The current code compare i (int) with req->count (uint32_t) in a for
loop, risking an infinite loop if req->count is equal to UINT_MAX.
Also i is only used in comparisons or multiplications with unsigned
integers.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Dongxiao Xu <dongxiao.xu@intel.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Replace a lot of formulaic multiplications (containing casts, no less)
with calls to a pair of functions. This encapsulates in a single
place the operations which require care relating to integer overflow.
Cc: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch corresponds to commit
840184a106bc24e745beda5c77e392f6cecd2bc9 from
git://xenbits.xensource.com/qemu-xen-unstable.git.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
There are lots of external users of pci_internals.h,
apparently making it an internal interface only didn't
work out. Let's stop pretending it's an internal header.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 475d67c3bcd6ba9fef917b6e59d96ae69eb1a9b4.
Now that all users have been updated, we don't need the
makefile hack or the softlink anymore.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Include dependencies from pci core using the correct path.
This is required now that it's in the separate directory.
Need to check whether they can be minimized, for now,
keep the code as is.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Refactor common code around calls to cpu_restore_state().
tb_find_pc() has now no external users, make it static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (40 commits)
pseries: Increase default NVRAM size
target-ppc: Don't use hwaddr to represent hardware state
PPC: e500: pci: Export slot2irq calculation
PPC: E500plat: Make a lot of PCI slots available
PPC: E500: Move PCI slot information into params
PPC: E500: Generate dt pci irq map dynamically
PPC: E500: PCI: Make IRQ calculation more generic
PPC: E500: PCI: Make first slot qdev settable
openpic: Accelerate pending irq search
openpic: fix minor coding style issues
MSI-X: Fix endianness
PPC: e500: Declare pci bridge as bridge
PPC: e500: Add MSI support
openpic: add Shared MSI support
openpic: make brr1 model specific
openpic: convert to qdev
openpic: remove irq_out
openpic: rename openpic_t to OpenPICState
openpic: convert simple reg operations to builtin bitops
openpic: remove unused type variable
...
With MMU option xtensa architecture has two TLBs: ITLB and DTLB. ITLB is
only used for code access, DTLB is only for data. However TLB entries in
both TLBs have attribute field controlling write and exec access. These
bits need to be properly masked off depending on TLB type before being
used as tlb_set_page prot argument. Otherwise the following happens:
(1) ITLB entry for some PFN gets invalidated
(2) DTLB entry for the same PFN gets updated, attributes allow code
execution
(3) code at the page with that PFN is executed (possible due to step 2),
entry for the TB is written into the jump cache
(4) QEMU TLB entry for the PFN gets replaced with an entry for some
other PFN
(5) code in the TB from step 3 is executed (possible due to jump cache)
and it accesses data, for which there's no DTLB entry, causing DTLB
miss exception
(6) re-translation of the TB from step 5 is attempted, but there's no
QEMU TLB entry nor xtensa ITLB entry for that PFN, which causes ITLB
miss exception at the TB start address
(7) ITLB miss exception is handled by the guest, but execution is
resumed from the beginning of the faulting TB (the point where ITLB
miss occured), not from the point where DTLB miss occured, which is
wrong.
With that fix the above scenario causes ITLB miss exception (that used
to be step 7) at step 3, right at the beginning of the TB.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds an x argument to qemu_pixman_linebuf_fill so it can
also be used to convert a partial scanline. Then fix tight + png/jpeg
encoding by passing in the x+y offset, so the data is read from the
correct screen location instead of the upper left corner.
Cc: 1087974@bugs.launchpad.net
Cc: qemu-stable@nongnu.org
Reported-by: Tim Hardeneck <thardeck@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Some w64 fixes by Stefan Weil found their way into 0.28.2,
so update the internal copy to that version to improve
windows support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 288fa40736.
The only reason old pixman versions didn't work was the missing
PIXMAN_TYPE_BGRA, which is properly #ifdef'ed now. So we don't
have to require a minimum pixman version.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
CPUID.7.0.EBX[1]=1 indicates IA32_TSC_ADJUST MSR 0x3b is supported
Basic design is to emulate the MSR by allowing reads and writes to the
hypervisor vcpu specific locations to store the value of the emulated MSRs.
In this way the IA32_TSC_ADJUST value will be included in all reads to
the TSC MSR whether through rdmsr or rdtsc.
As this is a new MSR that the guest may access and modify its value needs
to be migrated along with the other MRSs. The changes here are specifically
for recognizing when IA32_TSC_ADJUST is enabled in CPUID and code added
for migrating its value.
