Say QEMU is configured with bindir = "/usr/bin" and a firmware path
that starts with "/usr/share/qemu". Ever since QEMU 5.2, QEMU's
install has been relocatable: if you move qemu-system-x86_64 from
/usr/bin to /home/username/bin, it will start looking for firmware in
/home/username/share/qemu. Previously, you would get a non-relocatable
install where the moved QEMU will keep looking for firmware in
/usr/share/qemu.
Windows almost always wants relocatable installs, and in fact that
is why QEMU 5.2 introduced relocatability in the first place.
However, newfangled distribution mechanisms such as AppImage
(https://docs.appimage.org/reference/best-practices.html), and
possibly NixOS, also dislike using at runtime the absolute paths
that were established at build time.
On POSIX systems you almost never care; if you do, your usecase
dictates which one is desirable, so there's no single answer.
Obviously relocatability works fine most of the time, because not many
people have complained about QEMU's switch to relocatable install,
and that's why until now there was no way to disable relocatability.
But a non-relocatable, non-modular binary can help if you want to do
experiments with old firmware and new QEMU or vice versa (because you
can just upgrade/downgrade the firmware package, and use rpm2cpio or
similar to extract the QEMU binaries outside /usr), so allow both.
This patch allows one to build a non-relocatable install using a new
option to configure. Why? Because it's not too hard, and because
it helps the user double check the relocatability of their install.
Note that the same code that handles relocation also lets you run QEMU
from the build tree and pick e.g. firmware files from the source tree
transparently. Therefore that part remains active with this patch,
even if you configure with --disable-relocatable.
Suggested-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make all items of config-host.h consistent. To keep the --disable-coroutine-pool
code visible to the compiler, mutuate the IS_ENABLED() macro from Linux.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Setting --bindir= to an absolute path that is shorter than the
prefix causes GCC to complain about array accesses out of bounds.
The code however is safe, so disable the warning and explain why
we are doing so.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 59bde21374 ("util/log: do not close and reopen log files when
flags are turned off") prevented switching away from stderr on a
subsequent invocation of qemu_set_log_internal(). This prevented
switching away from stderr with the 'logfile' monitor command as well
as an invocation like
> ./qemu-system-x86_64 -trace 'qemu_mutex_lock,file=log'
from opening the specified log file.
Fixes: 59bde21374 ("util/log: do not close and reopen log files when flags are turned off")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231004124446.491481-1-f.ebner@proxmox.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix:
util/guest-random.c:90:45: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
int qemu_guest_random_seed_main(const char *optarg, Error **errp)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-13-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix:
util/cutils.c:1147:17: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const char *exec_dir = qemu_get_exec_dir();
^
util/cutils.c:1035:20: note: previous declaration is here
static const char *exec_dir;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-12-philmd@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmUd4/YPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpyM8H/02cRbJcQOjYt7j68zPW6GaDXxBI/UmdWDyG
15LZZbGNOPjyjNd3Vz1M7stQ5rhoKcgo/RdI+0E60a78svgW5JvpXoXR3pksc3Dx
v28B/akXwHUErYFSZQ+2VHNc8OhCd0v2ehxZxbwPEAYIOAj3hcCIVoPGXTnKJmAJ
imr5hjH0wZUc0+xdsmn8Vfdv5NTzpwfVObbGiMZejeJsaoh0y6Rt8RANBMY67KQD
S7/HPlVuDYf/y43t4ZEHNYuV9RaCdZZYlLWwV1scdKaYcofgmtJOKbOdCjHRXgj+
004Afb3rggIoCfnCzOFzhGx+MLDtLjvEn2N4oLEWCLi+k/3huaA=
=GAvH
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci: features, cleanups
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
libvhost-user: handle shared_object msg
vhost-user: add shared_object msg
hw/display: introduce virtio-dmabuf
util/uuid: add a hash function
virtio: remove unused next argument from virtqueue_split_read_next_desc()
virtio: remove unnecessary thread fence while reading next descriptor
virtio: use shadow_avail_idx while checking number of heads
libvhost-user.c: add assertion to vu_message_read_default
pcie_sriov: unregister_vfs(): fix error path
hw/i386/pc: improve physical address space bound check for 32-bit x86 systems
amd_iommu: Fix APIC address check
vdpa net: follow VirtIO initialization properly at cvq isolation probing
vdpa net: stop probing if cannot set features
vdpa net: fix error message setting virtio status
hw/pci-bridge/cxl-upstream: Add serial number extended capability support
hw/cxl: Support 4 HDM decoders at all levels of topology
hw/cxl: Fix and use same calculation for HDM decoder block size everywhere
hw/cxl: Add utility functions decoder interleave ways and target count.
hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c
vdpa net: zero vhost_vdpa iova_tree pointer at cleanup
...
Conflicts:
hw/core/machine.c
Context conflict with commit 314e0a84cd ("hw/core: remove needless
includes") because it removed an adjacent #include.
Add hash function to uuid module using the
djb2 hash algorithm.
Add a couple simple unit tests for the hash
function, checking collisions for similar UUIDs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Message-Id: <20231002065706.94707-2-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently we set _FORTIFY_SOURCE=2 as a compiler argument when the
meson 'optimization' setting is non-zero, the compiler is GCC and
the target is Linux.
While the default QEMU optimization level is 2, user could override
this by setting CFLAGS="-O0" or --extra-cflags="-O0" when running
configure and this won't be reflected in the meson 'optimization'
setting. As a result we try to enable _FORTIFY_SOURCE=2 and then the
user gets compile errors as it only works with optimization.
Rather than trying to improve detection in meson, it is simpler to
just check the __OPTIMIZE__ define from osdep.h.
The comment about being incompatible with clang appears to be
outdated, as compilation works fine without excluding clang.
In the coroutine code we must set _FORTIFY_SOURCE=0 to stop the
logic in osdep.h then enabling it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20231003091549.223020-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In all likelihood, the compiler with lto doesn't see the function being
used, from assembly macro __try1. Help it by marking the function has
being used.
