Commit Graph

99 Commits

Author SHA1 Message Date
Paolo Bonzini
737e150e89 block: move include files to include/block/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:31 +01:00
Corey Bryant
2e1e79dae7 block: Convert close calls to qemu_close
This patch converts all block layer close calls, that correspond
to qemu_open calls, to qemu_close.

Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-15 10:48:57 +02:00
Corey Bryant
6165f4d85d block: Convert open calls to qemu_open
This patch converts all block layer open calls to qemu_open.

Note that this adds the O_CLOEXEC flag to the changed open paths
when the O_CLOEXEC macro is defined.

Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-15 10:48:57 +02:00
Markus Armbruster
4480e0f924 vvfat: Do not clobber the user's geometry
vvfat creates a virtual VFAT filesystem with a certain logical
geometry that depends on its options.  It sets the "geometry hint" to
this geometry.  It is the only block driver to do this.

The geometry hint is about about *physical* geometry, and used only by
certain hard disk device models.

vvfat's hint is normally invisible for device models, because
bdrv_open() puts a raw format on top of vvfat's fat protocol.  That
raw format is where drive_init() puts the user's geometry (if any),
and where the device model gets it from.

Nobody complained, because the default physical geometry is the same
as vvfat's logical geometry:

    opts        LCHS        def. PCHS
                1024,16,63  same
    :32:        1024,16,63  same
    :16:        1024,16,63  same
    :12:          64,16,63  same

Except when you specify :floppy:

    opts        LCHS        def. PCHS
       :floppy:   80, 2,36  5,16,63
    :32:floppy:   80, 2,36  5,16,63
    :16:floppy:   80, 2,36  5,16,63
    :12:floppy:   80, 2,18  2,16,63

Silly thing to do for use with a hard disk.

However, the "raw" format can be suppressed by adding an
redundant-looking "format=vvfat" to "file=fat:FOO".  Then, vvfat's
hint clobbers the user's geometry, i.e. -drive options cyls, heads,
secs get silently ignored.  Don't do that.

No change without format=vvfat.  With it, the user's hard disk
geometry (-drive options cyls, heads, secs) is now obeyed, and the
default hard disk geometry with :floppy: now matches the one without
format=vvfat.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17 16:48:30 +02:00
Markus Armbruster
f91cbefe2d vvfat: Fix partition table
Unless parameter ":floppy:" is given, vvfat creates a virtual image
with DOS MBR defining a single partition which holds the FAT file
system.  The size of the virtual image depends on the width of the
FAT: 32 MiB (CHS 64, 16, 63) for 12 bit FAT, 504 MiB (CHS 1024, 16,
63) for 16 and 32 bit FAT, leaving (64*16-1)*63 = 64449 and
(1024*16-1)*64 = 1032129 sectors for the partition.

However, it screws up the end of the partition in the MBR:

    FAT width param.  start CHS  end CHS     start LBA  size
        :32:          0,1,1      1023,14,63       63    1032065
        :16:          0,1,1      1023,14,55       63    1032057
        :12:          0,1,1        63,14,55       63      64377

The actual FAT file system nevertheless assumes the partition has
1032129 or 64449 sectors.  Oops.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17 16:48:30 +02:00
Jim Meyering
eba25057b9 block: prevent snapshot mode $TMPDIR symlink attack
In snapshot mode, bdrv_open creates an empty temporary file without
checking for mkstemp or close failure, and ignoring the possibility
of a buffer overrun given a surprisingly long $TMPDIR.
Change the get_tmp_filename function to return int (not void),
so that it can inform its two callers of those failures.
Also avoid the risk of buffer overrun and do not ignore mkstemp
or close failure.
Update both callers (in block.c and vvfat.c) to propagate
temp-file-creation failure to their callers.

get_tmp_filename creates and closes an empty file, while its
callers later open that presumed-existing file with O_CREAT.
The problem was that a malicious user could provoke mkstemp failure
and race to create a symlink with the selected temporary file name,
thus causing the qemu process (usually root owned) to open through
the symlink, overwriting an attacker-chosen file.

