./configure --help
make
will try to re-run configure with --help
which isn't what was intended.
The reason is that config.status was written
even on configure error.
Defer writing config.status until configure
has completed successfully.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Instead of
spice support no (/)
configure now prints
spice support no
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MacOSX doesn't pull .o files from .a archives if the symbol that it
requires is one which the .o file defines as a common symbol.
(Common symbols are those declared without "extern"; the linker
will merge together common symbols with the same name, so
redeclaring the same variable in two compilation units results in
them referring to the same symbol rather than a compilation error).
This MacOSX difference from traditional linker behaviour means that
"make check" produces link errors:
Undefined symbols for architecture x86_64:
"_cur_mon", referenced from:
_error_vprintf in libqemuutil.a(qemu-error.o)
_error_printf in libqemuutil.a(qemu-error.o)
_error_printf_unless_qmp in libqemuutil.a(qemu-error.o)
_error_print_loc in libqemuutil.a(qemu-error.o)
_error_report in libqemuutil.a(qemu-error.o)
ld: symbol(s) not found for architecture x86_64
in this case because "cur_mon" is a common symbol in
libqemustub.a(mon-set-error.o).
In QEMU we don't make any use at all of the common symbol
functionality, so we can avoid this problem entirely simply
by compiling with -fno-common. Enable this option for all
builds, not just MacOSX, so that if we ever inadvertently
introduce multiple definitions of some variable that will
be immediately spotted as a build error rather than only
breaking the MacOSX build.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1393451610-24617-1-git-send-email-peter.maydell@linaro.org
gcc's C++ compiler complains about being passed some -W options
which make sense for C but not for C++. This means we mustn't try
a C++ compile with QEMU_CFLAGS, but only with a filtered version
that removes the offending options. This filtering was already being
done for uses of C++ in the build itself, but was omitted for the
"does C++ work?" configure test. This only showed up when doing
builds which explicitly enabled -Werror with --enable-werror,
because the "do the compilers work" tests were mistakenly placed
above the "default werror based on whether compiling from git" code.
Another error in this category is that clang warns if you ask it to
compile C++ code from a file named "foo.c". Further, because we
were running do_cc in a subshell in the condition part of an "if",
the error_exit inside do_compiler wouldn't terminate configure and
we would plunge on regardless. Fix this complex of errors:
1. Move the default-werror code up so that there are no invocations
of compile_object and friends between it and the point where we
set $werror explicitly based on the --enable-werror command line
option.
2. Provide a mechanism for filtering QEMU_CFLAGS to create
QEMU_CXXFLAGS, and use it for the test we run here.
3. Provide a do_cxx function to run a test with the C++ compiler
rather than doing cute tricks with subshells and do_cc.
4. Use a new temporary file TMPCXX for the C++ program fragment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org
Tested-by: Andreas Färber <afaerber@suse.de>
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
kdump-compressed format supports three compression format, zlib/lzo/snappy.
Currently, only zlib is available. This patch is used to support lzo/snappy.
'--enable-lzo/--enable-snappy' is needed to be specified with configure to make
lzo/snappy available for qemu
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* fixes for various Coverity-spotted bugs
* support new KVM device control API for VGIC
* support KVM VGIC save/restore/migration
* more AArch64 system mode foundations
* support ARMv8 CRC instructions for A32/T32
* PL330 minor fixes and cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=1X50
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140226' into staging
target-arm queue:
* fixes for various Coverity-spotted bugs
* support new KVM device control API for VGIC
* support KVM VGIC save/restore/migration
* more AArch64 system mode foundations
* support ARMv8 CRC instructions for A32/T32
* PL330 minor fixes and cleanup
# gpg: Signature made Wed 26 Feb 2014 17:51:32 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140226: (45 commits)
dma/pl330: implement dmaadnh instruction
dma/pl330: Fix buffer depth
dma/pl330: Add event debugging printfs
dma/pl330: Rename parent_obj
dma/pl330: printf format type sweep.
