Add a test for an image with an unallocated image header; instead of an
assertion, this should result in the image being marked corrupt.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This updates the VDI corruption test to also test static VDI image
creation, as well as the default dynamic image creation.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's possible that we diverge from the specification with our
implementation. Having a reference image in the test cases may detect
such problems when we introduce a bug that can read what it creates, but
can't handle a real VMDK.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The disk image path is echoed by QEMU's readline when the "drive_backup
disk ${TEST_IMG}.copy" HMP command is issued. Unfortunately it is very
hard to filter out the path due to readline's character-by-character
output (with terminal escape sequences). Just redirect this command to
/dev/null for now.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
qcow2's report_unsupported_feature() had two bugs: A 32 bit truncation
would prevent feature table entries for bits 32-63 from being used, and
it could assign errp multiple times if there was more than one unknown
feature, resulting in an error_set() assertion failure.
Fix the truncation, make sure to set the error exactly once and add a
qemu-iotests case for it.
This fixes https://bugs.launchpad.net/qemu/+bug/1342704/
Reported-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When doing a block backup of an image with an unaligned size (with
respect to the BACKUP_CLUSTER_SIZE), qemu would check the allocation
status of sectors after the end of the image. bdrv_is_allocated()
returns a result that is valid for 0 sectors in this case, so the backup
job ran into an endless loop.
Stop looping when seeing a result valid for 0 sectors, we're at EOF then.
The test case looks somewhat unrelated at first sight because I
originally tried to reproduce a different suspected bug that turned out
to not exist. Still a good test case and it accidentally found this one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This avoid breaking tests on RHEL6 where gnutls is too old for quorum to be
built by default.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When mirroring an image of a size that is not a multiple of the
mirror job granularity, the last request would have the right nb_sectors
argument, but a qiov that is rounded up to the next multiple of the
granularity. Don't do this.
This fixes a segfault that is caused by raw-posix being confused by this
and allocating a buffer with request length, but operating on it with
qiov length.
[s/Driver/Drive/ in qemu-iotests 041 as suggested by Eric
--Stefan]
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that active layer block-commit is supported, the 'top' argument
no longer needs to be mandatory.
Change it to optional, with the default being the active layer in the
device chain.
[kwolf: Rebased and resolved conflict in tests/qemu-iotests/040]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While at it, add some more tests to the quick group (those that run with
-nocache in under three seconds on my HDD).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that qemu-iotests-quick.sh supports tests using the qemu binary, we
are free to add such tests to the quick group.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add 'nocow' option so that users could have a chance to set NOCOW flag to
newly created files. It's useful on btrfs file system to enhance performance.
Btrfs has low performance when hosting VM images, even more when the guest
in those VM are also using btrfs as file system. One way to mitigate this bad
performance is to turn off COW attributes on VM files. Generally, there are
two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then
all newly created files will be NOCOW. b) per file. Add the NOCOW file
attribute. It could only be done to empty or new files.
This patch tries the second way, according to the option, it could add NOCOW
per file.
For most block drivers, since the create file step is in raw-posix.c, so we
can do setting NOCOW flag ioctl in raw-posix.c only.
But there are some exceptions, like block/vpc.c and block/vdi.c, they are
creating file by calling qemu_open directly. For them, do the same setting
NOCOW flag ioctl work in them separately.
[Fixed up 082.out due to the new 'nocow' creation option
--Stefan]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
iotest 083 filters out debug messages from nbd, which are prefixed (and
recognized) by __FILE__. However, the current filter (/^nbd\.c…/) is
valid for in-tree builds only, as out-of-tree builds will have a path
before that filename (e.g. "/tmp/qemu/nbd.c"). Fix this by adding .*
before "nbd\.c".
While working on this, also fix the regexes: '.' should be escaped and a
single backslash is not enough for escaping when enclosed by double
quotes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 065 specified python2 to be used in its Shebang; this might not
work on systems without a python2 symlink and furthermore it is now
counter-productive, as the check script compares the Shebang to
"#!/usr/bin/env python" and only uses the Python interpreter selected by
configure on an exact match.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of invoking Python scripts directly via ./, use $PYTHON to
obtain the correct Python interpreter command.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As out-of-tree builds are preferred for qemu, running the qemu-iotests
in that out-of-tree build should be supported as well. To do so, a
symbolic link has to be created pointing to the check script in the
source directory. That script will check whether it has been run through
a symlink, and if so, will assume it is run in the build tree. All
output and temporary operations performed by iotests are then redirected
here and, unless specified otherwise by the user, QEMU_PROG etc. will be
set to paths appropriate for the build tree.