This addresses CVE-2012-2652.
http://bugzilla.redhat.com/CVE-2012-2652

Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-30 14:48:40 +08:00
Paolo Bonzini
e023b2e244 block: fix snapshot on QED
QED's opaque data includes a pointer back to the BlockDriverState.
This breaks when bdrv_append shuffles data between bs_new and bs_top.
To avoid this, add a "rebind" function that tells the driver about
the new relationship between the BlockDriverState and its opaque.

The patch also adds rebind to VVFAT for completeness, even though
it is not used with live snapshots.

Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-10 10:32:12 +02:00
Stefan Hajnoczi
8d98734651 vvfat: avoid leaking file descriptor in commit_one_file()
Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-13 10:36:59 +00:00
Stefan Hajnoczi
73f703ca8f vvfat: convert to .bdrv_co_is_allocated()
It is trivial to switch from the synchronous .bdrv_is_allocated()
interface to .bdrv_co_is_allocated() since vvfat_is_allocated() does not
block.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:37 +01:00
Kevin Wolf
3397f0cb48 vvfat: Add migration blocker
vvfat caches more or less everything when in writable mode. For migration
to work, it would have to be invalidated. Block migration for now when
in writable mode (default is readonly).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-23 17:04:05 +01:00
Kevin Wolf
7704df98b0 vvfat: Fix read-write mode
vvfat used to directly call into the qcow2 block driver instead of using the
block.c wrappers. With the coroutine conversion, this stopped working.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2011-11-11 14:02:57 +01:00
Paolo Bonzini
273e4e03b3 vvfat: reorganize computation of disk geometry
First determine FAT12/16/32, then compute geometry from that for both
FDD and HDD.  For 1.44MB floppies, and 2.88MB floppies using FAT16,
change to 1 sector/cluster.  The default remains 2.88MB with FAT12
and 2 sectors/cluster.  Both DOS and mkdosfs by default format a 2.88MB
floppy as FAT12.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-04 17:32:23 +01:00
Paolo Bonzini
d71cff42e4 vvfat: do not hardcode sector counts in error message
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-04 16:36:25 +01:00
Paolo Bonzini
5a742b5557 vvfat: unify and correct computation of sector count
The sector count is stored in the partition and hence must not include the
sectors before its start.  At the same time, remove the useless special
casing for 1.44 MB floppies.  This fixes fsck on VVFAT hard disks,
which otherwise tries to seek past the end of the disk.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-04 16:27:07 +01:00
Paolo Bonzini
aad37c06dd vvfat: need to use first_sectors_number to distinguish fdd/hdd
This is consistent with what "real" floppies have, so file(1)
now actually recognizes the VVFAT image as a 1.44 MB floppy.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-04 16:23:25 +01:00
Paolo Bonzini
e654bfe4c1 vvfat: do not fail if the disk has spare sectors
If the number of "faked sectors" + the number of sectors that are
part of a cluster does not sum up to the total number of sectors,
qemu-img convert fails.  Read these spare sectors as all zeros.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-04 15:55:45 +01:00
Paolo Bonzini
2b6a43a835 vvfat: fix out of bounds array_get usage
When reading the address of the first free entry, you cannot
use array_get without first marking all entries as occupied.

This is visible if you change the sectors per cluster on a
floppy from 2 to 1.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-04 15:42:44 +01:00
Paolo Bonzini
e183ef75cc block: take lock around bdrv_write implementations
This does the first part of the conversion to coroutines, by
wrapping bdrv_write implementations to take the mutex.

