The correct A20 masking is done if paging is enabled (protected mode) but it
seems to have been forgotten in real mode. For example from the AMD64 APM Vol. 2
section 1.2.4:
> If the sum of the segment base and effective address carries over into bit 20,
> that bit can be optionally truncated to mimic the 20-bit address wrapping of the
> 8086 processor by using the A20M# input signal to mask the A20 address bit.
Most BIOSes will enable the A20 line on boot, but I found by disabling the A20 line
afterwards, the correct wrapping wasn't taking place.
`handle_mmu_fault' in target/i386/tcg/sysemu/excp_helper.c seems to be the culprit.
In real mode, it fills the TLB with the raw unmasked address. However, for the
protected mode, the `mmu_translate' function does the correct A20 masking.
The fix then should be to just apply the A20 mask in the first branch of the if
statement.
Signed-off-by: Stephen Michael Jothen <sjothen@gmail.com>
Message-Id: <Yo5MUMSz80jXtvt9@air-old.local>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NVMe command set specification for end-to-end data protection formatted
namespace states:
o If the Reference Tag Check bit of the PRCHK field is set to ‘1’ and
the namespace is formatted for Type 3 protection, then the
controller:
▪ should not compare the protection Information Reference Tag
field to the computed reference tag; and
▪ may ignore the ILBRT and EILBRT fields. If a command is
aborted as a result of the Reference Tag Check bit of the
PRCHK field being set to ‘1’, then that command should be
aborted with a status code of Invalid Protection Information,
but may be aborted with a status code of Invalid Field in
Command.
Currently qemu compares reftag in the nvme_dif_prchk function whenever
Reference Tag Check bit is set in the command. For type 3 namespaces
however, caller of nvme_dif_prchk - nvme_dif_check does not increment
reftag for each subsequent logical block. That way commands incorporating
more than one logical block for type 3 formatted namespaces with reftag
check bit set, always fail with End-to-end Reference Tag Check Error.
Comply with spec by handling case of set Reference Tag Check
bit in the type 3 formatted namespace.
Fixes: 146f720c55 ("hw/block/nvme: end-to-end data protection")
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since version 5.2 commit 6eb7a07129 ("hw/block/nvme: change controller
pci id"), the emulated NVMe controller has defaulted to a non-Intel PCI
identifier.
Deprecate the compatibility parameter so we can get rid of it once and
for all.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The Linux kernel quirks the QEMU NVMe controller pretty heavily because
of the namespace identifier mess. Since this is now fixed, bump the
firmware revision number to allow the quirk to be disabled for this
revision.
As of now, bump the firmware revision number to be equal to the QEMU
release version number.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Do not report the "null uuid" (all zeros) in the namespace
identification descriptors.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Do not default to generate an UUID for namespaces if it is not
explicitly specified.
This is a technically a breaking change in behavior. However, since the
UUID changes on every VM launch, it is not spec compliant and is of
little use since the UUID cannot be used reliably anyway and the
behavior prior to this patch must be considered buggy.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
We cannot provide auto-generated unique or persistent namespace
identifiers (EUI64, NGUID, UUID) easily. Since 6.1, namespaces have been
assigned a generated EUI64 of the form "52:54:00:<namespace counter>".
This is will be unique within a QEMU instance, but not globally.
Revert that this is assigned automatically and immediately deprecate the
compatibility parameter. Users can opt-in to this with the
`eui64-default=on` device parameter or set it explicitly with
`eui64=UINT64`.
Cc: libvir-list@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The Identify Controller Serial Number (SN) is the serial number for the
NVM subsystem and must be the same across all controller in the NVM
subsystem.
Enforce this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Pass the right constant to nvme_smart_event(). The NVME_AER* values hold
the bit position in the SMART byte, not the shifted value that we expect
it to be in nvme_smart_event().
Fixes: c62720f137 ("hw/block/nvme: trigger async event during injecting smart warning")
Acked-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Current implementation have problem in the read part of copy command.
