Based on a mail on the qemu-devel mailing list at
https://lists.nongnu.org/archive/html/qemu-devel/2020-05/msg02909.html
and some internet research the GTK3 versions on supported
platforms are:
RHEL-7.4: 3.22.10
RHEL-7.5: 3.22.26
Debian (Stretch): 3.22.11
Debian (Buster): 3.24.5
OpenBSD (Ports): 3.22.30
FreeBSD (Ports): 3.22.29
OpenSUSE Leap 15: 3.22.30
SLE12-SP2: Unknown
SLE15: 3.22.30
Ubuntu (Bionic): 3.22.30
Ubuntu (Focal): 3.24.18
macOS (Homebrew): 3.22.30
This justifies increasing the minimum required GTK version in
QEMU to 3.22.0.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-11-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GDB's remote protocol requires M-profile cores to use the feature
name 'org.gnu.gdb.arm.m-profile' instead of the 'org.gnu.gdb.arm.core'
feature used for A- and R-profile cores. We weren't doing this, which
meant GDB treated our M-profile cores like A-profile ones. This mostly
doesn't matter, but for instance means that it doesn't correctly
handle backtraces where an M-profile exception frame is involved.
Ship a copy of GDB's arm-m-profile.xml and use it on the M-profile
cores. The integer registers have the same offsets as the
arm-core.xml, but register 25 is the M-profile XPSR rather than the
A-profile CPSR, so we need to update arm_cpu_gdb_read_register() and
arm_cpu_gdb_write_register() to handle XSPR reads and writes.
Fixes: https://bugs.launchpad.net/qemu/+bug/1877136
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200507134755.13997-1-peter.maydell@linaro.org
zstd significantly reduces cluster compression time.
It provides better compression performance maintaining
the same level of the compression ratio in comparison with
zlib, which, at the moment, is the only compression
method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just
installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G
The test was conducted with brd disk to reduce the influence
of disk subsystem to the test results.
The results is given in seconds.
compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.img
compression decompression
zlib zstd zlib zstd
------------------------------------------------------------
real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
user 65.0 15.8 5.3 2.5
sys 3.3 0.2 2.0 2.0
Both ZLIB and ZSTD gave the same compression ratio: 1.57
compressed image size in both cases: 1.4G
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-4-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently "cf-core.xml" is sent to GDB when using any m68k flavor. Thing is
it uses the "org.gnu.gdb.coldfire.core" feature name and gdb 8.3 then expects
a coldfire FPU instead of the default m68881 FPU.
This is not OK because the m68881 floats registers are 96 bits wide so it
crashes GDB with the following error message:
(gdb) target remote localhost:7960
Remote debugging using localhost:7960
warning: Register "fp0" has an unsupported size (96 bits)
warning: Register "fp1" has an unsupported size (96 bits)
...
Remote 'g' packet reply is too long (expected 148 bytes, got 180 bytes): \
00000000000[...]0000
With this patch: qemu-system-m68k -M none -cpu m68020 -s -S
(gdb) tar rem :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x00000000 in ?? ()
(gdb) p $fp0
$1 = nan(0xffffffffffffffff)
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1588094279-17913-3-git-send-email-frederic.konrad@adacore.com>
Message-Id: <20200430190122.4592-10-alex.bennee@linaro.org>
As gdb will generally be talking to "foreign" guests lets use that if
we can. Otherwise the chances of gdb barfing are considerably higher.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200430190122.4592-2-alex.bennee@linaro.org>
It seems on some compilers the test can pass but still give you
broken binaries.
Fixes: d2cd29e307
Fixes: https://bugs.launchpad.net/qemu/+bug/1871798
Cc: Bug 1871798 <1871798@bugs.launchpad.net>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Tested-by: James Le Cuirot <chewi@aura-online.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-9-alex.bennee@linaro.org>
Otherwise it's hard to debug whats going on.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-8-alex.bennee@linaro.org>
If we are not making warnings fatal for compilation, make them
non-fatal when building the Sphinx documentation also. (For instance
Sphinx 3.0 warns about some constructs that older versions were happy
with, which is a build failure if we use the warnings-as-errors
flag.)
This provides a workaround at least for LP:1872113.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200411182934.28678-2-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Without -Werror, the probe may succeed, but then compilation fails
later when -Werror is added for other reasons. Shows up on windows,
where the compiler complains about -fPIC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200401214756.6559-1-richard.henderson@linaro.org>
Message-Id: <20200403191150.863-13-alex.bennee@linaro.org>
Recent toolchains support static and pie at the same time.
As with normal dynamic builds, allow --static to default to PIE
if supported by the toolchain. Allow --enable/--disable-pie to
override the default.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Fix --disable-pie --static
v3: Update for QEMU_LDFLAGS.
Some distributions, e.g. Ubuntu 19.10, enable PIE by default.
If for some reason one wishes to build a non-pie binary, we
must provide additional options to override.
At the same time, reorg the code to an elif chain.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Update for QEMU_LDFLAGS.
There is nothing about these options that is related to PIE.
Use them unconditionally.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fangrui Song <i@maskray.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Do not split into two tests.
v3: Update to QEMU_LDFLAGS.
The CFLAGS_NOPIE and LDFLAGS_NOPIE variables are used
in pc-bios/optionrom/Makefile, which has nothing to do
with the PIE setting of the main qemu executables.
This overrides any operating system default to build
all executables as PIE, which is important for ROMs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PIE is supported on many other hosts besides x86.
The default for non-x86 is now the same as x86: pie is used
if supported, and may be forced via --enable/--disable-pie.
The original commit (40d6444e91) said:
"Non-x86 are not changed, as they require TCG changes"
but I think that's wrong -- there's nothing about PIE that
affects TCG one way or another.
Tested on aarch64 (bionic) and ppc64le (centos 7) hosts.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adjustment was random and unnecessary. The user mode
startup code in probe_guest_base() will choose a value for
guest_base that allows the host qemu binary to not conflict
with the guest binary.
With modern distributions, this isn't even used, as the default
is PIE, which does the same job in a more portable way.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Remove mention of config-host.ld from make distclean
While debugging check-acceptance failures I found an instability in
the mips64el test case. Briefly the test case:
retry.py -n 100 -c -- ./mips64el-softmmu/qemu-system-mips64el \
-display none -vga none -serial mon:stdio \
-machine malta -kernel ./vmlinux-4.7.0-rc1.I6400 \
-cpu I6400 -smp 8 -vga std \
-append "printk.time=0 clocksource=GIC console=tty0 console=ttyS0 panic=-1" \
--no-reboot
Reports about a 9% failure rate:
Results summary:
0: 91 times (91.00%), avg time 5.547 (0.45 varience/0.67 deviation)
-6: 9 times (9.00%), avg time 3.394 (0.02 varience/0.13 deviation)
Ran command 100 times, 91 passes
When re-run with "--accel tcg,thread=single" the instability goes
away.
Results summary:
0: 100 times (100.00%), avg time 17.318 (249.76 varience/15.80 deviation)
Ran command 100 times, 100 passes
Which seems to indicate there is some aspect of the MIPS MTTCG fixes
that has been missed. Ideally we would fix that but I'm afraid I don't
have time to investigate and am not super familiar with the
architecture anyway. In lieu of someone tracking down the failure lets
disable it for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <20200323161514.23952-7-alex.bennee@linaro.org>
This patch fixes two problems:
- it cleanups linux-user variants (for instance ppc64-linux-user
and ppc64le-linux-user)
- it removes the .o file when it removes the .d file, otherwise the .o
file is never updated
Fixes: 5f29856b85 ("linux-user, configure: improve syscall_nr.h dependencies checking")
Fixes: 4d6a835dea ("linux-user: introduce parameters to generate syscall_nr.h")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200325075757.1959961-1-laurent@vivier.eu>
This is mostly a fix for in-tree build.
It removes errors on .d directories:
grep: ./.gitlab-ci.d: Is a directory
grep: ./scripts/qemu-guest-agent/fsfreeze-hook.d: Is a directory
and improves performance by only checking <ARCH>-linux-user directories.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200323114116.163609-1-laurent@vivier.eu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Copy syscall_n32.tbl, syscall_n64.tbl and syscallhdr.sh from
linux/arch/parisc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offsets (6000 for n32 and 5000 for n64) from the file to
the Makefile.objs to be passed to syscallhdr.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-18-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/mips/kernel/syscalls/syscall_o32.tbl v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offset (4000) from the file to the Makefile.objs to be passed
to syscallhdr.sh
Rename on the fly fadvise64 to fadvise64_64.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-17-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/ppc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
and to not generate the entry if entry point is sys_ni_syscall.
Fix ppc/signal.c to define do_sigreturn() for TARGET_ABI32.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-10-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/arm/tools/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Update syscall.c to manage TARGET_NR_arm_sync_file_range as it has
replaced TARGET_NR_sync_file_range2
Move existing stuff from linux-user/Makefile.objs to
linux-user/arm/Makefile.objs
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200310103403.3284090-9-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will be used when we'll import syscall.tbl from the kernel
Add a script to remove all the dependencies to syscall_nr.h
that point to source directory and not to the build directory.
