Modify all .log_global_start() handlers to take an Error** parameter
and return a bool. Adapt memory_global_dirty_log_start() to interrupt
on the first error the loop on handlers. In such case, a rollback is
performed to stop dirty logging on all listeners where it was
previously enabled.
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240320064911.545001-10-clg@redhat.com
[peterx: modify & enrich the comment for listener_add_address_space() ]
Signed-off-by: Peter Xu <peterx@redhat.com>
When memory page is converted from private to shared, the original
private memory is back'ed by guest_memfd. Introduce
ram_block_discard_guest_memfd_range() for discarding memory in
guest_memfd.
Based on a patch by Isaku Yamahata <isaku.yamahata@intel.com>.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240320083945.991426-12-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some subsystems like VFIO might disable ram block discard, but guest_memfd
uses discard operations to implement conversions between private and
shared memory. Because of this, sequences like the following can result
in stale IOMMU mappings:
1. allocate shared page
2. convert page shared->private
3. discard shared page
4. convert page private->shared
5. allocate shared page
6. issue DMA operations against that shared page
This is not a use-after-free, because after step 3 VFIO is still pinning
the page. However, DMA operations in step 6 will hit the old mapping
that was allocated in step 1.
Address this by taking ram_block_discard_is_enabled() into account when
deciding whether or not to discard pages.
Since kvm_convert_memory()/guest_memfd doesn't implement a
RamDiscardManager handler to convey and replay discard operations,
this is a case of uncoordinated discard, which is blocked/released
by ram_block_discard_require(). Interestingly, this function had
no use so far.
Alternative approaches would be to block discard of shared pages, but
this would cause guests to consume twice the memory if they use VFIO;
or to implement a RamDiscardManager and only block uncoordinated
discard, i.e. use ram_block_coordinated_discard_require().
[Commit message mostly by Michael Roth <michael.roth@amd.com>]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add KVM guest_memfd support to RAMBlock so both normal hva based memory
and kvm guest memfd based private memory can be associated in one RAMBlock.
Introduce new flag RAM_GUEST_MEMFD. When it's set, it calls KVM ioctl to
create private guest_memfd during RAMBlock setup.
Allocating a new RAM_GUEST_MEMFD flag to instruct the setup of guest memfd
is more flexible and extensible than simply relying on the VM type because
in the future we may have the case that not all the memory of a VM need
guest memfd. As a benefit, it also avoid getting MachineState in memory
subsystem.
Note, RAM_GUEST_MEMFD is supposed to be set for memory backends of
confidential guests, such as TDX VM. How and when to set it for memory
backends will be implemented in the following patches.
Introduce memory_region_has_guest_memfd() to query if the MemoryRegion has
KVM guest_memfd allocated.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240320083945.991426-7-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, the system reset is concluded by a call to
cpu_synchronize_all_post_reset() in order to sync any changes
that the machine reset callback applied to the CPU state.
However, for VMs with encrypted state such as SEV-ES guests (currently
the only case of guests with non-resettable CPUs) this cannot be done,
because guest state has already been finalized by machine-init-done notifiers.
cpu_synchronize_all_post_reset() does nothing on these guests, and actually
we would like to make it fail if called once guest has been encrypted.
So, assume that boards that support non-resettable CPUs do not touch
CPU state and that all such setup is done before, at the time of
cpu_synchronize_all_post_init().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This "hotpluggable" here is misleading. Actually we check is object a
device or not. Let's drop the word.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240329183758.3360733-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When something tries to run one of the spawn syscalls (eg clone),
our seccomp deny filter is set to cause a fatal trap which kills
the process.
This is found to be unhelpful when QEMU has loaded the nvidia
GL library. This tries to spawn a process to modprobe the nvidia
kmod. This is a dubious thing to do, but at the same time, the
code will gracefully continue if this fails. Our seccomp filter
rightly blocks the spawning, but prevent the graceful continue.
