Commit Graph

757 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé
51500d3770 Revert "hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit"
This reverts commit 3ae0343db6.

Stephen Checkoway noticed commit 3ae0343db6 is incorrect.
This commit state all parallel flashes are limited to 16-bit
accesses, however the x32 configuration exists in some models,
such the Cypress S29CL032J, which CFI Device Geometry Definition
announces:

  CFI ADDR     DATA
  0x28,0x29 = 0x0003 (x32-only asynchronous interface)

Guests should not be affected by the previous change, because
QEMU does not announce itself as x32 capable:

    /* Flash device interface (8 & 16 bits) */
    pfl->cfi_table[0x28] = 0x02;
    pfl->cfi_table[0x29] = 0x00;

Commit 3ae0343db6 does not restrict the bus to 16-bit accesses,
but restrict the implementation as 16-bit access max, so a guest
32-bit access will result in 2x 16-bit calls.

Now, we have 2 boards that register the flash device in 32-bit
access:

- PPC: taihu_405ep

  The CFI id matches the S29AL008J that is a 1MB in x16, while
  the code QEMU forces it to be 2MB, and checking Linux it expects
  a 4MB flash.

- ARM: Digic4

  While the comment says "Samsung K8P3215UQB 64M Bit (4Mx16)",
  this flash is 32Mb (2MB). Also note the CFI id does not match
  the comment.

To avoid unexpected side effect, we revert commit 3ae0343db6,
and will clean the board code later.

Reported-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-09 17:14:39 +02:00
Peter Maydell
c35d17cabc virtio, pc, pci: features, fixes, cleanups
virtio-pmem support.
 libvhost user mq support.
 A bunch of fixes all over the place.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEbBAABAgAGBQJdHmkBAAoJECgfDbjSjVRpEAIH+Kmy8n5Et9NzsnmNqHAiC/pg
 3V5wGyp9M4ZJVPXC0z/Q1sYJ3YYP6dBd4tjj2/7LzYZSlqlQIs83UlQCo0XTiliH
 /jZD/IaAZABnfB7vAeZW67WNT2a20xG2Jr83083lSaDUI/pfIdvbMelIbBLmo/kd
 tWdAAWT0kcGYjyz4xQQgtAH6zAQUleKE7ECUJ2TpJQbSMLxdI/YTaoYqek471YdP
 ju5OLBO3WbNkSE9JYz4MJqTudYK0sKu568UqBVF8JdpFd5Cv+X/OI+bCsc4QK8KN
 DTtFVVvbm1KGPSceqc9rwsDjO4Wd8ThvuZxrB029AahD6vT82F13IHpi/S29Fw==
 =WAFb
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc, pci: features, fixes, cleanups

virtio-pmem support.
libvhost user mq support.
A bunch of fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 04 Jul 2019 22:00:49 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (22 commits)
  docs: avoid vhost-user-net specifics in multiqueue section
  libvhost-user: implement VHOST_USER_PROTOCOL_F_MQ
  libvhost-user: support many virtqueues
  libvhost-user: add vmsg_set_reply_u64() helper
  pc: Move compat_apic_id_mode variable to PCMachineClass
  virtio: Don't change "started" flag on virtio_vmstate_change()
  virtio: Make sure we get correct state of device on handle_aio_output()
  virtio: Set "start_on_kick" on virtio_set_features()
  virtio: Set "start_on_kick" for legacy devices
  virtio: add "use-started" property
  virtio-pci: fix missing device properties
  pc: Support for virtio-pmem-pci
  numa: Handle virtio-pmem in NUMA stats
  hmp: Handle virtio-pmem when printing memory device infos
  virtio-pci: Proxy for virtio-pmem
  virtio-pmem: sync linux headers
  virtio-pci: Allow to specify additional interfaces for the base type
  virtio-pmem: add virtio device
  pcie: minor cleanups for slot control/status
  pcie: work around for racy guest init
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-05 09:51:50 +01:00
Xie Yongji
e57f2c31b6 virtio: add "use-started" property
In order to avoid migration issues, we introduce a "use-started"
property to the base virtio device to indicate whether use
"started" flag or not. This property will be true by default and
set to false when machine type <= 4.0.

Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190626023130.31315-2-xieyongji@baidu.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04 17:00:32 -04:00
Peter Maydell
374f63f681 Monitor patches for 2019-07-02
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl0bQhUSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTOgoP/3v1ZAg4ulTrUx/KO8C80sA3qqaPgkbP
 s8DFUwtjWcDrefGejIep4C0dxhY5vD1oNg9JeK+6O4IInijlg30kildBj85nPa5J
 Z55hZFIGWW1CSMzeSlOMWH1QdYdGPXkGRe8ApXPqRH4VpsdulC+vErQl1YrleNtv
 B8K8402hMOKL+TsheBpdnbM+1hXRj8zBGfobiY/9eLex30uaNDVOd3bIpx0M63fr
 kcwOOPKQeUTLPbUvI6mVQtTkNFCzk6Wmi5vMyT3bSe2ZMLNnEFQZXabcgSBverTK
 9ar5MxTMHIplstWVQEceXN3BLVlIsmunUsuCSHqmX6tdX37EKiJXZImiz0i98bnq
 5SFNAHntr3JDMdqqZJX+v1DvmGbPfv/H5poWk+wQfFBkjDykExEd77v9kuOc4aVZ
 HkEYNbAPVTjfm5xXxn8yXdY++tVsQKV4q2T4OX9WacMu5sJujDm9qIlVaE2A3Cdc
 ePM4tNrHJ0MNDHn2CG/wPEaLelfylLlL/Aai/WQe/YPVrVOHroT4zvwVv6+QJB2k
 MWqmRzGEOYDevPs8PizPetEHiirTHyrIufuleFJglBVSNi5V2LpG5d97Pal0Dn2k
 1ZzSnonXGnhx7VoaqbxhAEj8vAI42gJJ3Q/f6VW2q2rBAv4/oc9jeQVx1SYGFKCu
 QbNALrVpyv+5
 =jtpi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2019-07-02-v2' into staging

Monitor patches for 2019-07-02

# gpg: Signature made Tue 02 Jul 2019 12:37:57 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2019-07-02-v2:
  dump: Move HMP command handlers to dump/
  MAINTAINERS: Add Windows dump to section "Dump"
  dump: Move the code to dump/
  qapi: Split dump.json off misc.json
  qapi: Rename target.json to misc-target.json
  qapi: Split machine-target.json off target.json and misc.json
  hw/core: Collect HMP command handlers in hw/core/
  hw/core: Collect QMP command handlers in hw/core/
  hw/core: Move numa.c to hw/core/
  qapi: Split machine.json off misc.json
  MAINTAINERS: Merge sections CPU, NUMA into Machine core
  qom: Move HMP command handlers to qom/
  qom: Move QMP command handlers to qom/
  qapi: Split qom.json and qdev.json off misc.json
  hmp: Move hmp.h to include/monitor/
  Makefile: Don't add monitor/ twice to common-obj-y
  MAINTAINERS: Make section "QOM" cover qdev as well
  MAINTAINERS: new maintainers for QOM

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03 00:16:43 +01:00
Markus Armbruster
c577ff624f qapi: Split qom.json and qdev.json off misc.json
Move commands object-add, object-del, qom-get, qom-list,
qom-list-properties, qom-list-types, and qom-set with their types from
misc.json to new qom.json.

Move commands device-list-properties, device_add, device-del, and
event DEVICE_DELETED from misc.json to new qdev.json.