The list of arch will be update while the generated files are added.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
architecture emulation, developed by Yoshinori Sato.
CI jobs results:
https://gitlab.com/philmd/qemu/pipelines/127886344https://travis-ci.org/github/philmd/qemu/builds/664579420
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAl50mpQACgkQ4+MsLN6t
wN62zw//Y3ZRo9wYFIeILtDJzIzLRuZwmF1lN7j6o15gdwyjWjn08N4wsM/kyPPH
hdF6faWYIoiAaxe5IHzI4dxhH+Mv6zyae1gpOVOAO4TzF1HNpdILrCBvQbJQu2lF
jpqXBDeaa/4ugniANzSTVhCcelIdIoI56rV+E3hzgdoDxOrveA1m0NUGMGzSayEh
xT+y/oaTfmgJHI9GBwSJFVTrI1+jMp6VnrOv5I0pZrE55g1IiZ0TTK12JheQMFvS
98MHFZ1PiKIJEVzEQTBra0T8hbTsZLETn35mOgt9Kf3YRN4Cgqel6gFGlgtXUs5z
8u+pVDb8cK4+hcyFs0FLtUqWO+SXMF215zT23ra/ebhcC2pQRVHlqOjlI85aaJnf
7VfLJFMd3U4tl/yqbkcmkkjc1zl0IQjaa2mLaS+xstWAXGEqeP8EGdhIIzxtHBgQ
1RgHzjbTYMenCisUwzvH9+I7Wc9LB8Vik1UrebbCju99zwt/cIG3FSlleSiuKbtX
U5prRyBw4xyIe1IwcBUcuEBtibD473eBP/m2nF6TorHE0rH1X0n644aHSlTZhGoM
G/GvMZ45zHGlOouqYHX81vzR/WfRBYNiFcXHkJ0Im4zkvpXEnsvoTei9wt2QQ1Wi
YyHKxQUQo8OvBHR4QMUXbS2XVR0tv43NtDiR4mz+vhjC7eDCVc8=
=mNmV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/target_renesas_rx-20200320' into staging
Introduce the architectural part of the Renesas RX
architecture emulation, developed by Yoshinori Sato.
CI jobs results:
https://gitlab.com/philmd/qemu/pipelines/127886344https://travis-ci.org/github/philmd/qemu/builds/664579420
# gpg: Signature made Fri 20 Mar 2020 10:27:32 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/target_renesas_rx-20200320:
Add rx-softmmu
target/rx: Dump bytes for each insn during disassembly
target/rx: Collect all bytes during disassembly
target/rx: Emit all disassembly in one prt()
target/rx: Use prt_ldmi for XCHG_mr disassembly
target/rx: Replace operand with prt_ldmi in disassembler
target/rx: Disassemble rx_index_addr into a string
target/rx: RX disassembler
target/rx: CPU definitions
target/rx: TCG helpers
target/rx: TCG translation
MAINTAINERS: Add entry for the Renesas RX architecture
hw/registerfields.h: Add 8bit and 16bit register macros
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Squashed patches from Richard Henderson modifying
qapi/common.json and tests/machine-none-test.c]
Message-Id: <20200224141923.82118-21-ysato@users.sourceforge.jp>
[PMD: Added @since 5.0 tag in SysEmuTarget]
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl5xDUIACgkQ+9DbCVqe
KkQwCwf/YtmUsNxxO+CgNctq2u3jV4FoOdQP3bejvmT2+cigKJhQuBlWPg1/YsqF
RDNkmBQx2JaVVMuVmpnwVK1UD+kmYZqrtlOkPNcVrjPmLCq3BVI1LHe6Rjoerx8F
QoZyH0IMNHbBgDo1I46lSFOWcxmOvo+Ow7NX5bPKwlRzf0dyEqSJahRaZLAgUscR
taTtGfk9uQsnxoRsvH/efiQ4bZtUvrEQuhEX3WW/yVE1jTpcb2llwX4xONJb2It3
/0WREGEEIT8PpnWw2S3FH4THY/BjWgz/FPDwNNZYCKBMWDjuG/8KHryd738T9rzo
lkGP9YcXmiyxMMyFFwS8RD3SHr8LvQ==
=Wm+a
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1' into staging
Testing and gdbstub updates:
- docker updates for VirGL
- re-factor gdbstub for static GDBState
- re-factor gdbstub for dynamic arrays
- add SVE support to arm gdbstub
- add some guest debug tests to check-tcg
- add aarch64 userspace register tests
- remove packet size limit to gdbstub
- simplify gdbstub monitor code
- report vContSupported in gdbstub to use proper single-step
# gpg: Signature made Tue 17 Mar 2020 17:47:46 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-gdbstub-170320-1: (28 commits)
gdbstub: Fix single-step issue by confirming 'vContSupported+' feature to gdb
gdbstub: do not split gdb_monitor_write payload
gdbstub: change GDBState.last_packet to GByteArray
tests/tcg/aarch64: add test-sve-ioctl guest-debug test
tests/tcg/aarch64: add SVE iotcl test
tests/tcg/aarch64: add a gdbstub testcase for SVE registers
tests/guest-debug: add a simple test runner
configure: allow user to specify what gdb to use
tests/tcg/aarch64: userspace system register test
target/arm: don't bother with id_aa64pfr0_read for USER_ONLY
target/arm: generate xml description of our SVE registers
target/arm: default SVE length to 64 bytes for linux-user
target/arm: explicitly encode regnum in our XML
target/arm: prepare for multiple dynamic XMLs
gdbstub: extend GByteArray to read register helpers
target/i386: use gdb_get_reg helpers
target/m68k: use gdb_get_reg helpers
target/arm: use gdb_get_reg helpers
gdbstub: add helper for 128 bit registers
gdbstub: move mem_buf to GDBState and use GByteArray
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
glib's G_DEFINE_AUTOPTR_CLEANUP_FUNC() macro defines several static
inline functions, often with some of them unused, but prior to 2.57.2
did not mark the functions as such. As a result, clang (but not gcc)
fails to build with older glib unless -Wno-unused-function is enabled.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200317175534.196295-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is useful, especially when testing relatively new gdbstub
features that might not be in distro packages yet.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-22-alex.bennee@linaro.org>
The comment in tcg-runtime-gvec.c about CONFIG_VECTOR16 says that
tcg-op-gvec.c has eliminated size 8 vectors, and only passes on
multiples of 16. This may have been true of the first few operations,
but is not true of all operations.
In particular, multiply, shift by scalar, and compare of 8- and 16-bit
elements are not expanded inline if host vector operations are not
supported.
For an x86_64 host that does not support AVX, this means that we will
fall back to the helper, which will attempt to use SSE instructions,
which will SEGV on an invalid 8-byte aligned memory operation.
This patch simply removes the CONFIG_VECTOR16 code and configuration
without further simplification.
Buglink: https://bugs.launchpad.net/bugs/1863508
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
glibc and Linux-provided headers are known to generate macro
redefinition warnings when used together. For example:
<linux/mman.h> and <sys/mman.h> duplicate some macro definitions.
We normally never see those warnings because GCC suppresses
warnings generated by system headers. We carry our own copy of
Linux header files, though, and this makes those warnings not be
suppressed when glibc headers are included before Linux headers
(e.g. if <sys/mman.h> is included before <linux/mman.h>).
Use -isystem instead of -I for linux-headers. This makes the
compiler treat our linux-headers directory the same way it treats
system-provided Linux headers, and suppress warnings generated by
them.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Simple Authentication and Security Layer (SASL) library
re-defines the struct iovec on Win32 [*]. QEMU also re-defines
it in "qemu/osdep.h". The two definitions then clash on a MinGW
build.
We can avoid the SASL definition by defining STRUCT_IOVEC_DEFINED.
Since QEMU already defines 'struct iovec' if it is missing, add
the definition to vnc_sasl_cflags to avoid SASL re-defining it.
[*] https://github.com/cyrusimap/cyrus-sasl/blob/cyrus-sasl-2.1.27/include/sasl.h#L187
Cc: Alexey Pavlov <alexpux@gmail.com>
Cc: Biswapriyo Nath <nathbappai@gmail.com>
Reported-by: Youry Metlitsky <winaes@yandex.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200309122454.22551-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On upgrades the old .so files usually are replaced. But on the other
hand since a qemu process represents a guest instance it is usually kept
around.
That makes late addition of dynamic features e.g. 'hot-attach of a ceph
disk' fail by trying to load a new version of e.f. block-rbd.so into an
old still running qemu binary.
This adds a fallback to also load modules from a versioned directory in the
temporary /var/run path. That way qemu is providing a way for packaging
to store modules of an upgraded qemu package as needed until the next reboot.
An example how that can then be used in packaging can be seen in:
https://git.launchpad.net/~paelzer/ubuntu/+source/qemu/log/?h=bug-1847361-miss-old-so-on-upgrade-UBUNTU
Fixes: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1847361
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200310145806.18335-2-christian.ehrhardt@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were one error on the test (missing an s for --exists).
But we really need a recent zstd (1.4.0).
Thanks to Michal Privoznik to provide the right vension.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200310111431.173151-1-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The recent Linux io_uring API has several advantages over ppoll(2) and
epoll(2). Details are given in the source code.
