Add the drivers listed in audio_possible_drivers to audio_drv_list,
using the try-* variants. That way the probable drivers are compiled by
default if possible.
Additioal tweaks:
linux: reorder to: pa alsa sdl oss.
*bsd: drop pa.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190124112055.547-7-kraxel@redhat.com
For those audio drivers which can be probed (sdl, alsa, pulse) add a
try-$name variants. Unlike the variants without try- prefix they will
not error out on probe failure, the driver will be dropped from the list
instead. Mainly useful for the audio_drv_list default values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190124112055.547-3-kraxel@redhat.com
Use pkg-config to probe for alsa and pulseaudio.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190124112055.547-2-kraxel@redhat.com
Different versions of GCC and Clang use different versions of the C standard.
This repeatedly caused problems already, e.g. with duplicated typedefs:
https://lists.gnu.org/archive/html/qemu-devel/2018-11/msg05829.html
or with for-loop variable initializers:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg00237.html
To avoid these problems, we should enforce the C language version to the
same level for all compilers. Since our minimum compiler versions is
GCC v4.8, our best option is "gnu99" for C code right now ("gnu17" is not
available there yet, and "gnu11" is marked as "experimental"), and "gnu++98"
for the few C++ code that we have in the repository.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Modern desktop environments can render icons at very large sizes,
especially with high DPI screens. Providing a 32x32 pixel bitmap is
nowhere near sufficient anymore.
When displayed in GNOME shell the QEMU icon looks awful, having been
scaled up to at least x4 its base size. This is compounded by the fact
that the BMP file doesn't do transparency, so while we've removed white
pixels, we still have anti-aliased nearly-white pixels which make the
logo look appalling on black backgrounds.
Loading a high resolution PNG icon addresses both problems, but requires
use of the extra SDL2_image library.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The icon associated with a GtkWindow is just a hint to window managers
and not all of them will honour it. Some will instead want to show the
icon listed by the .desktop file. The desktop file is located based on
the application ID, which is set using g_set_prgname. QEMU has not
historically provided a desktop file or set its app ID, so it got a
broken icon in GNOME shell, which is now fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU currently installs logos to $prefix/share/qemu/ which means no GUI
toolkit or applications can find them by default.
The accepted standards for desktop applications declare that application
logos / icons should be installed under $prefix/share/icons, so use this
directory location.
Pre-rendered icons are provided at the standard sizes expected for GUI
applications, along with the scalable SVG, to ensure maximum portability.
The PNGs are rendered from the SVG using inkscape, however, this is not
wired up into the default make rules to avoid requiring inkscape as a
mandatory tool in build systems / developer workstations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We want to build our s390-ccw bios with -march=z900 so that it also
works with the oldest s390x CPU that we support with TCG. However,
Clang on s390x does not support -march=z900 anymore, so we can not
use this compiler to build the s390-ccw bios. Thus add a proper test
to the configure script to see whether the compiler is usable.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1547470346-18416-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Some functionality is dependent on the Python version
detected/configured on configure. While it's possible to run the
Python version later and check for the version, doing it once is
preferable. Also, it's a relevant information to keep in build logs,
as the overall behavior of the build can be affected by it.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181109150710.31085-2-crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- Various Travis updates
- "stable" SID snapshot for docker
- avoid :latest docker tags
- g_usleep fix for some tests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAlw8o9cACgkQ+9DbCVqe
KkSmMQf/TRnnbaf/SIrYpAA6yGcAJtEnAU8f/CH3idAkEPv3+UtTkdSHor1u3A2G
