Update the S390 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-33-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; remove stray double semicolon; drop
TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the M68K main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-32-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the OpenRISC main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't implement sigreturn on this target so there is no
code there to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-31-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the UniCore32 main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't support signals on this target so there is no sigreturn code
to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-30-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the Alpha main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-13-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define;
PC is env->pc, not env->ir[IR_PV]]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the SH4 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-12-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the SPARC main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-9-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the 32-bit and 64-bit ARM main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-6-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Update the x86 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code rather than passing it
back out as the "return code" from do_sigreturn()
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch EAX
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-5-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently we define a QEMU-internal errno TARGET_QEMU_ESIGRETURN
only on the MIPS and PPC targets; move this to errno_defs.h
so it is available for all architectures, and renumber it to 513.
We pick 513 because this is safe from future use as a system call return
value: Linux uses it as ERESTART_NOINTR internally and never allows that
errno to escape to userspace.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-4-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: TARGET_ERESTARTSYS split out into preceding patch, add comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Define TARGET_ERESTARTSYS; like the kernel, we will use this to
indicate that a guest system call should be restarted. We use
the same value the kernel does for this, 512.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
[PMM: split out from the patch which moves and renumbers
TARGET_QEMU_ESIGRETURN, add comment on usage]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some of the signal handling was a mess with a mixture of tabs and 8 space
indents.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-3-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: just rebased]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The function do_openat() is not consistent about whether it is
returning a host errno or a guest errno in case of failure.
Standardise on returning -1 with errno set (ie caller has
to call get_errno()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
x86_cpudef_init() doesn't do anything anymore, cpudef_init(),
cpudef_setup(), and x86_cpudef_init() can be finally removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This decouples logging further from config-target.h
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new-in-ARMv8 YIELD instruction has been implemented to throw
an EXCP_YIELD back up to the QEMU main loop. In system emulation
we use this to decide to schedule a different guest CPU in SMP
configurations. In usermode emulation there is nothing to do,
so just ignore it and resume the guest.
This prevents an abort with "unhandled CPU exception 0x10004"
if the guest process uses the YIELD instruction.
Reported-by: Hunter Laux <hunterlaux@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1456833171-31900-1-git-send-email-peter.maydell@linaro.org
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The windows socket functions look identical to the normal POSIX
sockets functions, but instead of setting errno, the caller needs
to call WSAGetLastError(). QEMU has tried to deal with this
incompatibility by defining a socket_error() method that callers
must use that abstracts the difference between WSAGetLastError()
and errno.
This approach is somewhat error prone though - many callers of
the sockets functions are just using errno directly because it
is easy to forget the need use a QEMU specific wrapper. It is
not always immediately obvious that a particular function will
in fact call into Windows sockets functions, so the dev may not
even realize they need to use socket_error().
This introduces an alternative approach to portability inspired
by the way GNULIB fixes portability problems. We use a macro to
redefine the original socket function names to refer to a QEMU
wrapper function. The wrapper function calls the original Win32
sockets method and then sets errno from the WSAGetLastError()
value.
Thus all code can simply call the normal POSIX sockets APIs are
have standard errno reporting on error, even on Windows. This
makes the socket_error() method obsolete.
We also bring closesocket & ioctlsocket into this approach. Even
though they are non-standard Win32 names, we can't wrap the normal
close/ioctl methods since there's no reliable way to distinguish
between a file descriptor and HANDLE in Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now that CPSR.E is set correctly, prepare for when setend will be able
to change it; bswap data in and out of strex manually by comparing
SCTLR.B, CPSR.E and TARGET_WORDS_BIGENDIAN (we do not have the luxury
of using TCGMemOps).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ PC changes:
* Moved SCTLR/CPSR logic to arm_cpu_data_is_big_endian
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If doing big-endian linux-user mode, set both the CPSR.E and SCTLR.E0E
bits. This sets big-endian mode for data accesses.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bswap_code is a CPU property of sorts ("is the iside endianness the
opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the
actual CPU state involved here which is SCTLR.B (set for BE32
binaries, clear for BE8).
Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code.
The next patches will make data fetches honor both SCTLR.B and
CPSR.E appropriately.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased on master (Jan 2016)
* s/TARGET_USER_ONLY/CONFIG_USER_ONLY
* Use bswap_code() for disas_set_info() instead of raw sctlr_b
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This matches the idiom used by get_user_data_* later in the series,
and will help when bswap_code will be replaced by SCTLR.B.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When linux-user code is calling cpsr_write(), use a restrictive
mask to ensure we are limiting the set of CPSR bits we update.