Switching to reporting EPERM will make QEMU behave more gracefully
without impacting the level of protect we have.
https://gitlab.com/qemu-project/qemu/-/issues/2116
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240219061731.232570-1-npiggin@gmail.com>
[PMD: Split patch in 2: part 1/2]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240312201458.79532-3-philmd@linaro.org
Signed-off-by: Peter Xu <peterx@redhat.com>
In order to call tlb_reset_dirty_range_all() outside of
system/physmem.c, expose its prototype.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240312201458.79532-2-philmd@linaro.org
Signed-off-by: Peter Xu <peterx@redhat.com>
A small number of migration options are accessed by migration clients,
but to see them clients must include all of options.h, which is mostly
for migration core code. migrate_mode() in particular will be needed by
multiple clients.
Refactor the option declarations so clients can see the necessary few via
misc.h, which already exports a portion of the client API.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Link: https://lore.kernel.org/r/1710179319-294320-1-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
If the access is bigger than the MemoryRegion supports,
flatview_read/write_continue() will attempt to update the Memory Region.
but the address passed to flatview_translate() is relative to the cache, not
to the FlatView.
On arm/virt with interleaved CXL memory emulation and virtio-blk-pci this
lead to the first part of descriptor being read from the CXL memory and the
second part from PA 0x8 which happens to be a blank region
of a flash chip and all ffs on this particular configuration.
Note this test requires the out of tree ARM support for CXL, but
the problem is more general.
Avoid this by adding new address_space_read_continue_cached()
and address_space_write_continue_cached() which share all the logic
with the flatview versions except for the MemoryRegion lookup which
is unnecessary as the MemoryRegionCache only covers one MemoryRegion.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240307153710.30907-5-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This code will be reused for the address_space_cached accessors
shortly.
Also reduce scope of result variable now we aren't directly
calling this in the loop.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240307153710.30907-4-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Precursor to factoring out the inner loops for reuse.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20240307153710.30907-3-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The calls to flatview_read/write[_continue]() have parameters addr and
addr1 but the names give no indication of what they are addresses of.
Rename addr1 to mr_addr to reflect that it is the translated address
offset within the MemoryRegion returned by flatview_translate().
Similarly rename the parameter in address_space_read/write_cached_slow()
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20240307153710.30907-2-Jonathan.Cameron@huawei.com
Signed-off-by: Peter Xu <peterx@redhat.com>
The output of info qtree monitor command is very long. Add an option
to print a brief overview omitting all the details.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-ID: <20240307183812.0105D4E6004@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
physmem.c doesn't use any declaration from "hw/xen/xen.h",
it only requires "sysemu/xen.h" and "system/xen-mapcache.h".
Suggested-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20231114143816.71079-5-philmd@linaro.org>
Improve
Record/replay feature is not supported for '-rtc base=localtime'
Record/replay feature is not supported for 'smp'
Record/replay feature is not supported for '-snapshot'
to
Record/replay is not supported with -rtc base=localtime
Record/replay is not supported with multiple CPUs
Record/replay is not supported with -snapshot
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Original goal of addition of drain_call_rcu to qmp_device_add was to cover
the failure case of qdev_device_add. It seems call of drain_call_rcu was
misplaced in 7bed89958b what led to waiting for pending RCU callbacks
under happy path too. What led to overall performance degradation of
qmp_device_add.
In this patch call of drain_call_rcu moved under handling of failure of
qdev_device_add.
Signed-off-by: Dmitrii Gavrilov <ds-gavr@yandex-team.ru>
Message-ID: <20231103105602.90475-1-ds-gavr@yandex-team.ru>
Fixes: 7bed89958b ("device_core: use drain_call_rcu in in qmp_device_add", 2020-10-12)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qemu_host_page_{size,mask} and HOST_PAGE_ALIGN into bsd-user.
It should be removed from bsd-user as well, but defer that cleanup.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-28-richard.henderson@linaro.org>
Align allocation sizes to the maximum of host and target page sizes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-15-richard.henderson@linaro.org>
Add a fd-bootchk property to PC machine types, so that -no-fd-bootchk
returns an error if the machine does not support booting from floppies
and checking for boot signatures therein.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the qemu_register_reset() API permits the reset handler functions
registered with it to remove themselves from within the callback function.