Also, drop making every test case executable if it is not yet, as this
would modify the source tree which is not desired for out-of-tree runs
and should be fixed in the repository anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The to-replace-node-name is designed to allow repairing a broken Quorum file.
This patch introduces a new class TestRepairQuorum testing that the feature
works.
Some further work will be done on QEMU to improve the robustness of the tests.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On read operations when this parameter is set and some replicas are corrupted
while quorum can be reached quorum will proceed to rewrite the correct version
of the data to fix the corrupted replicas.
This will shine with SSD where the FTL will remap the same block at another
place on rewrite.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If 'base' is smaller than the overlay image being committed into it,
then the base image will be grown in commit_run via bdrv_truncate().
This tests to make sure that this works, and the bdrv_truncate() is
not blocked when it shouldn't be.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).
This is obvious nonsense and should be rejected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The "driver" entry in the options QDict is now only missing if we're
opening an image with format probing.
We also catch cases now where both the drv argument and a "driver"
option is specified, e.g. by specifying -drive format=qcow2,driver=raw
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
All behavior and invariant should hold for images with 0 length, so
add a class to repeat all the tests in TestSingleDrive.
Hide two unapplicable test methods that would fail with 0 image length
because it's also used as cluster size.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There should be a BLOCK_JOB_READY event with active commit, regardless
of image length. Let's test the 0 length image case, and make sure it
goes through the ready->complete process.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Those options were not enabled by default, even when the build
environment would have supported them, so the corresponding
code was not compiled in normal test builds like on build bots.
[Building quorum by default "broke" qemu-iotests ./check 081. It turns
out the 081.out master output was just bitrotted. Fix this by updating
the error message.
--Stefan]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, test 089 uses $QEMU_IMG info manually in order to obtain the
according output. However, the iotests should generally use _img_info as
this filters out more irrelevant information such as the host image size
or format specific information. Therefore, test 089 should use _img_info
as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We should allow testing this on tmpfs. Any cache setting in iotests
should try to obey $CACHEMODE.
The cache mode is still "none" by default but overridable
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.
This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.
I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.
a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX
QCOW2 [off] [on] [unmap]
-----
runtime: 14secs 1.1secs 1.1secs
filesize: 937M 18M 18M
iSCSI [off] [on] [unmap]
----
runtime: 9.3s 0.9s 0.9s
b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct
QCOW2 [off] [on] [unmap]
-----
runtime: 246secs 18secs 18secs
filesize: 51G 192K 192K
throughput: 203M/s 2.3G/s 2.3G/s
iSCSI* [off] [on] [unmap]
----
runtime: 8mins 45secs 33secs
throughput: 106M/s 1.2G/s 1.6G/s
allocated: 100% 100% 0%
* The storage was connected via an 1Gbit interface.
It seems to internally handle writing zeroes
via WRITESAME16 very fast.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Like qcow2 since commit 6d33e8e7, error out on invalid lengths instead
of silently truncating them to 1023.
Also don't rely on bdrv_pread() catching integer overflows that make len
negative, but use unsigned variables in the first place.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
A huge image size could cause s->l1_size to overflow. Make sure that
images never require a L1 table larger than what fits in s->l1_size.
This cannot only cause unbounded allocations, but also the allocation of
a too small L1 table, resulting in out-of-bounds array accesses (both
reads and writes).
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Too large L2 table sizes cause unbounded allocations. Images actually
created by qemu-img only have 512 byte or 4k L2 tables.
To keep things consistent with cluster sizes, allow ranges between 512
bytes and 64k (in fact, down to 1 entry = 8 bytes is technically
working, but L2 table sizes smaller than a cluster don't make a lot of
sense).
This also means that the number of bytes on the virtual disk that are
described by the same L2 table is limited to at most 8k * 64k or 2^29,
preventively avoiding any integer overflows.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Huge values for header.cluster_bits cause unbounded allocations (e.g.
for s->cluster_cache) and crash qemu this way. Less huge values may
survive those allocations, but can cause integer overflows later on.
The only cluster sizes that qemu can create are 4k (for standalone
images) and 512 (for images with backing files), so we can limit it
to 64k.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
The test test_stream_pause in this class uses vm.pause_drive, which
requires a blkdebug driver on top of image, otherwise it's no-op and the
test running is undeterministic.