In particular, don't allow the mode bits to be changed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-5-git-send-email-peter.maydell@linaro.org
Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
getrandom() has been introduced in kernel 3.17 and is now used during
the boot sequence of Debian unstable (stretch/sid).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
x86, m68k, ppc, sh4 and sparc failed to enable timerfd, because they
didn't have timerfd_create system call defined. Instead QEMU
defined timerfd syscall. Checking with kernel sources, it appears
kernel developers reused timerfd syscall number with timerfd_create,
presumably since no userspace called the old syscall number.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU lists deprecated system call numbers in for Aarch64. These
are never enabled for Linux kernel, so don't define them in Qemu
either. Remove the ifdef around host_to_target_stat64 since
all architectures need it now.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Sync syscall numbers to match the linux v4.5-rc1 kernel.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Our implementation of shmat() and shmdt() for linux-user was
using "zero guest address" as its marker for "entry in the
shm_regions[] array is not in use". This meant that if the
guest did a shmdt(0) we would match on an unused array entry
and call page_set_flags() with both start and end addresses zero,
which causes an assertion failure.
Use an explicit in_use flag to manage the shm_regions[] array,
so that we avoid this problem.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Pavel Shamis <pasharesearch@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Set the default to the latest CPU version to have the
largest set of available features.
It is also really needed in little-endian mode because
POWER7 is not really supported in this mode and some distros
(at least debian) generate POWER8 code for their ppc64le target.
Fixes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813698
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This fixes double-definitions in linux-user builds when using the UST
tracing backend (which indirectly includes the system's "syscall.h").
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
target_fd_trans is an array of "TargetFdTrans *": compute size
accordingly. Use g_renew() as proposed by Paolo.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Split the bits that require it to exec/log.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-10-git-send-email-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WeIo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160111' into staging
January 2016 Linux-user queque
# gpg: Signature made Mon 11 Jan 2016 14:13:57 GMT using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160111:
linux-user/mmap.c: Use end instead of real_end in target_mmap
linux-user: Add SOCKOP_sendmmsg and SOCKOP_recvmmsg socket call, wire them up.
linux-user: Update m68k syscall definitions to match Linux 4.4.
linux-user/syscall.c: Use SOL_SOCKET instead of level for setsockopt()
linux-user: enable sigaltstack for all architectures
unicore32: convert get_sp_from_cpustate from macro to inline
linux-user/mmap.c: Always zero MAP_ANONYMOUS memory in mmap_frag()
linux-user,sh4: fix signal retcode address
linux-user: check fd is >= 0 in fd_trans_host_to_target_data/fd_trans_host_to_target_addr
linux-user: manage bind with a socket of SOCK_PACKET type.
linux-user: add a function hook to translate sockaddr
linux-user: rename TargetFdFunc to TargetFdDataFunc, and structure fields accordingly
linux-user: SOCK_PACKET uses network endian to encode protocol in socket()
linux-user/syscall.c: malloc()/calloc() to g_malloc()/g_try_malloc()/g_new0()
linux-user: in poll(), if nfds is 0, pfd can be NULL
linux-user: correctly align target_epoll_event
linux-user: add signalfd/signalfd4 syscalls
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The fragment must effectively be mapped only to "end" not to "real_end"
(which is a host page aligned address, and thus this is not a fragment).
It is consistent with what it is done in the case of one single page.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds the definitions for the socket calls SOCKOP_sendmmsg
and SOCKOP_recvmmsg and wires them up with the rest of the code.
The necessary function do_sendrecvmmsg() is already present in
linux-user/syscall.c. After adding these two definitions and wiring
them up, I no longer receive an error message about the
unimplemented socket calls when running "apt-get update" on Debian
unstable running on qemu with glibc_2.21 on m68k.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In this case, level is TARGET_SOL_SOCKET, but we need SOL_SOCKET for
setsockopt().
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This change covers arm, aarch64, mips. Others to follow?
The change was prompted by QEMU warning about a syscall 384 (get_random())
with Debian armhf binaries (ARMv7).
Signed-off-by: Johan Ouwerkerk <jm.ouwerkerk@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is no reason to limit sigaltstack syscall to just a few
architectures and pretend it is not implemented for others.
If some architecture is not ready for this, that architecture
should be fixed instead.