This is fine with our current implementation, but is a bit odd, because
generally reset is supposed to be idempotent, and doesn't fit well in a
three-phase-reset world where a resettable object will get multiple
callbacks as the system is reset.
We now have only one user of qemu_register_reset() which makes use of
the ability to unregister itself within the callback:
restore_boot_order(). We want to change our implementation of
qemu_register_reset() to something where it would be awkward to
maintain the "can self-unregister" feature. Rather than making that
reimplementation complicated, change restore_boot_order() so that it
doesn't unregister itself but instead returns doing nothing for any
calls after it has done the "restore the boot order" work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240220160622.114437-4-peter.maydell@linaro.org
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Input grab key should be Ctrl-Alt-g, not just Ctrl-Alt.
Fixes: f8d2c9369b ("sdl: use ctrl-alt-g as grab hotkey")
Signed-off-by: Tianlan Zhou <bobby825@126.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Arguments `ram_block` are reassigned to local declarations `block`
without further use. Remove re-assignment to reduce noise.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use __func__ to avoid hard-coded function name.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240125023328.2520888-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
/dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
+Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
=K4b1
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups, fixes
vhost-user-snd support
x2APIC mode with TCG support
CXL update to r3.1
fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK
# w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+
# /dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna
# mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek
# +Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK
# zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc=
# =K4b1
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Feb 2024 11:18:13 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (60 commits)
MAINTAINERS: Switch to my Enfabrica email
virtio-gpu-rutabaga.c: override resource_destroy method
virtio-gpu.c: add resource_destroy class method
hw/display/virtio-gpu.c: use reset_bh class method
hw/smbios: Fix port connector option validation
hw/smbios: Fix OEM strings table option validation
virtio-gpu: Correct virgl_renderer_resource_get_info() error check
hw/cxl: Standardize all references on CXL r3.1 and minor updates
hw/cxl: Update mailbox status registers.
hw/cxl: Update RAS Capability Definitions for version 3.
hw/cxl: Update link register definitions.
hw/cxl: Update HDM Decoder capability to version 3
tests/acpi: Update DSDT.cxl to reflect change _STA return value.
hw/i386: Fix _STA return value for ACPI0017
tests/acpi: Allow update of DSDT.cxl
hw/mem/cxl_type3: Fix potential divide by zero reported by coverity
hw/cxl: Pass NULL for a NULL MemoryRegionOps
hw/cxl: Pass CXLComponentState to cache_mem_ops
hw/cxl/device: read from register values in mdev_reg_read()
hw/cxl/mbox: Remove dead code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some SuperI/O devices such as the VIA south bridges or the PC87312 controller
allow to enable or disable their SuperI/O functions. Add a convenience function
for implementing this in the VIA south bridges.
The naming of the functions is inspired by its memory_region_set_enabled()
pendant.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some SuperI/O devices such as the VIA south bridges or the PC87312 controller
are able to relocate their SuperI/O functions. Add a convenience function for
implementing this in the VIA south bridges.
This convenience function relies on previous simplifications in exec/ioport
which avoids some duplicate synchronization of I/O port base addresses. The
naming of the function is inspired by its memory_region_set_address() pendant.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
portio_list_add_1() creates a MemoryRegionPortioList instance which holds a
MemoryRegion `mr` and an array of MemoryRegionPortio elements named `ports`.
Each element in the array gets assigned the same value for its .base attribute.
The same value also ends up as the .addr attribute of `mr` due to the
memory_region_add_subregion() call. This means that all .base attributes are
the same as `mr.addr`.
The only usages of MemoryRegionPortio::base were in portio_read() and
portio_write(). Both functions get above MemoryRegionPortioList as their
opaque parameter. In both cases find_portio() can only return one of the
MemoryRegionPortio elements of the `ports` array. Due to above observation any
element will have the same .base value equal to `mr.addr` which is also
accessible.