Because there is no metadata mangling before nvme_dif_check invocation,
reftag error could be thrown for blocks of namespace that have not been
previously written to.
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since there is no return after nvme_dsm_cb invocation, metadata
associated with non-zero block range is currently zeroed. Also this
behaviour leads to segfault since we schedule iocb->bh two times.
First when entering nvme_dsm_cb with iocb->idx == iocb->nr and
second because of missing return on call stack unwinding by calling
blk_aio_pwrite_zeroes and subsequent nvme_dsm_cb callback.
Fixes: d7d1474fd8 ("hw/nvme: reimplement dsm to allow cancellation")
Signed-off-by: Dmitry Tikhov <d.tihov@yadro.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since nlbas is of type int, it does not work with large namespace size
values, e.g., 9 TB size of file backing namespace and 8 byte metadata
with 4096 bytes lbasz gives negative nlbas value, which is later
promoted to negative int64_t type value and results in negative
ns->moff which breaks namespace
Signed-off-by: Dmitry Tikhov <ddtikhov@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
We have "-sdl" and "-curses", but no "-gtk" and no "-cocoa" ...
these old-style options are rather confusing than helpful nowadays.
Now that the deprecation period is over, let's remove them, so we
get a cleaner interface (where "-display" is the only way to select
the user interface).
Message-Id: <20220519155625.1414365-4-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "-display sdl" option still uses a hand-crafted parser for its
parameters since we didn't want to drag an interface we considered
somewhat flawed into the QAPI schema. Since the flaws are gone now,
it's time to QAPIfy.
This introduces the new "DisplaySDL" QAPI struct that is used to hold
the parameters that are unique to the SDL display. The only specific
parameter is currently "grab-mod" that is used to specify the required
modifier keys to escape from the mouse grabbing mode.
Message-Id: <20220519155625.1414365-3-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Dropping these deprecated parameters simplifies further refactoring
(e.g. QAPIfication is easier without underscores in the name).
Message-Id: <20220519155625.1414365-2-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220524154056.2896913-12-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
g_strdup_printf() allocated memory for path, we should free it with
g_free() when no longer needed.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Message-Id: <20220531080921.4704-1-linmq006@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Clean up the maintainer list.
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Wenchao Wang <wenchao.wang@intel.com>
Message-Id: <DM6PR11MB4090A58ACCA4AD8C752AEEA587199@DM6PR11MB4090.namprd11.prod.outlook.com>
[thuth: Note: Colin Xu's address bounces]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The zhang.zhanghailiang@huawei.com email address has been
stopped. Change it to my new email address.
Signed-off-by: Hailiang Zhang <zhanghailiang@xfusion.com>
Message-Id: <20211214075424.6920-1-zhanghailiang@xfusion.com>
Acked-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 7a523d96a0 ("virtio-ccw: move vhost_ccw_scsi to a separate file")
introduced a new file hw/s390x/vhost-scsi-ccw.c, which received a
couple comments [1][2] to update MAINTAINERS that were missed.
Fix that by making the vhost CCW entries a wildcard.
[1] https://lore.kernel.org/r/d8d2bbd5021076bdba444d31a6da74f507baede3.camel@linux.ibm.com/
[2] https://lore.kernel.org/r/87k0c4gb9f.fsf@redhat.com/
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220525145814.2750501-1-farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Storage key controlled protection is currently not honored when
emulating instructions.
If available, enable key protection for the MEM_OP ioctl, thereby
enabling it for the s390_cpu_virt_mem_* functions, when using kvm.
As a result, the emulation of the following instructions honors storage
keys:
* CLP
The Synch I/O CLP command would need special handling in order
to support storage keys, but is currently not supported.
* CHSC
Performing commands asynchronously would require special
handling, but commands are currently always synchronous.
* STSI
* TSCH
Must (and does) not change channel if terminated due to
protection.
* MSCH
Suppressed on protection, works because fetching instruction.
* SSCH
Suppressed on protection, works because fetching instruction.
* STSCH
* STCRW
Suppressed on protection, this works because no partial store is
possible, because the operand cannot span multiple pages.