This fixes LP#1516408.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
All other architectures define get_sp_from_cpustate as an inline function,
only unicore32 uses a #define. With this, some usages are impossible, for
example, enabling sigaltstack in linux-user/syscall.c results in
linux-user/syscall.c: In function ‘do_syscall’:
linux-user/syscall.c:8299:39: error: dereferencing ‘void *’ pointer [-Werror]
get_sp_from_cpustate(arg1, arg2, get_sp_from_cpustate((CPUArchState *)cpu_env));
^
linux-user/syscall.c:8299:39: error: request for member ‘regs’ in something not a structure or union
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
There is no reason to limit sigaltstack syscall to just a few
architectures and pretend it is not implemented for others.
If some architecture is not ready for this, that architecture
should be fixed instead.
This fixes LP#1516408.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All other architectures define get_sp_from_cpustate as an inline function,
only unicore32 uses a #define. With this, some usages are impossible, for
example, enabling sigaltstack in linux-user/syscall.c results in
linux-user/syscall.c: In function ‘do_syscall’:
linux-user/syscall.c:8299:39: error: dereferencing ‘void *’ pointer [-Werror]
get_sp_from_cpustate(arg1, arg2, get_sp_from_cpustate((CPUArchState *)cpu_env));
^
linux-user/syscall.c:8299:39: error: request for member ‘regs’ in something not a structure or union
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When mapping MAP_ANONYMOUS memory fragments, still need notice about to
set it zero, or it will cause issues.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
To return from a signal, setup_frame() puts an instruction to
be executed in the stack. This sequence calls the syscall sigreturn().
The address of the instruction must be set in the PR register
to be executed.
This patch fixes this: the current code sets the register to the address
of the instruction in the host address space (which can be 64bit whereas
PR is only 32bit), but the virtual CPU can't access this address space,
so we put in PR the address of the instruction in the guest address space.
This patch also removes an useless variable (ret) in the modified functions.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This is obsolete, but if we want to use dhcp with an old distro (like debian
etch), we need it. Some users (like dhclient) use SOCK_PACKET with AF_PACKET
and the kernel allows that.
packet(7)
In Linux 2.0, the only way to get a packet socket was by calling
socket(AF_INET, SOCK_PACKET, protocol). This is still supported but
strongly deprecated. The main difference between the two methods is
that SOCK_PACKET uses the old struct sockaddr_pkt to specify an inter‐
face, which doesn't provide physical layer independence.
struct sockaddr_pkt {
unsigned short spkt_family;
unsigned char spkt_device[14];
unsigned short spkt_protocol;
};
spkt_family contains the device type, spkt_protocol is the IEEE 802.3
protocol type as defined in <sys/if_ether.h> and spkt_device is the
device name as a null-terminated string, for example, eth0.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
in PACKET(7) :
packet_socket = socket(AF_PACKET, int socket_type, int protocol);
[...]
protocol is the IEEE 802.3 protocol
number in network order. See the <linux/if_ether.h> include file for a
list of allowed protocols. When protocol is set to htons(ETH_P_ALL)
then all protocols are received. All incoming packets of that protocol
type will be passed to the packet socket before they are passed to the
protocols implemented in the kernel.
[...]
Compatibility
In Linux 2.0, the only way to get a packet socket was by calling
socket(AF_INET, SOCK_PACKET, protocol).
We need to tswap16() the protocol because on big-endian, the ABI is
waiting for, for instance for ETH_P_ALL, 0x0003 (big endian ==
network order), whereas on little-endian it is waiting for 0x0300.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Convert malloc()/ calloc() calls to g_malloc()/ g_try_malloc()/ g_new0()
All heap memory allocation should go through glib so that we can take
advantage of a single memory allocator and its debugging/tracing features.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
According to comments in /usr/include/linux/eventpoll.h,
poll_event is packed only on x86_64.
And to be sure fields are correctly aligned in epoll_data,
use abi_XXX types for all of them.
Moreover, fd type is wrong: fd is int, not ulong.
This has been tested with a ppc guest on an x86_64 host:
without this patch, systemd crashes (core).
CC: Alexander Graf <agraf@suse.de>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch introduces a system very similar to the one used in the kernel
to attach specific functions to a given file descriptor.
In this case, we attach a specific "host_to_target()" translator to the fd
returned by signalfd() to be able to byte-swap the signalfd_siginfo
structure provided by read().