Resolves:
https://gitlab.com/qemu-project/qemu/-/issues/1904
Fixes: commit d89f30b4df ("win32: wrap socket close() with an exception handler")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Fix:
util/vhost-user-server.c: In function ‘set_watch’:
util/vhost-user-server.c:274:20: warning: declaration of ‘vu_fd_watch’ shadows a previous local [-Wshadow=compatible-local]
274 | VuFdWatch *vu_fd_watch = g_new0(VuFdWatch, 1);
| ^~~~~~~~~~~
util/vhost-user-server.c:271:16: note: shadowed declaration is here
271 | VuFdWatch *vu_fd_watch = find_vu_fd_watch(server, fd);
| ^~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230904161235.84651-18-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
- Graph locking part 4 (node management)
- qemu-img map: report compressed data blocks
- block-backend: process I/O in the current AioContext
-----BEGIN PGP SIGNATURE-----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=qTNA
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Graph locking part 4 (node management)
- qemu-img map: report compressed data blocks
- block-backend: process I/O in the current AioContext
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmULHnURHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9aB5hAAqH8To7WIUtg1rj1PY809ck78ghm18PKg
# TNdN7IbrXQghX5foh2VgPwVVl+JaW2CSrJYWQcAO6AbvFduNIi9iKzI6RT0xKXpb
# b8oQXS7zntFzwBv8ohOU5NSVJOgVmNP4h5qJIMmXgB9ZcLFG40zggVH2qQT7guUf
# 9MAc81kI/d5vvSHY0ZjdHjNOgwG4q1j8yytL7OFqWUfB8sXloUCA9lT7w4jIYD8L
# v2StUOLWB01Zts2o8SCNaFxuajs6wUee8b/DM1cyPyLy4KtOdXvLKhq2NlXpLo2i
# aZFr4PtizTVwrQZIJttA9jqM+QCsDOsiSat3BLNNsKUaCWHZB0rOGLCzMCtisyOo
# 4PzuL4UI21ik2zieO1qVM+Thqvw16kHtp6dD9pGk4X4ogGreGYEIxzBl79luR+AV
# NCRizoeFWTHKymS1tSoKrWT9ZNHcLmwemO6Tt1rMYk9jV3T4uY5e1NwxaUavEfsX
# f8dLfQjhNiySOoDknT1OSerBOVdTXURS2ri5H3GZxrxvJ4jOeFkn52C8r3YlZ3Wp
# Cr9LCUJZeXgwY+Q1JQ3D4VLY8aZ83txpw6XKEy0eTEv5wxkBj5LWhXx7hNb5F3lg
# bqaRYijVJn+P82wVxlftIzMfNeVBFHzFE90taPV5grJjr8lgrGBFmD7Puc97kfDX
# oTDBwRxJeew=
# =qTNA
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Sep 2023 12:31:49 EDT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (28 commits)
block: mark aio_poll as non-coroutine
block-backend: process zoned requests in the current AioContext
block-backend: process I/O in the current AioContext
test-bdrv-drain: avoid race with BH in IOThread drain test
block: remove AIOCBInfo->get_aio_context()
qemu-img: map: report compressed data blocks
block: add BDRV_BLOCK_COMPRESSED flag for bdrv_block_status()
block: Mark bdrv_add/del_child() and caller GRAPH_WRLOCK
block: Mark bdrv_unref_child() GRAPH_WRLOCK
block: Mark bdrv_root_unref_child() GRAPH_WRLOCK
block: Take graph rdlock in bdrv_change_aio_context()
block: Take graph rdlock in bdrv_drop_intermediate()
block: Mark bdrv_parent_cb_change_media() GRAPH_RDLOCK
block: Mark bdrv_child_perm() GRAPH_RDLOCK
block: Mark bdrv_get_cumulative_perm() and callers GRAPH_RDLOCK
block: Mark bdrv_parent_perms_conflict() and callers GRAPH_RDLOCK
block: Mark bdrv_attach_child() GRAPH_WRLOCK
block: Call transaction callbacks with lock held
block: Mark bdrv_attach_child_common() GRAPH_WRLOCK
block: Mark bdrv_replace_child_tran() GRAPH_WRLOCK
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Fix for file-posix's zoning code crashing on I/O errors
- Throttling refactoring
-----BEGIN PGP SIGNATURE-----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=oKgk
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2023-09-01' of https://gitlab.com/hreitz/qemu into staging
Block patches
- Fix for file-posix's zoning code crashing on I/O errors
- Throttling refactoring
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmTxnMISHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfYkUP+gMG9hhzvgjj/tw9rEBQjciihzcQmqQJ
# 2Mm37RH2jj5bnnTdaTbMkcRRwVhncYSCwK9q5EYVbZmU9C/v4YJmsSEQlcl7wVou
# hbPUv6NHaBrJZX9nxNSa2RHui6pZMLKa/D0rJVB7NjYBrrRtiPo7kiLVQYjYXa2g
# kcCCfY4t3Z2RxOP31mMXRjYlhJE9bIuZdTEndrKme8KS2JGPZEJ9xjkoW1tj96EX
# oc/Cg2vk7AEtsFYA0bcD8fTFkBDJEwyYl3usu7Tk24pvH16jk7wFSqRVSsDMfnER
# tG8X3mHLIY0hbSkpzdHJdXINvZ6FWpQb0CGzIKr+pMiuWVdWr1HglBr0m4pVF+Y4
# A6AI6VX2JJgtacypoDyCZC9mzs1jIdeiwq9v5dyuikJ6ivTwEEoeoSLnLTN3AjXn
# 0mtQYzgCg5Gd6+rTo7XjSO9SSlbaVrDl/B2eXle6tmIFT5k+86fh0hc+zTmP8Rkw
# Knbc+5Le95wlMrOUNx2GhXrTGwX510hLxKboho/LITxtAzqvXnEJKrYbnkm3WPnw
# wfHnR5VQH1NKEpiH/p33og6OV/vu9e7vgp0ZNZV136SnzC90C1zMUwg2simJW701
# 34EtN0XBX8XBKrxfe7KscV9kRE8wrWWJVbhp+WOcQEomGI8uraxzWqDIk/v7NZXv
# m4XBscaB+Iri
# =oKgk
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Sep 2023 04:11:46 EDT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2023-09-01' of https://gitlab.com/hreitz/qemu:
tests/file-io-error: New test
file-posix: Simplify raw_co_prw's 'out' zone code
file-posix: Fix zone update in I/O error path
file-posix: Check bs->bl.zoned for zone info
file-posix: Clear bs->bl.zoned on error
block/throttle-groups: Use ThrottleDirection instread of bool is_write
fsdev: Use ThrottleDirection instread of bool is_write
throttle: use THROTTLE_MAX/ARRAY_SIZE for hard code
throttle: use enum ThrottleDirection instead of bool is_write
cryptodev: use NULL throttle timer cb for read direction
test-throttle: test read only and write only
throttle: support read-only and write-only
test-throttle: use enum ThrottleDirection
throttle: introduce enum ThrottleDirection
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The synchronous bdrv_aio_cancel() function needs the acb's AioContext so
it can call aio_poll() to wait for cancellation.
It turns out that all users run under the BQL in the main AioContext, so
this callback is not needed.
Remove the callback, mark bdrv_aio_cancel() GLOBAL_STATE_CODE just like
its blk_aio_cancel() caller, and poll the main loop AioContext.
The purpose of this cleanup is to identify bdrv_aio_cancel() as an API
that does not work with the multi-queue block layer.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230912231037.826804-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
IA-64 and PA-RISC host support is already removed with commit
b1cef6d02f ("Drop remaining bits of ia64 host support").
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230810225922.21600-1-akihiko.odaki@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use autofree heap allocation instead of variable-length array on the
stack.
The codebase has very few VLAs, and if we can get rid of them all we
can make the compiler error on new additions. This is a defensive
measure against security bugs where an on-stack dynamic allocation
isn't correctly size-checked (e.g. CVE-2021-3527).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20230824164706.2652277-1-peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The ongoing QEMU multi-queue block layer effort makes it possible for multiple
threads to process I/O in parallel. The nbd block driver is not compatible with
the multi-queue block layer yet because QIOChannel cannot be used easily from
coroutines running in multiple threads. This series changes the QIOChannel API
to make that possible.
In the current API, calling qio_channel_attach_aio_context() sets the
AioContext where qio_channel_yield() installs an fd handler prior to yielding:
qio_channel_attach_aio_context(ioc, my_ctx);
...
qio_channel_yield(ioc); // my_ctx is used here
...
qio_channel_detach_aio_context(ioc);
This API design has limitations: reading and writing must be done in the same
AioContext and moving between AioContexts involves a cumbersome sequence of API
calls that is not suitable for doing on a per-request basis.
There is no fundamental reason why a QIOChannel needs to run within the
same AioContext every time qio_channel_yield() is called. QIOChannel
only uses the AioContext while inside qio_channel_yield(). The rest of
the time, QIOChannel is independent of any AioContext.
In the new API, qio_channel_yield() queries the AioContext from the current
coroutine using qemu_coroutine_get_aio_context(). There is no need to
explicitly attach/detach AioContexts anymore and
qio_channel_attach_aio_context() and qio_channel_detach_aio_context() are gone.
One coroutine can read from the QIOChannel while another coroutine writes from
a different AioContext.
This API change allows the nbd block driver to use QIOChannel from any thread.
It's important to keep in mind that the block driver already synchronizes
QIOChannel access and ensures that two coroutines never read simultaneously or
write simultaneously.
This patch updates all users of qio_channel_attach_aio_context() to the
new API. Most conversions are simple, but vhost-user-server requires a
new qemu_coroutine_yield() call to quiesce the vu_client_trip()
coroutine when not attached to any AioContext.