* PCISTB
* MPCIFC
* STPCIFC
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220506153956.2217601-3-scgl@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The machine name already contains the words "ccw" and "virtio", so
using "VirtIO-ccw" in the description likely does not really help
the average user to get an idea what this machine type is about.
Thus let's switch to "Virtual s390x machine" now, since "virtual
machine" should be a familiar term, and "s390x" signals that this
is about 64-bit guests (unlike S390 which could mean that it is
31-bit only).
Also expand "v" to "version", since this makes it easier to use
this macro also with non-numeric machine names in downstream.
Message-Id: <20220506065026.513590-1-thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
One less P needed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220523115123.150340-1-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The masking in tcg_out_shl was incorrect, producing an
illegal instruction, rather than merely unspecified results
for the out-of-range shift.
Tested-by: Joel Stanley <joel@jms.id.au>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1051
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We wanted the VPSRAQ variant with the scalar vector shift operand,
not the variant with an immediate operand.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1022
Fixes: 47b331b2a8 ("tcg/i386: Implement avx512 scalar shift")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add an interface to perform moves between TCGv_ptr.
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Also mark raise_exception_ra and raise_exception, lest we
generate a warning about helper_raise_exception returning.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Errors are not all negative numbers: use is_error.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-16-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Test various trap instructions: chk, div, trap, trapv, trapcc, ftrapcc,
and the signals and addresses that we expect from them.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-15-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TPF stands for "trap false", and is a long-form nop for ColdFire.
Re-use the immediate consumption code from trapcc; the insn will
already expand to a nop because of the TCG_COND_NEVER test
within do_trapcc.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.1, Four word
stack frame (format 0), includes Illegal Instruction. Use the
correct frame format, which does not use the ADDR argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), Trace (and others) is
supposed to record the next insn in PC and the address
of the trapping instruction in ADDRESS.
Create gen_raise_exception_format2 to record the trapping
pc in env->mmu.ar. Update m68k_interrupt_all to pass the
value to do_stack_frame. Update cpu_loop to handle EXCP_TRACE.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), Zero Div (and others)
is supposed to record the next insn in PC and the
address of the trapping instruction in ADDRESS.
While the N, Z and V flags are documented to be undefine on DIV0,
the C flag is documented as always cleared.
Update helper_div* to take the instruction length as an argument
and use raise_exception_format2. Hoist the reset of the C flag
above the division by zero check.
Update m68k_interrupt_all to pass mmu.ar to do_stack_frame.
Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the
kernel does in trap_c().
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), CHK, CHK2 (and others)
are supposed to record the next insn in PC and the
address of the trapping instruction in ADDRESS.
Create a raise_exception_format2 function to centralize recording
of the trapping pc in mmu.ar, plus advancing to the next insn.
Update m68k_interrupt_all to pass mmu.ar to do_stack_frame.
Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the
kernel does in trap_c().
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The only value this variable holds is now env->pc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These are raised by guest instructions, and should not
fall through into the default abort case.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add parenthesis around & vs &&.
Remove assignment to sr in function call argument -- note that
sr is unused after the call, so the assignment was never needed,
only the result of the & expression.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Replace an if ladder with a switch for clarity.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than adjust the PC in all of the consumers, raise
the exception with the correct PC in the first place.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In tpm_tis_mmio_read(), tpm_tis_mmio_write() and
tpm_tis_dump_state(), we calculate a locality index with
tpm_tis_locality_from_addr() and then use it as an index into the
s->loc[] array. In all these cases, the array index can't overflow
because the MemoryRegion is sized to be TPM_TIS_NUM_LOCALITIES <<
TPM_TIS_LOCALITY_SHIFT bytes. However, Coverity can't see that, and
it complains (CID 1487138, 1487180, 1487188, 1487198, 1487240).
Add an assertion to tpm_tis_locality_from_addr() that the calculated
locality index is valid, which will help Coverity and also catch any
potential future bug where the MemoryRegion isn't sized exactly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20220525125904.483075-1-stefanb@linux.ibm.com