BJaplFhYTOL/BwjUl1sctGYa8jVR6e1SS2rLRtIG7d+DyvmpFJNx9gKEdSkAuwbk
BVNElqFfKCezQeM9IrjhzXd7InoW7PNQMrKRrMvuECddLc0Ds9CTvOSY1WUpOlDh
rTEjvVhPu8LdZkhie/0D+zAzv8++iUDdImd1w7m3ilVPtyMflhdtaQ1Qpv6M/ldW
cmbIIiGq2xsC126Piyq2gguCNV8nt/a8vGavkCCIXNZ07eWVRxoMuGzlvVBhX9qV
oll92Fs9R8ZBROz5qpt/Uqt1+rBjNg==
=XPd+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-140119-1' into staging
A bunch of fixes for testing:
- Various Travis updates
- "stable" SID snapshot for docker
- avoid :latest docker tags
- g_usleep fix for some tests
# gpg: Signature made Mon 14 Jan 2019 14:59:35 GMT
# gpg: using RSA key FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-140119-1: (21 commits)
Revert "tests: Disable qht-bench parallel test when using gprof"
tests: use g_usleep instead of rem = sleep(time)
tests/docker: remove SID_AGE test hack
tests/docker: update our Travis image
travis: bump to Xenial baseline
docker: Use a stable snapshot for Debian Sid
travis: remove matrix settings that duplicate global settings
travis: run tests in verbose mode
travis: stop using container based envs
travis: stop redefining the script commands
travis: use homebrew addon for MacOSX
travis: don't clone git submodules upfront
travis: standardize the syntax used for env variables
travis: define all the build matrix entries in one place
travis: add whitespace between each major section & matrix entry
tests: use in-place sed magic for enabling deb-src in travis image
tests: update Fedora i386 cross image to Fedora 29
tests: update Fedora dockerfile to use Fedora 29
tests: remove obsolete 'debian' dockerfile
tests: run ldconfig after installing extra software
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is broken since Xen 4.9 [1] and it will not build in Xen 4.12. Also,
it is not built by default since QEMU 2.6.
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-09/msg00313.html
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Travis CI jobs are failing because of test-qht-par when gprof is
enabled. Temporarily disable test-qht-par if gprof is enabled,
until we fix the bug.
-----BEGIN PGP SIGNATURE-----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=RksQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Work around test-qht-par + gprof issues
Travis CI jobs are failing because of test-qht-par when gprof is
enabled. Temporarily disable test-qht-par if gprof is enabled,
until we fix the bug.
# gpg: Signature made Fri 11 Jan 2019 18:23:29 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
tests: Disable qht-bench parallel test when using gprof
configure: Let the TARGET_GPROF var use the regular 'y' for Yes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test is failing on the Travis CI [*] since some time now,
disable it until it get fixed.
[*] https://travis-ci.org/qemu/qemu/builds/474821674
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190103150951.17592-3-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All other variables are set using 'y', which is what the rules.mak
functions expect to parse.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190103150951.17592-2-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This removes some clutter in compilation logging, and allows some
easier tweaking per compilation unit/CFLAGS overriding.
Note that we can't move those define in os-win32.h, since they must be
set before the first system headers are included.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.
(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")
According to repology, all the distros that are build target platforms
for QEMU include it:
RHEL-7: 0.14.0
Debian (Stretch): 0.12.8
Debian (Jessie): 0.12.5
FreeBSD (ports): 0.14.0
OpenSUSE Leap 15: 0.14.0
Ubuntu (Xenial): 0.12.6
Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SLOF receives a device tree and updates it with various properties
before switching to the guest kernel and QEMU is not aware of any changes
made by SLOF. Since there is no real RTAS (QEMU implements it), it makes
sense to pass the SLOF final device tree to QEMU to let it implement
RTAS related tasks better, such as PCI host bus adapter hotplug.
Specifially, now QEMU can find out the actual XICS phandle (for PHB
hotplug) and the RTAS linux,rtas-entry/base properties (for firmware
assisted NMI - FWNMI).
This stores the initial DT blob in the sPAPR machine and replaces it
in the KVMPPC_H_UPDATE_DT (new private hypercall) handler.
This adds an @update_dt_enabled machine property to allow backward
migration.