Hence, `mrpio->mr.addr` is equivalent to `mrp->base` and
MemoryRegionPortio::base is redundant and can be removed.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20240114123911.4877-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This file is only used by system/physmem.c so move them together.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For a long time now, libvirt has pre-created the monitor connection
socket and passed the pre-opened FD into QEMU during startup. Thus
libvirt does not have any timeouts waiting for the monitor socket
to appear, it is immediately connected.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many configurations, e.g. multiple vNICs with multiple queues or
with many Ceph OSDs, the default soft limit of 1024 is not enough.
QEMU is supposed to work fine with file descriptors >= 1024 and does
not use select() on POSIX. Bump the soft limit to the allowed hard
limit to avoid issues with the aforementioned configurations.
Of course the limit could be raised from the outside, but the man page
of systemd.exec states about 'LimitNOFILE=':
> Don't use.
> [...]
> Typically applications should increase their soft limit to the hard
> limit on their own, if they are OK with working with file
> descriptors above 1023,
If the soft limit is already the same as the hard limit, avoid the
superfluous setrlimit call. This can avoid a warning with a strict
seccomp filter blocking setrlimit if NOFILE was already raised before
executing QEMU.
Buglink: https://bugzilla.proxmox.com/show_bug.cgi?id=4507
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU initializes preallocated backend memory as the objects are parsed from
the command line. This is not optimal in some cases (e.g. memory spanning
multiple NUMA nodes) because the memory objects are initialized in series.
Allow the initialization to occur in parallel (asynchronously). In order to
ensure optimal thread placement, asynchronous initialization requires prealloc
context threads to be in use.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Also remove the stale declaration of host_net_devices; the actual
definition was removed long ago in commit 7cc28cb061 ("net: Remove
the deprecated 'host_net_add' and 'host_net_remove' HMP commands")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Currently if the user passes multiple -serial options on the command
line, we mostly treat those as applying to the different serial
devices in order, so that for example
-serial stdio -serial file:filename
will connect the first serial port to stdio and the second to the
named file.
The exception to this is the '-serial none' serial device type. This
means "don't allocate this serial device", but a bug means that
following -serial options are not correctly handled, so that
-serial none -serial stdio
has the unexpected effect that stdio is connected to the first serial
port, not the second.
This is a very long-standing bug that dates back at least as far as
commit 998bbd74b9 from 2009.
Make the 'none' serial type move forward in the indexing of serial
devices like all the other serial types, so that any subsequent
-serial options are correctly handled.
Note that if your commandline mistakenly had a '-serial none' that
was being overridden by a following '-serial something' option, you
should delete the unnecessary '-serial none'. This will give you the
same behaviour as before, on QEMU versions both with and without this
bug fix.
Cc: qemu-stable@nongnu.org
Reported-by: Bohdan Kostiv <bohdan.kostiv@tii.ae>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240122163607.459769-2-peter.maydell@linaro.org
Fixes: 998bbd74b9 ("default devices: core code & serial lines")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tcg/ should not depend on accel/tcg/, but perf and debuginfo
support provided by the latter are being used by tcg/tcg.c.
Since that's the only user, move both to tcg/.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231212003837.64090-5-iii@linux.ibm.com>
Message-Id: <20240125054631.78867-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently qemu_target_page_mask() is usable only from the softmmu
code. Make it possible to use it from the *-user code as well.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20231208003754.3688038-2-iii@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240124075609.14756-2-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[rth: Split out change to accel/tcg/perf.c]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Keep system/watchpoint.c accelerator-agnostic by moving
TCG specific code to accel/tcg/watchpoint.c. Update meson.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240111162032.43378-1-philmd@linaro.org>
Rather than having to lookup for what the 0, 1, 2, ...
icount values are, use a enum definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231208113529.74067-4-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have icount_configure()
return a boolean indicating whether an error is set or not.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-2-philmd@linaro.org>
This option has been deprecated before the 8.1 release,
in commit 12fd0f41d0 ("Document that -singlestep command
line option is deprecated"). Time to drop it.