Add an io_uring implementation and make it the default on Linux.
Performance is the same as with epoll(7) but later patches add
optimizations that take advantage of io_uring.
It is necessary to change how aio_set_fd_handler() deals with deleting
AioHandlers since removing monitored file descriptors is asynchronous in
io_uring. fdmon_io_uring_remove() marks the AioHandler deleted and
aio_set_fd_handler() will let it handle deletion in that case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-6-stefanha@redhat.com
Message-Id: <20200305170806.1313245-6-stefanha@redhat.com>
This adds a new binary qemu-storage-daemon that doesn't yet do more than
some typical initialisation for tools and parsing the basic command
options --version, --help and --trace.
Even though this doesn't add any options yet that create things (like
--object or --blockdev), already document that we're planning to process
them in the order they are given on the command line rather than trying
(and failing, like vl.c) to resolve dependencies between options
automatically.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-2-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is used for some of the vm-build tests so lets detect it and
behave sanely when it is not installed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200303150622.20133-8-alex.bennee@linaro.org>
Add it to several build systems to make testing good.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-19-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
User-mode does not need the system tools. Do not build them by
default if the user specifies --disable-system.
This disables building the following binaries on a user-only build:
- elf2dmp
- qemu-edid
- qemu-ga
- qemu-img
- qemu-io
- qemu-nbd
- ivshmem-client
- ivshmem-server
The qemu-user binaries are not affected by this change.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200217133327.25144-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
if softmmu is not enabled, we disable by default fdt and
slirp as they are only used by -softmmu targets.
A side effect is the git submodules are not cloned
if they are not needed.
Clone and build can be forced with --enable-fdt and
--enable-slirp.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190621130544.18860-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----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=UwrK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-02-15' into staging
QAPI patches for 2020-02-15
# gpg: Signature made Sat 15 Feb 2020 10:44:28 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-02-15:
qapi: Delete all the "foo: dropped in n.n" notes
qapi/migration.json: Replace _this_ with *this*
qapi: Add blank lines before bulleted lists
qapi: Use explicit bulleted lists
qapi/ui.json: Avoid `...' Texinfo style quoting
qapi/ui.json: Put input-send-event body text in the right place
qapi: Remove hardcoded tabs
qapi: Fix indent level on doc comments in json files
qapi: Fix incorrect "Not documented" claims in QMP documentation
qapi/block-core.json: Use literal block for ascii art
qga/qapi-schema.json: minor format fixups for rST
qga/qapi-schema.json: Fix indent level on doc comments
qga/qapi-schema.json: Fix missing '-' in GuestDiskBusType doc comment
Makefile: Fix typo in dependency list for interop manpages
configure: Check that sphinx-build is using Python 3
configure: Pick sphinx-build-3 when available
configure: Allow user to specify sphinx-build binary
qapi: Expand documentation for LostTickPolicy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently configure's has_sphinx_build() check simply runs a dummy
sphinx-build and either passes or fails. This means that "no
sphinx-build at all" and "sphinx-build exists but is too old" are
both reported the same way.
Further, we want to assume that all the Python we write is running
with at least Python 3.5; configure checks that for our scripts, but
Sphinx extensions run with whatever Python version sphinx-build
itself is using.
Add a check to our conf.py which makes sphinx-build fail if it would
be running our extensions with an old Python, and handle this
in configure so we can report failure helpfully to the user.
This will mean that configure --enable-docs will fail like this
if the sphinx-build provided is not suitable:
Warning: sphinx-build exists but it is either too old or uses too old a Python version
ERROR: User requested feature docs
configure was not able to find it.
Install texinfo, Perl/perl-podlators and a Python 3 version of python-sphinx
(As usual, the default is to simply not build the docs, as we would
if sphinx-build wasn't present at all.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200213175647.17628-3-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will require a sphinx-build that uses Python 3. On
some systems, sphinx-build is fine, on others you need to use
sphinx-build-3. To keep things working out of the box on both kinds
of systems, try sphinx-build-3, then sphinx-build.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <87a75lqe8e.fsf@dusky.pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl5ByuQTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYid5gD/44YscK7P2tcFl+yDPJkUNV1Hja7iRM
K14kuSHw2UoZ4DwQ69pmBJekrMDKHiI3HltXk51xLA6tQ9geubt6BAlwUeJfuIJQ
DC9f9cN4x5OsJQZaFXcelR1vfpGntqQuKU6SXNHYTUTCL3fOEgpxaFm89pDevvxI
Rvalg3OLrx4uAfjlllkpzKtcRjdytq08QJ8H6F0VbFY+uAwYosfxhst4M29XCLdA
ESHqL8IgXNWcownIsx6cYwNkjOC7hE1vYwBjxbyLY85Y8frijnbB6JwVXH1YQWPz
lTfCDCmBwBt7z5W16djZiib6A3Nlb7UMmOXuMFVWa9j6fECwCtC3Huvg80ofVtHB
FBO03mT1FrElTZ5unJInTx8gQX2dHaDF8v6rEzYTeroaAbdexX401boWPKUYoqhR
kDcdcAx4EsNfBOVQc40jAEyLHEs3yZ81os8G1H/ZafW2yj2Sob9NNvV57v8moVdp
nZ+B4NNXrK+/lASnuW0eoIAcExTjhA9WDztacJR5mafTw4RmeIkbRrNPsekn8cHb
FjaMFgA4+r44cUYMjuLO2zx20y3fCCmYUFP9heBbsvRhkTy0VMvMbt9B2zIY1v8n
IQgVvqcrN9Epxvq+8vgC842p3TJii0KaAiF/YLZ1nHAfxRI1ax8gXDP3ak2abs0a
xjC5FaAaeE0VRw==
=D4dQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf2' into staging
RISC-V Patches for the 5.0 Soft Freeze, Part 2
This is a fairly light-weight pull request, but I wanted to send it out to
avoid the Goldfish stuff getting buried as the next PR should contain the H
extension implementation.
As far as this PR goes, it contains:
* The addition of syscon device tree nodes for reboot and poweroff, which
allows Linux to control QEMU without an additional driver. The existing
device was already compatible with the syscon interface.
* A fix to our GDB stub to avoid confusing XLEN and FLEN, specifically useful
for rv32id-based systems.
* A device emulation for the Goldfish RTC device, a simple memory-mapped RTC.
* The addition of the Goldfish RTC device to the RISC-V virt board.
This passes "make check" and boots buildroot for me.
# gpg: Signature made Mon 10 Feb 2020 21:28:04 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* remotes/palmer/tags/riscv-for-master-5.0-sf2:
MAINTAINERS: Add maintainer entry for Goldfish RTC
riscv: virt: Use Goldfish RTC device
hw: rtc: Add Goldfish RTC device
riscv: Separate FPU register size from core register size in gdbstub [v2]
riscv/virt: Add syscon reboot and poweroff DT nodes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we insist on using 'sphinx-build' from the $PATH;
allow the user to specify the binary to use. This will be
more useful as we become pickier about the capabilities
we require (eg needing a Python 3 sphinx-build).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20200213175647.17628-2-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
TARGET_GPROF is the same for all targets, write it to
config-host.mak instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: <20200204161104.21077-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The size of the FPU registers is dictated by the 'f' and 'd' features,
not the core processor register size. Processors with the 'd' feature
have 64-bit FPU registers. Processors without the 'd' feature but with
the 'f' feature have 32-bit FPU registers.
Signed-off-by: Keith Packard <keithp@keithp.com>
[Palmer: This requires manually triggering a rebuild of
riscv32-softmmu/gdbstub-xml.c]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The variable is called 'have_afalg' and not 'hava_afalg'.
Fixes: f0d92b56d8 ('introduce some common functions for af_alg backend')
Message-Id: <20200203160046.23194-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
+a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
=TD0Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some of the CFLAGS that are discovered during configure, for example
compiler warnings, are being included on the linker command line because
QEMU_CFLAGS is added to it. Other flags, such as the -m32, appear twice
because they are included in both QEMU_CFLAGS and LDFLAGS. All this
leads to confusion with respect to what goes in which Makefile variables
(and we have plenty).
So, introduce QEMU_LDFLAGS for flags discovered by configure, following
the lead of QEMU_CFLAGS, and stop adding to it:
1) options that are already in CFLAGS, for example "-g"
2) duplicate options
At the same time, options that _are_ needed by both compiler and linker
must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer.
This is mostly -fsanitize options. For now, --extra-cflags has this behavior
(but --extra-cxxflags does not).
Meson will not include CFLAGS on the linker command line, do the same in our
build system as well.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We only require libfdt for system emulation, in a small set
of architecture:
4077 # fdt support is mandatory for at least some target architectures,
4078 # so insist on it if we're building those system emulators.
4079 fdt_required=no
4080 for target in $target_list; do
4081 case $target in
4082 aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu|mips64el-softmmu|riscv*-softmmu)
4083 fdt_required=yes
Do not build libfdt if we did not manually specified --enable-fdt,
or have one of the platforms that require it in our target list.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200118140619.26333-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define HAVE_STRUCT_STAT_ST_ATIM to 1 if `st_atim' is member of `struct
stat' which means support nanosecond resolution for the file timestamp
fields.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
kcov is kernel code coverage tracing tool. It requires kernel 4.4+
compiled with certain kernel options.