While the API is has become simpler, there is one wart: QIOChannel has a
special case for the iohandler AioContext (used for handlers that must not run
in nested event loops). I didn't find an elegant way preserve that behavior, so
I added a new API called qio_channel_set_follow_coroutine_ctx(ioc, true|false)
for opting in to the new AioContext model. By default QIOChannel uses the
iohandler AioHandler. Code that formerly called
qio_channel_attach_aio_context() now calls
qio_channel_set_follow_coroutine_ctx(ioc, true) once after the QIOChannel is
created.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230830224802.493686-5-stefanha@redhat.com>
[eblake: also fix migration/rdma.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
=dH7/
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* only build util/async-teardown.c when system build is requested
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
# O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
# P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
# cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
# V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
# Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
# =dH7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 07:44:37 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (51 commits)
docs/system/replay: do not show removed command line option
subprojects: add wrap file for libblkio
sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets
sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets
sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets
sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets
target/i386: Restrict declarations specific to CONFIG_KVM
target/i386: Allow elision of kvm_hv_vpindex_settable()
target/i386: Allow elision of kvm_enable_x2apic()
target/i386: Remove unused KVM stubs
target/i386/cpu-sysemu: Inline kvm_apic_in_kernel()
target/i386/helper: Restrict KVM declarations to system emulation
hw/i386/fw_cfg: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'sysemu/tcg.h' header
Revert "mkvenv: work around broken pip installations on Debian 10"
mkvenv: assume presence of importlib.metadata
Python: Drop support for Python 3.7
configure: remove dead code
meson: list leftover CONFIG_* symbols
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230901101302.3618955-9-mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use dev_t instead of a string, and ino_t instead of uint64_t.
The latter is likely to be identical on modern systems but is
more type-correct for usage.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230823065335.1919380-3-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
liburing does not clear sqe->user_data. We must do it ourselves to avoid
undefined behavior in process_cqe() when user_data is used.
Note that fdmon-io_uring is currently disabled, so this is a latent bug
that does not affect users. Let's merge this fix now to make it easier
to enable fdmon-io_uring in the future (and I'm working on that).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230426212639.82310-1-stefanha@redhat.com>
The first dimension of both to_check and
bucket_types_size/bucket_types_units is used as throttle direction,
use THROTTLE_MAX instead of hard coded number. Also use ARRAY_SIZE()
to avoid hard coded number for the second dimension.
Hanna noticed that the two array should be static. Yes, turn them
into static variables.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230728022006.1098509-8-pizhenwei@bytedance.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
enum ThrottleDirection is already there, use ThrottleDirection instead
of 'bool is_write' for throttle API, also modify related codes from
block, fsdev, cryptodev and tests.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230728022006.1098509-7-pizhenwei@bytedance.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Only one direction is necessary in several scenarios:
- a read-only disk
- operations on a device are considered as *write* only. For example,
encrypt/decrypt/sign/verify operations on a cryptodev use a single
*write* timer(read timer callback is defined, but never invoked).
Allow a single direction in throttle, this reduces memory, and uplayer
does not need a dummy callback any more.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230728022006.1098509-4-pizhenwei@bytedance.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Use enum ThrottleDirection instead of number index.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230728022006.1098509-2-pizhenwei@bytedance.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Fix a crash in qemu-user when running
cat /proc/self/maps
in a chroot, where /proc isn't mounted.
The problem was introduced by commit 3ce3dd8ca9 ("util/selfmap:
Rewrite using qemu/interval-tree.h") where in open_self_maps_1() the
function read_self_maps() is called and which returns NULL if it can't
read the hosts /proc/self/maps file. Afterwards that NULL is fed into
interval_tree_iter_first() which doesn't check if the root node is NULL.
Fix it by adding a check if root is NULL and return NULL in that case.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 3ce3dd8ca9 ("util/selfmap: Rewrite using qemu/interval-tree.h")
Message-Id: <ZNOsq6Z7t/eyIG/9@p100>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will want to be able to search the set of mappings.
For this patch, the two users iterate the tree in order.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Clang complains:
../util/oslib-win32.c:483:56: error: omitting the parameter name in a
function definition is a C2x extension [-Werror,-Wc2x-extensions]
win32_close_exception_handler(struct _EXCEPTION_RECORD*,
^
Fix it by adding parameter names.
Message-Id: <20230728142748.305341-4-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
thread_pool_free() might have been called on the `pool`, which would
be a reason for worker_thread() to quit. In this case,
`pool->request_cond` is been destroyed.
If worker_thread() didn't managed to signal `request_cond` before it
been destroyed by thread_pool_free(), we got:
util/qemu-thread-posix.c:198: qemu_cond_signal: Assertion `cond->initialized' failed.
One backtrace:
__GI___assert_fail (assertion=0x55555614abcb "cond->initialized", file=0x55555614ab88 "util/qemu-thread-posix.c", line=198,
function=0x55555614ad80 <__PRETTY_FUNCTION__.17104> "qemu_cond_signal") at assert.c:101
qemu_cond_signal (cond=0x7fffb800db30) at util/qemu-thread-posix.c:198
worker_thread (opaque=0x7fffb800dab0) at util/thread-pool.c:129
qemu_thread_start (args=0x7fffb8000b20) at util/qemu-thread-posix.c:505
start_thread (arg=<optimized out>) at pthread_create.c:486
Reported here:
https://lore.kernel.org/all/ZJwoK50FcnTSfFZ8@MacBook-Air-de-Roger.local/T/#u
To avoid issue, keep lock while sending a signal to `request_cond`.
Fixes: 900fa208f5 ("thread-pool: replace semaphore with condition variable")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230714152720.5077-1-anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
While less susceptible to optimization problems than left and right,
interval_tree_iter_next also reads rb_parent(), so make sure that
stores and loads are atomic.
This goes further than technically required, changing all loads to
be atomic, rather than simply the ones in the iteration side. But
it doesn't really affect the code generation on the rebalance side
and is cleaner to handle everything the same.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ensure that the stores to rb_left and rb_right are complete before
inserting the new node into the tree. Otherwise a concurrent reader
could see garbage in the new leaf.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes a race condition (generally without optimization) in which
the subtree is re-read after the protecting if condition.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We recently introduced "-run-with" for options that influence the
runtime behavior of QEMU. This option has the big advantage that it
can group related options (so that it is easier for the users to spot
them) and that the options become introspectable via QMP this way.
So let's start moving more switches into this option group, starting
with "-chroot" now.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <20230703074447.17044-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Detect CRYPTO in cpuinfo; implement the accel hooks.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the code from tcg/. Fix a bug in that PPC_FEATURE2_ARCH_3_10
is actually spelled PPC_FEATURE2_ARCH_3_1.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce qemu_win32_map_alloc() and qemu_win32_map_free() to allocate
shared memory mapping. The handle can be used to share the mapping with
another process.
Teach qemu_create_displaysurface() to allocate shared memory. Following
patches will introduce other places for shared memory allocation.
Other patches for -display dbus will share the memory when possible with
the client, to avoid expensive memory copy between the processes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230606115658.677673-10-marcandre.lureau@redhat.com>
* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
-----BEGIN PGP SIGNATURE-----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=fOTc
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for 8.1
* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT
# gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js
# LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF
# F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt
# jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO
# WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ
# Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj
# N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN
# Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8
# zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow
# Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe
# uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0=
# =fOTc
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Jun 2023 03:17:14 AM CEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu: (60 commits)
hw/intc: If mmsiaddrcfgh.L == 1, smsiaddrcfg and smsiaddrcfgh are read-only.
target/riscv: Smepmp: Return error when access permission not allowed in PMP
target/riscv/vector_helper.c: Remove the check for extra tail elements
target/riscv/vector_helper.c: clean up reference of MTYPE
target/riscv: Fix initialized value for cur_pmmask
util/log: Add vector registers to log
docs/system: riscv: Add pflash usage details
riscv/virt: Support using pflash via -blockdev option
hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none"
target/riscv: Remove pc_succ_insn from DisasContext
target/riscv: Enable PC-relative translation
target/riscv: Use true diff for gen_pc_plus_diff
target/riscv: Change gen_set_pc_imm to gen_update_pc
target/riscv: Change gen_goto_tb to work on displacements
target/riscv: Introduce cur_insn_len into DisasContext
target/riscv: Fix target address to update badaddr
disas/riscv.c: Remove redundant parentheses
disas/riscv.c: Fix lines with over 80 characters
disas/riscv.c: Remove unused decomp_rv32/64 value for vector instructions
disas/riscv.c: Support disas for Z*inx extensions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
<libkern/OSCacheControl.h> describes sys_icache_invalidate() as
"equivalent to sys_cache_control(kCacheFunctionPrepareForExecution)",
having kCacheFunctionPrepareForExecution defined as:
/* Prepare memory for execution. This should be called
* after writing machine instructions to memory, before
* executing them. It syncs the dcache and icache. [...]
