It is no longer necessary to point .gitmodules at GitLab repos when
running in GitLab CI since they are now used all the time.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, our check-system-* jobs are recompiling the whole sources
again. This happens due to the fact that the jobs are checking out
the whole source tree and required submodules again, and only try
to use the "build" directory with the binaries and object files as an
artifact from the previous stage - which simply does not work right
anymore (with the current version of meson). Due to some changed
time stamps, meson/ninja are always trying to rebuild the whole tree.
In the long run, we could likely use "meson test --no-rebuild", but
there is still some work going on in that area to improve the user
experience. So until this has been done, simply avoid recompiling the
sources with a trick: pass NINJA=":" to the make process in the test
jobs. Also check out the submodules manually before updating the
timestamps in the build folder, so that the binaries are definitely
newer that all the source files.
This saves ca. 10 - 15 minutes of precious CI cycles in each run.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210126065757.403853-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The build-without-default-features job is running quite long and sometimes
already hits the 1h time limit. Exclude some targets which do not provide
additional test coverage here (since we e.g. also already test other targets
of the same type, just with different endianess, or a 64-bit superset) to
avoid that we hit the timeout here so easily.
Message-Id: <20210126172345.15947-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the meson build system rework, the configure script prefers the
git submodules over the system libraries. So we are testing compilation
with capstone, fdt and libslirp as a submodule all over the place,
burning CPU cycles by recompiling these third party modules and wasting
some network bandwidth in the CI by cloning the submodules each time.
Let's stop doing that in at least a couple of jobs and use the system
libraries instead.
While we're at it, also install meson in the Fedora container, since
it is new enough already, so we do not need to check out the meson
submodule here.
Message-Id: <20210121174451.658924-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a configuration tested by Peter Maydell (see [1] and [2])
but not covered in our CI [3]:
[705/2910] Compiling C object libqemu-arm-linux-user.fa.p/linux-user_strace.c.o
FAILED: libqemu-arm-linux-user.fa.p/linux-user_strace.c.o
../linux-user/strace.c: In function 'do_print_sockopt':
../linux-user/strace.c:2831:14: error: 'IPV6_ADDR_PREFERENCES' undeclared (first use in this function)
case IPV6_ADDR_PREFERENCES:
^
This job currently takes 31 minutes 32 seconds ([4]).
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05086.html
[2] https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg05379.html
[3] https://gitlab.com/philmd/qemu/-/jobs/977408284
[4] https://gitlab.com/philmd/qemu/-/jobs/978223286
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210121172829.1643620-3-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we first converted our documentation to Sphinx, we split it into
multiple manuals (system, interop, tools, etc), which are all built
separately. The primary driver for this was wanting to be able to
avoid shipping the 'devel' manual to end-users. However, this is
working against the grain of the way Sphinx wants to be used and
causes some annoyances:
* Cross-references between documents become much harder or
possibly impossible
* There is no single index to the whole documentation
* Within one manual there's no links or table-of-contents info
that lets you easily navigate to the others
* The devel manual doesn't get published on the QEMU website
(it would be nice to able to refer to it there)
Merely hiding our developer documentation from end users seems like
it's not enough benefit for these costs. Combine all the
documentation into a single manual (the same way that the readthedocs
site builds it) and install the whole thing. The previous manual
divisions remain as the new top level sections in the manual.
* The per-manual conf.py files are no longer needed
* The man_pages[] specifications previously in each per-manual
conf.py move to the top level conf.py
* docs/meson.build logic is simplified as we now only need to run
Sphinx once for the HTML and then once for the manpages5B
* The old index.html.in that produced the top-level page with
links to each manual is no longer needed
Unfortunately this means that we now have to build the HTML
documentation into docs/manual in the build tree rather than directly
into docs/; otherwise it is too awkward to ensure we install only the
built manual and not also the dependency info, stamp file, etc. The
manual still ends up in the same place in the final installed
directory, but anybody who was consulting documentation from within
the build tree will have to adjust where they're looking.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210115154449.4801-1-peter.maydell@linaro.org
These tests are good at shaking out missing stubs which otherwise work
if we have built targets. Rather than create a new job just add the
checks to the existing tools-and-docs build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-12-alex.bennee@linaro.org>
While we are at it we might as well check the tag generation. For
bonus points we run GNU globals htags into the public pages directory
for publishing with the auto generated pages.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210114165730.31607-10-alex.bennee@linaro.org>
Add build-system-opensuse jobs and opensuse-leap.docker dockerfile.