Add both new files to MAINTAINERS section QOM.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-5-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Straightforwardly updated for "MAINTAINERS: Make section "QOM" cover
qdev as well"]
2019-07-02 07:19:57 +02:00
Philippe Mathieu-Daudé
3ae0343db6 hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit
Parallel NOR flashes are limited to 16-bit bus accesses.
Remove the 32-bit dead code.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190627202719.17739-29-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:34:55 +02:00
Philippe Mathieu-Daudé
b034993717 hw/block/pflash_cfi02: Document commands
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190627202719.17739-28-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:34:55 +02:00
Stephen Checkoway
80f2c625cb hw/block/pflash_cfi02: Use chip erase time specified in the CFI table
When erasing the chip, use the typical time specified in the CFI table
rather than arbitrarily selecting 5 seconds.

Since the currently unconfigurable value set in the table is 12, this
means a chip erase takes 4096 ms so this isn't a big change in behavior.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-11-stephen.checkoway@oberlin.edu>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:34:55 +02:00
Stephen Checkoway
ddb6f22548 hw/block/pflash_cfi02: Implement erase suspend/resume
During a sector erase (but not a chip erase), the embeded erase program
can be suspended. Once suspended, the sectors not selected for erasure
may be read and programmed. Autoselect mode is allowed during erase
suspend mode. Presumably, CFI queries are similarly allowed so this
commit allows them as well.

Since guest firmware can use status bits DQ7, DQ6, DQ3, and DQ2 to
determine the current state of sector erasure, these bits are properly
implemented.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-10-stephen.checkoway@oberlin.edu>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:34:55 +02:00
Stephen Checkoway
a50547aca5 hw/block/pflash_cfi02: Implement multi-sector erase
After two unlock cycles and a sector erase command, the AMD flash chips
start a 50 us erase time out. Any additional sector erase commands add a
sector to be erased and restart the 50 us timeout. During the timeout,
status bit DQ3 is cleared. After the time out, DQ3 is asserted during
erasure.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-9-stephen.checkoway@oberlin.edu>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:34:55 +02:00
Stephen Checkoway
a979104239 hw/block/pflash_cfi02: Fix reset command not ignored during erase
When the flash device is performing a chip erase, all commands are
ignored. When it is performing a sector erase, only the erase suspend
command is valid, which is currently not supported.

In particular, the reset command should not cause the device to reset to
read array mode while programming is on going.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-8-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:34:51 +02:00
Stephen Checkoway
46fb7809b5 hw/block/pflash_cfi02: Fix CFI in autoselect mode
After a flash device enters CFI mode from autoselect mode, the reset
command returns the device to autoselect mode. An additional reset
command is necessary to return to read array mode.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-7-stephen.checkoway@oberlin.edu>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:32:39 +02:00
Philippe Mathieu-Daudé
8a508e7064 hw/block/pflash_cfi02: Split if() condition
Split the if() condition check and arrange the indentation to
ease the review of the next patches. No logical change.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190627202719.17739-21-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:32:39 +02:00
Philippe Mathieu-Daudé
102f0f79a5 hw/block/pflash_cfi02: Extract pflash_regions_count()
Extract the pflash_regions_count() function, the code will be
easier to review.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190627202719.17739-20-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:32:39 +02:00
Stephen Checkoway
6465905355 hw/block/pflash_cfi02: Implement nonuniform sector sizes
Some flash chips support sectors of different sizes. For example, the
AMD AM29LV160DT has 31 64 kB sectors, one 32 kB sector, two 8 kB
sectors, and a 16 kB sector, in that order. The AM29LV160DB has those in
the reverse order.

The `num-blocks` and `sector-length` properties work exactly as they did
before: a flash device with uniform sector lengths. To get non-uniform
sector lengths for up to four regions, the following properties may be
set
- region 0. `num-blocks0` and `sector-length0`;
- region 1. `num-blocks1` and `sector-length1`;
- region 2. `num-blocks2` and `sector-length2`; and
- region 3. `num-blocks3` and `sector-length3`.

If the uniform and nonuniform properties are set, then both must specify
a flash device with the same total size. It would be better to disallow
both being set, or make `num-blocks0` and `sector-length0` alias
`num-blocks` and `sector-length`, but that would make testing currently
impossible.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-6-stephen.checkoway@oberlin.edu>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Rebased, add assert() on pri_offset]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:32:26 +02:00
Philippe Mathieu-Daudé
c2c1bf44a9 hw/block/pflash_cfi02: Document 'Page Mode' operations are not supported
The 'page mode' feature entry was implicitly set as zero
(not supported). Document it exists, so we won't discard
it if we squeeze the CFI table.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-6-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
d6874c8391 hw/block/pflash_cfi02: Hold the PRI table offset in a variable
Manufacturers are allowed to move the PRI table, this is why the
offset is queryable via fixed offsets 0x15/0x16.
Add a variable to hold the offset, so it will be easier to later
move the PRI table.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190627202719.17739-17-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
9ac45b886a hw/block/pflash_cfi02: Document the current CFI values
Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-6-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch]
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
1eb27d692e hw/block/pflash_cfi02: Remove pointless local variable
We can directly use pfl->total_len, remove the local 'chip_len'
variable.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-6-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Stephen Checkoway
6682bc1ee4 hw/block/pflash_cfi02: Fix command address comparison
Most AMD commands only examine 11 bits of the address. This masks the
addresses used in the comparison to 11 bits. The exceptions are word or
sector addresses which use offset directly rather than the shifted
offset, boff.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-4-stephen.checkoway@oberlin.edu>
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
aff498cf30 hw/block/pflash_cfi02: Unify the MemoryRegionOps
The pflash_read()/pflash_write() can check the device endianess
via the pfl->be variable, so remove the 'int be' argument.

Since the big/little MemoryRegionOps are now identical, it is
pointless to declare them both. Unify them.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch to ease review]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
06e8b8e3e1 hw/block/pflash_cfi02: Extract the pflash_data_read() function
Extract the code block in a new function, remove a goto statement.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch, remove the XXX tracing comment]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
3e4bcf89b7 hw/block/pflash_cfi02: Use the ldst API in pflash_read()
The load/store API eases code review.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch, simplified tracing]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
c3d25271b2 hw/block/pflash_cfi02: Use the ldst API in pflash_write()
The load/store API eases code review.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
7f7bdcaff5 hw/block/pflash_cfi02: Simplify a statement using fall through
Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
1d311e738b hw/block/pflash_cfi02: Add helpers to manipulate the status bits
Pull out all of the code to modify the status into simple helper
functions. Status handling becomes more complex once multiple
chips are interleaved to produce a single device.

No change in functionality is intended with this commit.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
aeaf6c20db hw/block/pflash_cfi02: Add an enum to define the write cycles
No change in functionality is intended with this commit.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:13 +02:00
Philippe Mathieu-Daudé
6536987fd6 hw/block/pflash_cfi02: Fix debug format string
Always compile the debug code to prevent format string to bitrot.
Delete dead code.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-3-stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Extracted from bigger patch, use PRIx32]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:31:01 +02:00
Philippe Mathieu-Daudé
c1474acd5d hw/block/pflash: Simplify trace_pflash_data_read/write()
Use a field width format to have a single function to log
the different width accesses.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190627202719.17739-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:16:50 +02:00
Philippe Mathieu-Daudé
e8aa2d95ea hw/block/pflash: Simplify trace_pflash_io_read/write()
Call the read() trace function after the value is set, so we can
log the returned value.
Rename the I/O trace functions with '_io_' in their name.