dma/pl330: Fix misleading type
dma/pl330: Delete overly verbose debug printf
target-arm: Add support for AArch32 ARMv8 CRC32 instructions
include/qemu/crc32c.h: Rename include guards to match filename
target-arm: Add utility function for checking AA32/64 state of an EL
target-arm: Implement AArch64 view of CPACR
target-arm: A64: Implement MSR (immediate) instructions
target-arm: Store AIF bits in env->pstate for AArch32
target-arm: A64: Implement WFI
target-arm: Get MMU index information correct for A64 code
target-arm: Implement AArch64 OSLAR_EL1 sysreg as WI
target-arm: Implement AArch64 dummy breakpoint and watchpoint registers
target-arm: Implement AArch64 ID and feature registers
target-arm: Implement AArch64 generic timers
target-arm: Implement AArch64 MPIDR
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTDJtxAAoJEJykq7OBq3PIEBAH/0Fh1TUsHpLGwtVC+HObl4HF
19KJpaXfG3L1x5pV4qbRvsmgXDNjnm8sSAbAvINn5uKJqk371qshvgssaIyLOA/o
VD+9lR1mwE9mwiktCfFniddoZmTsMyGxsbE4i1dZAxsGuuiJ3x2zRotpQCLjmWMJ
OSIdy1v657tR0EnhjI19g4fNvCpfOwX3tvMt20vgL6/x9AuNjMfFeP6S/KNuxBBC
6vflVNmN0AIc/tIbR5bql5/wcDixJcxobFXHxAmIbaaJTNtFXq0PNpo0kfLi5Zzx
s6iVoYVXNMx1xqpegBEVLyIvtcX7SCggO8FT+bhzaOfPVL8NaSXRJMRjH22V+D0=
=UA+s
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
Net patches
# gpg: Signature made Tue 25 Feb 2014 13:32:33 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/net-pull-request:
virtio-net: use qemu_get_queue() where possible
vhost_net: use offload API instead of bypassing it
net: remove implicit peer from offload API
net: Disable netmap backend when not supported
net: add offloading support to netmap backend
net: make tap offloading callbacks static
net: virtio-net and vmxnet3 use offloading API
net: TAP uses NetClientInfo offloading callbacks
net: extend NetClientInfo for offloading
net: change vnet-hdr TAP prototypes
opencores_eth: flush queue whenever can_receive can go from false to true
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for AArch32 CRC32 and CRC32C instructions added in ARMv8
and add a CPU feature flag to enable these instructions.
The CRC32-C implementation used is the built-in qemu implementation
and The CRC-32 implementation is from zlib. This requires adding zlib
to LIBS to ensure it is linked for the linux-user binary.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1393411566-24104-3-git-send-email-will.newton@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gmodule-2.0's pkg-config files include -Wl,--export-dynamic, which breaks
static builds. It is a glib bug, but we need to support --static builds for
the linux-user targets, and in the end all that is needed to fix this is:
* outlaw --enable-modules --static, which makes little sense anyway
* only include gmodule-2.0's cflags and ldflags if --enable-modules is
specified on the command line.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1393346215-5636-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch fixes configure so that the netmap backend is not compiled in if the
host doesn't support an API version >= 11. A version upper bound (15) has been
added so that the netmap API can be extended with some minor features without
requiring QEMU code modifications.
Moreover, some changes have been done to net/netmap.c in order to reflect the
current netmap API/ABI (11).
The NETMAP_WITH_LIBS macro makes possible to include some utilities (e.g.
netmap ring macros, D(), RD() and other high level functions) through the netmap
headers. In this way we get rid of the D and RD macro definitions in the QEMU
code, and we open the way for further code simplifications that will be
introduced by future patches.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZaDG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check that the C++ compiler works with the C compiler; if it
does not, then don't pass CXX to the build process. This
fixes a regression where QEMU was no longer building if the
build environment didn't have a C++ compiler (introduced
in commit 3144f78b, which incorrectly assumed that rules.mak
would only see a non-empty $(CXX) if configure had actually
found a working C++ compiler).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1392909016-14028-1-git-send-email-peter.maydell@linaro.org
This patchset enables the core of the quorum mechanism.
The num_children reads are compared to get the majority version and if this
version exists more than threshold times the guest won't see the error at all.
If a block is corrupted or if an error occurs during an IO or if the quorum
cannot be established QMP events are used to report to the management.
Use gnutls's SHA-256 to compare versions.
--enable-quorum must be used to enable the feature.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTBNDcAAoJEJykq7OBq3PISEMIAIrJN9RTfpeAaUY4bSj9Q283
ReAgkTbe1yhuvik8E3sN9OOm24EfD9o2mE3Io2Jq1tslgM0yDXcuBoIT6rrmwF3L
MLRtE89JIStv1JbNyeorTgS8N/6kY0evKkmG8kskwHS3QVCKo3+OsPz7D6JNQrdA
KQNJZa19DVIfdgBGCD1HuGOVgCIe3rrGOc16/XvPuK3CXACyvfEO7B/1YStSXBu5
QmtccRMzCo7Xt6PwAvq4RclNa45lnjVvv0lcyApdajn/zFGBzXmK19NrMhDDHQC+
fLS3fmWQCo3dFeVwoyfUhamt3wxD3Mpp5PYEytJ5EOmv+UPuCQ1/8SQJjxxKESo=
=sVTF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Tracing pull request
# gpg: Signature made Wed 19 Feb 2014 15:42:20 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace-events: Fix typo in "offset"
Add ust generated files to .gitignore
Update documentation for LTTng ust tracing
Adapt Makefiles to the new LTTng ust interface
Modified the tracetool framework for LTTng 2.x
Fix configure script for LTTng 2.x
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Win32 doesn't have a cpuid.h, and MacOSX may have one but without
the __cpuid() function we use, which means that commit 9d2eec20
broke the build for those platforms. Fix this by tightening up
our configure cpuid.h check to test that the functions we need
are present, and adding some missing #ifdef guards in
tcg/i386/tcg-target.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Adjust TMPO and added TMPB, TMPL, and TMPA. libtool needs the names
to be fixed (TMPB).