This patch allows to execute the example program given by
man signalfd(2):
#include <sys/signalfd.h>
#include <signal.h>
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#define handle_error(msg) \
do { perror(msg); exit(EXIT_FAILURE); } while (0)
int
main(int argc, char *argv[])
{
sigset_t mask;
int sfd;
struct signalfd_siginfo fdsi;
ssize_t s;
sigemptyset(&mask);
sigaddset(&mask, SIGINT);
sigaddset(&mask, SIGQUIT);
/* Block signals so that they aren't handled
according to their default dispositions */
if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1)
handle_error("sigprocmask");
sfd = signalfd(-1, &mask, 0);
if (sfd == -1)
handle_error("signalfd");
for (;;) {
s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo));
if (s != sizeof(struct signalfd_siginfo))
handle_error("read");
if (fdsi.ssi_signo == SIGINT) {
printf("Got SIGINT\n");
} else if (fdsi.ssi_signo == SIGQUIT) {
printf("Got SIGQUIT\n");
exit(EXIT_SUCCESS);
} else {
printf("Read unexpected signal\n");
}
}
}
$ ./signalfd_demo
^CGot SIGINT
^CGot SIGINT
^\Got SIGQUIT
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
"Unimplemented" messages go to stderr, everything else goes to tracepoints
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure that all log writes are protected by qemu_loglevel_mask or,
in serious cases, go to both the log and stderr.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, the same message is printed both on stderr and in the log.
Avoid duplicate output in the default case where stderr _is_ the log,
and standardize this to stderr+log where it used to use stdio+log.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Anthony reported that >4GB guests on Xen with 32bit QEMU broke after
commit 4ed023c ("Round up RAMBlock sizes to host page sizes", 2015-11-05).
In that patch sizes are masked against qemu_host_page_size/mask which
are uintptr_t, and thus 32bit on a 32bit QEMU, even though the ram space
might be bigger than 4GB on Xen.
Since ram_addr_t is not available on user-mode emulation targets, ensure
that we get a sign extension when masking away the low bits of the address.
Remove the ~10 year old scary comment that the type of these variables
is probably wrong, with another equally scary comment. The new comment
however does not have "???" in it, which is arguably an improvement.
For completeness use the alignment macros in linux-user and bsd-user
instead of manually doing an &. linux-user and bsd-user are not affected
by the Xen issue, however.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes: 4ed023ce2a
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to use g_malloc0 to zero the memory if we memcpy to
the whole buffer afterwards anyway. Actually, there is even
a function which combines both steps, g_memdup, so let's use
this function here instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Casting to a union type is a gcc (and clang) extension. Other compilers
might not support it. This is not a problem today, but the type casts
can be removed easily. Smatch now no longer complains like before:
linux-user/syscall.c:3190:18: warning: cast to non-scalar
linux-user/syscall.c:7348:44: warning: cast to non-scalar
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This should help clarify the purpose of the function that returns
the host system's CPU cycle count.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
ppc portion
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Notice raise and bpt, decoding the constants embedded in the
nop addil instruction in the x0 slot.
[rth: Generalize TILEGX_EXCP_OPCODE_ILL to TILEGX_EXCP_SIGNAL.
Drop validation of signal values.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443243635-4886-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Remove the spreg[EX1] handling, as it's irrelevant to user-mode.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443312618-13641-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
They content several new macro members, also contents TARGET_N*.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443240605-2924-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
All error conditions that target_mprotect checks are also checked
by target_mmap. EACCESS cannot happen because we are just removing
PROT_WRITE. ENOMEM should not happen because we are modifying a
whole VMA (and we have bigger problems anyway if it happens).
Fixes a Coverity false positive, where Coverity complains about
target_mprotect's return value being passed to tb_invalidate_phys_range.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
qemu has already considered about some targets may have no traditional
signals. And openrisc's setup_frame() is dummy, but it can be supported
by setup_rt_frame().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Under Alpha host, EAGAIN is redefined to 35, so it need be remapped too.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch allows to run example given by open_by_handle_at(2):
The following shell session demonstrates the use of these two programs:
$ echo 'Can you please think about it?' > cecilia.txt
$ ./t_name_to_handle_at cecilia.txt > fh
$ ./t_open_by_handle_at < fh
open_by_handle_at: Operation not permitted
$ sudo ./t_open_by_handle_at < fh # Need CAP_SYS_ADMIN
Read 31 bytes
$ rm cecilia.txt
Now we delete and (quickly) re-create the file so that it has the same
content and (by chance) the same inode.[...]