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This member has been deprecated before the 8.1 release, in commit
34c18203d4 ("qmp: Deprecate 'singlestep' member of StatusInfo").
Time to drop it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's been marked as deprecated since QEMU 8.1, so it should be fine
to remove this now.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240118103759.130748-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's been marked as deprecated since QEMU 8.1 (and was only available
since QEMU 8.0 anyway), so it should be fine to remove this now.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240118103759.130748-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's been marked as deprecated since QEMU 8.0, so it should be fine
to remove this now.
Message-ID: <20240118103759.130748-3-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's been marked as deprecated since QEMU 8.0, so it should be fine
to remove this now.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240118103759.130748-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The term "iothread lock" is obsolete. The APIs use Big QEMU Lock (BQL)
in their names. Update the code comments to use "BQL" instead of
"iothread lock".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20240102153529.486531-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL)
instead, it is already widely used and unambiguous.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Unify CPU QOM type checks (Gavin)
- Simplify uses of some CPU related property (Philippe)
(start-powered-off, ARM reset-cbar and mp-affinity)
- Header and documentation cleanups (Zhao, Philippe)
- Have Memory API return boolean indicating possible error
- Fix frame filter mask in CAN sja1000 model (Pavel)
- QOM embed MCF5206 timer into SoC (Thomas)
- Simplify LEON3 qemu_irq_ack handler (Clément)
-----BEGIN PGP SIGNATURE-----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=an4B
-----END PGP SIGNATURE-----
Merge tag 'hw-cpus-20240105' of https://github.com/philmd/qemu into staging
HW core patch queue
- Unify CPU QOM type checks (Gavin)
- Simplify uses of some CPU related property (Philippe)
(start-powered-off, ARM reset-cbar and mp-affinity)
- Header and documentation cleanups (Zhao, Philippe)
- Have Memory API return boolean indicating possible error
- Fix frame filter mask in CAN sja1000 model (Pavel)
- QOM embed MCF5206 timer into SoC (Thomas)
- Simplify LEON3 qemu_irq_ack handler (Clément)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmWYIxwACgkQ4+MsLN6t
# wN66fA//UBwgYqcdpg6Wz17qzgq1TWeZHHzYh7HbZRUCxhdSgS6TSQOH9Fi8VNYq
# Ed5a5l4ovP/2NRN1/S5PPBydyKXTU7wintHm2+suQbLSmplIE6yr0Ca6o8FLEeJ3
# hnE0dAoQCLS7eDpoeOEpGjzmJFiBSWLvyqAZLa/rZkCnCiZRHB6g/nAEM8I3I9bl
# //H20d3a/fektZxGnpEAeoMxrl4iA9hkFYVW8lbu6EhNFBPUkkj5Y8w47Kq/BIvD
# NmLTPgu4d7oahwlfsM6jWdRDG9zlEkXQor817PHwl00o45yAfeITsy40GvJeEYaI
# BcDLFfWrSm9SQb7/suXGeyU/SLmx7rsmJWfNYUoMr6807QcSH4ScPCfgzEQ4j8IV
# PmeVsxxLxT9CSzfxhMx5cXt33H2l+tEzwJ5UJCLQvmvTu+aDkt46Q09X/7j0z89m
# zSk/HBtdACIzwEWBAJsKuzarRTZNUvyXEsOxZ5l7xOxJpzpsNV2YVuChClVGtHOJ
# kr1PE2hxEMPY1vDyKU6ckDvW+XXgYhOXrPAxdx8gIwwd4oyDC5vVlIajvlqbOAsp
# Es7zq40b/is3ZnByEDbZ+yYvdYRLtVf/lDPK3KIv7IhrTNzH/HT1egshOQAVirY1
# Gw8f3fXqL3/84w383VI4efrSlKBJeb0i2SJ50y2N1clrF1qnlx0=
# =an4B
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 05 Jan 2024 15:41:16 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-cpus-20240105' of https://github.com/philmd/qemu: (71 commits)
target/sparc: Simplify qemu_irq_ack
hw/net/can/sja1000: fix bug for single acceptance filter and standard frame
hw/m68k/mcf5206: Embed m5206_timer_state in m5206_mbar_state
hw/pci-host/raven: Propagate error in raven_realize()
hw/nvram: Simplify memory_region_init_rom_device() calls
hw/misc: Simplify memory_region_init_ram_from_fd() calls
hw/sparc: Simplify memory_region_init_ram_nomigrate() calls
hw/arm: Simplify memory_region_init_rom() calls
hw: Simplify memory_region_init_ram() calls
misc: Simplify qemu_prealloc_mem() calls
util/oslib: Have qemu_prealloc_mem() handler return a boolean
backends: Reduce variable scope in host_memory_backend_memory_complete
backends: Have HostMemoryBackendClass::alloc() handler return a boolean
backends: Simplify host_memory_backend_memory_complete()
backends: Use g_autofree in HostMemoryBackendClass::alloc() handlers
memory: Have memory_region_init_ram_from_fd() handler return a boolean
memory: Have memory_region_init_ram_from_file() handler return a boolean
memory: Have memory_region_init_resizeable_ram() return a boolean
memory: Have memory_region_init_rom_device() handler return a boolean
memory: Simplify memory_region_init_rom_device_nomigrate() calls
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have memory_region_init_ram_from_fd
