New DCD command definitions updated in response to review comments
from Markus.
- Used CxlXXXX instead of CXLXXXXX for newly added types.
- Expanded some abreviations in type names to be easier to read.
- Additional documentation for some fields.
- Replace slightly vague cxl r3.1 references with
"Compute Express Link (CXL) Specification, Revision 3.1, XXXX"
to bring them inline with what it says on the specification cover.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240625170805.359278-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter and coverity report:
We've passed '&data' to address_space_write(), which means "read
from the address on the stack where the function argument 'data'
lives", so instead of writing 64 bytes of data to the guest ,
we'll write 64 bytes which start with a host pointer value and
then continue with whatever happens to be on the host stack
after that.
Indeed the intention was to write 64 bytes of data at the address given.
Fix the parameter to address_space_write().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Link: https://lore.kernel.org/all/CAFEAcA-u4sytGwTKsb__Y+_+0O2-WwARntm3x8WNhvL1WfHOBg@mail.gmail.com/
Fixes: 6bda41a69b ("hw/cxl: Add clear poison mailbox command support.")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Message-Id: <20240531-fix-poison-set-cacheline-v1-1-e3bc7e8f1158@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Before the change, the QMP interface used for add/release DC extents
only allows to release an extent whose DPA range is contained by a single
accepted extent in the device.
With the change, we relax the constraints. As long as the DPA range of
the extent is covered by accepted extents, we allow the release.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-15-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All DPA ranges in the DC regions are invalid to access until an extent
covering the range has been successfully accepted by the host. A bitmap
is added to each region to record whether a DC block in the region has
been backed by a DC extent. Each bit in the bitmap represents a DC block.
When a DC extent is accepted, all the bits representing the blocks in the
extent are set, which will be cleared when the extent is released.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-13-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To simulate FM functionalities for initiating Dynamic Capacity Add
(Opcode 5604h) and Dynamic Capacity Release (Opcode 5605h) as in CXL spec
r3.1 7.6.7.6.5 and 7.6.7.6.6, we implemented two QMP interfaces to issue
add/release dynamic capacity extents requests.
With the change, we allow to release an extent only when its DPA range
is contained by a single accepted extent in the device. That is to say,
extent superset release is not supported yet.
1. Add dynamic capacity extents:
For example, the command to add two continuous extents (each 128MiB long)
to region 0 (starting at DPA offset 0) looks like below:
{ "execute": "qmp_capabilities" }
{ "execute": "cxl-add-dynamic-capacity",
"arguments": {
"path": "/machine/peripheral/cxl-dcd0",
"host-id": 0,
"selection-policy": "prescriptive",
"region": 0,
"extents": [
{
"offset": 0,
"len": 134217728
},
{
"offset": 134217728,
"len": 134217728
}
]
}
}
2. Release dynamic capacity extents:
For example, the command to release an extent of size 128MiB from region 0
(DPA offset 128MiB) looks like below:
{ "execute": "cxl-release-dynamic-capacity",
"arguments": {
"path": "/machine/peripheral/cxl-dcd0",
"host-id": 0,
"removal-policy":"prescriptive",
"region": 0,
"extents": [
{
"offset": 134217728,
"len": 134217728
}
]
}
}
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-12-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL spec 3.1, two mailbox commands are implemented:
Add Dynamic Capacity Response (Opcode 4802h) 8.2.9.9.9.3, and
Release Dynamic Capacity (Opcode 4803h) 8.2.9.9.9.4.
For the process of the above two commands, we use two-pass approach.
Pass 1: Check whether the input payload is valid or not; if not, skip
Pass 2 and return mailbox process error.
Pass 2: Do the real work--add or release extents, respectively.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-11-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add dynamic capacity extent list representative to the definition of
CXLType3Dev and implement get DC extent list mailbox command per
CXL.spec.3.1:.8.2.9.9.9.2.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-10-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add (file/memory backed) host backend for DCD. All the dynamic capacity
regions will share a single, large enough host backend. Set up address
space for DC regions to support read/write operations to dynamic capacity
for DCD.
