or.cz/qemu/armbru: (35 commits)
  monitor: Rename misc.c to hmp-target.c
  monitor: Loosen coupling between misc.c and monitor.c slightly
  monitor: Move remaining QMP stuff from misc.c to qmp-cmds.c
  monitor: Move remaining HMP commands from misc.c to hmp-cmds.c
  monitor: Move target-dependent HMP commands to hmp-cmds-target.c
  monitor: Move monitor_putc() next to monitor_puts & external linkage
  monitor: Split file descriptor passing stuff off misc.c
  qdev: Move HMP command completion from monitor to softmmu/
  acpi: Move the QMP command from monitor/ to hw/acpi/
  stats: Move HMP commands from monitor/ to stats/
  stats: Move QMP commands from monitor/ to stats/
  runstate: Move HMP commands from monitor/ to softmmu/
  tpm: Move HMP commands from monitor/ to softmmu/
  virtio: Move HMP commands from monitor/ to hw/virtio/
  migration: Move the QMP command from monitor/ to migration/
  migration: Move HMP commands from monitor/ to migration/
  net: Move hmp_info_network() to net-hmp-cmds.c
  net: Move HMP commands from monitor to net/
  hmp: Rewrite strlist_from_comma_list() as hmp_split_at_comma()
  rocker: Move HMP commands from monitor to hw/net/rocker/
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-04 10:19:55 +00:00
Markus Armbruster
aa09b3d5f8 stats: Move QMP commands from monitor/ to stats/
This moves these commands from MAINTAINERS section "QMP" to new
section "Stats".  Status is Orphan.  Volunteers welcome!

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-23-armbru@redhat.com>
2023-02-04 07:56:54 +01:00
Daniel P. Berrangé
6003159ce1 Revert "linux-user: fix compat with glibc >= 2.36 sys/mount.h"
This reverts commit 3cd3df2a95.

glibc has fixed (in 2.36.9000-40-g774058d729) the problem
that caused a clash when both sys/mount.h annd linux/mount.h
are included, and backported this to the 2.36 stable release
too:

  https://sourceware.org/glibc/wiki/Release/2.36#Usage_of_.3Clinux.2Fmount.h.3E_and_.3Csys.2Fmount.h.3E

It is saner for QEMU to remove the workaround it applied for
glibc 2.36 and expect distros to ship the 2.36 maint release
with the fix. This avoids needing to add a further workaround
to QEMU to deal with the fact that linux/brtfs.h now also pulls
in linux/mount.h via linux/fs.h since Linux 6.1

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230110174901.2580297-3-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-02-03 22:55:12 +01:00
Peter Maydell
f991d61d35 Testing, docs, semihosting and plugin updates
- update playbooks for custom runners
   - add section timing support to gitlab
   - upgrade fedora images to 37
   - purge perl from the build system and deps
   - disable unstable tests in CI
   - improve intro, emulation and semihosting docs
   - semihosting bug fix and O_BINARY default
   - add memory-sve test
   - fix some races in qht
   - improve plugin handling of memory helpers
   - optimise plugin hooks
   - fix some plugin deadlocks
   - reduce win64-cross build time by dropping some targets
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmPb3fgACgkQ+9DbCVqe
 KkQbXAf9Eoc+PdNvafbqzH/blPjvd9ve8pJ+GcPDukNXwxP8OF/jFEJUQ1E7l9O7
 y0qV4akKCdIqVice4R5bK2CAq44Y3aut8SDf56C8E3Riha2zA2RbQWOv/zCvA3OP
 LFF+OaXZyg4JTR48HUKzh9ei2bd1+ccBSUe+xlRi59XaV5K8+5bmcZj10QKUR0lD
 0HC5auEWWpayvd5D7Da15C7+oVY3LMCFxSdpHwbuIPPan/TRo5yqMI6ChYDKB8QD
 gdwMCL8znj2ADCTBftyBDYDAtjKVyLQidf7KdQHiSF+nmXYopS6SbsPCOMtJqCMH
 tXcKAIxs/MEntPrWTKTdtdnzotJVKw==
 =AtfN
 -----END PGP SIGNATURE-----