return a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-14-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have memory_region_init_ram_from_file
return a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-13-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have memory_region_init_resizeable_ram
return a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-12-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have memory_region_init_rom_device
return a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-11-philmd@linaro.org>
Following the example documented since commit e3fe3988d7
("error: Document Error API usage rules"), have
memory_region_init_rom_device_nomigrate() return a boolean
indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-9-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have memory_region_init_rom()
return a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-8-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have memory_region_init_ram()
return a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-7-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have memory_region_init_rom_nomigrate
return a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-4-philmd@linaro.org>
[PMD: Only update 'readonly' field on success (Manos Pitsidianakis)]
Message-Id: <af352e7d-3346-4705-be77-6eed86858d18@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have memory_region_init_ram_nomigrate
return a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-3-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have memory_region_init_ram_nomigrate
return a boolean indicating whether an error is set or not.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20231120213301.24349-2-philmd@linaro.org>
Add a helper to return a machine default CPU type.
If this machine is restricted to a single CPU type,
use it as default, obviously.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231116163726.28952-1-philmd@linaro.org>
- We lost Juan and Leo in the maintainers file
- Steven's suspend state fix
- Steven's fix for coverity on migrate_mode
- Avihai's migration cleanup series
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZZY0TxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbSxgEAoM5g3wkc22lpAlRpU+hJUqT9NVOVQSK+
Fk7XJYTdSgABAKzykA6hAmU5Kj+yVI6jI874SVZbs2FWpFs4osvsKk4D
=sfuM
-----END PGP SIGNATURE-----
Merge tag 'migration-20240104-pull-request' of https://gitlab.com/peterx/qemu into staging
migration 1st pull for 9.0
- We lost Juan and Leo in the maintainers file
- Steven's suspend state fix
- Steven's fix for coverity on migrate_mode
- Avihai's migration cleanup series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZZY0TxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbSxgEAoM5g3wkc22lpAlRpU+hJUqT9NVOVQSK+
# Fk7XJYTdSgABAKzykA6hAmU5Kj+yVI6jI874SVZbs2FWpFs4osvsKk4D
# =sfuM
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 04 Jan 2024 04:30:07 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240104-pull-request' of https://gitlab.com/peterx/qemu: (26 commits)
migration: fix coverity migrate_mode finding
migration/multifd: Remove unnecessary usage of local Error
migration: Remove unnecessary usage of local Error
migration: Fix migration_channel_read_peek() error path
migration/multifd: Remove error_setg() in migration_ioc_process_incoming()
migration/multifd: Fix leaking of Error in TLS error flow
migration/multifd: Simplify multifd_channel_connect() if else statement
migration/multifd: Fix error message in multifd_recv_initial_packet()
migration: Remove errp parameter in migration_fd_process_incoming()
migration: Refactor migration_incoming_setup()
migration: Remove nulling of hostname in migrate_init()
migration: Remove migrate_max_downtime() declaration
tests/qtest: postcopy migration with suspend
tests/qtest: precopy migration with suspend
tests/qtest: option to suspend during migration
tests/qtest: migration events
migration: preserve suspended for bg_migration
migration: preserve suspended for snapshot
migration: preserve suspended runstate
migration: propagate suspended runstate
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not wake a suspended guest during bg_migration, and restore the prior
state at finish rather than unconditionally running. Allow the additional
state transitions that occur.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-9-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Restoring a snapshot can break a suspended guest. Snapshots suffer from
the same suspended-state issues that affect live migration, plus they must
handle an additional problematic scenario, which is that a running vm must
remain running if it loads a suspended snapshot.