With the change, the following support is added:
1. Add a new property to type3 device "volatile-dc-memdev" to point to host
memory backend for dynamic capacity. Currently, all DC regions share one
host backend;
2. Add namespace for dynamic capacity for read/write support;
3. Create cdat entries for each dynamic capacity region.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-9-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function ct3_build_cdat_entries_for_mr only uses size of the passed
memory region argument, refactor the function definition to make the passed
arguments more specific.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-8-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With the change, when setting up memory for type3 memory device, we can
create DC regions.
A property 'num-dc-regions' is added to ct3_props to allow users to pass the
number of DC regions to create. To make it easier, other region parameters
like region base, length, and block size are hard coded. If needed,
these parameters can be added easily.
With the change, we can create DC regions with proper kernel side
support like below:
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_dc_region)
echo $region > /sys/bus/cxl/devices/decoder0.0/create_dc_region
echo 256 > /sys/bus/cxl/devices/$region/interleave_granularity
echo 1 > /sys/bus/cxl/devices/$region/interleave_ways
echo "dc0" >/sys/bus/cxl/devices/decoder2.0/mode
echo 0x40000000 >/sys/bus/cxl/devices/decoder2.0/dpa_size
echo 0x40000000 > /sys/bus/cxl/devices/$region/size
echo "decoder2.0" > /sys/bus/cxl/devices/$region/target0
echo 1 > /sys/bus/cxl/devices/$region/commit
echo $region > /sys/bus/cxl/drivers/cxl_region/bind
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-7-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Rename mem_size as static_mem_size for type3 memdev to cover static RAM and
pmem capacity, preparing for the introduction of dynamic capacity to support
dynamic capacity devices.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-6-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'legacy_align' is always NULL, remove it, simplifying
memory_device_pre_plug().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-16-philmd@linaro.org>
'legacy_align' is always NULL, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240617071118.60464-15-philmd@linaro.org>
As error.h suggested, the best practice for callee is to return
something to indicate success / failure.
With returned boolean, there's no need to dereference @errp to check
failure case.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <20240418100433.1085447-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since the memory-device stubs are needed exactly when the Kconfig symbols are not
needed, move them to hw/mem/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-15-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in ct3_realize(), @errp is dereferenced without ERRP_GUARD():
cxl_doe_cdat_init(cxl_cstate, errp);
if (*errp) {
goto err_free_special_ops;
}
Here we check *errp, because cxl_doe_cdat_init() returns void. And
ct3_realize() - as a PCIDeviceClass.realize() method - doesn't get the
NULL @errp parameter, it hasn't triggered the bug that dereferencing
the NULL @errp.
To follow the requirement of @errp, add missing ERRP_GUARD() in
ct3_realize().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240223085653.1255438-4-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When setting GLIB_VERSION_MAX_ALLOWED to GLIB_VERSION_2_58 or higher,
glib adds type safety checks to the g_steal_pointer() macro. This
triggers errors in the ct3_build_cdat_entries_for_mr() function which
uses the g_steal_pointer() for type-casting from one pointer type to
the other (which also looks quite weird since the local pointers have
all been declared with g_autofree though they are never freed here).
Fix it by using a proper typecast instead. For making this possible, we
have to remove the QEMU_PACKED attribute from some structs since GCC
otherwise complains that the source and destination pointer might
have different alignment restrictions. Removing the QEMU_PACKED should
be fine here since the structs are already naturally aligned. Anyway,
add some QEMU_BUILD_BUG_ON() statements to make sure that we've got
the right sizes (without padding in the structs).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Previously not all references mentioned any spec version at all.
Given r3.1 is the current specification available for evaluation at
www.computeexpresslink.org update references to refer to that.
Hopefully this won't become a never ending job.
A few structure definitions have been updated to add new fields.
Defaults of 0 and read only are valid choices for these new DVSEC
registers so go with that for now.
There are additional error codes and some of the 'questions' in
the comments are resolved now.
Update documentation reference to point to the CXL r3.1 specification
with naming closer to what is on the cover.
For cases where there are structure version numbers, add defines
so they can be found next to the register definitions.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126121636.24611-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes Coverity ID 1522368.
Currently error_fatal is set if interleave_ways_dec() is going to return 0
but we should handle that zero return explicitly.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-10-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As g_malloc0/g_malloc() will just exit QEMU on failure there is no
point in checking for it failing.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to check that the memory region size is multiples of the overall
requested address alignment for the device memory address.