*/
Since the dcache is also sync'd, we can avoid the sys_dcache_flush()
call when both rx/rw pointers are equal.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230605195911.96033-1-philmd@linaro.org>
Per the cache(3) man page, sys_icache_invalidate() and
sys_dcache_flush() are declared in <libkern/OSCacheControl.h>.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230605175647.88395-2-philmd@linaro.org>
Added QEMU option 'vpu' to log vector extension registers such as gpr\fpu.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230410124451.15929-2-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives
introduced for QEMU; their semantics are unclear and they provide a false
sense of safety.
The last use of qatomic_mb_read() has been removed, so delete it.
qatomic_mb_set() instead can survive as an optimized
qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but
rename it to qatomic_set_mb() to match the order of the two
operations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bdrv_pad_request() was the main user of qemu_iovec_init_extended().
HEAD^ has removed that use, so we can remove qemu_iovec_init_extended()
now.
The only remaining user is qemu_iovec_init_slice(), which can easily
inline the small part it really needs.
Note that qemu_iovec_init_extended() offered a memcpy() optimization to
initialize the new I/O vector. qemu_iovec_concat_iov(), which is used
to replace its functionality, does not, but calls qemu_iovec_add() for
every single element. If we decide this optimization was important, we
will need to re-implement it in qemu_iovec_concat_iov(), which might
also benefit its pre-existing users.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230411173418.19549-4-hreitz@redhat.com>
We want to inline qemu_iovec_init_extended() in block/io.c for padding
requests, and having access to qiov_slice() is useful for this. As a
public function, it is renamed to qemu_iovec_slice().
(We will need to count the number of I/O vector elements of a slice
there, and then later process this slice. Without qiov_slice(), we
would need to call qemu_iovec_subvec_niov(), and all further
IOV-processing functions may need to skip prefixing elements to
accomodate for a qiov_offset. Because qemu_iovec_subvec_niov()
internally calls qiov_slice(), we can just have the block/io.c code call
qiov_slice() itself, thus get the number of elements, and also create an
iovec array with the superfluous prefixing elements stripped, so the
following processing functions no longer need to skip them.)
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230411173418.19549-2-hreitz@redhat.com>
We have several limitations and bugs worth fixing; they are
inter-related enough that it is not worth splitting this patch into
smaller pieces:
* ".5k" should work to specify 512, just as "0.5k" does
* "1.9999k" and "1." + "9"*50 + "k" should both produce the same
result of 2048 after rounding
* "1." + "0"*350 + "1B" should not be treated the same as "1.0B";
underflow in the fraction should not be lost
* "7.99e99" and "7.99e999" look similar, but our code was doing a
read-out-of-bounds on the latter because it was not expecting ERANGE
due to overflow. While we document that scientific notation is not
supported, and the previous patch actually fixed
qemu_strtod_finite() to no longer return ERANGE overflows, it is
easier to pre-filter than to try and determine after the fact if
strtod() consumed more than we wanted. Note that this is a
low-level semantic change (when endptr is not NULL, we can now
successfully parse with a scale of 'E' and then report trailing
junk, instead of failing outright with EINVAL); but an earlier
commit already argued that this is not a high-level semantic change
since the only caller passing in a non-NULL endptr also checks that
the tail is whitespace-only.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1629
Fixes: cf923b78 ("utils: Improve qemu_strtosz() to have 64 bits of precision", 6.0.0)
Fixes: 7625a1ed ("utils: Use fixed-point arithmetic in qemu_strtosz", 6.0.0)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-20-eblake@redhat.com>
[eblake: tweak function comment for accuracy]
Previous patches changed all integral qemu_strto*() error paths to
guarantee that *value is never left uninitialized. Do likewise for
qemu_strtod. Also, tighten qemu_strtod_finite() to never return a
non-finite value (prior to this patch, we were rejecting "inf" with
-EINVAL and unspecified result 0.0, but failing "9e999" with -ERANGE
and HUGE_VAL - which is infinite on IEEE machines - despite our
function claiming to recognize only finite values).
Auditing callers, we have no external callers of qemu_strtod, and
among the callers of qemu_strtod_finite:
- qapi/qobject-input-visitor.c:qobject_input_type_number_keyval() and
qapi/string-input-visitor.c:parse_type_number() which reject all
errors (does not matter what we store)
- utils/cutils.c:do_strtosz() incorrectly assumes that *endptr points
to '.' on all failures (that is, it is not distinguishing between
EINVAL and ERANGE; and therefore still does the WRONG THING for
"9.9e999". The change here does not entirely fix that (a later
patch will tackle this more systematically), but at least it fixes
the read-out-of-bounds first diagnosed in
https://gitlab.com/qemu-project/qemu/-/issues/1629
- our testsuite, which we can update to match what we document
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <20230522190441.64278-19-eblake@redhat.com>
Rather than open-coding two different ways to check for an unwanted
negative sign, reuse the same code in both functions. That way, if we
decide down the road to accept "-0" instead of rejecting it, we have
fewer places to change. Also, it means we now get ERANGE instead of
EINVAL for negative values in qemu_strtosz, which is reasonable for
what it represents. This in turn changes the expected output of a
couple of iotests.
The change is not quite complete: negative fractional scaled values
can trip us up. This will be fixed in a later patch addressing other
issues with fractional scaled values.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-18-eblake@redhat.com>
Our goal in writing qemu_strtoi() and friends is to have an interface
harder to abuse than libc's strtol(). Leaving the return value
uninitialized on some but not all error paths does not lend itself
well to this goal; and our documentation wasn't helpful on what to
expect.
Note that the previous patch changed all qemu_strtosz() EINVAL error
paths to slam value to 0 rather than stay uninitialized, even when the
EINVAL eror occurs because of trailing junk. But for the remaining
integral qemu_strto*, it's easier to return the parsed value than to
force things back to zero, in part because of how check_strtox_error
works; in part because people expect that from libc strto* (while
there is no libc strtosz to compare to), and in part because doing so
creates less churn in the testsuite.
Here, the list of affected callers is much longer ('git grep
"qemu_strto[ui]" "*.c" "**/*.c" | grep -v tests/ |wc -l' outputs 107,
although a few of those are the implementation in in cutils.c), so
touching as little as possible is the wisest course of action.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-17-eblake@redhat.com>
Making callers determine whether or not *value was populated on error
is not nice for usability. Pre-patch, we have unit tests that check
that *result is left unchanged on most EINVAL errors and set to 0 on
many ERANGE errors. This is subtly different from libc strtoumax()
behavior which returns UINT64_MAX on ERANGE errors, as well as
different from our parse_uint() which slams to 0 on EINVAL on the
grounds that we want our functions to be harder to mis-use than
strtoumax().
Let's audit callers:
- hw/core/numa.c:parse_numa() fixed in the previous patch to check for
errors
- migration/migration-hmp-cmds.c:hmp_migrate_set_parameter(),
monitor/hmp.c:monitor_parse_arguments(),
qapi/opts-visitor.c:opts_type_size(),
qapi/qobject-input-visitor.c:qobject_input_type_size_keyval(),
qemu-img.c:cvtnum_full(), qemu-io-cmds.c:cvtnum(),
target/i386/cpu.c:x86_cpu_parse_featurestr(), and
util/qemu-option.c:parse_option_size() appear to reject all failures
(although some with distinct messages for ERANGE as opposed to
EINVAL), so it doesn't matter what is in the value parameter on
error.
- All remaining callers are in the testsuite, where we can tweak our
expectations to match our new desired behavior.
Advancing to the end of the string parsed on overflow (ERANGE), while
still returning 0, makes sense (UINT64_MAX as a size is unlikely to be
useful); likewise, our size parsing code is complex enough that it's
easier to always return 0 when endptr is NULL but trailing garbage was
found, rather than trying to return the value of the prefix actually
parsed (no current caller cared about the value of the prefix).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-16-eblake@redhat.com>
All the other qemu_strto* and parse_uint allow a NULL str. Having
qemu_strtosz not crash on qemu_strtosz(NULL, NULL, &value) is an easy
fix that adds some consistency between our string parsers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-13-eblake@redhat.com>
All the qemu_strto*() functions permit a NULL endptr, just like their
libc counterparts, leaving parse_uint() as the oddball that caused
SEGFAULT on NULL and required the user to call parse_uint_full()
instead. Relax things for consistency, even though the testsuite is
the only impacted caller. Add one more unit test to ensure even
parse_uint_full(NULL, 0, &value) works. This also fixes our code to
uniformly favor EINVAL over ERANGE when both apply.