Merge tag 'pull-jan-omnibus-020223-1' of https://gitlab.com/stsquad/qemu into staging

Testing, docs, semihosting and plugin updates

  - update playbooks for custom runners
  - add section timing support to gitlab
  - upgrade fedora images to 37
  - purge perl from the build system and deps
  - disable unstable tests in CI
  - improve intro, emulation and semihosting docs
  - semihosting bug fix and O_BINARY default
  - add memory-sve test
  - fix some races in qht
  - improve plugin handling of memory helpers
  - optimise plugin hooks
  - fix some plugin deadlocks
  - reduce win64-cross build time by dropping some targets

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmPb3fgACgkQ+9DbCVqe
# KkQbXAf9Eoc+PdNvafbqzH/blPjvd9ve8pJ+GcPDukNXwxP8OF/jFEJUQ1E7l9O7
# y0qV4akKCdIqVice4R5bK2CAq44Y3aut8SDf56C8E3Riha2zA2RbQWOv/zCvA3OP
# LFF+OaXZyg4JTR48HUKzh9ei2bd1+ccBSUe+xlRi59XaV5K8+5bmcZj10QKUR0lD
# 0HC5auEWWpayvd5D7Da15C7+oVY3LMCFxSdpHwbuIPPan/TRo5yqMI6ChYDKB8QD
# gdwMCL8znj2ADCTBftyBDYDAtjKVyLQidf7KdQHiSF+nmXYopS6SbsPCOMtJqCMH
# tXcKAIxs/MEntPrWTKTdtdnzotJVKw==
# =AtfN
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 02 Feb 2023 15:59:52 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* tag 'pull-jan-omnibus-020223-1' of https://gitlab.com/stsquad/qemu: (36 commits)
  gitlab: cut even more from cross-win64-system build
  plugins: Iterate on cb_lists in qemu_plugin_user_exit
  cpu-exec: assert that plugin_mem_cbs is NULL after execution
  tcg: exclude non-memory effecting helpers from instrumentation
  translator: always pair plugin_gen_insn_{start, end} calls
  plugins: fix optimization in plugin_gen_disable_mem_helpers
  plugins: make qemu_plugin_user_exit's locking order consistent with fork_start's
  util/qht: use striped locks under TSAN
  thread: de-const qemu_spin_destroy
  util/qht: add missing atomic_set(hashes[i])
  cpu: free cpu->tb_jmp_cache with RCU
  tests/tcg: add memory-sve test for aarch64
  semihosting: add O_BINARY flag in host_open for NT compatibility
  semihosting: Write back semihosting data before completion callback
  docs: add an introduction to the system docs
  semihosting: add semihosting section to the docs
  docs: add a new section to outline emulation support
  docs: add hotlinks to about preface text
  MAINTAINERS: Fix the entry for tests/tcg/nios2
  gitlab: wrap up test results for custom runners
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-02-02 18:00:41 +00:00
Marc-André Lureau
e2c4012bc3 build-sys: fix crlf-ending C code
On msys2, the shader-to-C script produces bad C:
./ui/shader/texture-blit-vert.h:2:5: error: missing terminating " character [-Werror]

Fix it by changing the line ending from crlf to lf, and convert the
script to Python (qemu build seems perl-free after that).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230110132700.833690-2-marcandre.lureau@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-6-alex.bennee@linaro.org>
2023-02-02 10:44:23 +00:00
Philippe Mathieu-Daudé
ec6bf79d7d qemu/bswap: Use compiler __builtin_bswap() on NetBSD
Since commit efc6c070ac ("configure: Add a test for the minimum
compiler version") the minimum compiler version required for GCC
is 4.8, which supports __builtin_bswap().
Remove the NetBSD specific ifdef'ry.