Use openSUSE Leap 15.2 container image in the gitlab-CI.
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201229085046.8536-1-acho@suse.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210190417.31673-8-alex.bennee@linaro.org>
Keep the logs of acceptance tests for two days on GitLab. If you want
to make it available for more time, click on the 'Keep' button on
the Job page at web UI.
By default GitLab will archive artifacts only if the job succeed.
Instead let's keep it on both success and failure, so it gives the
opportunity to the developer/maintainer to check the error logs
as well as to the logs of CANCEL tests (not shown on the job logs).
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201211183827.915232-4-wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace the code (python) on after_script of the acceptance jobs that
is currently used to show the logs of failed tests. Instead it is used
the Avocado's testlogs plug-in which works likewise.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20201211183827.915232-3-wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-9-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similarly to commit 8cdb2cef3f, move the coroutine tests to GitLab.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201108204535.2319870-13-philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
[thuth: Replaced Travis by Gitlab-CI in comment]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Similarly to commit 8cdb2cef3f, move the user-static test to GitLab.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201108204535.2319870-11-philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We will keep adding/removing options to our 'configure' script,
so for easier maintainability it makes sense to have CONFIGURE_ARGS
declared as one option per line. This way we can review diff easily
(or rebase/cherry-pick).
No logical change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201108204535.2319870-6-philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Document what this job cover (build X86 targets with
KVM being the single accelerator available).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201207131503.3858889-2-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Similarly to commit 8cdb2cef3f, move the trace backend
tests to GitLab.
Note the User-Space Tracer backend is still tested on
Ubuntu by the s390x jobs on Travis-CI.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201111121234.3246812-3-philmd@redhat.com>
Message-Id: <20201117173635.29101-7-alex.bennee@linaro.org>
The GCC check-tcg (user) test in particular was very prone to timing
out on Travis. We only actually need to move the some-softmmu builds
across as we already have coverage for linux-user.
As --enable-debug-tcg does increase the run time somewhat as more
debug is put in let's restrict that to just the plugins build. It's
unlikely that a plugins enabled build is going to hide a sanity
failure in core TCG code so let the plugin builds do the heavy lifting
on checking TCG sanity so the non-plugin builds can run swiftly.
Now the only remaining check-tcg builds on Travis are for the various
non-x86 arches.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201117173635.29101-5-alex.bennee@linaro.org>
Meson runs a test to see if Sphinx works, and automatically disables it
on error. This can lead to the CI jobs skipping docs build without
maintainers noticing the problem. Use --enable-docs to force a fatal
error if Sphinx doesn't work on the jobs where we expect it to be OK.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201102130926.161183-3-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Most of the build jobs will create the sphinx documentation. If we
expose this as an artifact of a "pages" job in a "public" directory, it
will get published using GitLab Pages. This means a user can push a
branch with docs changes to GitLab and view the results at
https://yourusername.gitlab.io/qemu/
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201102130926.161183-2-berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This cache rule is meant for Avocado artifacts, but affects
all jobs. Moreover the 'acceptance_template' template already
include a more detailled rule to cache artifacts.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201108221925.2344515-2-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let GitLab runners use GitLab repository directly.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201022123302.2884788-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The tests are running in containers here, so it should be OK to
run with AVOCADO_ALLOW_UNTRUSTED_CODE enabled in this case.
