Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The error message on invalid blkdebug events changes from
qemu-system-x86_64: LOCATION: Invalid event name "VALUE"
to
qemu-system-x86_64: LOCATION: invalid parameter value: VALUE
Slight degradation, but the message is sub-par even before the patch.
When complaining about a parameter value, both parameter name and
value should be mentioned, as the value may well not be unique. Left
for another day.
Also left is the error message's unhelpful location: it points to the
config=FILENAME rather than into that file.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-11-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, commit message rewritten]
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-8-git-send-email-armbru@redhat.com>
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Without a passthrough status of BDRV_BLOCK_RAW, anything wrapped by
blkdebug appears 100% allocated as data. Better is treating it the
same as the underlying file being wrapped.
Update iotest 177 for the new expected output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bs->exact_filename field may not be sufficient to store the full
blkdebug node filename. In this case, we should not generate a filename
at all instead of an unusable one.
Cc: qemu-stable@nongnu.org
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613172006.19685-2-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related
functions (and some others) to 'int bytes', as they both refer to bytes.
This helps with code legibility.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make it easier to simulate various unusual hardware setups (for
example, recent commits 3482b9b and b8d0a98 affect the Dell
Equallogic iSCSI with its 15M preferred and maximum unmap and
write zero sizing, or b2f95fe deals with the Linux loopback
block device having a max_transfer of 64k), by allowing blkdebug
to wrap any other device with further restrictions on various
alignments.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-9-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Rather than store into a local variable, then copy to the struct
if the value is valid, then reporting errors otherwise, it is
simpler to just store into the struct and report errors if the
value is invalid. This however requires that the struct store
a 64-bit number, rather than a narrower type. Likewise, setting
a sane errno value in ret prior to the sequence of parsing and
jumping to out: on error makes it easier for the next patch to
add a chain of similar checks.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170429191419.30051-8-eblake@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In order to test the effects of artificial geometry constraints
on operations like write zero or discard, we first need blkdebug
to manage these actions. It also allows us to inject errors on
those operations, just like we can for read/write/flush.
We can also test the contract promised by the block layer; namely,
if a device has specified limits on alignment or maximum size,
then those limits must be obeyed (for now, the blkdebug driver
merely inherits limits from whatever it is wrapping, but the next
patch will further enhance it to allow specific limit overrides).
This patch intentionally refuses to service requests smaller than
the requested alignments; this is because an upcoming patch adds
a qemu-iotest to prove that the block layer is correctly handling
fragmentation, but the test only works if there is a way to tell
the difference at artificial alignment boundaries when blkdebug is
using a larger-than-default alignment. If we let the blkdebug
layer always defer to the underlying layer, which potentially has
a smaller granularity, the iotest will be thwarted.
Tested by setting up an NBD server with export 'foo', then invoking:
$ ./qemu-io
qemu-io> open -o driver=blkdebug blkdebug::nbd://localhost:10809/foo
qemu-io> d 0 15M
qemu-io> w -z 0 15M
Pre-patch, the server never sees the discard (it was silently
eaten by the block layer); post-patch it is passed across the
wire. Likewise, pre-patch the write is always passed with
NBD_WRITE (with 15M of zeroes on the wire), while post-patch
it can utilize NBD_WRITE_ZEROES (for less traffic).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-7-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Rather than repeat the logic at each caller of checking if a Rule
exists that warrants an error injection, fold that logic into
inject_error(); and rename it to rule_check() for legibility.
This will help the next patch, which adds two more callers that
need to check rules for the potential of injecting errors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-6-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commits 04ed95f4 and 1a62d0ac updated the block layer to auto-fragment
any I/O to fit within device boundaries. Additionally, when using a
minimum alignment of 4k, we want to ensure the block layer does proper
read-modify-write rather than requesting I/O on a slice of a sector.
Let's enforce that the contract is obeyed when using blkdebug. For
now, blkdebug only allows alignment overrides, and just inherits other
limits from whatever device it is wrapping, but a future patch will
further enhance things.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-5-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have macros in place to make it less verbose to add a subtype
of QObject to both QDict and QList. While we have made cleanups
like this in the past (see commit fcfcd8ffc, for example), having
it be automated by Coccinelle makes it easier to maintain.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then I verified that no manual touchups were required.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The block layer takes care of removing the bs->file child if the block
driver's bdrv_open()/bdrv_file_open() implementation fails. The block
driver therefore does not need to do so, and indeed should not unless it
sets bs->file to NULL afterwards -- because if this is not done, the
bdrv_unref_child() in bdrv_open_inherit() will dereference the freed
memory block at bs->file afterwards, which is not good.
We can now decide whether to add a "bs->file = NULL;" after each of the
offending bdrv_unref_child() invocations, or just drop them altogether.
The latter is simpler, so let's do that.
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers will have to request permissions for all of their child
nodes. Block drivers that act as simply filters can use the default
implementation of .bdrv_child_perm().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Keep the coroutine on the same AioContext. Without this change,
there would be a race between yielding the coroutine and reentering it.
While the race cannot happen now, because the code only runs from a single
AioContext, this will change with multiqueue support in the block layer.
While doing the change, replace custom bottom half with aio_co_schedule.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-10-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This enables byte granularity requests for blkdebug, and at the same
time gets us rid of another user of the BDS-level AIO emulation.