We removed that check, because there are cases (i.e., hv-balloon) where
devices unconditionally request an address alignment that has a very large
alignment (i.e., 32 GiB), but the actual memory device size might not be
multiples of that alignment.
However, this change:
(a) allows for some practically impossible DIMM sizes, like "1GB+1 byte".
(b) allows for DIMMs that partially cover hugetlb pages, previously
reported in [1].
Both scenarios don't make any sense: we might even waste memory.
So let's reintroduce that check, but only check that the
memory region size is multiples of the memory region alignment (i.e.,
page size, huge page size), but not any additional memory device
requirements communicated using md->get_min_alignment().
The following examples now fail again as expected:
(a) 1M with 2M THP
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-ram,id=mem1,size=1M \
-device pc-dimm,id=dimm1,memdev=mem1
-> backend memory size must be multiple of 0x200000
(b) 1G+1byte
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-ram,id=mem1,size=1073741825B \
-device pc-dimm,id=dimm1,memdev=mem1
-> backend memory size must be multiple of 0x200000
(c) Unliagned hugetlb size (2M)
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-file,id=mem1,mem-path=/dev/hugepages/tmp,size=511M \
-device pc-dimm,id=dimm1,memdev=mem1
backend memory size must be multiple of 0x200000
(d) Unliagned hugetlb size (1G)
qemu-system-x86_64 -m 4g,maxmem=16g,slots=1 -S -nodefaults -nographic \
-object memory-backend-file,id=mem1,mem-path=/dev/hugepages1G/tmp,size=2047M \
-device pc-dimm,id=dimm1,memdev=mem1
-> backend memory size must be multiple of 0x40000000
Note that this fix depends on a hv-balloon change to communicate its
additional alignment requirements using get_min_alignment() instead of
through the memory region.
[1] https://lkml.kernel.org/r/f77d641d500324525ac036fe1827b3070de75fc1.1701088320.git.mprivozn@redhat.com
Message-ID: <20240117135554.787344-3-david@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Fixes: eb1b7c4bd4 ("memory-device: Drop size alignment check")
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
CONFIG_ALL is tricky to use and was ported over to Meson from the
recursive processing of Makefile variables. Meson sourcesets
however have all_sources() and all_dependencies() methods that
remove the need for it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 6c1b28e9e4 "memory-device: Support empty memory devices"
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
virtio sound card support
vhost-user: back-end state migration
cxl:
line length reduction
enabling fabric management
vhost-vdpa:
shadow virtqueue hash calculation Support
shadow virtqueue RSS Support
tests:
CPU topology related smbios test cases
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVKDDoPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpF08H/0Zts8uvkHbgiOEJw4JMHU6/VaCipfIYsp01
GSfwYOyEsXJ7GIxKWaCiMnWXEm7tebNCPKf3DoUtcAojQj3vuF9XbWBKw/bfRn83
nGO/iiwbYViSKxkwqUI+Up5YiN9o0M8gBFrY0kScPezbnYmo5u2bcADdEEq6gH68
D0Ea8i+WmszL891ypvgCDBL2ObDk3qX3vA5Q6J2I+HKX2ofJM59BwaKwS5ghw+IG
BmbKXUZJNjUQfN9dQ7vJuiuqdknJ2xUzwW2Vn612ffarbOZB1DZ6ruWlrHty5TjX
0w4IXEJPBgZYbX9oc6zvTQnbLDBJbDU89mnme0TcmNMKWmQKTtc=
=vEv+
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes
virtio sound card support
vhost-user: back-end state migration
cxl:
line length reduction
enabling fabric management
vhost-vdpa:
shadow virtqueue hash calculation Support
shadow virtqueue RSS Support
tests:
CPU topology related smbios test cases
Fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVKDDoPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpF08H/0Zts8uvkHbgiOEJw4JMHU6/VaCipfIYsp01
# GSfwYOyEsXJ7GIxKWaCiMnWXEm7tebNCPKf3DoUtcAojQj3vuF9XbWBKw/bfRn83
# nGO/iiwbYViSKxkwqUI+Up5YiN9o0M8gBFrY0kScPezbnYmo5u2bcADdEEq6gH68
# D0Ea8i+WmszL891ypvgCDBL2ObDk3qX3vA5Q6J2I+HKX2ofJM59BwaKwS5ghw+IG
# BmbKXUZJNjUQfN9dQ7vJuiuqdknJ2xUzwW2Vn612ffarbOZB1DZ6ruWlrHty5TjX
# 0w4IXEJPBgZYbX9oc6zvTQnbLDBJbDU89mnme0TcmNMKWmQKTtc=
# =vEv+
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 18:06:50 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (63 commits)
acpi/tests/avocado/bits: enable console logging from bits VM
acpi/tests/avocado/bits: enforce 32-bit SMBIOS entry point
hw/cxl: Add tunneled command support to mailbox for switch cci.