Also fixes a doc mismatch @v vs. a parameter named value.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-9-eblake@redhat.com>
It's already confusing that we have two very similar functions for
wrapping the parse of a 64-bit unsigned value, differing mainly on
whether they permit leading '-'. Adjust the signature of parse_uint()
and parse_uint_full() to be like all of qemu_strto*(): put the result
parameter last, use the same types (uint64_t and unsigned long long
have the same width, but are not always the same type), and mark
endptr const (this latter change only affects the rare caller of
parse_uint). Adjust all callers in the tree.
While at it, note that since cutils.c already includes:
QEMU_BUILD_BUG_ON(sizeof(int64_t) != sizeof(long long));
we are guaranteed that the result of parse_uint* cannot exceed
UINT64_MAX (or the build would have failed), so we can drop
pre-existing dead comparisons in opts-visitor.c that were never false.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-8-eblake@redhat.com>
[eblake: Drop dead code spotted by Markus]
Signed-off-by: Eric Blake <eblake@redhat.com>
These two functions are subtly different, and not just because of
swapped parameter order. It took me adding better unit tests to
figure out why. Document the differences to make it more obvious to
developers trying to pick which one to use, as well as to aid in
upcoming semantic changes.
While touching the documentation, adjust a mis-statement: parse_uint
does not return -EINVAL on invalid base, but assert()s, like all the
other qemu_strto* functions that take a base argument.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-7-eblake@redhat.com>
While we were matching 32-bit strtol in qemu_strtoi, our use of a
64-bit parse was leaking through for some inaccurate answers in
qemu_strtoui in comparison to a 32-bit strtoul (see the unit test for
examples). The comment for that function even described what we have
to do for a correct parse, but didn't implement it correctly: since
strtoull checks for overflow against the wrong values and then
negates, we have to temporarily undo negation before checking for
overflow against our desired value.
Our int wrappers would be a lot easier to write if libc had a
guaranteed 32-bit parser even on platforms with 64-bit long.
Whether we parse C2x binary strings like "0b1000" is currently up to
what libc does; our unit tests intentionally don't cover that at the
moment, though.
Fixes: 473a2a331e ("cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types", v2.12.0)
Signed-off-by: Eric Blake <eblake@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <20230522190441.64278-6-eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
All callers now pass is_external=false to aio_set_fd_handler() and
aio_set_event_notifier(). The aio_disable_external() API that
temporarily disables fd handlers that were registered is_external=true
is therefore dead code.
Remove aio_disable_external(), aio_enable_external(), and the
is_external arguments to aio_set_fd_handler() and
aio_set_event_notifier().
The entire test-fdmon-epoll test is removed because its sole purpose was
testing aio_disable_external().
Parts of this patch were generated using the following coccinelle
(https://coccinelle.lip6.fr/) semantic patch:
@@
expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque;
@@
- aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque)
+ aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque)
@@
expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready;
@@
- aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready)
+ aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-21-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vhost-user activity must be suspended during bdrv_drained_begin/end().
This prevents new requests from interfering with whatever is happening
in the drained section.
Previously this was done using aio_set_fd_handler()'s is_external
argument. In a multi-queue block layer world the aio_disable_external()
API cannot be used since multiple AioContext may be processing I/O, not
just one.
Switch to BlockDevOps->drained_begin/end() callbacks.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-8-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Each vhost-user-blk request runs in a coroutine. When the BlockBackend
enters a drained section we need to enter a quiescent state. Currently
any in-flight requests race with bdrv_drained_begin() because it is
unaware of vhost-user-blk requests.
When blk_co_preadv/pwritev()/etc returns it wakes the
bdrv_drained_begin() thread but vhost-user-blk request processing has
not yet finished. The request coroutine continues executing while the
main loop thread thinks it is in a drained section.
One example where this is unsafe is for blk_set_aio_context() where
bdrv_drained_begin() is called before .aio_context_detached() and
.aio_context_attach(). If request coroutines are still running after
bdrv_drained_begin(), then the AioContext could change underneath them
and they race with new requests processed in the new AioContext. This
could lead to virtqueue corruption, for example.
(This example is theoretical, I came across this while reading the
code and have not tried to reproduce it.)
It's easy to make bdrv_drained_begin() wait for in-flight requests: add
a .drained_poll() callback that checks the VuServer's in-flight counter.
VuServer just needs an API that returns true when there are requests in
flight. The in-flight counter needs to be atomic.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-7-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VuServer object has a refcount field and ref/unref APIs. The name is
confusing because it's actually an in-flight request counter instead of
a refcount.
Normally a refcount destroys the object upon reaching zero. The VuServer
counter is used to wake up the vhost-user coroutine when there are no
more requests.
Avoid confusing by renaming refcount and ref/unref to in_flight and
inc/dec.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-6-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit abe34282 ("win32: avoid mixing SOCKET and file descriptor
space"), we set HANDLE_FLAG_PROTECT_FROM_CLOSE on the socket FD, to
prevent closing the HANDLE with CloseHandle. This raises an exception
which under gdb is fatal, and qemu exits.
Let's catch the expected error instead.
Note: this appears to work, but the mingw64 macro is not well documented
or tested, and it's not obvious how it is meant to be used.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230515132440.1025315-1-marcandre.lureau@redhat.com>
* Fix for a memory corruption due to an extra free
* Fix for a compile breakage
-----BEGIN PGP SIGNATURE-----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=TA2V
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20230524' of https://github.com/legoater/qemu into staging
vfio queue:
* Fix for a memory corruption due to an extra free
* Fix for a compile breakage
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmRtyB4ACgkQUaNDx8/7
# 7KFQvRAAhexL/Q8rWM8og+VESL5gPlpxDhWCI+l76+YJqQzZkgebwZ5rw920f8EG
# bRs5AAk8fPTX/qKKq/JkYMmQwpM2jo8W4elcNumm44WAG7hDwd1LQ3nAZeOcvgU0
# jQ1IwRYcgNo+oOTN9b7GhePQK27OraliLUrf/sBGUWvbdAttVc2pcB91CMur0Dxb
# 9KK2vEA4MJ9B8zf2/ZkaK6Z+28GsratR7803Nvv25rm5sP3VBb9w0TnKZAOmaHLv
# X5Tz8yjNvQxxzB9SzgOK6yMtnrp42ArVC5u2aDa33uzSWUeFiTF1HEFeGAps2nJg
# 8tSNo0fTKhznrVR3q2pyxC05Dp+jmKicrmivc26iBdAWAUxQYX44UQoLYD5ISdti
# nlSE+Is+0ZE5E2tHE9yAOPa4rrXHNBqpueu+VMPbYMyVEqzblP7twYe6HkGPYhrD
# zbx/ABZAAGOf+3YmyL1yQrCc0WyJ2lHDySQt/llMrhkBTCHGEF8yjfWFypluZFWX
# X7Mb0YZP0qPpFsV3TDcrqV3onaFSNehp2EJs2EJAa/DeUNbnKlz4LiYBzZE95egb
# 9PGrLnB5w1Vlp44H+ctrnYj55TnspHT+Qqwvhkr/vOMupZukbGus0VFIU2IDrh2g
# qEqhaigwxfVyZ1Eqwti4IgX8RVX8bW43slR33aD6vsO7jpiP2Pk=
# =TA2V
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 May 2023 01:17:34 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20230524' of https://github.com/legoater/qemu:
util/vfio-helpers: Use g_file_read_link()
vfio/pci: Fix a use-after-free issue
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When _FORTIFY_SOURCE=2, glibc version is 2.35, and GCC version is
12.1.0, the compiler complains as follows:
In file included from /usr/include/features.h:490,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdint.h:26,
from /usr/lib/gcc/aarch64-unknown-linux-gnu/12.1.0/include/stdint.h:9,
from /home/alarm/q/var/qemu/include/qemu/osdep.h:94,
from ../util/vfio-helpers.c:13:
In function 'readlink',
inlined from 'sysfs_find_group_file' at ../util/vfio-helpers.c:116:9,
inlined from 'qemu_vfio_init_pci' at ../util/vfio-helpers.c:326:18,
inlined from 'qemu_vfio_open_pci' at ../util/vfio-helpers.c:517:9:
/usr/include/bits/unistd.h:119:10: error: argument 2 is null but the corresponding size argument 3 value is 4095 [-Werror=nonnull]
119 | return __glibc_fortify (readlink, __len, sizeof (char),
| ^~~~~~~~~~~~~~~
This error implies the allocated buffer can be NULL. Use
g_file_read_link(), which allocates buffer automatically to avoid the
error.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Move the code from tcg/. The only use of these bits so far
is with respect to the atomicity of tcg operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use cpuinfo_init() during init_accel(), and the variable cpuinfo
during test_buffer_is_zero_next_accel(). Adjust the logic that
cycles through the set of accelerators for testing.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a bit to indicate when VMOVDQU is also atomic if aligned.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add cpuinfo.h for i386 and x86_64, and the initialization
for that in util/. Populate that with a slightly altered
copy of the tcg host probing code. Other uses of cpuid.h
will be adjusted one patch at a time.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
QEMU's event loop supports nesting, which means that event handler
functions may themselves call aio_poll(). The condition that triggered a
handler must be reset before the nested aio_poll() call, otherwise the
same handler will be called and immediately re-enter aio_poll. This
leads to an infinite loop and stack exhaustion.