Reviewed-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190627202719.17739-3-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-02 02:16:50 +02:00
Peter Maydell
ab67678a59 Xen queue
* Fix build
 * xen-block: support feature-large-sector-size
 * xen-block: Support IOThread polling for PV shared rings
 * Avoid usage of a VLA
 * Cleanup Xen headers usage
 -----BEGIN PGP SIGNATURE-----
 
 iQFOBAABCgA4FiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAl0Q7JgaHGFudGhvbnku
 cGVyYXJkQGNpdHJpeC5jb20ACgkQDPVXL9f7Va8B1wf/bL9gdT/1R9474ZfbWAGZ
 KzkCo0C3jXUWRXd9z/UVwkmOhz0tLj1otx0fR+HFM4An+YAY6D0oZAKO9SCHhGDQ
 XflAK74dw1ieuZI+3Q5PXQO5xM1Oz0J+3TGlOFdZlh5UD68mEzteGnzU/zzs7i4E
 AZiKVOdO4YzMdHLVO4X/AqZH48n82FxjKcog7cZ9fTqDUz8SZGwJVSWocUZ0yOWb
 uhAacvhwHeZj64NuNShyF/RM7jolTk4CZWJv8Gy9CPxOM7noQIv0ttwu+QWCmODg
 pdTxd8HrE4rTnKaQFiHVas/AZ3cOfRw9RjdsARhXtGJq8AaQag9Q0iLZpyBYBfsF
 6w==
 =MDEA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20190624' into staging

Xen queue

* Fix build
* xen-block: support feature-large-sector-size
* xen-block: Support IOThread polling for PV shared rings
* Avoid usage of a VLA
* Cleanup Xen headers usage

# gpg: Signature made Mon 24 Jun 2019 16:30:32 BST
# gpg:                using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg:                issuer "anthony.perard@citrix.com"
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal]
# gpg:                 aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A  7161 D8D5 7199 DF83 42C8
#      Subkey fingerprint: F80C 0063 08E2 2CFD 8A92  E798 0CF5 572F D7FB 55AF

* remotes/aperard/tags/pull-xen-20190624:
  xen: Import other xen/io/*.h
  Revert xen/io/ring.h of "Clean up a few header guard symbols"
  xen: Drop includes of xen/hvm/params.h
  xen: Avoid VLA
  xen-bus / xen-block: add support for event channel polling
  xen-bus: allow AioContext to be specified for each event channel
  xen-bus: use a separate fd for each event channel
  xen-block: support feature-large-sector-size

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01 13:03:51 +01:00
Klaus Birkelund Jensen
1cc354ac98 nvme: do not advertise support for unsupported arbitration mechanism
The device mistakenly reports that the Weighted Round Robin with Urgent
Priority Class arbitration mechanism is supported.

It is not.

Signed-off-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com>
Message-id: 20190606092530.14206-1-klaus@birkelund.eu
Acked-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-24 15:53:01 +02:00
Anthony PERARD
a3434a2d56 xen: Import other xen/io/*.h
A Xen public header have been imported into QEMU (by
f65eadb639 "xen: import ring.h from xen"), but there are other header
that depends on ring.h which come from the system when building QEMU.

This patch resolves the issue of having headers from the system
importing a different copie of ring.h.

This patch is prompt by the build issue described in the previous
patch: 'Revert xen/io/ring.h of "Clean up a few header guard symbols"'

ring.h and the new imported headers are moved to
"include/hw/xen/interface" as those describe interfaces with a guest.

The imported headers are cleaned up a bit while importing them: some
part of the file that QEMU doesn't use are removed (description
of how to make hypercall in grant_table.h have been removed).

Other cleanup:
- xen-mapcache.c and xen-legacy-backend.c don't need grant_table.h.
- xenfb.c doesn't need event_channel.h.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190621105441.3025-3-anthony.perard@citrix.com>
2019-06-24 10:42:30 +01:00
Paul Durrant
345f42b4be xen-bus / xen-block: add support for event channel polling
This patch introduces a poll callback for event channel fd-s and uses
this to invoke the channel callback function.

To properly support polling, it is necessary for the event channel callback
function to return a boolean saying whether it has done any useful work or
not. Thus xen_block_dataplane_event() is modified to directly invoke
xen_block_handle_requests() and the latter only returns true if it actually
processes any requests. This also means that the call to qemu_bh_schedule()
is moved into xen_block_complete_aio(), which is more intuitive since the
only reason for doing a deferred poll of the shared ring should be because
there were previously insufficient resources to fully complete a previous
poll.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190408151617.13025-4-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-24 10:42:29 +01:00
Paul Durrant
83361a8a1f xen-bus: allow AioContext to be specified for each event channel
This patch adds an AioContext parameter to xen_device_bind_event_channel()
and then uses aio_set_fd_handler() to set the callback rather than
qemu_set_fd_handler().

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190408151617.13025-3-paul.durrant@citrix.com>
[Call aio_set_fd_handler() with is_external=true]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-24 10:42:29 +01:00
Paul Durrant
5feeb718d7 xen-block: support feature-large-sector-size
A recent Xen commit [1] clarified the semantics of sector based quantities
used in the blkif protocol such that it is now safe to create a xen-block
device with a logical_block_size != 512, as long as the device only
connects to a frontend advertizing 'feature-large-block-size'.

This patch modifies xen-block accordingly. It also uses a stack variable
for the BlockBackend in xen_block_realize() to avoid repeated dereferencing
of the BlockConf pointer, and changes the parameters of
xen_block_dataplane_create() so that the BlockBackend pointer and sector
size are passed expicitly rather than implicitly via the BlockConf.

These modifications have been tested against a recent Windows PV XENVBD
driver [2] using a xen-disk device with a 4kB logical block size.

[1] http://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=67e1c050e36b2c9900cca83618e56189effbad98
[2] https://winpvdrvbuild.xenproject.org:8080/job/XENVBD-master/126

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190409164038.25484-1-paul.durrant@citrix.com>
[Edited error message]
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-24 10:42:29 +01:00
Andrey Shinkevich
6653d1318d hw/block/fdc: floppy command FIFO memory initialization
The uninitialized memory allocated for the command FIFO of the
floppy controller during the VM hardware initialization incurs
many unwanted reports by Valgrind when VM state is being saved.
That verbosity hardens a search for the real memory issues when
the iotests run. Particularly, the patch eliminates 20 unnecessary
reports of the Valgrind tool in the iotest #169.

Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-id: 1559154027-282547-1-git-send-email-andrey.shinkevich@virtuozzo.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-06-14 14:16:57 +02:00
Markus Armbruster
a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Markus Armbruster
0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Kevin Wolf
d861ab3acf block: Add BlockBackend.ctx
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).

The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
Kevin Wolf
97896a4887 block: Add Error to blk_set_aio_context()
Add an Error parameter to blk_set_aio_context() and use
bdrv_child_try_set_aio_context() internally to check whether all
involved nodes can actually support the AioContext switch.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
Kenneth Heitke
3036a626e9 nvme: add Get/Set Feature Timestamp support
Signed-off-by: Kenneth Heitke <kenneth.heitke@intel.com>
Reviewed-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:09 +02:00
Xie Yongji
77542d4314 vhost-user-blk: Add support to reconnect backend
Since we now support the message VHOST_USER_GET_INFLIGHT_FD
and VHOST_USER_SET_INFLIGHT_FD. The backend is able to restart
safely because it can track inflight I/O in shared memory.
This patch allows qemu to reconnect the backend after
connection closed.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Ni Xun <nixun@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-7-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Xie Yongji
a57f009108 vhost-user-blk: Add return value for vhost_user_blk_start()
Add a return value for vhost_user_blk_start() to check whether
we start vhost-user backend successfully or not.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-6-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Xie Yongji
f3facbe671 vhost-user-blk: Only start vhost-user backend with the first kick
We should only start vhost-user backend at the first kick for
virtio 1.0 transitional devices.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-5-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Xie Yongji
96cb549817 vhost-user-blk: Use started flag in vhost_user_blk_set_status()
Use started flag in vhost_user_blk_set_status() to decide if
starting vhost-user backend or not.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-4-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Klaus Birkelund Jensen
25349e8250 nvme: fix copy direction in DMA reads going to CMB
`nvme_dma_read_prp` erronously used `qemu_iovec_*to*_buf` instead of
`qemu_iovec_*from*_buf` when the request involved the controller memory
buffer.