SLOF already has a hypercall since
https://github.com/aik/SLOF/commit/e6fc84652c9c0073f9183
This makes use of the new fdt_check_full() helper. In order to allow
the configure script to pick the correct DTC version, this adjusts
the DTC presense test.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
macOS provides pthread_setname_np that doesn't have thread id argument.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <52160afacecc5b109dc43a412fa3e74ddd6277fb.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
-----BEGIN PGP SIGNATURE-----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=XKq9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Decompression worker threads
- dmg: lzfse compression support
- file-posix: Simplify delegation to worker thread
- Don't pass flags to bdrv_reopen_queue()
- iotests: make 235 work on s390 (and others)
# gpg: Signature made Fri 14 Dec 2018 10:55:09 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (42 commits)
block/mirror: add missing coroutine_fn annotations
iotests: make 235 work on s390 (and others)
block: Assert that flags are up-to-date in bdrv_reopen_prepare()
block: Remove assertions from update_flags_from_options()
block: Stop passing flags to bdrv_reopen_queue_child()
block: Remove flags parameter from bdrv_reopen_queue()
block: Clean up reopen_backing_file() in block/replication.c
qemu-io: Put flag changes in the options QDict in reopen_f()
block: Drop bdrv_reopen()
block: Use bdrv_reopen_set_read_only() in the mirror driver
block: Use bdrv_reopen_set_read_only() in external_snapshot_commit()
block: Use bdrv_reopen_set_read_only() in qmp_change_backing_file()
block: Use bdrv_reopen_set_read_only() in stream_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_commit()
block: Use bdrv_reopen_set_read_only() in commit_start/complete()
block: Use bdrv_reopen_set_read_only() in bdrv_backing_update_filename()
block: Add bdrv_reopen_set_read_only()
file-posix: Avoid aio_worker() for QEMU_AIO_IOCTL
file-posix: Switch to .bdrv_co_ioctl
file-posix: Remove paio_submit_co()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit includes the support to lzfse opensource library. With this
library dmg block driver can decompress images with this type of
compression inside.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we require at least GCC 4.8, we don't need this als workaround
for 4.6 and 4.7 anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since we have got a check for Clang >= 3.4 now, we do not need to
check for older Clang versions in the configure test for 128-bit ints
anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
So far we only had implicit requirements for the minimum compiler version,
e.g. we require at least GCC 4.1 for the support of atomics. However,
such old compiler versions are not tested anymore by the developers, so
they are not really supported anymore. Since we recently declared explicitly
what platforms we intend to support, we can also get more explicit on the
compiler version now. The supported distributions use the following version
of GCC:
RHEL-7: 4.8.5
Debian (Stretch): 6.3.0
Debian (Jessie): 4.8.4
OpenBSD (ports): 4.9.4
FreeBSD (ports): 8.2.0
OpenSUSE Leap 15: 7.3.1
Ubuntu (Xenial): 5.3.1
macOS (Homebrew): 8.2.0
So we can safely assume GCC 4.8 these days. For Clang, the situation is
a little bit more ambiguous, since it is sometimes not available in the
main distros but rather third party repositories. At least Debian Jessie
uses version 3.5, and EPEL7 for RHEL7 uses 3.4, so let's use 3.4 as
minimum Clang version now - we still can adjust this later if necessary.
Unfortunately Apple uses different version numbers for the Clang that is
included in their Xcode suite, so we need to check the version numbers
for Xcode separately. Xcode 5.1 seems to be the first one that has been
shipped with LLVM 3.4, so use this version as the minimum there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
POSIX requires $PWD to be reliable, and we expect all
shells used by qemu scripts to be relatively close to
POSIX. Thus, it is smarter to avoid forking the pwd
executable for something that is already available in
the environment.
So replace it with the following:
sed -i 's/\(`pwd`\|\$(pwd)\)/$PWD/g' $(git grep -l pwd)
Then delete a pointless line assigning PWD to itself.
Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: eblake@redhat.com
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20181024094051.4470-2-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message, reorder series, tweak a couple more files]
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds configure options to control the following block drivers:
* Bochs
* Cloop
* Dmg
* Qcow (V1)
* Vdi
* Vvfat
* qed
* parallels
* sheepdog
Each of these defaults to being enabled.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20181107063644.2254-1-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A few places in configure were doing ad-hoc calls to
the symlink function to set up symlinks from the build tree
back to the source tree. We have a loop that does this
already for all files and directories listed in the LINKS
environment variable; use that instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The FILES variable is used to accumulate a list of things to symlink
from the source tree into the build tree. These don't have to be
individual files; symlinking an entire directory of data files is
also fine. Rename it to something less confusing before we add a few
directories to it.