This patch checks if kcov header "sys/kcov.h" is present on build
machine, and stores the result in variable CONFIG_KCOV, meant to
be used in linux-user code related to the support for three ioctls
that were introduced at the same time as the mentioned header
(their definition was a part of the first version of that header).
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1579214991-19602-11-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
All tcg includes are relative to the repository root directory,
we can safely remove the tcg/ directory from the include search
path list.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-5-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The qos stuff belongs to qtest, so move it into that directory, too.
Message-Id: <20191218103059.11729-8-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.
Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
gdbus-codegen generated code requires gio-unix on Unix, so add it to
GIO libs/cflags.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Python 3.5 is the oldest Python version available on our
supported build platforms, and Python 2 end of life will be 3
weeks after the planned release date of QEMU 4.2.0. Drop Python
2 support from configure completely, and require Python 3.5 or
newer.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20191016224237.26180-1-ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most developers are using out-of-tree builds and it was discussed in the past
to only allow those. To prepare for the transition, use out-of-tree builds
in all continuous integration jobs.
Based on a patch by Marc-André Lureau.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Li-Wen Hsu <lwhsu@freebsd.org>
Message-Id: <1576074829-56711-1-git-send-email-pbonzini@redhat.com>
Our docker infrastructure isn't quite as multiarch as we would wish so
lets allow the user to disable it if they want. This will allow us to
use still run check-tcg on non-x86 CI setups.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Since we are actually testing for the newer capng library, rename the
symbol to match.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are already including -D__STDC_LIMIT_MACROS in the global CXXFLAGS,
so it makes sense to do the same for -D__STDC_CONSTANT_MACROS and
-D__STDC_FORMAT_MACROS instead of limiting that to libvixl.
The -Wno-sign-compare option can also be removed since GCC 4.6 is not
supported anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When including the internal SLIRP library, we should add all the libraries that
it needs for the build. Right now they are all included by QEMU, but -liphlpapi
is not needed without slirp. Move it from LIBS to slirp_libs.
Based on a patch by Marc-André Lureau.
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's been deprecated since QEMU v3.1. We've explicitly asked in the
deprecation message that people should speak up on qemu-devel in case
they are still actively using the bluetooth part of QEMU, but nobody
ever replied that they are really still using it.
I've tried it on my own to use this bluetooth subsystem for one of my
guests, but I was also not able to get it running anymore: When I was
trying to pass-through a real bluetooth device, either the guest did
not see the device at all, or the guest crashed.
Even worse for the emulated device: When running
qemu-system-x86_64 -bt device:keyboard
QEMU crashes once you hit a key.
So it seems like the bluetooth stack is not only neglected, it is
completely bitrotten, as far as I can tell. The only attention that
this code got during the past years were some CVEs that have been
spotted there. So this code is a burden for the developers, without
any real benefit anymore. Time to remove it.
Note: hw/bt/Kconfig only gets cleared but not removed here yet.
Otherwise there is a problem with the *-softmmu/config-devices.mak.d
dependency files - they still contain a reference to this file which
gets evaluated first on some build hosts, before the file gets
properly recreated. To avoid breaking these builders, we still need
the file around for some time. It will get removed in a couple of
weeks instead.
Message-Id: <20191120091014.16883-4-thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
virtfs-proxy-helper is the only user of libcap; everyone else is using
the simpler libcap-ng API. Switch and remove the configure code to
detect libcap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[groug: - drop remaining -lcap from Makefile
- fix error message in configure]
Signed-off-by: Greg Kurz <groug@kaod.org>
The bzip2 tool is not included in default installations.
On freshly installed systems, ./configure succeeds but 'make'
might fail later:
BUNZIP2 pc-bios/edk2-i386-secure-code.fd.bz2
/bin/sh: bzip2: command not found
make: *** [Makefile:305: pc-bios/edk2-i386-secure-code.fd] Error 127
make: *** Deleting file 'pc-bios/edk2-i386-secure-code.fd'
make: *** Waiting for unfinished jobs....
Add a check in ./configure to warn the user if bzip2 is missing.
See also: 536d2173b2 ("roms: build edk2 firmware binaries ...")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191108114531.21518-3-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The EDK2 firmware blobs only target the X86/ARM architectures.
Define the DECOMPRESS_EDK2_BLOBS variable and only decompress
the blobs when the variable exists.
See also: 536d2173b2 ("roms: build edk2 firmware binaries ...")
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191108114531.21518-2-philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The function reg_mr_iova is an enhanced version of ibv_reg_mr function
that can help to easly register and use guest's MRs.
Add check in 'configure' phase to detect if we have libibverbs with this
support.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190818132107.18181-2-yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently QEMU uses its own XTS cipher mode, however, this has
relatively poor performance.
Gcrypt now includes its own XTS cipher which is at least x2 faster than
what we get with QEMU's on Fedora/RHEL hosts. With gcrypt git master, a
further x5-6 speed up is seen.
This is essential for QEMU's LUKS performance to be viable.
-----BEGIN PGP SIGNATURE-----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=fkwe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/crypto-luks-pull-request' into staging
crypto: improve performance of ciphers in XTS mode
Currently QEMU uses its own XTS cipher mode, however, this has
relatively poor performance.
Gcrypt now includes its own XTS cipher which is at least x2 faster than
what we get with QEMU's on Fedora/RHEL hosts. With gcrypt git master, a
further x5-6 speed up is seen.
This is essential for QEMU's LUKS performance to be viable.
# gpg: Signature made Mon 28 Oct 2019 15:48:38 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/crypto-luks-pull-request:
crypto: add support for nettle's native XTS impl
crypto: add support for gcrypt's native XTS impl
tests: benchmark crypto with fixed data size, not time period
tests: allow filtering crypto cipher benchmark tests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nettle 3.5.0 will add support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
Unfortunately this degrades nettle performance from 612 MB/s to 568 MB/s
as nettle's XTS impl isn't so well optimized yet.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Libgcrypt 1.8.0 added support for the XTS mode. Use this because long
term we wish to delete QEMU's XTS impl to avoid carrying private crypto
algorithm impls.
As an added benefit, using this improves performance from 531 MB/sec to
670 MB/sec, since we are avoiding several layers of function call
indirection.
This is even more noticable with the gcrypt builds in Fedora or RHEL-8
which have a non-upstream patch for FIPS mode which does mutex locking.
This is catastrophic for encryption performance with small block sizes,
meaning this patch improves encryption from 240 MB/sec to 670 MB/sec.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pass arguments with -plugin=libfoo.so,arg=bar,arg=baz
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved into plugins]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This adds the basic boilerplate feature enable option for the build.
We shall expand it later.
[AJB: split from larger patch]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: moved directory and merged various fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This patch enables a debugger to read the current privilege level via a virtual
"priv" register. When compiled with CONFIG_USER_ONLY the register is still
visible but always reports the value zero.
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Such support is present almost everywhere, except for Xcode 9.
It is added in Xcode 10, but travis uses xcode9 by default,
so we should support it for a while yet.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
/6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
=+xdg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: add vhost-user-fs-pci device
virtio: add vhost-user-fs base device
virtio: Add virtio_fs linux headers
tests/acpi: add expected tables for arm/virt
tests: document how to update acpi tables
tests: Add bios tests to arm/virt
tests: allow empty expected files
tests/acpi: add empty files
tests: Update ACPI tables list for upcoming arm/virt tests
docs/specs: Add ACPI GED documentation
hw/arm: Use GED for system_powerdown event
hw/arm: Factor out powerdown notifier from GPIO
hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
hw/arm/virt: Add memory hotplug framework
hw/acpi: Add ACPI Generic Event Device Support
hw/acpi: Do not create memory hotplug method when handler is not defined
hw/acpi: Make ACPI IO address space configurable
vhost-user: save features if the char dev is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virtio-fs virtio device provides shared file system access using
the FUSE protocol carried over virtio.
The actual file server is implemented in an external vhost-user-fs device
backend process.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190930105135.27244-3-dgilbert@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SLOF implements one itself so let's remove it from QEMU. It is one less
image and simpler setup as the RTAS blob never stays in its initial place
anyway as the guest OS always decides where to put it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On IBM Z, KVM in the kernel is only implemented for 64-bit mode, and
with regards to TCG, we also only support 64-bit host CPUs (see the
check at the beginning of tcg/s390/tcg-target.inc.c), so we should
remove s390 (without "x", i.e. the old 31-bit mode CPUs) from the
list of supported CPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190928190334.6897-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The slirp sub-module complains about not being able to find the glib
library on cross-compiles because it is using the default pkg-config
tool (which isn't installed in our cross-build docker images).
Preserve PKG_CONFIG in our host config and pass it down to slirp.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This dependency is currently "automagic", which is bad for distributions.
