TARGET_MINSIGSTKSZ has been defined in generic/signal.h
or target_signal.h, We don't need to define it again.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This value is fully internal to qemu, and so is not a TARGET define.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fallback code in cpu_loop_exit_sigsegv is sufficient for
openrisc linux-user.
This makes all of the code in mmu.c sysemu only, so remove
the ifdefs and move the file to openrisc_softmmu_ss.
Remove the code from cpu_loop that handled EXCP_DPF.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
QEMU does not allow the system control bits for either exception to
be enabled in linux-user, therefore both exceptions are dead code.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create and record the rt signal trampoline.
Reviewed-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to access the target errno indepently of the rest of the
linux-user code. Move the header containing the generic errno
definitions ('errno_defs.h') to 'generic/target_errno_defs.h',
create a new 'target_errno_defs.h' in each target which itself
includes 'generic/target_errno_defs.h'.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210708170550.1846343-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which already contained the same value.
In the rest of the cases, we were passing the stack pointer
out of env directly.
Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Note that target_restore_altstack uses the host memory
pointer that we have already verified, so TARGET_EFAULT
is not a possible return value.
Note that using -EFAULT was a bug.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Update gensyscalls.sh not to generate an empty line at the end of the file
And then automatically update syscall_nr.h running scripts/gensyscalls.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200930003033.554124-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch introduces a generic 'termbits.h' file for following
archs: 'aarch64', 'arm', 'i386, 'm68k', 'microblaze', 'nios2',
'openrisc', 'riscv', 's390x', 'x86_64'.
Since all of these archs have the same termios flag values and
same ioctl_tty numbers, there is no need for a separate 'termbits.h'
file for each one of them. For that reason one generic 'termbits.h'
file was added for all of them and an '#include' directive was
added for this generic file in every arch 'termbits.h' file.
Also, some of the flag values that were missing were added in this
generic file so that it matches the generic 'termibts.h' and 'ioctls.h'
files from the kernel: 'asm-generic/termbits.h' and 'asm-generic/ioctls.h'.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200723210233.349690-2-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements strace argument printing functionality for following syscalls:
* mlock, munlock, mlockall, munlockall - lock and unlock memory
int mlock(const void *addr, size_t len)
int munlock(const void *addr, size_t len)
int mlockall(int flags)
int munlockall(void)
man page: https://man7.org/linux/man-pages/man2/mlock.2.html
Implementation notes:
Syscall mlockall() takes an argument that is composed of predefined values
which represent flags that determine the type of locking operation that is
to be performed. For that reason, a printing function "print_mlockall" was
stated in file "strace.list". This printing function uses an already existing
function "print_flags()" to print the "flags" argument. These flags are stated
inside an array "mlockall_flags" that contains values of type "struct flags".
These values are instantiated using an existing macro "FLAG_TARGET()" that
crates aproppriate target flag values based on those defined in files
'/target_syscall.h'. These target flag values were changed from
"TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set
and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT"
was added in this patch. This value was also added in "syscall.c" in function
"target_to_host_mlockall_arg()". Because this flag value was added in kernel
version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and
in "strace.c") as to support older kernel versions.
The other syscalls have only primitive argument types, so the
rest of the implementation was handled by stating an appropriate
printing format in file "strace.list". Syscall mlock2() is not implemented in
"syscall.c" and thus it's argument printing is not implemented in this patch.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use helper script scripts/gensyscalls.sh to generate the file.
Add TARGET_NR_or1k_atomic
Remove useless comments and blank lines.
Define diretly the __NR_XXX64 syscalls rather than using the
intermediate __NR3264 definition.
Remove wrong cut'n'paste (like "#ifdef __ARCH_WANT_SYNC_FILE_RANGE2")
Add new syscalls from 286 (preadv) to 434 (pidfd_open).
Remove obsolete syscalls 1204 (open) to 1079 (fork).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316085620.309769-5-laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. Add an empty inline function for
each target, and invoke it from the proper places.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. To avoid confusion, rename the
one we have to make it clear it affects the child.