Drivers that implement bdrv_write rather than bdrv_co_writev can
then benefit from asynchronous operation (at least if the underlying
protocol supports it, which is not the case for raw-win32), even
though they still operate with a bounce buffer.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21 17:34:14 +02:00
Paolo Bonzini
2914caa088 block: take lock around bdrv_read implementations
This does the first part of the conversion to coroutines, by
wrapping bdrv_read implementations to take the mutex.

Drivers that implement bdrv_read rather than bdrv_co_readv can
then benefit from asynchronous operation (at least if the underlying
protocol supports it, which is not the case for raw-win32), even
though they still operate with a bounce buffer.

raw-win32 does not need the lock, because it cannot yield.
nbd also doesn't probably, but better be safe.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21 17:34:14 +02:00
Paolo Bonzini
848c66e8f5 block: add a CoMutex to synchronous read drivers
The big conversion of bdrv_read/write to coroutines caused the two
homonymous callbacks in BlockDriver to become reentrant.  It goes
like this:

1) bdrv_read is now called in a coroutine, and calls bdrv_read or
bdrv_pread.

2) the nested bdrv_read goes through the fast path in bdrv_rw_co_entry;

3) in the common case when the protocol is file, bdrv_co_do_readv calls
bdrv_co_readv_em (and from here goes to bdrv_co_io_em), which yields
until the AIO operation is complete;

4) if bdrv_read had been called from a bottom half, the main loop
is free to iterate again: a device model or another bottom half
can then come and call bdrv_read again.

This applies to all four of read/write/flush/discard.  It would also
apply to is_allocated, but it is not used from within coroutines:
besides qemu-img.c and qemu-io.c, which operate synchronously, the
only user is the monitor.  Copy-on-read will introduce a use in the
block layer, and will require converting it.

The solution is "simply" to convert all drivers to coroutines!  We
just need to add a CoMutex that is taken around affected operations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-21 17:34:13 +02:00
Kevin Wolf
0d460d6f41 vvfat: Fix potential buffer overflow
path2[PATH_MAX] can be used for the null termination, so make the array big
enough to allow this.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11 09:42:46 +02:00
Stefan Weil
7ef6d3dc39 block/vvfat: Remove unused code
The unused code was detected using cppcheck.

Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11 09:42:45 +02:00
Stefan Weil
ce137829e7 block/vvfat: Fix potential memory leaks and other memory errors
cppcheck reported memory leaks and mismatched g_malloc() with free()
instead of g_free().

Fix these errors.

Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11 09:42:45 +02:00
Stefan Weil
b2bedb2144 Remove blanks before \n in output strings
Those blanks violate the coding conventions, see
scripts/checkpatch.pl.

Blanks missing after colons in the changed lines were added.

This patch does not try to fix tabs, long lines and other
problems in the changed lines, therefore checkpatch.pl reports
many violations.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-16 08:25:56 -05:00
Stefan Weil
541dc0d47f Use new macro QEMU_PACKED for packed structures
Most changes were made using these commands:

git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'

Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.

Manual changes were also applied to hw/pc.c.

I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03 10:45:59 +00:00
Anthony Liguori
7267c0947d Use glib memory allocation and free functions
qemu_malloc/qemu_free no longer exist after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20 23:01:08 -05:00
Blue Swirl
08089edcd2 vvfat: fix a file descriptor leak
Fix a file descriptor leak, reported by cppcheck:
[/src/qemu/block/vvfat.c:759]: (error) Resource leak: dir

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-12 19:48:58 +00:00
Stefan Weil
d523d5d694 block/vvfat: Fix compiler warning in debug code
Fix this compiler warning:
./block/vvfat.c:2285: error: comparison of unsigned expression >= 0 is always true

Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-03 06:40:54 +00:00
Kevin Wolf
a655211ac6 vvfat: Use cache=unsafe
The qcow file used for write support in vvfat is a temporary file,
so we can use cache=unsafe there. Without this, write support is just
too slow to be of any use.

Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
2010-09-21 15:39:42 +02:00
Kevin Wolf
9217e26f43 vvfat: Fix double free for opening the image rw
Allocation and deallocation of bs->opaque is not in the control of a
block driver. Therefore it should not set bs->opaque to a data structure
used by another bs, or closing the image will lead to a double free.

Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
2010-09-21 15:39:42 +02:00
Kevin Wolf
ac48e389d0 vvfat: Fix segfault on write to read-only disk
vvfat tries to set the readonly flag in its open function, but nowadays
this is overwritted with the readonly=... command line option. Check in
bdrv_write if the vvfat was opened read-only and return an error in this
case.

Without this check, vvfat tries to access the qcow bs, which is NULL
without enabled write support.

Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
2010-09-21 15:39:42 +02:00
Loïc Minier
2aa326be0d vvfat: fat_chksum(): fix access above array bounds
Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-30 18:29:22 +02:00
Kevin Wolf
3e89cb0419 vvfat: More build fixes with DEBUG
Casting a pointer to an int doesn't work on 64 bit platforms. Use the %p printf
conversion specifier instead.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-21 11:49:19 +02:00
Riccardo Magliocchetti
792b45b142 vvfat: Fix compilation with DEBUG defined
gcc does not like passing a NULL where an int value is expected:

block/vvfat.c: In function ‘checkpoint’:
block/vvfat.c:2868: error: passing argument 2 of ‘remove_mapping’ makes
  integer from pointer without a cast

Signed-off-by: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-21 11:49:19 +02:00
Kevin Wolf
66f82ceed6 block: Open the underlying image file in generic code
Format drivers shouldn't need to bother with things like file names, but rather
just get an open BlockDriverState for the underlying protocol. This patch
introduces this behaviour for bdrv_open implementation. For protocols which
need to access the filename to open their file/device/connection/... a new
callback bdrv_file_open is introduced which doesn't get an underlying file
opened.

For now, also some of the more obscure formats use bdrv_file_open because they
open() the file themselves instead of using the block.c functions. They need to
be fixed in later patches.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-03 10:07:30 +02:00
Blue Swirl
88bf79500b Fix dead initialization, spotted by clang analyzer
Fix clang warnings:
/src/qemu/block/vvfat.c:1102:9: warning: Value stored to 'index3' during its initialization is never read
    int index3=index1+1;
/src/qemu/cmd.c:290:15: warning: Value stored to 'p' during its initialization is never read
        char *p = result;

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-25 15:27:14 +00:00
Kevin Wolf
d6e9098e10 Replace calls of old bdrv_open
What is known today as bdrv_open2 becomes the new bdrv_open. All remaining
callers of the old function are converted to the new one. In some places they
even know the right format, so they should have used bdrv_open2 from the
beginning.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-23 16:08:46 +02:00
Blue Swirl
43dc2a645e Replace assert(0) with abort() or cpu_abort()
When building with -DNDEBUG, assert(0) will not stop execution
so it must not be used for abnormal termination.

Use cpu_abort() when in CPU context, abort() otherwise.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-18 18:41:57 +00:00
Blue Swirl
a6c6f76ceb Fix build with -DNDEBUG in CFLAGS
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-13 14:18:50 +00:00
Jim Meyering
6265eb26a3 don't dereference NULL after failed strdup
Most of these are obvious NULL-deref bug fixes, for example,
the ones in these files:

  block/curl.c
  net.c
  slirp/misc.c

and the first one in block/vvfat.c.
The others in block/vvfat.c may not lead to an immediate segfault, but I
traced the two schedule_rename(..., strdup(path)) uses, and a failed
strdup would appear to trigger this assertion in handle_renames_and_mkdirs:

	    assert(commit->path);

The conversion to use qemu_strdup in envlist_to_environ is not technically
needed, but does avoid a theoretical leak in the caller when strdup fails
for one value, but later succeeds in allocating another buffer(plausible,
if one string length is much larger than the others).  The caller does
not know the length of the returned list, and as such can only free
pointers until it hits the first NULL.  If there are non-NULL pointers
beyond the first, their buffers would be leaked.  This one is admittedly
far-fetched.

