This **CHANGES** the human monitor "nmi" command behavior.
Currently it accepts an CPU argument which, when provided, will send
the NMI to the specified CPU. This feature is of discussable value
though and HMP shouldn't have more features than QMP, so let's use
QMP's instead (it's also simpler).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
inject-nmi command injects an NMI on all CPUs of guest.
It is only supported for x86 guest currently, it will
returns "Unsupported" error for non-x86 guest.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Read them via KVM_GET_SREGS in kvm_arch_get_registers(),
and display them in "info registers".
Also get CR and PID from the existing KVM_GET_REGS.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys
improves readability and allows removing some type casts.
lduw_phys and ldl_phys were not used because both require aligned
addresses. Therefore it is not possible to simply replace existing
calls by one of these functions.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
All other type casts in calls of cpu_physical_memory_read are
used by hardware emulations and will be fixed by separate patches.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On ppc machines with hash table MMUs, the special purpose register SDR1
contains both the base address of the encoded size (hashed) page tables.
At present, we interpret the SDR1 value within the address translation
path. But because the encodings of the size for 32-bit and 64-bit are
different this makes for a confusing branch on the MMU type with a bunch
of curly shifts and masks in the middle of the translate path.
This patch cleans things up by moving the interpretation on SDR1 into the
helper function handling the write to the register. This leaves a simple
pre-sanitized base address and mask for the hash table in the CPUState
structure which is easier to work with in the translation path.
This makes the translation path more readable. It addresses the FIXME
comment currently in the mtsdr1 helper, by validating the SDR1 value during
interpretation. Finally it opens the way for emulating a pSeries-style
partition where the hash table used for translation is not mapped into
the guests's RAM.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This was done with:
sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
$(git grep -l 'qemu_get_clock\>' )
sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
$(git grep -l 'qemu_new_timer\>' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
There was exactly one false positive in qemu_run_timers:
- current_time = qemu_get_clock (clock);
+ current_time = qemu_get_clock_ns (clock);
which is of course not in this patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on patch by Glauber Costa:
To allow management applications like libvirt to apply CPU affinities to
the VCPU threads, expose their ID via info cpus. This patch provides the
pre-existing and used interface from qemu-kvm.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Allow to tell cpu_x86_inject_mce that it should ignore Action Optional
MCE events when the target VCPU is still processing another one. This
will be used by KVM soon.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
As this service is used by the human monitor, make sure that errors get
reported to the right channel, and also raise the verbosity.
This requires to move Monitor typedef in qemu-common.h to resolve the
include dependency.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Define and use dedicated constants for vm_stop reasons, they actually
have nothing to do with the EXCP_* defines used so far. At this chance,
specify more detailed reasons so that VM state change handlers can
evaluate them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
commit 52c18be9e9 introduced a regression in the
change vnc password command that changed the behavior of setting the VNC
password to an empty string from disabling login to disabling authentication.
This commit refactors the code to eliminate this overloaded semantics in
vnc_display_password and instead introduces the vnc_display_disable_login. The
monitor implementation then determines the behavior of an empty or missing
string.
Recently, a set_password command was added that allows both the Spice and VNC
password to be set. This command has not shown up in a release yet so the
behavior is not yet defined.
This patch proposes that an empty password be treated as an empty password with
no special handling. For specifically disabling login, I believe a new command
should be introduced instead of overloading semantics.
I'm not sure how Spice handles this but I would recommend that we have Spice
and VNC have consistent semantics here for the 0.14.0 release.
Reported-by: Neil Wilson <neil@aldur.co.uk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Add a proper return to make sure that login is really disabled instead of
relying on the VNC server to treat empty passwords specially
use after free in do_wav_capture() on the error path.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Handle spice client migration, i.e. inform a spice client connected
about the new host and connection parameters, so it can move over the
connection automatically.
The monitor command has a not-yet used protocol argument simliar to
set_password and expire_password commands. This allows to add a simliar
feature to vnc in the future. Daniel Berrange plans to work on this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
strtosz() needs to return a 64 bit type even on 32 bit
architectures. Otherwise qemu-img will fail to create disk
images >= 2GB
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the following test case is injected with mce command, maybe user could not
get the expected result.
DATA
command cpu bank status mcg_status addr misc
(qemu) mce 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Expected Result
panic type: "Fatal Machine check"
That is because each mce command can only inject the given cpu and could not
inject mce interrupt to other cpus. So user will get the following result:
panic type: "Fatal machine check on current CPU"
"broadcast" option is used for injecting dummy data into other cpus. Injecting
mce with this option the expected result could be gotten.
Usage:
Broadcast[on]
command broadcast cpu bank status mcg_status addr misc
(qemu) mce -b 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Broadcast[off]
command cpu bank status mcg_status addr misc
(qemu) mce 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Fix usage of wrong variable, spotted by clang:
/src/qemu/monitor.c:2278:36: warning: The left operand of '&' is a garbage value
prot = pde & (PG_USER_MASK | PG_RW_MASK |
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
'info mem' didn't show correct information for PAE mode and
x86_64 long mode.
Fix by implementing the output for missing modes.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
'info tlb' didn't show correct information for PAE mode and
x86_64 long mode.
Implement the missing modes. Also print NX bit for PAE and long modes.
Fix off-by-one error in 32 bit mode mask.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds new set_password and expire_password monitor commands
which allows to change and expire the password for spice and vnc
connections. See the doc update patch chunk for details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The patch adds a 'query-spice' monitor command which returns
informations about the spice server configuration and also a list of
channel connections.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for connection events to spice. The events are
quite simliar to the vnc events. Unlike vnc spice uses multiple tcp
channels though. qemu will report every single tcp connection (aka
spice channel). If you want track spice sessions only you can filter
for the main channel (channel-type == 1).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The first if/else clause in handler_audit() makes no sense for two
reasons:
1. this function is now called only by QMP code, so testing if
it's a QMP call makes no sense anymore
2. the else clause first asserts that there's no error in the
monitor object, then it tries to free it!
Just drop it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 030db6e89d dropped do_info() usage from QMP and introduced
qmp_call_query_cmd(). However, the new function doesn't emit QMP's
default OK response when the handler doesn't return data.
Fix that by also calling monitor_protocol_emitter() when
ret_data == NULL, so that the default response is emitted.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This command allows QMP clients to execute HMP commands.
Please, check the documentation added to the qmp-commands.hx file
for additional details about the interface and its limitations.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
'f' double is no longer used, and we should be using floating point
variables to store byte sizes. Remove it.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Octet format relies on strtosz which supports K/k, M/m, G/g, T/t
suffixes and unit support for humans, like 1.3G
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There was no warning if a bad trace event name was given to
'trace-event' command, thus the user could think that the command
was successful even if this was not the case.
Print a warning if the user tries to enable a trace event which is not
known.
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Let's be consistent and call it hmp-commands.hx, so that we have
qmp-commands.hx for QMP and hmp-commands.hx for HMP.
Please, note that this commit doesn't touch qemu-monitor.texi. All
texi files have the qemu- prefix and I don't think it's worth
changing that.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Calls a QObject handler and emits the QMP response, also drops
monitor_call_handler() which is now unused.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This avoids handle_user_command() calling monitor_call_handler(),
which is currently shared with QMP.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
That name makes no sense anymore, as dispatch tables have been split,
a better name is handler_is_qobject(), which really communicates
the handler's type.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This function was only needed when QMP and HMP were sharing dispatch
tables, this is no longer true so just drop it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
QMP has its own dispatch table and documentation file
(qmp-commands.hx), we can now drop the following QMP specific info
from qemu-monitor.hx:
o SQMP/EQMP sections
o The qmp_capabilities command
o The query-commands command
However, note that QObject handlers entries are not being removed.
This will only happen when we introduce a proper QMP call interface.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
QMP has its own dispatch tables, we can now drop the following
checks:
o 'info' command: this command doesn't exist in QMP's
dispatch table, the right thing will happen when it's
issued by a client (ie. command not found error)
o monitor_handler_ported(): all QMP handlers are 'ported', no
need to check for that
o monitor_cmd_user_only(): no HMP handler will exist in QMP's
dispatch tables, that's why we have split them after all :-)
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The new table is a copy of HMP's table, containing only QObject
handlers.
In the near future HMP will be making QMP calls and then we will
be able to drop QObject handlers from HMP's table.
From now on, QMP and HMP have different query command dispatch
tables.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Also update QMP functions to use it. The table is generated
from the qmp-commands.hx file.
From now on, QMP and HMP have different command dispatch
tables.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Next commit needs this new function: it will introduce the
the QMP's command dispatch table and qmp_find_cmd() will be
used to search on it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
If I understood it correcty, the is_async_return() logic was only
used to prevent QMP from issuing duplicated success responses
for asynchronous handlers.
However, QMP doesn't use do_info() anymore so this is dead logic
and (hopefully) can be safely dropped.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since its inception, QMP has been using HMP's do_info() function
to run query commands.
This was a bad choice, as it made do_info() more complex and
contributed to couple QMP and HMP.