Signed-off-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com>
Reviewed-by: Kenneth Heitke <kenneth.heitke@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-20 17:08:56 +02:00
Markus Armbruster
2d731dbd5e pflash_cfi01: New pflash_cfi01_legacy_drive()
Factored out of pc_system_firmware_init() so the next commit can reuse
it in hw/arm/virt.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190416091348.26075-3-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-07 12:55:02 +01:00
Paul Durrant
2bcd05cf24 xen-block: scale sector based quantities correctly
The Xen blkif protocol requires that sector based quantities should be
interpreted strictly as multiples of 512 bytes. Specifically:

"first_sect and last_sect in blkif_request_segment, as well as
sector_number in blkif_request, are always expressed in 512-byte units."

Commit fcab2b464e "xen: add header and build dataplane/xen-block.c"
incorrectly modified behaviour to use the block device logical_block_size
property as the scale, instead of correctly shifting values by the
hardcoded BDRV_SECTOR_BITS (and hence scaling them to 512 byte units).
This patch undoes that change and restores compliance with the spec.

Furthermore, this patch also restores the original xen_disk behaviour
of advertizing a hardcoded 'sector-size' value of 512 in xenstore and
scaling 'sectors' accordingly. The realize() method is also modified to
fail if logical_block_size is set to anything other than 512.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190401121719.27208-1-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-04-04 18:00:07 +01:00
Paul Durrant
15f084505a xen-block: only advertize discard to the frontend when it is enabled...
...and properly enable it when synthesizing a drive.

The Xen toolstack sets 'discard-enable' to '1' in xenstore when it wants
to enable discard on a specified image. The code in
xen_block_drive_create() correctly parses this and uses it to set
'discard' to 'unmap' for the file_layer, but fails to do the same for the
driver_layer (which effectively disables it). Meanwhile the code in
xen_block_realize() advertizes discard support to the frontend in the
default case (because conf->discard_granularity defaults to -1), even when
the underlying image may not handle it.

This patch adds the missing option to the driver_layer in
xen_block_driver_create() and checks whether BDRV_O_UNMAP is actually
set on the block device before advertizing discard to the frontend.
In the case that discard is supported it also makes sure that the
granularity is set to the physical block size.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190320142825.24565-1-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-04-04 12:41:23 +01:00
Peter Maydell
527266f324 Pflash and firmware configuration patches for 2019-03-26
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcmdLpAAoJEDhwtADrkYZTYZEP/iTvwRlatm2D6aN4tdkerXsu
 acKXlL+JPHMqNy4g/bSiJ9lw6JMK1fiQRL+7v/RARiUCtDVmmrV6zzdH/0u4JqmI
 cixSVVRnFEcy6Q4ex4J97APOKcTH1G5+s1Tq8bHz3NitKMGyeDd9CwmdP2k0lrU6
 981eUfjsfqXxxrJdxT3iZ3VqU/vxxUL1nUL/sn1pivmMiWD0D1opw6cmgzylsEYx
 FxcWzieXrYxJfnvxWX6MtoNxsZqSqWHWlecDwAVFJ1OUVLxyd47h+9f54asYZefF
 bFoVNN2Yz6TPFnuF1S4WgMfyUE2UYPo7pN/OasPcnKjL5VLHOy+wayQx+YeC5PYz
 cnBfXV3Z9TOi+AINhKCDYxUX+WT0cpjqFdSWfqIBWz+4hKOsUoiCNvc+GjOO4nWg
 OA4A6zT8XQ9JipvhZvwWmb+cWFZNUBbJqewlWOBxh9j/az3CSNKRG9QWSJMar9jy
 lAHARZF0fEKNwgDCldppelMRZYrFeFVcpFdBha3H1EvixkrK4u/7GiyP+PqVPFVP
 6b27n7sh11/xk5Tal9K6cvYaRY1mmenTWXXx42D2IFShchSOe6U/181B8KBvB0LH
 nCAYV02XI3I+EkuzagifjwvNrU3hkTRbpfBCpsSQ992STdEUI4yNGm9biXo4OxDI
 l0DORlj2xnxoNh1tD/7X
 =aGX9
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-pflash-2019-03-26' into staging

Pflash and firmware configuration patches for 2019-03-26

# gpg: Signature made Tue 26 Mar 2019 07:21:13 GMT
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-pflash-2019-03-26:
  pflash: Bury disabled code to limit device sizes
  pflash: Require backend size to match device, improve errors

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-26 09:57:07 +00:00
Alex Bennée
3f905a5bba pflash: Bury disabled code to limit device sizes
We disabled code to limit device sizes to 8, 16, 32 or 64MiB more than
a decade ago in commit 95d1f3edd5 and c8b153d794, v0.9.1.  Bury.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[Extracted from a larger patch, extended to pflash_cfi02.c]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190319163551.32499-3-armbru@redhat.com>
2019-03-26 08:16:24 +01:00
Markus Armbruster
06f1521795 pflash: Require backend size to match device, improve errors
We reject undersized backends with a rather enigmatic "failed to read
the initial flash content" error.  For instance:

    $ qemu-system-ppc64 -S -display none -M sam460ex -drive if=pflash,format=raw,file=eins.img
    qemu-system-ppc64: Initialization of device cfi.pflash02 failed: failed to read the initial flash content

We happily accept oversized images, ignoring their tail.  Throwing
away parts of firmware that way is pretty much certain to end in an
even more enigmatic failure to boot.

Require the backend's size to match the device's size exactly.  Report
mismatch like this:

    qemu-system-ppc64: Initialization of device cfi.pflash01 failed: device requires 1048576 bytes, block backend provides 512 bytes

Improve the error for actual read failures to "can't read block
backend".

To avoid duplicating even more code between the two pflash device
models, do all that in new helper blk_check_size_and_read_all().

The error reporting can still be confusing.  For instance:

    qemu-system-ppc64 -S -display none -M taihu -drive if=pflash,format=raw,file=eins.img  -drive if=pflash,unit=1,format=raw,file=zwei.img
    qemu-system-ppc64: Initialization of device cfi.pflash02 failed: device requires 2097152 bytes, block backend provides 512 bytes

Leaves the user guessing which of the two -drive is wrong.  Mention
the issue in a TODO comment.

Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190319163551.32499-2-armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-26 08:16:24 +01:00
Markus Armbruster
ad85b0b4c7 xen-block: Replace qdict_put_obj() by qdict_put() where appropriate
Patch created mechanically by rerunning:

    $ spatch --sp-file scripts/coccinelle/qobject.cocci \
             --macro-file scripts/cocci-macro-file.h \
             --dir hw/block --in-place

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190313174433.12966-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2019-03-26 08:10:11 +01:00
Markus Armbruster
dec9776049 trace-events: Fix attribution of trace points to source
Some trace points are attributed to the wrong source file.  Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.

Clean up with help of cleanup-trace-events.pl.  Same funnies as in the
previous commit, of course.  Manually shorten its change to
linux-user/trace-events to */signal.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Markus Armbruster
a9779a3ab0 trace-events: Delete unused trace points
Tracked down with cleanup-trace-events.pl.  Funnies requiring manual
post-processing:

* block.c and blockdev.c trace points are in block/trace-events.

* hw/block/nvme.c uses the preprocessor to hide its trace point use
  from cleanup-trace-events.pl.

* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.

* net/colo-compare and net/filter-rewriter.c use pseudo trace points
  colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard
  debug code.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-5-armbru@redhat.com
Message-Id: <20190314180929.27722-5-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Markus Armbruster
500016e5db trace-events: Shorten file names in comments
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files.  That's because when trace-events got split up, the
comments were moved verbatim.