Poll handlers are especially prone to this issue, because they typically
reset their condition by finishing the processing of pending work.
Unfortunately it is during the processing of pending work that nested
aio_poll() calls typically occur and the condition has not yet been
reset.
Disable a poll handler during ->io_poll_ready() so that a nested
aio_poll() call cannot invoke ->io_poll_ready() again. As a result, the
disabled poll handler and its associated fd handler do not run during
the nested aio_poll(). Calling aio_set_fd_handler() from inside nested
aio_poll() could cause it to run again. If the fd handler is pending
inside nested aio_poll(), then it will also run again.
In theory fd handlers can be affected by the same issue, but they are
more likely to reset the condition before calling nested aio_poll().
This is a special case and it's somewhat complex, but I don't see a way
around it as long as nested aio_poll() is supported.
Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2186181
Fixes: c382706925 ("block: Mark bdrv_co_io_(un)plug() and callers GRAPH_RDLOCK")
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230502184134.534703-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To simplify the code, rename coroutine-win32.c to match the option
passed to configure.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU adds the path to glib.h to all compilation commands. This is simpler
due to the pervasive use of static_library, and was grandfathered in from
the previous Make-based build system. Until Meson 0.63 the only way to
do this was to detect glib in configure and use add_project_arguments,
but now it is possible to use add_project_dependencies instead.
gmodule is detected in a separate variable, with export enabled for
modules and disabled for plugin.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new -run-with option with an async-teardown=on|off parameter. It is
visible in the output of query-command-line-options QMP command, so it
can be discovered and used by libvirt.
The option -async-teardown is now redundant, deprecate it.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Fixes: c891c24b1a ("os-posix: asynchronous teardown for shutdown on Linux")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230505120051.36605-2-imbrenda@linux.ibm.com>
[thuth: Add curly braces to fix error with GCC 8.5, fix bug in deprecated.rst]
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no need for the AioContext lock in aio_wait_bh_oneshot().
It's easy to remove the lock from existing callers and then switch from
AIO_WAIT_WHILE() to AIO_WAIT_WHILE_UNLOCKED() in aio_wait_bh_oneshot().
Document that the AioContext lock should not be held across
aio_wait_bh_oneshot(). Holding a lock across aio_poll() can cause
deadlock so we don't want callers to do that.
This is a step towards getting rid of the AioContext lock.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230404153307.458883-1-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use a store-release when enqueuing a new call_rcu, and a load-acquire
when dequeuing; and read the tail after checking that node->next is
consistent, which is the standard message passing pattern and it is
clearer than mb_read/mb_set.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some time after systemd documented LISTEN_PID and LISTEN_FDS for
socket activation, they later added LISTEN_FDNAMES; now documented at:
https://www.freedesktop.org/software/systemd/man/sd_listen_fds.html
In particular, look at the implementation of sd_listen_fds_with_names():
https://github.com/systemd/systemd/blob/main/src/libsystemd/sd-daemon/sd-daemon.c
If we ever pass LISTEN_PID=xxx and LISTEN_FDS=n to a child process,
but leave LISTEN_FDNAMES=... unchanged as inherited from our parent
process, then our child process using sd_listen_fds_with_names() might
see a mismatch in the number of names (unexpected -EINVAL failure), or
even if the number of names matches the values of those names may be
unexpected (with even less predictable results).
Usually, this is not an issue - the point of LISTEN_PID is to tell
systemd socket activation to ignore all other LISTEN_* if they were
not directed to this particular pid. But if we end up consuming a
socket directed to this qemu process, and later decide to spawn a
child process that also needs systemd socket activation, we must
ensure we are not leaking any stale systemd variables through to that
child. The easiest way to do this is to wipe ALL LISTEN_* variables
at the time we consume a socket, even if we do not yet care about a
LISTEN_FDNAMES passed in from the parent process.
See also https://lists.freedesktop.org/archives/systemd-devel/2023-March/048920.html
Thanks: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230324153349.1123774-1-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A BH callback can free the BH, causing a use-after-free in aio_bh_call.
Fix that by keeping a local copy of the re-entrancy guard pointer.
Buglink: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=58513
Fixes: 9c86c97f12 ("async: Add an optional reentrancy guard to the BH API")
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20230501141956.3444868-1-alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Update kernel headers to 6.3rc5
* Suppress GCC13 false positive in aio_bh_poll()
* Add new x86 feature bits
* Coverity fixes
* More steps towards removing qatomic_mb_set/read
* Fix reduced-phys-bits value for AMD SEV
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNC0IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNo0wgArWNGKZpbmQ0e5L6ajMvaaPmg4mVL
a2SJGU0TwTp0fUgZr14z2iwzIpSqQrsqhzTIAzOTs0OICDBPBuNvnRucMa+SVQGO
Tc89YAwBVDo66dAKhWi+WR9tx7sTFCso0nbsBfczzdnwAw3g1MJ87Ueqc5tlPGBK
E7YSAD6l4UuogoN5BLU7bSsG/X7bwcyzeUXRB4ik+Z9abWd4DH9qiROnBKLMmBLK
nAi47h8b8MltWORpO+wf6HtkMKi37SAzl9VLHVuHcRhIdY/JhWCRhYSo0HXhgX66
JLVkyxFpIndT0dUW/xnqATGez92FRZyTxHbxbAcWM0SoC1jOVfUXB+7Gdw==
=vxou
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Fix compilation issues under Debian 10
* Update kernel headers to 6.3rc5
* Suppress GCC13 false positive in aio_bh_poll()
* Add new x86 feature bits
* Coverity fixes
* More steps towards removing qatomic_mb_set/read
* Fix reduced-phys-bits value for AMD SEV
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNC0IUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNo0wgArWNGKZpbmQ0e5L6ajMvaaPmg4mVL
# a2SJGU0TwTp0fUgZr14z2iwzIpSqQrsqhzTIAzOTs0OICDBPBuNvnRucMa+SVQGO
# Tc89YAwBVDo66dAKhWi+WR9tx7sTFCso0nbsBfczzdnwAw3g1MJ87Ueqc5tlPGBK
# E7YSAD6l4UuogoN5BLU7bSsG/X7bwcyzeUXRB4ik+Z9abWd4DH9qiROnBKLMmBLK
# nAi47h8b8MltWORpO+wf6HtkMKi37SAzl9VLHVuHcRhIdY/JhWCRhYSo0HXhgX66
# JLVkyxFpIndT0dUW/xnqATGez92FRZyTxHbxbAcWM0SoC1jOVfUXB+7Gdw==
# =vxou
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 29 Apr 2023 01:19:14 PM BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
cpus-common: stop using mb_set/mb_read
async: Suppress GCC13 false positive in aio_bh_poll()
tests: vhost-user-test: release mutex on protocol violation
Update linux headers to v6.3rc5
update-linux-headers.sh: Add missing kernel headers.