This commit fixes that by doing the following changes:
1. Introduce qmp_find_query_cmd() and use it to directly lookup
the info_cmds table
2. Introduce qmp_call_query_cmd() so that QMP code is able
to call query handlers without using do_info()
3. Drop do_info() usage (via monitor_find_command("info"))
We need all the three changes in one shot so that we don't break
the calling of query commands in QMP.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Next commit will change how query commands are handled in a
way that the 'cmd' sanity check is also going to be needed
for query commands handling.
Let's move it out of the else body then.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It's a generic version of monitor_find_command() which searches
the dispatch table passed as an argument.
Future commits will introduce new dispatch tables, so we need
common code to search them.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Expaned '-mon' arg to allow a 'pretty=on' flag. This makes the
monitor pretty print its replies to easy human debugging / reading
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch adds the trace-file command:
trace-file [on|off|flush]
Open, close, or flush the trace file. If no argument is given,
the status of the trace file is displayed.
The trace file is turned on by default but is only written out when the
trace buffer becomes full. The flush operation can be used to force
write out at any time.
Turning off the trace file does not change the state of trace events;
tracing will continue to the trace buffer. When the trace file is off,
use "info trace" to display the contents of the trace buffer in memory.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This commit also contains the trace-file sub-command from the following
commit:
commit 5ce8d1a957afae2c52ad748944ce72848ccf57bd
Author: Prerna Saxena <prerna@linux.vnet.ibm.com>
Date: Wed Aug 4 16:23:54 2010 +0530
trace: Add options to specify trace file name at startup and runtime
This patch adds an optional command line switch '-trace' to specify the
filename to write traces to, when qemu starts.
Eg, If compiled with the 'simple' trace backend,
[temp@system]$ qemu -trace FILENAME IMAGE
Allows the binary traces to be written to FILENAME instead of the option
set at config-time.
Also, this adds monitor sub-command 'set' to trace-file commands to
dynamically change trace log file at runtime.
Eg,
(qemu)trace-file set FILENAME
This allows one to set trace outputs to FILENAME from the default
specified at startup.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds support for dynamically enabling/disabling of trace events.
This is done by internally maintaining each trace event's state, and
permitting logging of data from a trace event only if it is in an
'active' state.
Monitor commands added :
1) info trace-events : to view all available trace events and
their state.
2) trace-event NAME on|off : to enable/disable data logging from a
given trace event.
Eg, trace-event paio_submit off
disables logging of data when
paio_submit is hit.
By default, all trace-events are disabled. One can enable desired trace-events
via the monitor.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Monitor command 'info trace'
Monitor command 'info trace' to display contents of trace buffer
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Remove monitor.h dependency from simpletrace
User-mode targets don't have a monitor so the simple trace backend
currently does not build on those targets. This patch abstracts the
monitor printing interface so there is no direct coupling between
simpletrace and the monitor.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This code was originally developed by Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch improves the resilience of the load_vmstate() function, doing
further and better ordered tests.
In load_vmstate(), if there is any error on bdrv_snapshot_goto(), except if the
error is on VM state device, load_vmstate() will return zero and the VM will be
started with major corruption chances.
The current process:
- test if there is any writable device without snapshot support
- if exists return -error
- get the device that saves the VM state, possible return -error but unlikely
because it was tested earlier
- flush I/O
- run bdrv_snapshot_goto() on devices
- if fails, give an warning and goes to the next (not good!)
- if fails on the VM state device, return zero (not good!)
- check if the requested snapshot exists on the device that saves the VM state
and the state is not zero
- if fails return -error
- open the file with the VM state
- if fails return -error
- load the VM state
- if fails return -error
- return zero
New behavior:
- get the device that saves the VM state
- if fails return -error
- check if the requested snapshot exists on the device that saves the VM state
and the state is not zero
- if fails return -error
- test if there is any writable device without snapshot support
- if exists return -error
- test if the devices with snapshot support have the requested snapshot
- if anyone fails, return -error
- flush I/O
- run snapshot_goto() on devices
- if anyone fails, return -error
- open the file with the VM state
- if fails return -error
- load the VM state
- if fails return -error
- return zero
do_loadvm must not call vm_start if any error has occurred in load_vmstate.
Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a 'cont' is issued on a VM that's just waiting for an incoming
migration, the VM reboots and boots into the guest, possibly corrupting
its storage since it could be shared with another VM running elsewhere.
Ensure that a VM started with '-incoming' is only run when an incoming
migration successfully completes.
A new qerror, QERR_MIGRATION_EXPECTED, is added to signal that 'cont'
failed due to no incoming migration has been attempted yet.
Reported-by: Laine Stump <laine@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Ported commands that are marked 'user_only' will not be considered for
QMP monitor sessions. This allows to implement new commands that do not
(yet) provide a sufficiently stable interface for QMP use.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is similar to qmp_check_client_args(), but it checks if
the input object follows the specification (QMP/qmp-spec.txt
section 2.3).
As we're limited to three keys, the work here is quite simple:
we iterate over the input object, checking each time if the
current argument complies to the specification.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Previous two commits added qmp_check_client_args(), which
fully replaces this code and is way better.
It's important to note that the new checker doesn't support
the '/' arg type. As we don't have any of those handlers
converted to QMP, this is just dead code.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This commit introduces the second (and last) part of QMP's new
argument checker.
The job is done by check_client_args_type(), it iterates over
the client's argument qdict and for for each argument it checks
if it exists and if its type is valid.
It's important to observe the following changes from the existing
argument checker:
- If the handler accepts an O-type argument, unknown arguments
are passed down to it. It's up to O-type handlers to validate
their arguments
- Boolean types (eg. 'b' and '-') don't accept integers anymore,
only json-bool
- Argument types '/' and '.' are currently unsupported under QMP,
thus they're not handled
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Current QMP's argument checker is more complex than it should be
and has (at least) one serious bug: it ignores unknown arguments.
To solve both problems we introduce a new argument checker. It's
added on top of the existing one, so that there are no regressions
during the transition.
This commit introduces the first part of the new checker, which
is run by qmp_check_client_args() and does the following:
1. Check if all mandatory arguments were provided
2. Set flags for argument validation
In order to do that, we transform the args_type string (from
qemu-montor.hx) into a qdict and iterate over it.
Next commit adds the new checker's second part: type checking and
invalid argument detection.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Historically, user monitor arguments beginning with '-' (eg. '-f')
were passed as integers down to handlers.
I've maintained this behavior in the new monitor because we didn't
have a boolean type at the very beginning of QMP. Today we have it
and this behavior is causing trouble to QMP's argument checker.
This commit fixes the problem by doing the following changes:
1. User Monitor
Before: the optional arg was represented as a QInt, we'd pass 1
down to handlers if the user specified the argument or
0 otherwise
This commit: the optional arg is represented as a QBool, we pass
true down to handlers if the user specified the
argument, otherwise _nothing_ is passed
2. QMP
Before: the client was required to pass the arg as QBool, but we'd
convert it to QInt internally. If the argument wasn't passed,
we'd pass 0 down
This commit: still require a QBool, but doesn't do any conversion and
doesn't pass any default value
3. Convert existing handlers (do_eject()/do_migrate()) to the new way
Before: Both handlers would expect a QInt value, either 0 or 1
This commit: Change the handlers to accept a QBool, they handle the
following cases:
A) true is passed: the option is enabled
B) false is passed: the option is disabled
C) nothing is passed: option not specified, use
default behavior
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The current asynchronous command API doesn't return a QMP response
when the async command fails.
This is easy to reproduce with the balloon command (the sole async
command we have so far): run qemu w/o the '-balloon virtio' option
and try to issue the balloon command via QMP: no response will be
sent to the client.
This commit fixes the problem by making qmp_async_cmd_handler()
return the handler's error code and then calling
monitor_protocol_emitter() if the handler has returned an error.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
As we want to add more flags to monitor commands, convert the only so
far existing one accordingly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We now have to move forward to the next argument type via next_arg_type.
This patch fixes completion for 'eject' and maybe also other commands.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Given too many arguments or an invalid command, we were leaking the
duplicated argument strings.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The code comes from
http://lists.gnu.org/archive/html/qemu-devel/2010-05/msg02788.html
Without this patch it is not possible to send at least 10 special
characters (\|'"`~:;[]{}) via the monitor sendkey command.
Signed-off-by: Bernhard M. Wiedemann <qemudevbmw@lsmod.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This command was of minimal use before, now it is useless as the hpet
become a qdev device and is thus easily discoverable. We should
definitely not set query-hpet in QMP's stone, and there is also no good
reason to keep it for the interactive monitor.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anything that moves hundreds of lines out of vl.c can't be all bad.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previous commit added QMP documentation to the qemu-monitor.hx
file, it's is a copy of this information.
While it's good to keep it near code, maintaining two copies of
the same information is too hard and has little benefit as we
don't expect client writers to consult the code to find how to
use a QMP command.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a new version of the (now reverted) following commit:
0e8d2b5575
The 'quit' Monitor command (implemented by do_quit()) calls
exit() directly, this is problematic under QMP because QEMU
exits before having a chance to send the ok response.
Clients don't know if QEMU exited because of a problem or
because the 'quit' command has been executed.
This commit fixes that by making do_quit() use
qemu_system_shutdown_request(), so that we exit gracefully.