Improve the comment to clarify what DIRS and LINKS do and why
it's not a good idea to add things to LINKS with wildcarding.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently tests/hex-loader-check-data contains data files used
by the hexloader-test, and configure individually symlinks those
data files into the build directory using a wildcard.
Using a wildcard like this is a bad idea, because if a new
data file is added, nothing causes configure to be rerun,
and so no symlink is added for the new file. This can cause
tests to spuriously fail when they can't find their data.
Instead, it's better to symlink an entire directory of
data files. We already have such a directory: tests/data.
Move the data files from tests/hex-loader-check-data/ to
tests/data/hex-loader/, and remove the unnecessary symlinking.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently tests/acpi-test-data contains data files used by the
bios-tables-test, and configure individually symlinks those
data files into the build directory using a wildcard.
Using a wildcard like this is a bad idea, because if a new
data file is added, nothing causes configure to be rerun,
and so no symlink is added for the new file. This can cause
tests to spuriously fail when they can't find their data.
Instead, it's better to symlink an entire directory of
data files. We already have such a directory: tests/data.
Move the data files from tests/acpi-test-data/ to
tests/data/acpi/, and remove the unnecessary symlinking.
We can remove entirely the note in rebuild-expected-aml.sh
about copying any new data files, because now they will
be in the source directory, not the build directory, and
no copying is required.
(We can't just change the existing tests/acpi-test-data/
to being a symlinked directory, because if we did that and
a developer switched git branches from one after that change
to one before it then configure would end up trashing all
the test files by making them symlinks to themselves.
Changing their path avoids this annoyance.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* support for --retry-path option for recovering from communication
path failures
* support for serial/device name in guest-get-fsinfo for linux/w32
* support for freezing individual mount points in guest-fsfreeze-*
* fixes for unicode paths on w32, not-present vcpus in guest-get-vcpus,
buffer overflow in guest-get-fsinfo for w32, and other minor fixes
v3:
* remove redundant check for --static in configure
* correct authorship on "qga-win: add debugging information"
v2:
* set libudev=off in configure for static builds
-----BEGIN PGP SIGNATURE-----
iQFOBAABCgA4FiEEzqzJ4VU066u4LT+gM1PJzvEItYQFAlvZuKYaHG1kcm90aEBs
aW51eC52bmV0LmlibS5jb20ACgkQM1PJzvEItYT4Agf+NdHTXor+hT8A8D/Tk2bf
3lU3F/PsdS+jY19IPrvXzBAZ2Hh96rHPRceTJKw4AbUHtTN6mYK2Hz1FQw5Pauya
u3rmqZfW4P4noyeLgHR3bnVJ5729lJEtJ2DBKIbX3fYpYCVAvUubZesL/dSnFUhf
DdMvYXaZl3O943E+RgheM/y1SxYr4lB69Nrk6SMtg0jxGYWJt594JttJRJ97ShUv
6Y4NPZev5caUy+0ozSJopi92TEh2oIe71pJ97Ap0quKI3ENSYgc2OylnGnxUzJZl
FdAs994WtEZJeTUaBxrMGytl3TQzosMEtPMhXZJn1P0Odyx0ziQCQy+zVbo5+XPY
vQ==
=drMH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2018-10-30-v3-tag' into staging
qemu-ga patch queue for soft-freeze
* support for --retry-path option for recovering from communication
path failures
* support for serial/device name in guest-get-fsinfo for linux/w32
* support for freezing individual mount points in guest-fsfreeze-*
* fixes for unicode paths on w32, not-present vcpus in guest-get-vcpus,
buffer overflow in guest-get-fsinfo for w32, and other minor fixes
v3:
* remove redundant check for --static in configure
* correct authorship on "qga-win: add debugging information"
v2:
* set libudev=off in configure for static builds
# gpg: Signature made Wed 31 Oct 2018 14:13:58 GMT
# gpg: using RSA key 3353C9CEF108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
# Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584
* remotes/mdroth/tags/qga-pull-2018-10-30-v3-tag: (24 commits)
qga-win: changing --retry-path option behavior
qga-win: report specific error when failing to open channel
qga-win: install service with --retry-path set by default