Signed-off-by: James Le Cuirot <chewi@gentoo.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190914145155.19360-1-chewi@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For whatever reason this doesn't trigger normally but because
compile_prog uses QEMU_CFLAGS we end up trying to build a -pie
--no-pie build which confuses compilers on some non-x86 hosts.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script. The same configuration files can
also be included in Makefile and Makefile.qemu
[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
The introduction of podman support inadvertently broke configure's
detect of the container support as the configure probe didn't specify
an engine type. To fix this in docker.py:
- only (re)set USE_ENGINE if --engine is specified
- enhance the output so docker is no longer just yes
In the configure script we can at least start cleaning up the
detecting and naming of variables. To avoid too much churn the
conversion of the various make DOCKER_foo variables has been left for
future clean-ups.
Fixes: 9459f75413
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: David Hildenbrand <david@redhat.com>
The current approach to capture the Python version is fragile, as it
was demonstrated by a very specific build of Python 3 on Fedora 29
that, under non-interactive shells would print multiline version
information.
The (badly) stripped version output would be sent to config-host.mak,
producing bad syntax and rendering the makefiles unusable. Now, the
Python versions is printed by configure, but only a simple (and better
controlled variable) indicating whether the build system is using
Python 2 is kept on config-host.mak.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190826155832.17427-1-crosa@redhat.com>
Reviewed-by: Tony Nguyen <tony.nguyen@bt.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Bump minium glib2 version to 2.48
* Convert much of the crypto code to use automatic memory free functions
-----BEGIN PGP SIGNATURE-----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=adkl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/autofree-pull-request' into staging
require newer glib2 to enable autofree'ing of stack variables exiting scope
* Bump minium glib2 version to 2.48
* Convert much of the crypto code to use automatic memory free functions
# gpg: Signature made Thu 22 Aug 2019 11:51:59 BST
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/autofree-pull-request:
crypto: use auto cleanup for many stack variables
crypto: define cleanup functions for use with g_autoptr
glib: bump min required glib library version to 2.48
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per supported platforms doc[1], the various min glib on relevant distros is:
RHEL-8: 2.56.1
RHEL-7: 2.50.3
Debian (Buster): 2.58.3
Debian (Stretch): 2.50.3
OpenBSD (Ports): 2.58.3
FreeBSD (Ports): 2.56.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.48 is a reasonable target.
Compared to the previous version bump in
commit e7b3af8159
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Fri May 4 15:34:46 2018 +0100
glib: bump min required glib library version to 2.40
This will result in us dropping support for Debian Jessie and
Ubuntu 14.04.
As per the commit message 14.04 was already outside our list
of supported build platforms and an exception was only made
because one of the build hosts used during merge testing was
stuck on 14.04.
Debian Jessie is justified to drop because we only aim to
support at most 2 major versions of Debian at any time. This
means Buster and Stretch at this time.
The g_strv_contains compat code is dropped as this API is
present since 2.44
The g_assert_cmpmem compat code is dropped as this API is
present since 2.46
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a left-over from commit
c12b6d70e3 ("pixman: drop submodule")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Defining CONFIG_TOOLS on the basis of $(TOOLS) has the disadvantage
of including it also if e.g. qemu-ga is requested. The correct
information is available in configure, define it there.
This also has the benefit of not installing the manpages for block layer
tools if the only "tool" being built is the guest agent.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-ga is included in the TOOLS variable without the .exe suffix, and this is
then worked around twice in the Makefile. Do the right thing in configure
instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If SDL2 is requested but pkg-config doesn't have a module for it
configure should fallback to use sdl*-config, but wasn't able to
because and old variable (from SDL) was being used by mistake.
Correct the variable name and complete other related changes so
there are no more references to the old SDL.
Fixes: 0015ca5cba ("ui: remove support for SDL1.2 in favour of SDL2")
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190710225528.409-1-carenas@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
9b9c37c364 ("tcg-sparc: Assume v9 cpu always, i.e. force v8plus in
32-bit mode.", 2012-09-21) removed the need for this variable and
most of the references to it, but this one.
Remove defunct code, no effect or functionality change expected.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190709234330.89699-1-carenas@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch moves the define of target access alignment earlier from
target/foo/cpu.h to configure.
Suggested in Richard Henderson's reply to "[PATCH 1/4] tcg: TCGMemOp is now
accelerator independent MemOp"
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <11e818d38ebc40e986cfa62dd7d0afdc@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: tony.nguyen@bt.com <tony.nguyen@bt.com>
If configure detects that it's being run on a source tree which
is missing git modules, it prints an error messages suggesting
that the user downloads a correct source archive from the project
website. However https://www.qemu.org/download/ is a link to a
page with multiple tabs, with the default being the one telling
users how to get binaries from their distro. Clarify the URL
we print to include the #source anchor, so that the browser will
go directly to the source-tarball instructions.
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190718131659.20783-1-peter.maydell@linaro.org
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our module system does not support Windows, because it relies on
resolving symbols from the main executable.
If there is enough interest in supporting modules on Windows, we could
generate an import library for the executable and link with it:
https://stackoverflow.com/questions/15454968/dll-plugin-that-uses-functions-defined-in-the-main-executable
However, there is a small chicken egg problem, since the executable
link and exports extra symbols needed by the library...
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190718120413.27678-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only the emulators link to code that uses capstone, so adding it to the
global LIBs places undesirable dependancies on other binaries, in
particular the tools.
There is no variable that covers both user emulation and machine
emulation, so add a new "$libs_cpu" for this purpose.
In particular this removes the 8 MB capstone dep from the things
qemu-img links against, allowing for a more minimal installation
in scenarios that don't want system emulators installed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
CONFIG_TPM is defined to a rather weird $(CONFIG_SOFTMMU) so that it
expands to the right thing in hw/Makefile.objs. This however is not
needed anymore and it has a corresponding hack in create_config
to turn it into "#define CONFIG_TPM 1". Clean up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We make a few sub-directories recursively, in particular
$(TARGET_DIRS).
For goal "all", we do it the nice way: "all" has a prerequisite
subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make
recursively. Behaves nicely with -j and -k.
For other goals such as "clean" and "install", the recipe runs make
recursively in a for loop. Ignores -j and -k.
The next commit will fix that for "clean" and "install". This commit
prepares the ground by renaming the targets we use for "all" to
include the goal for the sub-make. This will permit reusing them for
goals other than "all".
Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T. Rename
to T/all, and declare phony.
Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R. Default
goal is "all" for all R. Rename to pc-bios/R/all, and declare phony.
The remainder are renamed just for consistency.
Target subdir-dtc runs "make libbft/libfdt.a" in dtc. Rename to
dtc/all, and declare phony.
Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE)
in $(SRC_PATH)/capstone. Rename to capstone/all, and declare phony.
Target subdir-slirp runs "make" in $(SRC_PATH)/slirp. Default goal is
all, which builds $(BUILD_DIR)/libslirp.a. Rename to slirp/all, and
declare phony.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-4-armbru@redhat.com>
[Add compatibility gunk to keep make working across the rename]
Python 2 will reach end of life in January 1 2020. Declare it as
deprecated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190503193721.18459-1-ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ehabkost: print "warning:" in lowercase]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The sem_timedwait function has been annotated as requiring
non-null args in latest header files from GCC snapshot
representing the future 2.30 release.
This causes configure to fail when -Werror is used:
config-temp/qemu-conf.c: In function ‘main’:
config-temp/qemu-conf.c:2:25: error: null argument where non-null required (argument 1) [-Werror=nonnull]
2 | int main(void) { return sem_timedwait(0, 0); }
| ^~~~~~~~~~~~~
config-temp/qemu-conf.c:2:25: error: null argument where non-null required (argument 2) [-Werror=nonnull]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190617114114.24897-1-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The configure script breaks when the qemu source directory is in a path
containing white spaces, in particular the list of targets is not
correctly generated when calling "./configure --help" because of how the
default_target_list variable is built.
In addition to that, *building* qemu from a directory with spaces breaks
some assumptions in the Makefiles, even if the original source path does
not contain spaces like in the case of an out-of-tree build, or when
symlinks are involved.
To avoid these issues, refuse to run the configure script and the
Makefile if there are spaces or colons in the source path or the build
path, taking as inspiration what the kbuild system in linux does.
Buglink: https://bugs.launchpad.net/qemu/+bug/1817345
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Antonio Ospite <antonio.ospite@collabora.com>
Message-Id: <20190526144747.30019-3-ao2@ao2.it>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since commit 79d77bcd36 (configure: Remove --source-path option,
2019-04-29) source_path cannot be overridden anymore, move it out of the
"default parameters" block since the word "default" may suggest that the
value can change, while in fact it does not.
While at it, only set source_path once and separate the positional
argument of basename with "--" to more robustly cover the case of path
names starting with a dash.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Antonio Ospite <antonio.ospite@collabora.com>
Message-Id: <20190526144747.30019-2-ao2@ao2.it>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2. The libssh library has various advantages over libssh2:
- easier API for authentication (for example for using ssh-agent)
- easier API for known_hosts handling
- supports newer types of keys in known_hosts
Use APIs/features available in libssh 0.8 conditionally, to support
older versions (which are not recommended though).
Adjust the iotest 207 according to the different error message, and to
find the default key type for localhost (to properly compare the
fingerprint with).