$ stat --printf="%i\n" cecilia.txt # Display inode number
4072121
$ rm cecilia.txt
$ echo 'Can you please think about it?' > cecilia.txt
$ stat --printf="%i\n" cecilia.txt # Check inode number
4072121
$ sudo ./t_open_by_handle_at < fh
open_by_handle_at: Stale NFS file handle
See the man page for source code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Whilst calls to do_fork() are wrapped in get_errno() this does not
translate return values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently, __target_cmsg_nxthdr compares a pointer derived from
target_cmsg against the msg_control field of target_msgh (through
subtraction). This failed for me when emulating i386 code under x86_64,
because pointers in the host address space and pointers in the guest
address space were not the same. This patch passes the initial value of
target_cmsg into __target_cmsg_nxthdr.
I found and fixed two more related bugs:
- __target_cmsg_nxthdr now returns the new cmsg pointer instead of the
old one.
- tgt_space (in host_to_target_cmsg) doesn't count "sizeof (struct
target_cmsghdr)" twice anymore.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Instead of creating a temporary copy for the whole environment and
the arguments, directly copy everything to the target stack.
For this to work, we have to change the order of stack creation and
copying the arguments.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The system mode binaries provide a similar alias
and it makes common options like --version and --help
work as expected.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As suggested by Laurent, use EXIT_SUCCESS and EXIT_FAILURE from
stdlib.h instead of numeric values.
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch adds better support for diagnosing option
parser errors. The previous implementation just printed
the usage text and exited when a bad option or argument
was found. This made it very difficult to determine why
the usage was being displayed and it was doubly confusing
for cases like '--help' (it wasn't clear that --help was
actually an error).
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This option is already available on the system mode
binaries. It would be better if long options were
supported (i.e. --help), but this is okay for now.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Rename ELF_MACHINE to be PPC specific. This is used as-is by the
various PPC bootloaders and is locally defined to ELF_MACHINE in linux
user in PPC specific ifdeffery.
This removes another architecture specific definition from the global
namespace (as desired by multi-arch).
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only generic code relying on this is linux-user. Linux user
already has a lot of #ifdef TARGET_ customisation so instead, define
ELF_ARCH as either EM_ARM or EM_AARCH64 appropriately.
The armv7m bootloader can just pass EM_ARM directly, as that
is architecture specific code. Note that arm_boot already has its own
logic selecting an arm specific elf machine so this makes V7M more
consistent with arm_boot.
This removes another architecture specific definition from the global
namespace.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For many arch's this macro is defined as the predicatable behaviour
of checking the argument for eqaulity against ELF_ARCH. Provide a
default define as such, so only archs with special handling (usually
allowing multiple EM values) need to provide a def.
Arches that do any of:
1: provide this def exactly the same way as the new default
(alpha, x86_64)
2: check against ELF_MACHINE while defining ELF_ARCH == ELF_MACHINE
(arm, aarch64)
3: check against EM_FOO directly while defining ELF_ARCH == EM_FOO
(unicore32, sparc32, ppc32, mips, openrisc, sh4, cris, m86k)
have their elf_check_arch removed as the default will provide the
correct behaviour.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In most (but not all) cases, ELF_MACHINE and ELF_ARCH are safely the
same. Default ELF_MACHINE to ELF_ARCH. This makes defining ELF_MACHINE
optional for target-*/cpu.h when they are known to match.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are setting SRR0 to the instruction before the one causing the
unaligned exception. A quick testcase:
. = 0x100
.globl _start
_start:
/* Cause a 0x600 */
li 3,0x1
stwcx. 3,0,3
1: b 1b
. = 0x600
1: b 1b
Built into something we can load as a BIOS image:
gcc -mbig -c test.S
ld -EB -Ttext 0x0 -o test test.o
objcopy -O binary test test.bin
Run with:
qemu-system-ppc64 -nographic -bios test.bin
Shows an incorrect SRR0 (points at the li):
SRR0 0000000000000100
With the patch we get the correct SRR0:
SRR0 0000000000000104
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some of architectures (e.g. tilegx), several syscall macros are not
supported, so switch them.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP457D6FC9B2B9BA87AEB22CB9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add main working flow feature, system call processing feature, and elf64
tilegx binary loading feature, based on Linux kernel tilegx 64-bit
implementation.
[rth: Moved all of the implementation of atomic instructions to a later patch.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP938552D42808AA60634582B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
They are based on Linux kernel tilegx architecture for 64 bit binary,
and also based on tilegx ABI reference document, and also reference from
other targets implementations.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP2508945F92945BB525605A3B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Warnings from the Sparse static analysis tool:
linux-user/main.c:40:12: warning:
symbol 'filename' was not declared. Should it be static?
linux-user/main.c:41:12: warning:
symbol 'argv0' was not declared. Should it be static?
linux-user/main.c:42:5: warning:
symbol 'gdbstub_port' was not declared. Should it be static?
linux-user/main.c:43:11: warning:
symbol 'envlist' was not declared. Should it be static?
