This patch fills the DriveInfo->unit after hotplugging a scsi disk.
It makes a difference when auto-assigning a scsi id, where unit was
left filled with '-1' instead of the actual scsi id.
With this patch applied the the drive naming logic in drive_init() works
as good as it did in previous releases. Which means it works fine with
a single scsi bus.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current PCI code will simply hw_error() and thus abort in case no free
PCI slot is available or the requested PCI slot is already in use by
another device. For the hotplug case this behavior is not acceptable.
This patch makes qemu pass up the error properly, so the calling code
can decide whenever it wants to exit with an error (on startup) or
whenever it wants to continue (hotplug).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The PCI bus on x86 requires ACPI for hotplug support, thus disbling ACPI
also disables hotplug for the PCI bus. This patch makes qemu check
whenever the PCI bus in question can handle hotplug before trying to add
devices. This is needed because qdev will abort() on any attempt to
hotplug devices into a non-hotpluggable bus.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All "normal" system emulation targets in qemu I'm aware of display
output on either VGA or serial output.
Our S390x virtio machine doesn't have such kind of legacy hardware. So
instead we need to default to a virtio console.
Add flags to QEMUMachine to indicate which kind of default devices make
sense for the machine in question. Use it for S390x: enable virtcon,
disable serial, parallel and vga.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
i.e. -global PCI.<property>=<value> will set a default property for all
PCI devices. Also works for the compat properties used by machine
types.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch renames the compat properties into global properties and
makes them more generic. The compatibility stuff is only one of
multiple possible users now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Device names with whitespace require quoting in the shell and in the
monitor. Some of the offenders are also overly long. Some have a
more convenient alias, some don't.
The place for verbose device names is DeviceInfo member desc. The
name should be short & sweet.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Using the qdev name for the product description makes for inconvenient
qdev names.
Put the product description in new USBDeviceInfo member product_desc.
Make usb_qdev_init() use it. No user or guest visible change, since
the value is still the same.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's not a device name, it's the USB product description string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On hosts without high-res timers it is impossible to inject rtc interrupt
faster then 1kHz. Windows sometimes configures RTC to generate 1kHz
interrupts, so we can't inject missed interrupts when running on such
hosts. Always injecting an interrupt on REG_C read is also not an option
since Windows wait for REG_C to become zero with interrupt disabled
during boot. This patch uses mixed approach: accelerate timer + inject
up to 1000 interrupts on REG_C read.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
migrating between hosts which have different features
might break silently, if the migration destination
does not support some features supported by source.
Prevent this from happening by comparing acked feature
bits with the mask supported by the device.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This just adds the rom file to the vmware SVGA chipset so it boots.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Interrupt disable bit is mandatory in PCI spec.
Implement it to make devices spec compliant.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
interrupt status is a mandatory feature in PCI spec,
so devices must implement it to be spec compliant.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
This rearranges code in preparation for interrupt state
implementation.
Changes:
- split up bus walk away from interrupt handling
into a subroutine
- change irq_state from an array to bitmask
- verify that irq_state values are 0 or 1 on load
There are no functional changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
Function mask is a mandatory feature in MSIX
spec so not implementing it is a spec violation.
Implement.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
rename ENABLE_OFFSET -> CONTROL_OFFSET, since
same byte includes function mask.
This is in preparation for function mask support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to use the new S390x virtio bus we just introduced, we also
need a machine description that sets up the machine according to our
PV specification.
Let's add that machine description and be happy!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On S390x we don't want to go through the hassle of emulating real existing
hardware, because we don't need to for running Linux.
So let's instead implement a machine that is 100% based on VirtIO which we
fortunately implement already.
This patch implements the bus that is the groundwork for such an S390x
virtio machine.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This implements the audio control or volume read support as needed by
some systems. A Conectiva Parolin system required this to detect an IDE
device as CD-ROM, through the CDVOLREAD ioctl.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some PAGE constants were used instead of the macros we already have
defined in internal.h.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* buf was too small for longer register names.
* Use consistent upper case for nouns in register names.
* Use better name for array with e100 register names.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This should avoid truncating the register name when debugging.
Signed-off-by: David Benjamin <davidben@mit.edu>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In mb_mod_length a return value is stored that is negative in error case. With
an unsigned type the check goes wrong.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes the follow error when LSI_DEBUG is set.
CC libhw64/lsi53c895a.o
cc1: warnings being treated as errors
qemu/hw/lsi53c895a.c: In function 'lsi_io_mapfunc':
qemu/hw/lsi53c895a.c:1932: error: format '%08x' expects type 'unsigned int', but argument 2 has type 'pcibus_t'
qemu/hw/lsi53c895a.c: In function 'lsi_ram_mapfunc':
/qemu/hw/lsi53c895a.c:1947: error: format '%08x' expects type 'unsigned int', but argument 2 has type 'pcibus_t'
qemu/hw/lsi53c895a.c: In function 'lsi_mmio_mapfunc':
qemu/hw/lsi53c895a.c:1957: error: format '%08x' expects type 'unsigned int', but argument 2 has type 'pcibus_t'
make[1]: *** [lsi53c895a.o] Error 1
make: *** [subdir-libhw64] Error 2
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A code review run by Steve Grubb complained about code in e1000.c:
In hw/e1000.c at line 89, vlan is declared to be 4 bytes.
At line 382 is an attempt to do a memmove over it with a size of 12.
This was fixed by splitting the memmove in two calls and
adding a comment to the declaration of vlan and data.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Vendor identification, product identification and product revision level
should be padded with spaces without a terminating NULL character, see
SCSI-2 standard, 8.2.5.1 Standard INQUIRY data.
Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some recent change made PPC guests always start at address 0x0 because env
isn't synced to kvm_state on first bootup.
I'm not sure if this is the correct bugfix, but at least it makes PPC boot
again with KVM enabled.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Cirrus vga has a copy of many PCI macros,
and it doesn't even use them. Clean up.
We also don't need to override header type
as it is NORMAL by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
PCI memory should be disabled at reset, otherwise
we might claim transactions at address 0.
I/O should also be disabled, although for cirrus
it is harmless to enable it as we do not
have I/O bar.
Note: bios fix needed for this patch to work
was already applied:
previously bios incorrently assumed that it does not
need to enable i/o unless device has i/o bar.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Either rename variables and functions to refer to write errors (which is what
they actually do) or introduce a parameter to distinguish reads and writes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to allow proper progress reporting to the monitor that
initiated the migration, forward the monitor reference through the
migration layer down to SaveLiveStateHandler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the size that we want to transmit is in another field, but in an
unit different that bytes
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Support for buffer that are pointed by a pointer (i.e. not embedded)
where the size that we want to use is a field in the state.
We also need a new place to store where to start in the middle of the
buffer, as now it is a pointer, not the offset of the 1st field.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