Contributed-by: Max Reitz <mreitz@redhat.com>
Adjust the various Docker/Travis scripts to use libssh when available
instead of libssh2. The mingw/mxe testing is dropped for now, as there
are no packages for it.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190620200840.17655-1-ptoscano@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is a left-over from commit 7aaa6a1637 "tpm: express dependencies
with Kconfig".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190524181411.8599-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
-----BEGIN PGP SIGNATURE-----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=2q3B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190529' into staging
ppc patch queue 2019-05-29
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
# gpg: Signature made Wed 29 May 2019 07:49:04 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190529: (44 commits)
ppc/pnv: add dummy XSCOM registers for PRD initialization
ppc/pnv: introduce new skiboot platform properties
spapr: Don't migrate the hpt_maxpagesize cap to older machine types
spapr: change default interrupt mode to 'dual'
spapr/xive: fix multiple resets when using the 'dual' interrupt mode
docs: provide documentation on the POWER9 XIVE interrupt controller
spapr/irq: add KVM support to the 'dual' machine
ppc/xics: fix irq priority in ics_set_irq_type()
spapr/irq: initialize the IRQ device only once
spapr/irq: introduce a spapr_irq_init_device() helper
spapr: check for the activation of the KVM IRQ device
spapr: introduce routines to delete the KVM IRQ device
sysbus: add a sysbus_mmio_unmap() helper
spapr/xive: activate KVM support
spapr/xive: add migration support for KVM
spapr/xive: introduce a VM state change handler
spapr/xive: add state synchronization with KVM
spapr/xive: add hcall support when under KVM
spapr/xive: add KVM support
spapr: Print out extra hints when CAS negotiation of interrupt mode fails
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a vhost-user gpu backend, based on virtio-gpu/3d device. It is
associated with a vhost-user-gpu device.
Various TODO and nice to have items:
- multi-head support
- crash & resume handling
- accelerated rendering/display that avoids the waiting round trips
- edid support
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
About half of the values to which CPU_CFLAGS is set
have multiple space separated arguments.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190501223819.8584-3-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We cannot use the ppc64le host compiler to build ppc64(be) guest code.
Clean up confusion between cross_cc_powerpc and cross_cc_ppc; make use
of the cflags variable as well.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190501223819.8584-2-richard.henderson@linaro.org>
[dwg: Dropped hunk relating to ppc64abi32, it doesn't test properly]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzllrsdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9/qAgAuYpF/gHrkfT+IFrw
OsgV1pPdhh+opxp44ayIQ6VC64voij0k/NnmC3/BxRv89yPqchvA6m0c2jzfGuwZ
ICpDt7LvFTrG9k8X9vEXbOTfh5dS/5g1o0LXiGU9RmMaC/5z2ZIabxU8K1Ti3+X0
P3B5s65rRQ8fPzOAMLEjeaHYQ/AOX/CNsmgFDve+d0b9tJY99UVO3Pb0h3+eR0s3
/4AHWG+IACGX7MVgFIfkEbGVnwboNiT20MUq3Exn2yGgg0IbLfoUazOnbfRz9jkX
kbN6nAZ+WDynf31SvvkEL/P6W5medf58ufJOiBB8opIp1E4WDdM30V8RkkPOyj4z
YOBmSw==
=2RnL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-rng-20190522' into staging
Introduce qemu_guest_getrandom.
Use qemu_guest_getrandom in aspeed, nrf51, bcm2835, exynos4210 rng devices.
Use qemu_guest_getrandom in target/ppc darn instruction.
Support ARMv8.5-RNG extension.
Support x86 RDRAND extension.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
# gpg: Signature made Wed 22 May 2019 19:36:43 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-rng-20190522: (25 commits)
target/i386: Implement CPUID_EXT_RDRAND
target/ppc: Use qemu_guest_getrandom for DARN
target/ppc: Use gen_io_start/end around DARN
target/arm: Implement ARMv8.5-RNG
target/arm: Put all PAC keys into a structure
hw/misc/exynos4210_rng: Use qemu_guest_getrandom
hw/misc/bcm2835_rng: Use qemu_guest_getrandom_nofail
hw/misc/nrf51_rng: Use qemu_guest_getrandom_nofail
aspeed/scu: Use qemu_guest_getrandom_nofail
linux-user: Remove srand call
linux-user/aarch64: Use qemu_guest_getrandom for PAUTH keys
linux-user: Use qemu_guest_getrandom_nofail for AT_RANDOM
linux-user: Call qcrypto_init if not using -seed
linux-user: Initialize pseudo-random seeds for all guest cpus
cpus: Initialize pseudo-random seeds for all guest cpus
util: Add qemu_guest_getrandom and associated routines
ui/vnc: Use gcrypto_random_bytes for start_auth_vnc
ui/vnc: Split out authentication_failed
crypto: Change the qcrypto_random_bytes buffer type to void*
crypto: Use getrandom for qcrypto_random_bytes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prefer it to direct use of /dev/urandom.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For user-only, we require only the random number bits of the
crypto subsystem. Rename crypto-aes-obj-y to crypto-user-obj-y,
and add the random number objects, plus init.o to handle any
extra stuff the crypto library requires.
Move the crypto libraries from libs_softmmu and libs_tools to
LIBS, so that they are universally used.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
At least ubuntu 18.04 does not package static gnutls libraries.
At least Fedora 30 does not ship static nettle and gcrypt libraries.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190510012458.22706-2-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove it from the list of tools if --disable-system
and --disable-tools are used as we don't need it for
linux-user targets.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
[lv: I also disable it with disable-tools, not only with disable-system]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-4-lvivier@redhat.com>
The Makefile tries to include device Kconfig dependencies via
-include $(SUBDIR_DEVICES_MAK_DEP)
and thus expects files that match *-softmmu/config-devices.mak.d ...
however, the minikconf script currently generates files a la
"*-softmmu-config.devices.mak.d" instead, so the dependency files
simply got ignored so far. For example, after a "touch hw/arm/Kconfig",
the arm-softmmu/config-devices.mak file is currently not re-generated.
Fix it by putting the dependency files in the *-softmmu folders now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* configure: automatically pick python3 is available
(Daniel P. Berrangé)
* tests/acceptance (Cleber Rosa, Philippe Mathieu-Daudé):
* Multi-architecture test support
* Multiple arch-specific boot_linux_console test cases
* Increase verbosity of avocado by default
* docstring improvements
-----BEGIN PGP SIGNATURE-----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=GuGy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2019-05-02
* configure: automatically pick python3 is available
(Daniel P. Berrangé)
* tests/acceptance (Cleber Rosa, Philippe Mathieu-Daudé):
* Multi-architecture test support
* Multiple arch-specific boot_linux_console test cases
* Increase verbosity of avocado by default
* docstring improvements
# gpg: Signature made Fri 03 May 2019 01:40:06 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request:
configure: automatically pick python3 is available
tests/boot_linux_console: add a test for alpha + clipper
tests/boot_linux_console: add a test for s390x + s390-ccw-virtio
tests/boot_linux_console: add a test for arm + virt
tests/boot_linux_console: add a test for aarch64 + virt
tests/boot_linux_console: add a test for mips64el + malta
tests/boot_linux_console: add a test for mips + malta
scripts/qemu.py: support adding a console with the default serial device
tests/boot_linux_console: refactor the console watcher into utility method
tests/boot_linux_console: increase timeout
tests/boot_linux_console: add common kernel command line options
tests/boot_linux_console: update the x86_64 kernel
tests/boot_linux_console: rename the x86_64 after the arch and machine
tests/acceptance: look for target architecture in test tags first
tests/acceptance: use "arch:" tag to filter target specific tests
tests/acceptance: introduce arch parameter and attribute
tests/acceptance: fix doc reference to avocado_qemu directory
tests/acceptance: improve docstring on pick_default_qemu_bin()
tests/acceptance: show avocado test execution by default
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# configure
The last *.aml file was removed in commit 13b1881aac.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190409053320.14612-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The pam test generates a warning on Fedora 29 with -O3 compilation
because the headers declare that the pam_conversation pointer to
pam_start must be non-NULL. Change it to use the same 0 initialised
structure as we actually use in qauthz.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190404091725.20595-1-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Unless overridden via an env var or configure arg, QEMU will only look
for the 'python' binary in $PATH. This is unhelpful on distros which
are only shipping Python 3.x (eg Fedora) in their default install as,
if they comply with PEP 394, the bare 'python' binary won't exist.
This changes configure so that by default it will search for all three
common python binaries, preferring to find Python 3.x versions.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190327170701.23798-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The slirp project is now hosted on freedesktop at:
https://gitlab.freedesktop.org/slirp.
The libslirp source was extracted from qemu/slirp filtered through
clang-format (available in project tree). The qemu slirp directory can
be swapped by a git submodule.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190424110041.8175-3-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
All major distributions do support libseccomp version >= 2.3.0, so there
is no need to special-case on various architectures any longer.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20190404183923.GA22347@ls3530.dellerweb.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running "make" in a build directory from the pre-Kconfig merge time,
the build process currently fails with:
make: *** No rule to make target `.../default-configs/pci.mak',
needed by `aarch64-softmmu/config-devices.mak'. Stop.
To make sure that this problem at least goes away when the user runs
"configure" (or "sh config.status") again, we have to make sure that
we re-generate the .mak.d files. Thus remove the old stale files
while running the configure script.