hw/cxl: Add dummy security state get
hw/cxl/type3: Cleanup multiple CXL_TYPE3() calls in read/write functions
hw/cxl/mbox: Add Get Background Operation Status Command
hw/cxl: Add support for device sanitation
hw/cxl/mbox: Wire up interrupts for background completion
hw/cxl/mbox: Add support for background operations
hw/cxl: Implement Physical Ports status retrieval
hw/pci-bridge/cxl_downstream: Set default link width and link speed
hw/cxl/mbox: Add Physical Switch Identify command.
hw/cxl/mbox: Add Information and Status / Identify command
hw/cxl: Add a switch mailbox CCI function
hw/pci-bridge/cxl_upstream: Move defintion of device to header.
hw/cxl/mbox: Generalize the CCI command processing
hw/cxl/mbox: Pull the CCI definition out of the CXLDeviceState
hw/cxl/mbox: Split mailbox command payload into separate input and output
hw/cxl/mbox: Pull the payload out of struct cxl_cmd and make instances constant
hw/cxl: Fix a QEMU_BUILD_BUG_ON() in switch statement scope issue.
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This implementation of tunneling makes the choice that our Type 3 device is
a Logical Device (LD) of a Multi-Logical Device (MLD) that just happens to
only have one LD for now.
Tunneling is supported from a Switch Mailbox CCI (and shortly via MCTP over
I2C connected to the switch MCTP CCI) via an outer level to the FM owned LD
in the MLD Type 3 device. From there an inner tunnel may be used to access
particular LDs.
Protocol wise, the following is what happens in a real system but we
don't emulate the transports - just the destinations and the payloads.
( Host -> Switch Mailbox CCI - in band FM-API mailbox command
or
Host -> Switch MCTP CCI - MCTP over I2C using the CXL FM-API
MCTP Binding.
)
then (if a tunnel command)
Switch -> Type 3 FM Owned LD - MCTP over PCI VDM using the
CXL FM-API binding (addressed by switch port)
then (if unwrapped command also a tunnel command)
Type 3 FM Owned LD to LD0 via internal transport
(addressed by LD number)
or (added shortly)
Host to Type 3 FM Owned MCTP CCI - MCTP over I2C using the
CXL FM-API MCTP Binding.
then (if unwrapped comand is a tunnel comamnd)
Type 3 FM Owned LD to LD0 via internal transport.
(addressed by LD number)
It is worth noting that the tunneling commands over PCI VDM
presumably use the appropriate MCTP binding depending on opcode.
This may be the CXL FMAPI binding or the CXL Memory Device Binding.
Additional commands will need to be added to make this
useful beyond testing the tunneling works.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-18-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Call CXL_TYPE3 once at top of function to avoid multiple invocations.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-16-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make use of the background operations through the sanitize command, per CXL
3.0 specs. Traditionally run times can be rather long, depending on the
size of the media.
Estimate times based on:
https://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-14-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enables having multiple CCIs per devices. Each CCI (mailbox) has it's own
state and command list, so they can't share a single structure.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20231023160806.13206-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Michael Tsirkin observed that there were some unnecessarily
long lines in the CXL code in a recent review.
This patch is intended to rectify that where it does not
hurt readability.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20231023140210.3089-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no strong requirement that the size has to be multiples of the
requested alignment, let's drop it. This is a preparation for hv-baloon.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Let's support empty memory devices -- memory devices that don't have a
memory device region in the current configuration. hv-balloon with an
optional memdev is the primary use case.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
We want to support memory devices that can automatically decide how many
memslots they will use. In the worst case, they have to use a single
memslot.
The target use cases are virtio-mem and the hyper-v balloon.