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of files were including assert.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is some iffy lock hierarchy going on in translate-all.c. To
fix it, we need to take the mmap_lock in cpu-exec.c. Make the
functions globally available.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
spinlock is only used in two cases:
* cpu-exec.c: to protect TranslationBlock
* mem_helper.c: for lock helper in target-i386 (which seems broken).
It's a pthread_mutex_t in user-mode, so we can use QemuMutex directly,
with an #ifdef. The #ifdef will be removed when multithreaded TCG
will need the mutex as well.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-5-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[Merge Emilio G. Cota's patch to remove volatile. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the A64 instruction set, the semihosting call instruction
is 'HLT 0xf000'. Wire this up to call do_arm_semihosting()
if semihosting is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <christopher.covington@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-10-git-send-email-peter.maydell@linaro.org
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base
and the macros GUEST_BASE and RESERVED_VA become useless: replace
them by their values.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.
Anyway, guest base use can be disabled lively by setting guest
base to 0.
CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the MIPS N64 ABI when QEMU reads the break/trap instruction so that
it can inspect the break/trap code it reads 8 rather than 4 bytes
which means it finds the code field from the instruction after the
break/trap instruction. This then causes the break/trap handling
code to fail because it does not understand the code number.
The fix forces QEMU to always read 4 bytes of instruction data rather
than deciding how much to read based on the ABI.
Signed-off-by: Andrew Bennett <andrew.bennett@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.
Scripted conversion for target-* change:
for I in target-*/cpu.h; do
sed -i \
's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
$I;
done
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All callsites to this function navigate the cpu->env_ptr only for the
function to take the env ptr back to the original cpu ptr. Change the
function to just pass in the CPU pointer instead. Removes a core code
usage of ENV_GET_CPU() (in gdbstub.c).
Cc: Riku Voipio <riku.voipio@iki.fi>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All of the core-code usages of this API have the cpu pointer handy so
pass it in. There are only 3 architecture specific usages (2 of which
are commented out) which can just use ENV_GET_CPU() locally to get the
cpu pointer. The reduces core code usage of the CPU env, which brings
us closer to common-obj'ing these core files.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In qemu-linux-user, when calling gethostbyname2(),
it was hanging in .__res_nmkquery.
(gdb) bt
0 in .__res_nmkquery () from /lib64/libresolv.so.2
1 in .__libc_res_nquery () from /lib64/libresolv.so.2
2 in .__libc_res_nsearch () from /lib64/libresolv.so.2
3 in ._nss_dns_gethostbyname3_r () from /lib64/libnss_dns.so.2
4 in ._nss_dns_gethostbyname2_r () from /lib64/libnss_dns.so.2
5 in .gethostbyname2_r () from /lib64/libc.so.6
6 in .gethostbyname2 () from /lib64/libc.so.6
.__res_nmkquery() is:
...
do { RANDOM_BITS (randombits); } while ((randombits & 0xffff) == 0);
...
<.__res_nmkquery+112>: mftbl r11
<.__res_nmkquery+116>: clrlwi r10,r11,16
<.__res_nmkquery+120>: cmpwi cr7,r10,0
<.__res_nmkquery+124>: beq cr7,<.__res_nmkquery+112>
but as mftbl (Move From Time Base Lower) is not implemented,
r11 is always 0, so we have an infinite loop.
This patch fills the Time Base register with cpu_get_real_ticks().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alexander Graf <agraf@suse.de>
When executing a 64bit target chroot on 64bit host,
the ioctl() command can mismatch.
It seems the previous commit doesn't solve the problem in
my case:
9c6bf9c7 linux-user: Fix ioctl cmd type mismatch on 64-bit targets
For example, a ppc64 chroot on an x86_64 host:
bash-4.3# ls
Unsupported ioctl: cmd=0x80087467
Unsupported ioctl: cmd=0x802c7415
The origin of the problem is in syscall.c:do_ioctl().
static abi_long do_ioctl(int fd, abi_long cmd, abi_long arg)
In this case (ppc64) abi_long is long (on the x86_64), and
cmd = 0x0000000080087467
then
if (ie->target_cmd == cmd)
target_cmd is int, so target_cmd = 0x80087467
and to compare an int with a long, the sign is extended to 64bit,
so the comparison is:
if (0xffffffff80087467 == 0x0000000080087467)
which doesn't match whereas it should.