Add new functions do_libtool and libtool_prog.
Add check for broken gcc and libtool.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds loading, stamp checking and initialization of modules.
The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:
qemu_stamp_$RELEASEHASH
where $RELEASEHASH is generated by hashing version strings and content
of configure script.
With this, modules built from a different tree/version/configure will
not be loaded.
The module loading code requires gmodule-2.0.
Modules are searched under
- CONFIG_MODDIR
- executable folder (to allow running qemu-{img,io} in the build
directory)
- ../ of executable folder (to allow running system emulator in the
build directory)
Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
$(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add necessary rules and flags for shared object generation.
The new rules introduced here are:
1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.
2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern
matching in Makefile. It's linked to "-shared" with all its dependencies
(multiple *.o) as input. Which means the list of depended objects must
be specified in each sub-Makefile.objs:
foo.mo-objs := bar.o baz.o qux.o
in the same style with foo.o-cflags and foo.o-libs. The objects here
will be prefixed with "$(obj)/" if it's a subdirectory Makefile.objs.
3) For all files ending up in %.so, the following is added automatically:
foo.o-cflags += -fPIC -DBUILD_DSO
Also introduce --enable-modules in configure, the option will enable
support of shared object build. Otherwise objects are static linked to
executables.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While -mdynamic-no-pic can speed up the code somewhat, it is only used
on the legacy PowerPC Mac OS X, and I am not sure if anyone is still
testing that. Disabling PIC can cause problems when enabling modules,
so do not do that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No longer adds flags and libs for them to global variables, instead
create config-host.mak variables like FOO_CFLAGS and FOO_LIBS, which is
used as per object cflags and libs.
This removes unwanted dependencies from libcacard.
Signed-off-by: Fam Zheng <famz@redhat.com>
[Split from Fam's patch to enable modules. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makefile.target includes rule.mak and unnested common-obj-y, then prefix
them with '../', this will ignore object specific QEMU_CFLAGS in subdir
Makefile.objs:
$(obj)/curl.o: QEMU_CFLAGS += $(CURL_CFLAGS)
Because $(obj) here is './block', instead of '../block'. This doesn't
hurt compiling because we basically build all .o from top Makefile,
before entering Makefile.target, but it will affact arriving per-object
libs support.
The starting point of $(obj) is passed in as argument of unnest-vars, as
well as nested variables, so that different Makefiles can pass in a
right value.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This resolves the build issue with building the ROMs on OpenBSD on x86 archs.
As of OpenBSD 5.3 the compiler builds PIE binaries by default and thus the
whole OS/packages and so forth. The ROMs need to have PIE disabled.
Check in configure whether the compiler supports the flags for disabling
PIE, and if it does then use them for building the ROMs. This fixes the
following buildbot failure:
>From the OpenBSD buildbots..
Building optionrom/multiboot.img
ld: multiboot.o: relocation R_X86_64_16 can not be used when making a shared object; recompile with -fPIC
Signed-off by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Modify feature_not_found to accept an optional second parameter to be
printed after the generic feature not found error.
Modify most calls to feature_not_found to provide hints as to the
packages that may be missing. The few calls remaining without a remedy
are ones I couldn't work out how to remedy myself.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most distros package it as libfdt, and mentioning libfdt here makes it
much easier to find the package you're missing.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XErB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-anthony' into staging
Block patches
# gpg: Signature made Sun 09 Feb 2014 08:12:51 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-anthony:
block: Fix 32 bit truncation in mark_request_serialising()
blkdebug: Don't leak bs->file on failure
block: Don't call ROUND_UP with negative values
block: bdrv_aligned_pwritev: Assert overlap range
block: Fix memory leaks in bdrv_co_do_pwritev()
raw: Fix BlockLimits passthrough
qemu-iotests: add test for qcow2 preallocation with different cluster sizes
qcow2: check for NULL l2meta
qcow2: fix offset overflow in qcow2_alloc_clusters_at()
qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset()
block/iscsi: always fill bs->bl.opt_transfer_length
block: Fail gracefully with missing filename
qemu-iotests: enable support for NFS protocol
qemu-iotests: enable test 016 and 025 to work with NFS protocol
qemu-iotests: blacklist test 020 for NFS protocol
qemu-iotests: change _supported_proto to file for various tests
block: add native support for NFS
qemu-iotest: Make 077 raw-only
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds native support for accessing images on NFS
shares without the requirement to actually mount the entire
NFS share on the host.