Thanks to Paolo Bonzini <pbonzini@redhat.com> for suggesting
this solution.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Recalculate Sparc64 CPU flags on interrupts, otherwise some earlier
flags could be stored to pstate.
Refactor PSR/CCR/CWP handling: concentrate the actual
functions to op_helper.c.
Thanks to Igor Kovalenko for reporting.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Current code of monitor command: 'change', used to open file for read-write
uncoditionally. Change to open it as read-only for CDROM, and read-write for all others.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's emitted when the Virtual Machine resumes execution.
We currently have the STOP event but don't have the matching
RESUME one, this means that clients are notified when the VM
is stopped but don't get anything when it resumes.
Let's fix that as it's already causing some trouble to libvirt.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If there is already a fd in s->msgfd before recvmsg it is
closed by parts that this patch does not touch. So, only
one descriptor can be "leaked" by attaching it to a command
other than getfd.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The 'quit' Monitor command (implemented by do_quit()) calls
exit() directly, this is problematic under QMP because QEMU
exits before having a chance to send the ok response.
Clients don't know if QEMU exited because of a problem or
because the 'quit' command has been executed.
This commit fixes that by moving the exit() call to the main
loop, so that do_quit() requests the system to quit, instead
of calling exit() directly.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The QERR_QMP_BAD_INPUT_OBJECT error is going to be used only
for two problems: the input is not an object or the "execute"
key is missing.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
What is known today as bdrv_open2 becomes the new bdrv_open. All remaining
callers of the old function are converted to the new one. In some places they
even know the right format, so they should have used bdrv_open2 from the
beginning.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Trivial, as it never fails, doesn't have output nor return
any data.
Note that it's also available under QMP, as kvm-autotest
needs this.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is a boolean value. Human monitor accepts "on" or "off".
Consistent with option parsing (see parse_option_bool()).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
To make 'b' available for boolean argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Currently when using the change command to switch the file in the cd drive
the command doesn't complain if the file doesn't exit or can't be opened
and the drive keeps the existing image. This patch adds a qerror_report
call to print a message out indicating the failure. This error message
can be used to catch failures.
Current behavior:
QEMU 0.12.50 monitor - type 'help' for more information
(qemu) info block
ide0-hd0: type=hd removable=0 file=/dev/null ro=0 drv=host_device encrypted=0
ide1-cd0: type=cdrom removable=1 locked=0 [not inserted]
floppy0: type=floppy removable=1 locked=0 [not inserted]
sd0: type=floppy removable=1 locked=0 [not inserted]
(qemu) change ide1-cd0 /home/rharper/work/isos/Fedora-9-i386-DVD.iso
(qemu) info block
ide0-hd0: type=hd removable=0 file=/dev/null ro=0 drv=host_device encrypted=0
ide1-cd0: type=cdrom removable=1 locked=0
file=/home/rharper/work/isos/Fedora-9-i386-DVD.iso ro=0 drv=raw encrypted=0
floppy0: type=floppy removable=1 locked=0 [not inserted]
sd0: type=floppy removable=1 locked=0 [not inserted]
(qemu) change ide1-cd0 /tmp/non_existent_file.iso
(qemu) info block
ide0-hd0: type=hd removable=0 file=/dev/null ro=0 drv=host_device encrypted=0
ide1-cd0: type=cdrom removable=1 locked=0 [not inserted]
floppy0: type=floppy removable=1 locked=0 [not inserted]
sd0: type=floppy removable=1 locked=0 [not inserted]
(qemu)
With patch:
QEMU 0.12.50 monitor - type 'help' for more information
(qemu) change ide1-cd0 /tmp/non_existent_file.iso
Could not open '/tmp/non_existent_file.iso'
(qemu)
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the human monitor, it declares a single optional argument to be
parsed according to the QemuOptsList given by its name.
In QMP, it declares an optional argument for each member of the
QemuOptsList.
Restriction: only lists with empty desc are supported for now. Good
enough for the job at hand. We'll lift the restriction when we need
that.
While fully converted handlers are not supposed to print anything when
running in a QMP monitor, they are free to print in a human monitor.
For instance, device_add (not yet converted) prints help, and will
continue to do so after conversion.
Moreover, utility functions converted to QError should remain usable
from unconverted handlers.
Two problems:
* handler_audit() complains when a converted handler prints. Limit
that to QMP monitors.
* With QMP, handlers need to pass the error object by way of
monitor_set_error(). However, we do that both for QMP and for the
human monitor. The human monitor prints the error object after the
handler returns. If the handler prints anything else, that output
"overtakes" the error message.
Limit use of monitor_set_error() to QMP monitors. Update
handler_audit() accordingly.
qemu_error_sink can either point to a monitor or a file. In practice,
it always points to the current monitor if we have one, else to
stderr. Simply route errors to the current monitor or else to stderr,
and remove qemu_error_sink along with the functions to control it.
Actually, the old code switches the sink slightly later, in
handle_user_command() and handle_qmp_command(), than it gets switched
now, implicitly, by setting the current monitor in monitor_read() and
monitor_control_read(). Likewise, it switches back slightly earlier
(same places). Doesn't make a difference, because there are no calls
of qemu_error() in between.
Commits 376253ec..731b0364 introduced global variable cur_mon, which
points to the "default monitor" (if any), except during execution of
monitor_read() or monitor_control_read() it points to the monitor from
which we're reading instead (the "current monitor"). Monitor command
handlers run within monitor_read() or monitor_control_read().
Default monitor and current monitor are really separate things, and
squashing them together is confusing and error-prone.
For instance, usb_host_scan() can run both in "info usbhost" and
periodically via usb_host_auto_check(). It prints to cur_mon, which
is what we want in the former case: the monitor executing "info
usbhost". But since that's the default monitor in the latter case, it
periodically spams the default monitor there.
A few places use cur_mon to log stuff to the default monitor. If we
ever log something while cur_mon points to current monitor instead of
default monitor, the log temporarily "jumps" to another monitor.
Whether that can or cannot happen isn't always obvious.
Maybe logging to the default monitor (which may not even exist) is a
bad idea, and we should log to stderr or a logfile instead. But
that's outside the scope of this commit.
Change cur_mon to point to the current monitor. Create new
default_mon to point to the default monitor. Update users of cur_mon
accordingly.
This fixes the periodical spamming of the default monitor by
usb_host_scan(). It also stops "log jumping", should that problem
exist.
It's emitted whenever the watchdog device's timer expires. The action
taken is provided in the 'data' member.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This event has been introduced in the first round of QMP commits,
turns out that it's based on the usage of the EXCP_DEBUG macro,
which has discussable semantics when exposed through QMP.
As libvirt doesn't use this, let's just drop it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch application failed. My patch adds a cb() call in
do_balloon(), but the change in git has added the cb() call to
do_info_balloon(). That is causing qemu segfaults. Applying the
following should correct the damage. Thanks.
Fix for commit: 5c366a8a3d
The cb() call is needed in do_balloon(), not do_info_balloon().
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It was broken by 09b9418c6d. (!env && !is_physical) != (!is_physical)
when env is true.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Arghh... Adding missing S-O-B
Hi Anthony. I wonder if there was a problem when importing my async
command handler patchset. Since the 'balloon' command completes
immediately, it must call the completion callback before returning.
That call was missing but is added by the patch below.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Handlers can generate only one error in a call, we let the
programmer know if they brake this rule and clients will only
get the first generated error.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QObject Monitor handlers should not call any Monitor print
function: they should only build objects, printing is done
by common code.
Current QMP code will ignore such calls, as we can't send
garbage to clients, additionally it will also emit an
undefined error on the assumption that print calls usually
report errors.
However, the right way to deal with this is to rely on a
return code. This has been fixed by other commit already.
Now, this commit drops the error from monitor_vprintf() and
adds a better debugging mechanism for those 'stray' prints:
we count them if debug is enabled and let the developer know
if a QObject handler is trying to print anything.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit verifies the following two rules specified by
Markus Armbruster:
1. If the handler returns failure, it must have passed an error.
If it didn't, it's broken. Report an internal error to the client,
and report the bug to the programmer.
2. If the handler returns success, it must not have passed an error.
If it did, it's broken. Report the error to the client, and report
the bug to the programmer.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We can ignore calls to monitor_vprintf() in QMP mode and use
monitor_puts() directly in monitor_json_emitter().
This allows us to drop this ugly hack.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add configure options (--enable-debug-mon and --disable-debug-mon)
plus the MON_DEBUG() macro.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that all handlers are converted to cmd_new_ret(), we can rename
it back to cmd_new(). But now it returns a value.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Not that trivial as the call chain also has to be modified.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that this function only fails in QMP, in the user Monitor
it prints the help text instead.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The following handlers always succeed and hence can be converted
to cmd_new_ret() in the same commit.
- do_stop()
- do_quit()
- do_system_reset()
- do_system_powerdown()
- do_migrate_cancel()
- do_qmp_capabilities()
- do_migrate_set_speed()
- do_migrate_set_downtime()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to implement the new error handling and debugging
mechanism for command handlers, we need to change the cmd_new()
callback to return a value.
This commit introduces cmd_new_ret(), which returns a value and
will be used only temporarily to handle the transition from
cmd_new().