Delete the sub/dir/ part from these comments.  Gets rid of several
misspellings.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22 16:18:07 +00:00
Peter Maydell
3b5b6e9b51 pci, pc, virtio: features, fixes, cleanups
intel-iommu scalable option
 pcie acs emulation
 beginning for vhost-user-blk reconnect and of vhost-user backend work
 misc fixes and cleanups
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJciHBSAAoJECgfDbjSjVRpoxkH/2NvGGZo+fSAIjVcEOe9BKZx
 XeI4X51QnqOqur3GktoHQzpMYCGxYy653AE69aoO1JVOXsoJS2py0SKw5VIa9bnh
 BeZwXGmf1/rySC+iFc5oSNxHv7vS2o40ccwrkeKoqbbzrnLPIYQs/yyfJG/m0HtS
 xj0zSN6rTY8xxiJYVQftav3ylqInIr3d14WoJcIP3ksiOVtuQ1yjDJnJdKCZvLMk
 4dtFuQJpownQrOZ0jfXXvpWu2VUC2ZuBd4ylTK3IiqBRjfaU4/wIq6ySMsU1evLy
 chcAykqY0jt5nz339K2HgquUtcuE3LsKi3igqTZMKi2vb3SLQFnPBO0DUyjXvGg=
 =gusE
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: features, fixes, cleanups

intel-iommu scalable option
pcie acs emulation
beginning for vhost-user-blk reconnect and of vhost-user backend work
misc fixes and cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 13 Mar 2019 02:52:02 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (26 commits)
  i386, acpi: check acpi_memory_hotplug capacity in pre_plug
  gen_pcie_root_port: Add ACS (Access Control Services) capability
  pcie: Add a simple PCIe ACS (Access Control Services) helper function
  vhost-user-blk: Add support to get/set inflight buffer
  libvhost-user: Support tracking inflight I/O in shared memory
  libvhost-user: Introduce vu_queue_map_desc()
  libvhost-user: Remove unnecessary FD flag check for event file descriptors
  vhost-user: Support transferring inflight buffer between qemu and backend
  nvdimm: use NVDIMM_ACPI_IO_LEN for the proper IO size
  nvdimm: use *function* directly instead of allocating it again
  nvdimm: fix typo in nvdimm_build_nvdimm_devices argument
  intel_iommu: add scalable-mode option to make scalable mode work
  intel_iommu: add 256 bits qi_desc support
  intel_iommu: scalable mode emulation
  libvhost-user: add vu_queue_unpop()
  libvhost-user-glib: export vug_source_new()
  vhost-user: split vhost_user_read()
  vhost-user: wrap some read/write with retry handling
  libvhost-user: exit by default on VHOST_USER_NONE
  vhost-user: simplify vhost_user_init/vhost_user_cleanup
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-13 19:10:40 +00:00
Xie Yongji
a1fe0b8f27 vhost-user-blk: Add support to get/set inflight buffer
This patch adds support for vhost-user-blk device to get/set
inflight buffer from/to backend.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-6-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12 22:31:21 -04:00
Marc-André Lureau
0b99f22461 vhost-user: simplify vhost_user_init/vhost_user_cleanup
Take a VhostUserState* that can be pre-allocated, and initialize it
with the associated chardev.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Message-Id: <20190308140454.32437-4-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-12 21:22:31 -04:00
Keith Busch
9d6459d21a nvme: fix write zeroes offset and count
The implementation used blocks units rather than the expected bytes.

Fixes: c03e7ef12a ("nvme: Implement Write Zeroes")
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-12 20:30:14 +01:00
Philippe Mathieu-Daudé
e60cf76549 pflash_cfi01: Add pflash_cfi01_get_blk() helper
Add an helper to access the opaque struct PFlashCFI01.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190308131445.17502-9-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-11 22:53:44 +01:00
Markus Armbruster
ce14710f4f pflash: Clean up after commit 368a354f02, part 2
Our pflash devices are simplistically modelled has having
"num-blocks" sectors of equal size "sector-length".  Real hardware
commonly has sectors of different sizes.  How our "sector-length"
property is related to the physical device's multiple sector sizes
is unclear.

Helper functions pflash_cfi01_register() and pflash_cfi02_register()
create a pflash device, set properties including "sector-length" and
"num-blocks", and realize.  They take parameters @size, @sector_len
and @nb_blocs.

QOMification left parameter @size unused.  Obviously, @size should
match @sector_len and @nb_blocs, i.e. size == sector_len * nb_blocs.
All callers satisfy this.

Remove @nb_blocs and compute it from @size and @sector_len.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190308094610.21210-16-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-11 22:53:44 +01:00
Markus Armbruster
940d5b132f pflash: Clean up after commit 368a354f02, part 1
QOMification left parameter @qdev unused in pflash_cfi01_register()
and pflash_cfi02_register().  All callers pass NULL.  Remove.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190308094610.21210-15-armbru@redhat.com>
2019-03-11 22:53:44 +01:00
Markus Armbruster
81c7db723e hw: Use PFLASH_CFI0{1,2} and TYPE_PFLASH_CFI0{1,2}
We have two open-coded copies of macro PFLASH_CFI01().  Move the macro
to the header, so we can ditch the copies.  Move PFLASH_CFI02() to the
header for symmetry.

We define macros TYPE_PFLASH_CFI01 and TYPE_PFLASH_CFI02 for type name
strings, then mostly use the strings.  If the macros are worth
defining, they are worth using.  Replace the strings by the macros.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190308094610.21210-6-armbru@redhat.com>
2019-03-11 22:53:44 +01:00
Markus Armbruster
e7b6274197 pflash: Rename *CFI_PFLASH* to *PFLASH_CFI*
pflash_cfi01.c and pflash_cfi02.c start their identifiers with
pflash_cfi01_ and pflash_cfi02_ respectively, except for
CFI_PFLASH01(), TYPE_CFI_PFLASH01, CFI_PFLASH02(), TYPE_CFI_PFLASH02.
Rename for consistency.

Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190308094610.21210-5-armbru@redhat.com>
2019-03-11 22:53:44 +01:00
Markus Armbruster
4dbda935e0 pflash_cfi01: Log use of flawed "write to buffer"
Our implementation of "write to buffer" (command 0xE8) is flawed.
LOG_UNIMP its use, and add some FIXME comments.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190308094610.21210-4-armbru@redhat.com>
2019-03-11 22:53:44 +01:00
Markus Armbruster
2d93bebf81 pflash_cfi01: Do not exit() on guest aborting "write to buffer"
When a guest tries to abort "write to buffer" (command 0xE8), we print
"PFLASH: Possible BUG - Write block confirm", then exit(1).  Letting
the guest terminate QEMU is not a good idea.  Instead, LOG_UNIMP we
screwed up, then reset the device.

Macro PFLASH_BUG() is now unused; delete it.

Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190308094610.21210-3-armbru@redhat.com>
2019-03-11 22:53:44 +01:00
Markus Armbruster
1643406520 pflash: Rename pflash_t to PFlashCFI01, PFlashCFI02
flash.h's incomplete struct pflash_t is completed both in
pflash_cfi01.c and in pflash_cfi02.c.  The complete types are
incompatible.  This can hide type errors, such as passing a pflash_t
created with pflash_cfi02_register() to pflash_cfi01_get_memory().

Furthermore, POSIX reserves typedef names ending with _t.