NFS Images can simply be specified by an url of the form:
nfs://<host>/<export>/<filename>[?param=value[¶m2=value2[&...]]]
For example:
qemu-img create -f qcow2 nfs://10.0.0.1/qemu-images/test.qcow2
You need LibNFS from Ronnie Sahlberg available at:
git://github.com/sahlberg/libnfs.git
for this to work.
During configure it is automatically probed for libnfs and support
is enabled on-the-fly. You can forbid or enforce libnfs support
with --disable-libnfs or --enable-libnfs respectively.
Due to NFS restrictions you might need to execute your binaries
as root, allow them to open priviledged ports (<1024) or specify
insecure option on the NFS server.
For additional information on ROOT vs. non-ROOT operation and URL
format + parameters see:
https://raw.github.com/sahlberg/libnfs/master/README
Supported by qemu are the uid, gid and tcp-syncnt URL parameters.
LibNFS currently support NFS version 3 only.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM:
* added support for target disassembly
* switched to custom QEMUDisassembler so the output format
matches what QEMU expects
* make sure we correctly fall back to "just print hex"
if we didn't build the AArch64 disassembler because of
lack of a C++ compiler
* rename from 'aarch64' to 'arm-a64' because this is a
disassembler for the A64 instruction set
* merge aarch64.c and aarch64-cxx.cc into one C++ file
* simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ensure configure will set-up links for the files
if the build is created in other directory.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support .bdrv_co_write_zeroes() from gluster driver by using GlusterFS API
glfs_zerofill() that off-loads the writing of zeroes to GlusterFS server.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* stefanha/block:
commit: Remove unused check
qemu-iotests: Update test cases for commit active
commit: Support commit active layer
block: Add commit_active_start()
mirror: Move base to MirrorBlockJob
mirror: Don't close target
qemu-iotests: drop duplicate virtio-blk initialization failure
vmdk: Allow vmdk_create to work with protocol
vmdk: Check VMFS extent line field number
docs: updated qemu-img man page and qemu-doc to reflect VHDX support.
block: vhdx - improve error message, and .bdrv_check implementation
block/iscsi: Fix compilation for libiscsi 1.4.0 (API change)
qapi-schema: fix QEMU 1.8 references
dataplane: replace hostmem with memory_region_find
dataplane: change vring API to use VirtQueueElement
vring: factor common code for error exits
vring: create a common function to parse descriptors
sheepdog: fix dynamic grow for running qcow2 format
Message-id: 1387554416-5837-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The help message uses $python and displays its value, so that macro
should be tested and set early.
With this modification, configure --help displays the correct value
(usually python -B) and no longer creates several *.pyc files.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In the new form most lines of the code now look like the final output:
there is no leading echo command and the lines are shorter.
The resulting output is nearly identical: the only difference is a blank
character which was deliberately removed:
@@ -8,7 +8,7 @@
--interp-prefix=PREFIX where to find shared libraries, etc.
use %M for cpu name [/usr/gnemul/qemu-%M]
--target-list=LIST set target list (default: build everything)
- Available targets: alpha-softmmu arm-softmmu
+ Available targets: alpha-softmmu arm-softmmu
cris-softmmu i386-softmmu lm32-softmmu m68k-softmmu
microblaze-softmmu microblazeel-softmmu mips-softmmu
mips64-softmmu mips64el-softmmu mipsel-softmmu
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Function iscsi_read10_task got additional parameters starting with version
libiscsi 1.5.0.
libiscsi 1.4.0 is still widely used (Debian wheezy, jessie and other Linux
distributions currently provide packages for QEMU which use it), so we
still need support for this older API.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Register the aarch64-fpu XML and implement the necessary
read/write handlers so we can support reading and writing
of FP registers in the gdb stub.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Enable KVM if the host and target CPU are both aarch64. Note
that host aarch64 + target arm is not valid for KVM acceleration:
the 64 bit kernel does not support the ioctl interface for
32 bit CPUs. 32 bit VMs on 64 bit hosts need to be created
using the 64 bit ioctl interface; when QEMU supports this it
will be on the arch64-softmmu target with a -cpu parameter for
a 32 bit CPU, which is still an aarch64/aarch64 combination
as far as configure is concerned.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
help: add id suboption to -iscsi
scsi-disk: fix WRITE SAME with large non-zero payload
block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
scsi-disk: fix VERIFY emulation
scsi-bus: fix transfer length and direction for VERIFY command
Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.