qga: add --retry-path option for re-initializing channel on failure
qga: move w32 service handling out of run_agent()
qga: hang GAConfig/socket_activation off of GAState global
qga: group agent init/cleanup init separate routines
qga: fix an off-by-one issue
qga-win: demystify namespace stripping
qga-win: return disk device in guest-get-fsinfo
qga-win: handle multi-disk volumes
qga-win: refactor disk info
qga-win: report disk serial number
qga-win: refactor disk properties (bus)
qga-win: add debugging information
build: rename CONFIG_QGA_NTDDDISK to CONFIG_QGA_NTDDSCSI
qga-win: fsinfo: pci-info: allow partial info
qga-win: prevent crash when executing fsinfo command
qga: linux: return disk device in guest-get-fsinfo
qga: linux: report disk serial number
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There was inconsistency between commits:
50cbebb9a3 configure: add configure check for ntdddisk.h
a3ef3b2272 qga: added bus type and disk location path
The first commit added #define CONFIG_QGA_NTDDDISK but the second commit
expected the name to be CONFIG_QGA_NTDDSCSI. As a result the code in
second patch was never used.
Renaming the option to CONFIG_QGA_NTDDSCSI to match the name of header
file that is being checked for.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is needed for builds with the mingw64-* packages from Cygwin,
but also works for Linux.
Move the zlib test also more to the end because users should
get information on the really important missing packages
(which also require zlib) first.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180712192603.11599-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add disassembler support for nanoMIPS.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Matthew Fortune <matthew.fortune@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The configure script detects if the compiler has AVX2 support and
automatically sets avx2_opt="yes" which in turn defines CONFIG_AVX2_OPT.
There is no way of explicitly overriding this setting so this commit adds
two command-line options: --enable-avx2 and --disable-avx2.
The default behaviour, when no option is specified, is to maintain the
current behaviour and enable AVX2 if the compiler supports it.
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Darren Kenny <Darren.Kenny@oracle.com>
Reviewed-by: Mark Kanda <Mark.Kanda@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- request bflt support in configure;
- implement custom linux-user/xtensa/target_flat.h that doesn't put envp
on stack;
- fix #include "target_flat.h" in flatload.c so that it first search for
arch-customized version of the header.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
nettle 2.7.1 was released in 2013 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 2.7.1
Debian (Stretch): 3.3
Debian (Jessie): 2.7.1
OpenBSD (ports): 3.4
FreeBSD (ports): 3.4
OpenSUSE Leap 15: 3.4
Ubuntu (Xenial): 3.2
macOS (Homebrew): 3.4
Based on this, it is reasonable to require nettle >= 2.7.1 in QEMU
which allows for some conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation for adding user mode emulation support for the
Linux usbfs interface, check for its kernel header.
Signed-off-by: Cortland Tölva <cst@tolva.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20181008163521.17341-2-cst@tolva.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
libgcrypt 1.5.0 was released in 2011 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 1.5.3
Debian (Stretch): 1.7.6
Debian (Jessie): 1.6.3
OpenBSD (ports): 1.8.2
FreeBSD (ports): 1.8.3
OpenSUSE Leap 15: 1.8.2
Ubuntu (Xenial): 1.6.5
macOS (Homebrew): 1.8.3
Based on this, it is reasonable to require libgcrypt >= 1.5.0 in QEMU
which allows for some conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
gnutls 3.0.0 was released in 2011 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 3.1.18
Debian (Stretch): 3.5.8
Debian (Jessie): 3.3.8
OpenBSD (ports): 3.5.18
FreeBSD (ports): 3.5.18
OpenSUSE Leap 15: 3.6.2
Ubuntu (Xenial): 3.4.10
macOS (Homebrew): 3.5.19
Based on this, it is reasonable to require gnutls >= 3.1.18 in QEMU
which allows for all conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