Note that unless align=512 is specified, this can behave subtly
different from the old behaviour because bdrv_co_preadv/pwritev don't
have to perform alignment adjustments any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This simplifies bottom half handlers by removing calls to qemu_bh_delete and
thus removing the need to stash the bottom half pointer in the opaque
datum.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Store the configuration file's filename so it can later be used in
bdrv_refresh_filename() without having to directly access the options
QDict which may contain a value of a non-string type.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In practice the entry argument is always known at creation time, and
it is confusing that sometimes qemu_coroutine_enter is used with a
non-NULL argument to re-enter a coroutine (this happens in
block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value
at creation time, for consistency with e.g. aio_bh_new.
Mostly done with the following semantic patch:
@ entry1 @
expression entry, arg, co;
@@
- co = qemu_coroutine_create(entry);
+ co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry2 @
expression entry, arg;
identifier co;
@@
- Coroutine *co = qemu_coroutine_create(entry);
+ Coroutine *co = qemu_coroutine_create(entry, arg);
...
- qemu_coroutine_enter(co, arg);
+ qemu_coroutine_enter(co);
@ entry3 @
expression entry, arg;
@@
- qemu_coroutine_enter(qemu_coroutine_create(entry), arg);
+ qemu_coroutine_enter(qemu_coroutine_create(entry, arg));
@ reentry @
expression co;
@@
- qemu_coroutine_enter(co, NULL);
+ qemu_coroutine_enter(co);
except for the aforementioned few places where the semantic patch
stumbled (as expected) and for test_co_queue, which would otherwise
produce an uninitialized variable warning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It makes more sense to have ALL block size limit constraints
in the same struct. Improve the documentation while at it.
Simplify a couple of conditionals, now that we have audited and
documented that request_alignment is always non-zero.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to eventually stick request_alignment alongside other
BlockLimits, but first, we must ensure it is populated at the
same time as all other limits, rather than being a special case
that is set only when a block is first opened.
Note that when the user does not provide "align", then we were
defaulting to bs->request_alignment - but at this stage in the
initialization, that was always 512. We were also rejecting an
explicit "align":0 from the user; this patch now allows that,
as an explicit request for the default alignment (which may not
always be 512 in the future).
qemu-iotests 77 is particularly sensitive to the fact that we
can specify an artificial alignment override in blkdebug, and
that override must continue to work even when limits are
refreshed on an already open device.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just reopening the children (as block.c does now) is enough.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
In order to decide whether a blkdebug: filename can be produced or a
json: one is necessary, blkdebug checked whether bs->options had more
options than just "config", "x-image" or "image" (the latter including
nested options). That doesn't work well when generic block layer options
are present.
This patch passes an option QDict to the driver that contains only
driver-specific options, i.e. the options for the general block layer as
well as child nodes are already filtered out. Works much better this
way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No need to keep two separate enums, where editing one is likely
to forget the other. Now that we can specify a qapi enum prefix,
we don't even have to change the bulk of the uses.
get_event_by_name() could perhaps be replaced by qapi_enum_parse(),
but I left that for another day.
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
make check always outputs warnings, this
is not nice. Disable blkdebug warnings under qtest.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1448883874-17933-1-git-send-email-mst@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The word "backing file" nowadays refers to the backing_hd in the
external snapshot sense (i.e. bs->backing_hd), instead of the file sense
(bs->file). Correct the comment to use the right term.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes the temporary duplication between bs->file and
bs->file_child by converting everything to BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of letting every caller of bdrv_open() determine the right flags
for its child node manually and pass them to the function, pass the
parent node and the role of the newly opened child (like backing file,
protocol layer, etc.).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values. Funky :)
The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:
* qemu_add_globals()'s callback qdev_add_one_global()
* qemu_config_write()'s callback config_write_opts()
* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
vnc_init_func()
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
This is, amongst others, required for qemu-iotests 033 to run as
intended on VHDX, which uses explicit bdrv_truncate() calls to bs->file
when allocating new blocks.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Background:
The blkdebug scripts are currently engineered so that when a debug
event occurs, a prefilter browses a master list of parsed rules for a
certain event and adds them to an "active list" of rules to be used for
the forthcoming action, provided the events and state numbers match.
Then, once the request is received, the last active rule is used to
inject an error if certain parameters match.
This active list is cleared every time the prefilter injects a new
rule for the first time during a debug event.
The "once" rule currently causes the error injection, if it is
triggered, to only clear the active list. This is insufficient for
preventing future injections of the same rule.
Remedy:
This patch /deletes/ the rule from the list that the prefilter
browses, so it is gone for good. In V2, we remove only the rule of
interest from the active list instead of allowing the "once" rule to
clear the entire list of active rules.
Impact:
This affects iotests 026. Several ENOSPC tests that used "once" can
be seen to have output that shows multiple failure messages. After
this patch, the error messages tend to be smaller and less severe, but
the injection can still be seen to be working. I have patched the
expected output to expect the smaller error messages.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1423257977-25630-1-git-send-email-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of actually recreating the options from scratch, just reuse the
options given for creating the BDS, which are the configuration file
name and additional options. In case there are no additional options we
can thus create a plain filename.
This obviously results in a different output for qemu-iotest 099 which
exactly tests this filename generation. Fix it up as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1415697825-26678-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_make_empty() is currently only called if the current image
represents an external snapshot that has been committed to its base
image; it is therefore unlikely to have internal snapshots. In this
case, bdrv_make_empty() can be greatly sped up by emptying the L1 and
refcount table (while having the dirty flag set, which only works for
compat=1.1) and creating a trivial refcount structure.
If there are snapshots or for compat=0.10, fall back to the simple
implementation (discard all clusters).
[Applied s/clusters/cluster/ typo fix suggested by Eric Blake
--Stefan]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