This patch uses int in the case of the target command type
instead of abi_long.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When a thread is spawned, cpu_copy re-initializes
the bp & wp lists of current thread, instead of the ones
of the new thread.
The effect is that breakpoints are no longer hit.
Signed-off-by: Thierry Bultel <thierry.bultel@basystemes.fr>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The target payloads in cmsg conversions may not have the alignment
required by the host. Using the get_user and put_user functions is
the easiest way to handle this and also do the byte-swapping we
require.
(Note that prior to this commit target_to_host_cmsg was incorrectly
using __put_user() rather than __get_user() for the SCM_CREDENTIALS
conversion, which meant it wasn't getting the benefit of the
misalignment handling.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The previous code for handling payload length when converting
cmsg structures from host to target had a number of problems:
* we required the msg->msg_controllen to declare the buffer
to have enough space for final trailing padding (we were
checking against CMSG_SPACE), whereas the kernel does not
require this, and common userspace code assumes this. (In
particular, glibc's "try to talk to nscd" code that it will
run on startup will receive a cmsg with a 4 byte payload and
only allocate 4 bytes for it, which was causing us to do
the wrong thing on architectures that need 8-alignment.)
* we weren't correctly handling the fact that the SO_TIMESTAMP
payload may be larger for the target than the host
* we weren't marking the messages with MSG_CTRUNC when we did
need to truncate a message that wasn't truncated by the host,
but were instead logging a QEMU message; since truncation is
always the result of a guest giving us an insufficiently
sized buffer, we should report it to the guest as the kernel
does and don't log anything
Rewrite the parts of the function that deal with length to
fix these issues, and add a comment in target_to_host_cmsg
to explain why the overflow logging it does is a QEMU bug,
not a guest issue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TARGET_ELF_PAGESTART is required to use abi_ulong to correctly handle
addresses for different target bits width.
This patch fixes a problem when running a 64-bit user mode application
on 32-bit host machines.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We store all struct types in an array of static size without ever
checking whether we overrun it. Of course some day someone (like me
in another, ancient ALSA enabling patch set) will run into the limit
without realizing it.
So let's make the allocation dynamic. We already know the number of
structs that we want to allocate, so we only need to pass the variable
into the respective piece of code.
Also, to ensure we don't accidently overwrite random memory, add some
asserts to sanity check whether a thunk is actually part of our array.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Only exposing FPU and LLSC as the only features
supported by the translator.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove cpu_smm_register and cpu_smm_update. Instead, each CPU
address space gets an extra region which is an alias of
/machine/smram. This extra region is enabled or disabled
as the CPU enters/exits SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove them from the sundry exec-all.h header, since they are only used by
the TCG runtime in exec.c and user-exec.c.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a routine to access the correct floating point register,
to simplify future expansion.
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Misspelled system call name in macro was causing timerfd_create not
to be supported for the ARM target.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function is a nop for user mode, so just remove them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1426496617-10702-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If QEMU forks after the CPU threads have been created, qemu_mutex_lock_iothread
will not be able to do qemu_cpu_kick_thread. There is no solution other than
assuming that forks after the CPU threads have been created will end up in an
exec. Forks before the CPU threads have been created (such as -daemonize)
have to call rcu_after_fork manually.
Notably, the oxygen theme for GTK+ forks and shows a "No such process" error
without this patch.
This patch can be reverted once the iothread loses the "kick the TCG thread"
magic.
User-mode emulation does not use the iothread, so it can also call
rcu_after_fork.
Reported by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
New threads always point at the same env which is incorrect and usually
leads to a crash.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The second and fourth argument are in/out parameters, store them back
after the syscall. Also, the fourth argument was mishandled, and EFAULT
handling was missing.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
start/end_exclusive() need be pairs, except the start_exclusive() in
stop_all_tasks() which is only used by force_sig(), which will be abort.
So at present, start_exclusive() in stop_all_task() need not be paired.
queue_signal() may call force_sig(), or return after kill pid (or queue
signal). If could return from queue_signal(), stop_all_task() would not
be called in time, the next end_exclusive() would be issue.