This reverts commit 1360677cfe
("makes NetBSD use the native bswap functions").

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230111163147.71761-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-26 13:25:07 +01:00
Philippe Mathieu-Daudé
e76ce15db7 qemu/bswap: Remove <byteswap.h> dependency
Since commit efc6c070ac ("configure: Add a test for the minimum
compiler version") the minimum compiler version required for GCC
is 4.8, which supports __builtin_bswap().
Drop the <byteswap.h> dependency.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230111163147.71761-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-26 13:25:07 +01:00
Markus Armbruster
34d55725e6 ui/spice: Require spice-server >= 0.14.0
Version 0.14.0 is now old enough to have made it into the major
distributions:

     Debian 11: 0.14.3
     RHEL-8: 0.14.3
     FreeBSD (ports): 0.15.0
     Fedora 35: 0.15.0
     Ubuntu 20.04: 0.14.2
     OpenSUSE Leap 15.3: 0.14.3

Requiring it lets us drop a number of version checks.  The next commit
will clean up some more.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230109190321.1056914-6-armbru@redhat.com>
2023-01-19 13:30:01 +01:00
Markus Armbruster
5c167b5301 ui/spice: Require spice-protocol >= 0.14.0
Version 0.14.0 is now old enough to have made it into the major
distributions:

   Debian 11: 0.14.3
   RHEL-8: 0.14.2
   FreeBSD (ports): 0.14.4
   Fedora 35: 0.14.0
   Ubuntu 20.04: 0.14.0
   OpenSUSE Leap 15.3: 0.14.3

Requiring it lets us drop two version checks in ui/vdagent.c.  It also
enables the next commit.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230109190321.1056914-4-armbru@redhat.com>
2023-01-19 13:30:01 +01:00
Richard Henderson
701ea5870d util/bufferiszero: Use __attribute__((target)) for avx2/avx512
Use the attribute, which is supported by clang, instead of
the #pragma, which is not supported and, for some reason,
also not detected by the meson probe, so we fail by -Werror.

Include only <immintrin.h> as that is the outermost "official"
header for these intrinsics -- emmintrin.h and smmintrin -- are
older SSE2 and SSE4 specific headers, while the immintrin.h
includes all of the Intel intrinsics.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-16 10:14:12 -10:00
Ilya Leoshkevich
7c10cb38cc accel/tcg: Add debuginfo support
Add libdw-based functions for loading and querying debuginfo. Load
debuginfo from the system and the linux-user loaders.

This is useful for the upcoming perf support, which can then put
human-readable guest symbols instead of raw guest PCs into perfmap and
jitdump files.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-3-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-16 10:14:12 -10:00
Paolo Bonzini
f995037430 mips: Always include nanomips disassembler
Since the nanomips disassembler is not C++ code anymore, it need not
depend on link_language == cpp.  Always include it and remove the
CONFIG_NANOMIPS_DIS symbol.

Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230110084942.299460-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13 16:22:53 +01:00
Peter Maydell
3d83b78285 * Atomic memslot updates for KVM (Emanuele, David)
* Always send errors to logfile when daemonized (Greg)
 * Add support for IDE CompactFlash card (Lubomir)
 * First round of build system cleanups (myself)
 * First round of feature removals (myself)
 * Reduce "qemu/accel.h" inclusion (Philippe)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmO3Ym0UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNYmwf+LHEw+4T0fk1+2NfgIzH3+8s1EqDm
 Ai56EjxO/p5NUptflXAnhn4P3LawswmmNE0ZIFFFBgwG5E9L+Jj/u5efuLu4uYPg
 bboEBDn8nxSNN2l08u9TyS6kSWSxbwwrs7i2+V+4uQIlVIcCHu+A0vpXns4vWwY0
 zZGF8CgJKDQdPIxdXrH8+6/xtadQ8uDkYsAWDiY/nhozCsCUTAZGTXWEQbHJLARI
 Z4X+Cmz/NFB9G4ka6K/y0HbQw99KA8G/EMPUSglN0ya10yjpyzrmeI7IlIves+5U
 8lhCZXyBhaV9GXlIK1vIgEXlHf83C19a+v0DpW0bpxK631n2VR5y3CArBg==
 =2Koq
 -----END PGP SIGNATURE-----