Fix libvhost-user.c compilation.
target/i386: Add support for PREFETCHIT0/1 in CPUID enumeration
target/i386: Add support for AVX-NE-CONVERT in CPUID enumeration
target/i386: Add support for AVX-VNNI-INT8 in CPUID enumeration
target/i386: Add support for AVX-IFMA in CPUID enumeration
target/i386: Add support for AMX-FP16 in CPUID enumeration
target/i386: Add support for CMPCCXADD in CPUID enumeration
i386/cpu: Update how the EBX register of CPUID 0x8000001F is set
i386/sev: Update checks and information related to reduced-phys-bits
qemu-options.hx: Update the reduced-phys-bits documentation
qapi, i386/sev: Change the reduced-phys-bits value from 5 to 1
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GCC13 reports an error :
../util/async.c: In function ‘aio_bh_poll’:
include/qemu/queue.h:303:22: error: storing the address of local variable ‘slice’ in ‘*ctx.bh_slice_list.sqh_last’ [-Werror=dangling-pointer=]
303 | (head)->sqh_last = &(elm)->field.sqe_next; \
| ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
../util/async.c:169:5: note: in expansion of macro ‘QSIMPLEQ_INSERT_TAIL’
169 | QSIMPLEQ_INSERT_TAIL(&ctx->bh_slice_list, &slice, next);
| ^~~~~~~~~~~~~~~~~~~~
../util/async.c:161:17: note: ‘slice’ declared here
161 | BHListSlice slice;
| ^~~~~
../util/async.c:161:17: note: ‘ctx’ declared here
But the local variable 'slice' is removed from the global context list
in following loop of the same routine. Add a pragma to silent GCC.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20230420202939.1982044-1-clg@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Devices can pass their MemoryReentrancyGuard (from their DeviceState),
when creating new BHes. Then, the async API will toggle the guard
before/after calling the BH call-back. This prevents bh->mmio reentrancy
issues.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230427211013.2994127-3-alxndr@bu.edu>
[thuth: Fix "line over 90 characters" checkpatch.pl error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use qemu_get_current_aio_context() where possible, since we always
submit work to the current thread anyways.
We want to also be sure that the thread submitting the work is
the same as the one processing the pool, to avoid adding
synchronization to the pool list.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-4-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new helper fetches file system type for a fd. Only Linux is
implemented so far. Currently only tmpfs and hugetlbfs are defined,
but it can grow as needed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fix use-after-free errors in the code path that called error_handle(). A
call to error_handle() will now either free the passed Error 'err' or
assign it to '*errp' if '*errp' is currently NULL. This ensures that 'err'
either has been freed or is assigned to '*errp' if this function returns.
Adjust the two callers of this function to not assign the 'err' to '*errp'
themselves, since this is now handled by error_handle().
Fixes: commit 3ffef1a55c ("error: add global &error_warn destination")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20230406154347.4100700-1-stefanb@linux.ibm.com
qemu-user can hang in a multi-threaded fork. One common
reason is that when creating a TB, between fork and exec
we manipulate a GTree whose memory allocator (GSlice) is
not fork-safe.
Although POSIX does not mandate it, the system's allocator
(e.g. tcmalloc, libc malloc) is probably fork-safe.
Fix some of these hangs by using QTree, which uses the system's
allocator regardless of the Glib version that we used at
configuration time.
Tested with the test program in the original bug report, i.e.:
```
void garble() {
int pid = fork();
if (pid == 0) {
exit(0);
} else {
int wstatus;
waitpid(pid, &wstatus, 0);
}
}
void supragarble(unsigned depth) {
if (depth == 0)
return ;
std::thread a(supragarble, depth-1);
std::thread b(supragarble, depth-1);
garble();
a.join();
b.join();
}
int main() {
supragarble(10);
}
```
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/285
Reported-by: Valentin David <me@valentindavid.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230205163758.416992-3-cota@braap.org>
[rth: Add QEMU_DISABLE_CFI for all callback using functions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If another thread calls aio_set_fd_handler() while the IOThread event
loop is upgrading from ppoll(2) to epoll(7) then we might miss new
AioHandlers. The epollfd will not monitor the new AioHandler's fd,
resulting in hangs.
Take the AioHandler list lock while upgrading to epoll. This prevents
AioHandlers from changing while epoll is being set up. If we cannot lock
because we're in a nested event loop, then don't upgrade to epoll (it
will happen next time we're not in a nested call).
The downside to taking the lock is that the aio_set_fd_handler() thread
has to wait until the epoll upgrade is finished, which involves many
epoll_ctl(2) system calls. However, this scenario is rare and I couldn't
think of another solution that is still simple.
Reported-by: Qing Wang <qinwang@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2090998
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Fam Zheng <fam@euphon.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230323144859.1338495-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vhost_user_server_stop() uses AIO_WAIT_WHILE(). AIO_WAIT_WHILE()
requires that AioContext is only acquired once.
Since blk_exp_request_shutdown() already acquires the AioContext it
shouldn't be acquired again in vhost_user_server_stop().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230323145853.1345527-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Close the given file descriptor, but returns the underlying SOCKET.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230320133643.1618437-2-marcandre.lureau@redhat.com>
Bring the files in line with the QEMU coding style, with spaces
for indentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Manually implement a socketpair() function, using UNIX sockets and
simple peer credential checking.
QEMU doesn't make much use of socketpair, beside vhost-user which is not
available for win32 at this point. However, I intend to use it for
writing some new portable tests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230306122751.2355515-5-marcandre.lureau@redhat.com>
Use a close() wrapper instead, so that we don't need to worry about
closesocket() vs close() anymore, let's hope.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-17-marcandre.lureau@redhat.com>
Until now, a win32 SOCKET handle is often cast to an int file
descriptor, as this is what other OS use for sockets. When necessary,
QEMU eventually queries whether it's a socket with the help of
fd_is_socket(). However, there is no guarantee of conflict between the
fd and SOCKET space. Such conflict would have surprising consequences,
we shouldn't mix them.
Also, it is often forgotten that SOCKET must be closed with
closesocket(), and not close().
Instead, let's make the win32 socket wrapper functions return and take a
file descriptor, and let util/ wrappers do the fd/SOCKET conversion as
necessary. A bit of adaptation is necessary in io/ as well.
Unfortunately, we can't drop closesocket() usage, despite
_open_osfhandle() documentation claiming transfer of ownership, testing
shows bad behaviour if you forget to call closesocket().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-15-marcandre.lureau@redhat.com>
Open-code the socket registration where it's needed, to avoid
artificially used or unclear generic interface.
Furthermore, the following patches are going to make socket handling use
FD-only inside QEMU, but we need to handle win32 SOCKET from libslirp.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-12-marcandre.lureau@redhat.com>
Let's check if the argument is actually a SOCKET, else report an error
and return.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-10-marcandre.lureau@redhat.com>
A more explicit version of qemu_socket_select() with no events.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-8-marcandre.lureau@redhat.com>
This is a wrapper for WSAEventSelect, with Error handling. By default,
it will produce a warning, so callers don't have to be modified
now, and yet we can spot potential mis-use.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-7-marcandre.lureau@redhat.com>
This can help debugging issues or develop, when error handling is
introduced.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-6-marcandre.lureau@redhat.com>
Fortunately, qemu_fork() is no longer used since commit
a95570e3e4 ("io/command: use glib GSpawn, instead of open-coding
fork/exec"). (GSpawn uses posix_spawn() whenever possible instead)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230221124802.4103554-2-marcandre.lureau@redhat.com>
The help text of the -d plugin option has a new line at the end which
is not needed as one is added automatically. Fixing it removes the
unexpected empty line in -d help output.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230119214033.600FB74645F@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Explain that aio_context_notifier_poll() relies on
aio_notify_accept() to catch all the memory writes that were
done before ctx->notified was set to true.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ever since commit 8c6b0356b5 ("util/async: make bh_aio_poll() O(1)",
2020-02-22), synchronization between qemu_bh_schedule() and aio_bh_poll()
is happening when the bottom half is enqueued in the bh_list; not
when the flags are set. Update the documentation to match.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mutex->from_push and mutex->handoff in qemu-coroutine-lock implement
the familiar pattern:
write a write b
smp_mb() smp_mb()
read b read a
The memory barrier is required by the C memory model even after a
SEQ_CST read-modify-write operation such as QSLIST_INSERT_HEAD_ATOMIC.