Let's calculate a reasonable limit such a memory device may use, and
instruct the device to make a decision based on that limit. Use a simple
heuristic that considers:
* A memslot soft-limit for all memory devices of 256; also, to not
consume too many memslots -- which could harm performance.
* Actually still free and unreserved memslots
* The percentage of the remaining device memory region that memory device
will occupy.
Further, while we properly check before plugging a memory device whether
there still is are free memslots, we have other memslot consumers (such as
boot memory, PCI BARs) that don't perform any checks and might dynamically
consume memslots without any prior reservation. So we might succeed in
plugging a memory device, but once we dynamically map a PCI BAR we would
be in trouble. Doing accounting / reservation / checks for all such
users is problematic (e.g., sometimes we might temporarily split boot
memory into two memslots, triggered by the BIOS).
We use the historic magic memslot number of 509 as orientation to when
supporting 256 memory devices -> memslots (leaving 253 for boot memory and
other devices) has been proven to work reliable. We'll fallback to
suggesting a single memslot if we don't have at least 509 total memslots.
Plugging vhost devices with less than 509 memslots available while we
have memory devices plugged that consume multiple memslots due to
automatic decisions can be problematic. Most configurations might just fail
due to "limit < used + reserved", however, it can also happen that these
memory devices would suddenly consume memslots that would actually be
required by other memslot consumers (boot, PCI BARs) later. Note that this
has always been sketchy with vhost devices that support only a small number
of memslots; but we don't want to make it any worse.So let's keep it simple
and simply reject plugging such vhost devices in such a configuration.
Eventually, all vhost devices that want to be fully compatible with such
memory devices should support a decent number of memslots (>= 509).
Message-ID: <20230926185738.277351-13-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
We want to support memory devices that have a dynamically managed memory
region container as device memory region. This device memory region maps
multiple RAM memory subregions (e.g., aliases to the same RAM memory
region), whereby these subregions can be (un)mapped on demand.
Each RAM subregion will consume a memslot in KVM and vhost, resulting in
such a new device consuming memslots dynamically, and initially usually
0. We already track the number of used vs. required memslots for all
memslots. From that, we can derive the number of reserved memslots that
must not be used otherwise.
The target use case is virtio-mem and the hyper-v balloon, which will
dynamically map aliases to RAM memory region into their device memory
region container.
Properly document what's supported and what's not and extend the vhost
memslot check accordingly.
Message-ID: <20230926185738.277351-10-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's track how many memslots are required by plugged memory devices and
how many are currently actually getting used by plugged memory
devices.
"required - used" is the number of reserved memslots. For now, the number
of used and required memslots is always equal, and there are no
reservations. This is a preparation for memory devices that want to
dynamically consume memslots after initially specifying how many they
require -- where we'll end up with reserved memslots.
To track the number of used memslots, create a new address space for
our device memory and register a memory listener (add/remove) for that
address space.
Message-ID: <20230926185738.277351-9-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
We want to support memory devices that have a memory region container as
device memory region that maps multiple RAM memory regions. Let's start
by supporting memory devices that statically map multiple RAM memory
regions and, thereby, consume multiple memslots.
We already have one device that uses a container as device memory region:
NVDIMMs. However, a NVDIMM always ends up consuming exactly one memslot.
Let's add support for that by asking the memory device via a new
callback how many memslots it requires.
Message-ID: <20230926185738.277351-7-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's return the number of free slots instead of only checking if there
is a free slot. Required to support memory devices that consume multiple
memslots.
This is a preparation for memory devices that consume multiple memslots.
Message-ID: <20230926185738.277351-6-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's return the number of free slots instead of only checking if there
is a free slot. While at it, check all address spaces, which will also
consider SMM under x86 correctly.
This is a preparation for memory devices that consume multiple memslots.
Message-ID: <20230926185738.277351-5-david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Support these decoders in CXL host bridges (pxb-cxl), CXL Switch USP
and CXL Type 3 end points.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230913132523.29780-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to avoid having the size of the per HDM decoder register block
repeated in lots of places, create the register definitions for HDM
decoder 1 and use the offset between the first registers in HDM decoder 0 and
HDM decoder 1 to establish the offset.
Calculate in each function as this is more obvious and leads to shorter
line lengths than a single #define which would need a long name
to be specific enough.
