Add support for VHOST_USER_PROTOCOL_F_IN_BAND_NOTIFICATIONS, but
as it's not desired by default, don't enable it unless the device
implementation opts in by returning it from its protocol features
callback.
Note that I updated vu_set_vring_err_exec(), but didn't add any
sending of the VHOST_USER_SLAVE_VRING_ERR message as there's no
write to the err_fd today either.
This also adds vu_queue_notify_sync() which can be used to force
a synchronous notification if inband notifications are supported.
Previously, I had left out the slave->master direction handling
of F_REPLY_ACK, this now adds some code to support it as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Message-Id: <20200123081708.7817-7-johannes@sipsolutions.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If a new setmemtable command comes in once the vhost threads are
running, it will remap the guests address space and the threads
will now be looking in the wrong place.
Fortunately we're running this command under lock, so we can
update the queue mappings so that threads will look in the new-right
place.
Note: This doesn't fix things that the threads might be doing
without a lock (e.g. a readv/writev!) That's for another time.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In future patches we'll be performing commands on the slave-fd driven
by commands on queues, since those queues will be driven by individual
threads we need to make sure they don't attempt to use the slave-fd
for multiple commands in parallel.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently libvhost-user is hardcoded to at most 8 virtqueues. The
device backend should decide the number of virtqueues, not
libvhost-user. This is important for multiqueue device backends where
the guest driver needs an accurate number of virtqueues.
This change breaks libvhost-user and libvhost-user-glib API stability.
There is no stability guarantee yet, so make this change now and update
all in-tree library users.
This patch touches up vhost-user-blk, vhost-user-gpu, vhost-user-input,
vhost-user-scsi, and vhost-user-bridge. If the device has a fixed
number of queues that exact number is used. Otherwise the previous
default of 8 virtqueues is used.
vu_init() and vug_init() can now fail if malloc() returns NULL. I
considered aborting with an error in libvhost-user but it should be safe
to instantiate new vhost-user instances at runtime without risk of
terminating the process. Therefore callers need to handle the vu_init()
failure now.
vhost-user-blk and vhost-user-scsi duplicate virtqueue index checks that
are already performed by libvhost-user. This code would need to be
modified to use max_queues but remove it completely instead since it's
redundant.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190626074815.19994-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new vhost-user message to give a unix socket to a vhost-user
backend for GPU display updates.
Back when I started that work, I added a new GPU channel because the
vhost-user protocol wasn't bidirectional. Since then, there is a
vhost-user-slave channel for the slave to send requests to the master.
We could extend it with GPU messages. However, the GPU protocol is
quite orthogonal to vhost-user, thus I chose to have a new dedicated
channel.
See vhost-user-gpu.rst for the protocol details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
gcc_struct is for x86 only, and it generates an warning on ARM64 Clang/MinGW targets.
Signed-off-by: Cao Jiaxi <driver1998@foxmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190503003618.10089-1-driver1998@foxmail.com
[PMM: dropped the slirp change as slirp is now a submodule]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for VHOST_USER_GET_INFLIGHT_FD and
VHOST_USER_SET_INFLIGHT_FD message to set/get shared buffer
to/from qemu. Then backend can track inflight I/O in this buffer.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-5-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-input will make use of this function to undo some queue pop
in case the virtio queue does not have enough room.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190308140454.32437-11-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that the VhostUserMsg.request field is used for both master &
slave requests, since commit d84599f56c:
contrib/libvhost-user/libvhost-user.c:953:20: error: implicit conversion from enumeration type 'enum VhostUserSlaveRequest' to different enumeration type 'VhostUserRequest' (aka 'enum VhostUserRequest') [-Werror,-Wenum-conversion]
.request = VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190308140454.32437-2-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces the host notifier support in
libvhost-user. A new API is added to support setting
host notifier for each queue.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This message is sent just before the end of postcopy to get the
client to stop using userfault since we wont respond to any more
requests. It should close userfaultfd so that any other pages
get mapped to the backing file automatically by the kernel, since
at this point we know we've received everything.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notify the vhost-user slave on reception of the 'postcopy-listen'
event from the source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Open a userfaultfd (on a postcopy_advise) and send it back in
the reply to the qemu for it to monitor.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wire up a notifier to send a VHOST_USER_POSTCOPY_ADVISE
message on an incoming advise.