At the same time, pass in the flags from the clone syscall.
We will need them for correct behaviour for Sparc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is hardware support for double-precision floating-point using
pairs of 32-bit registers. Fix latent bugs in the heretofore unused
helper_itofd and helper_ftoid. Include the bit for cpu "any".
Change the default cpu for linux-user to "any".
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Cleanup in the boilerplate that each target must define.
Replace openrisc_env_get_cpu with env_archcpu. The combination
CPU(openrisc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
Acked-by: Stafford Horne <shorne@gmail.com>
Message-Id: <1550073577-4248-1-git-send-email-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.
Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).
This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
All of the existing code was boilerplate from elsewhere,
and would crash the guest upon the first signal.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
---
v2:
Add a comment to the new definition of target_pt_regs.
Install the signal mask into the ucontext.
v3:
Incorporate feedback from Laurent.
add a per target target_fcntl.h and include the generic one from them
No code change.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
and include the file from architectures without specific definitions
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-5-laurent@vivier.eu>
No code change, only move code from main.c to
openrisc/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-10-laurent@vivier.eu>
Create a cpu_loop-common.h for future use by
these new files and use it in the existing
main.c
Introduce target_cpu_copy_regs():
declare the function in cpu_loop-common.h
and an empty function for each target,
to move all the cpu_loop prologues to this function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function
and call it only if the macro is defined.
Move declarations of setup_frame() and setup_rt_frame() to
linux-user/signal-common.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
No code change, only move code from signal.c to
openrisc/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-9-laurent@vivier.eu>
Create a signal-common.h for future use by these new files
and use it in the existing signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
Instead of a sequence of "#if ... #endif" move the
selection to a function in linux-user/*/target_elf.h
We can't add them in linux-user/*/target_cpu.h
because we will need to include "elf.h" to
use ELF flags with eflags, and including
"elf.h" in "target_cpu.h" introduces some
conflicts in elfload.c
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmbmhdosb9.fsf_-_@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Shadow registers are part of the openrisc spec along with sr[cid], as
part of the fast context switching feature. When exceptions occur,
instead of having to save registers to the stack if enabled the CID will
increment and a new set of registers will be available.
This patch only implements shadow registers which can be used as extra
scratch registers via the mfspr and mtspr if required. This is
implemented in a way where it would be easy to add on the fast context
switching, currently cid is hardcoded to 0.
This is need for openrisc linux smp kernels to boot correctly.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Threads work much better when you set the TLS register.
This was fixed in the upstream kernel for Linux 4.9.
Signed-off-by: Richard Henderson <rth@twiddle.net>
TARGET_NR_select can have three different implementations:
1- to always return -ENOSYS
microblaze, ppc, ppc64
-> TARGET_WANT_NI_OLD_SELECT
2- to take parameters from a structure pointed by arg1
(kernel sys_old_select)
i386, arm, m68k
-> TARGET_WANT_OLD_SYS_SELECT
3- to take parameters from arg[1-5]
(kernel sys_select)
x86_64, alpha, s390x,
cris, sparc, sparc64
Some (new) architectures don't define NR_select,
4- but only NR__newselect with sys_select:
mips, mips64, sh
5- don't define NR__newselect, and use pselect6 syscall:
aarch64, openrisc, tilegx, unicore32
Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Reported-by: Allan Wirth <awirth@akamai.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
These headers all use TARGET_CPU_H as header guard symbol. Reuse of
the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_CPU_H for linux-user/$target/target_cpu.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Some of them use guard symbol TARGET_SYSCALL_H, but we also have
CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and
__UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl.
Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is
okay as long as they cannot be included together. The script can't
tell, so it warns.
The script dislikes the other guard symbols, too. They don't match
their file name (they should, to make guard collisions less likely),
and __UC32_SYSCALL_H__ is a reserved identifier.
Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for
linux-user/$target/target_sycall.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Update the OpenRISC main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't implement sigreturn on this target so there is no
code there to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-31-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Sync syscall numbers to match the linux v4.5-rc1 kernel.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