To save, the existing vm_stop call now completely stops the suspended
state. Finish with vm_resume to leave the vm in the state it had prior
to the save, correctly restoring the suspended state.
To load, if the snapshot is not suspended, then vm_stop + vm_resume
correctly handles all states, and leaves the vm in the state it had prior
to the load. However, if the snapshot is suspended, restoration is
trickier. First, call vm_resume to restore the state to suspended so the
current state matches the saved state. Then, if the pre-load state is
running, call wakeup to resume running.
Prior to these changes, the vm_stop to RUN_STATE_SAVE_VM and
RUN_STATE_RESTORE_VM did not change runstate if the current state was
suspended, but now it does, so allow these transitions.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-8-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Currently, a vm in the suspended state is not completely stopped. The VCPUs
have been paused, but the cpu clock still runs, and runstate notifiers for
the transition to stopped have not been called. This causes problems for
live migration. Stale cpu timers_state is saved to the migration stream,
causing time errors in the guest when it wakes from suspend, and state that
would have been modified by runstate notifiers is wrong.
Modify vm_stop to completely stop the vm if the current state is suspended,
transition to RUN_STATE_PAUSED, and remember that the machine was suspended.
Modify vm_start to restore the suspended state.
This affects all callers of vm_stop and vm_start, notably, the qapi stop and
cont commands:
old behavior:
RUN_STATE_SUSPENDED --> stop --> RUN_STATE_SUSPENDED
new behavior:
RUN_STATE_SUSPENDED --> stop --> RUN_STATE_PAUSED
RUN_STATE_PAUSED --> cont --> RUN_STATE_SUSPENDED
For example:
(qemu) info status
VM status: paused (suspended)
(qemu) stop
(qemu) info status
VM status: paused
(qemu) system_wakeup
Error: Unable to wake up: guest is not in suspended state
(qemu) cont
(qemu) info status
VM status: paused (suspended)
(qemu) system_wakeup
(qemu) info status
VM status: running
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-68-richard.henderson@linaro.org>
Since the removal of AioContext locking, the correctness of the code
relies on running requests from a single AioContext at any given time.
Add assertions that verify that callbacks are invoked in the correct
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231205182011.1976568-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit abfcd2760b ("dma-helpers: prevent dma_blk_cb() vs
dma_aio_cancel() race") acquired the AioContext lock inside dma_blk_cb()
to avoid a race with scsi_device_purge_requests() running in the main
loop thread.
The SCSI code no longer calls dma_aio_cancel() from the main loop thread
while I/O is running in the IOThread AioContext. Therefore it is no
longer necessary to take this lock to protect DMAAIOCB fields. The
->cb() function also does not require the lock because blk_aio_*() and
friends do not need the AioContext lock.