Message-Id: <1552300145-12526-1-git-send-email-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Without the -Wno-typedef-redefinition option, clang complains if a typedef
gets redefined in gnu99 mode (since this is officially a C11 feature). This
used to also happen with older versions of GCC, but since we've bumped our
minimum GCC version to 4.8, all versions of GCC that we support do not seem
to issue this warning in gnu99 mode anymore. So this has become a common
problem for people who only test their code with GCC - they do not notice
the issue until they submit their patches and suddenly patchew or a
maintainer complains.
Now that we do not urgently need to keep the code clean from typedef
redefintions anymore with recent versions of GCC, we can ease the
situation with clang, too, and simply shut these warnings off for good.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190427154539.11336-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Normally configure identifies the source path by looking
at the location where the configure script itself exists.
We also provide a --source-path option which lets the user
manually override this.
There isn't really an obvious use case for the --source-path
option, and in commit 927128222b in 2017 we
accidentally added some logic that looks at $source_path
before the command line option that overrides it has been
processed.
The fact that nobody complained suggests that there isn't
any use of this option and we aren't testing it either;
remove it. This allows us to move the "make $source_path
absolute" logic up so that there is no window in the script
where $source_path is set but not yet absolute.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190318134019.23729-1-peter.maydell@linaro.org
Decompress and install the edk2 firmware blobs as part of "make install",
unless blob installation was disabled with configure's "--disable-blobs"
option.
Additionally, decompress the blobs as a pre-requisite for building softmmu
binaries -- this is helpful for both "make check" and other ad-hoc tests
one might want to run in the build directory.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This is an inverse selection which excludes a selected set of targets
from the default target list. It will mostly be useful for CI
configurations but it might be useful for some users as well.
You cannot specify --target-list and --target-list-exclude at the same
time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The Windows QEMU guest agent erroneously tries to collect PCI information
directly from the physical drive. However, windows stores SCSI/IDE information
with the drive and PCI information with the underlying storage controller
This changes get_pci_info to use the physical drive's underlying storage
controller to get PCI information.
* Additionally Fixes incorrect size being passed to DeviceIoControl
when getting volume extents. Can occasionally crash the guest agent
Signed-off-by: Matt Hines <mhines@scalecomputing.com>
*fix up some checkpatch warnings
*fix domain reporting and add some sanity checks for debug
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The slirp code is not yet split off into a separate repository, so
configuring QEMU to use slirp as a submodule is premature. This
causes the non-existant "slirp" to be requested from git when syncing
submodules. This in turn appears to be cause of non-deterministic
failures some developers are seeing with QEMU's submodule sync process.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190313173157.30504-1-berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This uses iconv to convert glyphs from the specified VGA font encoding to
unicode, and makes use of cchar_t instead of chtype when using ncursesw,
which allows to store all wide char as well as the WACS values. The default
charset is made CP437 since that is the charset of the hardware default VGA
font. This also makes the curses backend set the LC_CTYPE locale to "" to
allow curses to emit wide characters.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Eddie Kohler <ekohler@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190311135127.2229-3-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
curses will use it for proper wide output support.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20190311135127.2229-2-samuel.thibault@ens-lyon.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The glfs_*_async() functions do a callback once finished. This callback
has changed its arguments, pre- and post-stat structures have been
added. This makes it possible to improve caching, which is useful for
Samba and NFS-Ganesha, but not so much for QEMU. Gluster 6 is the first
release that includes these new arguments.
With an additional detection in ./configure, the new arguments can
conditionally get included in the glfs_io_cbk handler.
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
New versions of Glusters libgfapi.so have an updated glfs_ftruncate()
function that returns additional 'struct stat' structures to enable
advanced caching of attributes. This is useful for file servers, not so
much for QEMU. Nevertheless, the API has changed and needs to be
adopted.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since OpenBSD 6.0 [1], W^X is enforced by default [2].
TCG requires WX access. Disable W^X if it is available.
This fixes:
# lm32-softmmu/qemu-system-lm32
Could not allocate dynamic translator buffer
# sysctl kern.wxabort=1
kern.wxabort: 0 -> 1
# lm32-softmmu/qemu-system-lm32
mmap: Not supported
Abort trap (core dumped)
# gdb -q lm32-softmmu/qemu-system-lm32 qemu-system-lm32.core
(gdb) bt
#0 0x000017e3c156c50a in _thread_sys___syscall () at {standard input}:5
#1 0x000017e3c15e5d7a in *_libc_mmap (addr=Variable "addr" is not available.) at /usr/src/lib/libc/sys/mmap.c:47
#2 0x000017e17d9abc8b in alloc_code_gen_buffer () at /usr/src/qemu/accel/tcg/translate-all.c:1064
#3 0x000017e17d9abd04 in code_gen_alloc (tb_size=0) at /usr/src/qemu/accel/tcg/translate-all.c:1112
#4 0x000017e17d9abe81 in tcg_exec_init (tb_size=0) at /usr/src/qemu/accel/tcg/translate-all.c:1149
#5 0x000017e17d9897e9 in tcg_init (ms=0x17e45e456800) at /usr/src/qemu/accel/tcg/tcg-all.c:66
#6 0x000017e17d9891b8 in accel_init_machine (acc=0x17e3c3f50800, ms=0x17e45e456800) at /usr/src/qemu/accel/accel.c:63
#7 0x000017e17d989312 in configure_accelerator (ms=0x17e45e456800, progname=0x7f7fffff07b0 "lm32-softmmu/qemu-system-lm32") at /usr/src/qemu/accel/accel.c:111
#8 0x000017e17d9d8616 in main (argc=1, argv=0x7f7fffff06b8, envp=0x7f7fffff06c8) at vl.c:4325
[1] https://www.openbsd.org/faq/upgrade60.html
[2] https://undeadly.org/cgi?action=article&sid=20160527203200
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190307142822.8531-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The configure script checks multiple times whether it works in a git
repository and it does this by "test -e "${source_path}/.git" in 4 cases
but in one case where it tries to enable werror "-d" is used there which
fails on git worktrees as .git is a file then and not a directory.
This changes the test to "-e" as other occurrences.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190228043503.68494-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qdict-test-data.txt to the tests/data/qobject/ subdirectory,
and remove the unnecessary symlinking.
(See 4b2ff65a1f for similar test-data cleanup).
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[thuth: Fix conflict in MAINTAINERS]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This automatically removes the TPM backends from the
binary altogether if no front-ends are selected.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apart from defconfig (which is a no-op),
allyesconfig/allnoconfig/randcondfig can be implemented simply by ignoring
the RHS of assignments and "default" statements. The RHS is replaced
respectively by "true", "false" or a random value.
However, allyesconfig and randconfig do not quite work, because all the
files for hw/ARCH/Kconfig are sourced and therefore you could end up
enabling some ARM boards in x86 or things like that. This is left for
future work, but I am leaving it in to help debugging minikconf itself.
allnoconfig mode is tied to a new configure option, --without-default-devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.
The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig. One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script. This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph API that allows to add/remove nodes and edges from the graph,
implementation of Depth First Search to discover the paths and basic unit
test to check correctness of the API.
Included also a main executable that takes care of starting the framework,
create the nodes, set the available drivers/machines, discover the path and
run tests.
graph.h provides the public API to manage the graph nodes/edges
graph_extra.h provides a more private API used successively by the gtest integration part
qos-test.c provides the main executable
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
[Paolo's changes compared to the Google Summer of Code submission:
* added subprocess to test options
* refactored object creation to support live migration tests
* removed driver .before callback (unused)
* removed test .after callbacks (replaced by GTest destruction queue)]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
-----BEGIN PGP SIGNATURE-----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=dwff
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue, 2019-02-22
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
# gpg: Signature made Fri 22 Feb 2019 19:37:07 GMT
# gpg: using RSA key 657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
Acceptance tests: expect boot to extract 2GiB+ initrd with linux-v4.16
Acceptance tests: use linux-3.6 and set vm memory to 4GiB
tests.acceptance: adds simple migration test
tests.acceptance: adds multi vm capability for acceptance tests
scripts/qemu.py: log QEMU launch command line
Introduce a Python module structure
Acceptance tests: drop usage of "🥑 enable"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support to our configure and makefile machinery for building
our rST docs into HTML files.
Building the documentation now requires that sphinx-build is
available; this seems better than allowing half the docs to
be built if it is not present but having half of them missing.
(In particular it means that assuming that distros configured with
--enable-docs they'll get a helpful error from configure telling
them the new build dependency.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-10-peter.maydell@linaro.org
Message-id: 20190228145624.24885-10-peter.maydell@linaro.org
Use the "system" libslirp if its present or requested.
Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("git").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJccBqMAAoJECgfDbjSjVRpvSEIAKYPRNdCBX/SSS/L/tmJS5Zt
8IyU/HW1YJ249vO+aT6z4Q3QPgqNC3KjXC3brx/WRoPZnRroen4rv2Kqnk6SayPa
a52d2ubXKWxb3swdG1CAVzFRhq/ABpgAPx0dr1JW+RXgo2lxpJ4GNYxKMosQTaPE
hRNeXl1XlcIK525kJhFH3Hlij9mTRuY6T7ydpPQd8dUq2dBRaL9RrzZRrkZxCy6l
gQPUqNzPhG0XXyOiJmwYyVX0zGzbYrMLrMQAor2SBIYmU+zv2eZGPJUYxoMTUMzt
YR0WCpvkvPITlAryaBoozAIDYVz8PxBRT1KRwpDal+2rzlm6o+veKDiF8R46gn0=
=GzUz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, cleanups, tests
Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (26 commits)
pci: Sanity test minimum downstream LNKSTA
hw/smbios: fix offset of type 3 sku field
pci: Move NVIDIA vendor id to the rest of ids
virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
virtio-balloon: Rework ballon_page() interface
virtio-balloon: Corrections to address verification
virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
i386/kvm: ignore masked irqs when update msi routes
contrib/vhost-user-blk: fix the compilation issue
Revert "contrib/vhost-user-blk: fix the compilation issue"
pc-dimm: use same mechanism for [get|set]_addr
tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
tests/uefi-test-tools: add build scripts
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
roms: build the EfiRom utility from the roms/edk2 submodule
roms: add the edk2 project as a git submodule
vhost-user-test: create a temporary directory per TestServer
vhost-user-test: small changes to init_hugepagefs
vhost-user-test: create a main loop per TestServer
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In case no sound hardware is present both alsa and sdl drivers
initialize successfully and throw errors later on, i.e. effectively
the automatic probing doesn't work. Drop them from the list of
default audio drivers for linux because of that.
Fixes: 6a48541873 audio: probe audio drivers by default
Buglink: https://bugs.launchpad.net/qemu/+bug/1816052
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: David Hildenbrand <david@redhat.com>
Message-id: 20190219124257.3001-1-kraxel@redhat.com
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an authorization backend that talks to PAM to check whether the user
identity is allowed. This only uses the PAM account validation facility,
which is essentially just a check to see if the provided username is permitted
access. It doesn't use the authentication or session parts of PAM, since
that's dealt with by the relevant part of QEMU (eg VNC server).
Consider starting QEMU with a VNC server and telling it to use TLS with
x509 client certificates and configuring it to use an PAM to validate
the x509 distinguished name. In this example we're telling it to use PAM
for the QAuthZ impl with a service name of "qemu-vnc"
$ qemu-system-x86_64 \
-object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-pam,id=authz0,service=qemu-vnc \
-vnc :1,tls-creds=tls0,tls-authz=authz0
This requires an /etc/pam/qemu-vnc file to be created with the auth
rules. A very simple file based whitelist can be setup using
$ cat > /etc/pam/qemu-vnc <<EOF
account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow
EOF
The /etc/qemu/vnc.allow file simply contains one username per line. Any
username not in the file is denied. The usernames in this example are
the x509 distinguished name from the client's x509 cert.
$ cat > /etc/qemu/vnc.allow <<EOF
CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
EOF
More interesting would be to configure PAM to use an LDAP backend, so
that the QEMU authorization check data can be centralized instead of
requiring each compute host to have file maintained.
The main limitation with this PAM module is that the rules apply to all
QEMU instances on the host. Setting up different rules per VM, would
require creating a separate PAM service name & config file for every
guest. An alternative approach for the future might be to not pass in
the plain username to PAM, but instead combine the VM name or UUID with
the username. This requires further consideration though.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Detect all invalid configurations (e.g. mingw32 with vhost-user,
non-Linux with vhost-kernel). As a collateral benefit, all vhost-kernel
backends can be now disabled if one wants to reduce the attack surface.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1543851204-41186-6-git-send-email-pbonzini@redhat.com>
Message-Id: <1550165756-21617-7-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This shows a preexisting bug: if a KVM target did not have virtio-net enabled,
it would fail with undefined symbols when vhost was enabled. This must now
be fixed, lest targets that have no virtio-net fail to compile.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1543851204-41186-5-git-send-email-pbonzini@redhat.com>
Message-Id: <1550165756-21617-6-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/net/vhost_net.c needs functions that are declared in net/vhost-user.c: the
vhost-user code is always compiled into QEMU, only the constructor
net_init_vhost_user is unreachable. Also, net/vhost-user.c needs functions
declared in hw/virtio/vhost-stub.c even if no virtio device exists.
Break this dependency. First, add a minimal version of net/vhost-user.c,
with no functionality and no dependency on vhost code. Second, #ifdef out
the calls back to net/vhost-user.c from hw/net/vhost_net.c.
While at it, this patch fixes the CONFIG_VHOST_NET_USE*D* typo.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1543851204-41186-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1550165756-21617-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcZZvnAAoJENSXKoln91plz6UH/iqtHfPhGEj6o4CGFIx/8Ru/
k7XU552LgTGvIA1aHt9+dHNYWW/JRl1CvmdeECeAN/yFkKSdDmruW6hLV78dV6Jy
8xnnYt8bQhMfMSCIlkGh+CxFF0BCRoPrtH64ZVgZ9AnN00E6hyFlTHAYJEk8ZlcM
ov05JYneKlZWYDcJnYaGX6T7s8ALcq2O6FDUS88J9AiN303yt+kmaEC2WEt+xju4
+xPPBIIg8nqd3MlrQ/shpFcCOTN0OLQ4V5mQYLvbL3HGTzeZ8eYBRdqQ2DXpW8M8
OOFGhJrmfBYEC/me0T7suZnzLLNGGYz2jQWLlHy32COIAJv6GcUylGd9TDbGGP8=
=Py0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-feb-14-2019' into staging
MIPS queue for February 14th, 2019
# gpg: Signature made Thu 14 Feb 2019 16:48:39 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-feb-14-2019:
tests/tcg: target/mips: Add tests for MSA logic instructions
tests/tcg: target/mips: Add wrappers for MSA logic instructions
tests/tcg: target/mips: Add tests for MSA interleave instructions
tests/tcg: target/mips: Add wrappers for MSA interleave instructions
tests/tcg: target/mips: Add tests for MSA bit counting instructions
tests/tcg: target/mips: Add wrappers for MSA bit counting instructions
tests/tcg: target/mips: Add a header with test utilities
tests/tcg: target/mips: Add a header with test inputs
tests/tcg: target/mips: Remove an unnecessary file
target/mips: introduce MTTCG-enabled builds
hw/mips_cpc: kick a VP when putting it into Run statewq
target/mips: hold BQL in mips_vpe_wake()
hw/mips_int: hold BQL for all interrupt requests
target/mips: reimplement SC instruction emulation and use cmpxchg
target/mips: compare virtual addresses in LL/SC sequence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce MTTCG-enabled QEMU builds for mips32, mipsn32, and mips64.
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The current check to test if usbfs support should be compiled or not
solely relies on the presence of <linux/usbdevice_fs.h>, without
actually checking that all definition used by Qemu are provided by
this header file.
With sufficiently old kernel headers, <linux/usbdevice_fs.h> may be
present, but some of the definitions needed by Qemu may not be
available.
This commit improves the check by building a small program that
actually tests whether the necessary definitions are available.
In addition, it fixes a bug where have_usbfs was set to "yes"
regardless of the result of the test.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190213211827.20300-1-thomas.petazzoni@bootlin.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We have now managed to eradicate all the places in the codebase
that triggered clang's -Waddress-of-packed-member warning. Remove
the compiler flag that exempted it from our usual -Werror policy.
This will prevent any new problematic code being added in future.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190208132112.31493-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The NetBSD support in Intel HAXM has beem merged upstream and is functional.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Message-Id: <20190207233704.29978-1-n54@gmx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This looks like a leftover that was never implemented.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190207193605.25676-2-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
POSIX says that it is better to use &&/|| and two separate test
invocations than it is to try and use -a and -o (in fact, there
are some tests that are inherently ambiguous to parse if the
user passes in corner-case input like "(").
Since we cannot guarantee which shell runs configure, we cannot
rely on -o/-a always following bash's parser rules.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190205023937.18245-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The machine description we send is being (silently) thrown on the floor
by GDB and GDB silently uses the default machine description, because
the xml parse fails on <feature> nested within <feature>.
Changes to the xml in qemu source code have no effect.
In addition, the default machine description has fs_base, which fails to
be retrieved, which breaks the whole register window. Add it and the
other control registers.
Signed-off-by: Doug Gale <doug16k@gmail.com>
Message-Id: <20190124040457.2546-1-doug16k@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After this patch contrib/elf2dmp can be built for Windows x86 and x86_64
hosts by mingw.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20181220012441.13694-7-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On Linux (and maybe some BSDs), we require libutil for the openpty()
function. However, this library is not available on some other systems, so
we currently use a fragile if-statement in the configure script to check
whether we need the library or not. Unfortunately, we also hard-coded a
"-lutil" in the tests/Makefile.include file, so this breaks the build on
Solaris, for example (see buglink below). To fix the issue, add the "-lutil"
to "libs_tools" in the configure script instead, then this gets properly
propagated to the tests, too.
And while we're at it, also replace the fragile if-statement in the confi-
gure script with a proper link-check for the availability of this function.
Buglink: https://bugs.launchpad.net/qemu/+bug/1777252
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