That is, as soon as all command handlers are ported to cmd_new_ret(),
it will be renamed back to cmd_new() and the new error handling
and debugging mechanism will be added on top of it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QMP's chardev event callback doesn't call
json_message_parser_destroy() on CHR_EVENT_CLOSED. As the call
to json_message_parser_init() on CHR_EVENT_OPENED allocates memory,
we'are leaking on close.
Fix that by just calling json_message_parser_destroy() on
CHR_EVENT_CLOSED.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Ideally, Monitor code should report an error only once and
return the error information up the call chain.
To assure that this happens as expected and that no error is
lost, we have an assert() in qemu_error_internal().
However, we still have not fully converted handlers using
monitor_printf() to report errors. As there can be multiple
monitor_printf() calls on an error, the assertion is easily
triggered when debugging is enabled; and we will get a memory
leak if it's not.
The solution to this problem is to allow multiple faults by only
reporting the first one, and to release the additional error objects.
A better mechanism to report multiple errors to programmers is
underway.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's not needed to check the return of qobject_from_jsonf()
anymore, as an assert() has been added there.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With this commit QMP will be started in Capabilities Negotiation
mode, where the only command allowed to run is 'qmp_capabilities'.
All other commands will return CommandNotFound error. Asynchronous
messages are not delivered either.
When 'qmp_capabilities' is successfully executed QMP enters in
Command mode, where all commands (except 'qmp_capabilities') are
allowed to run and asynchronous messages are delivered.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This command will be used to enable QMP capabilities advertised
by the capabilities array.
Note that it will be mandatory to issue this command in order
to make QMP functional (although this behavior is not being
enforced by this commit).
Also, as we don't have any capabilities yet, the new command
doesn't accept any arguments. I will postpone the decision for
a format for this until we get our first capability.
Finally, this command is visible from the user Monitor too, in
the meaning that you can execute it but it won't do anything.
Making it only visible in QMP is beyond this series' goal, as
it requires changes in unrelated places.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With capability negotiation support clients will only have a chance
to check QEMU's version (ie. issue 'query-version') after the
negotiation procedure is done.
It might be useful to clients to check QEMU's version before
negotiating features, though.
To allow that, this commit adds the QEMU's version object to the
greeting message.
Not really sure this is needed, but doesn't hurt anyway.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds the basic definitions for the BLOCK_IO_ERROR
event, but actual event emission will be introduced by the
next commits.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This changes the error message from "Invalid CPU index" to "Invalid
parameter index" in the human monitor.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a double value with optional suffixes ms, us, ns. We'll need
this to get migrate_set_downtime() QMP-ready.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a double value with optional suffixes G, g, M, m, K, k. We'll
need this to get migrate_set_speed() QMP-ready.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Function is_async_return() added by commit 940cc30d0d assumes
that 'data', which is returned by handlers, is always a QDict.
This is not true, as QLists can also be returned, in this case
we'll get a segfault.
Fix that by checking if 'data' is a QDict.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When using ballooning to manage overcommitted memory on a host, a system for
guests to communicate their memory usage to the host can provide information
that will minimize the impact of ballooning on the guests. The current method
employs a daemon running in each guest that communicates memory statistics to a
host daemon at a specified time interval. The host daemon aggregates this
information and inflates and/or deflates balloons according to the level of
host memory pressure. This approach is effective but overly complex since a
daemon must be installed inside each guest and coordinated to communicate with
the host. A simpler approach is to collect memory statistics in the virtio
balloon driver and communicate them directly to the hypervisor.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Qemu has a number of commands that can operate asynchronously (savevm, migrate,
etc) and it will be getting more. For these commands, the user monitor needs
to be suspended, but QMP monitors could continue to to accept other commands.
This patch introduces a new command API that isolates the details of handling
different monitor types from the actual command execution.
A monitor command can use this API by implementing the mhandler.cmd_async
handler (or info_async if appropriate). This function is responsible for
submitting the command and does not return any data although it may raise
errors. When the command completes, the QMPCompletion callback should be
invoked with its opaque data and the command result.
The process for submitting and completing an asynchronous command is different
for QMP and user monitors. A user monitor must be suspended at submit time and
resumed at completion time. The user_print() function must be passed to the
QMPCompletion callback so the result can be displayed properly. QMP monitors
are simpler. No submit time setup is required. When the command completes,
monitor_protocol_emitter() writes the result in JSON format.
This API can also be used to implement synchronous commands. In this case, the
cmd_async handler should immediately call the QMPCompletion callback. It is my
hope that this new interface will work for all commands, leading to a
drastically simplified monitor.c once all commands are ported.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The returned QObject is a QList of all buses. Each bus is
represented by a QDict, which has a key with a QList of all
PCI devices attached to it. Each device is represented by
a QDict.
As has happended to other complex conversions, it's hard to
split this commit as part of it are new functions which are
called by each other.
IMPORTANT: support for printing PCI bridge attached devices
is NOT part of this commit, it's going to be added by the
next commit, as it's untested.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
CC i386-softmmu/monitor.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_memory_save':
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1318: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_physical_memory_save':
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1345: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
make[1]: *** [monitor.o] Error 1
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
mon_get_cpu() can't return null pointer, because it passes its return
value to cpu_synchronize_state() first, which crashes if its argument
is null.
Remove the (pretty cheesy) handling of this non-existing error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit f039a563f2 introduces
a regression as monitor_protocol_event() will return in
the first user Monitor it finds in the QLIST_FOREACH()
loop.
The right thing to do is to only delivery an asynchronous
event if the 'mon' is a QMP Monitor.
The aforementioned commit was an early version, if it was
applied to stable (it should) this one has to be applied
there too.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of using the field 'readonly' of the BlockDriverState struct for passing the request,
pass the request in the flags parameter to the function.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When using a control/QMP monitor in tandem with a regular monitor, asynchronous
messages can get lost depending on the order of the QEMU program arguments.
QEMU events issued by monitor_protocol_event() always go to cur_mon. If the
user monitor was specified on the command line first (or it has ,default), the
message will be directed to the user monitor (not the QMP monitor).
Additionally, only one QMP session is currently able to receive async messages.
To avoid this confusion, scan through the list of monitors and emit the message
on each QMP monitor.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's emitted when a VNC client session is activated by QEMU,
client's information such as port, IP and auth ID (if the
session is authenticated) are provided.
Event example:
{ "event": "VNC_INITIALIZED",
"timestamp": {"seconds": 1263475302, "microseconds": 150772},
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0"},
"client": { "family": "ipv4", "service": "46089",
"host": "127.0.0.1", "sasl_username": "lcapitulino" } } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's emitted when a VNC client connects to QEMU, client's information
such as port and IP address are provided.
Note that this event is emitted right when the connection is
established. This means that it happens before authentication
procedure and session initialization.
Event example:
{ "event": "VNC_CONNECTED",
"timestamp": { "seconds": 1262976601, "microseconds": 975795 },
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0" },
"client": { "family": "ipv4", "service": "58425",
"host": "127.0.0.1" } } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The monitor_protocol_event() function will free the
event's data, this is wrong as 'data' management is up
to the caller.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some commands return a QList of QDicts, which is valid,
but will trig the assert().
Just drop it.
Reported-by: Nathan Baum <nathan@parenthephobia.org.uk>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes do_balloon() accept megabyte values from the user
Monitor while accepting byte values for QMP.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a target long value in megabytes which should be
converted to bytes.
It will be used by handlers which accept a megabyte value
when in "user mode".
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, when a regular command doesn't have any data to output,
QMP will emit:
{ "return": "OK" }
Returning an empty dict is better though, because dicts can support
some protocol changes in a compatible way.
So, with this commit we will return:
{ "return": {} }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Looks like I dropped this check when addressing the 'query-'
commands request.
QMP should only handle converted commands, obviously.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows to suspend command interpretation and execution
synchronously, e.g. during migration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The monitor_vprintf() function now touches the 'mon' pointer
before calling monitor_puts(), this causes block migration
to segfault as its functions call monitor_printf() with a
NULL 'mon'.
To fix the problem this commit moves the 'mon' NULL check
from monitor_puts() to monitor_vprintf().
This can potentially hide bugs, but for some reason this has
been the behavior for a long time.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The monitor_read_command() function is readline specific
and should only be used when readline is available.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
do_balloon() should check for ballooning availability as
do_info_balloon() does.
Noted by Daniel P. Berrange <berrange@redhat.com>.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Monitor's eject command uses 'filename' for the device name
argument, but 'device' is a better name.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Return a QDict with server information. Connected clients are returned
as a QList of QDicts.
The new functions (vnc_qdict_remote_addr(), vnc_qdict_local_addr() and
put_addr_qdict()) are used to insert 'host' and 'service' information
in the returned QDict.
This patch is big, but I don't see how to split it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each device is represented by a QDict. The returned QObject is a QList
of all devices.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each device statistic information is stored in a QDict and
the returned QObject is a QList of all devices.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each block device information is stored in a QDict and the
returned QObject is a QList of all devices.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Return a QDict, which may contain up to more two QDicts, depending
on the type of migration we're performing.