To compile QEMU with netmap support, use the following configure
options:
./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
http://info.iet.unipi.it/~luigi/netmap/
The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this converts read, write and flush functions from aio to coroutines
eliminating almost 200 lines of code.
The requirement for libiscsi is bumped to version 1.4.0 which was
released in may 2012.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.
There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.
I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSkzcXAAoJECgfDbjSjVRprVkIAJI0t8gfgichVVthsXPjCEI+
WlibVjN+BDt0S/y8sb5H43JAJS9JN6myi9rSNc2t2bdEynVJEDpGL9BZG/9RMjZ3
ekhyQsDVu8jzAseiFicBTtHt31RSjSyGsTAFks28FaB2p3DxYT6DY2enJ4CrtLR0
CCqMmvBWJY/hLjdiuYyuAKNrTSKkmdlddUWJyI5lWXJQbP6dx3cjF6OrUnCngBFG
TJ6Oh9lWC2IWf86P+73JtwpkTkm41shyMBz4MTAY0AvriKBzn27qTrP9BwL5rfaM
Tsaoc9Y81+4bd5EiDo3NpA2pAyCF9H+oeR1Zblce6p60wOKKfGvwT65KOH7fc1M=
=bdsX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc very last minute fixes for 1.7
This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.
There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.
I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 25 Nov 2013 03:40:07 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (5) and Bandan Das (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
configure: make --iasl option actually work
Revert "e1000/rtl8139: update HMP NIC when every bit is written"
acpi-build: fix build on glib < 2.14
acpi-build: fix build on glib < 2.22
pci: unregister vmstate_pcibus on unplug
s390x: fix flat file load on 32 bit systems
Message-id: 1385379990-32093-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
--iasl option was added to CC option parsing section by mistake,
it's not effective there and attempts to use cause
an 'unknown option' error.
Fix this up.
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.
Thanks to Paul Smith for analyzing this bug for us.
Cc: qemu-stable@nongnu.org
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Commit 1d984a67a9 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.
Now configure adds -B only if it is accepted by the Python interpreter.
This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Jeff Cody (26) and others
# Via Stefan Hajnoczi
* stefanha/block: (37 commits)
block: Round up total_sectors
block: vhdx qemu-iotest - log replay of data sector
block: qemu-iotests for vhdx, add write test support
block: vhdx - update _make_test_img() to filter out vhdx options
block: vhdx - add .bdrv_create() support
block: vhdx - fix comment typos in header, fix incorrect struct fields
block: vhdx - break out code operations to functions
block: vhdx - move more endian translations to vhdx-endian.c
block: vhdx - remove BAT file offset bit shifting
block: vhdx write support
block: vhdx - add log write support
block: vhdx - add region overlap detection for image files
block: vhdx - log parsing, replay, and flush support
block: vhdx code movement - move vhdx_close() above vhdx_open()
block: vhdx - update log guid in header, and first write tracker
block: vhdx - break endian translation functions out
block: vhdx - log support struct and defines
block: vhdx code movement - VHDXMetadataEntries and BDRVVHDXState to header.
block: vhdx - add header update capability.
block: vhdx - minor comments and typo correction.
...
Message-id: 1383905551-16411-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This adds the ability to update the headers in a VHDX image, including
generating a new MS-compatible GUID.
As VHDX depends on uuid.h, VHDX is now a configurable build option. If
VHDX support is enabled, that will also enable uuid as well. The
default is to have VHDX enabled.
To enable/disable VHDX: --enable-vhdx, --disable-vhdx
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The latest configure invocation was saved in config-host.mak and could
be extracted from that file to recreate the configuration.
Now it is saved in a new file config.status which can be directly executed
to recreate the configuration. The file name and the comments were copied
from GNU autoconf.
Makefile now uses config.status, but also includes transitional code
for the old mechanism.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
This avoids needing to execute a program and keeping an (incomplete)
list when cross-compiling.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-id: 1372649418-4987-1-git-send-email-vapier@gentoo.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
In some cases when building with parallelism (make -jN),
build fails because the directory where output files are
supposed to be does not exist. In particular, when make
decides to build virtfs-proxy-helper.1 before other files
in fsdev/, build will fail with the following error:
perl -Ww -- BUILDDIR/scripts/texi2pod.pl BUILDDIR/fsdev/virtfs-proxy-helper.texi fsdev/virtfs-proxy-helper.pod && pod2man --utf8 --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > fsdev/virtfs-proxy-helper.1
opening "fsdev/virtfs-proxy-helper.pod": No such file or directory
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Detect presence of IASL compiler and use it
to process ASL source. If not there, use pre-compiled
files in-tree. Add script to update the in-tree files.