So in arm_kernel_cmpxchg64_helper() for ARM, need remove end_exclusive()
after queue_signal(). The related commit: "97cc756 linux-user: Implement
new ARM 64 bit cmpxchg kernel helper".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When support was added for TrustZone to ARM CPU emulation, we failed
to correctly update the support for the linux-user implementation of
the get/set_tls syscalls. This meant that accesses to the TPIDRURO
register via the syscalls were always using the non-secure copy of
the register even if native MRC/MCR accesses were using the secure
register. This inconsistency caused most binaries to segfault on startup
if the CPU type was explicitly set to one of the TZ-enabled ones like
cortex-a15. (The default "any" CPU doesn't have TZ enabled and so is
not affected.)
Use access_secure_reg() to determine whether we should be using
the secure or the nonsecure copy of TPIDRURO when emulating these
syscalls.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Message-id: 1426505198-2411-1-git-send-email-m.ilin@samsung.com
[PMM: rewrote commit message to more clearly explain the issue
and its consequences.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit b8a173b25c, reversing
changes made to 5de090464f.
(I applied this pull request when I should not have done so, and
am now immediately reverting it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was the only caller of cpu_init() that was not checking for NULL
yet.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Simple "hello world" MIPS N32 userland program crashes with segfault due to
incorrectly defined stat structure in QEMU.
Correct "target_stat" definition to match kernel's "stat64" as in MIPS N32
there are only plain "stat" syscalls using 64-bit structure.
Reported-by: Daniel Sanders <daniel.sanders@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Tested-by: Daniel Sanders <daniel.sanders@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Fix TARGET_SI_PAD_SIZE calculation to match the way the kernel does it.
Use different TARGET_SI_PREAMBLE_SIZE for 32-bit and 64-bit targets.
Signed-off-by: Maxim Ostapenko <m.ostapenko@partner.samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In abi_long do_ioctl_dm(), after lock_user() call, the code does
not call unlock_user() before going to failure return in default case.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In main.c, all SIG* should be TARGET_SIG*, since the relevant functions
(queue_signal() and gdb_handlesig()) expect TARGET_SIG*.
The corresponding vi command is "1,$ s/\<SIG/TARGET_SIG/g".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It is only a typo issue, need use tswapal(target_vec[i].iov_len) for the
len.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When failure occurs during locking of vec[i], we also need to unlock all
already locked vec[i] in failure processing code block before return.
Code in unlock_user() checks vec[i].iov_base for NULL, so there's no
need not check it .
If error is EFAULT when "i == 0", vec[i].iov_base is NULL, we can just
skip it, so can still use "while (--i >= 0)" loop condition.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When passing ancillary data through a unix socket, handle
credentials properly instead of doing a simple copy and
issuing a warning.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The m68k signal frame setup code which writes the signal return
trampoline code to the stack was assuming that a 'long' was 32 bits;
on 64 bit systems this meant we would end up writing the 32 bit
(2 insn) trampoline sequence to retaddr+4,retaddr+6 instead of
the intended retaddr+0,retaddr+2, resulting in a guest crash when
it tried to execute the invalid zero-bytes at retaddr+0.
Fix by using uint32_t instead; also use uint16_t rather than short
for consistency. This fixes bug LP:1404690.
Reported-by: Michel Boaventura
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Without this fix, qemu segfaults when emulating the sigaltstack syscall,
because it incorrectly treats the ss_flags field as 64 bits rather than 32
bits.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
linux-user passes the cmd argument of the ioctl syscall as a signed long,
but compares it to an unsigned int when iterating through the ioctl_entries
list. When the cmd is a large value like 0x80047476 (TARGET_TIOCSWINSZ on
mips64) it gets sign-extended to 0xffffffff80047476, causing the comparison
to fail and resulting in lots of spurious "Unsupported ioctl" errors.
Changing the target_cmd field in the ioctl_entries list to a signed int
causes those values to be sign-extended as well during the comparison.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The resource argument is translated from host to target for
[gs]etprlimit but not for prlimit64. Fix this.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The function copy_siginfo_to_user() just calls tswap_siginfo(), so
call the latter function directly and delete the wrapper function.
The wrapper is actually misleading since it implies that the
semantics are like the kernel function with the same name which
copies the data to a guest user-space address. In fact tswap_siginfo()
just does data-structure conversion between two structures whose
addresses are host addresses (the copy to userspace is handled
in QEMU by the lock_user/unlock_user calls).
This also fixes clang complaints about the wrapper being unused
in some configs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The function end_exclusive() isn't used on all targets; mark it as
such to avoid a clang warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The start_exclusive() infrastructure is used on all target
architectures, even if only to do the "stop all CPUs before
dumping core" in force_sig(), so be consistent and call
cpu_exec_start/end in the main loop of every target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