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* Atomic memslot updates for KVM (Emanuele, David)
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)

# gpg: Signature made Thu 05 Jan 2023 23:51:09 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
  i386: SGX: remove deprecated member of SGXInfo
  target/i386: Add SGX aex-notify and EDECCSSA support
  util: remove support -chardev tty and -chardev parport
  util: remove support for hex numbers with a scaling suffix
  KVM: remove support for kernel-irqchip=off
  docs: do not talk about past removal as happening in the future
  meson: accept relative symlinks in "meson introspect --installed" data
  meson: cleanup compiler detection
  meson: support meson 0.64 -Doptimization=plain
  configure: test all warnings
  tests/qapi-schema: remove Meson workaround
  meson: cleanup dummy-cpus.c rules
  meson: tweak hardening options for Windows
  configure: remove backwards-compatibility and obsolete options
  configure: preserve qemu-ga variables
  configure: cleanup $cpu tests
  configure: remove dead function
  configure: remove useless write_c_skeleton
  ide: Add "ide-cf" driver, a CompactFlash card
  ide: Add 8-bit data mode
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-08 14:27:40 +00:00
Peter Maydell
aaa90fede5 Fix race conditions in new user-only vma tracking.
Add tcg backend paired register allocation.
 Cleanup tcg backend function call abi.
 -----BEGIN PGP SIGNATURE-----
 
 iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmO3kZEdHHJpY2hhcmQu
 aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/JpwgAj9kwpiWehGWrpQp9
 rbEL+Fsx+SDhnoLVpF6nmSB1nkDqdgkdnhyRaLX9wM69bnocsGppZ5sd57J/cH3m
 WiODVVbWP80WHonx5EN4htQv99TZWqVmXVl11DwOfsRUmINl4GG4kvHOOABd8hdc
 39eRgGBBMyMShc6MUJiToyjEAcZPcGAiHkSW9YDGbvzhlloNWh46eLP1bdW3UJWK
 UiEwPpXqg+L0V8nuuQnSFoPr5FIJmmoTeiGCRHXtvgOT7J8/6eKUESpfcKkHq1ye
 dwcJQATuZip3+hyCCVveiZ86TQ81RMp9en1qw+HVzfed1Ial3Tk+tqiDqZJFm25b
 GMpa5g==
 =OjPl
 -----END PGP SIGNATURE-----

Merge tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu into staging

Fix race conditions in new user-only vma tracking.
Add tcg backend paired register allocation.
Cleanup tcg backend function call abi.

# gpg: Signature made Fri 06 Jan 2023 03:12:17 GMT
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu: (47 commits)
  tests/tcg/multiarch: add vma-pthread.c
  accel/tcg: Handle false negative lookup in page_check_range
  accel/tcg: Use g_free_rcu for user-exec interval trees
  accel/tcg: Fix tb_invalidate_phys_page_unwind
  tcg: Add TCGHelperInfo argument to tcg_out_call
  tcg/aarch64: Merge tcg_out_callr into tcg_out_call
  tcg: Move ffi_cif pointer into TCGHelperInfo
  tcg: Factor init_ffi_layouts() out of tcg_context_init()
  tcg: Convert typecode_to_ffi from array to function
  tcg: Reorg function calls
  tcg: Use output_pref wrapper function
  tcg: Vary the allocation size for TCGOp
  tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*()
  accel/tcg/plugin: Use copy_op in append_{udata,mem}_cb
  accel/tcg/plugin: Avoid duplicate copy in copy_call
  accel/tcg/plugin: Don't search for the function pointer index
  tcg: Use TCG_CALL_ARG_EVEN for TCI special case
  tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32
  tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64
  tcg: Introduce TCGCallReturnKind and TCGCallArgumentKind
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-06 15:40:37 +00:00
Paolo Bonzini
e513402436 meson: cleanup compiler detection
Detect all compilers at the beginning of meson.build, and store
the available languages in an array.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06 00:51:02 +01:00
Paolo Bonzini
6a97f39392 meson: support meson 0.64 -Doptimization=plain
In Meson 0.64, the optimization built-in option now accepts the "plain" value,
which will not set any optimization flags.  While QEMU does not check the
contents of the option and therefore does not suffer any ill effect
from the new value, it uses get_option to print the optimization flags
in the summary.  Clean the code up to remove duplication, and check for
-Doptimization=plain at the same time.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06 00:51:02 +01:00
Paolo Bonzini
2d73fa7472 meson: tweak hardening options for Windows
meson.build has been enabling ASLR _only_ for debug builds since
commit d2147e04f9 ("configure: move Windows flags detection to meson",
2022-05-07); instead it was supposed to disable it for debug builds.