Add it and avoid the unclear qatomic_mb_read() operation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QemuEvent is currently broken on ARM due to missing memory barriers
after qatomic_*(). Apart from adding the memory barrier, a closer look
reveals some unpaired memory barriers that are not really needed and
complicated the functions unnecessarily. Also, it is relying on
a memory barrier in ResetEvent(); the barrier _ought_ to be there
but there is really no documentation about it, so make it explicit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QemuEvent is currently broken on ARM due to missing memory barriers
after qatomic_*(). Apart from adding the memory barrier, a closer look
reveals some unpaired memory barriers too. Document more clearly what
is going on.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the two uses of asm to expand xgetbv with an inline function.
Since one of the two has been using the mnemonic, assume that the
comment about "older versions of the assember" is obsolete, as even
that is 4 years old.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
replay API is used deeply within TCG common code (common to user
and system emulation). Unfortunately "sysemu/replay.h" requires
some QAPI headers for few system-specific declarations, example:
void replay_input_event(QemuConsole *src, InputEvent *evt);
Since commit c2651c0eaa ("qapi/meson: Restrict UI module to system
emulation and tools") the QAPI header defining the InputEvent is
not generated anymore.
To keep it simple, extract the 'core' replay prototypes to a new
"exec/replay-core.h" header which we include in the TCG code that
doesn't need the rest of the replay API.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221219170806.60580-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The Free Software Foundation moved to a new address and some
sources in QEMU referred to their old location.
The address should be updated and replaced by a pointer to
<https://www.gnu.org/licenses/>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/379
Signed-off-by: Khadija Kamran <kkamran.bese16seecs@seecs.edu.pk>
Message-Id: <576ee9203fdac99d7251a98faa66b9ce1e7febc5.1675941486.git.kkamran.bese16seecs@seecs.edu.pk>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
ctr_el0 access is privileged on this platform and fails as an illegal
instruction.
Windows does not offer a way to flush data cache from userspace, and
only FlushInstructionCache is available in Windows API.
The generic implementation of flush_idcache_range uses,
__builtin___clear_cache, which already use the FlushInstructionCache
function. So we rely on that.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221153006.20300-2-pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last return statement should return true, as we already evaluated that
start == next_dirty
Also, fix hbitmap_status() description in header
Cc: qemu-stable@nongnu.org
Fixes: a6426475a7 ("block/dirty-bitmap: introduce bdrv_dirty_bitmap_status()")
Signed-off-by: Andrey Zhadchenko <andrey.zhadchenko@virtuozzo.com>
Message-Id: <20230202181523.423131-1-andrey.zhadchenko@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
FreeBSD implements pthread headers using TSA (thread safety analysis)
annotations, therefore when an application is compiled with
-Wthread-safety there are some locking/annotation requirements that the
user of the pthread API has to follow.
This will also be the case in QEMU, since util/qemu-thread-posix.c uses
the pthread API. Therefore when building it with -Wthread-safety, the
compiler will throw warnings because the functions are not properly
annotated. We need TSA to be enabled because it ensures that the
critical sections of an annotated variable are properly locked.
In order to make the compiler happy and avoid adding all the necessary
macros to all callers (lock functions should use TSA_ACQUIRE, while
unlock TSA_RELEASE, and this applies to all users of pthread_mutex_lock
and pthread_mutex_unlock), simply use TSA_NO_TSA to supppress such
warnings.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230117135203.3049709-2-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make use of pthread_set_name_np() to be able to set the threads name
on OpenBSD.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <Y57NrCmPTVSXLWC4@humpty.home.comstyle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include it in the .c files instead that use the error reporting
functions.
Message-Id: <20230210111931.1115489-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Teach QEMU to use /dev/userfaultfd when it existed and fallback to the
system call if either it's not there or doesn't have enough permission.
Firstly, as long as the app has permission to access /dev/userfaultfd, it
always have the ability to trap kernel faults which QEMU mostly wants.
Meanwhile, in some context (e.g. containers) the userfaultfd syscall can be
forbidden, so it can be the major way to use postcopy in a restricted
environment with strict seccomp setup.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tracked down with the help of scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-18-armbru@redhat.com>
MSG_PEEK peeks at the channel, The data is treated as unread and
the next read shall still return this data. This support is
currently added only for socket class. Extra parameter 'flags'
is added to io_readv calls to pass extra read flags like MSG_PEEK.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: manish.mishra <manish.mishra@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a helper to create the uffd handle.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We are about to allow passing Int128 to/from tcg helper functions,
but libffi doesn't support __int128_t, so use the structure.
In order for atomic128.h to continue working, we must provide
a mechanism to frob between real __int128_t and the structure.
Provide a new union, Int128Alias, for this. We cannot modify
Int128 itself, as any changed alignment would also break libffi.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
monitor/misc.h has static add_completion_option(). It's useful
elsewhere in the monitor. Since it's not monitor-specific, move it to
util/readline.c renamed to readline_add_completion_of(), and put it to
use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-7-armbru@redhat.com>
We forgot to add this one in "a890643958 util/qht: atomically set b->hashes".
Detected with tsan.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230111151628.320011-3-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-28-alex.bennee@linaro.org>
When we measure FIO read performance (cache=writethrough, bs=4k,
iodepth=64) in VMs, ~80K/s notifications (e.g., EPT_MISCONFIG) are observed
from guest to qemu.
It turns out those frequent notificatons are caused by interference from
worker threads. Worker threads queue bottom halves after completing IO
requests. Pending bottom halves may lead to either aio_compute_timeout()
zeros timeout and pass it to try_poll_mode() or run_poll_handlers() returns
no progress after noticing pending aio_notify() events. Both cause
run_poll_handlers() to call poll_set_started(false) to disable poll mode.
However, for both cases, as timeout is already zeroed, the event loop
(i.e., aio_poll()) just processes bottom halves and then starts the next
event loop iteration. So, disabling poll mode has no value but leads to
unnecessary notifications from guest.
To minimize unnecessary notifications from guest, defer disabling poll
mode to when the event loop is about to be blocked.
With this patch applied, FIO seq-read performance (bs=4k, iodepth=64,
cache=writethrough) in VMs increases from 330K/s to 413K/s IOPS.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Message-id: 20220710120849.63086-1-chao.gao@intel.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221221131435.3851212-6-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221221131435.3851212-2-armbru@redhat.com>
Use the attribute, which is supported by clang, instead of
the #pragma, which is not supported and, for some reason,
also not detected by the meson probe, so we fail by -Werror.
Include only <immintrin.h> as that is the outermost "official"
header for these intrinsics -- emmintrin.h and smmintrin -- are
older SSE2 and SSE4 specific headers, while the immintrin.h
includes all of the Intel intrinsics.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221219130205.687815-5-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This API allows the accelerators to prevent vcpus from issuing
new ioctls while execting a critical section marked with the
accel_ioctl_inhibit_begin/end functions.
Note that all functions submitting ioctls must mark where the
ioctl is being called with accel_{cpu_}ioctl_begin/end().
This API requires the caller to always hold the BQL.
API documentation is in sysemu/accel-blocker.h
Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt
(to minimize cache line bouncing) to keep avoid that new ioctls
run when the critical section starts, and a QemuEvent to wait
that all running ioctls finish.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221111154758.1372674-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
-----BEGIN PGP SIGNATURE-----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=D+Yw
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu into staging
* s390x header clean-ups from Philippe
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
# gpg: Signature made Mon 09 Jan 2023 14:21:19 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/windows: Do not run the qtests in the msys2-32bit job
error handling: Use RETRY_ON_EINTR() macro where applicable
Refactoring: refactor TFR() macro to RETRY_ON_EINTR()
docs/interop: Change the vnc-ledstate-Pseudo-encoding doc into .rst
i386: Deprecate the -no-hpet QEMU command line option
tests/qtest/bios-tables-test: Replace -no-hpet with hpet=off machine parameter
tests/readconfig: spice doesn't support unix socket on windows yet
target/s390x: Restrict sysemu/reset.h to system emulation
target/s390x/tcg/excp_helper: Restrict system headers to sysemu
target/s390x/tcg/misc_helper: Remove unused "memory.h" include
hw/s390x/pv: Restrict Protected Virtualization to sysemu
exec/memory: Expose memory_region_access_valid()
MAINTAINERS: Add MIPS-related docs and configs to the MIPS architecture section
tests/vm: Update get_default_jobs() to work on non-x86_64 non-KVM hosts
qemu-iotests/stream-under-throttle: do not shutdown QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