Message-Id: <20201023073351.251332-4-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
-----BEGIN PGP SIGNATURE-----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=lCRK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-13' into staging
* qtest improvements (test for crash found with the fuzzer, increase
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
# gpg: Signature made Tue 13 Oct 2020 11:49:06 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-13: (23 commits)
scripts/ci/gitlab-pipeline-status: wait for pipeline creation
scripts/ci/gitlab-pipeline-status: use more descriptive exceptions
scripts/ci/gitlab-pipeline-status: handle keyboard interrupts
scripts/ci/gitlab-pipeline-status: refactor parser creation
scripts/ci/gitlab-pipeline-status: give early feedback on running pipelines
scripts/ci/gitlab-pipeline-status: improve message regarding timeout
scripts/ci/gitlab-pipeline-status: make branch name configurable
gitlab: assign python helper files to GitLab maintainers section
gitlab: add a CI job to validate the DCO sign off
gitlab: add a CI job for running checkpatch.pl
configure: fixes indent of $meson setup
docs/system/deprecated: Mark the 'moxie' CPU as deprecated
Remove superfluous .gitignore files
MAINTAINERS: Ignore bios-tables-test in the qtest section
Add a comment in bios-tables-test.c to clarify the reason behind approach
softmmu/vl: Be less verbose about missing KVM when running the qtests
tests/migration: Allow longer timeouts
qtest: add fuzz test case
Acceptance tests: show test report on GitLab CI
Acceptance tests: do not show canceled test logs on GitLab CI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While checkpatch.pl can validate DCO sign off that job must always be
advisory only since it is expected that certain patches will fail some
code style rules.
We require the DCO sign off to be mandatory for all commits though, so
it benefits from being validated in a standalone job.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200918132903.1848939-3-berrange@redhat.com>
[thuth: Use "stage: build" to let it run earlier]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This job is advisory since it is expected that certain patches will fail
the style checks and checkpatch.pl provides no way to mark exceptions to
the rules.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200918132903.1848939-2-berrange@redhat.com>
[thuth: Use "stage: build" to let it run earlier]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Avocado will, by default, produce JUnit files. Let's ask GitLab
to present those in the web UI.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009205513.751968-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tests resulting in "CANCEL" in Avocado are usually canceled on
purpose, and are almost identical to "SKIP". The logs for canceled
tests are adding a lot of noise to the logs being shown on GitLab CI,
and causing distraction from real failures.
As a side note, this "after script" is scheduled for removal once the
feature is implemented within Avocado itself.
Reference: https://github.com/avocado-framework/avocado/issues/4266
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201009205513.751968-3-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With 1000 runs, there is a non-negligible chance that the fuzzer can
trigger a crash. With this CI job, we care about catching build/runtime
issues in the core fuzzing code. Actual device fuzzing takes place on
oss-fuzz. For these purposes, only running one input should be
sufficient.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201002143524.56930-1-alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test 067 from qemu-iotests is executing QMP commands to hotplug
and hot-unplug disks, devices and blockdevs. Because the power
of the text-based test harness is limited, it is actually limiting
the checks that it does, for example by skipping DEVICE_DELETED
events.
tests/qtest already has a similar test, drive_del-test.c.
We can merge them, and even reuse some of the existing code in
drive_del-test.c. This will improve the quality of the test by
covering DEVICE_DELETED events and testing multiple architectures
(therefore covering multiple PCI hotplug mechanisms as well as s390x
virtio-ccw).
The only difference is that the new test will always use null-co:// for
the medium rather than qcow2 or raw, but this should be irrelevant for
what the test is covering. For example there are no "qemu-img check"
runs in 067 that would check that the file is properly closed.