IMPORTANT: as a QInt stores a int64_t integer, RAM values are going
to be stored as int64_t and not as uint64_t as they are today. If
this is a problem QInt will have to be changed.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each mouse is represented by a QDict, the returned QObject is a QList of
all mice.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
snprintf() is used because the UUID_FMT is too complex for
qobject_from_jsonf().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All 'info' commands should use QDict, this commit also kills
monitor_print_qobject() as do_info_version() doesn't use it
anymore (and no handler will).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While there update the documentation as well.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Should return a QDict and should not print the user protocol bits
(eg. "c|cont").
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Monitor commands should always return values in bytes and info
commands should always return a QDict.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also affects do_change(), because the two share eject_device().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The do_cont() function will ask the user to enter a password if a
device is encrypted.
This is invalid under QMP, so we raise a QERR_DEVICE_ENCRYPTED
error.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When using encrypted disk images, QEMU will prompt the user
for passwords when started.
This makes sense for the user protocol, but doesn't for QMP.
The solution is to have Monitor command which allows the user
or a Client to set passwords in advance, so that we avoid
the prompt completely.
This is what block_passwd does, for example:
(QEMU) block_passwd ide0-hd0 foobar
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We still have handlers which will call monitor print functions
in several places. Usually to report errors.
If they do this when we are in control mode, we will be emitting
garbage to our clients.
To avoid this problem, this commit adds a way to disable those
functions. If any of them is called when in control mode, we will
emit a generic error.
Although this is far from the perfect solution, it guarantees
that only JSON is sent to Clients.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Debug, shutdown, reset, powerdown and stop are all basic events,
as they are very simple they can be added in the same commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Asynchronous events are generated with a call to
monitor_protocol_event().
This function builds the right data-type and emit the event
right away. The emitted data is always a JSON object and its
format is as follows:
{ "event": json-string,
"timestamp": { "seconds": json-number, "microseconds": json-number },
"data": json-value }
This design is based on ideas by Amit Shah <amit.shah@redhat.com>.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The 'info' command makes sense for the user protocol, but for QMP
it doesn't, as its return data is not well defined. That is, it
can return anything.
To fix this Avi proposes having 'query-' commands when in protocol
mode. For example, 'info balloon' would become 'query-balloon'.
The right way of supporting this would probably be to move all
info handlers to qemu-monitor.hx, add a flags field to mon_cmd_t
to identify them and then modify do_info() to do its search based
on that flag.
Unfortunately, this would require a big change in the Monitor.
To make things simpler for now, this commit takes a different
approach: a check for commands starting with "query-" is added to
toplevel QMP code, if it's true we setup things so that do_info()
is called with the appropriate arguments.
This is a hack, but is a temporary one and guarantees that query-
commands will work from the first day.
Also note that 'info' is not allowed in protocol mode.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The JSON stream parser is used to do QMP input. When there
are enough characters to be parsed it calls Monitor's
handle_qmp_command() function to handle the input.
This function's job is to check if the input is correct and
call the appropriate handler. In other words, it does for QMP
what handle_user_command() does for the user protocol.
This means that handle_qmp_command() also has to parse the
(ugly) "args_type" format to able to get the arguments names
and types expected by the handler.
The format to input commands in QMP is as follows:
{ "execute": json-string,
"id": json-value, "arguments": json-object }
Please, note that this commit also adds "id" support.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds specific QMP checks to do_info(), so that
it behaves as expected in QMP mode.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the new Monitor output is always performed by only two
functions: do_info() and monitor_call_handler().
To support QMP output, we modify those functions to check if we
are in control mode. If so, we call monitor_protocol_emitter()
to emit QMP output, otherwise we do regular output.
QMP has two types of responses to issued commands: success and
error. The outputed data is always a JSON object.
Success responses have the following format:
{ "return": json-value, "id": json-value }
Error responses have the following format:
{ "error": { "class": json-string,
"desc": json-string,
"data": json-value } "id": json-value }
Please, note that the "id" key is part of the input code, and
thus is not added in this commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds initial QMP support in QEMU. It's important
to notice that most QMP code will be part of the Monitor.
Input will be read by monitor_control_read(). Currently it
does nothing but next patches will add proper input support.
The function monitor_json_emitter(), as its name implies, is
used by the Monitor to emit JSON output. In this commit it's
used by monitor_control_event() to print our greeting message.
Finally, control mode support is also added to monitor_init(),
allowing QMP to be really enabled.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
List QMP available commands. Only valid in control mode, where
has to be used as 'query-commands.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As this series will add a new kind of Monitor command, it's better
to rename monitor_handle_command() to what it really is:
handle_user_command().
This will avoid confusion.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit moves the loop which searches for the command
entry corresponding to a command name to its own function.
It will be used by QMP code as well.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit moves the code which calls Monitor handlers to
its own function, as it will be used by QMP code as well.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds a flag called 'control' to the '-monitor'
command-line option. This flag enables control mode.
The syntax is:
qemu [...] -monitor control,<device>
Where <device> is a chardev (excluding 'vc', for obvious reasons).
For example:
$ qemu [...] -monitor control,tcp:localhost:4444,server
Will run QEMU in control mode, waiting for a client TCP connection
on localhost port 4444.
NOTE: I've tried using QemuOpts for this, but turns out that it
will try to parse the device part, which should be untouched.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This flag will be set when Monitor enters "control mode", in
which the output will be defined by the QEMU Monitor Protocol.
This also introduces a macro to check if the flag is set.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds QError support in the Monitor.
A QError member is added to the Monitor struct. This new member
stores error information and is also used to check if an error
has occurred when the called handler returns.
Additionally, a new macro called qemu_error_new() is introduced.
It builds on top of the QemuErrorSink API and should be used in
place of qemu_error().
When all conversion to qemu_error_new() is done, qemu_error() can
be turned private.
Basically, Monitor's error flow is something like this:
1. An error occurs in the handler, it calls qemu_error_new()
2. qemu_error_new() builds a new QError object and stores it in
the Monitor struct
3. The handler returns
4. Top level Monitor code checks the Monitor struct and calls
qerror_print() to print the error
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the option to activate non-shared storage migration from the
monitor.
The migration command is as follows:
(qemu) migrate -d tcp:0:4444 # for ordinary live migration
(qemu) migrate -d -b tcp:0:4444 # for live migration with complete storage copy
(qemu) migrate -d -i tcp:0:4444 # for live migration with incremental storage copy, storage is cow based.
Changes from v4:
- Minor coding style issues.
Signed-off-by: Liran Schour <lirans@il.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have code for a quite a few block formats. While I trust that all
of these formats are useful at least for some people in some
circumstances, some of them are of a kind that friends don't let
friends use in production.
This patch provides an optional block format whitelist, default off.
If a whitelist is configured with --block-drv-whitelist, QEMU proper
can use only whitelisted formats. Other programs, like qemu-img, are
not affected.
Drivers for formats off the whitelist still participate in format
probing, to ensure all programs probe exactly the same. Without that,
QEMU proper would be prone to treat images with a format off the
whitelist as raw when the image's format is probed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that errors are not being converted yet.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that errors are not being converted yet.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that errors are not being converted yet.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that errors are not being converted yet.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that errors are not being converted yet.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The char event RESET is emitted when a char device is opened.
Give it a better name.
Patchworks-ID: 35287
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Each CPU information is stored in a QDict and the returned
QObject is a QList of all CPUs.
The QDict contains the following information:
- "CPU": cpu index
- "current": "yes" or "no"
- "pc": current PC
- "halted": "yes" or "no"
The user output in the Monitor should not change and the
future monitor protocol is expected to emit something like:
[ { "CPU": 0, "current": "yes", "pc": 0x..., "halted": "no" },
{ "CPU": 1, "current": "no", "pc": 0x..., "halted": "yes" } ]
which corresponds to the following user output:
* CPU #0: pc=0x00000000fffffff0
CPU #1: pc=0x00000000fffffff0 (halted)
Patchworks-ID: 35352
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On success return a QInt with the balloon's value.
This also introduces monitor_print_balloon() to print the
balloon information in the user protocol.
Please, note that errors are not being converted yet.
Patchworks-ID: 35351
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The returned data is always a QString.
Also introduces monitor_print_qobject(), which can be used as
a standard way to print QObjects in the user protocol format.
Patchworks-ID: 35350
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is important to note that it never fails, as big refactoring
of the virtio code would be needed to get the proper error code.
Patchworks-ID: 35349
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Appropriate error handling support will be needed to have
encrypted images working under the future machine protocol,
but this initial conversion will work with the current
user protocol.
Patchworks-ID: 35348
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
do_info() is special, its job is to call 'info handlers'.
This is similar to what monitor_handle_command() does,
therefore do_info() also has to distinguish among new and
old style info handlers.
This commit converts do_info() to the new QObject style and
makes the appropriate changes so that it can handle both
info handlers styles.
In the future, when all handlers are converted to QObject's
style, it will be possible to share more code with
monitor_handle_command().
This commit also introduces a new function called
monitor_user_noop(), it should be used by handlers which do
not have data to print.
This is the case of do_info().
Patchworks-ID: 35341
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit changes monitor_handle_command() to support old style
_and_ new style handlers.
New style handlers are protocol independent, they return their
data to the Monitor, which in turn decides how to print them
(ie. user protocol vs. machine protocol).