Later patches will fill in the behaviour/contents of the
message.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a vhost feature flag for postcopy support, and
use the postcopy notifier to check it before allowing postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The sg list/indirect descriptor table may be contigious
in GPA but not in HVA address space. But libvhost-user
wasn't aware of that. This would cause out-of-bounds
access. Even a malicious guest could use it to get
information from the vhost-user backend.
Introduce a plen parameter in vu_gpa_to_va() so we can
handle this case, returning the actual mapped length.
Signed-off-by: Yongji Xie <xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Enable VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages in
libvhost-user library, users can implement their own I/O target
based on the library. This enable the virtio config space delivered
between QEMU host device and the I/O target.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow the qemu to pass us a slave fd. We don't do anything
with it yet.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171002191521.15748-5-dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Update the ProtocolFeature and UserRequest lists to
match hw/virtio/vhost-user.c.
Fix the text labelling in libvhost-user.c to match the list.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171002191521.15748-4-dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add a vu_queue_started method to complement vu_queue_enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171002191521.15748-2-dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This is the same workaround as commit 523b018dde, which was lost
with libvhost-user transition in commit e10e798c85.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a vhost-user-scsi backend sample application. It
must be linked with libiscsi and libvhost-user.
To use it, compile with:
$ make vhost-user-scsi
And run as follows:
$ ./vhost-user-scsi -u vus.sock -i iscsi://uri_to_target/
$ qemu-system-x86_64 --enable-kvm -m 512 \
-object memory-backend-file,id=mem,size=512m,share=on,mem-path=guestmem \
-numa node,memdev=mem \
-chardev socket,id=vhost-user-scsi,path=vus.sock \
-device vhost-user-scsi-pci,chardev=vhost-user-scsi \
The application is currently limited at one LUN only and it processes
requests synchronously (therefore only achieving QD1). The purpose of
the code is to show how a backend can be implemented and to test the
vhost-user-scsi Qemu implementation.
If a different instance of this vhost-user-scsi application is executed
at a remote host, a VM can be live migrated to such a host.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-5-git-send-email-felipe@nutanix.com>
Calling libvhost-user functions like vu_queue_get_avail_bytes() when the
queue doesn't yet have addresses will result in the crashes like the
following:
Program received signal SIGSEGV, Segmentation fault.
0x000055c414112ce4 in vring_avail_idx (vq=0x55c41582fd68, vq=0x55c41582fd68)
at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:940
940 vq->shadow_avail_idx = vq->vring.avail->idx;
(gdb) p vq
$1 = (VuVirtq *) 0x55c41582fd68
(gdb) p vq->vring
$2 = {num = 0, desc = 0x0, avail = 0x0, used = 0x0, log_guest_addr = 0, flags = 0}
at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:940
No locals.
at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:960
num_heads = <optimized out>
out_bytes=out_bytes@entry=0x7fffd035d7c4, max_in_bytes=max_in_bytes@entry=0,
max_out_bytes=max_out_bytes@entry=0) at /home/dgilbert/git/qemu/contrib/libvhost-user/libvhost-user.c:1034
Add a pre-condition checks on vring.avail before accessing it.
Fix documentation and return type of vu_queue_empty() while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a library to help implementing vhost-user backend (or slave).
Dealing with vhost-user as an application developer isn't so easy: you
have all the trouble with any protocol: validation, unix ancillary data,
shared memory, eventfd, logging, and on top of that you need to deal
with virtio queues, if possible efficiently.
qemu test has a nice vhost-user testing application vhost-user-bridge,
which implements most of vhost-user, and virtio.c which implements
virtqueues manipulation. Based on these two, I tried to make a simple
library, reusable for tests or development of new vhost-user scenarios.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Felipe: set used_idx copy on SET_VRING_ADDR and update shadow avail idx
on SET_VRING_BASE]
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