However, the flag has been enabled for DLLs upstream for roughly 2
years (https://sourceware.org/bugzilla/show_bug.cgi?id=19011), and
also by some distros including Debian for 6 years even
(https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=836365).

Enable it unconditionally; we can fix the reversed logic of commit
d2147e04f9 later if there are any reports, but for now just
enable the hardening.

Also add -Wl,--high-entropy-va, which also controls ASLR.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-06 00:51:02 +01:00
Richard Henderson
ed145144c4 meson: Move CONFIG_TCG_INTERPRETER to config_host
Like CONFIG_TCG, the enabled method of execution is a host property
not a guest property.  This exposes the define to compile-once files.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-04 16:20:01 -08:00
Michal Privoznik
6bb613f081 hostmem: Honor multiple preferred nodes if possible
If a memory-backend is configured with mode
HOST_MEM_POLICY_PREFERRED then
host_memory_backend_memory_complete() calls mbind() as:

  mbind(..., MPOL_PREFERRED, nodemask, ...);

Here, 'nodemask' is a bitmap of host NUMA nodes and corresponds
to the .host-nodes attribute. Therefore, there can be multiple
nodes specified. However, the documentation to MPOL_PREFERRED
says:

  MPOL_PREFERRED
    This mode sets the preferred node for allocation. ...
    If nodemask specifies more than one node ID, the first node
    in the mask will be selected as the preferred node.

Therefore, only the first node is honored and the rest is
silently ignored. Well, with recent changes to the kernel and
numactl we can do better.

The Linux kernel added in v5.15 via commit cfcaa66f8032
("mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY")
support for MPOL_PREFERRED_MANY, which accepts multiple preferred
NUMA nodes instead.

Then, numa_has_preferred_many() API was introduced to numactl
(v2.0.15~26) allowing applications to query kernel support.

Wiring this all together, we can pass MPOL_PREFERRED_MANY to the
mbind() call instead and stop ignoring multiple nodes, silently.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <a0b4adce1af5bd2344c2218eb4a04b3ff7bcfdb4.1671097918.git.mprivozn@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
2022-12-28 14:59:55 +01:00
Brad Smith
28236ad8d1 qga: Add initial OpenBSD and NetBSD support
qga: Add initial OpenBSD and NetBSD support

Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
2022-12-20 15:54:41 +02:00
Claudio Fontana
29e0bfffab gtk: disable GTK Clipboard with a new meson option
The GTK Clipboard implementation may cause guest hangs.

Therefore implement new configure switch: --enable-gtk-clipboard,

as a meson option disabled by default, which warns in the help
text about the experimental nature of the feature.
Regenerate the meson build options to include it.

The initialization of the clipboard is gtk.c, as well as the
compilation of gtk-clipboard.c are now conditional on this new
option to be set.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1150
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Message-Id: <20221121135538.14625-1-cfontana@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-11-23 12:15:06 +01:00