The two in linux-user/main.c are worth fixing to ensure that an
OOM error is diagnosed up front, rather than letting it provoke some
harder-to-diagnose secondary error, in case of exec failure, or worse, in
case the exec succeeds but with an invalid list of command line options.
However, considering how unlikely it is to encounter a failed strdup early
in main, this isn't a big deal.  Note that adding the required uses of
qemu_strdup here and in envlist.c induce link failures because qemu_strdup
is not currently in any library they're linked with.  So for now, I've
omitted those changes, as well as the fixes in target-i386/helper.c
and target-sparc/helper.c.

If you'd like to see the above discussion (or anything else)
in the commit log, just let me know and I'll be happy to adjust.

>From 9af42864fd1ea666bd25e2cecfdfae74c20aa8c7 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering@redhat.com>
Date: Mon, 8 Feb 2010 18:29:29 +0100
Subject: [PATCH] don't dereference NULL after failed strdup

Handle failing strdup by replacing each use with qemu_strdup,
so as not to dereference NULL or trigger a failing assertion.
* block/curl.c (curl_open): s/\bstrdup\b/qemu_strdup/
* block/vvfat.c (init_directories): Likewise.
(get_cluster_count_for_direntry, check_directory_consistency): Likewise.
* net.c (parse_host_src_port): Likewise.
* slirp/misc.c (fork_exec): Likewise.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 14:00:53 -06:00
Naphtali Sprei
058fc8c768 Ask for read-write permissions when opening files
Found some places that seems needs this explicitly, now that
read-write is not the default.

Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 15:42:01 -06:00
Kirill A. Shutemov
2dedf83ef0 block/vvfat.c: fix warnings with _FORTIFY_SOURCE
CC    block/vvfat.o
cc1: warnings being treated as errors
block/vvfat.c: In function 'commit_one_file':
block/vvfat.c:2259: error: ignoring return value of 'ftruncate', declared with attribute warn_unused_result
make: *** [block/vvfat.o] Error 1
  CC    block/vvfat.o
In file included from /usr/include/stdio.h:912,
                 from ./qemu-common.h:19,
                 from block/vvfat.c:27:
In function 'snprintf',
    inlined from 'init_directories' at block/vvfat.c:871,
    inlined from 'vvfat_open' at block/vvfat.c:1068:
/usr/include/bits/stdio2.h:65: error: call to __builtin___snprintf_chk will always overflow destination buffer
make: *** [block/vvfat.o] Error 1

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 14:59:20 -06:00
Anthony Liguori
c227f0995e Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b72.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01 16:12:16 -05:00
malc
99a0949b72 Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>
2009-10-01 22:45:02 +04:00
Michael S. Tsirkin
6ab00cee70 vvfat: fix coding style nit
Put space between = and & when taking a pointer,
to avoid confusion with old-style "&=".

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-30 18:45:50 +00:00
Christoph Hellwig
f9e96436cc vvfat: one more missing BlockDriver C99 initializer conversion
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-28 02:14:56 -05:00
Kevin Wolf
91a073a975 Drop bdrv_create2
This patch converts the remaining users of bdrv_create2 to bdrv_create and
removes the now unused function.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-27 09:45:23 -05:00
Kevin Wolf
0e7e1989f7 Convert all block drivers to new bdrv_create
Now we can make use of the newly introduced option structures. Instead of
having bdrv_create carry more and more parameters (which are format specific in
most cases), just pass a option structure as defined by the driver itself.

bdrv_create2() contains an emulation of the old interface to simplify the
transition.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22 10:50:31 -05:00
Anthony Liguori
019d6b8ff0 Move block drivers into their own directory
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14 16:13:46 -05:00