So add it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The shell script attempts to suppress core dumps like this:
old_ulimit=$(ulimit -c)
ulimit -c 0
$QEMU_IO arg...
ulimit -c "$old_ulimit"
This breaks the test hard unless the limit was zero to begin with!
ulimit sets both hard and soft limit by default, and (re-)raising the
hard limit requires privileges. Broken since it was added in commit
dc68afe.
Could be fixed by adding -S to set only the soft limit, but I'm not
sure how portable that is in practice. Simply do it in a subshell
instead, like this:
(ulimit -c 0; exec $QEMU_IO arg...)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for the JSON protocol driver.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for VHDX images created by Microsoft's tool, Disk2VHD.
VHDX images created by this tool have 2 identical header sections, with
identical sequence numbers. This makes sure we detect VHDX images with
identical headers, and do not flag them as corrupt.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit f915db07ef.
This commit is broken because it does not account for the
build tree and the source tree being different, and can cause
build failures for out-of-tree builds. Revert it until we can
identify a better solution to the problem.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1400153676-30180-1-git-send-email-peter.maydell@linaro.org
Acked-by: Kevin Wolf <kwolf@redhat.com>
This is an initial, simple live migration test from one
running VM to another, using monitor commands.
This is also an example of using the new common.qemu functions
for controlling multiple running qemu instances, for tests that
need a live qemu vm.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new functionality of common.qemu implements the QEMU control
and communication functionality that was originally in test 085.
This removes that now-duplicate functionality, and uses the
common.qemu functions.
The QEMU commandline changes slightly due to this; in addition to
monitor and qmp i/o options, the new QEMU commandline from inside
common.qemu now introduces -machine accel=qtest.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This creates some common functions for bash language qemu-iotests
to control, and communicate with, a running QEMU process.
4 functions are introduced:
1. _launch_qemu()
This launches the QEMU process(es), and sets up the file
descriptors and fifos for communication. You can choose to
launch each QEMU process listening for either QMP or HMP
monitor. You can call this function multiple times, and
save the handle returned from each. The returned handle is
in $QEMU_HANDLE. You must copy this value.
Commands 2 and 3 use the handle received from _launch_qemu(), to talk
to the appropriate process.
2. _send_qemu_cmd()
Sends a command string, specified by $2, to QEMU. If $3 is
non-NULL, _send_qemu_cmd() will wait to receive $3 as a
required result string from QEMU. Failure to receive $3 will
cause the test to fail. The command can optionally be retried
$qemu_cmd_repeat number of times. Set $qemu_error_no_exit
to not force the test the fail on exit; in this case,
$QEMU_STATUS[$1] will be set to -1 on failure.
3. _timed_wait_for()
Waits for a response, for up to a default of 10 seconds. If
$2 is not seen in that time (anywhere in the response), then
the test fails. Primarily used by _send_qemu_cmd, but could
be useful standalone, as well. To prevent automatic exit
(and therefore test failure), set $qemu_error_no_exit to a
non-NULL value. If $silent is a non-NULL value, then output
to stdout will be suppressed.
4. _cleanup_qemu()
Kills the running QEMU processes, and removes the fifos.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The immediately visible effect of this patch is that it fixes committing
a temporary snapshot to its backing file. Previously, it would fail with
a "permission denied" error because bdrv_inherited_flags() forced the
backing file to be read-only, ignoring the r/w reopen of bdrv_commit().
The bigger problem this revealed is that the original open flags must
actually only be applied to the temporary snapshot, and the original
image file must be treated as a backing file of the temporary snapshot
and get the right flags for that.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will return cluster_size and needs_compressed_writes to caller, if all the
extents have the same value (or there's only one extent). Otherwise return
-ENOTSUP.
cluster_size is only reported for sparse formats.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, QEMU's iotests rely on /usr/bin/env to start the correct
Python (that is, at least Python 2.4, but not 3). On systems where
Python 3 is the default, the user has no clean way of making the iotests
use the correct binary.
This commit makes the iotests use the Python selected by configure.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test which discards a compressed cluster on qcow2. This should
work without any problems.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both tests 019 and 086 need proper quotations to work with pathnames
that contain spaces.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The _rm_test_img() function in common.rc did not quote the image
file, which left droppings in the scratch directory (and performed
a potentially unsafe rm -f).
This adds the necessary quotes.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