Converted handlers will use the 'user_print' member of 'mon_cmd_t'
to define its user protocol function, which will be called to print
data in the user protocol format.
Handlers which don't have 'user_print' defined are not converted
and are handled as usual.
Patchworks-ID: 35340
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This new struct member will store a pointer to a function that
should be used to output data in the user protocol format.
It will also serve as a flag to say if a given handler has already
been converted to the new QObject style.
Patchworks-ID: 35339
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commits adds a new union member to mon_cmd_t for command
handlers and convert monitor_handle_command() and qemu-monitor.hx
to use it.
This improves type safety.
Patchworks-ID: 35337
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit adds a union to mon_cmd_t for info handlers and
converts do_info() and info_cmds[] array to use it.
This improves type safety.
Next commit will convert command handlers.
Patchworks-ID: 35336
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds infrastructure to maintain memory regions which must be
restored on reset. That includes roms (vga bios and option roms on pc),
but is also used when loading linux kernels directly. Features:
- loading files is supported.
- passing blobs is supported.
- target address range is supported (for optionrom area).
- fixed target memory address is supported (linux kernel).
New in v2:
- writes to ROM are done only at initial boot.
- also handle aout and uimage loaders.
- drop unused fread_targphys() function.
The final memory layout is created once all memory regions are
registered. The option roms get addresses assigned and the
registered regions are checked against overlaps. Finally all data
is copyed to the guest memory.
Advantages:
(1) Filling memory on initial boot and on reset takes the same
code path, making reset more robust.
(2) The need to keep track of the option rom load address is gone.
(3) Due to (2) option roms can be loaded outside pc_init(). This
allows to move the pxe rom loading into the nic drivers for
example.
Additional bonus: There is a 'info roms' monitor command now.
The patch also switches over pc.c and removes the
option_rom_setup_reset() and load_option_rom() functions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The CPU state parameter is not used, remove it and adjust callers. Now we
can compile ioport.c once for all targets.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
make the mux driver send mux_in and mux_out events when switching
focus while hooking up more handlers.
stop using CharDriverState->focus in monitor.c, track state using
the mux events instead. This also removes the implicit assumtion
that a muxed monitor allways has mux channel 0.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The 'i' argument type is for 32-bit only and most handlers
will use an 'int' to store its value.
It's better to fail gracefully when the user enters a value
greater than 32-bit than to get subtle casting bugs.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit drops all the code used to handle the 'args[]' array,
as now we use a dictionary to pass arguments.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's not used anymore, as QDict is now used to handle string
memory allocation/deallocation.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
GET_TLONG() and GET_TPHYSADDR() are not needed anymore, QInt can
handle such conversions.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to help the integration with unit-tests and having a better
design, this commit splits monitor_handle_command() into two parts.
The parsing code is moved to a function called monitor_parse_command(),
while allocating memory and calling the handler is still done by
monitor_handle_command().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive ten arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 79c4f6b080 added handler_8 and
handler_9 handling, but there isn't any command handler with those
number of arguments.
Just drop them.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive seven arguments to
use the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive six arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive five arguments to use
the new monitor's dictionary.
Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive four arguments to use
the new monitor's dictionary.
Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive three arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive two arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive one argument to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive no arguments to use
the new monitor's dictionary.
It might seem no sense to do this, as the handlers have no arguments,
but at the end of this porting work all handlers will have the same
structure.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With this commit monitor_handle_command() will be able to setup a
QDict with arguments to command handlers.
However, the current 'args[]' method is still being used, next
changes will port commands to get their arguments from the dictionary.
Two changes are worth noting:
1. The '/' argument type always adds the following standard keys in the
dictionary: 'count', 'format' and 'size'. This way, the argument
name used in the 'args_type' string doesn't matter
2. The optional argument type '?' doesn't need to pass the additional
'has_arg' argument, hanlders can do the same check with qdict_haskey()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current handlers argument types, as defined in qemu-monitor.hx file,
are a sequence of chars where each one represents one argument type
of the command handler. The number of chars is also used to know how
many arguments a given handler accepts.
This commit defines a new format, which makes mandatory the use of
a name for each argument.
For example, do_eject() command handler is currently defined as:
{ "eject", "-fB", do_eject, ... }
With the new format it becomes:
{ "eject", "force:-f,filename:B", do_eject, ... }
This way the Monitor will be capable of setting up a dictionary, using
each argument's name as the key and the argument itself as the value.
This commit also adds two new functions: key_get_info() and
next_arg_type(), both are used to parse the new format.
Currently key_get_info() consumes the 'key' part of the new format and
discards it, this way the current parsing code is not affected by this
change.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some functions exported to be used by the Monitor as command
handlers are also called in other places as regular functions.
When those functions got ported to use the Monitor dictionary
to pass argments, the callers will have to setup a dictionary
to be able to call them.
To avoid this problem, this commit add wrappers to those functions,
so that we change the wrapper to accept the dictionary, letting
the current functions as is.
The following wrappers are being added:
- do_help_cmd()
- do_pci_device_hot_remove()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds some functions for error reporting to address the
problem that error messages should be routed to different destinations
depending on the context of the caller, i.e. monitor command errors
should go to the monitor, command line errors to stderr.
qemu_error() is a printf-like function to report errors.
qemu_errors_to_file() and qemu_errors_to_mon() switch the destination
for the error message to the specified file or monitor. When setting a
new destination the old one will be kept. One can switch back using
qemu_errors_to_previous(). i.e. it works like a stack.
main() calls qemu_errors_to_file(stderr), so errors go to stderr by
default. monitor callbacks are wrapped into qemu_errors_to_mon() +
qemu_errors_to_previous(), so any errors triggered by monitor commands
will go to the monitor.
Each thread has its own error message destination. qemu-kvm probably
should add a qemu_errors_to_file(stderr) call to the i/o-thread
initialization code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cpu_synchronize_state() is a little unreadable since the 'modified'
argument isn't self-explanatory. Simplify it by making it always
synchronize the kernel state into qemu, and automatically flush the
registers back to the kernel if they've been synchronized on this
exit.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
kqemu introduces a number of restrictions on the i386 target. The worst is that
it prevents large memory from working in the default build.
Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on
the TSC as a time source which will not be reliable on a multiple processor
system in userspace. Since most modern processors are multicore, this severely
limits the utility of kqemu.
kvm is a viable alternative for people looking to accelerate qemu and has the
benefit of being supported by the upstream Linux kernel. If someone can
implement work arounds to remove the restrictions introduced by kqemu, I'm
happy to avoid and/or revert this patch.
N.B. kqemu will still function in the 0.11 series but this patch removes it from
the 0.12 series.
Paul, please Ack or Nack this patch.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 751c6a1704 changed the monitor's
'commit' command to this behavior:
1. Any string you type as argument will cause do_commit() to
call bdrv_commit() to all devices
2. If you enter a device name, it will be the only one ignored
by do_commit() :)
The fix is to call bdrv_commit() to the specified device only and
ignore the others (when 'all' is not specified).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
First step cleaning up the drives handling. This one does nothing but
removing drives_table[], still it became seriously big.
drive_get_index() is gone and is replaced by drives_get() which hands
out DriveInfo pointers instead of a table index. This needs adaption in
*tons* of places all over.
The drives are now maintained as linked list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add monitor commands to support passing file descriptors via
SCM_RIGHTS.
getfd assigns the passed file descriptor a name for use with other
monitor commands.
closefd allows passed file descriptors to be closed. If a monitor
command actually uses a named file descriptor, closefd will not be
required.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Useful for testing hardware emulations or manipulating its state to
stress guest drivers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move registration function for the boot_set callback handler and provide
qemu_boot_set so that it can also be used outside the monitor code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- MCE features are initialized when VCPU is intialized according to CPUID.
- A monitor command "mce" is added to inject a MCE.
- A new interrupt mask: CPU_INTERRUPT_MCE is added to inject the MCE.
aliguori: fix build for linux-user
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Refactor the ACL monitor interface to make full use of the monitor
command dispatcher. This also gives proper help formatting and command
completion. Note that 'acl allow' and 'acl deny' were combined to
'acl_add aclname match allow|deny [index]' for consistency reasons.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As agreed on the mailing list, there is no interest in keeping the
usually disabled slirp statistics in the tree. So this patch removes
them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Break out sockstats from the slirp statistics and present them under the
new info category "usernet". This patch also improves the current output
/wrt proper reporting connection source and destination.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move code to extract command name into a function of its own, this
clearifies the code and let us remove two variables from
monitor_handle_command().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The 'found' goto in monitor_handle_command() can be dropped if we check
for 'cmd->name' after looking up for the command to execute.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In case you're wondering what connections exactly you have open
or maybe redir'ed in the past, you can't really find out from qemu
right now.
This patch enables you to see all current connections the host
only networking holds open, so you can kill them using the previous
patch.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Using the new host_net_redir command you can easily create redirections
on the fly while your VM is running.
While that's great, it's missing the removal of redirections, in case you
want to have a port closed again at a later point in time.