The new tests requires PCI hot-plug support, so drive_del-test
is moved from qemu-system-ppc to qemu-system-ppc64.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the job is pretty fast for only a few targets we still want to
catch breakage of the build. By splitting the test step we can
allow_failures for that while still ensuring we don't miss the build
breaking.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201002091538.3017-1-alex.bennee@linaro.org>
Even with the recent split moving beefier plugins into contrib and
dropping them from the check-tcg tests we are still hitting time
limits. This possibly points to a slow down of --debug-tcg but seeing
as we are migrating stuff to gitlab we might as well move there and
bump the timeout.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201002103223.24022-1-alex.bennee@linaro.org>
According to our support policy, Debian 9 is not supported by the
QEMU project anymore. Since we now switched the MinGW cross-compiler
builds to Fedora, we do not need these Debian9-based containers
in the gitlab-CI anymore, and can now also get rid of the "layer3"
container build stage this way.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200921174320.46062-3-thuth@redhat.com>
Message-Id: <20200925154027.12672-11-alex.bennee@linaro.org>
While we are at it move the few places where they are into the
deprecation build bucket.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200915134317.11110-9-alex.bennee@linaro.org>
These targets might be deprecated but we should keep them building
before the final axe comes down. Lets keep them all in one place and
don't hold up the CI if they do fail. They are either poorly tested or
already flaky anyway.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200915134317.11110-8-alex.bennee@linaro.org>
Most jobs test the latest nettle library. This adds explicit coverage
for latest gcrypt using Fedora, and old gcrypt and nettle using
CentOS-7. The latter does a minimal tools-only build, as we only need to
validate that the crypto code builds and unit tests pass. Finally a job
disabling both nettle and gcrypt is provided to validate that gnutls
still works.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200901133050.381844-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we can use all our QEMU test containers in the gitlab-CI, we can
easily add some jobs that test cross-compilation for various architectures.
There is just only small ugliness: Since the shared runners on gitlab.com
are single-threaded, we have to split each compilation job into two parts
(--disable-user and --disable-system), and exclude some additional targets,
to avoid that the jobs are running too long and hitting the timeout of 1 h.
Message-Id: <20200823111757.72002-8-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The default expiration time for artifacts seems to be very high (30 days?).
Since we only need the artifacts to pass the binaries from one stage to
the next one, we can decrease the expiration time to avoid to spam the
file server too much. Two days should be enough in case someone still wants
to have a look after the pipeline finished.
Message-Id: <20200806161546.15325-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The fuzzer job finishes quite early, so we can run the unit tests and
qtests with -fsanitize=address here without extending the total test time.
Message-Id: <20200831153228.229185-1-thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's focus on the gitlab-ci when testing the compilation with disabled
features, thus add more switches there (and while we're at it, sort them
also alphabetically). This should cover the test from the Travis CI now,
too, so that we can remove the now-redundant job from the Travis CI.
Message-Id: <20200806155306.13717-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit 6957fd98dc ("gitlab: add avocado asset caching") we
tried to save the Avocado cache (as in commit c1073e44b4 with
Travis-CI) however it doesn't work as expected. For some reason
Avocado uses /root/avocado_cache/ which we can not select later.
Manually generate a Avocado config to force the use of the
current job's directory.
This patch is based on an earlier version from Philippe Mathieu-Daudé.
Message-Id: <20200730141326.8260-5-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We were missing the two new targets avr-softmmu and rx-softmmu in the
gitlab-CI so far, and did not add some of the "other endianess" targets
like sh4eb-softmmu yet.
Since the current build-system-* jobs run already for a very long time,
let's do not add these missing targets there, but introduce two new
additional build jobs, one running with Debian and one running with
CentOS, and add the new targets there. Also move some targets from
the old build-system-* jobs to these new targets, to distribute the
load and reduce the runtime of the CI.
Message-Id: <20200730141326.8260-4-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This tries to build and run the fuzzers with the same build-script used
by oss-fuzz. This doesn't guarantee that the builds on oss-fuzz will
also succeed, since oss-fuzz provides its own compiler and fuzzer vars,
but it can catch changes that are not compatible with the the
./scripts/oss-fuzz/build.sh script.
The strange way of finding fuzzer binaries stems from the method used by
oss-fuzz:
https://github.com/google/oss-fuzz/blob/master/infra/base-images/base-runner/targets_list
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200720073223.22945-1-thuth@redhat.com>
[thuth: Tweak the "script" to make it work, exclude slirp test, etc.]
Signed-off-by: Thomas Huth <thuth@redhat.com>