Note: distros are known to silently update iasl
so detect correct iasl flags for the installed version on each run as
opposed to at configure time.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Richard Henderson (19) and Paolo Bonzini (2)
# Via Richard Henderson
* rth/tcg-ppc-pull: (21 commits)
tcg-ppc64: Implement CONFIG_QEMU_LDST_OPTIMIZATION
tcg-ppc64: Add _noaddr functions for emitting forward branches
tcg-ppc64: Streamline tcg_out_tlb_read
tcg-ppc64: Implement tcg_register_jit
tcg-ppc64: Handle long offsets better
tcg-ppc64: Tidy register allocation order
tcg-ppc64: Look through a constant function descriptor
tcg-ppc64: Fold constant call address into descriptor load
tcg-ppc64: Don't load the static chain from TCG
tcg-ppc64: Avoid code for nop move
tcg-ppc64: Use tcg_out64
tcg-ppc64: Use TCG_REG_Rn constants
tcg-ppc64: More use of TAI and SAI helper macros
tcg-ppc64: Reformat tcg-target.c
tcg-ppc: Fix and cleanup tcg_out_tlb_check
tcg-ppc: Use conditional branch and link to slow path
tcg-ppc: Cleanup tcg_out_qemu_ld/st_slow_path
tcg-ppc: Avoid code for nop move
tcg-ppc: use new return-argument ld/st helpers
tcg-ppc: fix qemu_ld/qemu_st for AIX ABI
...
Message-id: 1380126458-3247-1-git-send-email-rth@twiddle.net
# By Bandan Das (3) and Gerd Hoffmann (1)
# Via Gerd Hoffmann
* kraxel/audio.1:
audio: remove CONFIG_MIXEMU configure option
hda-codec: make mixemu selectable at runtime
hda-codec: refactor common definitions into a header file
audio maintainers update
Message-id: 1380011943-15083-1-git-send-email-kraxel@redhat.com
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
Currently, we are enforcing the _FORTIFY_SOURCE=2 without any
previous detection if the macro has been already defined, e.g.
by environment, or is just enabled by compiler by default.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The usb-host code has been rewritten for qemu 1.5 to use libusb,
the old code has been left in as temporary fallback. Now we are
two releases further out, targeting the 1.7 release. No major
issues with the new code poped up until now. Time to remove it
from tre tree. Should we ever need it again for some reason --
git has a copy for us in the history.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'gthread' coroutine backend was written before the freelist (aka
pool) existed in qemu-coroutine.c.
This means that every thread is expected to exit when its coroutine
terminates. It is not possible to reuse threads from a pool.
This patch automatically disables the pool when 'gthread' is used. This
allows the 'gthread' backend to work again (for example,
tests/test-coroutine completes successfully instead of hanging).
I considered implementing thread reuse but I don't want quirks like CPU
affinity differences due to coroutine threads being recycled. The
'gthread' backend is a reference backend and it's therefore okay to skip
the pool optimization.
Note this patch also makes it easy to toggle the pool for benchmarking
purposes:
./configure --with-coroutine-backend=ucontext \
--disable-coroutine-pool
Reported-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This program can do a sendmsg call to transfer fd with unix
socket, which is not supported in python2.
The built binary will not be deleted in clean, but it is a
existing issue in ./tests, which should be solved in another
patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* aarch64 preparation patchset (excluding the defconfigs, so this
doesn't actually enable the new targets yet)
* minor bugfixes and cleanups
* disable "-cpu any" in system emulation mode
* fix ARMv7M stack alignment on reset
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=oraU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130910' into staging
ARM queue:
* aarch64 preparation patchset (excluding the defconfigs, so this
doesn't actually enable the new targets yet)
* minor bugfixes and cleanups
* disable "-cpu any" in system emulation mode
* fix ARMv7M stack alignment on reset
# gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Alexander Graf (13) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130910: (28 commits)
configure: Add handling code for AArch64 targets
linux-user: Add AArch64 support
linux-user: Allow targets to specify a minimum uname release
linux-user: Add AArch64 termbits.h definitions
linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64
linux-user: Make sure NWFPE code is 32 bit ARM only
linux-user: Add signal handling for AArch64
linux-user: Fix up AArch64 syscall handlers
linux-user: Add syscall number definitions for AArch64
linux-user: Add cpu loop for AArch64
linux-user: Don't treat AArch64 cpu names specially
target-arm: Add AArch64 gdbstub support
target-arm: Add AArch64 translation stub
target-arm: Prepare translation for AArch64 code
target-arm: Disable 32 bit CPUs in 64 bit linux-user builds
target-arm: Add new AArch64CPUInfo base class and subclasses
target-arm: Pass DisasContext* to gen_set_pc_im()
target-arm: Fix target_ulong/uint32_t confusions
target-arm: Export cpu_env
target-arm: Extract the disas struct to a header file
...
Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Add the necessary code to configure to handle AArch64 as a target
CPU (we already have some code for supporting it as host). Note
that this doesn't enable the AArch64 targets yet.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-23-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-12-git-send-email-john.rigby@linaro.org
[PMM:
* don't need to set TARGET_ABI_DIR to aarch64 as that is the default
* don't build nwfpe -- this is 32 bit legacy only
* rewrite commit message
* add aarch64 to the list of "fdt required" targets
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds VSS provider and requester as a qga-vss.dll, which is loaded by
Windows VSS service as well as by qemu-ga.
"provider.cpp" implements a basic stub of a software VSS provider.
Currently, this module only relays a frozen event from VSS service to the
agent, and thaw event from the agent to VSS service, to block VSS process
to keep the system frozen while snapshots are taken at the host.
To register the provider to the guest system as COM+ application, the type
library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl),
VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also
adds pre-compiled .tlb file in the repository in order to enable
cross-compile qemu-ga.exe for Windows with VSS support.
"requester.cpp" provides the VSS requester to kick the VSS snapshot process.
Qemu-ga.exe works without the DLL, although fsfreeze features are disabled.
These functions are only supported in Windows 2003 or later. In older
systems, fsfreeze features are disabled.
In several versions of Windows which don't support attribute
VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error
VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error.
To solve this fundamentally, we need a framework to handle mount writable
snapshot on guests, which is required by VSS auto-recovery feature
(cleanup phase after a snapshot is taken).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
To enable VSS support in qemu-ga for Windows, header files included in
VSS SDK are required.
The VSS support is enabled by the configure option like below:
./configure --with-vss-sdk="/path/to/VSS SDK"
If the path is omitted, it tries to search the headers from default paths
and VSS support is enabled only if the SDK is found.
VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is
specified.
VSS SDK is available from:
http://www.microsoft.com/en-us/download/details.aspx?id=23490
To cross-compile using mingw, you need to setup the SDK on Windows
environments to extract headers. You can also extract the SDK headers on
POSIX environments using scripts/extract-vss-headers and msitools.
In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to
specify path to Windows SDK, which may be used for native-compile of .tlb
file of qemu-ga VSS provider. However, this is usually unnecessary because
pre-compiled .tlb file is included.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add configuration for C++ compiler in configure and Makefiles.
The C++ compiler is choosed as following:
- ${CXX}, if it is specified.
- ${cross_prefix}g++, if ${cross_prefix} is specified.
- Otherwise, c++ is used.
Currently, usage of C++ language is only for access to Windows VSS
using COM+ services in qemu-guest-agent for Windows.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Micael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
# By Stefan Weil (6) and others
# Via Michael Tokarev
* mjt/trivial-patches:
aio / timers: use g_usleep() not sleep()
adlib: sort offsets in portio registration
qmp: fix integer usage in examples
tci: Remove function tcg_out64 (fix broken build)
target-arm: Report unimplemented opcodes (LOG_UNIMP)
pflash_cfi02.c: fix debug macro
configure: Remove unneeded redirections of stderr (pkg-config --exists)
configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)
configure: Don't write .pyc files by default (python -B)
curl: qemu_bh_new() can never return NULL
slirp/arp_table.c: Avoid shifting into sign bit of signed integers
configure: disable clang -Wstring-plus-int warning
rdma: silly ipv6 bugfix
misc: Fix some typos in names and comments
slirp: Port redirection option behave differently on Linux and Windows
Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Predicate options (--exists, --atleast-version, ...) of pkg-config dont't
print error messages to stderr, so redirecting stderr is not necessary.
Combining a predicate option with --modversion is not necessary for tests.
Instead of testing with --modversion, --exists can be used.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For existing libraries, pkg-config --cflags and pkg-config --libs won't
print error messages to stderr, so redirecting stderr is not necessary.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When a Python script is run, Python normally writes bytecode into a .pyc file.
QEMU's build process uses several Python scripts which are called from
configure or make.
The generated .pyc files take disk space without being of much use, because
those scripts are short, not time critical and only called a few times.