This patch adds support for removal of redirections.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is no user-flippable switch, and no arch makes use of disabling
gdbstub support. So it's pointless to keep the related #ifdefs and
configure hunks around - and risking breakages like 711c410fdd again.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Here is an updated hardware watchdog patch, which should fix
everything that was raised about the previous version ...
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
adds an "info numa" command to the monitor to output the current
topology. Since NUMA is advertised via static ACPI tables, no changes are
possible during runtime.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7211 c046a42c-6fe2-441c-8c8c-71466251a162
Allow to establish a TCP/UDP connection redirection also via a monitor
command 'host_net_redir'. Moreover, assume TCP as connection type if
that parameter is omitted.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
There is nothing x86-specific in host_net_add/remove, so allow them for
all targets.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7202 c046a42c-6fe2-441c-8c8c-71466251a162
Fix the documentation of the host_net_add monitor command and allow the
user to pass no options at all. Moreover, inform the user on the
monitor terminal if a request failed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7201 c046a42c-6fe2-441c-8c8c-71466251a162
This patch is derived from Tristan Gingold's patch. It adds a new VLAN
client type that writes all traffic on the VLAN it is attached to into a
pcap file. Such a file can then be analyzed offline with Wireshark or
tcpdump.
Besides rebasing and some minor cleanups, the major differences to the
original version are:
- support for enabling/disabling via the monitor (host_net_add/remove)
- no special ordering of VLAN client list, qemu_send_packet now takes
care of properly ordered packets
- 64k default capturing limit (I hate tcpdump's default)
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7200 c046a42c-6fe2-441c-8c8c-71466251a162
Align some monitor help texts to the related command parameter
definitions. host_net_add is skipped intentionally, will be slightly
reworked in a separate patch later.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7180 c046a42c-6fe2-441c-8c8c-71466251a162
Allows distributors to identify their builds without needing to hack the
sources.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7036 c046a42c-6fe2-441c-8c8c-71466251a162
This replaces a compile time option for some targets and adds
this feature to targets which did not have a compile time option.
Add monitor command to enable or disable single step mode.
Modify monitor command "info status" to display single step mode.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
Introduce a more canonical gdbstub configuration (system emulation only)
via the new switch '-gdb dev'. Keep '-s' as shorthand for
'-gdb tcp::1234'. Use the same syntax also for the corresponding monitor
command 'gdbserver'. Its default remains to listen on TCP port 1234.
Changes in v4:
- Rebased over new command line switches meta file
Changes in v3:
- Fix documentation
Changes in v2:
- Support for pipe-based like to gdb (target remote | qemu -gdb stdio)
- Properly update the qemu-doc
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6992 c046a42c-6fe2-441c-8c8c-71466251a162
[ Note: depends on char closing fixes ]
Properly clean up the gdbstub when the user tries to re-open it
(possibly under a different address). Moreover, allow to shut it down
from the monitor via 'gdbserver none'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6913 c046a42c-6fe2-441c-8c8c-71466251a162
Ported from the KVM tree: Synchronize the qemu cpu state with kvm's
before invoking various monitor info commands (like 'info registers').
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6826 c046a42c-6fe2-441c-8c8c-71466251a162
Allow completion of concatenated key strings for the sendkey command.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6784 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces a generic internal API for access control lists
to be used by network servers in QEMU. It adds support for checking
these ACL in the VNC server, in two places. The first ACL is for the
SASL authentication mechanism, checking the SASL username. This ACL
is called 'vnc.username'. The second is for the TLS authentication
mechanism, when x509 client certificates are turned on, checking against
the Distinguished Name of the client. This ACL is called 'vnc.x509dname'
The internal API provides for an ACL with the following characteristics
- A unique name, eg vnc.username, and vnc.x509dname.
- A default policy, allow or deny
- An ordered series of match rules, with allow or deny policy
If none of the match rules apply, then the default policy is
used.
There is a monitor API to manipulate the ACLs, which I'll describe via
examples
(qemu) acl show vnc.username
policy: allow
(qemu) acl policy vnc.username denya
acl: policy set to 'deny'
(qemu) acl allow vnc.username fred
acl: added rule at position 1
(qemu) acl allow vnc.username bob
acl: added rule at position 2
(qemu) acl allow vnc.username joe 1
acl: added rule at position 1
(qemu) acl show vnc.username
policy: deny
0: allow fred
1: allow joe
2: allow bob
(qemu) acl show vnc.x509dname
policy: allow
(qemu) acl policy vnc.x509dname deny
acl: policy set to 'deny'
(qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=*
acl: added rule at position 1
(qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob
acl: added rule at position 2
(qemu) acl show vnc.x509dname
policy: deny
0: allow C=GB,O=ACME,L=London,CN=*
1: allow C=GB,O=ACME,L=Boston,CN=bob
By default the VNC server will not use any ACLs, allowing access to
the server if the user successfully authenticates. To enable use of
ACLs to restrict user access, the ',acl' flag should be given when
starting QEMU. The initial ACL activated will be a 'deny all' policy
and should be customized using monitor commands.
eg enable SASL auth and ACLs
qemu .... -vnc localhost:1,sasl,acl
The next patch will provide a way to load a pre-defined ACL when
starting up
Makefile | 6 +
b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
b/acl.h | 74 ++++++++++++++++++++++
configure | 18 +++++
monitor.c | 95 ++++++++++++++++++++++++++++
qemu-doc.texi | 49 ++++++++++++++
vnc-auth-sasl.c | 16 +++-
vnc-auth-sasl.h | 7 ++
vnc-tls.c | 19 +++++
vnc-tls.h | 3
vnc.c | 21 ++++++
vnc.h | 3
12 files changed, 491 insertions(+), 5 deletions(-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
This allows to create monitor terminals that do not make use of the
interactive readline back-end but rather send complete commands. The
pass-through monitor interface of the gdbstub will be an example.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6717 c046a42c-6fe2-441c-8c8c-71466251a162
Up to now, you never really knew if you already switched the console
after pressing CTRL-A C or if you mistyped it again. This patch
clarifies the situation by providing a prompt in a new line and
injecting a linebreak when switching away again. For this purpose, the
two events CHR_EVENT_MUX_IN and CHR_EVENT_MUX_OUT are introduced and
distributed on focus switches.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6716 c046a42c-6fe2-441c-8c8c-71466251a162
Currently all registered (and activate) monitor terminals work in
broadcast mode: Everyone sees what someone else types on some other
terminal and what the monitor reports back. This model is broken when
you have a management monitor terminal that is automatically operated
and some other terminal used for independent guest inspection. Such
additional terminals can be multiplexed device channels or a gdb
frontend connected to QEMU's stub.
Therefore, this patch decouples the buffers and states of all monitor
terminals, allowing the user to operate them independently. It finally
starts to use the 'mon' parameter that was introduced earlier with the
API rework. It also defines the default monitor: the first instantance
that has the MONITOR_IS_DEFAULT flag set, and that is the monitor
created via the "-monitor" command line switch (or "vc" if none is
given).
As the patch requires to rework the monitor suspension interface, it
also takes the freedom to make it "truely" suspending (so far suspending
meant suppressing the prompt, but inputs were still processed).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6715 c046a42c-6fe2-441c-8c8c-71466251a162
As another step towards decoupled monitor terminals encapsulate the
state of the readline processor in a separate data structure called
ReadLineState and adapt all interfaces appropriately. For now the
monitor continues to instantiate just a single readline state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6714 c046a42c-6fe2-441c-8c8c-71466251a162
There is no use for the hide/show banner option, and it is applied
inconsistently anyway (or what makes the difference between
-serial mon:stdio and -nographic for the monitor?). So drop this mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6713 c046a42c-6fe2-441c-8c8c-71466251a162
Remove the static MAX_MON limit by managing monitor terminals in a
linked list.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6712 c046a42c-6fe2-441c-8c8c-71466251a162
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
Currently, waiting for the user to type in some password blocks the
whole VM because monitor_readline starts its own I/O loop. And this loop
also screws up reading passwords from virtual console.
Patch below fixes the shortcomings by using normal I/O processing also
for waiting on a password. To keep to modal property for the monitor
terminal, the command handler is temporarily replaced by a password
handler and a callback infrastructure is established to process the
result before switching back to command mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162
Break readline_show_prompt out of readline_start so that (re-)printing
the prompt can be controlled in a more fine-grained way.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6709 c046a42c-6fe2-441c-8c8c-71466251a162
Drop the hack to query passwords on all monitor terminals now that they
are requested when the user initially enters 'continue'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6708 c046a42c-6fe2-441c-8c8c-71466251a162
Reading the passwords for encrypted hard disks during early startup is
broken (I guess for quiet a while now):
- No monitor terminal is ready for input at this point
- Forcing all mux'ed terminals into monitor mode can confuse other
users of that channels
To overcome these issues and to lay the ground for a clean decoupling of
monitor terminals, this patch changes the initial password inquiry as
follows:
- Prevent autostart if there is some encrypted disk
- Once the user tries to resume the VM, prompt for all missing
passwords
- Only resume if all passwords were accepted
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162
Make bdrv_iterate more useful by passing the BlockDriverState to the
iterator instead of the device name.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6703 c046a42c-6fe2-441c-8c8c-71466251a162
This patch might interest some people trying (as I try to do) to fix
some tlbs for kernel/user space data sharing.
Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6670 c046a42c-6fe2-441c-8c8c-71466251a162
Add monitor command to hot-add PCI devices (nic and storage).
Syntax is:
pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params
It returns the domain, bus and slot for the newly added device on success.
It is possible to attach a disk to a device after PCI initialization via
the drive_add command. If so, a manual scan of the SCSI bus on the guest
is necessary.
Save QEMUMachine necessary for drive_init.
Add monitor command to hot-remove devices, remove device data on _EJ0 notification.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
Rearrange code, help printout and docs so that they are in the same
(hopefully more logical) order for easier maintenance.
Add help and docs for undocumented options.
Reformat slightly for more consistent help output.
Add comments to encourage better synchronization in the future.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6432 c046a42c-6fe2-441c-8c8c-71466251a162
Add a monitor command to setting a given network device's link status
to 'up' or 'down'.
Allows simulation of network cable disconnect.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6247 c046a42c-6fe2-441c-8c8c-71466251a162
Attached is a small patch that adds the new info subcommand - status.
The status indicates if the VM is running or paused this info makes
life for (stateless) Qemu/KVM frontends easier.
(Philipp Wehrheim)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6094 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds HPET emulation. It can be disabled with -disable-hpet. An hpet
provides a more finely granular clocksource than otherwise available on PC.
This means that latency-dependent applications (e.g. multimedia) will generally
be smoother when using the HPET.
Signed-off-by: Beth Kon <eak@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6081 c046a42c-6fe2-441c-8c8c-71466251a162
This allows easier use of the change vnc password monitor command from
management scripts, without having to implement expect(1)-like behaviour.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5967 c046a42c-6fe2-441c-8c8c-71466251a162
monitor_readline expects buf_size to include the terminating \0, but
do_change_vnc in monitor.c calls it as though it doesn't. The other site
where monitor_readline reads a password (in vl.c) passes the buffer
length
correctly.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5966 c046a42c-6fe2-441c-8c8c-71466251a162
This adds a VirtIO based balloon driver. It uses madvise() to actually balloon
the memory when possible.
Until 2.6.27, KVM forced memory pinning so we must disable ballooning unless the
kernel actually supports it when using KVM. It's always safe when using TCG.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5874 c046a42c-6fe2-441c-8c8c-71466251a162
Balloon devices allow you to ask the guest to allocate memory. This allows you
to release that memory. It's mostly useful for freeing up large chunks of
memory from cooperative guests.
Ballooning is supported by both Xen and VirtIO.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5873 c046a42c-6fe2-441c-8c8c-71466251a162
when compiling on NetBSD:
warning: array subscript has type 'char'
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5727 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds very basic KVM support. KVM is a kernel module for Linux that
allows userspace programs to make use of hardware virtualization support. It
current supports x86 hardware virtualization using Intel VT-x or AMD-V. It
also supports IA64 VT-i, PPC 440, and S390.
This patch only implements the bare minimum support to get a guest booting. It
has very little impact the rest of QEMU and attempts to integrate nicely with
the rest of QEMU.
Even though this implementation is basic, it is significantly faster than TCG.
Booting and shutting down a Linux guest:
w/TCG: 1:32.36 elapsed 84% CPU
w/KVM: 0:31.14 elapsed 59% CPU
Right now, KVM is disabled by default and must be explicitly enabled with
-enable-kvm. We can enable it by default later when we have had better
testing.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5627 c046a42c-6fe2-441c-8c8c-71466251a162
This patch makes qemu keep track of the character devices in use and
implements a "info chardev" monitor command to print a list.
qemu_chr_open() sticks the devices into a linked list now. It got a new
argument (label), so there is a name for each device. It also assigns a
filename to each character device. By default it just copyes the
filename passed in. Individual drivers can fill in something else
though. qemu_chr_open_pty() sets the filename to name of the pseudo tty
allocated.
Output looks like this:
(qemu) info chardev
monitor: filename=unix:/tmp/run.sh-26827/monitor,server,nowait
serial0: filename=unix:/tmp/run.sh-26827/console,server
serial1: filename=pty:/dev/pts/5
parallel0: filename=vc:640x480
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5575 c046a42c-6fe2-441c-8c8c-71466251a162
Define XER bits as a single register and access them individually to
avoid defining 5 32-bit registers (TCG doesn't permit to map 8-bit
registers).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5500 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces a command line parameter and monitor command for starting
a live migration. The next patch will provide an example of how to use these
parameters.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5476 c046a42c-6fe2-441c-8c8c-71466251a162
Live migration happens in the background, but it is useful to make the monitor
command appear as if it's blocking. This allows a management tool to
immediately know when the live migration has completed without having to poll
the migration status.
This patch allows the monitor to be suspended from a monitor callback which
will prevent new monitor commands from being executed.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5431 c046a42c-6fe2-441c-8c8c-71466251a162
If /i format is used once (with x/xp/p command) default_fmt_size is set
to -1 and subsequent commands of the form /x outputs nothing. Included
patched fixes this by setting default_fmt_size only if the command is
not of format /i.
Signed-off-by: Gleb Natapov <gleb@qumranet.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5381 c046a42c-6fe2-441c-8c8c-71466251a162
With this container_of can actually be used without causing build errors.
Reformat container_of.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5234 c046a42c-6fe2-441c-8c8c-71466251a162
Instead of dumping incorrect (ie. previously read) data, report the
invalid virtual address to the user.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5023 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows to display the "Password:" prompt if we use encrypted
disk with "-nographic" option.
It also modifies management of "-nographic" to not override user's
choices for "-serial", "-parallel" and "-monitor".
When qemu has to ask a password with "-nographic" with a multiplexed
serial interface, it forces the focus to the monitor and restore
original focus after.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4979 c046a42c-6fe2-441c-8c8c-71466251a162
This patch repairs the management of encrypted disk images and allows to
enter the password.
Changelog:
v2:
- move read_password() before do_loadvm()
- really start monitor if output is stdio.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4976 c046a42c-6fe2-441c-8c8c-71466251a162
Current key injection via the monitor basically generates no key hold
time. This is fine for keyboard emulations that have their own queues,
but it causes troubles for those how don't (like the MusicPal - it
simply does not work with injected keys). Moreover, I would like to use
this mechanism to simulate pressed buttons during power-up.
Therefore, this patch enhances the key injection with a configurable
release delay (by default 100 virtual milliseconds).
This feature allows to get rid of the initial sleep() in musicpal_init
because one can now simply start qemu with -S and issue "sendkey m 1000"
and "continue" in the monitor to achieve the desired effect of a pressed
menu button during power-up. So there is no need for a per-musicpal or
even qemu-wide "-hold-button" switch.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4701 c046a42c-6fe2-441c-8c8c-71466251a162
Adding sysrq keycode to the table enabling running sysrq debugging in
the guest via the monitor sendkey command, like:
(qemu) sendkey alt-sysrq-t
Tested on x86-64 target and Linux guest.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4658 c046a42c-6fe2-441c-8c8c-71466251a162
Looking at the sendkey implementation, planning to enhance it with a
hold time argument, I found some potential out-of-bound access and not
very readable code. Here is a fix for the former and a (subjective)
improvement of the latter.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4657 c046a42c-6fe2-441c-8c8c-71466251a162
routines. Coming back to a raw MSR storage model then speed-up the emulation.
Improve fast MSR updates (wrtee wrteei and mtriee cases).
Share rfi family instructions helpers code to avoid bug in duplicated code.
Allow entering halt mode as the result of a rfi instruction.
Add a new helper_regs.h file to avoid duplication of special registers
manipulation routines (currently XER and MSR).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3436 c046a42c-6fe2-441c-8c8c-71466251a162
Avoid duplicating code and, as a side effect, fix missing bits in MSR.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3191 c046a42c-6fe2-441c-8c8c-71466251a162
- Add status file to make regression tracking easier
- Move all micro-operations helpers definitions into a separate header:
should never be seen outside of op.c
- Update copyrights
- Add new / missing PowerPC CPU definitions
- Add definitions for PowerPC BookE
- Add support for PowerPC 6xx/7xx software driven TLBs
Allow use of PowerPC 603 as an example
- Add preliminary code for POWER, POWER2, PowerPC 403, 405, 440, 601, 602
and BookE support
- Avoid compiling priviledged only resources support for user-mode emulation
- Remove unused helpers / micro-ops / dead code
- Add instructions usage statistics dump: useful to figure which instructions
need strong optimizations.
- Micro-operation fixes:
* add missing RETURN in some micro-ops
* fix prototypes
* use softfloat routines for all floating-point operations
* fix tlbie instruction
* move some huge micro-operations into helpers
- emulation fixes:
* fix inverted opcodes for fcmpo / fcmpu
* condition register update is always to be done after the whole
instruction has completed
* add missing NIP updates when calling helpers that may generate an
exception
- optimizations and improvments:
* optimize very often used instructions (li, mr, rlwixx...)
* remove specific micro-ops for rarely used instructions
* add routines for addresses computations to avoid bugs due to multiple
different implementations
* fix TB linking: do not reset T0 at the end of every TB.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2473 c046a42c-6fe2-441c-8c8c-71466251a162