Note that the code currently only supports one decoder, so the bugs this
fixes don't actually affect anything.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230913132523.29780-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This has been missing from the start. Assume it should match
with cxl/cxl-component-utils.c as both were part of early
postings from Ben.
Reported-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, when using a true R/O NVDIMM (ROM memory backend) with a label
area, the VM can easily crash QEMU by trying to write to the label area,
because the ROM memory is mmap'ed without PROT_WRITE.
[root@vm-0 ~]# ndctl disable-region region0
disabled 1 region
[root@vm-0 ~]# ndctl zero-labels nmem0
-> QEMU segfaults
Let's remember whether we have a ROM memory backend and properly
reject the write request:
[root@vm-0 ~]# ndctl disable-region region0
disabled 1 region
[root@vm-0 ~]# ndctl zero-labels nmem0
zeroed 0 nmem
In comparison, on a system with a R/W NVDIMM:
[root@vm-0 ~]# ndctl disable-region region0
disabled 1 region
[root@vm-0 ~]# ndctl zero-labels nmem0
zeroed 1 nmem
For ACPI, just return "unsupported", like if no label exists. For spapr,
return "H_P2", similar to when no label area exists.
Could we rely on the "unarmed" property? Maybe, but it looks cleaner to
only disallow what certainly cannot work.
After all "unarmed=on" primarily means: cannot accept persistent writes. In
theory, there might be setups where devices with "unarmed=on" set could
be used to host non-persistent data (temporary files, system RAM, ...); for
example, in Linux, admins can overwrite the "readonly" setting and still
write to the device -- which will work as long as we're not using ROM.
Allowing writing label data in such configurations can make sense.
Message-ID: <20230906120503.359863-2-david@redhat.com>
Fixes: dbd730e859 ("nvdimm: check -object memory-backend-file, readonly=on option")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's avoid iterating over all devices and simply track it in the
DeviceMemoryState.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230623124553.400585-11-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's move memory_device_check_addable() and basic checks out of
memory_device_get_free_addr() directly into memory_device_pre_plug().
Separating basic checks from address assignment is cleaner and
prepares for further changes.
As all memory device users now use memory_devices_init(), and that
function enforces that the size is 0, we can drop the check for an empty
region.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230623124553.400585-10-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's intrduce a new helper that we will use to replace existing memory
device setup code during machine initialization. We'll enforce that the
size has to be > 0.
Once all machines were converted, we'll only allocate ms->device_memory
if the size > 0.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230623124553.400585-3-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's unify the error messages, such that we can simply stop allocating
ms->device_memory if the size would be 0 (and there are no memory
devices ever).
The case of "not supported by the machine" should barely pop up either
way: if the machine doesn't support memory devices, it usually doesn't
call the pre_plug handler ...
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230623124553.400585-2-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
These events include a copy of the device health information at the
time of the event. Actually using the emulated device health would
require a lot of controls to manipulate that state. Given the aim
of this injection code is to just test the flows when events occur,
inject the contents of the device health state as well.
Future work may add more sophisticate device health emulation
including direct generation of these records when events occur
(such as a temperature threshold being crossed). That does not
reduce the usefulness of this more basic generation of the events.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230530133603.16934-8-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Defined in CXL r3.0 8.2.9.2.1.2 DRAM Event Record, this event
provides information related to DRAM devices.
Example injection command in QMP:
{ "execute": "cxl-inject-dram-event",
"arguments": {
"path": "/machine/peripheral/cxl-mem0",
"log": "informational",
"flags": 1,
"dpa": 1000,
"descriptor": 3,
"type": 3,
"transaction-type": 192,
"channel": 3,
"rank": 17,
"nibble-mask": 37421234,
"bank-group": 7,
"bank": 11,
"row": 2,
"column": 77,
"correction-mask": [33, 44, 55,66]
}}
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230530133603.16934-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To facilitate testing provide a QMP command to inject a general media
event. The event can be added to the log specified.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230530133603.16934-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the stubbed out CXL Get/Set Event interrupt policy mailbox
commands. Enable those commands to control interrupts for each of the
event log types.
Skip the standard input mailbox length on the Set command due to DCD
being optional. Perform the checks separately.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230530133603.16934-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