Python's option -B disables writing of .pyc files. QEMU now uses "python -B"
as default, but it is still possible to choose a different call by passing
--python=PYTHON to configure.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some versions of clang will warn about adding integers to strings:
disas/i386.c:4753:23: error: adding 'char' to a string does not append
to the string [-Werror,-Wstring-plus-int]
oappend ("%es:" + intel_syntax);
~~~~~~~^~~~~~~~~~~~~~
disas/i386.c:4753:23: note: use array indexing to silence this warning
oappend ("%es:" + intel_syntax);
^
& [ ]
disas/i386.c uses this idiom to to skip a "%" prefix if using intel
rather than AT&T syntax. This seems like a reasonable thing to do,
and I don't think anybody contributing to QEMU is likely to believe
that '+' is a string concatenation operator in C, so just disable
-Wstring-plus-int.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Where supported, called prctl(PR_SET_TIMERSLACK, 1, ...) to
set one nanosecond timer slack to increase precision of timer
calls.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add qemu_poll_ns which works like g_poll but takes a nanosecond
timeout.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move qemu-ga build check out of if softmmu.. into its own section.
We want to build qemu-ga for _guest_ even if system build isn't
done. It is controlled separately using --enable-guest-agent.
Additionally, give error message if guest agent is requested but
not supported.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The parser handles erroneous input badly. To be improved shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1374939721-7876-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
v2 update:
- set libseccomp 2.1.0 as requirement on configure script.
Since libseccomp 2.0 there's no need to check the architecture type
anymore.
Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1374518017-10424-2-git-send-email-otubo@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* riku/linux-user-for-upstream: (21 commits)
linux-user: Handle compressed ISA encodings when processing MIPS exceptions
linux-user: Unlock mmap_lock when resuming guest from page_unprotect
linux-user: Reset copied CPUs in cpu_copy() always
linux-user: Fix epoll on ARM hosts
linux-user: fix segmentation fault passing with h2g(x) != x
linux-user: Fix pipe syscall return for SPARC
linux-user: Fix target_stat and target_stat64 for OpenRISC
linux-user: Avoid conditional cpu_reset()
configure: Make NPTL non-optional
linux-user: Enable NPTL for x86-64
linux-user: Add i386 TLS setter
linux-user: Clean up handling of clone() argument order
linux-user: Add missing 'break' in i386 get_thread_area syscall
linux-user: Enable NPTL for m68k
linux-user: Enable NPTL for SPARC targets
linux-user: Enable NPTL for OpenRISC
linux-user: Move includes of target-specific headers to end of qemu.h
configure: Enable threading for unicore32-linux-user
configure: Enable threading on all ppc and mips linux-user targets
configure: Don't say target_nptl="no" if there is no linux-user target
...
Conflicts:
linux-user/main.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Code that does need to be visible is kept
well contained inside this file and this is the only
new additional file to the entire patch.
This file includes the entire protocol and interfaces
required to perform RDMA migration.
Also, the configure and Makefile modifications to link
this file are included.
Full documentation is in docs/rdma.txt
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now all linux-user targets support building with NPTL, we can make it
mandatory. This is a good idea because:
* NPTL is no longer new and experimental; it is completely standard
* in practice, linux-user without NPTL is nearly useless for
binaries built against non-ancient glibc
* it allows us to delete the rather untested code for handling
the non-NPTL configuration
Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the
bsd-user codebase alone. This makes no change for bsd-user, since
our configure test for NPTL had a "#include <linux/futex.h>"
which means bsd-user would never have been compiled with
CONFIG_USE_NPTL defined, and it still is not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add x86-64 implementation of cpu_set_tls() (like the kernel, we
just have to call do_arch_prctl() to set FS); this allows us to
enable NPTL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We can easily set the TLS on i386. Add code to do so.
Signed-off-by: Alexander Graf <agraf@suse.de>
[PMM: also remove "target_nptl=no" line from configure, for
consistency with other patches in this series]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For m68k, per-thread data is a purely kernel construct with no
CPU level support. Implement it via a field in the TaskState structure,
used by cpu_set_tls() and the set_thread_area/get_thread_area
syscalls. This allows us to enable compilation with NPTL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Provide the missing cpu_set_tls(), and resolve the FIXME in
cpu_clone_regs() by clearing the carry flag for the child.
This allows us to turn on building with NPTL for SPARC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The OpenRISC kernel ignores CLONE_SETTLS in its copy_thread()
implementation, so a cpu_set_tls() implementation is a no-op.
cpu_clone_regs() was setting the syscall return value in the
wrong register -- it is gpr[11], not gpr[2]. With these two
things fixed, we can compile with NPTL enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
unicore32-linux-user provides cpu_set_tls(), so the failure
to enable target_nptl was presumably an oversight. Enable it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Though threading (target_nptl) was enabled on the base PPC and MIPS
targets, it wasn't enabled for the variants mipsn32, mipsn32el,
mips64, mips64el, ppc64 or ppc46abi32 (probably an oversight).
Enable threading consistently on all these targets.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For architectures with no linux-user target, don't claim no NPTL
support. This has no behavioural change, but it means that we
won't accidentally add a new linux-user target without threading
support in future (because attempting to do so would be a compile
failure rather than a silent lack of support).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