Both hw/ide/core.c and hw/ide/macio.c also call dma_blk_io() but don't
rely on it taking the AioContext lock, so this change is safe.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231204164259.1515217-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, the conflict between -incoming and -loadvm is only detected
when loading the snapshot fails because the image is still inactive for
the incoming migration. This results in a suboptimal error message:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: Device 'ide0-hd0' is writable but does not support snapshots
Catch the situation already in qemu_validate_options() to improve the
message:
$ ./qemu-system-x86_64 -hda /tmp/test.qcow2 -loadvm foo -incoming defer
qemu-system-x86_64: 'incoming' and 'loadvm' options are mutually exclusive
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231201142520.32255-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"hw/core/cpu.h" declares 'first_cpu'. Include it to avoid
when unrelated headers are refactored:
system/qtest.c:548:33: error: use of undeclared identifier 'first_cpu'
address_space_write(first_cpu->as, addr, MEMTXATTRS_UNSPECIFIED,
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231212113016.29808-2-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using direct pointer dereferencing can allow for unaligned accesses,
which was seen during execution with sanitizers enabled.
Cc: qemu-stable@nongnu.org
Reviewed-by: Chris Rauer <crauer@google.com>
Reviewed-by: Peter Foley <pefoley@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231116163633.276671-1-venture@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
If an unexpected error condition happens, we have to abort
(&fatal_error is meant for expected errors).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231120133112.82447-1-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unfortunately Coverity doesn't follow the logic aroung "len" and "l"
variables in stacks finishing with flatview_{read,write}_continue() and
generate a lot of OVERRUN false-positives. When small buffer (2 or 4
bytes) is passed to mem read/write path, Coverity assumes the worst
case of sz=8 in stn_he_p()/ldn_he_p() (defined in
include/qemu/bswap.h), and reports buffer overrun.
To silence these false-positives we have model functions, which hide
real logic from Coverity.
However, it turned out that these new two assertions are enough to
quiet Coverity.
Assertions are better than hiding the logic, so let's drop the
modelling and move to assertions for memory r/w call stacks.
After patch, the sequence
cov-make-library --output-file /tmp/master.xmldb \
scripts/coverity-scan/model.c
cov-build --dir ~/covtmp/master make -j9
cov-analyze --user-model-file /tmp/master.xmldb \
--dir ~/covtmp/master --all --strip-path "$(pwd)
cov-format-errors --dir ~/covtmp/master \
--html-output ~/covtmp/master_html_report
Generate for me the same big set of CIDs excepept for 6 disappeared (so
it becomes even better).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231005140326.332830-1-vsementsov@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a Xen console is configured on the command line, do not add a default
serial port.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
We should also consider -display vnc= as setting up a remote display,
and not attempt to add another default one.
The display_remote++ in qemu_setup_display() isn't necessary at this
point, but is there for completeness and further usages of the variable.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1988
Fixes: commit 484629fc81 ("vl: simplify display_remote logic ")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit 1bec1cc0d ("ui/console: allow to override the default VC") changed
the behaviour of the "-display none" option, so that it now creates a
QEMU monitor on the terminal. "-display none" should not be tangled up
with whether we create a monitor or a serial terminal; it should purely
and only disable the graphical window. Changing its behaviour like this
breaks command lines which, for example, use semihosting for their
output and don't want a graphical window, as they now get a monitor they
never asked for.
It also breaks the command line we document for Xen in
docs/system/i386/xen.html:
$ ./qemu-system-x86_64 --accel kvm,xen-version=0x40011,kernel-irqchip=split \
-display none -chardev stdio,mux=on,id=char0,signal=off -mon char0 \
-device xen-console,chardev=char0 -drive file=${GUEST_IMAGE},if=xen
qemu-system-x86_64: cannot use stdio by multiple character devices
qemu-system-x86_64: could not connect serial device to character backend
'stdio'
When qemu is compiled without PIXMAN, by default the serials aren't
muxed with the monitor anymore on stdio. The serials are redirected to
"null" instead, and the monitor isn't set up.
Fixes: commit 1bec1cc0d ("ui/console: allow to override the default VC")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
The error message
{"execute": "balloon", "arguments":{"value": -1}}
{"error": {"class": "GenericError", "desc": "Parameter 'target' expects a size"}}
points to 'target' instead of 'value'. Fix:
{"error": {"class": "GenericError", "desc": "Parameter 'value' expects a size"}}
Root cause: qmp_balloon()'s parameter is named @target. Rename it to
@value to match the QAPI schema.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-7-armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