Rename the two structs to PFlashCFI01 and PFlashCFI02.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190308094610.21210-2-armbru@redhat.com>
2019-03-11 22:53:44 +01:00
Peter Maydell
f5b4c31030 Pull request
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcgp4OAAoJEJykq7OBq3PIljoH+wcUSU/YDJhZeJv8Gm2VwY7W
 sRgwdDhD3TvAI8/Snk7wJFh3VWSh8C7p604pWEaK2WiLi7mbgrWtjylY6nX1GaQl
 60CKXO1LrXRfCAn7jyltJpVW9BXV5XvudTzcffaPmg+GJUaH5m1UaUqi6wA+0qNF
 LnGH7rZ0+WOf4nxPheHY+zevUCpqJx3rnHnM9bSALXR2D+5Or2PCC4qSov05YxDF
 KDpa38/tdse6rckXsx+j31U41oTTOPUf9TI7M6APQ08c5Bve1TMViw7aV1CfX3Eu
 YE3OZfJbRMRiFMEtjUrbUqwg5vKMndLW4ZMuuKOFlU5SpgcTt2NdTrhgsS6vn68=
 =59VW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Fri 08 Mar 2019 16:53:34 GMT
# gpg:                using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  iothread: document about why we need explicit aio_poll()
  iothread: push gcontext earlier in the thread_fn
  iothread: create main loop unconditionally
  iothread: create the gcontext unconditionally
  iothread: replace init_done_cond with a semaphore
  hw/block/virtio-blk: Clean req->dev repetitions
  MAINTAINERS: add missing support status fields

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-09 17:35:48 +00:00
Paolo Bonzini
dd0ff8191a isa: express SuperIO dependencies with Kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Yang Zhong
b42075bb77 virtio: express virtio dependencies with Kconfig
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-42-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
a7e2315907 isa: express dependencies with kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-36-yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
a02c0edb35 block: fix recursion in hw/block/dataplane
There are Xen files in hw/block/dataplane that should be compiled even if
virtio-blk is disabled.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
7c28b925b7 build: convert pci.mak to Kconfig
Instead of including the same list of devices for each target,
set CONFIG_PCI to true, and make the devices default to present
whenever PCI is available.  However, s390x does not want all the
PCI devices, so there is a separate symbol to enable them.

Done mostly with the following script:

  while read i; do
     i=${i%=y}; i=${i#CONFIG_}
     sed -i -e'/^config '$i'$/!b' -en \
            -e'a\' -e'    default y if PCI_DEVICES\' -e'    depends on PCI' \
          `grep -lw $i hw/*/Kconfig`
  done < default-configs/pci.mak

followed by replacing a few "depends on" clauses with "select"
whenever the symbol is not really related to PCI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-31-yang.zhong@intel.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
e0e312f352 build: switch to Kconfig
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig.  One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script.  This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini
82f5181777 kconfig: introduce kconfig files
The Kconfig files were generated mostly with this script:

  for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
    set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
    shift
    if test $# = 1; then
      cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
    bool

EOF
      git add $(dirname $1)/Kconfig
    else
      echo $i $*
    fi
  done
  sed -i '$d' hw/*/Kconfig
  for i in hw/*; do
    if test -d $i && ! test -f $i/Kconfig; then
      touch $i/Kconfig
      git add $i/Kconfig
    fi
  done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Anastasiia Rusakova
bf4069fbd7 hw/block/virtio-blk: Clean req->dev repetitions
Some functions sometimes uses req->dev even though a local variable
VirtIOBlock* s = req->dev has already been defined.
Updated places to use s everywhere in the file.

Signed-off-by: Anastasiia Rusakova <arusakova917@gmail.com>
Message-id: 20190307161925.4158-1-rusakova.nastasia@icloud.com
Message-Id: <20190307161925.4158-1-rusakova.nastasia@icloud.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-07 17:38:57 +00:00
Stephen Checkoway
d80cf1eb2e block/pflash_cfi02: Fix memory leak and potential use-after-free
Don't dynamically allocate the pflash's timer. But do use timer_del in
an unrealize function to make sure that the timer can't fire after the
pflash_t has been freed.

Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190219153727.62279-1-stephen.checkoway@oberlin.edu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06 10:37:23 +01:00
Paul Durrant
156ac94463 xen-block: stop leaking memory in xen_block_drive_create()
The locally allocated QDict-s need to be freed. ('file_layer' will be
freed implicitly since it is added as an object to 'driver_layer').

Spotted by Coverity: CID 1398649

While in the neighbourhood free 'driver' and 'filename' as soon as they are
added to the QDicts. Freeing after the 'done' label doesn't make that much
sense as, if the error path jumps to that label, the values would be NULL
anyway.

This patch also makes that more obvious by taking the error path if
'params' is NULL and then asserting that both driver and filename are
non-NULL in the normal path.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190219163440.15702-1-paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-02-28 17:21:12 +00:00
Paul Durrant
2ae23f0ecf xen-block: report error condition from vbd_name_to_disk()
The function needs to make sure it is passed a valid disk name. This is
easily done by making sure that the parsing loop results in a non-zero
value.

Spotted by Coverity: CID 1398640

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190215162533.19475-4-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-02-28 17:21:12 +00:00
Paul Durrant
210b977637 xen-block: remove redundant assignment
The assignment to 'p' is unnecessary as the code will either goto 'invalid'
or p will get overwritten.

Spotted by Coverity: CID 1398638

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190215162533.19475-3-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-02-28 17:21:12 +00:00
Paul Durrant
e02d94941d dataplane/xen-block: remove dead code
The if() statement is clearly bogus (dead code which should have been
cleaned up when grant mapping was removed).

Spotted by Coverity: CID 1398635

While in the neighbourhood, add a missing 'fall through' annotation.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190215162533.19475-2-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-02-28 17:21:12 +00:00
Peter Maydell
adf2e451f3 Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
 - bdrv_set_aio_context() related fixes
 - HMP snapshot commands: Use only tag, not the ID to identify snapshots
 - qmeu-img, commit: Error path fixes
 - block/nvme: Build fix for gcc 9
 - MAINTAINERS updates
 - Fix various issues with bdrv_refresh_filename()
 - Fix various iotests
 - Include LUKS overhead in qemu-img measure for qcow2
 - A fix for vmdk's image creation interface
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcc/knAAoJEH8JsnLIjy/WptQP/3F8Lh52H4egXaP7NUUuDjQM
 AhqhuDAp/EZBS+xim9kLTogNJADe/rMWdSX/YB5aLpSPYbjasC66NgaLhd6QewgQ
 VIcsLUdlYAyZ5ZjJytimfMTLwm1X02RmVIe55y52DTY8LlfViZzOlf3qwqPm00ao
 EJB2cl8UJLM+PVEu59cCw3R0/06LY+WIJRB32d3tnCBRTkaJwfR9h4lrp/juVcFZ
 U+2eWU68KMbUHSYiWANowN+KRV3uPY4HVA98v3F0vDmcBxlVHOeBg6S+PcT7tK8p
 huzCMwcdwUyPMJgVs/+WBtUnbG0jN6SHUYmFLz859UMVgBnCw5tzBMf8qw1wOA4A
 Iw+zor27Pxj4IlxcLPp5f97YZ8k9acdMR2VKPH6xLJZ1JF+sKa54RfzESd5EJeIj
 Mfcp773H0lIaWcFJ6RY1F0L1E1ta7QigwNBiWMdYfh0a0EWHnDvGyYeaSPYEQ+rl
 e8bZOcfrYwVI7DTDiZOIkGA9D8DXEPDNp+sl6s1DxeY69D0NNaXTtCPqFNNAbFbd
 20uD7yDRZlWq32cQB/K9D5cSkZRSOzdUpLfLU3nQU2+dz11x6OpM6m7DVboSrztD
 1HtPPDzDEvH5dOP7ibd60s+ntjkSiNfNkUgnuVrBE/d/PocC1eHHpZt5V7f43Ofb
 RxVwH5+smzQ9nsNBfQR0
 =gaah
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface

# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (71 commits)
  iotests: Skip 211 on insufficient memory
  vmdk: false positive of compat6 with hwversion not set
  iotests: add LUKS payload overhead to 178 qemu-img measure test
  qcow2: include LUKS payload overhead in qemu-img measure
  iotests.py: s/_/-/g on keys in qmp_log()
  iotests: Let 045 be run concurrently
  iotests: Filter SSH paths
  iotests.py: Filter filename in any string value
  iotests.py: Add is_str()
  iotests: Fix 207 to use QMP filters for qmp_log
  iotests: Fix 232 for LUKS
  iotests: Remove superfluous rm from 232
  iotests: Fix 237 for Python 2.x
  iotests: Re-add filename filters
  iotests: Test json:{} filenames of internal BDSs
  block: BDS options may lack the "driver" option
  block/null: Generate filename even with latency-ns
  block/curl: Implement bdrv_refresh_filename()
  block/curl: Harmonize option defaults
  block/nvme: Fix bdrv_refresh_filename()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-26 19:04:47 +00:00
Kevin Wolf
680f200217 virtio-blk: Increase in_flight for request restart BH
virtio_blk_dma_restart_bh() submits new requests, so in order to make
sure that these requests are not started inside a drained section of the
attached BlockBackend, we need to make sure that draining the
BlockBackend waits for the BH to be executed.

This BH is still questionable because its scheduled in the main thread
instead of the configured iothread. Leave a FIXME comment for this.

But with this fix, enabling the data plane at least waits for these
requests (in bdrv_set_aio_context()) instead of changing the AioContext
under their feet and making them run in the wrong thread, causing
crashes and failures (e.g. due to missing locking).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-25 15:03:19 +01:00
Stefano Garzarella
37b06f8d46 virtio-blk: add DISCARD and WRITE_ZEROES features
This patch adds the support of DISCARD and WRITE_ZEROES commands,
that have been introduced in the virtio-blk protocol to have
better performance when using SSD backend.

We support only one segment per request since multiple segments
are not widely used and there are no userspace APIs that allow
applications to submit multiple segments in a single call.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-7-sgarzare@redhat.com
Message-Id: <20190221103314.58500-7-sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22 09:42:17 +00:00
Stefano Garzarella
20764be042 virtio-blk: set config size depending on the features enabled
Starting from DISABLE and WRITE_ZEROES features, we use an array of
VirtIOFeature (as virtio-net) to properly set the config size
depending on the features enabled.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-6-sgarzare@redhat.com
Message-Id: <20190221103314.58500-6-sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22 09:42:17 +00:00
Stefano Garzarella
5c81161f80 virtio-blk: add "discard" and "write-zeroes" properties
In order to avoid migration issues, we enable DISCARD and
WRITE_ZEROES features only for machine type >= 4.0

As discussed with Michael S. Tsirkin and Stefan Hajnoczi on the
list [1], DISCARD operation should not have security implications
(eg. page cache attacks), so we can enable it by default.

[1] https://lists.gnu.org/archive/html/qemu-devel/2019-02/msg00504.html

Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-4-sgarzare@redhat.com
Message-Id: <20190221103314.58500-4-sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22 09:42:16 +00:00
Stefano Garzarella
bbe8bd4d85 virtio-blk: add host_features field in VirtIOBlock
Since configurable features for virtio-blk are growing, this patch
adds host_features field in the struct VirtIOBlock. (as in virtio-net)
In this way, we can avoid to add new fields for new properties and
we can directly set VIRTIO_BLK_F* flags in the host_features.

We update "config-wce" and "scsi" property definition to use the new
host_features field without change the behaviour.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-3-sgarzare@redhat.com
Message-Id: <20190221103314.58500-3-sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22 09:42:16 +00:00
Stefano Garzarella
00f639fb8f virtio-blk: add acct_failed param to virtio_blk_handle_rw_error()
We add acct_failed param in order to use virtio_blk_handle_rw_error()
also when is not required to call block_acct_failed(). (eg. a discard
operation is failed)

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20190221103314.58500-2-sgarzare@redhat.com
Message-Id: <20190221103314.58500-2-sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-22 09:42:16 +00:00
Changpeng Liu
42824b4d16 virtio-blk: set correct config size for the host driver
Commit caa1ee43 "vhost-user-blk: add discard/write zeroes features
support" added fields to struct virtio_blk_config. This changes
the size of the config space and breaks migration from QEMU 3.1
and older:

qemu-system-ppc64: get_pci_config_device: Bad config data: i=0x10 read: 41 device: 1 cmask: ff wmask: 80 w1cmask:0
qemu-system-ppc64: Failed to load PCIDevice:config
qemu-system-ppc64: Failed to load virtio-blk:virtio
qemu-system-ppc64: error while loading state for instance 0x0 of device 'pci@800000020000000:01.0/virtio-blk'
qemu-system-ppc64: load of migration failed: Invalid argument

Since virtio-blk doesn't support the "discard" and "write zeroes"
features, it shouldn't even expose the associated fields in the
config space actually. Just include all fields up to num_queues to
match QEMU 3.1 and older.

Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1550022537-27565-1-git-send-email-changpeng.liu@intel.com
Message-Id: <1550022537-27565-1-git-send-email-changpeng.liu@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-13 16:18:17 +08:00
Stefano Garzarella
9a6719d572 virtio-blk: cleanup using VirtIOBlock *s and VirtIODevice *vdev
In several part we still using req->dev or VIRTIO_DEVICE(req->dev)
when we have already defined s and vdev pointers:
    VirtIOBlock *s = req->dev;
    VirtIODevice *vdev = VIRTIO_DEVICE(s);

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 20190208142347.214815-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-12 11:49:17 +08:00
Peter Maydell
68df0c30ed pci, pc, virtio: fixes, cleanups, features
vhost user blk discard/write zeroes features
 misc cleanups and fixes all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcWbMUAAoJECgfDbjSjVRp2acH+wa8abfyQIpVMji+cdvcw7Wo
 yJjCoPxX0y+tm7FGp6YjyyQhSzjUYRS+71NL6xkZVxs8yh4ZCbb/xDRYmrVG2cb6
 6tUcqp1zlMp+w+kVKS4m4WTb0Z1bIODOi99tNBXxYjWY9lXF/hjZbhRpt6vL/NaP
 hqYtp+wlhyjxsY/GFn5XZLY7F6+QKq/lsMJD80FvbtHBh/ngqmgyoouNwYzg1faW
 M3wD5A3IOXLzU+MGK6uCtKK0+t3xzvaVJL7zChimKkn+y+Pg9T+s04zQS739bJRg
 dYYrVK3IOt2tvVxBZnnUm9eBIxxElAxRssmERPe2i0mBRSXYKomuVZrXJ6ROhjA=
 =TxWc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, cleanups, features

vhost user blk discard/write zeroes features
misc cleanups and fixes all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 05 Feb 2019 16:00:20 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  contrib/libvhost-user: cleanup casts
  r2d: fix build on mingw
  mmap-alloc: fix hugetlbfs misaligned length in ppc64
  mmap-alloc: unfold qemu_ram_mmap()
  i386, acpi: cleanup build_facs by removing second unused argument
  fw_cfg: fix the life cycle and the name of "qemu_extra_params_fw"
  acpi: Make TPM 2.0 with TIS available as MSFT0101
  hw/virtio: Use CONFIG_VIRTIO_PCI switch instead of CONFIG_PCI
  vhost-user-blk: add discard/write zeroes features support
  contrib/vhost-user-blk: fix the compilation issue
  pci/msi: export msi_is_masked()
  intel_iommu: reset intr_enabled when system reset
  intel_iommu: fix operator in vtd_switch_address_space
  hw: virtio-pci: drop DO_UPCAST
  include: update Linux headers to 4.21-rc1/5.0-rc1
  scripts/update-linux-headers.sh: adjust for Linux 4.21-rc1 (or 5.0-rc1)
  contrib/libvhost-user: switch to uint64_t
  virtio: add checks for the size of the indirect table

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-05 16:52:19 +00:00
Changpeng Liu
caa1ee4313 vhost-user-blk: add discard/write zeroes features support
Linux commit 1f23816b8 "virtio_blk: add discard and write zeroes support"
added the support in the Guest kernel, while here also enable the features
support with vhost-user-blk driver. Also enable the test example utility
with DISCARD and WRITE ZEROES commands.

Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-05 10:58:33 -05:00
Paul Durrant
3149f183d7 xen-block: handle resize callback
Some frontend drivers will handle dynamic resizing of PV disks, so set up
the BlockDevOps resize_cb() method during xen_block_realize() to allow
this to be done.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-02-04 11:04:49 +00:00
Peter Maydell
cfe6c54769 Block patches:
- New debugging QMP command to explore block graphs
 - Converted DPRINTF()s to trace events
 - Fixed qemu-io's use of getopt() for systems with optreset
 - Minor NVMe emulation fixes
 - An iotest fix
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcUkaiAAoJEPQH2wBh1c9AHsEIAIU0+FNjtdz7lNgyeBCSFCFa
 /qWNk4+w6QBfhTTx/N0hGwh5/FvNYQhby8VHtZitE4/QcLbJwHYgWf14pwce3tP3
 3qNB87AdQpKMpbajQM2x2Xy8lnlPeM7fe21Q/12vuX7AlEDT3gH+W9rg94bw2oFN
 r+xBk6H5F2aVElw3CwMM7eary4+dPnnCQwAnoqM+g5hdpL+0scrIyARGw7v0hmSn
 LDWESCM4a55lEYmwj1wS3J3uj6Fj00yzBvcEuCcT1GO+lXlV8/ciO9r2HqxVKwgz
 4GAi/BERoMKjfn+/77/yI5flprPx2voNGgkyBY4C3z9ncnN6u02QBZSusBIWpSg=
 =Kt4r
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2019-01-31' into staging

Block patches:
- New debugging QMP command to explore block graphs
- Converted DPRINTF()s to trace events
- Fixed qemu-io's use of getopt() for systems with optreset
- Minor NVMe emulation fixes
- An iotest fix

# gpg: Signature made Thu 31 Jan 2019 00:51:46 GMT
# gpg:                using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1  1829 F407 DB00 61D5 CF40

* remotes/xanclic/tags/pull-block-2019-01-31:
  iotests: Allow 147 to be run concurrently
  iotests: Bind qemu-nbd to localhost in 147
  iotests.py: Add qemu_nbd_pipe()
  nvme: use pci_dev directly in nvme_realize
  nvme: ensure the num_queues is not zero
  nvme: use TYPE_NVME instead of constant string
  qemu-io: Add generic function for reinitializing optind.
  block/sheepdog: Convert from DPRINTF() macro to trace events
  block/file-posix: Convert from DPRINTF() macro to trace events
  block/curl: Convert from DPRINTF() macro to trace events
  block/ssh: Convert from DPRINTF() macro to trace events
  scripts: add render_block_graph function for QEMUMachine
  qapi: add x-debug-query-block-graph

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-31 19:26:09 +00:00
Li Qiang
a3d25ddd6f nvme: use pci_dev directly in nvme_realize
There is no need to make another reference.

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190120055558.32984-4-liq3ea@163.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-31 00:38:19 +01:00
Li Qiang
2410e133ec nvme: ensure the num_queues is not zero
When it is zero, it causes segv.
Using following command:

"-drive file=//home/test/test1.img,if=none,id=id0
-device nvme,drive=id0,serial=test,num_queues=0"
causes following Backtrack:

Thread 4 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffe9735700 (LWP 30952)]
0x0000555555a7a77c in nvme_start_ctrl (n=0x5555577473f0) at hw/block/nvme.c:825
825	    if (unlikely(n->cq[0])) {
(gdb) bt
0  0x0000555555a7a77c in nvme_start_ctrl (n=0x5555577473f0)
    at hw/block/nvme.c:825
1  0x0000555555a7af7f in nvme_write_bar (n=0x5555577473f0, offset=20,
    data=4587521, size=4) at hw/block/nvme.c:969
2  0x0000555555a7b81a in nvme_mmio_write (opaque=0x5555577473f0, addr=20,
    data=4587521, size=4) at hw/block/nvme.c:1163
3  0x0000555555869236 in memory_region_write_accessor (mr=0x555557747cd0,
    addr=20, value=0x7fffe97320f8, size=4, shift=0, mask=4294967295, attrs=...)
    at /home/test/qemu1/qemu/memory.c:502
4  0x0000555555869446 in access_with_adjusted_size (addr=20,
    value=0x7fffe97320f8, size=4, access_size_min=2, access_size_max=8,
    access_fn=0x55555586914d <memory_region_write_accessor>,
    mr=0x555557747cd0, attrs=...) at /home/test/qemu1/qemu/memory.c:568
5  0x000055555586c479 in memory_region_dispatch_write (mr=0x555557747cd0,
    addr=20, data=4587521, size=4, attrs=...)
    at /home/test/qemu1/qemu/memory.c:1499
6  0x00005555558030af in flatview_write_continue (fv=0x7fffe0061130,
    addr=4273930260, attrs=..., buf=0x7ffff7ff0028 "\001", len=4, addr1=20,
    l=4, mr=0x555557747cd0) at /home/test/qemu1/qemu/exec.c:3234
7  0x00005555558031f9 in flatview_write (fv=0x7fffe0061130, addr=4273930260,
    attrs=..., buf=0x7ffff7ff0028 "\001", len=4)
    at /home/test/qemu1/qemu/exec.c:3273
8  0x00005555558034ff in address_space_write (
---Type <return> to continue, or q <return> to quit---
    as=0x555556758480 <address_space_memory>, addr=4273930260, attrs=...,
    buf=0x7ffff7ff0028 "\001", len=4) at /home/test/qemu1/qemu/exec.c:3363
9  0x0000555555803550 in address_space_rw (
    as=0x555556758480 <address_space_memory>, addr=4273930260, attrs=...,
    buf=0x7ffff7ff0028 "\001", len=4, is_write=true)
    at /home/test/qemu1/qemu/exec.c:3374
10 0x00005555558884a1 in kvm_cpu_exec (cpu=0x555556920e40)
    at /home/test/qemu1/qemu/accel/kvm/kvm-all.c:2031
11 0x000055555584cd9d in qemu_kvm_cpu_thread_fn (arg=0x555556920e40)
    at /home/test/qemu1/qemu/cpus.c:1281
12 0x0000555555dbaf6d in qemu_thread_start (args=0x5555569438a0)
    at util/qemu-thread-posix.c:502
13 0x00007ffff5dc86db in start_thread (arg=0x7fffe9735700)
    at pthread_create.c:463
14 0x00007ffff5af188f in clone ()
    at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95

Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190120055558.32984-3-liq3ea@163.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-31 00:38:19 +01:00
Li Qiang
08db59e188 nvme: use TYPE_NVME instead of constant string
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190120055558.32984-2-liq3ea@163.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-31 00:38:19 +01:00
Stefano Garzarella
95b3c9cfd5 virtio-blk: remove duplicate definition of VirtIOBlock *s pointer
VirtIOBlock *s is already defined and initialized with req->dev
on top of virtio_blk_handle_request(), so we can remove it from
the code block of VIRTIO_BLK_T_GET_ID case.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190130095231.42081-1-sgarzare@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-30 14:20:18 +01:00