Signed-off-by: Will Auld <will.auld@intel.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If no image file for NVRAM is specified, the pseries machine currently
creates a 16K non-persistent NVRAM by default. This basically works, but
is not large enough for current firmware and guest kernels to create all
the NVRAM partitions they would like to. Increasing the default size to
64K addresses this and stops the guest generating error messages.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The hwaddr type is somewhat vaguely defined as being able to contain bus
addresses on the widest possible bus in the system. For that reason it's
discouraged for representing specific pieces of persistent hardware state,
which should instead use an explicit width type that matches the bits
available in real hardware. In particular, because of the possibility that
the size of hwaddr might change if different buses are added to the target
in future, it's not suitable for use in vm state descriptions for savevm
and migration.
This patch purges such unwise uses of hwaddr from the ppc target code,
which turns out to be just one. The ppcemb_tlb_t struct, used on a number
of embedded ppc models to represent a TLB entry contains a hwaddr for the
real address field. This patch changes it to be a fixed uint64_t which is
suitable enough for all machine types which use this structure.
Other uses of hwaddr in CPUPPCState turn out not to be problematic:
htab_base and htab_mask are just used for the convenience of the TCG code;
the underlying machine state is the SDR1 register, which is stored with
a suitable type already. Likewise the mpic_cpu_base field is only used
internally and does not represent fundamental hardware state which needs to
be saved.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
We need the calculation method to get from a PCI slot ID to its respective
interrupt line twice. Once in the internal map function and once when
assembling the device tree.
So let's extract the calculation to a separate function that can be called
by both users.
Signed-off-by: Alexander Graf <agraf@suse.de>
The ppce500 machine doesn't have to stick to hardware limitations,
as it's defined as being fully device tree based.
Thus we can change the initial PCI slot ID to 0x1 which gives us a
whopping 31 PCI devices we can support with this machine now!
Signed-off-by: Alexander Graf <agraf@suse.de>
We have a params struct that allows us to expose differences between
e500 machine models. Include PCI slot information there, so we can have
different machines with different PCI slot topology.
Signed-off-by: Alexander Graf <agraf@suse.de>
Today we're hardcoding the PCI interrupt map in the e500 machine file.
Instead, let's write it dynamically so that different machine types
can have different slot properties.
Signed-off-by: Alexander Graf <agraf@suse.de>
The IRQ line calculation is more or less hardcoded today. Instead, let's
write it as an algorithmic function that theoretically allows an arbitrary
number of PCI slots.
Signed-off-by: Alexander Graf <agraf@suse.de>
Today the first slot id in our e500 pci implementation is hardcoded to
0x11. Keep it there as default, but allow users to change the default to
a different id.
Signed-off-by: Alexander Graf <agraf@suse.de>
When we're done with one interrupt, we need to search for the next pending
interrupt in the queue. This search has grown quite big now that we have
more than 256 possible irq lines.
So let's memorize how many interrupts we have pending in our bitmaps, so
that we can always bail out in the usual case - the one where we're all done.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MSI-X vector tables are usually stored in little endian in memory,
so let's mark the accessors as such.
This fixes MSI-X on e500 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Now that our interrupt controller supports MSIs, let's expose that feature
to the guest through the device tree!
Signed-off-by: Alexander Graf <agraf@suse.de>
The OpenPIC allows MSI access through shared MSI registers. Implement
them for the MPC8544 MPIC, so we can support MSIs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can properly distinguish between openpic model differences,
let's move brr1 out of the raven code path.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch converts the OpenPIC device to qdev. Along the way it
renames the "openpic" target to "raven" and the "mpic" target to
"fsl_mpic_20", to better reflect the actual models they implement.
This way we have a generic OpenPIC device now that can handle
different flavors of the OpenPIC specification.
Signed-off-by: Alexander Graf <agraf@suse.de>
The current openpic emulation contains half-ready code for bypass mode.
Remove it, so that when someone wants to finish it they can start from a
clean state.
Signed-off-by: Alexander Graf <agraf@suse.de>
The openpic code has its own bitmap code to access bits inside of a
bitmap. However, that is overkill when we simply want to check for a
bit inside of a uint32_t.
So instead, let's use normal bit masks and C builtin shifts and ands.
Signed-off-by: Alexander Graf <agraf@suse.de>
The openpic source irqs are carrying around a type indicator that
is never accessed by anything. Remove it.
Signed-off-by: Alexander Graf <agraf@suse.de>
The only difference between the "openpic" and "mpic" memory api subregion
descriptors is the endianness. Unify them as openpic accessors with explicit
endianness markers in their names.
Signed-off-by: Alexander Graf <agraf@suse.de>
The openpic and mpic reset handlers are almost identical. Combine
them and extract the differences into state variables.
Signed-off-by: Alexander Graf <agraf@suse.de>
The IRQ raise mechanisms of the OpenPIC and MPIC controllers is identical,
just that the MPIC one can also raise critical interrupts.
Combine those two and check for critical raise capability during runtime.
Signed-off-by: Alexander Graf <agraf@suse.de>
